Planar PXL2471MW manual

www .planar .c om USER'S GUIDE LED LCD Monitor PXL247 1 MW[...]

Content Operation Instr uctions ......................................................................................................... .......................................... 1 Unpacking In structions ......................................................................................................... .....................................[...]

Operation Instructions Thank you for purchasing the PXL2471MW LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rul[...]

C OMMUNIQUE D’ A VERTISSEMENT DE LA FC C C ONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE P AR LA FC C) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour offrir une pr[...]

3 Unpacking Instructions  Remove the LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam.  Remove base from plastic bag and attach to base.  Adjust the display between -5° and 15°. Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the li[...]

Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire :  Éteindre le produit avant de le nettoyer.  La sur face de l'écran tactile peut être nettoyée a vec un chiff on doux et propr[...]

Package Overview LED LCD Monitor Base P ower C ord VGA Cable Display P or t Cable Audio Cable User ’ s Guide 5[...]

First Setup Install the stand base 1. Lay the LED L CD Monitor flat on a table with the LED screen face down. T o prevent the LED L CD Monitor from being scratched , put a piece of soft cloth on the table on which the screen will be set. 2. Unpack the base, one hand hold the monitor, the other hand to pivot the stand. 3. T urn the screw clockwise t[...]

Front View of the Product ① ② ③ ④ ⑤ ⑥ ① OSD Turn On/ Off ② Scroll Down/ Adjust Decrease/ Audio Adjust/ Auto * ③ Scroll UP/ Adjust Increase/ Picture Mode * ④ Input select/ Confirm Selection ⑤ Power On/ Off ⑥ LED Indicator * Hot keys Instruc tions please see “Using the OSD Menu ” on page 10. 7[...]

Rear View of the Product ① ② ③ ④ ⑤ ⑥⑦ ① Power Input ② Cable Management ③ DisplayPort Input (DisplayP or t 20 pin) ④ HDMI input (HDMI 19 pin) ⑤ VGA Input (D-Sub 15 pin) ⑥ Audio Input ⑦ Headphone Jack 8[...]

Quick Installation 1. Connect either VGA, HDMI or DisplayPort Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Please note. The monitor ships with DisplayPort and HDMI cables only. VGA cable may be sourced separately from a cable supplier. 2. Connect the audio cable from audio output of computer to[...]

Basic Operation and Calibration/Reset Instructions Before using the LED LCD Monitor:  Connect external equipment properly.  Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the front. The power LED indicator light will be blue when the LED LCD Monitor is on.[...]

Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The LED LCD Monitor will show a “Power Button Locked” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. 11[...]

Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Pr ess the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu. Short Cuts Function from the button(s) AUTO IMAGE ADJUST: To auto adjust Horizontal Position , Vertical Position, Phase (Fine Tune) and Clock (H. [...]

INPUT SELECT: When Input Select is pressed, change Input signal to VGA, HDMI, DISPLAY PORT or AUTO. AUDIO ADJUST: To adjust the audio functions. VOLUME: To adjust the volume of speaker output. MUTE: To turn the Mute ON/OFF. A UDIO INPUT: When in HDMI input, select where the audio source comes fr om AUDIO IN or HDMI. When in DisplayP ort input, sele[...]

VIDEO MODE ADJUSTMENT: To select the video mode from FULL SCREEN or ASPECT RATIO. SETUP MENU: To set up LANGUAGE SELECT, OSD POSITION, OSD TIME OUT, OSD BACKGROUND and LED mode. LANGUAGE SELECT: To allow users to choose from available languages. OSD POSITION: Press ▲ or ▼ button to select between horizontal and vertical OSD Position adjustment.[...]

About the Stand The stand allows you t o easily adjust the height, swivel , tilt, and por trait mode of your monitor t o provide maximum er gonomic comfor t. 1) Height adjustment 2) Swivel 45° 45° 1 10mm 3 ) T i l t 4 ) P i v o t -5~15° 90° 90° 15[...]

Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 960 @ 60H[...]

Technical Information Panel 23.6” TFT (wi th L ED ba ck lig ht ) Power Management On: 3 2 Watts (typical), 3 5 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.2715 x 0.2715 mm Display Color 16.7M Tilt -5°~15° Active Display Area 20.52&q[...]

Wall-Mount Installation Instructions Pr eparing to Install the Optional W all Mount Arm (not included) This LED L CD Monitor can be attached to a wall mounting arm purchased separat ely . T urn the power OFF then disconnect the cables from the LED L CD Monitor befor e per forming the pr ocedure below . 1. Lay the LED L C D Monitor face down on a so[...]

Troubleshooting No power  Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the LED LCD Monitor .  Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.  Make sure all signal cables are installed. Power on but no screen image[...]

20 Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com . Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Tec hnic[...]

2014 2001132475T[...]