American Dynamics Matrix Keyboard manuel d'utilisation

8000-2675-02 Rev. D Matrix Keyboard ADTTE Operator’s Manual[...]

[...]

ADTTE Matrix Keyboard Operator’s Manual[...]

PN 8000-2675-02 Rev. D (BSL 0 7 /2004) Thank you for using American Dynamics products. We support our products through an extensive and worldwide network of dealers. The dealer, through whom you originally purchased this product, is your point of contact if you have a need for service or support. Our dealers are fully empowered to provide the very [...]

T ABLE OF CONTENTS PREFACE: BEFORE YOU BEGIN ............................................................................ V Using This Manual.................................................................................................... v Text Conv entions ........................................................................................[...]

iv A DTTE Matrix Keyboa rd Operator's Manual NOTES:[...]

PREF A CE Before Y ou Begin The Operator's Manual explains the featur es, operation, and application of the ADTTE Touch Tracker matrix keyboard (ADTTE matrix ke yboard). It explains the tasks that can be performed when using this product as part of your system. Using This Manual This manual is organized as follows: • Chapter 1: ADTTE Matrix [...]

vi A DTTE Matrix Keyboard Operator's Manual Related Documents Installation of the ADTTE matrix keyboard is covered in the Installation Instructions (part number 8000-2675-01). If you cannot find the answers in this document about performing a specific task with your keyboard, refer to the system operating instru ctions. The operating instructi[...]

CHAPTER 1 ADTTE Matrix Keyboard Overview The ADTTE matrix keyboard (Touch Tracker) is a video control station that provides the same functions as the AD2079 System Keyboard. It is compatible with all current models of American Dynamics switches. It allows you to operate cameras installed around your facility. You may also control auxiliaries, such [...]

1-2 A DTTE Matrix Keyboard Operator's Manual Keypad Overview 1. Site field shows the status of the connected switching system. See the appropriate operating instructions for additional information. 2. Monitor field shows the number of the monitor controlled by the keyboard. 3. Camera field shows the number of the camera controlled by the keybo[...]

A DTTE Matrix Keyboard Ov erview 1-3 9. Auxiliary On (PG-Left) / Auxiliary Off (PG-Right) buttons activate and deactivate features such as lights, locks, or alarms that can be controlled by the keyboard. See Chapter 3 for additional information. These buttons also serve as the Page Left and Page Right functions during menu programming. 10. Pswd but[...]

1-4 A DTTE Matrix Keyboard Operator's Manual 24. Site button controls satellite systems. Refer to the system operating instructions for additional information. 25. Run ( ↑ ) / Hold ( ↓ ) buttons are used with predefined monitor tours, universal tours, or alarm tours. Run starts a tour. Hold halts the tour. In addition, these buttons serve [...]

CHAPTER 2 Getting Started This chapter provides an overview of the fi elds displayed on the LCD. It explains how to determine if the keyboard lock is en abled, as well as providing instructions for locking or unlocking the keyboard. It also explains how to set or change the user-defined password. LCD Display Overview The keyboard display is a 2-lin[...]

2-2 A DTTE Matrix Keyboa rd Operator's Manual Understanding the Keyboard Lock Feature The keyboard lock feature prevents una uthorized use of the matrix keyboard advanced features. When “L” appears in the lower right corner of the LCD, operators cannot access certain system features. The features that cannot be accessed are Program Shot , [...]

Getting Started 2-3 Working with Passwords Passwords allow you to limit access to advanced features of the ADTTE matrix keyboard, such as arming/disarming monitors and the dual function menu programming keys. Passwords may be 1 to 4 digits in length and m a y be any number between 0-9998 . The default password is factory set to 1953 . To limit acce[...]

2-4 A DTTE Matrix Keyboa rd Operator's Manual NOTES:[...]

CHAPTER 3 Everyday T asks This chapter describes everyday tasks th at users can perform with the matrix keyboard. It explains how to control the zoom , focus, and iris settings for the selected camera. It explains how to program and recall Shots and Patterns to simplify surveillance activities. It also explains procedures for acknowledging alarms a[...]

3-2 A DTTE Matrix Keyboa rd Operator's Manual Controlling Cameras Each camera installed at your facility has a unique identification number. To control a camera, you must first select the camera with the matrix keyboard. Then you can control the zoom, focus, iris, pan and tilt of the selected camera. Figure 3-1 identifies the location of the p[...]

Every day Tasks 3-3 Figure 3-2: Tracker Ball pan/tilt movement. Moving the Tracker Ball to the right pans the camera to the right. Moving the Tracker Ball to the left pans the camera to the left. Moving the Tracker Ball up or down tilts the camera to the appropriate angle. Simultaneous pan and tilt camera movement can be achieved by moving the Trac[...]

3-4 A DTTE Matrix Keyboa rd Operator's Manual Controlling Zoom and Focus Once you have selected a camera, you can control its zoom and focus settings. Figure 3-4 illustrates the location and functi on of the zoom and focus buttons: Figure 3-4: Zoom and Focus Controls Adjusting Zoom Settings Zoom refer to the adjustment of the magnifi cation of[...]

Every day Tasks 3-5 Note: Some domes support the resume Auto Iris /Auto Focus command. Press the Iris Open and Iris Close buttons simultaneously to issue the command. The command is available only on domes that support this function. Stepping Through the Cameras Most systems allow you to manually step through the camera entries programmed into the [...]

3-6 A DTTE Matrix Keyboa rd Operator's Manual Working with Shots A shot is a programmed video scene, based on a specific pan, tilt, zoom and focus setting that can be recalled automatica lly. Shots are also referred to as presets or targets . Depending upon your system, you can have multiple pre-defined shots. Refer to the system operating ins[...]

Every day Tasks 3-7 To display a preset shot: 1. Enter the camera number and press (Camera button) . 2. Enter the shot number and press Shot . The camera immediately points to the preset shot, and adjusts zoom and focus automatically. Working with Patterns ! IMPORTANT The procedures discussed in this section are supported by the AD168 Matrix Switch[...]

3-8 A DTTE Matrix Keyboa rd Operator's Manual Programming Patterns * Tip : Pattern programming is under keyboard lock protection. Refer to the “Keyboard Lock Feature” in Chapter 2 for information about disabling the keyboard lock. You can overwrite an existing patte rn using the following procedure. Use caution to ensure that you do not ov[...]

Every day Tasks 3-9 Holding Patterns When you place a pattern on “hold”, you cause the pattern to move to its starting position and wait until you are ready to run it. To hold a pattern, do the following: 1. Enter the monitor number and press (Monitor button) . This monitor will show the pattern. 2. Enter the camera number and press (Camera but[...]

3-10 A DTTE Matrix Keyboa rd Operator's Manual Running Monitor Tours A monitor tour is a selected sequence of camera video inputs, with selected dwell times, to be displayed on the called monitor. The Prog button is used to define the monitor tour. The Run button is used to initia te the monitor tour. The Prog button is under keyboard lock pro[...]

Every day Tasks 3-11 Acknowledging Alarms Your system can be configured to ha ndle multiple alarms. Each alarm can be configured to automatically call up video and initiate an auxiliary, such as an audible alarm. In addition, whenever an alarm is triggered, the keyboard beeps, signaling an active alarm. To acknowledge an active alarm, press the Ack[...]

3-12 A DTTE Matrix Keyboa rd Operator's Manual To activate an auxiliary: 1. Enter the auxiliary number. 2. Press Auxiliary On . If this is a momentary auxiliary, you must press Auxiliary On as long as you want the auxiliary activated. To deactivate a latched auxiliary: 1. Enter the auxiliary number. 2. Press Auxiliary Off . Viewing Satellite S[...]

CHAPTER 4 Utilities and Advanced User T asks This chapter describes tasks that should only be performed by advanced users of the matrix keyboard. These tasks include setting the language, arming and di sarming monitors, displaying the main menu of the switching syst em, and displaying the firm ware version. Many of these tasks are under keyboard lo[...]

4-2 A DTTE Matrix Keyboard Operator's Manual Arming / Disarming Monitors Note: This function can only be performed w ith the keyboard lock disabled. To disable the keyboard lock, refer to Chapter 2 “Getting Started.” When a monitor is armed, the camera video associated with an al arm for that monitor appears when an alarm has been triggere[...]

Utilities and A dvanced User Tasks 4-3 Displaying the Switching System Main Menu Note: This function can only be performed w ith the keyboard lock disabled. To disable the keyboard lock, refer to Chapter 2, Getting Started . The Menu button allows you to view the main menu of the attached switching system. When the main menu for the switching syste[...]

4-4 A DTTE Matrix Keyboard Operator's Manual Displaying the Firmware Version Firmware is the computer instructions programmed into the matrix keyboard. It is unlikely that you will ever need to know the firmwa re version of the keyboard. However, if you should experience a problem with the keyboard, you may need to provide information about th[...]

Utilities and A dvanced User Tasks 4-5 Adjusting LCD Backlighting To adjust the LCD backlighting: 1. Enter 1 and press Config . 2. Use the + and – buttons (located to the right of th e LCD) to adjust the backlighting. • Press + to make the LCD backlighting brighter. • Press – to make the LCD backlighting dimmer. 3. When the backlighting is [...]

4-6 A DTTE Matrix Keyboard Operator's Manual NOTES:[...]

APPENDIX A Software License Agreement 1. General. Software is being licensed to the Customer pursuant to the following terms and conditions, which supplement any purchase or lease agreement (the "Equipment Agreement") between Customer and Sensormatic Electronics Corporation ("SEC"). By accepting receipt of, or by using, such Sof[...]

A- 2 A DTTE Matrix Keyboard Operator's Manual Customer may make up to 2 copies of the Software solely for back-up and archival purposes. Customer will not remove or modify the copyright and other proprietary notices and legends of SEC and its suppliers contained in the Software and Documentation and will reproduce all such notices and legends [...]

Appendix A : Softw are License Agreement A-3 SEC AND ITS SUPPLIERS, EMPLOYEES, AGENTS AND FRANCHISEES WILL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENT IAL OR OTHER DIRECT OR INDIRECT DAMAGES (FOR LOSS OF BUSINESS INFORM ATION OR PROFITS OR OTHERWISE) SUFFERED BY CUSTOMER, ANY OF ITS EMPLOYEES OR AGENTS OR ANY OTHER PERSON ARISING OUT OF OR[...]

A- 4 A DTTE Matrix Keyboard Operator's Manual NOTES:[...]

GLOSSARY alarm The system's response when a camera input changes from its norm al state to its abnormal state (if the system has been configured to respond to such a condition). When an alarm is triggered, the keyboard beeps until you acknowledge the alarm via the Ack button. automatic system function A system operation that, once you program [...]

Glossary-2 A DTTE Matrix Keyboard Operator's Manual latched auxiliary An auxiliary that remains active until it is deactivated using the appropriate off switch. An example of latched auxiliary is a light. When the Auxiliary On button is pressed, the light is turned on. When the Auxiliary Off button is pressed, the light is turned of f. See als[...]

INDEX – A – Alarms acknowledging, 3-11 Arming monitors, 4-2 Auxiliaries controlling, 3-11 – B – Backlighting how to adjust, 4-5 Baud Rate setting / changing, 4-4 values supported, 4-4 – C – Camera controlled by Touch Tracker, 2-1 Camera field, 2-1 Cameras controlling, 3-2 focusing, 3-4 iris control, 3-4 locking/unlocking, 3-5 panning an[...]

Index-2 A DTTE Matrix Keyboard Operator's Manual Unlocking cameras, 3-5 Users, 3-12 Utilities arming / disarming monitors, 4-2 baud rate, 4-4 firmware version, 4-4 language set up, 4-1 main menu, 4-3 – V – Volume adjusting key click volume, 4-5 – Z – Zoom button, 3-4[...]

[...]

© 2004 Sensormatic Electronics Corporation Product specifications subjec t to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of other companies. 8000-2675-02 D Please visit our website for more information www.americandynamics.net[...]