Ir a la página of
manuales de instrucciones parecidos
-
Network Card
Tandberg Data DLT4000
164 páginas 1.07 mb -
Network Card
Tandberg Data T40
95 páginas 1.96 mb -
Network Card
Tandberg Data Viking FS-1500
151 páginas 1.52 mb -
Network Card
Tandberg Data Viking FS-1600
151 páginas 1.52 mb -
Network Card
Tandberg Data StorageLibrary T40 T40
95 páginas 2.05 mb -
Network Card
Tandberg Data Viking FS-412
151 páginas 1.52 mb -
Network Card
Tandberg Data 600
126 páginas 2.43 mb -
Network Card
Tandberg Data NAS Hardware Viking FS-1500
151 páginas 1.59 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Tandberg Data 600. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Tandberg Data 600 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Tandberg Data 600 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Tandberg Data 600, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Tandberg Data 600 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Tandberg Data 600
- nombre de fabricante y año de fabricación del dispositivo Tandberg Data 600
- condiciones de uso, configuración y mantenimiento del dispositivo Tandberg Data 600
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Tandberg Data 600 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Tandberg Data 600 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Tandberg Data en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Tandberg Data 600, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Tandberg Data 600, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Tandberg Data 600. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
SDL T 600 Pr oduct Manual[...]
-
Página 2
SDL T 60 0 Pr od uc t Manu al ii Co pyri ght Copyri ght © 2004 by Quantum Corpo ration. All rig hts rese rved . Repri nte d with permis s ion by T andbe r g Data ASA. T rademarks T and ber g is a trade mark of T andbe rg Data ASA. Quant um, th e Quantum lo go, and t he DL Ttap e logo a re trade marks of Quant um Corporati on, regist e re d in the [...]
-
Página 3
SDL T 60 0 Pr od uc t Manu al iii Re visi on Hist o r y The tabl e bel ow list s all revis io ns made to this docum ent in chro nolo gical order . User Manual Statem ent s for Class A Equipment (Internal SDL T 6 00 T ape Drive System) This equ ipmen t genera tes, use s , an d may emit radio fre quen cy en ergy . The equipme nt has be en te s ted an[...]
-
Página 4
SDL T 60 0 Pr od uc t Manu al iv Attentio n! Ceci est un produ it de Class e A. Dans un envir onne m ent dom est ique , ce produ it risq ue de créer des inte rférenc es radioé lect riques , il appa rti e nd ra alors à l'u ti lis ate ur de prendre les mesu res spécifi que s approp rié es. User Manual Statem ent s for Class B Equipment ( T[...]
-
Página 5
SDL T 60 0 Pr od uc t Manu al v supp ression was used in the quali ficat ion test for th e device . This info rmation will vary from dev ice to devi ce and needs to be obt ained from the EMC (Electroma gne t ic Compat ibi lity) group or pro duct manag er . This Cla ss B digit al a ppar at us comp lie s with Ca nadi an ICES-003 . Cet ap pareil numé[...]
-
Página 6
SDL T 60 0 Pr od uc t Manu al vi[...]
-
Página 7
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 vii Ta b l e o f C o n t e n t s 1 Int r o du c tio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -1 Pur pos e a nd S co pe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Re fere nce d D ocu[...]
-
Página 8
T able of Cont en ts SDL T 60 0 Pr od uc t Ma nu al vi ii Mar c h 20 04 8 1-8 1 18 4- 02 REV A01 Sup er DL Tt ape II Da t a Car tri dge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Qu ant um Dia gnos ti cs T o ols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]
-
Página 9
SDL T 60 0 Pr od uc t Ma nu al T a bl e of Con t en t s 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 ix 4 Inst alli ng Y ou r T a pe Dr iv e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 W ar rant y No te . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4[...]
-
Página 10
T able of Cont en ts SDL T 60 0 Pr od uc t Ma nu al x Mar c h 20 04 81- 8 1 184- 02 REV A01 Wh en to Use the Cl eani ng T ape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Lif e Ex pe cta ncy of the C l eani ng T ape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]
-
Página 11
81 -81 1 84-0 2 R EV A0 1 M arch 20 04 xi List of T ab les 1 Int r o du c tio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -1 T abl e 1- 1. T ypographical Conventio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 3 SD L T 6 0 0 T ape Driv e Sp ecif ica t io n [...]
-
Página 12
Li st of T abl es SDL T 60 0 Pr od uc t Ma nu al xi i Mar c h 20 04 8 1-8 1 18 4- 0 2 REV A 01 4 Inst alli ng Y ou r T a pe Dr iv e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 T ab le 4 -1. SC SI I D A dd ress Sel ec tion s (G rap hic al F orm at ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -7 T ab le 4 -2. SC[...]
-
Página 13
81- 81 1 84-0 2 R EV A0 1 M arch 2004 x iii Li st of Fig ures 2 SD L T 6 0 0 T ap e Dr iv e Prod uc t Inf o rm a t io n . . . . . . . . . . . . . . . . 2-1 Figure 2-1. SDL T 600 T ape Drive Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Figure 2-2. SDL T 600 T ape Drive Modular Design . . . . . . [...]
-
Página 14
Li st of Fi gures SDL T 60 0 Pr od uc t Ma nu al xi v Mar c h 20 04 8 1-8 1 18 4- 0 2 REV A 01 A Su pe r D L Tt ap e I a n d Su p er D L Tt ape I I Da ta C a rt ri dg es . . . . . . A -1 Figure A-1. Super DL Ttape Data Cart r idges Read by SDL T 600 T ape Drive . . . . . . . . . . . . . . . . . A-2 Fig ure A- 2. Bott om V i ew of S upe r DL Tt ape [...]
-
Página 15
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 1-1 C HAPT ER 1 Int rod uc ti on This c hapte r provide s su pplementar y informati on a bout using the SDL T 600 t ape dri ve system Pr oduct Manual . The chapter di scusses t he followi ng topics: • “Purpo se and Scope” describ es the type of infor mation found in the manual , an d its inte nded use [...]
-
Página 16
Ref ere nced Do cum ents SDL T 60 0 Pr od uc t Ma nu al 1-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 1.2 Referen ced Do cuments • SDL T 600 Fibr e Channe l Inter fac e Guide (81-81 202- 01) • SDL T 600 SCSI Interfac e Guide (81-81200- 01) • SDL T 600 Design and Integr ation Guide (8 1-8 1 196-01) • Super DLT tape™ Inte ractiv e Library Inte [...]
-
Página 17
SDL T 60 0 Pr od uc t Ma nu al Chapte r 1: Introd uction 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 1-3 • Appendix B , “DL Tt ape VS1 Data Cart r idge, ” pr ovides i nformat ion for the DL Ttape™ VS data cart ridge inclu ding handling a nd inspe ction pr ocedur es, informati on on the write -pro te ct switch, and how t o l oad and unload a da[...]
-
Página 18
Re ad er C omm ent s SDL T 60 0 Pr od uc t Ma nu al 1-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 1.7 Reader C omments T andbe r g i s committed to providing the best produc ts a nd service . W e encourage your comments, sugges tions , and cor rection s for this m anual. Pleas e se nd all commen ts to this addr ess: T andbe r g Data A SA Kj e ls ås v [...]
-
Página 19
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-1 C HAPT ER 2 SDL T 600 T ape Drive Prod uct Inf ormatio n This chapte r descr ibe s the featu res of the SDL T 600 tape driv e syst em. This c hapt er covers the foll owing topi cs: • “Over view ” describes ba sic feat ures of the sys tem. • “Pro duct Featu res” lists key f eatur es of the SDL[...]
-
Página 20
Pr od uc t Fea t ures SDL T 60 0 Pr od uc t Ma nu al 2-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 Fi gure 2- 1. SDL T 600 T ape Drive S ystems 2.2 Product F eatures The SDL T 600 tape drive syste m of f er s the foll owing pr oduct fea tur es: • A st reamin g tap e dri ve that use s hal f-inch wide Supe r Digi t al L inear T ape (Super DL Ttape II) [...]
-
Página 21
SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-3 • The SDL T 600 tape drive is avail able in eithe r Ultra 160 or Fibre Channel inte r face versions . (Fibr e Channel not avai la ble with the table top model). For more infor mation on the SDL T 600 tape drive [...]
-
Página 22
T ape Driv e T e chno logy SDL T 60 0 Pr od uc t Ma nu al 2-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 2.3.3 M a g neto Resistiv e Cluster H e ad s Magneto Resi stiv e Cluste r (MRC) heads are a densely packed array of small, cost- ef f ect ive Magneto Resisti ve (MR) tape he ads p recise ly positi one d using a dvanc ed thin-f ilm pr ocessing techn o[...]
-
Página 23
SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-5 2.4 Modula r D e sign The SDL T 600 tape drive is designed as a total syste m. The system includ es a complex interact ion of a number of importa nt components including suc h items as the tape path, tape heads, m[...]
-
Página 24
Modu lar Desi gn SDL T 60 0 Pr od uc t Ma nu al 2-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 2.4.1 Data Control M odu le The Data Contro l Module (DCM) contain s sever al of the functio ns and feature s of the LGMR technolo gy , which is at the heart of the SDL T technolog y . Of the fi ve technologi es that consti tute the LGMR technol ogy , two are [...]
-
Página 25
SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-7 Base Plat e The SDL T 600 tape dr ive ba se pl at e is a n a luminum die ca stin g with precis ely mac hined sur f aces. The casting act s as the suppor t pla tfor m for the othe r modules and for the tape drive e[...]
-
Página 26
Modu lar Desi gn SDL T 60 0 Pr od uc t Ma nu al 2-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 2.4.4 Electr o nic Interface Module The Elect ronic Inte r face Module (EIM) is the electr oni c heart of the SDL T 60 0 tape drive syst em. It provi des the main contr ol fun ction for the syste m and the interface from the system to the host compute r , l ib[...]
-
Página 27
SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-9 2.5 Quant um Diagnost ics T ools Quantum, the manuf acture r of your drive, f r equent ly provide s new and updat ed tool s to use with its tape dri ves. These tool s inc l ude such ite ms as upgrades for produc t[...]
-
Página 28
Medi um Auxi li ary M emo ry SDL T 60 0 Pr od uc t Ma nu al 2-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 2.7 Medium Aux iliary Memory Medium Auxili ary Memory (MAM) is a feature in the SDL T 600 tape drive tha t produ ces vari ous attrib utes about the data cart ridge and re cord s t hem in a l og fi le on the media it self. Thes e a ttribut es prov[...]
-
Página 29
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-1 C HAPT ER 3 SDL T 600 T ape Drive Specif ication s This chapte r descr ibe s various specif ica tions tha t apply to the SDL T 600 tape drive syste m: • “Produ ct Specific a tions ” provide s tape drive spe cifi catio ns • “Func tional Speci ficatio ns” p rovide s functi ona l sp ecific ation[...]
-
Página 30
Pr od uc t Spec i fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 Ult ra 16 0 SC SI I nte rfa c e The Ultra 160 SCSI int e rface pr ovi des a l ow- voltage di ffe renti al (L VD) mode r unning u p to 160 MB/second and a single - ended (SE) mode runni ng up to 40 MB/second. N OTE : The host computer ’ s SCSI co[...]
-
Página 31
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-3 In SE mode, the SCSI bus can support up to 7 device s using c able lengths up to 3 m e ters. In L VD mode, the SCSI bus can sup port up to 15 de vices usi ng cable l engths up t o 2 5 meters. For m ore information about[...]
-
Página 32
Pr od uc t Spec i fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 3.1.3 Phys ic al Dimensi o ns an d W eights Ta b l e 3 - 3 provides phy sical di mensions f or t he SDL T 600 tape d r ive syst e m. Ta b l e 3 - 4 shows the weights of the S DL T 600 t a pe dr ive. 3.1.4 Compression The tape drive contain s on-bo[...]
-
Página 33
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-5 3.1.5 Stor age Capacity Ta b l e 3 - 5 provi des nati ve and compresse d capac ity r anges for the Super DL Ttape II data cartridge : In accord ance with industry prac tice , a typical compression rati o of 2:1 is quote[...]
-
Página 34
Pr od uc t Spec i fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 3.1.7 Maximum Data T rans fer Rate Ta b l e 3 - 7 shows the maximum sust ained ( and bur st) data transf er rates for the SDL T 600 tape d r ive. N OTE : Cable leng ths and cabl e type may l imit a ttaina ble tra nsfer rat e; for de tails , refer [...]
-
Página 35
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-7 3.1.9 Media Durabili ty Ta b l e 3 - 8 shows the number of media pa sses a nd f ull media u ses to expect fr om a Super DL Ttape II data car tridge . 3.1.10 Data Cartridge Life Expectancy Ta b l e 3 - 9 shows the number[...]
-
Página 36
Fun cti onal Speci fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 3.2 F unct ional S pecification s The following subsections c ontain f uncti ona l sp ecifica tions for t he SDL T 600 tape dri ve. 3.2.1 Pe rformance Data Ta b l e 3 - 1 0 p rovide s performa nce dat a for the SDL T 600 tape drive system. For a [...]
-
Página 37
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-9 3.2.2 Shock and Vibration Specifications The following table s pr ovide non- ope rati ng and operati ng shoc k and vibration spe c ific ati ons for the SDL T 600 tap e dr ive sy stem. T a ble 3-1 1 . Non-Operating Shoc [...]
-
Página 38
Fun cti onal Speci fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 T a ble 3-1 4. Non-Operating V i brati on Spe ci ficati ons (Package d) V i bration (Packaged) T ype Ra ndom Fre que ncy Range T ruck P ro file* (0.5 Gr ms) Air Profile * (1.0 Grms) Ap plica tio n X, Y , Z ax es ( 30 m inu tes, each pr ofil e a[...]
-
Página 39
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-1 1 3.2.3 Cu rrent and P ower Requirement s T abl e 3-16 on p age 3-12 lists th e current and powe r requi rement s for the two versio ns of the SDL T 600 tape dr ive syst e m (in ternal and tablet op) c onfigure d wi th [...]
-
Página 40
Fun cti onal Speci fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-1 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 T a ble 3-1 6. Current and Power Requirements (SCS I Inte rfa ce) Mode 5 V Curre nt (A) MaxPk 1 Max Mea n 2 Ty p 3 12 V Cu rren t (A) Ma xP k 1 Ma xM ean 2 Ty p 3 DC Power (W) Max 4 Ty p 5 AC Power (W) Max 6 Ty p 7 S tandby /Idl e 2.6 2.6 2.4 0[...]
-
Página 41
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -13 T a ble 3-1 7. Current and Power Requirements (Fibr e Channel Inte rfa ce) Mode 5 V Curre nt (A) MaxPk 1 Max Mea n 2 Ty p 3 12 V Cu rren t (A) Ma xP k 1 Ma xM ean 2 Ty p 3 DC Power (W) Max 4 Ty p 5 AC Power (W) Max 6 [...]
-
Página 42
Env ironm ent al S p ecif i cati on s SDL T 60 0 Pr od uc t Ma nu al 3-1 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 3.2.4 SDL T 600 T ape Drive System Recordi ng Method The SDL T 600 tape drive syste m uses the Part ial Response Maximum Likel ihood (PRML) 32/33 encoding metho d for read ing/writ ing S DL T 600 tape drive form at. It uses the same algo[...]
-
Página 43
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -15 3.3.2 T emperature and Humidity The ambient ope rati ng environm ent for the tape dri ve may not excee d the limits shown in Ta b l e 3 - 1 8 . (The s pe cifica tions shown in the ta ble ar e va lid f or bot h the int[...]
-
Página 44
Re cord ing Me di a Spec i fic at ions SDL T 60 0 Pr od uc t Ma nu al 3-1 6 Mar c h 20 04 81- 8 1 184- 02 REV A01 3.3.4 Altitude Both the inte rnal and table top tape drive s opera te in normal pressur es from –500 to 10,000 fee t when opera ted wit hin the amb ient o pe rating environm ents s pe cified in Secti on 3.3 .2, “T em perature and Hu[...]
-
Página 45
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -17 Fi gure 3- 1. Mu ltiple L aye rs Co mprise Super DL Ttap e II M edia 3.4.2 Physical Data Cartridg e A durable plast ic c as e encloses the Super DL Ttape II media, as shown in Figure 3- 2 . Fi gure 3- 2. Supe r DL Tt [...]
-
Página 46
Re cord ing Me di a Spec i fic at ions SDL T 60 0 Pr od uc t Ma nu al 3-1 8 Mar c h 20 04 81- 8 1 184- 02 REV A01 3.4.3 Media Shipping, Operating, an d Storage Spec ificati ons Ta b l e 3 - 2 1 descr ibes the opt im um media shi pping c ondit ions. Ta b l e 3 - 2 2 descr ibes the opt im um media operat ion conditi ons. Ta b l e 3 - 2 3 descr ibes t[...]
-
Página 47
SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -19 3.4.4 Backward-Read Compatibility T ransfer Rates The SDL T 600 tape drive syste m featur e s a backward- rea d compatibil ity (BRC) mode. When in BRC mode, the SDL T 600 tape drive is capabl e of rea ding SDL T 220 a[...]
-
Página 48
Re cord ing Me di a Spec i fic at ions SDL T 60 0 Pr od uc t Ma nu al 3-2 0 Mar c h 20 04 81- 8 1 184- 02 REV A01[...]
-
Página 49
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-1 C HAPT ER 4 Inst alling Y our T ape D rive This chapte r descr ibe s how to install the SDL T 600 tape drive. This inc lud e s conf igura tion jum per sett ings, connec tor pin ass ignment s, installation inst ructions, power and sig nal cabling desc ription s, and operati ng i nstr uc tions . This chapt[...]
-
Página 50
Safet y , Ha ndling , and ES D Pro tection SDL T 60 0 Pr od uc t Ma nu al 4-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 Generall y , the Li mited Prod uct and Limite d Repair W arranti es are continge nt upon pr oper use in the appli cati on for whic h the product is inte nde d; and do not cover the product if you perform any of the foll owing acti ons[...]
-
Página 51
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-3 4.2.2 Handli ng Damage t o the SDL T 600 tape driv e syst e m can oc cur as t he r esult of c areless handling, vibra tion, shock, or ele ctros ta tic disc har ge (ES D). For more details a bout ESD, refer to “El ectrost atic[...]
-
Página 52
Pr e-I n sta llati on Gu id eli nes SDL T 60 0 Pr od uc t Ma nu al 4-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 T o minimiz e the possibi lity of ESD-r el ated damage to the system, the drive’ s manufact urer str ongly recommends using both a worksta tion a nti-stati c mat and an ES D wri st s trap. Whe n correctl y installe d and properly used, t h[...]
-
Página 53
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-5 The Model Number is a c har acter st r ing usually beginnin g with t he lett e rs “TR.” Mo d e l N u mb e r: T R The S erial Nu mber i s a ch aracter stri ng beg inning with the letter s “R B.” Seri al Nu mber: RB 3. Ch[...]
-
Página 54
Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 4.4.1 Settin g the Inte rnal T ape Drive SC S I ID Each de vice on th e SCSI bus must ha ve a u nique SCSI I D addre ss assigned to it. F or sp e cific recommenda tion s for a ss igning SCSI I Ds, r efe[...]
-
Página 55
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-7 N OTE : T he co mputer system an d the t ape drive SCSI IDs a re onl y ch ecked at power - o n. T o change the SCSI ID after installa tion , powe r of f both the system an d th e tape d riv e, ch ange th e t ape drive ’ s SCS[...]
-
Página 56
Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 T a ble 4-2 . SCSI ID Ad dr es s S e le cti o ns (T abu la r Form at) SCSI ID Jumper Acr o s s Pins 9- 10* 7-8 5-6 3-4 1-2 010000 110001 210010 310011 410100 5 ( d e f a u l t ) 00000 610110 710111 8110[...]
-
Página 57
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-9 4.4.2 Configuring the Internal T a pe Drive for TER MP WR Y ou m ust te r minate a SCSI bus at each end of the bus. T er minate al l signa ls not de fined as RESER VED, GROUND, or TER MPWR exactl y once at eac h e nd of th e bu[...]
-
Página 58
Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 Figure 4- 4 shows two pers pecti ve vie ws of the inte rna l tape dr ive . Fi gure 4- 4. SDL T 600 T ape Drive—Fr ont and R ear V iews Securing the Inte rnal T ape Drive This s e ction de scr ibes h[...]
-
Página 59
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-1 1 Fi gure 4- 5. Intern al T ape Drive Mount ing Locati ons – Front, Side, a nd Botto m Di mension s Connec ting the Internal T ape Drive Cables This s e ction di scusses t hree conne ctor s on t he back of the i nternal SDL T[...]
-
Página 60
Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 SCSI and Power Connectors Figure 4-6 on page 4-13 shows t he pin orie ntati on for the 68-pin SCSI connect or a nd 4-pin p ower connec tor l oc ated on the back of the in ternal tape drive . The table[...]
-
Página 61
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -13 Fi gure 4- 6. Connectors on the Back Panel of SDL T 60 0 T ape Driv e T a ble 4-3 . M SE and SE Mode S CSI Conne ctor Pin Assignme nts Signal Name Pin N umb er Pin Nu mbe r Si gn al N am e Ground 1 35 -DB( 12) Ground 2 36 -DB[...]
-
Página 62
Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 Ground 10 44 -DB( 4) Ground 1 1 45 -DB( 5) Ground 12 46 -DB( 6) Ground 13 47 -DB( 7) Ground 14 48 -DB( P0) Ground 15 49 Ground D I F F S E N S 1 65 0G r o u n d T E R M P W R 1 75 1T E R M P W R T E R[...]
-
Página 63
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -15 T a ble 4-4 . M SE L VD Mode SCSI Conne ctor Pin Assign ments Signal Name Pin N umb er Pi n Nu mbe r Si gn al N am e +DB(12) 1 35 -DB( 12) +DB(13) 2 36 -DB( 13) +DB(14) 3 37 -DB( 14) +DB(15) 4 38 -DB( 15) +DB( P1) 5 39 -DB( P[...]
-
Página 64
Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 6 Mar c h 20 04 81- 8 1 184- 02 REV A01 +C/D 28 62 -C /D +REQ 29 63 -REQ +I/O 30 64 -I/O +DB(8) 31 65 -DB( 8) +DB(9) 32 66 -DB( 9) +DB(10) 33 67 -DB( 10) + D B ( 1 1 ) 3 46 8- D B ( 1 1 ) T a ble 4-5 . 4-Pin Power Connector Pin Assignments [...]
-
Página 65
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -17 4.5 Conf iguring a n d Installing an I nternal T ape Drive with Fibre Channel Interface This s e ction pr ovi des in formati on for co nfigur ing and in stallin g a t a pe dr ive wit h t he F ibre Ch annel inter face in to a [...]
-
Página 66
Co nf ig uring and Inst al li ng an I nt erna l T ape D riv e with Fib re C h ann el Int erfac e SD L T 600 Pro du ct Man ua l 4-1 8 Mar c h 20 04 81- 8 1 184- 02 REV A01 Fi gure 4- 7. SDL T 600 Fibre Channel Connector s a nd Jumpers Follo w these steps to connec t a Fibr e Channel tape drive: • Secure th e tape drive . • Connect th e powe r . [...]
-
Página 67
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -19 Because of the variety of mountin g possibil ities f or tape d rives, the instruc tions prese nted he re a re gener al in nature . Use them only as a guide for mounting the ta pe drive in your syst em. Mount the tape dri ve i[...]
-
Página 68
Co nf ig uring and Inst al li ng a T a bl et op T ape D r iv e SD L T 600 Pro du ct Man ua l 4-2 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 4.5.5 Conn ec t the Fi bre Channel Ca ble 1. Fibre Chan nel c ables a re “hot-swa ppable ”—meaning y ou may connect and disconnect t hem wi th unit power on. The r efore , unlik e other syste ms, the tape dr[...]
-
Página 69
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -21 4.6.1 Configuring the T ape Drive Figure 4-9 on page 4-21 shows t he location of the c ontrols and connector s for the tabletop tape drive . This model of tape drive is normally c onf igure d to meet customer specif ica tion [...]
-
Página 70
Co nf ig uring and Inst al li ng a T a bl et op T ape D r iv e SD L T 600 Pro du ct Man ua l 4-2 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 Fi gure 4- 10 . SCSI ID Selector Switch for the SDL T 600 T a pe Dri ve T abletop Mod el TE RMP WR The factor y preconfigur es t he TER MPWR sett ing for the t abletop t a pe dr ive a ccordi ng t o sp ecific cust [...]
-
Página 71
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -23 bus cable betwe e n the ope n c onnect or and t he next devic e o n the bus. Figur e 4-1 1 ill ustra tes the se two connec tion method s. Figure 4-1 1. Cabling Op tions for t he SDL T 600 T ape Drive T abletop Model 1. Prior [...]
-
Página 72
Co nf ig uring and Inst al li ng a T a bl et op T ape D r iv e SD L T 600 Pro du ct Man ua l 4-2 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 AC Power Cable An AC power cord is supplied with eac h tablet op unit. Carefully ins pe ct the power cord and ensure that the cord is the appropria te cord for your countr y or region based on the crite r ia below[...]
-
Página 73
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -25 The tabl e to p unit power s upply h a s an aut o-s ensing f e ature; it requires no a djus tment or switch se tt ing chang es for differe nt AC sour ces. Refer t o Figure 4- 9 and Figur e 4-12 . Connect one end of the AC cor[...]
-
Página 74
Con firmi ng the Instal latio n SDL T 60 0 Pr od uc t Ma nu al 4-2 6 Mar c h 20 04 81- 8 1 184- 02 REV A01[...]
-
Página 75
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-1 C HAPT ER 5 Using Y o ur T ape Drive This c hapte r desc ribe s h ow to st a rt usin g your SDL T 600 tape driv e syst e m. This include s making a tri al back- up, cl eaning the tape mechanis m, and variou s troublesho oting i nforma tion. This chapter also incl udes inform at ion on the LEDs and button[...]
-
Página 76
Power-On S e lf-T e s t SDL T 60 0 Pr od uc t Ma nu al 5-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 During this time, if a host tri es to negotiate Synchr onous or W id e tra nsfers, the SDL T 600 tape dri ve syste m negotiate s to Async hronous or Narrow . It may take longer than the durat ion of POST for the tape dri ve to become ready . Ta b l e 5 [...]
-
Página 77
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-3 5.2 P erfo rmin g a T rial Back-up Complet e the following ste ps to pe rform a trial ba ck up and verify correc t tape drive insta llati on: • Inser t a data cartrid ge. Push the dat a cartr idg e co mplete ly int o th e syst em.[...]
-
Página 78
Upda ting th e Firm wa re SDLT 600 Prod uct Ma nu al 5-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 5.3.1 Upd ate the Fir m ware Usi ng the SC SI Bus Quantum p r ovides up gr ades for product s oftware and fir mware that may be ne wly deve loped. These upd at es a re ava il ab l e on Quan tum’ s we b sit e . N OTE : T hese t ools are on ly a v ailable[...]
-
Página 79
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-5 5.3.3 Using a CUP/FUP Data Cartri dge Foll ow t hese st eps to use a CUP /FUP dat a car t ridge: 1. V erify tha t the tape drive is t urn ed on (power is a ppl ied), and the middle (Drive S ta tus) LED on the front pa nel of the tap[...]
-
Página 80
Cl ea ni ng the T ape Mecha nism SDL T 60 0 Pr od uc t Ma nu al 5-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 N OTE : If the tape drive is mount ed in a tape aut omation li br a r y , the CUP/FUP data c artridge re winds to B OT and un buckles i n prepa rati on for unloa ding, but does not automaticall y eje ct. 5.3.4 Firmware (Code) Update T roublesho[...]
-
Página 81
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-7 5.4.1 Occasional Cleaning of T ape Head SDL T 600 tap e dr ives o ccasiona lly r equir e pre ventive cle aning. The amount of amb ient p o llution a nd partic ulate s in the environme nt, to a lar ge degr ee, dictate s the clea ning[...]
-
Página 82
Cl ea ni ng the T ape Mecha nism SDL T 60 0 Pr od uc t Ma nu al 5-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 5.4.5 Loading the C leaning T ape In to a T abletop T ape D rive N OTE : T o use th e cl eaning tape in an Autol oader or L i brary tape drive, refer to your owner’ s m a nua l. Follo w these steps to loa d an SDL T CleaningT ape into an SDL [...]
-
Página 83
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-9 5.5 F ront P anel Control s a nd LEDs All cont rols a nd LEDs are on the ta pe drive’ s front panel. See Figure 5- 2 for de tails. Use th ese c o ntro ls and LE Ds to ope rate t he tape dr ive a nd m onito r the S DL T 600 tape dr[...]
-
Página 84
Fro nt P ane l Cont rol s an d LE Ds SDL T 60 0 Pr od uc t Ma nu al 5-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 T a ble 5-2 . Dua l -Color Dri ve Density LED Appearance fo r T ype of Data Cartridg e Loaded Poss i bl e D a ta C a rtri d g e Sce nari o LED Color /S tate No data cart ridg e is inser ted Off SDL T 600 tape dri ve format ted Su per DL T[...]
-
Página 85
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-1 1 Ta b l e 5 - 3 explain s t he func tion of the other LEDs and contr ols in the front panel . T a ble 5-3 . How to Inter pret the Front Panel LEDs and Othe r Contr ol s LED /Butt o n/ Por t Title Color/Symbol Act ion Explanat ion D[...]
-
Página 86
T r oubl esho otin g SDL T 60 0 Pr od uc t Ma nu al 5-1 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 5.6 T roubleshooti ng The following sub secti ons pr o vide trou ble shooti ng inf ormation tha t mig ht be helpful should the syste m fail its Power - On Self- T est (POST). Refer to the data cartridg e appendic es in thi s manual ( Appendix A, “Super[...]
-
Página 87
SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5 -13 System doe s not recogniz e the SDL T 600 tape dri v e system. (cont inued) Interfa ce b us may not b e terminated c orrectly . If the SDL T 600 tape dri ve s ys te m is la st or only d e vice o n bus (e xcept for adapt er) , be c[...]
-
Página 88
T r oubl esho otin g SDL T 60 0 Pr od uc t Ma nu al 5-1 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 5.6.2 Over T em p erature Condition The SDL T 600 tape drive has a thermal sensor locat ed in the tap e path. This senso r , which is used to accura tely moni tor the air tempera tur e in the tape path, issues a T apeAl ert warni ng at 47 °C, and detec [...]
-
Página 89
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 6-1 C HAPT ER 6 Regulatory Co mpliance This c hapte r desc ribe s v arious r egula tions t ha t apply to the SDL T 600 tape drive : • “Safet y Regu l ati o ns” desc ribes complia nce with vari ous sta ndard s publish e d by inter nationa l safe ty o rganiz ations . • “Elect ro m ag net i c Fiel d S[...]
-
Página 90
Ele ctrom agn et ic Fi eld S peci ficat io ns SDL T 60 0 Pr od uc t Ma nu al 6-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 6.2 Elect r omagnetic Field Specifications SDL T 600 tape drive s are elect rical de vic es; as such, thi s equipment gen era tes, uses, and may emit radio f requenc y ener gy . The tape drive s may emit ener gy in other frequencie[...]
-
Página 91
SDL T 60 0 Pr od uc t Ma nu al Chap t er 6: Re gu la tory C om pl ia nce 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 6-3 6.2.3 Immunity and ES D Limits Ta b l e 6 - 2 lis ts the immunity and ESD failure level limits to which the SDL T 600 tape drive has been tested. T a ble 6-2 . E lec t ro magne tic Int erferen ce ( EMI) T es t Su mmary Te s t N a m [...]
-
Página 92
Ac oust ic No ise E miss ions SDL T 60 0 Pr od uc t Ma nu al 6-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 6.3 Acoust ic Noise E missions Ta b l e 6 - 3 lists a coustic noise emissio n levels, both as noise power and sound pressur e, for the SDL T 600 tape dri ve. The table provi des the prel imi nary decl are d values per ISO 9296 and ISO 7779/ EN2777[...]
-
Página 93
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-1 A PPEND IX A Supe r DL Tta pe I an d Supe r D L Tt a pe II Da ta Cart r idge s This appendix di scus ses Super DL Ttape I and Super DL Ttape II data cartr idg e infor matio n. Infor mation in thi s appendi x in cludes th e followi ng topics: • Recogni zing Quantu m Super DL Ttape I and II Data Cartridg[...]
-
Página 94
Da t a C a rtr i dg e Handl ing Gu id el in es SDL T 60 0 Pr od uc t Ma nu al A-2 March 2004 81-81 18 4- 02 REV A01 The SDL T 60 0 t ape drive is back w a rd read co mpatibl e with Super DL Ttape I dat a cartrid ges formatt ed in the SDL T 220 or SDL T 320 tape drive. Figur e A-1 s hows outside chara cterist ic di ff erenc es of the Super DL Ttape [...]
-
Página 95
SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-3 • When placin g data cartr idge s in archiva l stor age, be certa in you stand eac h data car tr idge vertic ally . • Do not carry data car tridge s loose ly in a box or any other contai ner . All[...]
-
Página 96
Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al A-4 March 2004 81-81 18 4- 02 REV A01 A .3 Data C artrid ge Inspect ion Pr ocedure Ensure your data cartr idge backup solut ion pe rforms relia bly by following the V isua l Mechanic a l Inspec tion (VMI) pr oced ures descri bed in thi s s ubsect ion. The se s teps wi ll[...]
-
Página 97
SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-5 5. Refer t o Figur e A-3 a nd check the r eel l oc k openings to ensur e t he small plastic t a bs ins ide a re partia ll y v isibl e. The reel locks are bl ack. The reel locks can break if you dro p [...]
-
Página 98
Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al A-6 March 2004 81-81 18 4- 02 REV A01 7. Open th e data c artri dge door by pressing on the ta b i n the door pi vot not ch as shown in Figu re A-4 . Use care that you do not touc h the tape leade r . 8. Compare what you see inside the data car tr idge door to Figure A- [...]
-
Página 99
SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-7 A .4 Data Cart ridge Wr ite-protect Switch Each d at a cartri d ge ha s a writ e-p rot ec t sw itch tha t you can us e to pr even t accid ent al erasu re o f data . Before in serting the data c artr i[...]
-
Página 100
Da t a C a rt ri dge Wri te- pr o tect S wit ch SDL T 60 0 Prod uc t Ma nu al A-8 March 2004 81-81 18 4- 02 REV A01 T a ble A - 1. W r ite-Pr otect Switch P osition s Writ e-prot ect Switch Po sition Orange Wri te-pr otec t Indicato r Re sult Befor e Loading the Data Cartridge Ena bled (S li d e sw i tc h to le f t) V isi ble Y ou cannot write da t[...]
-
Página 101
SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-9 A .5 Loa ding a Dat a C artr idge Complet e this sub se cti on to load a data c artrid ge i nto th e fr ont of th e tape dr ive; r e fer to F igure A-7 as neede d. 1. Inser t the data ca rtridge i nto[...]
-
Página 102
Un lo ad in g a Dat a Car t ri dge SDL T 60 0 Pr od uc t Ma nu al A- 10 Mar ch 2 00 4 81 -81 184 -02 REV A 0 1 A .6 Unl oading a D ata Cartri dge Foll ow th ese step s to unlo ad a d ata ca rtrid g e; ref er to Figur e A-7 on page A-9 as needed . 1. Press the Eject button ( or iss ue an appropria te syste m software command) ; the tape drive comple[...]
-
Página 103
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-1 A PPEND IX B DL Ttap e V S1 Dat a Ca rtr idge The SDL T 600 t ap e dr ive is ba ckward r e ad c ompati ble with DL Tt ape VS1 data cartr idg e s forma tted i n the DL T VS 160 tape d ri ve. Data backed up u sing a DL Ttape VS1 da ta cartr idge in a DL T VS160 t a pe drive is retr ieva ble using the SDL T[...]
-
Página 104
Da t a C a rtr i dg e Handl ing Gu id el in es SDL T 60 0 Pr od uc t Ma nu al B-2 March 2004 81-81 18 4- 02 REV A01 • When placin g data cartr idge s in archiva l stor age, be certa in you stand eac h data car tr idge vertic ally . • Do not carry dat a cartrid ges loosel y in a box or any other contain er . Allowi ng da ta cartr idges to hit to[...]
-
Página 105
SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-3 B.2 Data C artrid ge Inspect ion Pr ocedure Ensure your data cartr idge backup solut ion pe rforms relia bly by following the V isua l Mechanic a l Inspec tion (VMI) pr oced ures de scri bed in thi s s ubsection. These s teps h[...]
-
Página 106
Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al B-4 March 2004 81-81 18 4- 02 REV A01 5. Refer t o Figur e B-2 and chec k the reel loc k openings to ens ur e the small plasti c tabs insid e are partia ll y v isibl e. The reel locks are bl ack. The reel locks can break if you dro p the data car tridge. If the r eel loc[...]
-
Página 107
SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-5 7. Once a gain, lo ok at the e nd of t he da ta c artri dge, holdin g it a s shown in Fi gure B-4 . Figure B-4. Opening the DL Ttape VS 1 Data Cartridge Door 8. On the rig ht side cor ner of t he da ta c artri dge is a s m all [...]
-
Página 108
Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al B-6 March 2004 81-81 18 4- 02 REV A01 Compare what you s e e in side the data c art ri dge door to illustrat ions in Figure B-6 . L ook for fa ulty items inc ludin g: A br oken tape lea der lo op A swallowed tap e leader loop Loose media insid e the data car [...]
-
Página 109
SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-7 B.3 Data C artridge Write-Prot ect S witch Each d at a cartri d ge ha s a writ e-p rot ec t sw itch tha t you can us e to pr even t accid ent al erasu re o f data . Before in serting the data c artr idge i nto the t ape drive, [...]
-
Página 110
Load in g a Data C ar tr idg e SDL T 60 0 Pr od uc t Ma nu al B-8 March 2004 81-81 18 4- 02 REV A01 B.4 Loa ding a Data C artr idge Complet e this subse c tion to loa d a data c artr id ge i nto the f ro nt of the ta pe drive; r e fer to F igure B-8 as neede d. T o lo ad a da ta c artr idge, follow these st eps: 1. Inser t the data ca rtridge i nto[...]
-
Página 111
SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-9 B.5 U nloading a D ata Cart ridge Complet e this subsection t o unload a dat a c artridge; refer to Figur e B-8 on page B - 8 as n e eded . 1. Press the Eject button ( or iss ue an appropria te syste m software command) ; the t[...]
-
Página 112
Un lo ad in g a Dat a Car t ri dge SDL T 60 0 Pr od uc t Ma nu al B- 10 Mar ch 2 00 4 81 -81 184 -02 REV A 0 1[...]
-
Página 113
81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 1 Glossary The fo llo wi n g is an alpha b et ical list of spec ialize d words an d techn ical te rms w i th the ir defin i tion s, commonly used in the tape drive and tape media industr y . A AC Alternating Current. Access ( v .) T o read, write, or update inf or mation on a storage medium, such as magne[...]
-
Página 114
B SDL T 60 0 Pr od uc t Ma nu al G- 2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 B Backup A copy of a file, directory , or volume on a separate storage device from the origina l, f or t he purpos e of re trie val in case the original is accidentally erased, damaged, or destroyed. Bad Data Block A block that cannot r eliably hold data because of a media [...]
-
Página 115
SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 3 C D Cache Specialize d RAM used as a buffer between a fa st CPU or I/O channel and storage which has a relative ly slo w access time (for example, tape or diskette), to avoid slowing down t he former . Cartridge Recei ver At media inse rtion, the cartridge receiver assembl[...]
-
Página 116
E SDL T 60 0 Pr od uc t Ma nu al G- 4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 E Device Acc ording t o the SCSI specification, multi ple SCSI devices can be connected to a single SCSI bus. Each SCSI device contains a SCSI ID number that can be set i n the range 0 to 15. Device Dr iver A low-level (usually ke rnel-mode) operating system component that [...]
-
Página 117
SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G-5 F G H Error A me ssage tha t occurs when th e re is a l os s of ability to interpret recorded da t a. Usually due to magnetic is s ues or de f ects in or on the media. ESD Electrostatic discharge. A sudden dischar ge of electrostatic energy that can damage delicate elect r [...]
-
Página 118
I SDL T 60 0 Pr od uc t Ma nu al G- 6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 I J HIM Host Interface Module. T his board is one of two boar ds that make up the EIM. The HIM implements the interface bet ween the host system a nd the tape drive; it comes in two diff ere nt variations, SCSI and Fibr e Channel. HRE Har d Read Err o r . HWE Hard W rite E [...]
-
Página 119
SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 7 K L M KB Kilobyte. A unit of measure equal to 1 t housand (1024) bytes. LED Light E mitting Diode. LGMR Laser Guided Magnetic Recording technology . LSB Least Signi fican t Bit. LUN Logical Unit Number . L VD Low V oltage Differential. L VD is a physical interface with pow[...]
-
Página 120
N SDL T 60 0 Pr od uc t Ma nu al G- 8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 N P Native Capacity The c apacity of a given media product in its basic recording format (w i thout the use of data compression). Native Mode R efers to the uncompressed stora ge capacity of a media subsystem. (See Native Capacity .) Node In reference to a F ibre Channel ne[...]
-
Página 121
SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 9 Q R S QEZ An Application Specif ic Integrated C ircuit (A S IC) for the SD L T 600 tape drive. qT alk One of the ut ilities compris ing Quantum’ s DL T Sage, qT alk lets users com municate wit h other computers via a serial line th at’ s usually connec t ed to a modem.[...]
-
Página 122
T SDL T 60 0 Pr od uc t Ma nu al G- 10 Mar c h 20 04 81- 8 1 184- 02 REV A01 T Shelf Life The length of time that media ca n be stored w i thout losing its magnetic strength. For Super DL Ttape II media, this period is 30 years or more. SRAM Static RAM. A memory chip that requires power to hold i ts content. T ake- up Reel T he reel inside every ta[...]
-
Página 123
SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G -1 1 U X UL Underwriters Laboratory; a United States safety or ga nization. Ultra 160 An SDL T 600 tape drive SCSI interface that pr ovides a low- voltage differential (L V D) mode running up to 160 MB/sec and a single-ended (SE) mode r unning up to 40 M B/sec. Unformatted Ca[...]
-
Página 124
X SDL T 60 0 Pr od uc t Ma nu al G- 12 Mar c h 20 04 81- 8 1 184- 02 REV A01[...]
-
Página 125
[...]
-
Página 126
March 200 4 Quantu m Publica tion Numb er: 81-81 184-02 A01 T a nd be r g Publicati on Number: 432821-0 1 *81- 81 184-0 2 A01* 81-81184-02 RE V A01[...]