Cisco MDS 9500 Series manuel d'utilisation

S end documentation comments to mdsfeedbac k-doc@cisco.com Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco MDS 950 0 S eries Hardw are Installation Guide August 2009 Text Part Number: OL -19587-01[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com THE SPECIFICATION S AND INFORMAT ION RE GARDIN G TH E PRODU CTS IN THIS MANU AL A RE SUBJ ECT T O CHAN GE W ITHOUT N OTICE. ALL STATEMENTS , INFORMATION , AND RECOMM ENDATIONS IN THIS MANU AL ARE BELI EVED TO BE A CCURATE BUT A RE PRESENT ED WITHOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com iii Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 CONTENTS New and Changed Information xi Preface xvii Audience xvii Organization xvii Conventi ons xviii Related Documentation xx Release Notes xx Regulatory Compliance and Safety Information xx Compatibility Information xx Ha[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Contents iv Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Port Interfaces 1-18 LEDs on the Supervisor-2 Module 1-19 Supervisor-1 Module s 1-21 Control and Manag ement 1-21 Crossbar Switching Fabr ic 1-22 Processor 1-22 Port Interfaces 1-22 LEDs on the Supervisor-1 Module 1-[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Contents v Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 X2 Transceivers 1-56 Fibre Channel SFP Transceivers 1-57 Combination Fibre Channel/Gig abit Ethernet SFP Transce ivers 1-57 CWDM Combination Fibre Channel/G igabit Ethernet SFP Transce ivers 1-57 Gigabit Ethernet SFP T[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Contents vi Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Maintain in g a Caching Services Module 2-50 Maintain in g the Batteries on the Ca ching Services Module 2-50 Maintainin g the Disk Drives on the Caching Services Mo dule 2-51 Removing and Installing a Power Supply o[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Contents vii Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 CHAPTER 3 Connecting the Cisc o MDS 9500 Seri es 3-1 Preparing for Network Connectio ns 3-2 Connecting to th e Co nsole Port 3-2 Connecting to the COM1 Port 3-4 Connecting to the MGMT 10/100/1000 Ethern et Port 3-6 C[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Contents viii Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Requirements Specific to Perfo rated Cabinets B-3 Perforated Cabinet Requirements for th e Cisco MDS 9513 Chassis B-3 Perforated Cabinet Requirements for th e Cisco MDS 9509 and the Cisco MDS 9506 Chassis B-3 Requi[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Contents ix Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Power Specifications for the Cisco MDS 9506 Director C-14 Specifications for the Cisco MDS 9506 Po wer Supplies C-15 Component Power Requiremen ts and Heat Dis sipation for the Cisco MDS 9506 Director C-16 AC Power Co[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Contents x Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Console Port Pino uts D-2 Connecting the Conso le Po rt to a Computer Using the DB-25 Adapter D-2 Connecting the Conso le Po rt to a Comput er Using the DB-9 Adapter D-3 COM1 Port D-3 COM1 Port Pinouts D-3 Connecting [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xi Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 New and Changed Information The Cisco MDS 9500 Series Har dwar e Installation Guide applies to Cisco MDS NX- OS Release 4.2(1) and earlier Cisco MDS SAN-OS releases. Ta b l e 1 lists the new and changed features av ailable wit[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xii Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 New and Changed Information 24-port 8-Gbps Fibre Channel switching module Added 24-port 8-Gbps Fibre C hannel switching modul e. The switching module of fers 24 autosensing 1 -, 2- , 4- and 8-Gbps Fibre Ch annel ports and ca[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xiii Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 New and Changed Information Cisco MDS 9513 Multilayer Director Added Cisco MDS 9513 Multi layer Director . The chassis consists of 13 horizontal slots, where slots 1 to 6 and slots 9 to 13 are reserved for swi tching, servic[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xiv Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 New and Changed Information Fibre Channel SFP transcei ver Added 4-Gbps Fibre Channel SFP trans - ceiver . 3.0(1) The “F ibre Channel SFP T r ansceiv ers” section on page 1-57 and the “SFP and SFP+ T ranscei ver Specif[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xv Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 New and Changed Information Pow er supplies Added information on Cisco MDS 9509 po wer supp lies. Not rele ase specific The “Installing the Cisco MDS 9509 Director in a Rack” section on page 2-11 . Installation of SFP tran[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xvi Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 New and Changed Information 32-port Fibre Channel module Added 32-port Fibre Channel hot-swappable switch ing module for use with the Cisco MD S 9500 Series. 1.0(2a) The “Switch ing Modules” section on page 1-32 . Cisco [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xvii Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Preface This preface describes the au dience, or ganization, and con ventions of the Cisco MDS 9500 Series H a rd w a re Installat ion Guide . It also prov ides informat ion on ho w to obtain related documentati on. Audience[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xviii Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Preface Conventions This document uses the f ollo wing con ventions for notes, cautio ns, and safety warnings. Notes and Cautions contain important in formation that you should be a ware of. Note Means reader take note . N[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xix Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Preface Attention Ce symbole d'avertissement indique un danger . V ous vous trouvez dans une situation pouvant causer des blessures ou des domm ages corporels. A vant de travailler sur un équipement, soyez conscient des[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xx Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Preface Related Documentation The documentation set for the Cisco MDS 9000 Famil y includes th e follo wing documents. T o find a do cu ment online, use the Cisco MDS NX-OS Documentation Locator at: http://www .cisco.com/en/U[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xxi Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Preface Software Installation and Upgrade • Cisco MDS 9000 NX-OS Releas e 4.1(x) and SAN-OS 3 (x) Softwar e Upgrade and Downgr ade Guide • Cisco MDS 9000 F amily Stor age S ervices Interface Image Install and Upgr ade Gui[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com xxii Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Preface Intelligent Storage Networking Services Configuration Guides • Cisco MDS 9000 I/O Acceler ation Configu ratio n Guide • Cisco MDS 9000 F amily SANT ap Deployment Guide • Cisco MDS 9000 F amily Data Mobility Ma[...]

CH A P T E R S end documentation comments to mdsfeedbac k-doc@cisco.com 1-1 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 1 Product Overview The Cisco MDS 9500 Multilayer Direct or ele v ates th e standard for di rector-c lass swit ches. Providing industry-leading a vailability , scalability , security , and management, the Cisco [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-2 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Chassis • 4/44-port 8-Gb ps Host-Optim ized Fibre Channel swi tching module ( DS-X9248-48K9) • 48-port 4-Gbps Fib re Channel switching m odule (DS-X9148) • 24-port 4-Gbps Fib re Channel switc[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-3 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Chassis Cisco MDS 9513 Director The Cisco MDS 9513 Director is a 13-slot Fib re Channel switch. The front panel con sists of 13 horizontal slots, where slots 1 to 6 and slots 9 to 13 are re serve[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-4 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Chassis Figur e 1 -1 Cisco MDS 9513 Chassis Fr ont Panel V iew The rear of the chassis supports tw o vertical, redundant po wer supplies, two clock modules, tw o vertical, redundant, e xternal cros[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-5 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Chassis Figur e 1 -2 Rear P anel 9513 Chassis 1 Pow er supplies 4 Air vent panels 2 crossbar module fa ns 5 Clock module 1 1. Clock modules are located inside the air vent panel. You must remove [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-6 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Chassis Cisco MDS 9509 Director The Cisco MDS 9509 Director h as a 9-slot ch assis as sho wn in Figure 1-3 , and it sup ports the foll o wing: • Redundant Supervisor -2 modules with associated in[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-7 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Chassis Cisco MDS 9506 Director The Cisco MDS 9506 Director h as a 6-slot ch assis as sho wn in Figure 1-4 , an d it suppor ts the follo wing: • Up to two Superv isor-1 mo dules that pro vide a[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-8 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Backplane and Clock Modules Backplane and Clock Modules The Cisco MDS 9500 Series includes one or more clock modules that a re acc essible from the back of the chassis. The Cisco MDS 9513 and 9509 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-9 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Cisco MDS Fibre Channe l Switch for IBM Blade Center Cisco MDS Fibre Channel Switch for IBM Blade Center The Cisco MDS Fibre Channel Bladeswitch for IBM BladeCenter is designed for IBM BladeCente[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-10 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Power Supplies Cisco MDS 9513 Power Supplies The Cisco MDS 9513 Director suppor ts the 6000-W A C po wer supply (A C input). (See Figure 1-6 .) Figur e 1 -6 Cisco MDS 9513 Po wer Supply 1 Power su[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-11 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Power Supplies Ta b l e 1-2 describes the LEDs for the Cisco MDS 9513 Director power supplies. Ta b l e 1 -2 LEDs f or the Cisco MDS 95 13 Dir ector P ow er Supplies LED Status Description Input[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-12 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Power Supplies Cisco MDS 9509 Power Supplies The Cisco MDS 9509 Director suppor ts the follo wing types of power suppl ies: • 4000-W A C power sup ply (A C input and DC output) The 4000-W A C po[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-13 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Power Supplies Figur e 1 -8 300 0-W AC P ow er Supply for the Cisco MDS 9509 Dire ctor 1 A C power conn ection 4 Power supply LEDs 2 Power cable 5 Capti ve scre ws 3 Power supp ly switch 144986 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-14 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Power Supplies Figur e 1 -9 2500-W AC P ower Supply f or the Cisco MDS 9509 Dir ector Figur e 1 -1 0 2500-W DC Po wer Supply for the Cisco MDS 9509 Dir ector 1 A C power co nnection 4 Capti ve scr[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-15 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Power Supplies Cisco MDS 9506 Power Supplies The Cisco MDS 9506 Director suppor ts the follo wing types of po wer supplies: • 1900-W A C power sup ply (A C input and DC output) • 1900-W DC p[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-16 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Fan Modules Fan Modules The Cisco MDS 9 513 Director has a fron t panel f an tray wi th 15 f ans with an abrupt stop-to-f an rotati on safety featu re after po wer is disconne cted or the f a n tr[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-17 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Supervisor Mo dules Supervisor-2 Modules The Cisco MDS 9 500 Series offers redundant, h ot-swappable, Superviso r-2 modules. (See Figure 1-12 .) Supervisor -2 modules can be used in the Ci sco M[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-18 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Supervisor Modules Control and Management The Supervisor-2 modu les provide the foll owing control and mana gement feat ures: • A redundant central arbiter that provid es traff ic control and ac[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-19 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Supervisor Mo dules • T wo USB ports pro vide a simple interface allo wing you to connect to dif fer ent de vices supported b y Cisco MDS NX-OS. On the double deck er connector , USB port 1 i [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-20 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Supervisor Modules Ta b l e 1 -4 LEDs f or the Cisco MDS 9500 Ser i es Supervisor -2 Modules LED Status Description Status Green All diagnostics pass. Th e module is operation al (normal initializ[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-21 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Supervisor Mo dules Supervisor-1 Modules The Cisco MDS 9509 and 9506 Direct ors support up to t wo Supervisor -1 or Supervisor-2 mo dules that can be installed in slot s 5 and 6 only . The main [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-22 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Supervisor Modules If the kernel service cannot perform a w arm rest art of the process, it issues a cold restart. • A nondisrupti ve sw itchov er from the acti ve superviso r to a redundant sta[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-23 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Supervisor Mo dules Caution Use only the CompactFlash de vices th at are certified for use with Cisco MDS switches and are formatted using Cisco MDS switches. Using Compact Flash de vices that a[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-24 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Supervisor Modules Ta b l e 1 -5 LEDs for the Cisco MDS 9500 Ser ies Supervisor Modules LED Status Description Status Green All diagnostics pass. Th e module is operation al (normal initialization[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-25 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Crossbar Module s Crossbar Modules The Cisco MDS 9513 Di rector supp orts tw o e xternal cro ssbar modules located at the rear of the chassis. Each Supervisor -2 module has an a ssociated e xter[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-26 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Crossbar Modules Ta b l e 1 -6 LEDs for the Cisco MDS 9500 Crossbar Modules LED Status Description Status Green All diagnostics pass. Th e module is operation al (normal initialization sequen ce).[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-27 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Cisco MDS 9000 Series Module Compatibility Cisco MDS 9000 Series Module Compatibility Ta b l e 1-7 lists the hardware modul es av ailable and the chassis compatibili ty associated with them. Ta [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-28 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Port Index Availability Port Index Availability The Cisco MDS 9500 Multilayer Directors are designed to operate wi th any combin ation of Cisco MDS 9000 modules. Ho wev er , you should be aw are o[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-29 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Port Index Availability Example 1-1 sho ws a scenario with a Sup ervisor -1 module, where a 48-port Generation 2 module borro wed port index es from the first slo t. Slot 1 still has 16 port ind[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-30 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Port Index Availability Ta b l e 1-10 show s a valid sample conf iguration for maximum capacity within the port inde x limits. The table lists a mixtur e of Generation 1 and Generati on 2 modules [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-31 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Port Index Availability Using an y combination of modules that include a Generation 1 modu le and a Supervisor-2 module limits the port inde x a vai lability to 252 on all Cisco MDS 9500 Series [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-32 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Switching Modu l es Switching Modules The Cisco MDS 9500 Series supports t he follo wing hot-swap pable Fibre Channel switching m odules: • Generation 3 modules – 48-Port 8-Gbps Fibre Channel [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-33 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Switching Module s 48-Port 8-Gbps Fibre Channel Switching Module The 48-Port 8-Gbps Fibre Channel switching module of fers 48 autosensing 1-, 2-, 4- and 8-Gbps Fibre Channel po rts and can be us[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-34 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Switching Modu l es Figur e 1 -19 4/44-Por t 8- Gbps Host -Optimized Fibr e Channel Switc h ing M odule 48-Port 4-Gbps Fibre Channel Switching Module The 48-port 4-Gbps Fibre Ch annel switching mo[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-35 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Switching Module s 24-Port 4-Gbps Fibre Channel Switching Module The 24-port 4-Gbps Fibre Ch annel switching module of fers 24 autosensing 1-, 2-, and 4-Gbps Fibre Channel ports and can be used [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-36 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Switching Modu l es 4-Port 10-Gbps Fibre Channel Switching Module The 4-port 10-Gbps Fibr e Channel switching modu le of fers four dedicated ban dwidth Fibre Channel ports running at 10 Gbps with [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-37 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Switching Module s LEDs on the Generation 2 Switching Modules Ta b l e 1-13 describes the LEDs for the 48-port, 2 4-port, and 12-port 4-Gb ps Fibre Channel switching modules and the 4- port 10-G[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-38 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Switching Modu l es Ti p For a full 2-Gbps bandwidth between tw o hosts, connect one host to the f irst port group and the second host to the second port g roup. Figur e 1 -25 Cisco MDS 900 0 F am[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-39 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Switching Module s Switching Module Features Each switching module d raws its po wer from the 42 V supplied on the backpl ane with local DC/DC power con verters and regulators. The control proce[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-40 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Switching Modu l es LEDs on the Generation 1 Switching Module Ta b l e 1-14 describes the LEDs for the 16-port and 32- port switching modul es. The Fibre Channel switching modu les provide auto co[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-41 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les Services Modules The Cisco MDS 9500 Series supp orts the follo wing hot-swappable Generation 1 services modules: • 16-Port Storage Services Module, page 1-41 • 18/4-Port Mu[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-42 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Services Modules Figur e 1- 2 7 The SSN-16 module prov ides the follo wing features: • FCIP for remote SAN extension – Simplif ies data protecti on and b usiness continuance strate gies by ena[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-43 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les • Comprehensi ve netw ork security frame work The module supports RADIUS and T ACA CS+, Fibre Channel Security Protocol ( FC-SP), Secure File T ransfer Protocol (SFTP), Secur[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-44 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Services Modules LEDs on the 18/4-Port Multiservice Module Ta b l e 1-15 describes the LEDs for the 18/4-port Mult iservice module. 184706 1 2 4 3 1 Status LED 3 Gigabit Ethernet ports 2 1-Gbps/2-[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-45 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les 14/2-Port Multiprotocol Services Module The 14/2-port Multiprot ocol Services (MPS-14/2) modul e provi des 14 2-Gbps Fibre Channel autosensing ports and tw o 1-Gigabit Ethern e[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-46 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Services Modules Figure 1-29 sho ws an MPS-14/2 module. Figur e 1 -29 Cisco MDS 900 0 Fa mily M PS-14/2 Module LEDs on the MPS-14/2 Module Ta b l e 1-16 describes the LEDs for the MPS-14/2 mo dule[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-47 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les IP Storage Services Modules The 4-port and 8-port I P Storage services ( IPS-4 an d IPS-8) modules provide four o r eight 1-Gigab it Ethernet ports for iSCSI as well as FCIP ov[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-48 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Services Modules Figure 1-31 sho ws the IPS-4 services module. Figur e 1 -31 Cisco MDS 900 0 F amily IPS-4 Services Module LEDs on IP Storag e Services Modules Ta b l e 1-17 describes the LEDs for[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-49 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les 32-Port Fibre Channel Advanced Services Module The Cisco MDS 9000 Fa mily 32-port Fibre Channel Ad v anced Serv ices Module (ASM) enabl es pooling of heterogeneous storage for [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-50 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Services Modules Note Software do wnloads are only necessary wh en a revision of the code is needed. The supervisor module can force a reset on the services module and controls whether po wer is a[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-51 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les 32-Port Fibre Channel Storage Services Module The 32-port Fibre Channel Storage Se rvices Module (SSM) for the Cisco MDS 9000 Family supports up to 32 Fibre Channel ports, pro [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-52 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Services Modules If a single component or a set of components on the swi tching module f ails, this fai lu re will not disable another switching module if that i s the only failure in the system. [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-53 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les Caching Services Module The Caching Services Module (CSM) provides virtua lization services that allo w the Cisco MDS 9000 Family swit ches to reallocate ph ysical resources as[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-54 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Services Modules Figur e 1 -35 CSM, Int er nal View See the “Installing a Switching or Servi ces Module, In cluding Caching Services Modules” section on page 2-45 for information about install[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-55 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Services Modu les LEDs on the Caching Services Module Ta b l e 1-20 describes the LEDs for the CSM. Ta b l e 1 -20 LEDs for the Cisco MDS 90 0 0 F amily CSM LED Status Description Status Green A[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-56 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Supported Tran sceivers Supported Transceivers The follo wing types of transcei vers are av ailable from Cisco and are supported on the Cisco MDS 9 500 Series: • X2 transceiv ers • Fibre Chann[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-57 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 1 Product Ov erview Supported Transce ivers Fibre Channel SFP Transceivers Cisco Fibre Channel SFP transcei v ers are a v ai lable in S WL or L WL versions. Both of these v ersions are 1-Gbps/2-Gbps/4-Gbps capable.[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 1-58 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 1 Product Overview Supported Tran sceivers For more inf ormation about Gigab it Ethernet SFP transceiv er specifications, see the “SFP and SFP+ T ransceive r Specificat ions” section on page C-22 . DWDM Fibre Ch[...]

CH A P T E R S end documentation comments to mdsfeedbac k-doc@cisco.com 2-1 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 2 Installing the Cisco MDS 9500 Series This chapter describes how to install the Cisco MDS 9500 Series chassi s and its compon ents, and includes the foll owing informa tion: • Preinstallation, page 2-2 • I[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-2 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Preinstallation War ni ng Only trained and qualified pe rsonnel should be allowe d to install, replace, or service this equipment. Statement 1030 War ni ng A readily accessible [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-3 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Preinstallation – The telco and EIA Shelf Bracket Kit (optional and purchased separately) in addition t o the rack-mount kit shipped wit h the switch • In a two-post t elc[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-4 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Preinstallation Caution A void UPS types that use fer roresonant techno logy . These UPS types can become uns table with systems such as the Cisco MDS 9000 Famil y , which can h[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-5 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Preinstallation Required Equipment Gather the follo wing items before beginnin g the installation: • Number 1 and number 2 Philli ps scre wdri ve rs with torque capabili ty [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-6 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Installing the Chassis in a Cabinet or Rack Ti p Keep the shippi ng container for use when mo ving or shipping the chassis in the future. Th e shipping carton can be flattened a[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-7 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Installing the Cha ssis in a Cabinet or Rack Note Y ou can remov e the modules and other f ield-replaceable components to mak e moving and positioning the chassis easier and s[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-8 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Installing the Chassis in a Cabinet or Rack Note If you are using the cable management bracket shipped with the switch, do not install the top four scre ws into the front righ t[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-9 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Installing the Cha ssis in a Cabinet or Rack Figur e 2-2 P ositioning th e Support Bars Step 4 Once the support bars are installed, secure the rack-mount support bracke ts to [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-10 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Installing the Chassis in a Cabinet or Rack Figur e 2-3 Secur ing the Rac k-Mount Support Br a ck ets Step 5 Position a person at each side of the ch assis and one at the mecha[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-11 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Installing the Cha ssis in a Cabinet or Rack Figur e 2-4 Installing the Cable Management Br ack ets on the MDS 9513 Chassis Installing the Cisco MDS 9509 Director in a Rack C[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-12 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Installing the Chassis in a Cabinet or Rack Note The rack-mount kit for the Cisco MDS 9509 Director includes side rack-mount brackets, which are required for the duration of th[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-13 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Installing the Cha ssis in a Cabinet or Rack Figur e 2-5 Installing the Side Rack-Mount Br ack ets for the Cisco MDS 9509 Chassis Step 3 Attach the crossbar to th e back of t[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-14 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Installing the Chassis in a Cabinet or Rack Figur e 2-7 Installing the Cisco MDS 9509 Chassis in the Rack Step 5 If you are installing the optional cable management brack et, p[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-15 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Installing the Cha ssis in a Cabinet or Rack Figur e 2-8 Installing the Cable Management Br ack et on the MDS 9509 Chassis Installing the Cisco MDS 9506 Director in a Rack Ta[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-16 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Installing the Chassis in a Cabinet or Rack Figure 2-9 sho ws the install ation of a Cisco MD S 9506 director into a rack , using the cable management bracket. Figur e 2-9 Inst[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-17 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series System Grounding T o install the Cisco MDS 9506 chassis in the rack using the rack-mount kit, follow these steps: Step 1 Place all the parts and screwdriv e rs near the ra ck[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-18 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series System Grounding Ta b l e 2-4 Gr ounding Bes t Pr actices Environment Electromagnetic Noise Severity Level Grounding Recommendations Commercial b uilding is subjected to direct[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-19 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series System Grounding Note In all situations, groundi ng practices must comply wit h local National Electric Code (NEC) requirements or local laws and regulations. Note Always ens[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-20 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series System Grounding Step 2 Grasp the spring or alligat or clip on th e ESD wrist str ap and momentaril y touch the clip to a bare metal spot (unpainted surface) on the rack . Cisc[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-21 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series System Grounding Figur e 2-1 0 Attac hing the ESD Wr ist Strap t o the S ystem Gr ound Lug Screw c. In addition, follo w these guidelines when handling m odules: – Handle c[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-22 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series System Grounding – Nev er attempt to remove the printed ci rcuit board from the metal carrier . Caution For safety reasons, check the resistance va lue of the anti static st [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-23 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Grounding the Chassis • Grounding wire—Not su pplied as part of accessory kit. The gro unding wire should b e sized according to local and national inst allation requir e[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-24 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Grounding the Chass is Figur e 2-1 1 Syst em Ground Location on the Cisco MDS 9513 Chassis (Front) Figure 2-12 sho ws the ESD ground location on the rear panel of t he Cisco MD[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-25 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Grounding the Chassis Figur e 2-12 ESD Gr ound Location on th e Cisco MDS 9513 Chassis (Rear) Caution All po wer supplies must be grounded. The receptacles of the A C p o wer[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-26 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Grounding the Chass is Figur e 2-13 Syst e m Ground Location on the Cisco MDS 9509 Chassis Caution Grounding the chassis is required for Cisco MDS 9506 Direct ors that have DC [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-27 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Grounding the Chassis Figur e 2-14 Syst e m Ground Location on the Cisco MDS 9506 Chassis T o attach the grounding lug and cable to the chassis, follo w these steps: Step 1 L[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-28 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Starting Up the Switch Starting Up the Switch This section pro v ides the follo wing informatio n: • Connecting the Po wer Supplies, page 2-28 • Po wering Up the Switch an [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-29 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Starting Up the Switch Providing Power to an AC Power Supply for the Cisco MDS 9513 Director T o provide po wer to an A C po wer supply in a Cisco MDS 9513 Director , follow [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-30 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Starting Up the Switch Providing Power to an AC Power Supply for the Cisco MDS 9509 and Cisco MDS 9506 Directors The basic procedure f or pro viding po wer to an A C po wer sup[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-31 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Starting Up the Switch Figur e 2-1 7 400 0-W AC P ow er Supply for the Cisco MDS 9509 Direct or Caution The follo wing appli es to A C power suppli es on the Cisco MDS 9506 o[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-32 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Starting Up the Switch Figure 2-19 sho ws a power supply f or a Cisco MDS 9506 Director . The po wer supply has no po wer connector . The power connector is provid ed on the PE[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-33 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Starting Up the Switch Providing Power to a DC Power Suppl y in the Cisco MDS 9509 Director War ni n g Before performing any of the fo llowing procedures, ensu re that power [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-34 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Starting Up the Switch Step 2 Ensure that the system (earth) gr ound connection is made. See the “System Groundin g” section on page 2-17 . Step 3 T urn the po wer switch o[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-35 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Starting Up the Switch War ni n g When installing or replacing th e unit, the ground conn ection must alway s be made first and disconnected last. Statement 1046 For more inf[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-36 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Starting Up the Switch b. Strip the cable ends to allo w for metal-to-metal cont act. Insert each cab le into a se parate ring lu g, and crimp the lugs around the cables. c. In[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-37 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Starting Up the Switch T o po wer up the switch and v erify hardw are operation, fol lo w these steps: Step 1 V erify that the faceplates of all modules are flu sh with the f[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-38 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing, Installing, and Verifying Supervisor, Switching, an d Se rvic es Modules Note If you purchased this pr odu ct throu gh a Ci sco rese ller, contact the reseller direct[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-39 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing, Installing, and Verifying Su pervisor, Sw itch ing, and Se rvic es Module s Caution T o prev ent ESD damage, wear grounding wrist straps during these procedures and[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-40 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing, Installing, and Verifying Supervisor, Switching, an d Se rvic es Modules Installing Supervisor Modules In a Cisco MDS 9513 Director , slots 7 and 8 are reserved for t[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-41 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing, Installing, and Verifying Su pervisor, Sw itch ing, and Se rvic es Module s Figur e 2-22 P o sit ioning a Modu le in the Chassis Step 6 Position the module in the c[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-42 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing, Installing, and Verifying Supervisor, Switching, an d Se rvic es Modules Figur e 2-23 Clear ing the EMI Gask et b. Grasp the two ejecto r lev ers using the thumb an d[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-43 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing, Installing, and Verifying Su pervisor, Sw itch ing, and Se rvic es Module s Figur e 2-24 Closing the Ejector Lev ers Caution Do not press do wn too forcefully on th[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-44 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing, Installing, and Verifying Supervisor, Switching, an d Se rvic es Modules Removing a Caching Services Module Note A minimum of two CSMs in each f abric are required fo[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-45 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing, Installing, and Verifying Su pervisor, Sw itch ing, and Se rvic es Module s Removing Other Switching and Services Modules T o remove a switching or services modu le[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-46 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing, Installing, and Verifying Supervisor, Switching, an d Se rvic es Modules Step 5 If a filler panel i s installed, remo ve the tw o Philli ps pan-head scre ws from the [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-47 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing, Installing, and Verifying Su pervisor, Sw itch ing, and Se rvic es Module s Step 4 T u rn on the po wer supply switches to po wer up the system and check the LEDs o[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-48 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing, Installing, and Verifying Supervisor, Switching, an d Se rvic es Modules Figur e 2-25 Captive Scr ews and Ejector Lev ers on the Cr ossb ar Mo du le Step 4 Place the [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-49 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing, Installing, and Verifying Su pervisor, Sw itch ing, and Se rvic es Module s Step 2 Open both the ejector levers on th e ne w or replacement module completely . Step[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-50 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Maintaining a Ca ching Services Mo dule Note Ensure the ejector levers are co mpletely closed before tightening the capti ve scre ws. Failure to completely seat the module in t[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-51 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM The batteries are also automatica lly reconditioned on a periodic basis, one batte ry at a time. During reconditioning all po [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-52 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM Removing and Installing the Power Supplies on the Cisco MDS 9513 Director The Cisco MDS 9513 po wer supplies are located at the r[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-53 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM Caution Use both hands to install and remo ve pow er supplies. Each po wer supply weighs 34.2 lbs (1 5.5 kg). Step 5 Grasp th [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-54 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM Caution T o av oid damage to the panel fasteners, do not place the po wer supply do wn on the perforated ends. Place the po wer s[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-55 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM Figur e 2-29 AC P ow er Supply for the Cisco MDS 9513 Dir ector Step 4 Grasp the p ower supply hand les, o ne w ith each ha nd[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-56 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM See Ta b l e 1-2 on page 1-11 for po wer supply LED details. Removing an AC Power Supply from the Cisco MDS 9509 Director The pro[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-57 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM Figur e 2-30 Handling a P ower Supp ly f o r the Cisco MDS 9509 Direct or Installing an AC Power Supply in the Cisco MDS 9509 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-58 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM Step 3 Ensure that the power swi tch is in the of f (0) position on the p ower su pply you are installing. See Figure 2-33 and Fi[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-59 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM Figur e 2-32 300 0-W AC P o wer Supply f or the Cisco MDS 9509 Direct or 1 A C power conn ection 4 Power supply LEDs 2 Power c[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-60 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM Figur e 2-33 2500-W AC P o wer Supply f or the Cisco MDS 9509 Direct or Step 4 Grasp the po wer supply handle with one h and, pla[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-61 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM Removing a DC Power Supply from the Cisco MDS 9509 Director The DC po wer supply for the Cisco MDS 9 509 Director is 250 0 W .[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-62 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM Figur e 2-34 Fr ont Panel f or the DC Po wer Su pply of the Cisco MDS 9509 Direct or Caution Use both hands to instal l and remov[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-63 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM Step 2 Ensure that the system (earth) ground connection has been made. See the “System Gr ounding” section on page 2-17 . [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-64 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM Removing and Installing the PEMs on the Cisco MDS 9506 Director Note For instructions on conn ecting th e cables to the PEMs, see[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-65 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM Figur e 2-35 Connecting or Discon necting the DC PEM Step 4 If the PEM bay is to remain empty , install a PEM filler panel o v[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-66 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing a Po wer Supply or PEM Installing an AC PEM T o install an A C PEM in a Cisco MDS 9506 chassis, follow these steps: Step 1 Ensure that the system (earth[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-67 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing an d Installing a Power Su pply or PEM • OUTPUT F AIL LED is off. Removing an AC or DC Power Supply from the Cisco MDS 9506 Director The procedure for remo ving a [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-68 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing Fan Modules Step 1 Ensure that the system (earth) ground connection has been made. See the “System Groundin g” section on page 2-17 . Step 2 If a fi[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-69 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and In stalling Fan Mod ules Caution The Cisco MDS 9000 Famil y switches ha ve inte rnal temperature sensors that are cap able of shutting do wn the system if the te[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-70 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing Fan Modules Figur e 2-37 Removing the F an Module for the Cisco MDS 9513 Dir ector War ni ng When removing the fan tray , keep your hands and fingers aw[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-71 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and In stalling Fan Mod ules Note If you purchased this pr odu ct throu gh a Ci sco rese ller, contact the reseller directly for technical support. If you purch ased[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-72 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing Fan Modules Figur e 2-38 Removing a Cr ossbar Module F an T ray Installing the Crossbar Module Fan Tray T o install a crossbar module fan tray , follow [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-73 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and In stalling Fan Mod ules Removing a Front Fan Module on the Cisco MDS 9509 Director T o remov e a fan module from th e Cisco MDS 9509 or 9506 switch, fo llo w th[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-74 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installing Fan Modules Step 3 Tighten the capti ve screws to 8 in-lb . Step 4 If the switch is po wered on, listen for the f ans; you shoul d immediately hear them[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-75 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and Installing Comp actFlash Card s Note If you purchased this pr odu ct throu gh a Ci sco rese ller, contact the reseller directly for technical support. If you pur[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-76 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installi ng Cl oc k M o dules Installing a CompactFlash Card T o install a CompactFlash card, follow these steps: Step 1 Position the CompactFlash card with the co[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-77 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and Installing Clock Modules Removing a Clock Module from the Cisco MDS 9513 Director Clock modules are connected to the re ar of the Cisco MDS 9513 Director and are[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-78 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installi ng Cl oc k M o dules Note Note the position and orientation of the clock module before y ou remov e it from the direct or chassis because you must in stal[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-79 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and Installing Clock Modules Installing a Clock Module into the Cisco MDS 9513 Director Caution Always wear an ESD wrist strap when handling mod ules or coming into [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-80 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installi ng Cl oc k M o dules • OUTPUT F AIL LED is off. Removing a Clock Module from the Cisco MDS 9509 Director Before installing the clock modu le, check the [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-81 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and Installing Clock Modules Figur e 2-43 Clock Module Location on the Cisco MDS 9509 Dir ector (Rear View) Caution Always wear an ESD wrist strap when handling mod [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-82 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installi ng Cl oc k M o dules Step 3 Remove th e four scre ws that secure th e clock module to the backplane. (See Figure 2-44 .) Figur e 2-44 Clock Module Replace[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-83 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and Installing Clock Modules Installing a Clock Module into the Cisco MDS 9509 Director Caution Always wear an ESD wrist strap when handling mod ules or coming into [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-84 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installi ng Cl oc k M o dules These tools are required to rem ov e and install a clock modu le: • Number 1 Phillips scre wdri ver • Y our o wn ESD-pre venti on[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-85 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 2 Installin g the Cisco MDS 9500 Series Removing and Installing Clock Modules T o remov e the clock module, follo w these steps: Step 1 Remove po wer from both PEMs, accessed fro m the front of the chassis as follo[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 2-86 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 2 Installing the Cisco MDS 9500 Series Removing and Installi ng Cl oc k M o dules Installing a Clock Module into the Cisco MDS 9506 Director Caution Always wear an ESD wrist strap when handling modules or comin g in[...]

CH A P T E R S end documentation comments to mdsfeedbac k-doc@cisco.com 3-1 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 3 Connecting the Cisco MDS 9500 Series The Cisco MDS 9500 Series pro vides the following typ es of ports: • Console port (supervisor modules) —An RS-232 port that you can use to create a local management co[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-2 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Preparin g for Network Connections Caution When running po wer and data cables in ov erhead or subfl oor cable trays, we strong ly recommend that po wer cables and other poten [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-3 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 3 Connecting the Cisco MDS 9500 Series Connecting to the Console Port Figur e 3-1 Connecting to the Console Por t on the Supervisor Module for the Cisco MDS 9500 Ser i es Note Connecting the console port to a modem [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-4 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Connecting to the COM1 Port T o connect the console port to a computer terminal , follo w these steps: Step 1 Configure the terminal emul ator program to matc h the follo wing [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-5 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 3 Connecting the Cisco MDS 9500 Series Connecting to the COM1 Port Figur e 3-2 Connecting t o the COM1 P ort on the Supervisor Module f or the Cisco MDS 9500 Ser i es T o connect the COM1 port to a modem, follo w th[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-6 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Connecting to the MGMT 10/100/1000 Ethernet Port Step 2 If the default settings for th e COM1 are modified, see the Cisco MDS 9000 F amily NX-OS Fundamentals Confi gur ation Gu[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-7 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 3 Connecting the Cisco MDS 9500 Series Connecting to the M GM T 10/100 Ethernet Port T o connect the MGMT 10/1 00/1000 Ethernet port to an external hub, switch, or router , follow these steps: Step 1 Connect the app[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-8 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Connecting to the MGMT 10/100 Ethern et Port Figur e 3-4 Connecting t o the MGMT 1 0/1 0 0 Ether net Por t on the Supervisor -1 Module for the Cisco MDS 9500 Series T o connect[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-9 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 3 Connecting the Cisco MDS 9500 Series Connecting to a Fibre Channel Port Connecting to a Fibre Channel Port The Fibre Channel ports on the switching module s are compatible with LC-type f iber-optic SFP transceiv e[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-10 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Connecting to a Fibre Ch an nel Port The Cisco MDS 9000 Famil y supports X2 transcei vers with SC connectors. (See Figure 3-5 .) Figur e 3-5 Cisco MDS 900 0 F amily X2 T ransc[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-11 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 3 Connecting the Cisco MDS 9500 Series Connecting to a Fibre Channel Port Removing an X2 Transceiver T o remov e an X2 transcei ver , follow these steps: Step 1 Attach an ESD-prev enti ve wrist strap and follo w it[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-12 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Connecting to a Fibre Ch an nel Port Removing and Installing SFP Transceivers Caution Removing and installing an SFP t ranscei ver can shorten its useful li fe. Do not remov e[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-13 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 3 Connecting the Cisco MDS 9500 Series Connecting to a Fibre Channel Port c. Insert a dust plug into the cable end of the transceiver . Caution If the transcei ver does not remo ve easily in the ne xt step, push th[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-14 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Connecting to a Fibre Ch an nel Port Installing an SFP Transceiver T o install an SFP transcei ver , follow these steps: Step 1 Attach an ESD-prev enti ve wrist strap and foll[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-15 Cisco MDS 9500 Series Hard ware Installati on Guide OL-19587-01 Chapter 3 Connecting the Cisco MDS 9500 Series Connecting to a Fibre Channel Port Step 2 Press the rele ase latch on the cable, gras p the connect or near the connection point, and gen tly pull the connector from the trans[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com 3-16 Cisco MDS 9500 Series Hard ware Installation Guide OL-19587-01 Chapter 3 Connecti ng the Cisco MDS 9500 Series Connecting to a Fibre Ch an nel Port Maintaining SFP Transceivers and Fiber-Optic Cables SFP transcei vers and fiber -optic cables must be kept cl ean and dust-free to maintai[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-1 Cisco MDS 9500 Series Hardwa re Installation Guide OL-19587-01 APPENDIX A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules This appendix describes th e tasks associated with read ying the MDS 9500 Series to support Generat ion 3 8-Gbps Fibre Channel switchi ng modules. I[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-2 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Usage Guide lines The MDS 9509 Director and the MD S 9506 Director also support the Gen eration 3 8-Gbps modules. The switches require Supervisor -2 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-3 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channe l Switching Modules Before You Begin Up grading the MDS 9513 Director Before You Begin Upgrading the MDS 9513 Director The sections that fol low present t hree procedur[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-4 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Migrati on Procedures for the MDS 9513 Dir ector Step 2 V erify that the MDS 9513 Director i s runn ing Ci sco SAN-O S Release 3.x b y entering the s[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-5 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channe l Switching Modules Migration Procedures for the MDS 9513 Director Reason: Reset triggered due to Switchover Request by User System version: 4.2(1) Service: Step 5 Inst[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-6 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Migrati on Procedures for the MDS 9513 Dir ector switch# show module Mod Ports Module-Type Model Status --- ----- -------------------------------- --[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-7 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channe l Switching Modules Migration Procedures for the MDS 9513 Director Figur e A -1 Captive Scr ews and Ejector Lev ers on the Fabr ic Module Step 9 Place the MDS 9513 Fabr[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-8 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Migrati on Procedures for the MDS 9513 Dir ector Figur e A -2 Insta lling a Fabr ic Modu le c. Grasp the two ejecto r lev ers using the thumb an d fo[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-9 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channe l Switching Modules Migration Procedures for the MDS 9513 Director Step 14 Move t he console cable to the co nsole port on the act iv e supervisor . Step 15 Enter the s[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-10 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Migrati on Procedures for the MDS 9513 Dir ector Acti v ating the high er bandwidth capabili ties of the MDS 9513 F abric 2 modul es can occur in on[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-11 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channe l Switching Modules Migration Procedures for the MDS 9513 Director The follo wing example sho ws the output of the show hardware fabric-mode command, which indicates t[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-12 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Migration Procedure for the MD S 9509 Director and MDS 9506 Director Step 8 Enter the show hardwar e fabric-mode command to ve rify that increased b[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-13 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channe l Switching Modules Migration Procedure for the MDS 9509 Director and MDS 9506 Director Step 4 If the switch has Supervisor- 1 modules installed, re mov e the modu les[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com A-14 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules Migration Procedure for the MD S 9509 Director and MDS 9506 Director[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-1 Cisco MDS 9500 Series Hardwa re Installation Guide OL-19587-01 APPENDIX B Cabinet and Rack Installation This appendix pro vides information on the cabinet and rack inst allation and includes th e follo wing sections: • Cabinet and Rack Requ irements, page B-1 • Cisco MDS 9000 Famil [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-2 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cabinet and Ra ck Requirements Cabinet and Rack Requirements fo r the Cisco MDS 9513 Chassis The cabinet or rack must also meet the following requirements for the Cisco MD S 9513 chass[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-3 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cabinet and Rack Requirements Requirements Specific to Perforated Cabinets A perforate d cabinet is defined here as a cabin et with perforated front and rear doors and solid side w a l[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-4 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cabinet and Ra ck Requirements A perfora ted cabi net that conforms to thes e re quirements is av ailable from Rittal Corporat ion: Rittal Corporation One Rittal Place Springf ield, OH[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-5 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cabinet and Rack Requirements • A recommended cabinet depth of 36 to 42 inches (9 1. 4 to 106.7 cm) to allo w the doors to close and adequate airflow . • Bottom of cabinet should b[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-6 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket • The horizontal distance between the cha ssis and any adjacent chassis should be 6 inches (15.2 cm), and the distance between the c[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-7 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket Rack-Mounting Guidelines Caution If the rack is on wheels, ensure tha t the brakes are engaged or the rack is otherwise stabilized. Ca[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-8 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket Before Installing the Shelf Brackets Before installing the shelf brack ets, check the conten ts of your kit. Ta b l e B-2 lists the co[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-9 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket Installing the Shelf Bracket Kit into a Two-Post Telco Rack Figure B-1 sho ws the installati on of the shelf brack et kit into a tw o-[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-10 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket Installing the Shelf Bracket Kit into a Four-Post EIA Rack Figure B-2 sho ws the installation of the shelf brack et kit into a four -[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-11 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket Step 4 Attach the crossbar to the shelf brackets as shown in Figure B-2 , using the 10-32 scre ws. Step 5 Insert the slider rails int[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-12 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9000 Family Telco and EIA Shelf Bracket Installing the Switch on the Shelf Brackets This section pro v ides general instructions for i nstalling the switch on t op of the sh[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-13 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9500 Shelf Bracke t Step 3 Remove the scre ws fastening the sh elf brack ets to the front rack-mounti ng rail s. Th en re m ove the shelf brackets fr om the rack. Note This [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-14 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9500 Shelf Bracket Rack-Mounting Guidelines Caution If the rack is on wheels, ensure tha t the brakes are engaged or the rack is otherwise stabilized. Before rack-mounting t[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-15 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9500 Shelf Bracke t Installing the Cisco MDS 9500 Shelf Bracket Kit into a Cabinet or Rack Figure B-3 sho ws the installation of the Cisco MDS 9500 Shel f Bracket Ki t into [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com B-16 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix B Cabinet and Rack Installation Cisco MDS 9500 Shelf Bracket Installing the Switch on the Shelf Brackets This section pro vides general inst ructions for installi ng the Cisco MDS 9509 Director on top of the shelf b[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-1 Cisco MDS 9500 Series Hardwa re Installation Guide OL-19587-01 APPENDIX C Technical Specifications This appendix provides technical specif ica tions and includes the following sections: • Switch Specifications, page C-1 • Module Specif ications, page C-4 • Po wer Specif ications f[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-2 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Switch Specifications Ta b l e C-2 lists the physical specif ication s for the Cisco MDS 9513 D irector . Ta b l e C-3 lists the physical specif ication s for the Cisco MDS 9509 D irecto[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-3 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Switch Specifications Ta b l e C-4 lists the physical specif ication s for the Cisco MDS 95 06 Director . Pow er supply 4000-W , A C input 3000-W , A C input 2500-W , A C input 2500-W , DC[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-4 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Module Specifications Module Specifications Ta b l e C-5 lists the specif ications for the Cisco MDS 9500 Series su pervisor modu les, services modules, and switching modules. Power supp[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-5 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Module Specifications Weight of Modules Ta b l e C-6 lists the weight for each module in the Cisco MDS 9000 Family . Dimensions 1.75 x15.5 x16.5 in . (4.4 x 39.4 x 41.9 cm) Note These are [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-6 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Power Specifications fo r the Cisco MDS 9513 Director Ta b l e C-7 lists the specif ications for the batteries on t he Cisco MDS 9000 F amily caching serv ices module. Note The CSM does [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-7 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Power Specifications for the Cisco MDS 9513 Director • T wo A C power connection @ 220 V A C = 6000 W output If a 110 V A C input is chosen, a 110-V A C power cord (CAB-7513A C=) must be[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-8 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Power Specifications fo r the Cisco MDS 9513 Director AC Power Consumption for the Cisco MDS 9513 Director Ta b l e C-10 shows t he typical A C power consum ption for a Cisco MD S 9513 D[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-9 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Power Specifications for the Cisco MDS 9509 Director Power Specifications for the Cisco MDS 9509 Director This section includes the following topics: • Specif ications for the Cisco MDS [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-10 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Power Specifications fo r the Cisco MDS 9509 Director Current rating 16 A maximum at 100 to 12 0 V A C and 1300-W o utput. 16 A maximum at 200 to 24 0 V A C and 2500-W o utput. Note For[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-11 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Power Specifications for the Cisco MDS 9509 Director Component Power Requirements and Heat Dissipation for the Cisco MDS 9509 Director When sizing the air-conditioning re quirem ents for [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-12 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Power Specifications fo r the Cisco MDS 9509 Director 16-port 1-Gbps/2 -Gbps Fibre Channel module, DS-X9016 3.x 210 897 2.92 2.19 1.46 1.09 2.x and 1.x 220 940 3.05 2.29 1.53 1.15 18/4 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-13 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Power Specifications for the Cisco MDS 9509 Director Ta b l e C-13 P o wer Requir ements and Heat Dissip ation f or the 250 0-W DC Po wer Supply Module T ype/ Product Number SAN-OS Releas[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-14 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Power Specifications fo r the Cisco MDS 9506 Director AC Power Consumption for the Cisco MDS 9509 Director Ta b l e C-14 shows t he typical A C power consum ption for the Cisco MDS 9509[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-15 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Power Specifications for the Cisco MDS 9506 Director Specifications for the Cisco MDS 9506 Power Supplies Caution The follo wing appli es to A C power suppli es on the Cisco MDS 9506 only[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-16 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Power Specifications fo r the Cisco MDS 9506 Director Component Power Requirements and Heat Dissipation for the Cisco MDS 9506 Director When sizing the air-conditioning re quirements fo[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-17 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications Power Specifications for the Cisco MDS 9506 Director 16-port 1-Gbps/2- Gbps Fibre Channel module DS-X9016 3.x 210 897 2.92 2.19 1.46 1.09 2.x and 1.x 220 940 3.05 2.29 1.53 1.15 18/4 Mult[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-18 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns Power Specifications fo r the Cisco MDS 9506 Director Ta b l e C-17 P o wer Requirements and Heat Dissipa tion for the 1 90 0-W DC P ow er Supply Module T ype/ Product Number SAN-OS Rel[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-19 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications X2 Transceiver Spe cifications AC Power Consumption for the Cisco MDS 9506 Director Ta b l e C-18 sho ws the typical A C po wer consumption f or the Cisco MD S 9506 Director . X2 Transcei[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-20 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns X2 Transc eiver Specifications Cisco 10-Gbps Fibre C hannel X2 Transceivers Ta b l e C-19 lists the Cisco 10-Gbps Fibre Channel X2 transcei vers. General Specification for Cisco 10-G bp[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-21 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications X2 Transceiver Spe cifications Note Because DS-X2-FC10G-CX4 is not an optical modu le, it is not listed in Ta b l e C-21 . Ta b l e C-22 provides the environmental spec ifications for th [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-22 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications Environmental and Power Requirement s Specifications for Cisco 10-G bps Ethernet X2 Transceiver Ta b l e C-25 provides t he po wer requirement [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-23 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications SFP and SFP+ Tran sceiver Specifications Use only Cisco SFP transceiv ers on the Cisco MDS 9 500 Seri es. Each Cisco SFP transcei v er is encoded with model information that enable s the [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-24 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications General Specifications for Cisco 8- Gbps Fibre Channel SFP+ Transceivers Ta b l e C-28 provides the general specif ications fo r Cisco Fibre Ch[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-25 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications SFP and SFP+ Tran sceiver Specifications Ta b l e C-30 provid es the en vironment specifi cation for the Cisco 8-G bps Fibre Channel SFP+ transceivers. For information about safety , regu[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-26 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications General Specifications for Cisco 4- Gbps Fibre Channel SFP Transceivers Ta b l e C-31 provides the general specif ications fo r Cisco Fibre Cha[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-27 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications SFP and SFP+ Tran sceiver Specifications Ta b l e C-33 provides the en vironment specification for th e Cisco 4-Gbps Fibre Ch annel SFP transcei vers. For information about safety , regul[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-28 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications Ta b l e C-36 provides the en vironmental specifi cation fo r Cisco 2-Gbps Fibre Channel SFP transcei vers. For information about safety , regu[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-29 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications SFP and SFP+ Tran sceiver Specifications General Specifications for Cisco Fibre Channel and Gigab it Ethernet SFP Transceivers Ta b l e C-39 provi des general specification for Cisco Fibr[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-30 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications Ta b l e C-41 provides the en vironmental specif i cation for Cisco Fibre Channel and Gigabi t Ethernet SFP transceivers. For information about[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-31 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications SFP and SFP+ Tran sceiver Specifications Ta b l e C-43 lists the Cisco 4-Gbps CWDM SFP tr anscei vers av ailable through Cisco. Environmental and Optical Specifications fo r Cisco 2-Gbps [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-32 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications Ta b l e C-45 provides the optical specif ications for the Cisco 2 -Gbps CW DM SFP transce iv ers. Note • Parameters are specified ov er temp[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-33 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications SFP and SFP+ Tran sceiver Specifications Environmental and Optical Specifications fo r Cisco 4-Gbps CWDM SFP Transceivers Ta b l e C-46 provides t he en vironmental specifications for the[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-34 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications • When interoperating a Cisco 4-Gbps CWDM SFP transcei ver wi th a Cisco 1/2-Gbps CWDM transcei ver , the speed of ports on the Cisco 4-Gbps [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-35 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Technical Spec ifications SFP and SFP+ Tran sceiver Specifications Cisco DWDM SFP Transceivers The Cisco 2-Gbps D WDM SFP modules enable enterp rises and service provider s to pro vide scalable, easy-to-deplo y D [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com C-36 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix C Tec hnical Specific atio ns SFP and SFP+ T ransceiver Spec ifications[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-1 Cisco MDS 9500 Series Hardwa re Installation Guide OL-19587-01 APPENDIX D Cable and Port Specifications This appendix provides the cabl e and port specifications, and includes the follo wing sections: • Cables and Adapters Provided, page D-1 • Console Port, page D-2 • COM1 Port, p[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-2 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations Console Port Console Port The console port is an asynchronous RS-232 serial port with an RJ-4 5 connector . Y ou can use the RJ-45 rollov er cable and the R J-45/DSUB F/F adapter or [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-3 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable and Po rt Specification s COM1 Port Connecting the Console Port to a Computer Using the DB-9 Adapter Y ou can use the RJ-45 rollover cable and DB-9F/RJ-4 5F PC terminal (labeled “T erminal”) to connect th[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-4 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations MGMT 10/100/1000 Ethernet Port Connecting the COM1 Port to a Modem Y ou can use the DB-9F/RJ -45F PC termin al (label ed “T erminal”) to connect to the COM1 port , and the RJ-45/[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-5 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable and Po rt Specification s MGMT 10/100/1000 Ethernet Port Ta b l e D-6 lists the connector pinouts and sign al name s for a 10/10 0/1000B ASE-T management port (MDI) cable. Note The RJ-45 interface only uses p[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-6 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations MGMT 10/100 Ethernet Port MGMT 10/100 Ethernet Port The MGMT 10/100 Ethernet po rt is an Ethernet port wi th an RJ-45 connector . Y ou can use a modular , RJ-45, straight-through U T[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-7 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable and Po rt Specification s Supported Power Cords a nd Plugs Figure D-4 sho w s a schematic of the 10/100B A SE-T cable required to connect the management port to a switch or hub (not pr ovided with the switch)[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-8 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations Supported Po wer Cords an d Plugs Pow er Cord, 250V A C 16A Europe, Src Plug CEE 7/7 13.65 4 Power Cord, 250V A C 16A Intern ational, Sr c Plug IEC 309 13.58 4.14 Pow er Co rd, 250V [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-9 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable and Po rt Specification s Supported Power Cords a nd Plugs Supported Plugs for 6000-W AC, 2500-W AC, and 1900 -W AC Power Supplies Figure D-5 sho w s the supported plugs for th e 6000-W A C, 3000-W A C, 2500-[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-10 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations Supported Po wer Cords an d Plugs Figure D-6 sho w s an additional plug that is suppo rted for the 1900-W A C power supp ly only . Figur e D-6 Add itional P owe r Supply Plug Suppor[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-11 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable and Po rt Specification s Supported Power Cords a nd Plugs Supported Plugs for the 40 00-W AC Power Supply Figure D-8 sho w s the supported plugs for the 4 000-W A C power supply . The power cable on th e 40[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-12 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations Supported Po wer Cords an d Plugs Power Supply AC Power Cords Ta b l e D-9 lists the specifications for the 6000 W A C po wer cords that are av ai lable for the AC-input po wer supp[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-13 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable and Po rt Specification s Supported Power Cords a nd Plugs AC Power Cord Illustrations This section contai ns the A C po wer cord illustrations . An A C power cord can be used with sev eral power supplies. S[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-14 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations Supported Po wer Cords an d Plugs Figur e D-12 CAB-9K16A -A US Figur e D-13 CAB-9K16A -CH Figur e D-14 CAB-9K16A -SW Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 140586 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-15 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable and Po rt Specification s Supported Power Cords a nd Plugs Figur e D-15 CAB-9K16A -EU Figur e D-16 CAB-C1 9-CBN Connector : IEC 60320 C15 Cordset rating: 16 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: CEE 7/7 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com D-16 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix D Cable a nd Port Specific ations Supported Po wer Cords an d Plugs[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-1 Cisco MDS 9500 Series Hardwa re Installation Guide OL-19587-01 APPENDIX E Site Planning and Maintenance Records This appendix pro vides a Site Plan ning list and incl udes the follo wing records to use when installing t he Cisco MDS 9500 Series: • Contacting Customer Service, p age E-[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-2 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix E Site Plann ing and Maintenanc e Reco rds Contacting Customer Service Finding the Chassis Serial Number Ti p If you have CLI access, enter the show spr om backplane 1 command to display the backplan e contents, incl[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-3 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix E Site Planning an d Maintenance Records Contacting Customer Service Figur e E-2 Serial Number Location on Cisco MDS 9509 Dir ector The Cisco MDS 9506 Director chassis serial number label is shown i n Figure E-3 . Fi[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-4 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix E Site Plann ing and Maintenanc e Reco rds Site Preparation Checklist Site Preparation Checklist Planning the location and layout of your equipmen t rack or wiring closet is essenti al for successful switch operation[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-5 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix E Site Planning an d Maintenance Records Site Preparation Checklist 5 Cable and interface equipment eval u a t io n : • Cable type • Connector type • Cable distance limitations • Interface equipment (transcei[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-6 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix E Site Plann ing and Maintenanc e Reco rds Contact and Site Information Contact and Site Information Use the following w orksheet ( Ta b l e E-2 ) to record contact and site information. Ta b l e E-2 Contact and Sit [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-7 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix E Site Planning an d Maintenance Records Chassis and Module Information Chassis and Module Information Use the following w orksheets ( Ta b l e E-3 and Ta b l e E-4 ) to record informatio n about the chassis and modu[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com E-8 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 Appendix E Site Plann ing and Maintenanc e Reco rds Chassis and Mo dule Information Note Slots 7, 8, and 9 are only a vailable i n the Cisco MDS 9509 Director . 6 Supervisor 7 8 9 T able E-4 Mod ule Inf or mation (continu ed [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com IN-1 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 INDEX Numerics 12-port 4-Gbps Fi bre Channel switching modules description 1-35 figure 1-35 14/2-port Multiprot ocol Services module. See MPS-14/2 16-Port Storage Services Module 1-41 16-port switching modules description 1-[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-2 Cisco MDS 9500 Series Hard ware I nstallation Guide OL-19587-01 Bladeswitch 1-9 C cabinet installati on guidelines 2-2 cabinets perforated, requirements B-3 requirements B-1 See also racks solid wall requirement s B-4 space requirements B-2 cabling COM1 port D-3 console port D-2 [...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-3 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 connecting COM1 port 3-4 console port 3-2 Fibre Channel ports 3-9 MGMT 10/100/1000 3-6 MGMT 10/100 Ethernet port 3-7 console port cabling D-2 connecting 3-2 pinouts D-2 contact and site information E-6 crossbar fan mod[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-4 Cisco MDS 9500 Series Hard ware I nstallation Guide OL-19587-01 G Genaration 3 Modules Installing the MDS 9000 4/4 4-Port 8-Gbps Host-Optimized Module A-3 Generation 1 modules services mo dules 1-41 switching modules 1-32 Generation 2 modules switching modules 1-32 Generation 3 m[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-5 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 switching modules (tabl e) 1-37, 1-40 M maintaining CSM 2-50 CSM disk drives 2-51 fiber optic cables 3-16 SFP transceivers 3-16 maintenance records E-1 MDS 9506 Director description 1-7 grounding locatio n (figure) 2-2[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-6 Cisco MDS 9500 Series Hard ware I nstallation Guide OL-19587-01 COM 1 port D-3 console port D-2 MGMT 10/100/1000 Ethern et port D-4 MGMT 10/100 Ethernet port D-6 plugs support ed for power supp lies D-7 port MGMT 10/100/1000 3-6 on supervi sor modu le 1-22 port indexe s availabil[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-7 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 supervisor modules 2-39 switching modules 2-45 X2 transceivers 3-11 S SAN exte nsion 1-43 serial number location (MDS 9506 Dir ector) E-3 location (MDS 9509 Dir ector) E-2 location (MDS 9513 Dir ector) figure E- 2 serv[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-8 Cisco MDS 9500 Series Hard ware I nstallation Guide OL-19587-01 memory options 1-22 nondisruptive restart 1-21 processor 1-22 redundant central arbiter 1-21 support (note) 1-21 warm switch over 1-22 Supervisor-2 Ethernet port 3-6 Supervisor-2 modules CompactFlash cards 1-19 Compa[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-9 Cisco MDS 9500 Series Hardware Installation Guide OL-19587-01 description 1-56, C-19 installing 3-11 removing 3-11 supported (table) C-20[...]

S end documentation comments to mdsfeedbac k-doc@cisco.com Index IN-10 Cisco MDS 9500 Series Hard ware I nstallation Guide OL-19587-01[...]