Siemens 2010 Tango manual

Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Gigas et 20 1 0 T ango bk_front.fm5 18.7.99 ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg. Falz-Ausklappseite s The cordless digital DECT telephone system expandable to 6 handsets Operating instructions Before starting up the equipment, please read these operating instruction[...]

kap00.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Gigaset® 2 01 0 T ango Signposts Switching the telephone on ( ➔ page 1). Making a call ( ➔ page 24). Registering new handsets at the base station ( ➔ page 48). Internal calls ( ➔ page 28). Making the first call Using additional handsets Quick reference guide ( ➔ page 54 [...]

kap00.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Overview: Gigaset 20 10 T ango 1 2 3 4 5 6 7 8 9 10 11 12 Earphone Display St ore key Speed dial (delete) key On-hook key Inter com key Star key Recall key Mi c ro ph on e ON/OFF/PROTECTED key Last Number Redial Off-hook key 13 14 15 16 17 18 19 20 21 Pound key Paging key (calling [...]

kap00.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Overview: Keys Keys on the base station Keys on the Gigaset 2000S T ango mobile unit ? Green paging key to call all handsets or to register new handsets. B Memory key to initialize procedures. C Speed dial and delete ke y . O Redial key (also used for procedures). 1 t o 0 , * an d [...]

A1 kap00.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Overview: Key functions and display symbols Display Symbols (top line) Display symbols (bottom line) All digits and characters are displayed on the top line, while the symbols for various operating modes are dis- played on the bottom line. A f N b E F G H u P z A H n - 8 8 8 8 8[...]

A2 kap00.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Overview: Meaning of symbols ➔ page 2 (cross-reference to a related topic). B #* 5 Press keys in this sequence. ? Press key from the base station. Q Delete function of the speed dial ke y. 1 ... 6 Press one of the following keys. o Enter numbe r . If it is necessary you will s[...]

A3 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 kap01.fm5 18.7.99 Safety precautions ● Do not submerge batteries in water; do not throw them into fire. ● Do not dispose of old, defective batteries with normal household garbage. ● Batteries become warm during charging. This is nor- mal and not dangerous ● Do not use any third-party char[...]

A4 kap01.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Certification and CE marking Siemens Gigaset ‚ 2010 T ango meets the requirements contained in the EU guideline: 89/336/EEC “Electromagnetic compatibility”. The handset Siemens Gigaset 2000S T ango carries the "CE" symbol. A4[...]

Contents giga2010.IVZ 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Stepwise start-up ........................................................................................................................ 1 Step 1: Observe the safety precautions ......................................................................................... [...]

Contents giga2010.IVZ 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Base station settings ................................................................................................................. 32 Switching the base station ringer off and setting the ringer volume ........................................... 32 Setting the base[...]

Stepwise start-up 1 kap02.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Stepwise start-up Step 1: Observe the safety precautions Step 2: Check the contents of the package The factory package contains: ● a Gigaset 20 10 T ango base station , ● a Gigaset 2000S T ango handset, ● a phone cord, ● a power cord with RJ- 11 plug and[...]

Stepwise start-up 2 kap02.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Step 3: Connecting the base station Phone cord Insert the RJ- 1 1 plug on your phone cord into the base station. The jack on the bottom of the base station is marked with the following symbol: Insert the phone plug on your phone cord into your phone socket. Powe[...]

Stepwise start-up 3 kap02.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Step 4: Inserting the batteries into the handset The handset is powered by two batteries. Hold the handset with the keypad side facing down. Slot the batteries into the battery compartment. Slide the cover of the battery compartment from above into the grooves i[...]

Stepwise start-up 4 kap02.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Step 6: Check signalling method T elephone lines can use the following signalling methods: ● dial pulsing (DP) ● dual-tone multifrequency signalling (DTMF) The factory default for your Gigaset 2 01 0 T ango is DTM F . Checking your own telephone ’s signall[...]

Notes on operation 5 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Notes on operation Installing the base station Installation site/installation area ● A 220/230V (AC adapter C39280-Z4-C59) or 11 0/120V (AC adapter C39280-Z4-C69) power socket must be lo- cated at the installation site. ● In order to avoid interference, the[...]

Notes on operation 6 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Notes on operating the handset For users who wear hearing aids If you wear a hearing aid, please note that radio signals can interfere with hearing aids, and if sufficiently loud, can cause a very unpleasant humming sound. Using rechargeable batteries The follo[...]

Notes on operation 7 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 When installing and using the rechargeable batteries, please follow the rules below: ● Initially charge the batteries thoroughl y . We recom- mend charging the batteries for approximately 16 hours without interruption (overnight for example). During the first[...]

Notes on operation 8 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Mounting the carrying clip onto the handset If required, you can mount the carrying clip supplied with the handset, e.g. if you wish to carry the handset in your pocket. Hold the handset with the keypad facing the palm of your hand. Y ou will see two small hole[...]

Notes on operation 9 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 T echnical data Standard: DEC T , GAP Number of channels: 120 duplex channels Radio frequency range: 1910 MHz to 1930 MHz Duplex method: Time-division multiplexing, 10 ms frame length Channel grid: 1728 kHz Bit rate: 11 52 kbit/s Modulation: GFSK Voice coding: [...]

Notes on operation 10 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Third party use/disposal Gigaset 2 01 0 T ango telephone should only be passed onto third parties if the instructions for use are included. When the system or batteries have reached the end of their service life, they should be disposed of in an environ- menta[...]

Notes on operation 11 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Procedure in the case of malfunctions Not every malfunction means that there is an actual de- fect in your telephone. In some situations you may save time and money if you can eliminate the cause of simple faults yourself. The information below will help you d[...]

Notes on operation 12 kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Overview: Signal tones tuuuuut tuuuut tuuuut tuuuut tut tut tut tut tut tuuuut tut tuuut tuuuuut tuuut tuuut 0.8 s tone 0.8 s pause Recall: 3 x 0.2 s tone repetition following 0.8 s pause Internal dial tone: 0.5 s tone 0.5 s pause Internal busy tone 0.5 s tone[...]

Operating modes 13 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Operating modes ON/OFF/PROTECTED modes Y ou can switch your handset to ● protected mode, ● off, ● and on (again). When the handset is in protected mode , it is protected against unintended use. The handset switches on auto- matically to receive incoming cal[...]

Operating modes 14 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Switching on the handset When the handset is in protected mode: When the handset is switched off: Switching off the handset h Press the handset key briefl y . Y ou will hear the positive confirmation beep. The following message appears on the display when the han[...]

Operating modes 15 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Signalling method The PTT operates telephone connections with two differ- ent signalling methods: ● Dial pulsing (DP) ● Dual-tone multifrequency signalling (DTMF) The factory default setting for your Gigaset 2 01 0 T ango is DTM F . Checking the signalling me[...]

Operating modes 16 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Operating in a telephone system T o be able to operate your Gigaset 2 01 0 T ango in a tele- phone system, you must first 1 . switch off the automatic attenuation function 2. check the signalling method, 3. enter the exchange code, 4. enter the pause lengths afte[...]

Operating modes 17 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Setting the flash time in dual-tone multifrequency signalling (DTMF) Exchange codes For through connection to the public telephone network you must set: ● the exchange code ● the pause length after the exchange code (if a pause is necessary after entry of the[...]

Operating modes 18 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Entering the exchange code The exchange code has one to three characters and can comprise the digits 0 to 9 and the : , # and R keys. Modify the pause length according to the exchange code Deleting the exchange code B # 0 Start the setting procedure. o Enter the [...]

Operating modes 19 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Changing the system code, changing the PIN T o protect your personal settings, Gigaset 2 01 0 Tango has two code numbers, a fou r -digit system code and a fou r - digit handset PIN (personal identification number). The factory defaults are as follows: ● System [...]

Operating modes 20 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Resetting the base station to factory defaults Y ou can use this procedure to reset the following settings to factory defaults: ● Signalling method (DTMF/flash 100 ms) ➔ page 15 ● Pause length following exchange code (3 seconds) ➔ page 18 ● Call allocat[...]

Operating modes 21 kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Resetting the Gigaset 2000S T ango handset to factory defaults Y ou can use this procedure to reset the following settings to factory defaults: ● Ringer volume ( ➔ page 34) ● Ringer tone ( ➔ page 34) ● Handset volume ( ➔ page 35) ● Base station numb[...]

Incoming calls 22 kap05.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Incoming calls Accepting calls An incoming call is indicated by the ringe r . Y ou will know that it is an external call when you the following message appears on your handset display: Y ou will know that you are receiving an internal call if you see the following[...]

Incoming calls 23 kap05.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 External call-waiting during internal calls If you are on an internal call with a second handset and a external call arrives, this is indicated by the call-waiting function. Y our internal call is terminated when you accept the external call. The arrival of the ex[...]

External outgoing calls 24 kap06.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 External outgoing calls Calling external subscribers Y ou will hear the ring tone. Dialling with call number checking (en-bloc dialling) En-bloc dialling allows you to check the external call number entered before it is dialled and correct it, if nec- ess[...]

External outgoing calls 25 kap06.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Manually inserting a pause If you repeatedly get the busy symbol following automat- ic dialling from the telephone director y, e.g. after the country code, you can enter a pause (three seconds), e.g. between the exchange or country code and the call numbe[...]

External outgoing calls 26 kap06.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Dialling speed dial numbers Y ou can dial a call number by pressing the digit key used to store the number ( ➔ page 37). Dialling with speed dial numbers and number check c Press off-hook key. Y ou will hear the dial tone. Q o Press speed dial key and e[...]

External outgoing calls 27 kap06.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Device control using dual-tone multifrequency signalling (DTMF) If your telephone is connected to a line with dial pulsing (DP), you can switch to dual-tone multifrequency signal- ling (DTMF) once the connection has been set up. Precondition: an external [...]

Collective ringing and internal calls 28 kap07.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Collective ringing and internal calls Making collective calls to all handsets from the base station It can be useful to make a collective call from the base station, for example, to locate mislaid handsets. It is not possible to make interna[...]

Collective ringing and internal calls 29 kap07.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Checking your own internal number Allowing internal parties to listen in on a call It is possible to enable an internal party to listen in on a call with an external party from his/her handset. Precondition: An external connection must be al[...]

Internal consultation calls and transferring calls 30 kap08.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Internal consultation calls and transferring calls During a external call it is possible to: ● hold a consultation call with an internal part y , ● transfer the external call to the internal part y. Consultation calls When m[...]

Internal consultation calls and transferring calls 31 kap08.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 T ransferring calls When more than one handsets are in operation It is possible to transfer an external call to an internal party when more than one handset is in operation ( ➔ page 48). When a telephone system is in operation[...]

Base station settings 32 kap09.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Base station settings Y ou can program your Gigaset 2 01 0 T ango to suit your own individual requirements. The settings are made from a registered handset. Switching the base station ringer off and setting the ringer volume It is possible to define whether[...]

Base station settings 33 kap09.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Setting the base station ringer tone It is possible to define the tone used to signal calls at the base station. Y ou can choose from a range of six tones. The factory default is level 1 . Switching music-on-hold on/off If you are connected to an external u[...]

Handset settings 34 kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Handset settings Y ou can program your handset to suit your own individual requirements. All settings are made directly on the hand- set. Setting the ringer volume Y ou can set the ringer volume in the handset on 6 levels. These range from level 1 = low to level[...]

Handset settings 35 kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Setting the handset volume The handset has three volume settings: The factory default is level 1 (normal). Activating/deactivating automatic call acceptance If automatic call acceptance is activated, calls are accept- ed when the mobile unit is removed from the [...]

Handset settings 36 kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Activating/deactivating notification and warning tones It is possible to switch the following notification tones on and off: ● Key confirmation ● Battery warning ● Range warning ● Positive confirmation ● Error beep ● Synchronization tone All tones ca[...]

Handset settings 37 kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Speed dial numbers Y ou can store speed dialling numbers for frequently re- quired external numbers. These speed dialling codes can then be used for calling outside numbers ( ➔ page 26). Checking or store speed dial numbers Y ou can call up the memory configur[...]

Handset settings 38 kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Notebook function Y ou can store a directory number as a speed dial number during a call. Clearing all speed dial numbers B Q Initiate procedure. o Select speed dial number: enter digits from 0 to 9. The speed dial number and the current memory assignment will a[...]

Handset settings 39 kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Activating/deactivating the call duration display In the case of external calls ( ➔ page 24), the call duration display is started approximately 12 seconds after the last digit is dialled. The display remains visible for about four seconds after the call is fi[...]

The Gigaset 2010 Tango lock functions 40 kap13.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 The Gigaset 2 01 0 T ango lock functions Activating/deactivating the Gigaset 2 01 0 T ango lock for outgoing calls It is possible to lock the Gigaset 2 01 0 T ango for outgoing calls. If emergency numbers are stored, they can be dialled even[...]

The Gigaset 2010 Tango lock functions 41 kap13.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Displaying and storing emergency numbers Deleting all emergency numbers B # 2 5 Start the setting procedure. o O Enter the fou r -digit system code (factory default “0000“) ( ➔ page 19). The first emergency number stored in the memory [...]

The Gigaset 2010 Tango lock functions 42 kap13.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Barred numbers for handsets By storing barred numbers for each registered handset, you can prevent certain external call numbers or types of number from being dialled if the call number lock is acti- vated ( ➔ page 43). Thus, for example, [...]

The Gigaset 2010 Tango lock functions 43 kap13.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Deleting all barred numbers Activating/deactivating the call number lock Y ou can activate and deactivate the call number lock sep- arately for each registered handset. Other handsets are not affected by the lock. Calls can still be accepted[...]

The Gigaset 2010 Tango lock functions 44 kap13.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Setting trunk access for the handsets Y ou can define for each registered handset whether ex- ternal calls can be made from it or not. A distinction is made between: ● Unrestricted trunk access (factory default) – exter- nal calls allowe[...]

Lock functions on the handset 45 kap14.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Lock functions on the handset It is possible to lock both the entire Gigaset 2 01 0 T ango telephone and individual handsets against unauthorized use. Depending on the type of lock you select, DSS or emer- gency numbers can still be called from the [...]

Lock functions on the handset 46 kap14.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 DSS number for handset lock Y ou can store one DSS number which can be dialled when the handset is locked. The DSS number can be a number where you can be reached in your absence. Display or store a DSS number The DSS number must not be the same as [...]

Lock functions on the handset 47 kap14.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Deleting a DSS number Handset display with active lock Display with locked handset Display with system lock Display with call number lock Display with outward-restricted trunk access or internal access B 8 8 Start setting procedure. o Enter the hand[...]

Operating more than one handset 48 kap15.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Operating more than one handset Registering/de-registering more than one handsets at the base station Y ou can operate up to six handsets from the Gigaset 2000 T ango family at a Gigaset 2 01 0 T ango base station. The handset supplied with your t[...]

Operating more than one handset 49 kap15.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 De-registering a handset from a base station Ring priority for incoming calls It is possible to set how incoming calls should be sig- nalled when operating several handsets. A distinction is made between: ● Collective call (factory default) – [...]

Operating more than one handset 50 kap15.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Excluding or including a handset from/into collective ringing Selecting a handset for ring priority Setting the number of rings for ring priority B # 1 Start the setting procedure. o Enter the fou r -digit base code (factory default:”0000“) ( [...]

Operation at more than one base station 51 kap17.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Operation at more than one base station Y ou can register and operate your handset at up to 4 Gigaset T ango base stations. This offers the following advantages: ● Y ou can operate the same handset at base stations in different geographi[...]

Operation at more than one base station 52 kap17.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Activating/deactivating base station number display on handset Y ou can program your handset to display the base station with which the unit has radio contact. Selecting the best station Normall y, radio contact is automatically re-establi[...]

Operation at more than one base station 53 kap17.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Setting the preferred station We recommend that you define a preferred base station if the handset is located in an overlap area between two or more base station radio areas. This means you no long- er need to change stations frequentl y .[...]

Quick reference guide handset Gigaset 2000S Tango 54 kap20a.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Quick reference guide handset Gigaset 2000S T ango Switch handset to ON/OFF/PROTECTED: h Accepting a call: Call rings: remove the handset from the charging unit or press the off-hook key c (it is possible to set the auto- matic [...]

Index 55 giga2010.SIX 18.07.1999 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 B Barred numbers deleting ................................................... 43 details ..................................................... 42 displaying ................................................ 42 storing ..................................................[...]

Index 56 giga2010.SIX 18.07.1999 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 PIN .......................................................... 19 quick reference guide ............................. 54 resetting to factory defaults ................... 21 ring priority .............................................. 49 saving a DSS number .........[...]

Index 57 giga2010.SIX 18.07.1999 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 Signalling method at a telephone system ............................ 16 checking ................................................... 4 details ..................................................... 15 setting ................................................. 4 , 15 Sp[...]

kap21.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619 U5 Issued by the Private Communication Systems Group Hofmannstrasse 5 1 , D-81359 München © Siemens AG 1998. All rights reserved. Subject to availability. Right of modification reserved. Siemens Aktiengesellschaft http://www.siemens.de Ref. no. A30852-X 11 00-B313-1-7619 Printed [...]