NEC LCD1800TM manual

USER’S GUIDE F or future reference , record the serial number of y our displa y monitor in the space below: SERIAL No . The serial number is located on the rear cov er of the monitor . A UT O-SCANNING WITH DIGIT AL CONTROL LCD COLOR DISPLA Y MONITOR MultiSync ® LCD1800 ™ SELECT ADJUST OSD OFF - + SIGNAL A/B Supplying Windows 95/98 INF File dow[...]

- III - RADIO INTERFERENCE REGULATIONS STATE- MENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gen- erates, uses[...]

- IV - Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environ[...]

- 1-1 - ENGLISH CA UTION Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards. Trademark IBM, PC, PS/2, PS/V, Personal System/2 are registered trade- marks of International Business Machines Corp. Apple Macintosh is a registered trademark of Apple Computer, Inc. Quadra is a trademark of Apple Computer, In[...]

- 1-2 - Congratulations on your purchase of the MultiSync LCD1800 ™ high resolution color LCD monitor. This guide tells you how to connect, adjust and care for your MultiSync LCD1800 monitor. This guide also pro- vides technical specifications and instructions for trouble- shooting any basic problems you may experience with your monitor. 1.1 Feat[...]

- 1-3 - ENGLISH 1.4 DDC The monitor includes the DDC TM 2B feature, more com- monly known as "Plug & Play". DDC(Display Data Chan- nel) is a communication channel over which the monitor automatically informs the computer about its capabililties (e.g. each supported resolution with its corresponding timing). DDC is routed through previ[...]

- 1-4 - Figure 2 Keep your fingers away from the pivot area of the tilt/swivel base. CAUTION 1.13 Unpacking After you unpack the box you should have all of the items indicated in Figure 1. Save the box and packing materials in case you ship or transport the monitor. Figure 1 1 2 3 4 1. Multisync ® LCD1800 ™ Monitor 2. Power Cord 3. AC-Adapter 4.[...]

- 1-5 - ENGLISH Turn on the computer. Turn on the monitor. If a problem appears. If the problem persists. Call for your authorized Product Support. See 6. TROUBLESHOOTING OK OK 1.15 Quick Operation Chart To summarize the steps in connecting your computer and adapter with MultiSync LCD1800 ™ color LCD monitor and setting the necessary controls and[...]

- 1-6 - SIGNAL A/B SELECT ADJUST - + OSD OFF 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and described individually. Figure 3 REAR Figure 4 FRONT 2.2 Function POWER SWITCH: A push-on / push-off switch for power input. POWER-ON INDICATOR: This indicator illu[...]

- 1-7 - ENGLISH Signal Cable High Resolution Graphic Video Card Figure 5 3.2 Signal Cable Connection The attached video signal cable provides a D-SUB-15P connector for the VGA compatible analog RGB outputs on your computer. Apple Macintosh Computers can also be interfaced using the optional Macintosh adapter. • The Sync-On-Green signal involving [...]

- 1-8 - 3.2.3 Connecting to Two Computers Figure 7 shows the signal cable connection to two com- puters. 1. Power off, the monitor and the computers. 2. Connect the one end of the equipped signal cable to the 15-pin connector on a computer. 3. Prepare signal cable. (For the signal cable, contact your dealer.) Connect the D-SUB-15P male connector of[...]

- 1-9 - ENGLISH - + - + Adjust by pressing or button. Select the item icon on Sub Menu by pressing button. Turn on the monitor. Press or to display the OSM screen. Select the group icon on Main Menu by pressing . Sub Menu Main Menu The monitor has an OSM (On Screen Manager) function. The following procedure shows how to adjust the screen with using[...]

- 1-10 -     Press and buttons together, to restore to the factory preset level. Press "ALL RESET" to restore to the factory preset level. To be deep of black color. To be light of black color. To move the image to the left. To move the image to the right. To move the image down. To move the image up. To display by TEXT mode. To res[...]

- 1-11 - ENGLISH To choose the language used on OSM. ENG...English, DEU...German, ESP...Spanish, FRA...French, ITA...Italian, JPN...Japanese To select the constant power mode. To select the power save mode. To restore to the fac- tory preset mode. 1. Press the right of select button and minus of adjust button together, the "CONTROL LOCK" [...]

- 1-12 - PROBLEM ITEMS TO CHECK Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in 7. SPECIFICATIONS. LOCATION • • • • • • • ?[...]

- 1-13 - ENGLISH LCD Panel 46cm/18.1" Color TFT Panel Type Active Matrix Resolution 1280 dots x 1024 lines Pixel Pitch 0.28mm Color Filter R, G, B vertical stripe type Face Finishing Anti-glare, Hard Coated Viewing Angle ±80°(Horizontal/Vertical) CR 5 Video 0.7Vp-p analog RGB Sync Sync.on Green or Separated H,V or Composite sync. Input Imped[...]

- 1-14 - NEC-Mitsubishi (hereinafter “NEC-MITSUBISHI”), warrants this Product to be free from defects in material and work- manship and, subject to the conditions set forth below, agrees to repair or replace (at NEC-MITSUBISHI’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of [...]