Panasonic TH-103PF10EK manual

Please read these instructions before operating your set and retain them for future reference. Model No. Operating Instructions High De fi nition Plasma Display English The illustration shown is an image. TH-103PF10EK[...]

2 Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r eceipt also, and not[...]

3 Important Safety Notice W ARNING 1) T o prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water ( fl ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked fl ame sources, such as lighted candles, should be placed o[...]

4 Safety Precautions W ARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) Always be sure to ask[...]

5 Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display . Do not stick any foreign objects into the Plasma Display . • Do not insert any[...]

6 Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display . • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwis[...]

+ + - - 7 Accessories Power supply cord × 2 Fixing bands × 2 Batteries for the Remote Control T ransmitter (2 × R6 (UM3) Size) Remote Control T ransmitter EUR7636090R Operating Instruction book Accessories Supply Check that you have the accessories and items shown Remote Control Batteries Requires two R6 batteries. 1. Pull and hold the hook, the[...]

1 2 AUDIO OUT RL AUDIO OUT RL SLOT1 SERIAL PC IN AUDIO SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN SLOT2 AUDIO DVI-D IN 8 Connections Note: At factory shipment, T erminal boards are installed in SLOT 2 and SLOT 3. – Cable fi xing bands Secure any excess cables with bands as required. Pass the attached cable fi xing band through [...]

AUDIO PC IN 1 6 7 8 3 9 4 5 10 15 14 13 12 1 1 2 9 Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input T erminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 1 10 kHz and vertical scanning frequency of 48 to 120 Hz. ([...]

6789 13 4 5 2 SERIAL 10 SERIAL T erminals connection Notes: • Use the RS-232C cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speci fi cation, so that the Plas[...]

SLOT2 AUDIO DVI-D IN SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN AUDIO OUT Y , P B , P R , OUT P R P B Y L R COMPONEN T VIDEO OUT 11 Connections DVI-D connection Mini-plug (M3) DVI-D video cable (Within 5 m) PC with DVI-D video out Pin No. Signal Name Pin No. Signal Name 1 T .M.D.S. data 2- 13 T .M.D.S. data 3+ 2 T .M.D.S. data 2+ [...]

PC 16:9 Italiano Español ENGLISH (US) English (UK) Deutsch Français OSD Language Set Select 12 Power On / Off Connecting the AC cord plug to the Plasma Display . Fix the AC cord plug securely to the Plasma Display with the clamper . (see page 8) Connecting the plug to the W all Outlet Notes: • Main plug types vary between countries. The power p[...]

MENU VOL ENTER/ + / - / INPUT .......(Japanese) .......(Chinese) Italiano Français Deutsch English(UK) Español ENGLISH(US) 1/2 Signal PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup 13 Initial selections Selecting the On-Screen Menu Language Press[...]

INPUT MENU VO L ENTER/ + / - / 14 Basic Controls Main Unit Right side surface Remote control sensor Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF ........ Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby .......[...]

Off timer 90 2 3 1 PC 4:3 15 Basic Controls Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 16, 17) SOUND button (see [...]

1/2 Picture Normal Normalise Normal 25 0 0 0 5 Brightness Sharpness Picture Mode Colour Contrast Hue 2/2 Picture Advanced settings White balance Colour Management Normal Off On 1/2 Signal PC Off Standby save Off Power management Of f Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup 2/2 Setup Sc[...]

INPUT MENU - / Sync P-NR Signal H-Freq. V -Freq. kHz Hz 33.8 60.0 [ RGB ] Cinema reality Block NR Mosquito NR Auto Off Off Off Off Cinema reality P-NR Signal [ Component ] Block NR Mosquito NR Off Off Off Off 3D Y/C Filter (NTSC) Colour system Signal Cinema reality Panasonic Auto (4:3) [ AV ] P-NR Block NR Mosquito NR On Auto Off 4:3 Off Off Off Se[...]

VOL ENTER/ + / 18 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. [During MUL TI PIP Operations] • Picture and Picture, Picture in Picture : • Others : Aspect switching is not possible. Notes: • For PC signal input, the mode switches between “4 [...]

0 Normal Normalise Auto Setup Pos. /Size V -Pos 0 H-Pos V -Size Dot Clock H-Size Clock Phase 1:1 Pixel Mode Off 0 0 0 0 0 0 0 Normal Normalise Pos. /Size V -Pos H-Pos 0 V -Size H-Size 1:1 Pixel Mode Off Auto Setup 19 Adjusting Pos. /Size 1 Press to display the Pos. /Size menu. Press to select Auto Setup / H-Pos / H-Size / V -Pos / V -Size / Dot Clo[...]

20 Adjusting Pos. /Size While the Pos. /Size display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings. Helpful Hint ( / Normalise Normalisation) Auto Setup Automatically adjust H-Pos / V -Pos / Cl[...]

AB A B A B BA B A B A PC1 VIDEO2 PC1 VIDEO2 VIDEO2 VIDEO1 PC1 VIDEO2 A A A C B B B D MUL TI PIP MUL TI PIP MUL TI PIP SW AP SWAP SW AP SELECT 21 MUL TI PIP Press repeatedly . Each time pressing this button main picture and sub picture will be displayed as follows below . Press to swap main picture and sub picture. [Picture out Picture] Press to sel[...]

One screen Advanced PIP Main screen Sub screen 12 3 65 4 Options On Weekly Command Timer Onscreen display Off Initial INPUT Initial VOL level 1/3 Off Off 0 0 Maximum VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP 22 Advanced PIP 1 2 3 5 Press to display the Setup menu. Press to select “OSD Language”. Press and [...]

1/2 Picture Normal Normalise Normal 25 0 0 0 5 Brightness Sharpness Picture Mode Colour Contrast Hue 2/2 Picture Advanced settings White balance Colour Management Normal Off On Advanced settings Normal Normalise 0 0 2.2 Off 1/2 Black extension AGC Gamma Input level Advanced settings 0 0 0 0 0 0 2/2 W/B Low B W/B High R W/B Low R W/B Low G W/B High [...]

24 Picture Adjustments Notes: • “Colour” and “Hue” settings cannot be adjusted for “RGB/PC” and “Digital” input signal. • Y ou can change the level of each function (Contrast, Brightness, Colour , Hue, Sharpness) for each Picture Mode. • The “Hue” setting can be adjusted for NTSC signal only during “A V (S Video)” inpu[...]

Sound Normal Normalise 0 0 0 Off T reble 0 Mid Balance Bass Surround Main Audio Out (PIP) 1/2 A B INPUT1 PC A B INPUT1 PC 25 Sound Adjustment 1 Press to display the Sound menu. Press to select the menu to adjust. Select the desired level by listening to the sound. 2 Select to adjust each item. While the “Sound” menu is displayed, if either the [...]

2/2 Sound Out Left Channel Right Channel Channel 1 Channel 1 Off Level Meter Off SDI Sound Output On Surround 26 Notes: • This menu is available only when selecting a slot that HD-SDI T erminal Board with audio (TY -FB10HD) is installed. • This menu is unavailable when 2-picture display mode is active. SURROUND This menu is displayed when HD-SD[...]

1 Exit INPUT MENU VOL ENTER/ + / - / 2 EXIT 2 × 1 × 2 × 3 × 4 27 Digital Zoom 1 3 2 4 This displays an enlargement of the designated part of the displayed image. Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. Select the area of the image to be enlarged. Press on the enlargement location to sele[...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 2/2 Setup Screensaver MUL TI DISPLA Y Setup Set up TIMER Portrait Setup PRESENT TIME Setup PRESENT TIME Setup PRESENT TIME MON 99:99 Set PRESENT TIME 99:99 DA Y MON PRESENT TIME Setup PRESEN[...]

Set up TIMER POWER OFF Function POWER OFF T ime POWER ON T ime POWER ON Function Of f 0:00 Off 0:00 PRESENT TIME 99:99 Set up TIMER POWER OFF Function POWER OFF T ime POWER ON T ime POWER ON Function Of f 0:00 Off 0:00 PRESENT TIME 99:99 29 PRESENT TIME Setup / Set up TIMER Set up TIMER Press to select POWER ON T ime / POWER OFF T ime. Press to set[...]

2/2 Setup Screensaver MUL TI DISPLA Y Setup Setup TIMER Portrait Setup PRESENT TIME Setup Screensaver Start Function Mode Side panel Wobbling Peak limit Finish T ime Start T ime White bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Finish T ime Start T ime White bar scroll Off[...]

Screensaver Start Function Mode Side panel Wobbling Peak limit Finish Time Start Time White bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side panel Wobbling Peak limit Operating Time Periodic Time White bar scroll Interval 6:15 12:30 High Off Off PRESENT TIME 99:99 Screensaver Start Function Mode Side pa[...]

Screensaver Start Function Mode Side panel Wobbling Peak limit Finish T ime Start T ime White bar scroll Off 6:15 12:30 High Off Off PRESENT TIME 99:99 32 Screensaver (For preventing image retention) Side Panel Adjustment 1 Press to select Side panel. Press to select Off, Low , Mid, High. Press to exit from Screensaver . 2 Do not display a picture [...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 33 Reduces power consumption P[...]

2/2 Setup Screensaver MUL TI DISPLA Y Setup Setup TIMER Portrait Setup PRESENT TIME Setup × 2 MUL TI DISPLA Y Setup Horizontal Scale Off A1 Off AI-synchronization V ertical Scale Location Off Seam hides video × 2 MUL TI DISPLA Y Setup 34 Press to display the Setup menu. Press to select the MUL TI DISPLA Y Setup. Press to display the “MUL TI DIS[...]

Off AI-synchronization × 2 Horizontal Scale Off Off A1 Location V ertical Scale Seam hides video × 2 MUL TI DISPLA Y Setup MUL TI DISPLA Y Setup Off AI-synchronization × 2 Horizontal Scale Off Off A1 Location V ertical Scale Seam hides video × 2 MUL TI DISPLA Y Setup MUL TI DISPLA Y Setup A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 C1 C2 C3 C4 C5 D1 D2 D3 D4[...]

MUL TI DISPLA Y Setup Off Off MUL TI DISPLA Y Setup Horizontal Scale V ertical Scale Seam hides video A1 Location × 2 × 2 AI-synchronization Off 36 Setup for MUL TI DISPLA Y 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 Notes:[...]

2/2 Set up Screensaver MUL TI DISPLA Y Setup Portrait Setup Set up TIMER PRESENT TIME Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup 37 (Example) Set up for Portrait Press t[...]

Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup 38 Press to select Viewing Area or Location. Press to select each functions. Notes: • When the input signal is 16:9, Viewing Area [...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 3D Y/C Filter (NTSC) Colour sy[...]

1/2 PC Off Standby save Off Power management Of f Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 3D Y/C Filter (NTSC) Colour system Signal On Auto Cinema reality Panasonic Auto (4:3) Off 4:3 [ AV ] Block NR Mosquito NR Off P-NR Off Off Cinema reality Signal Off H-Freq. V -Freq. kHz Hz [...]

1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup 3D Y/C Filter (NTSC) Colour system Signal On Auto Cinema reality Panasonic Auto (4 : 3) Off 4 : 3 [ AV ] P-NR Off 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Lang[...]

Sync Auto Sync on G Sync VBS 1/2 PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Signal Power save Setup Sync P-NR Signal Auto [ RGB ] Cinema reality Off Off H-Freq. V -Freq. kHz Hz 33.8 60.0 42 Select Signal from the “Setup” menu during RGB input signal. Press [...]

Options Weekly Command Timer Initial VOL level 1/3 Off Off 0 0 Maximum VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP Initial INPUT Onscreen display On O f f 43 Options Adjustments Item Effect Adjustments Weekly Command Timer Sets Weekly Command Timer . (see page 47) Onscreen display On Off On: Displays all the fol[...]

Options On Weekly Command Timer Onscreen display Off Initial INPUT 1/3 Maximum VOL level Initial VOL level Button lock INPUT lock Advanced PIP Remocon User level Off Off 0 0 Off Off Off Off 44 Options Adjustments Item Effect Adjustments Initial VOL level Off On Press button to adjust the volume when the unit is turned on. Off On Off: Sets normal vo[...]

Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 2/3 45 Options Adjustments Item Effect Adjustments Off-timer function Enable Disable Enable: Enables the “Off-timer function”. Disable: Disables the “Off-timer function”. Note: When “Disable?[...]

3/3 Options O f f Off Off V . lnstallation Rotate Slot1 Serial Slot Select Slot power Off Power On Screen Delay 46 Options Adjustments Item Effect Adjustments Slot Power Off Auto On Off: Power is not transmitted to the slot power . Auto: Power is transmitted to the slot power only when main power is on. On: Power is transmitted to the slot power wh[...]

Options On Weekly Command Timer Onscreen display 1/3 Weekly Command Timer On Program1 Function Monday Program3 T uesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit Weekly Command Timer Program1 On Monday Function Program3 T uesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sun[...]

Weekly Command Timer 20:00 20:30 57 58 8/8 22:00 59 --:-- 60 --:-- --:-- 61 --:-- 62 --:-- A VL:00 DAM:NORM POF --- --- --- --- --- 63 64 1 Program Weekly Command Timer 8:00 10:30 02 01 1/8 --:-- 03 --:-- 04 --:-- --:-- 05 12:00 06 9:12 PON IMS:SL1 --- --- --- --- DAM:ZOOM A VL:10 07 08 1 Program Weekly Command Timer 02 10:30 Command No T ime IMS:S[...]

1/2 Signal PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup SHIPPING YES 49 Shipping condition This function allows you to reset the unit to the factory setting. 1 2 3 4 Press to display the Setup menu. Press to select “OSD Language”. Press and h[...]

50 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

51 DVI-D/COMPONENT/RGB/PC input signals Applicable input signals for Component / RGB, Mini D-sub 15P , DVI-D ( * Mark) Signal name Horizontal frequency (kHz) V ertical frequency (Hz) Component / RGB / Mini D-sub 15P (Dot clock (MHz)) DVI-D (Dot clock (MHz)) 1 525 (480) / 60i 15.73 59.94 * (13.5) 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 4 * (27.0)[...]

52 Command list of W eekly Command T imer No. Command Control details 1 AAC:MENCLR ∗ 1 Audio Menu (Clear) 2 AAC:MENDYN ∗ 1 Audio Menu (Dynamic) 3 AAC:MENSTD ∗ 1 Audio Menu (Standard) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 ASO:M Audio out when PIP mode (Main Picture) 9 ASO:S [...]

53 Speci fi cations TH-103PF10EK Power Source 220 - 240 V AC, 50/60 Hz Power Consumption Power on 1,500 W Stand-by condition Save off 1.0 W , Save on 0.9 W Power off condition 0.5 W Plasma Display panel Drive method : AC type 103-inch, 16:9 aspect ratio Screen size 2,269 mm (W) × 1,277 mm (H) × 2,604 mm (diagonal) (No.of pixels) 2,073,600 (1,920[...]

54 Memo[...]

55 Memo[...]

Information on Disposal for Users of W aste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated c[...]