Sylvania SRC2113 manual

13-INCH COLOR TV/VCR SRC2113 O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark. ® ® ® If you need additional assistance f or set-up or operating after reading owner’ s manual, please call T OLL FREE : 1-8[...]

1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions- All opera[...]

- 3 - EN 01A1 1 13.Outdoor Antenna gr ounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to pro[...]

A V OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can rad[...]

- 5 - EN 01A1 1 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula- tions concerning chemical wa[...]

- 6 - EN 01A1 1 FEA TURES • Infrared remote control • Bilingual on screen menu displa y selectable in English or Spanish • Real time counter – This shows the elapsed record- ing or playback time in hours, minutes, and sec- onds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00?[...]

- 7 - EN 01A1 1 OPERA TING CONTROLS AND FUNCTIONS - TV/VCR FR ONT P ANEL - 1 EARPHONE jack – Connects to earphones (not sup- plied) for personal listening. The size of jack is 1/8” monaural (3.5mm). 2 A UDIO input jack – Connect to the audio output jack of your audio equipment, video camera or another VCR. 3 VIDEO input jack – Connect to th[...]

- 8 - EN 01A1 1 - REAR VIEW - 27 26 ANT . 7 F .FWD button – Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) B button – • When setting program (for example: setting clock or timer program), press to determine your selec- tion and proceed to the next step you want to input. •[...]

- 9 - EN 01A1 1 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied) is detach- able. Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR.Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT . terminal of the TV/VCR as shown in the diagram. [...]

- 10 - EN 01A1 1 INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow . 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover . SET UP FOR USE Y ou can program the tuner to sc[...]

- 11 - EN 01A1 1 CLOCK SET UP (AUTO / MANUAL) Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance. NOTES: • Auto clock setting only needs to be set on[...]

- 12 - EN 01A1 1 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “ CHANNEL SET UP ” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Begin auto preset Press the PLA Y[...]

- 13 - EN 01A1 1 1 Select “ CHANNEL SET UP ” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Select “ ADD/DELETE CH ” Press the PLA Y/ K or STOP/ L but- ton to point to “ADD/DELETE CH”. Press the F .FWD/ B button. 3 Enter the desire[...]

- 14 - EN 01A1 1 TV OPERA TION W A TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/V[...]

- 15 - EN 01A1 1 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, [...]

- 16 - EN 01A1 1 3 Select your desired item Press the PLA Y/ K or STOP/ L but- ton to point to your desired item. Then, press the F .FWD/ B button to select [BLOCK] or [VIEW]. • When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically . Also, the lower rating will turn [VIEW] automatically . • W[...]

The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching the PLA Y button. ALL REPEA T : Repeat playback from the beginning to the end of the tape. BLANK REPEA T : Repeat playback from the begin- ning to a blank part of more than 10 seconds. 1 Select “ USER ’ S SET UP ” Press the MENU button on the[...]

- 18 - EN 01A1 1 PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)Y ou may view a video tape at a high speed in either a forward or reverse direction by pressing the F .FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the[...]

- 19 - EN 01A1 1 • T racking adjustment will be set automatically (Digital T racking function) when you start play- back. • However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the play- back picture. If this occurs, you can adjust the tracking control manual[...]

- 20 - EN 01A1 1 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONL Y record and view the same channel. Y ou can ONL Y watch the same TV program that is being recor[...]

- 21 - EN 01A1 1 3 Begin O TR Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours. OTR(2 : 30) SP A void overlap of programs ... There is a chance tha[...]

- 22 - EN 01A1 1 the same time on the same channel every day . (Example: Monday thr ough Sunday) Press the STOP/ L (down) but- ton until “EVR Y DA Y” appears. Then, press the F .FWD/ B but- ton. For weekly recording : T o r ecord a TV program at the same time on the same channel every week. (Example: every Monday) Press the STOP/ L (down) butto[...]

- 23 - EN 01A1 1 TO CANCEL AN AUTOMA TIC TIMER RECORDING • After setting a program; 1)Press the POWER button. 2)Repeat steps [1] ~ [2] under TIMER RECORD- ING, page 21, and select a program you want to cancel. 3)Press the T -PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. • While recording is in pr ogress[...]

- 24 - EN 01A1 1 2 Select “ TV ” or “ T APE ” Press the PLA Y/ K or STOP/ L but- ton until it points to “TV/ T APE”. Press the F .FWD/ B or REW/ s button, and select [TV] or [T APE]. 3 Set wake up time Press the PLA Y/ K or STOP/ L but- ton until it points to “TIME”. Press the F .FWD/ B or REW/ s button until your desired wake up ti[...]

- 25 - EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING • [...]

- 26 - EN 01A1 1 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM CORRECTIVE ACTION No power . • Make sure the AC cord is connected to an AC[...]

- 27 - EN 01A1 1 SPECIFICA TIONS GENERAL SPECIFICA TIONS CR T : 13 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.119/FCC V ideo Heads : Rotary two-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec. T uner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV[...]

- 28 - ES 01A1 1 1 T oma de auriculares (EARPHONE)– Para conec- tar los auriculares (no suministrados) y escuchar en pri- vado. La toma es mono y tiene un tamaño de 3,5 mm. 2 T oma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de su equipo de audio, videocámara u otra videograbadora. 3 T oma de entrada de vídeo (VIDEO)[...]

- 29 - ES 01A1 1 27 26 ANT . 6 Botón de reproducción (PLA Y)– Púlselo para ini- ciar la reproducción. Botón K – • Púlselo para seleccionar los modos de ajuste desde el menúde la pantalla. • Púlselo para introducir dígitos cuando establezca un programa. (Por ejemplo: Para ajustar el reloj o establecer un pro- grama de temporizador) [...]

- 30 - ES 01A1 1 CONEXIONES DE ANTENA/CABLE ANT. IN OUT ANT. Antena de varilla UHF/VHF (incluído) Antena combinada de VHF/UHF (no incluído) Combinador de VHF/UHF (no incluído) Antena UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable Cable coaxial de 75 ohm (no incluído) Caja de CA TV o caja de emi- siones vía satélite (no[...]

- 31 - ES 01A1 1 PREP ARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar . NOT A: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación. 2) Pulse el botón POWER para encender el televisor/videograbador[...]

LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: P ARTS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. T wo (2) years for Picture T ube. Certai[...]