Cisco Cisco Line Card 4500 E-Series manuel d'utilisation

REVIEW DRAFT—CISCO C ONFIDENT IAL Americas Hea dquarters Cisc o Syst ems, Inc. 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Catalyst 450 0 E-Series S witc hes Installation Gui de August 20 1 0 Text Pa rt Num ber: OL -13972 -02[...]

REVIEW DRAFT—CISCO C ONFIDENT IAL THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCT S IN THIS MANUAL ARE SUBJECT TO CHA NGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDATI ONS IN TH IS MANUAL ARE BELIEVED TO BE ACCURATE BUT A RE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY[...]

iii Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 CONTENTS Preface vii Audienc e vii Organi zation vii Conv enti ons viii Statemen t 1071—War ning Defi nition ix Relat ed Do cume nta tion xiv Hardwa re Docu ments xv Softwar e Documentat ion xv Cisco I OS Documentat ion xvi CHAPTER 1 Product Ove rview 1-1 Cata lyst 4 503-E S wit[...]

Cont ent s iv Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Power R equir ements 2-13 Powe r Con nec tion G uidel ines for A C-Pow er ed Sy stems 2-13 Powe r Con nec tion G uidel ines for D C-Pow er ed Sy stems 2-14 Cablin g Require ments 2-1 5 Site Pr eparati on Check list 2-15 CHAPTER 3 Instal ling the Swi tch 3-1 Instal lati o[...]

Content s v Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Requir ed Tools an d Componen ts 4-20 Instal ling th e Remote Power -Cycli ng Control Wires 4-20 Instal ling th e Ferr ite Bead 4-2 1 CHAPTER 5 Troubles hootin g 5-1 System Boo t Verifi cation 5-2 Using LE Ds to Ident ify S tar tup Pr oble ms 5-3 System Me ssages 5-4 Troub[...]

Cont ent s vi Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 APPENDI X A Power Suppl y Specific ations A-1 1000 W AC-Input Power Supply A- 2 1000 W AC-Inp ut Powe r Supp ly Sp ecific atio ns A- 3 1000 W Power S upply AC P ower C ords A-4 1300 W AC-Input Power Supply A- 6 1300 W AC-Inp ut Powe r Supp ly Sp ecific atio ns A- 6 1300 [...]

Content s vii Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 APPENDI X C Initi al Configur ation for t he Switch C-1 Connect ing to the Swit ch C-2 Start ing th e Termi nal- Emul atio n Softw are C-2 Conn ecti ng to a Pow er Sour ce C-2 Enter ing th e Initial Config urat ion Info rmati on C-3 IP Se ttings C-3 Perfor ming th e Init[...]

Cont ent s viii Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02[...]

vii Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Preface This pr eface d escrib es the audienc e, organiza tion, and co n ventions o f the Catalyst 4500 E -Series Swi tc hes Inst all ati on Guide and provi des inf ormati on on h ow to obta in relat ed docu menta tion an d techni cal ass istan ce. Audience This guide is in tended[...]

viii Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Preface Conv ent ions Conven tions This docu ment u ses the f ollowing con vention s: Notes us e the follo wing con v entions: Note Means r eader ta ke no te . Notes co ntain helpful suggest ions or references to materi al not cov ered in the publica tion. Cautions use the fol lo[...]

ix Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Pre face Convent ions W arnings use the foll o wing conv entions: Statemen t 1071— Wa rning Definition War ni n g IMPORT ANT SAFE TY INSTRUC TIONS This warning symbol means danger . Y ou are in a si tuation that could cause bodily injury . Before you work on any equipment, be awa[...]

x Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Preface Conv ent ions Wa rnu n g WICH TIGE SI CHERHE ITSHINWE ISE Dieses Warnsymbol bedeutet Gefahr . Sie befinden sich in einer Situation, die zu V erletzungen führen kann. Machen Sie sich vor der Arbeit mit Gerät en mit den Gefahren elektrischer Schaltungen und den üblichen V e[...]

xi Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Pre face Convent ions V arning! VIKTIGA SÄ KERHETS ANVISN INGAR Denna varningssignal signalerar fara. Du befinner dig i en sit uation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanlig[...]

xii Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Preface Conv ent ions Avi s o INSTR UÇÕES IM PORT ANTES DE SEGU RANÇA Este símbolo de aviso signi fica perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos ris cos que envolvem os circ[...]

xiii Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Pre face Convent ions[...]

xiv Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Preface Related Documenta tion Related Documentation Although their rel ease notes ar e unique , the Catal yst 4500, Catalys t 4900, Cataly st ME 4900, and Catalyst 4900M platforms use the same soft ware configuration gu ide, com mand refe rence guide, and system message guide. Re[...]

xv Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Pre face Relat ed Document ation Hardware Documents Installatio n guides and notes including specif ications and rele vant safety informat ion are av ailable at the following U RLs: • Cat alyst 4 500 Serie s Switches Installat ion Gui de http://www .cisco.com/en/US/d ocs/switches[...]

xvi Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Preface Related Documenta tion Software docum ents fo r th e Catal yst 4500 C lassic, Cata lyst 4500 E-Series, Catalyst 4900, and Cisco ME 4900 Series Ethern et Swi tches • Cat alyst 4 500 Serie s Softw ar e Configuration Guid e http://www .cisco.com/en/US/p roducts/hw/switch es[...]

CH A P T E R 1-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 1 Product Overview This chapte r describes the Catalyst 4 500 E-se ries switch es and contain s the se secti ons: • Ca talyst 4503-E Switch, page 1-2 • Ca talyst 4506-E Switch, page 1-6 • Ca talyst 4507R- E Switch, page 1-10 • Ca talyst 4510R- E Switch, page 1[...]

1-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 03-E Swi tch Catalyst 4503-E Switch The Catalyst 4503-E switc h is a 3 -slot horiz ontal c hassis support ing redu ndant p o wer sup plies, a si ngle supervis or engi ne, an d slots for up to t wo modules . Figure 1-1 sho ws a front view of[...]

1-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4503-E S witch Ta b l e 1 -1 Catalys t 4503-E Swit ch F eat ur es Featur e Description Chassis Thr ee hor izontal slots. Sl ots are numb ered fr om 1 (top) to 3 (b ottom). Super visor engin es • Su pports t he fol lowing supervi sor engin es: [...]

1-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 03-E Swi tch Inline po wer Integrated support, 820 W pe r switching module Fan tr ay • T he cha ssis support s one hot -swappab le fan tra y . One fan tray model i s av ailab le: – WS-X 4593-E • T he fan tray contains six individual f[...]

1-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4503-E S witch Ta b l e 1-2 lists the en vironmental and physical specif ications of the Catalyst 4503-E swi tch. Ta b l e 1 -2 Catalyst 4503-E S witc h Spec ifications Item Specification T emp erat ure, a mbien t • O perat ing: 32° to 104°F[...]

1-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 06-E Swi tch Catalyst 4506-E Switch The Ca talyst 4506-E sw itch is a 6- slot ho rizontal chassis sup porting redund ant power sup plies, redunda nt superviso r engine s, and slots for up to f ive module s. Figure 1-2 sh ows a front view of[...]

1-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4506-E S witch Ta b l e 1 -3 Catalys t 4506-E Swit ch F eat ur es Featur e Description Chassis Six horizonta l slots. Slots are num bered fro m 1 (top) to 6 (botto m). Super visor engin es • Su pports t he fol lowing supervi sor engin es: – [...]

1-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 06-E Swi tch Fan tr ay • T he cha ssis support s one hot -swappab le fan tra y . One fan tray model i s av ailab le: – WS-X 4596-E • T he fan tray contains fou r individual fans. The individua l fans are not field repl aceable; you mu[...]

1-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4506-E S witch Ta b l e 1-4 lists the en vironmental and physical specif ications of the Catalyst 4506-E swi tch. Ta b l e 1 -4 Catalyst 4506-E S witc h Spec ifications Item Specification T emp erat ure, a mbien t • O perat ing: 32° to 104°F[...]

1-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 07R-E Swi tch Catalyst 4507R-E Switch The Ca talyst 4507R-E switch is a 7-sl ot horiz ontal cha ssis suppo rting re dundant p ower supplies, redunda nt superviso r engine s, and slots for up to six modules. Fi gure 1-3 shows a front view o[...]

1-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catal yst 450 7R- E Swit ch Ta b l e 1 -5 Catalyst 4507R-E S witc h F eat ure s Featur e Description Chassis Seven horizon tal slots . Slots a re numb ered from 1 (top) to 7 (b ottom ). Super visor engin es • Su pports t he fol lowing supervi sor engi[...]

1-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 07R-E Swi tch Port densi ty • 10/100 (R J-45 )—24 0 port s • 1 0/10 0 with PoE (RJ-45 )—240 port s • 1 0/100 with or without PoE (RJ-21)— 240 ports • 1 00FX (MT -RJ)—240 ports • 1 00LX-10 (MT -RJ) or 100BX-D (LC)— 240 p[...]

1-13 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catal yst 450 7R- E Swit ch Ta b l e 1-6 lists the en vironmental and physical specif ications of the Catalyst 4507R-E switch. Power supply • Su pports one or tw o power supplies. The follo wing po wer supplies are suppo rted: – 1000 W A C -inp ut p[...]

1-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 07R-E Swi tch Dimens ions (H x W x D) and rack u nits ( R U) • 1 9.15 x 17.22 x 12. 50 in. (49 x 44 x 32 cm) • 10 RU W e ight • 45.5 lbs (2 0.68 kg) mini mum wei ght • 100 lbs (45.4 kg) ma ximum we ight Airflo w Chassis fan tray: R[...]

1-15 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catal yst 451 0R- E Swit ch Catalyst 4510R-E Switch The Ca talyst 4510R-E switc h is a 10-slot horizon tal chassis supp orting redu ndant power supplies, redunda nt superviso r engine s, and slots for up to nine module s. Figure 1-4 sh ows a front vi ew[...]

1-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 10R-E Swi tch Ta b l e 1 -7 Catalys t 451 0R-E Switc h F eatu r es Featur e Description Chassis T en hori zonta l slot s. Sl ots ar e numbe red fr om 1 (t op) to 10 (bot tom) . Super visor engin es • Su pports t he fol lowing supervi sor[...]

1-17 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catal yst 451 0R- E Swit ch Fan tr ay • T he cha ssis support s one hot -swappab le fan tra y . One fan tray model i s av ailab le: – WS-X 4582-E (locat ed on the fan tray front pa nel) Note The Catalyst 4510R- E and the C atalyst 4510R+E sw itches [...]

1-18 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 10R-E Swi tch Ta b l e 1-8 lists the en vironmental and physical specif ications of the Catalyst 4510R-E switch. Ta b l e 1 -8 Catalyst 451 0R-E Swi tch Spec ificatio ns Item Specification T emp erat ure, a mbien t • O perat ing: 32° to[...]

1-19 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4 507R+E Swi tch Catalyst 4507R+E Switch The Ca talyst 4507R+E switch is a 7-sl ot horizon tal cha ssis suppo rting re dundant power supplies, redunda nt superviso r engine s, and slots for up to f ive module s. Figure 1-5 sh ows a front view o[...]

1-20 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 07R+E Swit ch Ta b l e 1 -9 Catalys t 4507R+E S witch F eat ure s Featur e Description Chassis Seven horizon tal slots . Slots a re numb ered from 1 (top) to 7 (b ottom ). Super visor engin es • Su pports t he fol lowing supervi sor engi[...]

1-21 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4 507R+E Swi tch Port densi ty • 10/100 (R J-45 )—24 0 port s • 1 0/10 0 with PoE (RJ-45 )—240 port s • 1 0/100 with or without PoE (RJ-21)— 240 ports • 1 00FX (MT -RJ)—240 ports • 1 00LX-10 (MT -RJ) or 100BX-D (LC)— 240 por[...]

1-22 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 45 07R+E Swit ch Ta b l e 1-6 lists the en vironmental and physical specif ications of the Catalyst 4507R+E switch. Power supply • Su pports one or tw o power supplies. The follo wing po wer supplies are suppo rted: – 1000 W A C -inp ut p[...]

1-23 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4510R+E Switch Catalyst 4510R+E Switch The Ca talyst 4510R+E sw itch is a 10-slot hor izontal ch assis suppor ting redund ant power supplies, redunda nt superviso r engine s, and slots for up to nine module s. Figure 1-6 sh ows a front vi ew of[...]

1-24 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 4510R+ E Switch Figur e 1 -6 C atal yst 451 0R+E Sw itch Chassis (F ro nt View) Ta b l e 1-1 1 descr ibes the featu res of the Catalyst 4510R+E switc h. 1 Fan tr a y 3 Superviso r engi nes (prim ary in slot 5 and secondary in slot 6) 2 Switch[...]

1-25 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4510R+E Switch Ta b l e 1 -1 1 Catalyst 45 1 0R+E Sw itch F eat ur es Featur e Description Chassis T en horiz onta l slot s. Sl ots ar e numbe red fr om 1 (t op) to 10 (bot tom) . Super visor engin es • Su pports t he fol lowing supervi sor e[...]

1-26 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 4510R+ E Switch Fan tr ay • T he cha ssis support s one hot -swappab le fan tra y . One fan tray model i s av ailab le: – WS-X 4582+E • T he fan tray c ontains ten individual fans. T he ind ividual fans a re not field repl aceable; you [...]

1-27 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overview Catalyst 4510R+E Switch Ta b l e 1-1 2 lists the environment al and physic al specificati ons of the Cataly st 4510R+ E swit ch. Ta b l e 1 -12 Catalyst 45 1 0R+E Sw itch Specifi cations Item Specification T emp erat ure, a mbien t • O perat ing: 32°[...]

1-28 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 1 Product Overvi ew Cataly st 4510R+ E Switch[...]

CH A P T E R 2-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 2 Preparing for Installation Planni ng a proper loc ation fo r the switch and the lay out of your eq uipment rack or wi ring close t is essential for suc cessful system op eration. Y ou should install the switch in an encl osed, secure a rea, ensurin g that only qua l[...]

2-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Site Requireme nts War ni n g This equipment must be grounded. Never def eat the ground conductor or operate the equipm ent in the absence of a suitably installed ground conductor . C ontact the appropriate electrical inspection authority or an[...]

2-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Inst allation Site Requirements • Do not place it where it will recei ve direct sunlight , particular ly in the afternoon. • D o not p lace i t next to a heat source of any kind, includ ing hea ting vents. • Adequate ventilat ion is particularly impor[...]

2-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Site Requireme nts • V erif y tha t the enc losed o r par tially enclo sed ra ck all ows an adequa te flow of ai r thro ugh th e switc h chass is a s follows : – If the di ff erence betwe en the measur ed intake air tempera ture and the e x[...]

2-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Inst allation Site Requirements Figur e 2-1 Cat alyst 4500 E-Ser ies Airflow (Ca talyst 4506-E C hassi s Shown) Humidity High-humidi ty conditions can cause moisture migration and pene tration into the system. This mois ture can ca use c orrosion of in tern[...]

2-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Site Requireme nts Dust and Particles Fans cool power supplies and system comp onents by drawing in room t emperature air and exhaus ting heated a ir out th rough various open ings in the chassis. H o wev er , fans also i ngest dust and other p[...]

2-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Inst allation Site Requirements Note T o predi ct and rem edy strong EM I, you may also need to consult experts i n radio fre quency inter ference (RFI). If you use twi sted-pai r cable in your plant w iring wi th a good dist ribution of ground ing cond uct[...]

2-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Site Requireme nts Besides these applia nces, the greate st threats to a system power supply are sur ges or bl ackou ts that are caused by electr ical st orms. W henev er possible, turn off the syst em and any periphe rals, and unp lug them fro[...]

2-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Inst allation Site Requirements Note In all situations, gro unding practices m ust comply with Sect ion 250 of the Nati onal Electr ic Code (NEC) requirem ents or l ocal l aws and regulat ions. A 6 A WG grounding wire is prefe rred from the c hassis to the [...]

2-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Site Requireme nts Note In installations w here FXS modules ar e installed, supplement al grounding i s required. Note Always ensu re that all of the modules are compl etely installed and tha t the capti ve installa tion scre ws are f ully tig[...]

2-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Inst allation Site Requirements • U se app roved po wer ca bles onl y . Y ou have been pr ovided with on e or m ore power ca bles w ith your chass is power suppl y that are inten ded for use in your countr y , ba sed on t he sh ipping l ocatio n. Should [...]

2-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Site Requireme nts After you install t he system gr ound lug, f ollo w these steps to co rrectly at tach th e ESD wri st strap: Step 1 Atta ch th e ESD wris t st rap to bar e ski n as fo llows: a. If you are using th e ESD wrist s trap su ppli[...]

2-13 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Inst allation Power Requirements Power Requirements When pr epar ing your site f or the sw itch i nstallat ion, fol low these requ ireme nts: • In systems co nfigured wit h two power supplies, c onnect each of t he two power supplies to a separa te input[...]

2-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Power Requ irements • If you are using a 200/ 240 V A C po wer s ource in North America, t he cir cuit mus t be p rotected by a two- pole circ uit break er . • The source A C outlet must be within 6 f eet ( 1.8 meters) of the system and sh[...]

2-15 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Inst allation Cabli ng Requir ements Cabling Requireme nts Cautio n The intr abuildin g port(s) of the equipment or subassembly is suitable for connection to intrabu ilding or unexposed w iring or cabl ing only . The i ntrabuilding port(s) of the equipme n[...]

2-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 2 Preparing for Installation Site Preparati on Checklist Ta b l e 2-2 Site-Pl anning Chec klist Ta s k N o . Plan ning A ctivit y V erified by Ti m e Date 1 Space e v alua tion: • Sp ace a nd layout • Floor c ov eri ng • Impact and vib ration • Lighting • Mainte[...]

CH A P T E R 3-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 3 Installing the Switch Revised: October 25, 2011 This chapter describes ho w to install Cataly st 4500 E-s eries s witches in an equi pment ra ck. The cha pter conta ins the f ollowing sect ions: • Installation Process, page 3-2 • Ra ck-M ounting G uidel ines, pa[...]

3-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Installing the Switch Installa tion Proces s Installation Proc ess The process of installi ng the switch ca n be broken do wn into a series of task s. These tasks are listed in Ta b l e 3-1 . Ti p For additional informatio n about the Cisco Catalyst 4500 E-ser ies switc [...]

3-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Ins talling the Switch Rack-Mo unting Gui deli nes Note Al l of the Catalyst 4500 E-series switch chassis ar e designed to ins tall in sta ndard 19- inch r acks. • The rack must ha v e suf f icient vertic al clearan ce to insert the chassis . The chassis heights ar e a[...]

3-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Installing the Switch Unpacki ng the Switch Unpacking the Switch T o check t he c ontents of the shippi ng cartons, follo w these st eps: Step 1 Check the contents o f the accessor ies box agai nst the acc essorie s box compone nts checkl ist and the packing slip that we[...]

3-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Ins talling the Switch Installing the Switch in a Rack • T ape m easure • Level • Y our own elec trostatic di scharge (ESD) gr ounding str ap or the disp osable ES D strap inc luded wit h the system Installing th e Catalyst 4500 E-Serie s Switches in a Rack T o ins[...]

3-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Installing the Switch Installi ng the Switc h in a Rack Figur e 3-1 Installing the S witch in the Rack (Catalyst 4506-E Sw itch Sho wn) a. Attac h the c able guide, i f need ed, u sing the M3 screws provide d in t he cab le ma nageme nt kit. The cable gu ide attaches to [...]

3-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Ins talling the Switch Esta blish ing t he Sy stem Grou nd Con nec tion Figur e 3-2 At tac hing the Cable Guid e to the Chassis (Catalys t 4506-E S witc h Sho wn) Step 6 V erify that on a ll install ed superv isor engine s and switc hing modul es, the ej ector levers are[...]

3-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Installing the Switch Establis hing the Syst em Ground Con nection Required To ols and Pa rts T o con nect the syste m ground , you need the fo llowing tools and part s: • G rounding lug—A two- hole stan dard barre l lug tha t support s up to 6 A WG w ire. Th e groun[...]

3-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Ins talling the Switch Completing the Installation Process Figur e 3-3 Connect ing Sys tem G round on the S witc h Step 5 Place t he grou nding l ug agai nst the groun ding pad making sure t here is good m etal-to- metal cont act between th e lug and the bare metal of th[...]

3-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Installing the Switch Completi ng the Installa tion Process Connectin g the Su pervisor Engin e Console Port This se ction describe s how to conn ect a term inal or mode m to the superv isor engine consol e port . The console port on the supervi sor eng ine al lows you [...]

3-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Ins talling the Switch Completing the Installation Process Connectin g the Superv isor Engine Up link Ports This se ction de scribes how to connec t to the super visor e ngine upl ink po rts. Some supervi sor engine uplink port s may require the in stallation o f transc[...]

3-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 3 Installing the Switch Completi ng the Installa tion Process[...]

CH A P T E R 4-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 4 Removal and Replacement Pro cedures This c hapter d escrib es how to per form re mov al and replac ement proced ures for the f ollowing Catalyst 4500- E series f ield-repl aceab le units (F R Us): • Re moving and Installing the AC-Input Power Supplies, page 4-2 ?[...]

4-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installing the A C-Inpu t Power Supplies War ni n g Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when conne cted to po[...]

4-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and Installing the AC-Input Power Supplies Figur e 4-1 A C-Input P ower Supp ly (Single-Inpu t) Figur e 4-2 Dual-Input A C-Input P ow er Supply (42 00 W and 6000 W ) Required To ols Y ou need a flathead or Phillips-head scr [...]

4-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installing the A C-Inpu t Power Supplies Removin g an AC-Input P ower Supply T o r emove the AC-input power supply , follow these steps: Step 1 Set the A C -input po wer supply po wer switch to the of f (0) position (see[...]

4-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and Installing the AC-Input Power Supplies Figur e 4-5 Loosenin g the Captiv e Scr ews Cautio n Use both hands to grasp and supp ort a power supply . Step 5 Grasp th e power supply ha ndle with on e hand. Pl ace you r other [...]

4-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installing the A C-Inpu t Power Supplies War ni n g Blank faceplates and cover panels serve three im portant functions: they prevent exposure to hazardous voltages and currents inside the chassi s; they contain electroma[...]

4-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and Installing the AC-Input Power Supplies Figur e 4-7 Plugging the P ow er Cor d int o the P o wer Su pply Step 9 Plug the other e nd of the power cord to sourc e A C. Note In a chassis with dual po wer supplies or po wer s[...]

4-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installing the D C-Inpu t Power Supplies Removing and Installing the DC-Input Power Supplies This sec tion describes ho w to remov e and in stall the DC-input po wer supplie s and contai ns the follo wing topics: • Re [...]

4-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and Installing the DC-Input Power Supplies Figur e 4-9 DC-Input P ower Su pply Figur e 4-1 0 DC T r iple-Inpu t P o wer Supp ly Step 4 Disconne ct the DC -input wire s from the terminal b lock. Discon nect th e ground wire l[...]

4-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installing the D C-Inpu t Power Supplies Figur e 4-1 1 Connect ing the DC-In put Wir es Figur e 4-1 2 Connecting the DC-Input Wir es (T ripl e-Input P o w er Supply) Step 5 Loosen the two capti ve scre ws on the po wer [...]

4-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and Installing the DC-Input Power Supplies Step 6 Grasp the power supply han dle with on e hand. Pl ace yo ur other ha nd under neath as you slowly pull the power supply out o f the chassis power suppl y bay (s ee Figu re 4[...]

4-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installing the D C-Inpu t Power Supplies War ni n g Use copper conductors only . Statement 102 5 War ni n g When stranded wiring is required, use approved wi ring terminations, such as closed-loop or spade-type with upt[...]

4-13 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and Installing the Chassis Fan Tray Assembly Step 11 Chec k the power supply and syste m stat us from the sy stem c onsol e by en tering th e show po wer comm and. For more informa tion on th e comm ands, see t he comma nd [...]

4-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removi ng and Instal ling the Chas sis F an Tr ay Asse mbly Figur e 4-1 5 Catalyst 45 06-E S yst em F an T ray Assembly Step 2 Grasp the fan tray assemb ly handle and slide the fan tray assemb ly out of the chass is; gently move it [...]

4-15 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and I nstal ling t he Backp lane Modules Verifying the Installation Note T o che ck th e opera tion of the fa ns, yo u need to power up t he ch assis. T o verify that the new fa n tray assembly is install ed correctly and i[...]

4-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installi ng the Backpl ane Mod ules Note Generic swit ching mo dule repl aceme nt proced ures ar e docume nted at http://www .cisco.com/en/US/d ocs/switches/la n/catalys t4500/hardwar e/conf iguration/not es/gM dCf_nt.h[...]

4-17 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Removing and I nstal ling t he Backp lane Modules Step 7 If you ar e removing a cl ock modul e, remove the two screws that secure t he clock module to the backpl ane. Step 8 Locate the seat ing lev ers on both sides of the connector[...]

4-18 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Removing and Installi ng the Backpl ane Mod ules Figur e 4-1 9 Remo ving the M odule Step 11 Remove the repl acemen t module from its packaging . Be careful not to touc h the chips or the gold edge conta cts on the mo dule. Step 12 [...]

4-19 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Installing the Remote Power Cycling Feature Control Wires (Optional) Step 15 If you a re insta lling a c lock mo dule, sec ure the mod ule to the backpl ane using the two screws fr om the earlie r removal. Step 16 Reinst all th e su[...]

4-20 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Installing the Remote Pow er Cycling Fe ature Con trol Wires (Optio nal) Required Tools and Components The fo llowing tools and co mpone nts are requi red to per form thi s procedur e: • Re lay contro ller box. W e strongl y recom[...]

4-21 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 4 Rem oval and Replacem ent Procedure s Installing the Remote Power Cycling Feature Control Wires (Optional) Figur e 4-2 2 Instal ling the Re lay Con tro l Wir es Y ou are now ready to instal l the ferrite bead on the contro l wires. Follo w th e installati on instruction[...]

4-22 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapt er 4 Removal and Repl acement Procedu res Installing the Remote Pow er Cycling Fe ature Con trol Wires (Optio nal) T o install the f errite bead on the remote po wer-c ycling con trol wires, f ollo w these ste ps: Step 1 Remov e the f errite bead and the two plastic ties f [...]

CH A P T E R 5-1 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 5 Troubleshooting This c hapter d escribes how to perfor m basic troublesh ooting on the C atalyst 45 00 E- series switch. Problems with the i nitial startup are ofte n caused by a switch ing module that has become dislod ged from the bac kplane or a power cord that i[...]

5-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting System B oot Verificatio n • Troubleshooting the F an Assembly , page 5-6 • Troubleshooti ng Backpl ane Modu les, page 5-7 • Trou bleshooting Switching Mo dules, page 5-8 • Troublesh ooting Sup ervisor Engines, pa ge 5-10 • Som e Problems and S[...]

5-3 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Using LEDs to Identify Startup Problems Using LEDs to Identify Startup Problems The ke y to success when troubleshoo ting the system is to isolate the problem to a specif ic system comp onent. Y our first step is to compare what t he system is doing to w[...]

5-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting System M essag es Step 5 If the boot inf ormatio n and system banne r are not displ ayed, verify tha t the termina l is set for 9600 bau d, 8 data bits, no pa rity , a nd 1 stop bi t and connec ted p roperl y to t he con sole port. System Messages System[...]

5-5 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Troubl eshoot ing the Pow er Supply Step 5 If the LED labeled GOOD still fails to light whe n the switch is connected to a differe nt po wer source with a new power cord, the power sup ply is probably faulty . See t he “System Messages a nd Power Probl[...]

5-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Troubl eshoo tin g the Fan Ass embl y Useful CL I Comman ds Y ou may also use the show en vironment status p owersupply , show module all , and show power commands to monito r PS status, load, and ac tiv ity . If the show module comman d output shows a m[...]

5-7 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Troubl eshooting Ba ckplane Modules Step 8 If the system is still detectin g a fan assembly fa ilure, check for detai ls using the CLI and contact the Cisco T AC for assistance. System Mes sages and Fan Problems Look for system message s repor ting a tem[...]

5-8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Troubles hooting Sw itching Modul es • Th e outpu t-fail LED on the power supplies are red and no power is deliv ered to the chassis. The other LEDs o n the power supply are g reen. • Th e Status LE Ds on the sw itching modules an d the supervis or e[...]

5-9 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Troubleshooting Switching Modules System Mes sages and S witching M odules Connect a terminal to the con sole port, and look for an y of the follo wing system messages: C4K_CHASSIS- 3-LINECAR DMUXBUFFER TOSUP ALIGNM ENTWR ONG C4K_CHASSIS- 3-LINEC ARDNO T[...]

5-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Troub lesho oting Su perviso r Engine s Troubleshooting Supervi sor Engines This se ction on ly add resses problems with ha rdware. Pr oblems with f eatures or configur ation a re not covered here. Refer for y our soft ware c onfiguration g uide a nd re[...]

5-11 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Troubl eshooti ng Superv isor Engi nes C4K_HW -3-X2OUI REGREADF AILURE C4K_HW A CLMAN -4-CLASSIFC AMP ARITYERR OR C4K_HW A CLMAN-4 -CLASSIFCAMR EPL YP ARITYE RR OR C4K_HW A CLMAN-4 -CLASSIFC AMREQP ARITYER R OR C4K_ HWNETF LO WMAN-3 -NETF LO WST OPPED C[...]

5-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Troub lesho oting Su perviso r Engine s Useful CL I Comman ds Some proble ms can be sol ved by resetting the supervi sor engi ne. Use th e hw-module module <n> reset power-cycl e command to reset a switchi ng module, or remo ve an d re-insert the [...]

5-13 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Troubl eshooti ng Superv isor Engi nes • Con figuration register • Ca lendar • VLAN database If a software up grade is perf ormed on both the act iv e and stand by supervisor en gines, verify t hat both superv isor en gines are r unning the same n[...]

5-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Troub lesho oting Su perviso r Engine s • A bad por t • Spe ed and duplex mismat ch • N etwork inter face card (NIC) issues If you t roublesh oot these comm on reason s and you a re not ab le to n arrow down the proble m, follow the steps in this [...]

5-15 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Troubl eshooti ng Superv isor Engi nes If the sta tus is “po wer -bad, ” the switch detec ts a switching m odule b ut is una ble to alloca te po wer . This situation is possible if the supervisor engine c annot able to acce ss the serial PR OM (SPRO[...]

5-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Troub lesho oting Su perviso r Engine s NIC Compatibility Issues Y ou c an ha ve NIC com patibility or misconf igurat ion issues wi th the switc h if you exper ience one of these symptoms: • A server or client conn ection to the switch doe s not come [...]

5-17 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Troubl eshooti ng Superv isor Engi nes Boot Problem s If the sw itch i s in a con tinuou s boot loo p, is i n R OMmon m ode, or does n ot have a system i mage, t here is most ly likely n ot a hard ware pro blem. Th e supe rvisor e ngine operate s in a c[...]

5-18 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Contacting the Cisco Te chnical Ass istance Cent er Step 7 If you canno t conn ect to the sw itch th rough t he me 1 inter face, make sure th e conn ected device is configured for half-d uplex 10-M bps op eration . Step 8 If the host is in the same su b[...]

5-19 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Troubleshoot ing Contac ting the Ci sco Techni cal Assistan ce Cent er • Maintenance agreement or warranty info rmation • Bri ef descr iption of the problem • Console capt ures rel ated to y our p roble m • Bri ef expl anation of th e ste ps you h ave already ta[...]

5-20 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Chapter 5 Trouble shooting Contacting the Cisco Te chnical Ass istance Cent er[...]

A- 1 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 APPENDIX A Power Supply Specifications Revised: October 2011 This appe ndix describe s the power supplies supp orted on t he Catalyst 450 0 E-series switches. Th e appendi x contai ns the following sectio ns: • 100 0 W AC-Input Power Supp ly , page A- 2 • 130 0 W AC-Input Pow[...]

A- 2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1000 W AC-Input Power S uppl y 1000 W AC-Input Power Supply The 100 0 W A C-input power supply (PW R-C45- 1000A C), shown in Figure A-1 , is suppo rted in the follo wing Catalyst 4500 E-Series switch es: • Ca talyst 4503-E • Ca talyst 4[...]

A-3 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1000 W AC-Input Power Supply 1000 W AC-Input Power Su pply Specifications Ta b l e A- 1 lists the sp ecif ications for the 1000 W A C-input power supply . Ta b l e A -1 1 000 W A C-Input P o w er Supply Specific ations Item Specification A [...]

A- 4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1000 W AC-Input Power S uppl y Ta b l e A- 2 lists the 1000 W A C-input power supply LEDs and thei r meanings. 1000 W Power Su pply AC Powe r Cords Ta b l e A- 3 lists the sp ecif ications for the re giona l A C po wer cord s that are a v a[...]

A-5 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1000 W AC-Input Power Supply Ta b l e A -3 1 000 W A C P ow er Supply P ow er Cor ds Locale Power Cor d Part N umber Leng th Cordset Rating Plug T y pe North Amer ica CAB-US515-C15-U S= (was CAB-7KAC=) 8.2 ft (2.5 m) 15 A, 125 VA C NEMA 5-1[...]

A- 6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1300 W AC-Input Power S uppl y 1300 W AC-Input Power Supply The 130 0 W A C-input power supply (PWR-C4 5-1300ACV), shown in Fig ure A-2 , is supported in the follo wing Catalyst 4500 E-ser ies switche s: • Ca talyst 4503-E • Ca talyst 4[...]

A-7 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1300 W AC-Input Power Supply Ta b l e A- 4 1 3 0 0 W AC-Input P ower Su pply Specific ations Item Specification A C-input ty pe Autoran ging input with po wer f actor correc tor Note Power factor corre ction i s a standard featur e on al l [...]

A- 8 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1300 W AC-Input Power S uppl y Ta b l e A- 5 lists the 1300 W A C-input power supply LEDs and thei r meanings. 1300 W Power Su pply AC Powe r Cords Ta b l e A- 6 lists th e speci f ications for th e A C powe r cor ds that are a v ailable fo[...]

A-9 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1300 W AC-Input Power Supply Ta b l e A -6 1300 W AC-In put P o wer Su pply P o wer Cor ds Locale Power Cor d Part N umber Leng th Cordset Rating AC S our ce Plu g T yp e North Amer ica CAB-US520-C19-U S= (was CAB-7513 A C=) 14 ft (4.3 m) 2[...]

A-10 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1400 W AC-Input Power S uppl y 1400 W AC-Input Power Supply The 140 0 W A C-input power supply (PW R-C45- 1400A C), shown in Figure A-3 , is suppo rted in the follo wing Catalyst 4500 E-ser ies switche s: • Ca talyst 4503-E • Ca talyst [...]

A-11 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1400 W AC-Input Power Supply Figur e A- 3 1 4 0 0 W AC-In put P o wer Su pply F eatur es 1400 W AC-Input Power Su pply Specifications Ta b l e A- 7 lists the sp ecif ications for the 1400 W A C-input power supply . 1 A C-in put recept acle[...]

A-12 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1400 W AC-Input Power S uppl y Ta b l e A- 8 list the 1 400 W A C-input power supply LEDs and th eir me anings. Branch cir cuit requir ement Each chassis p ower supply shoul d hav e its own dedic ated, fuse d-branch circuit: • For N orth [...]

A-13 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1400 W AC-Input Power Supply 1400 W Power Su pply AC Powe r Cords Ta b l e A- 9 lists th e speci f ications for th e A C powe r cor ds that are a v ailable for t he 1400 W A C-input power supply . The tabl e includes a power plug i llustra[...]

A-14 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1400 W AC-Input Power S uppl y Italy CAB-C2316-C19-IT = (was CAB-7513 A CI=) 14 ft (4.3 m) 16 A, 2 50 V A C 1/3/16, C EI 23 -16 United Kingdom CAB-BS13 63-C19-UK = (was CAB-7513 A CU=) 14 ft (4.3 m) 13 A, 2 50 V A C BS 89/13 BS 1363/A Argen[...]

A-15 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1400 W DC-Input Power Supply 1400 W DC-Input Power Supply The 140 0 W DC-input power suppl y (PWR-C45-140 0DC-P), shown in Figure A-4 , is supported in the follo wing Catalyst 4500 E-ser ies switche s: • Ca talyst 4503-E • Ca talyst 45[...]

A-16 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1400 W DC-Input Power S uppl y 1400 W DC-Input Power Supply Specifications Ta b l e A- 10 lists the specif ications for th e 1400 W DC-inp ut power supply . Ta b l e A- 10 1 4 0 0 W D C-Input P owe r Supply Specifications Item Specification[...]

A-17 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1400 W DC-Input Power Supply Ta b l e A- 11 list the 1400 W DC-input p ower supply LEDs a nd thei r meani ngs. Ta b l e A- 12 lists the chassis specif ic power usage numbe rs for the 1400 W DC-input power supply . Ta b l e A- 11 1 4 0 0 W [...]

A-18 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1400 W Tripl e-Input DC -Input Power Su pply 1400 W Triple-Input DC-In put Power Su pply The 140 0 W triple-in put DC-inpu t pow er suppl y (PWR-C45-14 00DC), shown in Figure A-5 , is supported in the follo wing Catalyst 4500 E-seri es swi [...]

A-19 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1400 W Triple-Inpu t DC-Input Power Supply Power supply outpu t • 8 A (min ) to 115.3 A (max) @ +1 2 VDC • 1.2 A (min) to 12.5 A (m ax) @ +3.3 VDC • 1360 W+ 40 W redunda nt mode 2450 W maximu m in combine d mode DC input terminal blo[...]

A-20 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1400 W Tripl e-Input DC -Input Power Su pply Ta b l e A- 14 list the 1400 W triple-inpu t DC-in put power su pply L EDs and their meani ngs. Ta b l e A- 15 lists the 1400 W triple-inpu t DC-in put power suppl y inp ut modes a nd out puts. C[...]

A-21 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1400 W Triple-Inpu t DC-Input Power Supply Power output also depe nds on whethe r two suppl ies are used , and w hether they are i n redu ndant o r comb ined mode. Ta b l e A- 16 provides a ma trix of po ssible out puts in com bined mode d[...]

A-22 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 1400 W Tripl e-Input DC -Input Power Su pply 1400 W DC Triple-Input Power Supply O perationa l Modes The 140 0 W triple- input DC-i nput power supply (dat a only) al lows added redunda ncy by providing terminals for two DC inputs rated at 1[...]

A-23 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 1400 W Triple-Inpu t DC-Input Power Supply Note In a redu ndant configurati on with all i nputs sup plied , there must be a 100 W mini mum s ystem load or the OUTPUT F AIL LED sho ws a false failu re. The 140 0 W triple- input DC-inpu t po[...]

A-24 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 2800 W AC-Input Power S uppl y 2800 W AC-Input Power Supply The 280 0 W A C-input power supply (PWR-C4 5-2800ACV), shown in Fig ure A-3 , is supported in the follo wing Catalyst 4500 E-ser ies switche s: • Ca talyst 4503-E • Ca talyst 4[...]

A-25 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 2800 W AC-Input Power Supply Branch circu it requirem ent Each ch assis power supply should have its own dedicated, fused-bra nch circuit: • For N orth Amer ica—15 A or 20 A • For Internation al—Circuits sized to local and nationa [...]

A-26 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 2800 W AC-Input Power S uppl y Ta b l e A- 22 de scribes the 280 0 W A C-inp ut power suppl y LED s and t heir m eanings. Ta b l e A- 2 2 2 8 0 0 W AC-Input P ow er Supply LEDs LED Colo r/S tate Descriptio n INPUT OK Indicates whe ther the [...]

A-27 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 2800 W AC-Input Power Supply 2800 W Power Su pply AC Powe r Cords Ta b l e A- 23 lists the spe cif ications for the A C powe r cords tha t are av ailable for the 2800 W A C-i nput power supply . Note All 280 0 W AC-input p ower supply po w[...]

A-28 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 4200 W AC-Input Power S uppl y 4200 W AC-Input Power Supply The 420 0 W A C-input power supply (PWR-C4 5-4200ACV), shown Figure A-7 , is supporte d in the follo wing Catalyst 4500 E-ser ies switche s: • Ca talyst 4503-E • Ca talyst 4506[...]

A-29 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 4200 W AC-Input Power Supply Ta b l e A- 2 4 4 2 0 0 W AC-Input P ow er Supply Specific ations Item Specification A C-input ty pe Autoran ging input with po wer f actor correc tor Note Power factor corre ction i s a standard featur e on al[...]

A-30 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 4200 W AC-Input Power S uppl y Power supply outpu t capacity The power su pply ou tput ca pacity is depe nden t on the numb er of AC po wer co rds (1 or 2) attach ed, the sour ce A C v oltage ( 110 VA C [low-line] or 220 V A C [high- line] [...]

A-31 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 4200 W AC-Input Power Supply Ta b l e A- 25 de scribes the 420 0 W A C-inp ut power suppl y LED s and t heir m eanings. Note Th e 4200 W A C power supply shoul d not be used in mi xed-voltage configurat ions. All the inpu ts in a chass is [...]

A-32 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 4200 W AC-Input Power S uppl y Ta b l e A- 27 sh ows the maximum outp ut wattage wit h two 4200 W A C-input po wer supp lies opera ting in comb ined mode . 4200 W Power Su pply AC Powe r Cords Ta b l e A- 28 lists the spe cif ications for t[...]

A-33 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 4200 W AC-Input Power Supply Ta b l e A -28 4200 W AC-Input P ow er Supply P ower Cor ds Locale Power Cor d Part N umber Leng th Cordset Rating AC S our ce Plu g T yp e North Amer ica 120 VA C operati on CAB-US515 P-C19-US 9.8 ft (2.98 m) [...]

A-34 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 6000 W AC-Input Power S uppl y 6000 W AC-Input Power Supply The 600 0 W A C-input power supply (PWR-C4 5-6000ACV), shown in Fig ure A-8 , is su pport ed in follo wing Catalyst 4500 E-series switch chassis: • Ca talyst 4503-E • Ca talyst[...]

A-35 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 6000 W AC-Input Power Supply Figur e A- 8 60 0 0 W Dual-Input AC P ower Suppl y 6000 W Power Su pply Specifications Ta b l e A- 29 lists the specif ications for th e 6000 W A C -input power supplies . 1 A C-input 2 recepta cle 4 A C-input [...]

A-36 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 6000 W AC-Input Power S uppl y Ta b l e A- 30 list the 6000 W A C-inpu t power supply LEDs an d their meaning s. Power supply outpu t T ot al output depends on the numb er of inp uts conne cted and t he sourc e A C voltage. If t wo inputs a[...]

A-37 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 6000 W AC-Input Power Supply Note Th e 6000 W A C-inpu t power supply should no t be used in mixed-voltage configu rations. All the inputs in a chass is must be at the sa me v oltage (110 VA C o r 2 2 0 VA C ) . Ta b l e A- 31 shows the wa[...]

A-38 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 6000 W AC-Input Power S uppl y 6000 W Power Su pply AC Powe r Cords Ta b l e A- 33 lists the spe cif ications for the A C powe r cords tha t are av ailable for the 6000 W A C-i nput po wer supply . The table includ es references to po wer c[...]

A-39 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 6000 W AC-Input Power Supply North Amer ica (locki ng) 200–240 V A C operati on CAB-A C-28 00W -TWLK = CAB-L6 20P-C19-U S= 13.6 ft (4.1 m) 16 A, 2 50 VA C NE MA L6-2 0 Australia CAB-A C -16A-A US CAB-A311 2-C19- A US= 14 ft (4.3 m) 16 A,[...]

A-40 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications 6000 W AC-Input Power S uppl y Remote P ower Cy cling Fe ature The 6 000 W AC-input power suppl y is equi pped wit h a remote power cycling fe ature tha t allows you t o remotely turn on or turn of f the power supply thro ugh an external r [...]

A-41 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix A Power Supply Spe cifications 6000 W AC-Input Power Supply Ferrite B ead A plasti c bag conta ining on e ferrite bead and two 4- inch plas tic ties is included with the 6000 W power supply AC po wer cords. The ferrit e bead is a pa ssiv e device that limi ts high-f req[...]

A-42 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix A P ower Supply Specifications Environme ntal Moni toring Fe ature Environme ntal Monitoring Feature W ith the en vironm ental monitor ing an d re porting featur e, you can keep your system runnin g by resolving advers e en vironmental conditions before a loss of opera t[...]

B-1 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 APPENDIX B Repackin g a Switch This a ppendix describe s how to retur n your Cataly st 4500 E- series swi tch to the factory a nd how to repack your sw itch i n prepa ration for shi pping. Ta b l e B-1 lists the packaging dimensions an d weights for th e Catal yst 4500 E -series c[...]

B-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix B Repacking a Switch Figur e B-1 Catalyst 4500 E-Ser ies Swit ch P acking Ma te r ial Packing carton Packing foam Packing foam Packing foam Documentation and accessories 68117[...]

C-1 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 APPENDIX C Initial Co nfiguration for the Switch Revised: October 25, 2011 This appendi x provides an initia l setup procedure for a switch and contains the fol lo wing topics: • Connect ing t o the Swi tch, page C-2 • Starting the T erminal-Emulation Softw are, page C-2 • C[...]

C-2 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix C Initial Configuration for the Switch Connecting t o the Switch Connecting to the Switch Y ou must use th e consol e port to p erform t he init ial configurati on. T o conn ect the switch conso le port t o a PC, use an RJ-45- to-DB- 9 adapter ca ble. T o connect t he PC [...]

C-3 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix C Initial Configuration for the Switch Entering the Initial Configuration Information As the swi tch po wers o n, it be gins the POST , which is a serie s of tests that runs automatical ly to ensure that the switch functi ons properly . The POST lasts ap proximately 1 mi[...]

C-4 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix C Initial Configuration for the Switch Enterin g the Initial Conf iguration I nformation Step 4 Ente r th e confi gure t erminal command to enter gl obal configurat ion mode. Switch# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Switch (c[...]

C-5 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 Append ix C Initial Configuration for the Switch Entering the Initial Configuration Information Step 12 V ie w the configura tion tha t you have just crea ted and co nfirm that it is what you want. Switch1# show run ! hostname Switch1 ! banner motd ^C 170 West Tasman Drive, San Jo[...]

C-6 Catalyst 4500 E-Se ries Switches Installatio n Guide OL-13972-02 Appendix C Initial Configuration for the Switch Enterin g the Initial Conf iguration I nformation[...]

IN-1 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 INDEX Numerics 10/100BAS E-T port LED s 5-8 1000BASE -X port a nd statu s LEDs (figu re) 5-8 1000 W p ower su pplies AC power co rds A-4 1300 W p ower su pplies AC power co rds A-8 1400 W p ower su pplies AC power co rds A-13 2800 W AC-input power suppl y LEDs A-25 2800 W p ower [...]

Index IN-2 Catalyst 4500 E-S eries Switche s Installation Gu ide OL-13972-02 chass is dimensio ns 1- 5 fan tray s 1-4 front view 1-2 power suppl ies 1-4 repack ing B-1 supervis or engines 1-3 Catalyst 4506-E switches attach ing cable guide s (figur e) 3-7 chass is dimensio ns 1- 9 fan tray s 1-8 front view 1-6 installing in racks (figure) 3-6 power[...]

Inde x IN-3 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 verify ing operat ion 4-12 dimensio ns Catalyst 45 03-E switche s (table) 1-5 Catalyst 45 06-E switche s (table) 1-9 Cata lys t 450 7R +E sw itc hes (tab le) 1-21 Catalyst 4507R-E switches (table) 1-13 Cata lys t 451 0R +E sw itc hes (tab le) 1-25 Catalyst 4510R-E switches[...]

Index IN-4 Catalyst 4500 E-S eries Switche s Installation Gu ide OL-13972-02 I installati on conn ecting to a p ower sour ce C -2 starting the terminal-emu lation softwar e C-2 installing AC-inp ut power supplie s 4-4 to 4- 7 DC-inp ut power supplie s 4-8 to 4- 13 fan assemblies 4-13 to 4-15 installing switch es in racks 3-4 to ?? L LEDs checki ng [...]

Inde x IN-5 Catalyst 4500 E-S eries Switches Installation Gui de OL-13972-02 S select ing a UPS 2-13 ship ping ins truct ion s B -1 show system command 4-7 signaling an d pinouts terminal setup 3-10 site requir ements altitude 2-5 corr osion 2-6 dust an d contam ination 2-6 EMI 2-6 humidity 2-5 power in terruptions 2-7 shock and vibr ation 2-7 star[...]

Index IN-6 Catalyst 4500 E-S eries Switche s Installation Gu ide OL-13972-02[...]