Canon CDI-E350-020 manuel d'utilisation

CDI-E350-020 XXXXXXX © CANON INC. 2008 P RINTED IN JAP AN DPUG15 Direct Print User Guide Y ou don’t even need a c omputer ! Just connect your camera to your printer and print C OP Y[...]

ENGLISH Introduction — Confirm Your Printer Model and the Sec tion that Applies to You Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide. Connect the camer a to the pri nter with an app ropriat e cable and confir m the icon display ed in the camera&[...]

1 * Please also refer to the user guide that ca me with your printer. Depending on the camera model, the screens that will be displayed will vary. Moreover, available settings differ depending on the printer model and the paper size (unavailab le settings will not appear in the menu). For details, refer to the user guide that came with your printer[...]

2 Copyright © 2008 Canon Inc. All rights reserved. For the latest information regarding connections between Canon printers and cameras, please refer to the following URL: http://web.canon.jp/Imaging /BeBit-e.html PictBridge Compliance This camera complies with the industry standar d “PictBridge”*. This allows you to also connect your camera to[...]

3 Table of Contents Direct Pr int . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Allows for Printing without th e Use of a Computer . . . . 6 Various Printing Operations Can Be Performed . . . . . . . 6 You Can Also Perform the Following Printing Opera tions . .7 Printing Movies (Movie Print) . . . . . . . . . . . .[...]

4 Printing wi th Bubble Jet Printers (PIXMA Seri es/ SELPHY DS Series) using PictBridge . . . . . . . . . . . . . . . . . 32 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Easy Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Print after Changing the Print Setting s . . . [...]

5 Printing with Bubble Jet Printers using Bubble Jet Direct . . 71 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Setting the Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Settings that Can Be Set with the Camera . . . . . . . . . . . . . . . . . 74 SELPHY ES Series/SELPHY CP Series P[...]

6 Direct Print Allows for Printing without the Use of a Computer Connect your camera to the printer with the appropriate cable. Image selection and printing is operated from the camera. Various Printing Operat ions Can Be Performed* Multipl e pictures can be print ed at once. (DPOF print se tting) Prints to cover the entire surface o f the paper. O[...]

7 You Can Also Perform the Following Printi ng Operations Printing Movies (Movie Print) You can print a single frame of movies or extract movie f rames at fairly regular int ervals and print them on a single sheet of paper (pp. 25, 46, 64). • Capable printers (This functi on is not availab le on some printers.) Single-frame: Canon SELPHY ES serie[...]

8 Connecting the Ca mera to the Printer Connect the camera to the printer. For instr uctions on printer and camera operation methods, refer to their r espective user guides. Set one of the following into the camera. • Compact power adapter (sold separately) • Fully charged battery • New batteries Place paper, ink cassette /cartridge, etc. int[...]

9 Set the camera to Play back mode and turn the power on. Depending on the camera model, the camera’s power will automatically turn on when the printer’s power is turne d on. The following operations are not available during a camera/pri nter connection. • Language settings that use the FUNC./SET butt on and the MENU button (Depending on t he[...]

10 Printing with SE LPHY ES Series/ SELPHY CP SeriesPrinters using PictBridge Printing Easy Print You can print images by p ressi ng only one button after connecting the camera to the printer. 1 Make sure tha t displays in the upper left corner of th e LCD monitor. 2 Display the images yo u wish to print and pr ess the button. If you wish to change[...]

11 Print after Changing the Print Settings You can change the print settings before printing. 1 Make sure that displays in the upper left corner of the LCD monitor. If displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53). 2 Display th e images you wish to print and press the FUNC./ SE[...]

12 • You cannot print RAW images. • It may not be possible to play ba ck or prin t images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press th e FUNC./SET button. A confirmation dialog will display. Select [O[...]

13 Selecting Print Settings Setting the Date and the File Number Printing Option Default S etting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print E ffect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. 1 Select [ ], then select the date and the file number printing optio [...]

14 Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. Setting the Numbe r of Copies Default Print effects will differ according to your printer’s settings. Refer to your printer’s user gu ide for details. On Uses th[...]

15 Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting th e trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. 1 Select [Trimming] and press the FUNC./SET button. The trimming frame wil[...]

16 2a Trim the image . Changing t he Size of th e Trimmi ng Frame • Press th e zoom lever or the z oom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is vir tually the same size as the image. ?[...]

17 2b Trim the image. Changing the Size of th e Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

18 • The trimming setting only applies to one imag e. • The trimming setting is canceled with the following oper ations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or d etach the connection cable). • All or part of the shooting date w[...]

19 Selecting the Paper Settings 1 Select [Paper Settings] and press the FUNC./SET button. The paper size setting screen appears. 2 Select a paper size* and press the FUNC./SET button. The default settings and specified paper cassette size are displayed. The paper type setting screen appears. * Paper sizes vary according to region. 3 Press the FUNC.[...]

20 4 Select a layout . The following layout can be selected. * A layout cannot be selected whe n printing on card size paper. Default Print effects w ill differ according to your printer’s settings. Refer to your printer ’s user gui de for details. Bordered Prints with a border. Borderless Prints right to the ed ges of the paper. N-up Prints 2,[...]

21 Printing Multiple Images on a Shee t of Paper Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings. [Printing example 1] Printin g 3 copies of image A in 2-up DPOF print setting (p. 28) allows you to separately print different images by specifying the number of frames to be pri nted per image. [P[...]

22 Printing by Specifying the Print Size (ID Photo Print) Selecting [ID Photo] in the layout setting (p. 20) will a llow you to specify the print size and print portion of an image as an ID photo*. * Images printed with the ID Photo Print function may not be allo wed as a formal certif icate photo. Refer to the party (organization) or administratio[...]

23 T Trim the image to specify th e print area. See Step 2 of Setting the Prin ting Area (Trimming) (pp. 16, 17, 18) on how to trim the image. The trimming setting screen differs depending on the camera model. Follow the steps according to the screen that displays on your camera. Pressing the MENU button will cancel trimming. 1.4 inch 1.5 inch 1.8 [...]

24 Printing Images in the F ixed Size Selecting [Fix ed Size] in the la yout setting (p. 2 0) will allow you to print by specifying the print size of the image on a sheet of paper. Select the fixed print size required. Depending on the paper size, you can select print sizes as follows: 5 Select a layout and pr ess the FUNC./SET button. This ends th[...]

25 Printing Movies (Movie Print) Single-frame You can choose a single f rame from a movie and print it on a sheet of paper. 1 Select the movie you want to print, then press the FUNC./ SET button. The movie control panel appears. If you press the button instead of the FUNC./SET button, movie print begins. 2 Display the frame you wish to print on the[...]

26 Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. 5 Select [Print] and press the FUNC./SET button. 2 Select (Print) and press the FUNC./SET button. 3 Select and choose [Sequence]. 4 If necessary, select [On], [Off] or [Default] in (Caption). If you set (Caption) to [On], you can pri[...]

27 • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) • Card size: 20 frames • L size: 42 frames • Postcard size: 63 frames • Wide size: 84[...]

28 Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) m enu, you can specify and print multiple images or all the images on a memory car d. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide . In this section, we will explain [...]

29 • To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date to print in Step 2. • When the print type is set to [Index], the [Date] and [File No.] cannot be printed at the same time. • The ID photo print function cannot be used. • You cannot print movie[...]

30 Cancel Printing • To cancel printing between images printed, press the F UNC./ SET button. A confirmation dialog appears. Select [OK] and press the FUNC./SET button. The printe r will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the FUNC./SET button. The remaining images can be printed.[...]

31 List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer co nnection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions. No Paper Paper cassette is incor rectly inserted or out of paper. Or the paper fe[...]

32 Printing with Bubble Jet Printers (PIXMA Series/SELPHY DS Series) using PictBridge Printing Easy Print You can print images by p ressi ng only one button after connecting the camera to the printer. 1 Make sure tha t displays in the upper left corner of th e LCD monitor. 2 Display the images yo u wish to print and pr ess the button. If you wish t[...]

33 Print after Changing the Print Settings You can change the print settings before printing. 1 Make sure that displays in the upper left corner of the LCD monitor. If displays on the LCD monitor, please refer to Printing with Bubble Jet Printers using Bubble Jet Direct (p. 71) . 2 Display th e images you wish to print and press the FUNC./ SET butt[...]

34 • You cannot print RAW images. • It may not be possible to play ba ck or prin t images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing • To cancel printing between images, press th e FUNC./SET button. A confirmation dialog will display. Select [O[...]

35 Selecting Print Settings Setting the Date and the File Number Printing Option Default S etting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print E ffect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. • On printers equipped with an operation panel, you can cha nge the [...]

36 Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. However, your desired printing r esults may not be obtained depending on the image. If you select an image which has had the shooting date embedded in it using a cam[...]

37 Setting the Number of Cop ies 1 Select [ ] and set th e number of prints. 1 to 99 copies can be set. C OP Y[...]

38 Setting the Printi ng Area (Trimming) You can specify a portion of the image f or printing. Please set [Paper Settings] (p. 42) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings aga in. 1 Select [Trimming] and press the FUNC./SET button. The trimming frame w[...]

39 2a Trim the image. Changing the Size of th e Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Exp[...]

40 2b Trim the image . Changing t he Size of th e Trimmi ng Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is vir tually the same size as the image. • Expanding[...]

41 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camer a power off, change the camera mode, or detach the connection cable). • All or part of the shooting date whi[...]

42 Selecting the Paper Settings 1 Select [Paper Settings] and press the FU NC./SET button. The paper size setting screen appears. 2 Select a paper si ze and press the FUNC./SET button. The following paper sizes* are available: 4" × 6", 5" × 7", 13 × 18 cm, 8.5" × 11", A4, CreditCard, 8" × 10", 10" ?[...]

43 4 Select a layout. The following layout can be selected. * Prints the camera name, shooting mode, shutter speed, aperture value, exposure compensation , ISO speed, etc., from the Exif info rmation. Default Print effects will differ according to your printer’s settin gs. Refer to your printer’s user guide for details. Bordered Prints with a b[...]

44 Printing Multiple Images on a Sheet of Pap er • Selecting [4" x 6"] in the paper size setting ( p. 42) will allow you to specify the following layout settings. [Printing example 1] Printi ng 3 copies of image A in 2-up DPOF print setting (p. 47) allows you to separately pri nt different images by specifying the number of frames to be[...]

45 5 Select a layout and press the FUNC./SET button. This ends the paper setting s operations . The display returns to the print order scree n. • Images will print wit h borders, even if [Borderless] was selected with the camera in the following cases: •When [Plain] is selected in the ca mera's [Paper Type] (cannot be selected depending on[...]

46 Printing Movies (Movie Print) You can choose a single frame from a movie and p rint it on a sheet of paper. 1 Select the movie you wan t to print, then press the FUNC./ SET button. The movie control panel appears. If you press the button instead of the FUNC./SET button, movie print begins. 2 Display the frame you wish to print on the LCD monitor[...]

47 Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please re fer to Setting the DPOF Print Settings section of the Camera User Guide . In this section, we will explain h[...]

48 • To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date in Step 2. • When the print type is set to [Index], both the [Date] and [File No.] cannot be printed depending on the printer. • Depending on the printer, the [File No.] cannot be printed when th[...]

49 Cancel Printing • Press the FUNC./SET button to cancel while printing. A confirmation dialog appears. Select [OK] and pr ess the FUNC./ SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the FUNC./SET button. The remaining images can be printed. • Printing canno[...]

50 List of Messages The following messages may appear on the camera LCD monitor if an error occurs during a camera and printer connection. (Depending on the printer, some messages may not appear.) • Please refer to the printer’s user guide for the ap propriate remedies. : Printing restarts if you select [Continue] and press the FUNC./SET button[...]

51 Printer erro r Disconnec t the cable f rom the printer and t urn off the printer po wer. Then re connect the cable and turn on the printer. If th e error persists, please reques t a repair from your ne arest Cano n Customer Support Cen ter (listed in t he contact lis t provided with the printer). Printer in use The printe r is warmin g up or in [...]

52 Printing with Non-Canon, PictBridge Compliant Printers Printing After this step, follow the procedures in the section Printing with Bubble Jet Printers (PIXMA Series/SELPHY DS Series) using PictBridge (p. 32) to print your images. However, the following menu opt ions cannot be set. • Print Effect (p. 36): [Vivid], [NR], [Vivid+NR], [Face ], [R[...]

53 Printing with SE LPHY CP Series Printers using Canon Direct Print Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. If you use Canon Compact Phot o Printer SELPHY CP750/CP740/CP730/CP720/CP71 0/ CP510 In the following cases, select from [Print Method] in the camera’s [Set up] menu:[...]

54 Print after Changing the Prin t Settings You can change the print settings before printing . 1 Make sure tha t displays in the upper left corner of th e LCD monitor. If displays on the LCD monitor, please refer to Printing with SELPHY ES Series/SELPHY CP Series Printers using PictBridge (p. 10). 2 Display the images you wish to print and press t[...]

55 Selecting Print Settings Setting the Number of Cop ies Setting the Print Style (Image, Borde rs and Date) * 1 This option can o nly be selected wh en printing on car d size paper. * 2 This option can be selected when print ing large size images. Cancel Printing • You cannot stop printing when printing only one copy of an image. If you are prin[...]

56 1 In the prin t order screen , select [Style] and press the FUNC./SET button. 2 Select [Image], [Borders], or [Date]. 3 Select setting s as needed. 4 Press the MENU button to end the setting selection process. With borderless or multiple prints, the top, bottom and sides of the image may be cropped slightly. If you have not specified a trimming [...]

57 Setting the Printing Area (Trimming) You can specify which portion of an image gets printed. Please set the Print Style (Image, Borders and Date) before setting the trimming settings. If the print style is changed after having made the trimming settings, you must select the settings again. • When printing multiple prints, the [Borders] and the[...]

58 2a Trim the image . Changing t he Size of th e Trimmi ng Frame • Press th e zoom lever or the z oom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is vir tually the same size as the image. ?[...]

59 2b Trim the image. Changing the Size of th e Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image. • Expanding the[...]

60 • The trimming setting only applies to one imag e. • The trimming setting is canceled with the following oper ations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or d etach the connection cable). • All or part of the shooting date w[...]

61 Printing by Specifying the Prin t Size (ID Photo Print) You can specify the print size and print a portion of an image as an ID photo*. * Images printed with the ID Photo Print function may not be allo wed as a formal certificate pho to. Refer to the party (organ ization) or administra tion requiring the photo. The print size can be specified fo[...]

62 3 Trim the image to specify the print area. See Step 2 of Setting the Printing Area (Trimming) (pp. 58, 59) on how to trim the image. The trimming setting screen differs depending on the camera model. Follow the steps according to the screen that displays on your camera. Press the MENU button to end trimming. 4 Press the FUNC./SET butto n to clo[...]

63 • The print size setting only applies to one image. • The print size setting is cancel ed with the following operations: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camer a power off, change the camera mode, or detach the connection cable). • The shape of the trimming fra[...]

64 Printing Movies (Movie Print) Single-frame You can choose a single frame from a movie and p rint it on a sheet of paper. 1 Select the movie you wan t to print, then press the FUNC./ SET button. The movie control panel appears. If you press the button instead of the FUNC./SET button, movie print begins. 2 Display the frame you wish to print on th[...]

65 Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. 5 Select [Print] and press the FUNC./SET button. 2 Select (Print) and press the FUNC./SET button. 3 Select and choose [Sequence]. 4 If necessary, sele ct [On] or [Off] in (Caption). If you set (Cap tion) to [On], you can print the fi[...]

66 • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie , there are cases when the number of frames indicated below will not be printed.) • Card size: 20 frames • L size: 42 frames • Postcard size: 63 frames • Wide size: 6[...]

67 Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please re fer to Setting the DPOF Print Settings section of the Camera User Guide . In this section, we will explain h[...]

68 • To print the date, set the [Date] setting in [Print Settings] on the screen in Setting the DPOF Print Settings to [On]. You cannot set the date to print with the [Style] menu in Step 2. • When the print type is set to [Index], the [Date] cannot be printed. • When th e print type is set to [Standard], the [File No.] cannot be printed. •[...]

69 Printing Errors • An error message appears if an error occurs for some reason during the printing process. Select [Stop] or [Resume] and press the FUNC./SET button. * The [Resume] option may not appear with some types of errors. In that case, select [Stop]. C OP Y[...]

70 List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, so me messages may not display.) • Please refer to the printe r’s user guide for solutions. No Paper Paper cassette is incorrect ly inserted or out of paper. Or the pap[...]

71 Printing with Bubble Jet Printers using Bubble Jet Direct Printing After this step, follow the procedures in the section Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53) to print your images. However, please note that so me menus and precautions differ, as listed below. See pages 54 and 68 . 1 Make sure that displays in t[...]

72 See page 55. Setting the Print Style You can select from among the following print styles. Cancel Printing • To cancel printing between images printed, press the F UNC./ SET button. A confirmation dialog appears. Select [OK] and press the FUNC./SET button. The printer will stop printin g the current image and eject the paper. Printing Errors ?[...]

73 See page 68. • The ID photo print function cannot be used. • If you select an image which has had the shooting date embedded in it using a camera with a Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image. • To print the date, set the [Date] se[...]

74 Settings that Can Be Set with the Camera SELPHY ES Series/SELPHY CP Series Printers using PictBridge (When appears on the camera’s LCD monitor during a connection) * Compatible with SELPHY CP series only. Print Options Sele ctable with the Camera Date/File N o. Date File No . Both Off Defaul t Print Effec t Defaul t On Off Red-Eye1 Number of P[...]

75 Bubble Jet Printers (PIXMA Series/ SELPHY DS Series) using PictBridge (When appears on the camera’s LCD monitor during a connection) Print Op tions Selec table with t he Camera Date/File No. Date File No. Both Off Default Print Effe ct Default On Off Vivid NR Vivid+NR Face Red-Eye1 Red-Eye2 Number of Prints 1 to 99 Trimming Movies (Movie Print[...]

76 * Paper sizes vary according to region. Paper Settings Paper Size* 4" × 6" 13 × 18 cm 5" × 7" A4 8.5" × 11" CreditCard 8" × 10" 10" × 12" A3 A3+/13" × 19" 14" × 17" 4" × 7.1" Default Paper Type Photo Fast Photo Fine Art Semi-gloss Plain Default Page Layout D[...]

77 SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct (When or ap pears on the camera’s LCD monitor during a connection) * 1 This option can only be selected when [Cre ditCard] size paper is set. * 2 Paper size will be set au tomatically according to the paper cassette set to the printer. Print Options [...]

78 MEMO C OP Y[...]

79 MEMO C OP Y[...]

80 MEMO C OP Y[...]