Silvercrest SKRD 30 A1 manual

U nder-C abinet Radio SKRD 30 A1 6 K OMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www .k ompernass.com ID-Nr .: SKRD 30 A1-09/10-V3 Under -Cabinet Radio Operating instructions[...]

SKRD 30 A1 A B 1 2 3 zt 4 u i opp 5 6 7 8 9 0 q w e r[...]

1 SKRD 30 A1 GB IE Inde x Introduction . . . . . . . . . . . . . . 2 Information for these operating instructions . . . . . . . . . . . . . . . . . . . . 2 Copyright . . . . . . . . . . . . . . . . . . . . . 2 Proper usage . . . . . . . . . . . . . . . . . . 2 W arning notices . . . . . . . . . . . . . . . . 3 Safet y . . . . . . . . . . . . . . . [...]

2 Introduction SKRD 30 A1 GB IE Introduction Information for t hese operating instructions These operating instructions are a component of the Under -Cabinet Radio SKRD 30 A1 (henceforth designated as the device) and they pr ovide you with important information about the intended use, safet y , installation and connection as well as oper ation of t[...]

3 Introduction SKRD 30 A1 GB IE W arning notices In the current operating instructions the follo wing warning notices are used: DANGER A warning in this danger lev el indicat es a hazard threatening situation. In the e v ent that the hazardous situation is not avoided it can lead to death or serious injur y . The directiv es in this warning are the[...]

4 Introduction SKRD 30 A1 GB IE Safet y In this section you r eceive important safet y information regar ding handling of the device. This device complies with the statutory safet y regulations. Incorrect usage can lead to injuries and propert y damage. Danger from electric shoc k DANGER Risk of fat al electrocution! A lif e-thr eatening situation [...]

5 Introduction SKRD 30 A1 GB IE Basic Safet y Instructions For safe handling of the de vice obser v e the following safety instructions: Before use check the de vice for visible external damage. Do not put into ■ operation a de vice t hat is damaged or has been dr opped. Damaged cables or connections should be replaced b y authorised qualifi ed [...]

6 Operating com ponents SKRD 30 A1 GB IE Operating components (for illustr ations see fold out sides fi gure A) Mounting plate/Stand 2 Control panel 3 Display 4 On/Off : On/Off switch (Radio) 5 AO T: Timer switch off 6 Lock/Mem.: Button lock/memor y slot selection 7 Bass/AMS/Mode: Bass accentuation/Station search/Access setting menu 8 Alarm 1: [...]

7 Setting up and connecting SKRD 30 A1 GB IE Setting up and connecting Safet y instructions W ARNIN G Damage may occur to pr opert y and injuries to people when operating the device! Obser v e the following safety instructions to avoid dangers: Pack aging material should not be used as a play thing. There is a risk of ► suff ocation! T o avoid r[...]

8 Setting up and connecting SKRD 30 A1 GB IE Disposal of t he packaging The packaging pr otects the device from transport damage. The packaging ma- terials are selected fr om the point of view of their en vironmental friendliness and disposal technology and are therefor e recyclable. The recir culation of packaging into the material cir cuit saves [...]

9 Setting up and connecting SKRD 30 A1 GB IE Inserting t he batter y By inserting the batter y you can avoid the loss of pr ogrammed time of day and alarm times in the ev ent of a possible pow er outage. The batter y ensures that the internal clock continues to run ev en during a pow er failure. When pow er is restored the corr ect time appears aut[...]

10 Setting up and connecting SKRD 30 A1 GB IE Disassembly Press both unlocking buttons ♦ 20 on the rear panel of the device do wnwar ds, thereb y sliding, at the same time, the device forward and then remo ve the device do wnw ards. Unscrew the scr ews on the mounting plate ♦ and remo ve the mounting plate . Setting up the device As an alternat[...]

11 Handling and operation SKRD 30 A1 GB IE Handling and operation In this section you r eceive important information for the handling and operation of the device. Switc hing On and Off After the device has been connected to the power supply it is alr eady switched on. Via the On/Off 4 button y ou switch between the operational modes clock/ standb[...]

12 Handling and operation SKRD 30 A1 GB IE Setting the time Prerequisit e: The de vice is in the operational mode clock/standb y operation. Press the Bass/AMS/Mode ♦ 7 button once. The time of day indicator begins to blink. Set with the buttons T une+ ♦ 13 and T une– 12 the current time of day . With each button press the time of day changes [...]

13 Handling and operation SKRD 30 A1 GB IE Adjus ting the display brightness Prerequisit e: The de vice is in the operational mode clock/standb y operation. Press the Bass/AMS/Mode ♦ 7 button three times. The current setting for the display brightness is shown ( H =bright or L =dim). Set, with the button T une+ ♦ 13 , the display brightness to [...]

14 Handling and operation SKRD 30 A1 GB IE Setting the time of da y format Prerequisit e: The de vice is in the operational mode clock/standb y operation. Press the Bass/AMS/Mode ♦ 7 button fi ve times. The curr ent setting for the time of day format is shown ( 24 =24 hour format or 12 =12 hour format). With the button T une+ ♦ 13 set the time[...]

15 Handling and operation SKRD 30 A1 GB IE Star ting the kitc hen timer After setting the time press the button Snooze/Timer ♦ 14 again. The displayed time begins to run backwar ds. In t he right, upper corner of the display a backwar ds running clock is superimposed. NOTICE If, during the operation of the kitchen timer , another function is sele[...]

16 Handling and operation SKRD 30 A1 GB IE Progr amming the kitc hen timer Y ou can prepr ogramme the kitchen timer with the most frequently used times so that it is not necessar y to continually r eenter them. Up to 10 times can be prepro- grammed. All 10 memory slots are preprogr ammed with 10 minutes as standard. For the pr ogramming of the kitc[...]

17 Handling and operation SKRD 30 A1 GB IE Progr amming alarm w ake times The device has tw o alarms available. All settings for both alarms can be carried out independently from each other . Y ou can select whether at the programmed time an alarm tone shall sound or the radio shall play . NOTICE If, during alarm wak e programming, no button is pre[...]

18 Handling and operation SKRD 30 A1 GB IE W ak en with r adio If you w ant to be woken b y the radio, before activ ating the wake time carry out the following settings: Switch the radio on b y pressing the On/Off ♦ 4 button. Select the station with which you w ant to be woken (see section ♦ Station setting ). With the V OL UME ♦ 14 knob set[...]

19 Handling and operation SKRD 30 A1 GB IE Radio operation NOTICE For a good r adio reception the wire antenna ► 15 must be completely un- coiled. Adjust the antenna, whilst in radio operation, to the best r eception. The technical factors of the device allo w for tuning reception frequencies ► outside of the permitted VHF (FM) range of 87.5–[...]

20 Handling and operation SKRD 30 A1 GB IE Saving st ations manually Prerequisit e: The de vice is in the radio operational mode. The device has 30 memory slots available for station frequencies. T o save a station frequency pr oceed as follows: T une, as described previously , the desired station. ♦ Press the button Lock/Mem. ♦ 6 once. The sym[...]

21 Handling and operation SKRD 30 A1 GB IE Additional functions Automatic switc h off (Sleep function) With the sleep function the radio switches itself off af ter a time lapse of betw een 5 and 120 minutes. T o access the function press the button AO T ♦ 5 . The current r emaining time until the radio switches itself off is shown. Press the b[...]

22 Cleaning/T roubleshooting SKRD 30 A1 GB IE Cleaning Safet y instructions DANGER Life-thr eatening situation from electric shock! R emo ve the plug fr om the mains pow er socket befor e cleaning. ► IMPORT ANT Damaging of the device! Mak e sur e when you are cleaning the device that no moistur e gets inside ► in order to av oid irreparable dam[...]

23 T roubleshooting SKRD 30 A1 GB IE Malfunction causes and remedies The following table will help with localizing and r emedying minor malfunctions: Defect Possible cause Solution The display is showing nothing. The plug is not inserted. Insert the plug into the mains pow er socket. Mains pow er socket is not supplying pow er . Check the circuit f[...]

24 St orage/Dis posal SKRD 30 A1 GB IE St orage/Disposal Stor age If you do not intend to use the de vice for an extended period of time, disconnect it from the mains po wer supply , remove the battery and store it at a clean, dr y location that is not subjected to direct sunlight. Disposal of t he de vice Do not dis pose of the device in y our nor[...]

25 Appendix SKRD 30 A1 GB IE Appendix Information reg arding the EG conformit y declaration This device complies r egarding conformance to the basic requirements and other r elevant regulations of the Eur opean directiv e for electromagnetic compatibility 2004/108/EC, the low v oltage directiv e 2006/95/EC as well as the Eco- design directiv e 2009[...]

26 Appendix SKRD 30 A1 GB IE W arr anty With this device y ou receive a 3 year w arrant y from the date of pur chase. The device has been manufactur ed with care and meticulously e xamined before delivery . Please retain y our receipt as pr oof of purchase. In the case of a w arranty claim, please get in touch, by telephone, with our service depar [...]