Dodge 2008 LX48 Charger manuel d'utilisation

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 7 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

[...]

INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual .................. 4 m W arnings And Cautions ................... 6 m V ehicle Identification Number ............... 6 m V ehicle Modifications / Alterations ........... 7 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W or d About Y our Keys .................. 1 2 ▫ W ireless Ignition Node (WIN) ............. 1 2 ▫ FOB W ith Integrated Ke y................. 1 3 ▫ T ip Start Feature ....................... 1 4 ▫ Ignition Key Removal ................... 1 4 ▫ Key-In-Ignition Reminder ............[...]

▫ T o Unlatch The T runk ................... 2 4 ▫ Using The Panic Alarm .................. 2 4 ▫ Programming Additional T ransmitters ........ 2 5 ▫ T ransmitter Battery Service ............... 2 5 ▫ General Information .................... 2 6 m Remote Starting System — If Equipped ........ 2 6 ▫ How T o Use Remote Start ...........[...]

▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag ............ 5 0 ▫ Event Data Recorder (EDR) ............... 6 3 ▫ Child Restraint ........................ 6 5 m Engine Break-In Recommendations ........... 7 4 m Safety T ips ............................ 7 5 ▫ T ransporting Passengers ................. 7 5 ▫ Lock [...]

A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the double-sided integrated key into the igni- tion switch with either side up. Wireless Ignition Node (WIN) The W ireless Ignition Node (WIN) opera[...]

Fob with Integrated Key The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and a valet key , which stores in the rear of the Fob. The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead. The valet key is also for locking the glove box. [...]

Tip Start Feature Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. Ignition Key Removal Place the selector lever in “P” ([...]

CAUTION! An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to r emove the key . NOTE: The Key-In-Ignition reminder only sounds when the ignit[...]

flash after the bulb check, it indicates that someone used an invalid Fob to start the engine. Either of these condi- tions will result in the engine being shut of f after two (2) seconds. If the V ehicle Security Alarm Indicator Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is [...]

location. This number is requir ed for dealer replacement of Fobs. Duplication of Fobs may be performed at an authorized dealer or by using the Customer Key Pro- gramming procedur e. This procedur e consists of pro- gramming a blank Fob to the vehicle electronics. A blank Fob is one, which has never been programmed. NOTE: When having the Sentry Key[...]

NOTE: If a programmed key is lost, see your dealer to have all remaining keys erased fr om the systems memory . This will prevent the lost key from starting your vehicle. The remaining keys must then be r epro- grammed. All vehicle keys must be taken to the dealer at the time of service to be repr ogrammed. General Information The Sentry Key system[...]

T o Arm the System: Remove the key from the ignition switch and either pr ess a power door lock switch while the driver or passenger door is open or press the LOCK button on the Remote Keyless Entry (RKE) transmitter . After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds. During that time, the V [...]

If the alarm system is armed and the battery becomes disconnected the system will remain armed when the battery is reconnected. The exterior lights will flash, the horn will sound, and the ignition will not start the vehicle. If this occurs, disarm the system. T amper Alert If something has triggered the system in your absence, the horn will sound [...]

T o unlock the doors: Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door , or twice within 5 seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors First This feature lets you pr [...]

2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle, by pressing the LOCK/UNLOCK buttons on the transmitter with the ignition switch in the LOCK position, and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the transmitter wh[...]

4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the transmitter while you are in the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. T urn Headlights [...]

1. Press the LOCK button on a programmed transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press the P ANIC button while still holding the LOCK button. 2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle, by pressing the LOCK button on the transmitter with the ignition switch in the LOC[...]

• Y ou may need to be less than 35 feet (1 1 meters) from the vehicle when using the transmitter to turn off the panic alarm due to the radio frequency noises emitted by the system. Programming Additional T ransmitters Refer to SENTR Y KEY “Customer Key (Fob) Program- ming.” (See page 17 for more information.) If you do not have a programmed [...]

3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, includi[...]

• Hood closed. • T runk closed. • Hazard switch of f. • Brake switch inactive (brake pedal not pressed). • Ignition key removed fr om ignition switch. • Battery at an acceptable charge level. • RKE Panic button not pressed. T o Enter Remote Start Mode Press and r elease the Remote Start button on the RKE transmitter twice within 5 sec[...]

T o Exit Remote Start Mode & Drive the V ehicle Before the end of the 15-minute cycle, pr ess and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, prior to the end of the 15-minute cycle, insert the key into the ignition switch and turn the switch to the ON position[...]

If the door lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the key is not inside the vehicle before closing the door . W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle, [...]

If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you fr om acciden- tally locking the key in the vehicle. Removing the key or closing the door will allow the locks to operate. If a door is open, the key is in the ignition, and the ignition is in the[...]

2. Cycle the ignition switch between LOCK and ON and then back to LOCK 4 times ending up in the LOCK position. 3. Depress the power door lock switch to lock the doors. 4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this feature to its previous setting. NOTE: Use the Automatic Door Lock[...]

• For vehicles not equipped with the EVIC, performing the following procedur e: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and then back to LOCK 4 times ending up in the LOCK position. 3. Depress the power door unlock switch to unlock the doors. 4. A single chime will indicate the comple[...]

3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside whe[...]

2. Insert the tip of the valet key or alike into the child lock control and pull it downwar d. 3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: After disengaging the child protection door lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window controls on the driver?[...]

There ar e single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACC position. W ARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entra[...]

programmable. For details, r efer to “Delay Power Off to Accessories Until Exit,” under “Personal Settings (Cus- tomer Programmable Featur es),” under “Electronic V e- hicle Information Center (EVIC)” in Section 4 of this manual. Auto Up Feature with Anti–Pinch Protection — If Equipped Lift the window switch to the second detent, re[...]

• Any impact due to rough r oad conditions may trigger the auto reverse function unexpectedly during auto- closure. If this happens, pull the switch lightly to the first detent and hold to close window manually . W ARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closi[...]

1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Wind Buffet[...]

The trunk lid can be r eleased from outside the vehicle by pressing the tr unk button on the Remote Keyless Entry (RKE) transmitter twice within 5 seconds. W ith the ignition switch in the ON position, the trunk open symbol will display in the instrument cluster indi- cating that the trunk is open. The odometer display will reappear once the tr unk[...]

T runk Emergency Release The trunk of your vehicle is equipped with an emer gency release handle. It is located on the inside of the tr unk lid, near the latch, and is coated so that it glows in a darkened trunk. Pull on the handle to open the trunk. OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint [...]

W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly . Buckle up even though you are an excellent driver , [...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Pulling Out Lap/Shoulder Belt Connecting Latch Plate T o Buckle THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 43 2[...]

W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop, you could move too far forward, in- creasi[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well. In a collision, it could even cut into you. Be sure the[...]

Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt can be adjusted upward or downwar d to position the belt away from your neck. Push and fully depr ess the button above the webbing to release the anchorage, and then move it up or down to the position that serves you best. As a guide, if you are shor[...]

3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. Seat Belt Pretensioners The seat belts for both front seating positions ar e equipped with pretensioning devices that ar e designed to remove any s[...]

be reactivated if the driver’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is gr eater than 5 mph (8 km/h). BeltAlert t Programming The Enhanced W arning System (BeltAlert t ) can be en- abled or disabled by your authorized dealer or by performing the following steps: NOTE: DaimlerChrysler does not recommend deacti- vati[...]

Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked. However , the belt will still retract to r emove slack in the shoulder belt. Use The Automatic Locking Mode any time a child safety seat is installed in a seating position that has a seat belt with this feature. Seat belts that have the Automatic Lo[...]

Seat Belt Extender If a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage (if so equipped) is in its lowest position, your dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough. When it is not requir ed, remove the extender ,[...]

NOTE: The front airbags ar e certified to the Federal regulations that allow less for ceful deployment. The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity . W ARNING! • Do not put anything on or around the front airbag covers or attempt to manua[...]

This vehicle may also be equipped with supplemental side curtain airbags to protect the driver and passengers sitting next to a window and/or supplemental front-seat- mounted side airbags. If the vehicle is equipped with supplemental side curtain airbags, they are located above the side windows. Their covers are also labeled SRS AIRBAG. NOTE: Airba[...]

W ARNING! • If your vehicle is equipped with supplemental front-seat- mounted side airbags, do not use accessory seat covers or place objects between you and the seat airbags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury . • If your vehicle is equipped with supplemental front-seat- [...]

NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. Along with the seat belts, front airbags work with the instrument panel knee bolsters to pr ovide improved protection for the driver and fr ont passenger . Side curtain and seat airbags also work with [...]

5. If a child from 1 to 12 years old must ride in the fr ont passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child r estraint (refer to information on Child Restraint in this section). 6. Y ou should read the instr uctions provided with your child restraint to make sur e that you are using it[...]

Air Bag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors (if equipped) • Airbag W arning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above Side W in- dows (if equipped) • Supplemental Front-Seat-Mounted Side Ai[...]

• The ORC also monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON positions. These include all of the items listed above except the knee bolster , the instru- ment panel, and the steering wheel and column. If the key is in the LOCK position, in the ACC position, or not in the ignitio[...]

separate and fold out of the way , as the bags inflate to their full size. The bags fully inflate in about 50 - 70 milliseconds. This is about half of the time that it takes to blink your eyes. The bags then quickly deflate while helping to restrain the driver and fr ont passenger . The driver’s front airbag gas is vented thr ough vent holes in t[...]

seam in the seat’s trim cover and opens into the space between the occupant and the door . The airbag inflates at a very high speed and with enough force to injur e you if you are not belted and seated pr operly , or if items are positioned in the ar ea where the fr ont-seat- mounted side airbag inflates. This especially applies to children. The [...]

If A Deployment Occurs The airbag system is designed to deploy when the ORC detects a moderate-to-severe collision, to help r estrain the driver and front passenger , and then to immediately deflate. NOTE: A frontal collision that is not severe enough to need airbag protection will not activate the system. This does not mean something is wrong with[...]

W ARNING! Deployed airbags can’t protect you in another colli- sion. Have the airbags replaced by an authorized dealer as soon as possible. Enhanced Accident Response System In the event of an impact that causes airbag deployment, with the vehicle stopped, and the vehicle communication network intact, and the power intact, the Enhanced Accident R[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passen[...]

Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to recor d up to 5 seconds of specific vehicle data parameters (see the following list) in an event data recor der prior to the moment of airbag deployment, or near deployment, and up to a quarter second of high-speed deceleration data during and/or after airbag deploym[...]

may be released for incorporation in aggr egate crash databases, such as those maintained by the US govern- ment and various states. Data of a potentially sensitive nature, such as would identify a particular driver , ve- hicle, or crash, will be treated confidentially . Confidential data will not be disclosed by DaimlerChrysler Corpora- tion to an[...]

• T raction/stability control status • T ire pressur e monitoring system status (if equipped) Child Restraint Everyone in your vehicle needs to be buckled up all the time — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and[...]

Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and “convertible” child seats. • The infant carrier is only used rearwar d-facing in t[...]

The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seat back, they should use a belt-positioning booster seat. The child and bel[...]

W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • A rearward facing child restraint should only be used in a rear seat. A rearward f[...]

without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child r estraint to the vehicle structur e. LA TCH-compatible child restraint systems ar e now avail- able. However , because the lower anchorages are to be introduced over a period of years, child r estraint system[...]

Installing the LA TCH-Compatible Child Restraint System W e urge that you carefully follow the dir ections of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system. The re[...]

most direct path between the anchor and the child restraint. Finally , tighten all three straps as you push the child restraint r earward and downwar d into the seat, removing slack in the straps accor ding to the child restraint manufactur er’s instructions. NOTE: • Ensure that the tether strap does not slip into the opening between the seat b[...]

Installing Child Restraints Using the V ehicle Seat belt The passenger seat belts are equipped with either cinch- ing latch plates or automatic locking retractors, which ar e designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip. Pulling up on the shoulder portion of the lap/shoulder bel[...]

T o attach a child restraint tether strap: 1. Rotate the cover over the anchor directly behind the seat where you ar e placing the child restraint. 2. Route the tether strap to provide the most dir ect path for the strap between the anchor and the child seat. 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove sl[...]

T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thr own about and possibly injured, or injur e a passenger during panic braking or in a collision. Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts. ENGINE BREAK-IN RECOMMENDA TIONS A lo[...]

SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped[...]

Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for br oken, damaged, deteriorated, or mispositioned parts. Open seams or loose conne[...]

Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision. Rear seat belt assemblies must be replaced after a colli[...]

Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tr ead and sidewall for cuts and cracks. Check the wheel nuts for tightness. Check the tires (including spar e) for proper pr essure. [...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 8 3 ▫ Inside Day/Night Mirror ................. 8 3 ▫ Automatic Dimming Inside Mirror — If Equipped .......................... 8 4 ▫ Outside Mirrors ....................... 8 4 ▫ Exterior Mirrors Folding Featur e — If Equipped ...............[...]

▫ Things Y ou Should Know About Y our UConnect™ System .................... 1 0 5 ▫ General Information ................... 1 1 4 m Seats ................................ 1 1 4 ▫ Manual Seats — If Equipped ............. 1 1 4 ▫ Power Seats — If Equipped .............. 1 1 5 ▫ Power Reclining Seats — If Equipped ....... 1 1 6 ▫ L[...]

▫ Mist Feature ......................... 1 3 1 ▫ W indshield W ashers ................... 1 3 1 ▫ Headlights On W ith W ipers (A vailable W ith Auto Headlights Only) ................. 1 3 1 ▫ Adding W asher Fluid .................. 1 3 2 m T ilt/T elescoping Steering Column ........... 1 3 3 m Adjustable Pedals — If Equipped ........... 1[...]

m Power Sunroof — If Equipped ............. 1 4 6 ▫ Opening Sunroof - Expr ess .............. 1 4 7 ▫ Closing Sunroof - Expr ess ............... 1 4 7 ▫ Pinch Protect Featur e ................... 1 4 7 ▫ Pinch Protect Override ................. 1 4 7 ▫ V enting Sunroof - Express ............... 1 4 7 ▫ Sunshade Operation .............[...]

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjusted while [...]

Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare fr om vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light, next to the button, will illuminate to indicate when the dimming feature is activated. CAUTION! T o avoid damage to[...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger sid[...]

Power Remote-Control Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror , or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move. Use the center off position to guard against accide[...]

Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor . T o use the mirror , rotate the sun visor downward and swing the mirror cover upwar d. The light turns on automatically . Closing the mirror cover turns of f the lights. HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED NOTE: The sales code RER ra[...]

NOTE: The UConnect™ system use requir es a cellular phone equipped with the Bluetooth 9 Hands-Free Pr ofile, 9 version 0.96 or higher . See UConnect™ website for sup- ported phones. NOTE: For UConnect™ customer support, visit the following web sites: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect • or[...]

radio or the mirror has the two contr ol buttons (Phone Button and V oice Recognition Button) that will enable you to access the system. V oice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation” section. The UConnect™ system can be used with any Hands- Free Pr ofile certified[...]

• For certain operations, compound commands can be used. For example, instead of saying 9 Setup 9 and then 9 Phone Pairing, 9 the following compound command can be said: 9 Setup Phone Pairing. 9 • For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and s[...]

T o complete the pairing process, you will need to refer - ence your cellular phone owner’s manual. The UCon- nect™ website may also provide detailed instr uctions for pairing. The following are general phone to UConnect™ System pairing instructions: • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following b[...]

Dial by Saying a Number • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Dial. 9 • System will prompt you to say the number you want call. • For example, you can say 9 234-567-8901. 9 The phone number that you enter must be of valid length and combination. Based on the country in which the [...]

Add Names to Y our UConnect™ Phonebook NOTE: Adding names to phone book is recommended when vehicle is not in motion. • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook New Entry . 9 • When prompted, say the name of the new entry . Use of long names helps the voice recognition and i[...]

Exchange Profile (OBEX). Please see your phone owners’ manual for specific instructions on how to send these entries from your phone. NOTE: • Phone handset must support Bluetooth OBEX trans- fers of phonebook entries to use this feature. • Some phones cannot send phonebook entries if they are alr eady connected to any system via Bluetooth, an[...]

9 Phonebook Edit 9 can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number , but you can add John Doe’s work number later using the 9 Phonebook Edit 9 feature. Delete Entries in the UConnect™ Phonebook NOTE: Editing phone book entries is re[...]

• After confirmation, the phone book entries will be deleted. • Note that only the phone book in the current language is deleted. List All Names in the UConnect™ Phonebook • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook List Names. 9 • The UConnect™ system will play the nam[...]

call, press and hold the ’Phone’ button until you hear a single beep indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your c[...]

Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the “Phone” button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-W ay Calling T o initiate three-way calling, press the “V oice Recogni- tion” button while a call is in progr ess and make[...]

Call Continuation Call continuation is progr ession of a phone call on UConnect™ system after the vehicle ignition key has been switched to off. Call continuation functionality available on the vehicle can be any one of three types: • After ignition key is switched off, a call can continue on the UConnect™ system either until the call ends or[...]

Emergency Assistance If you are in an emer gency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect™ system is operational, you may reach the emer gency number as follows: • Press the “Phone” button to begin. • After the 9 Ready 9 pr[...]

Please refer to the 24-Hour “T owing Assistance” cover - age details in the W arranty information booklet and on the 24–Hour T owing Assistance Car d. Paging T o learn how to page refer to 9 W orking with Automated Systems. 9 Paging works properly except for pagers of certain companies which time-out a little too soon to work properly with th[...]

entries. T o use this feature, dial the number you wish to call and then press the “V oice Recognition” button and say “Send.” The system will prompt you to enter the name or number , say the name of the phonebook entry you wish to send. The UConnect™ will then send the corresponding phone number associated with the phone- book entry as t[...]

notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect™. The status is given for roaming, network signal strength, phone battery str ength, etc. Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system [...]

Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred fr om your cellular phone to the UConnect™ system without terminating the call. T o transfer an ongo- ing call from your UConnect™ pair ed cellular phone to the UConnect™ system or vice-versa, press the “V oic[...]

• Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Setup Select Phone 9 and follow the prompts. • Y ou can also press the “V oice Recognition” button anytime while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next p[...]

From outside the UConnect™ mode (e.g. fr om radio mode) • Press and hold the “V oice Recognition” button for 5 seconds until the session begins, or , • Press the “V oice Recognition” button and say 9 Setup, V oice T raining 9 command. Repeat the words and phrases when pr ompted by the UConnect™ system. For best results, the V oice T[...]

• fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. • When navigating through an automated system, such as voice mail, or when sending a page, at the end of speaking the digit string, make s[...]

• dry weather condition. • operation from driver seat. • Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromi[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 109 3[...]

1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 1 1 3[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts. continue delete dial download edit emergency English erase all Espanol Francais help home 1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. SEA TS Manual Seats — If [...]

W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]

W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat control[...]

W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. Lumbar Support — If Equipped This feature allows you to incr ease or decrease the amount [...]

Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjust the restraint so that the upper edge is as high as practical. T o raise it, pull upward on the head r estraint. T o lower it, depress the button on the post guide and push downward on the head restraint. Heated Seats — If Equippe[...]

The controls for each heater ar e located near the bottom center of the instrument panel. After turning on the ignition, you can choose from High, Of f, or Low heat settings. Amber LEDs in the top portion of each switch indicate the level of heat in use. T wo LEDs will illuminate for high, one for low , and none for off. Press the switch once to se[...]

W ARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion, or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods. Do not place anything [...]

When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seatback above the seat strap. W ARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position the seat will not provide the proper stability for child seats and/or pas[...]

Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 6 inches (15 c[...]

LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the headlights, parking lights, instru- ment panel lights, instrument panel light dimming, inte- rior lights, and fog lights. Rotate the headlight switch clockwise to the first detent for parking light and instrum[...]

Automatic Headlights — If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. T o turn the system ON, rotate the headlight switch counter -clockwise to the AUTO (A) position. When the system is ON, the Head- light T ime Delay feature is also ON. This means the headlights will stay ON for up to 90 s[...]

Headlights On with Wipers (A vailable with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the headlight switch is placed in the AUT O position. In addition, the headlights will turn off when the wipers ar e turned off if they wer e turned on by this feature.[...]

Daytime Running Lights — If Equipped The high beam headlights will come on as Daytime Running Lights, whenever the ignition switch is on, the headlights are of f, and the parking brake is off. The headlight switch must be used for normal nighttime driving. Lights-on Reminder If the headlights or parking lights are on after the ignition is turned [...]

T urn Signals Move the Multi-Function Lever up or down and the corresponding turn signal indicator in the instr ument cluster flashes to show proper operation of the fr ont and rear turn signal lights. Y ou can also signal a lane change by moving the lever partially up or down without moving beyond the detent. Releasing the lever at the detent will[...]

Flash to Pass Y ou can signal another vehicle with your headlights by lightly pulling the Multi-Function Lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased. Overhead Console Map/Reading Lights These lights are mounted between the sun visors on the overhead console. Each light is turne[...]

because a door is open. This includes the glove box light, but not the trunk light. T o restor e interior light operation, either turn the ignition switch ON or cycle the light switch. Dimmer Control The dimmer control is part of the headlight switch, and is located on the left side of the instrument panel. W ith the parking lights or headlights on[...]

WINDSHIELD WIPERS AND W ASHERS The multi-function lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column. Rotate the end of the multi-function lever to the first detent past the intermittent settings for Low-speed wiper operation, or to the second [...]

the wipe interval from a minimum of one cycle every second to a maximum of approximately 30 seconds between cycles. W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with de[...]

The Headlights On with W ipers feature can be turned on or off thr ough the Electronic V ehicle Information Center (EVIC) — if equipped. For details, refer to ”Headlights On with W ipers,” under “Personal Settings (Customer Programmable Featur es),” under “Electronic V ehicle In- formation Center” in Section 4 of this manual. Adding W[...]

W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column[...]

W ARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driv- ing. Adjusting the steering wheel while driving or driving without the telescoping adjustment locked could cause the driver to lose control of the vehicle. ADJUST ABLE PEDALS — IF EQUIPPED The adjustable pedal system is designed to allo[...]

• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become lim- ited if movement is stopped by an o[...]

T o Activate: Push and release the (“ON/OFF”) button lo- cated on the end of the speed control lever . The indicator light in the instrument cluster will illuminate to show that the speed control sys- tem is ON. T o turn the system OFF , push and release the (“ON/OFF”) button again. The system and the indicator light will turn off. W ARNING[...]

• Pull the speed control lever towar d you (“CANCEL”). Pushing and releasing the (“ON/OFF”) button or turning off the ignition erases the set speed fr om memory . T o Resume Speed: If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the pr evious se[...]

Using Speed Control On Hills NOTE: The speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal. The automatic transmission will downshift while climb- ing uphill or descending downhill. This downshift is necessary to maintain vehicle set speed. On steep hills, a greater speed loss or gain may occur [...]

Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn on the light. Pr ess it a second time to turn off the light. These lights also turn on when a door is opened, or when the unlock button on the remote keyless entry transmitter is pressed, or when the dimmer contr ol is turned fully up[...]

W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards. This includes most[...]

It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink t for more ef ficient training and accurate transmission of the radio-frequency signal. Y our vehicle should be parked outside of the garage while training. 1. T urn the ignition switch to the ON/RUN position. 2. Place the hand-hel[...]

NOTE: After training a HomeLink t channel, if the garage door does not operate with HomeLink t and the garage door opener was manufactured after 1995, the garage door opener may have rolling code. If so, pr oceed to the heading “Programming A Rolling Code System.” 5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the gara[...]

7. Return to the vehicle and press the programmed HomeLink t button twice (holding the button for 2 sec- onds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a thir d time (for 2 seconds) to complete the training. If you are have any pr oblems, or requir e assistance,[...]

Then proceed with Step 4 under “Pr ogramming HomeLink.” earlier in this section. Using HomeLink T T o operate, simply press and release the pr ogrammed HomeLink t button. Activation will now occur for the trained device (i.e. garage door opener , gate operator , security system, entry door lock, home/office lighting, etc. The hand-held transmit[...]

T roubleshooting Tips If you are having tr ouble programming HomeLink t , her e are some of the most common solutions: • Replace the battery in the original transmitter . • Press the Learn Button on the Garage Door Opener to complete the training for Rolling Code. • Did you unplug the device for training, and remember to plug it back in? If y[...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment ma[...]

Opening Sunroof - Express Press the switch r earward and r elease, and the sunroof will open automatically from any position. The sunr oof will open fully and then stop automatically . This is called Express Open. During Expr ess Open operation, any movement of the sunroof switch will stop the sunr oof. Closing Sunroof - Express Press the switch fo[...]

Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind bu[...]

Sunroof Fully Closed Press the switch forwar d and release to ensur e that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There ar e two 12-volt electrical outlets on this vehicle. Both of the outlets are pr otected by a fuse. The 12-volt power outlet next to the ash receiver tray (if equipped with an optional Smoker’s Package) has power a[...]

The center console outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr event engine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cell[...]

CUP HOLDERS Front Seat Cup Holders The cup holders are located in the forwar d edge of the center console. Front Seat Cup Holders UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 151 3[...]

Rear Seat Cup Holders The rear seat cup holders ar e located in the center armrest between the rear seats. The cup holders ar e positioned forward in the armr est and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the r ear occupants’ el- bows. Rear Seat Cup Holders 152 UNDERST ANDING T[...]

STORAGE Console Features The center console contains two shift bezel cubby bins with rubber mats for holding small items. For vehicles not equipped with navigation radio, the console also contains an extra storage bin located below the climate control, which holds up to four CD jewel cases. W ithout V ehicle Entertainment System (VES) T wo separate[...]

The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also con- tains a 12-volt power outlet and a molded-in coin holder (designed to hold various size coins). A slot in the left and right side of the top compartment provides clearance for power cords t[...]

W ARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious in- jury . • The cargo area in the rear of the vehicle (with the rear seatbacks in the l[...]

LOAD LEVELING SYSTEM — IF EQUIPPED The automatic load leveling system will provide a level- riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the corr ect height. It takes approximately 1 mile (1.6 km) of driving for the leveling to complete de[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel And Controls ............. 1 6 1 m Base Instrument Cluster .................. 1 6 2 m Premium Instr ument Cluster — If Equipped .... 1 6 3 m Instrument Cluster Descriptions ............ 1 6 4 m Electronic V ehicle Information Center (EVIC) – If Equipped ..........................[...]

▫ AM Reception ....................... 1 9 0 ▫ FM Reception ........................ 1 9 0 m Sales Code REN — Multimedia System — If Equipped ........................... 1 9 1 ▫ Operating Instructions — Satellite Radio (If Equipped) ........................ 1 9 2 ▫ Operating Instructions — Hands-Fr ee Communication (UConnect™) (If[...]

▫ Operation Instructions - CD Mode For CD And MP3 Audio Play .................. 2 1 9 ▫ Notes On Playing MP3 Files ............. 2 2 2 ▫ List Button (CD Mode For MP3 Play) ....... 2 2 4 ▫ Info Button (CD Mode For MP3 Play) ....... 2 2 4 m Satellite Radio (RSC) — If Equipped (REQ And RES Radios Only) ...................... 2 2 6 ▫ System[...]

m Climate Controls ....................... 2 3 9 ▫ Manual Air Conditioning And Heating System ............................. 2 3 9 ▫ Automatic T emperature Control — If Equipped ......................... 2 4 2 ▫ Operating T ips ....................... 2 4 7 m Rear W indow Features ................... 2 5 0 ▫ Electric Rear W indow Defroster[...]

INSTRUMENT P ANEL AND CONTROLS 1 — Air Outlet 6 — Radio 1 1 — Ignition Switch 2 — Instrument Cluster 7 — Climate Control 12 — Hood Release 3 — Hazard Switch 8 — Heated Seat Switch* 13 — T runk Release Switch 4— Electronic Stability Pr ogram Off Button* / T raction Control System Of f Button* 9 — Power Outlet 14 — Headlight S[...]

BASE INSTRUMENT CLUSTER 162 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

PREMIUM INSTRUMENT CLUSTER — IF EQUIPPED UNDERST ANDING YOUR INSTRUMENT P ANEL 163 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Base Cluster The word 9 TRIP 9 will appear when this button is pr essed. Push in and hold the button for two seconds when the trip odometer displays to reset it to 0 miles (kilom[...]

6. Charging System Light This light shows the status of the electrical charg- ing system. The light should turn on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or turns on while driving, turn off some of the vehicle’s non-essential electrical devices (i.e. radio), or slightly increase en[...]

The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads (H), pull over and stop [...]

NOTE: Check for a defective outside light bulb if either indicator flashes at a rapid rate. (See page 127 for more information.) 10. Airbag W arning Light This light will turn on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, or stays on, or turns on while driving, then[...]

14. Oil Pressure W arning Light This light shows low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle, and shut off the engine as soon as possible. A single chime will sound when this light turns on. Do not operate the vehicle until the cause is corrected. T[...]

19. Odometer/T rip Odometer The odometer shows the total distance the vehicle has been driven. The trip odometer shows individual trip mileage. Refer to “T rip Odometer Button” for additional information. NOTE: U.S. federal regulations r equire upon transfer of vehicle ownership, the seller certify the mileage the vehicle has been driven. There[...]

next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the “ON” position. T o turn off the message temporarily[...]

NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- tions. The vehicle should have service performed, and the brake fluid level checked. Immediate repair is necessary if brake failur e is indicated. W ARNING! Driving a vehicle with the brake light on is danger- ous. Part of the brake system may ha[...]

21. V ehicle Security Alarm (VSA) Indicator Light — If Equipped The VSA indicator Light flashes rapidly when the VSA is arming, and slowly when the VSA is armed. (See page 18 for more information.) 22. T ire Pressur e Monitoring T elltale Light — If Equipped Each tire, including the spar e (if provided), should be checked monthly when cold and [...]

system detects a malfunction, the telltale will flash for approximately one minute and then r emain continuously illuminated. This sequence will continue upon subse- quent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the sys- tem may not be able to detect or signal low tire pr essure as intende[...]

If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is requir ed. However , the con- ventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restor[...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) – IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the instrument cluster below the speedometer . V ehicles equipped with steering wheel mounted buttons (de- scribed in this section) are also equipped with the EVIC. The EVIC cons[...]

The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: Press and r elease the MENU button and the mode displayed will change between T rip Functions, Navigation (if equipped), System Status, Personal Settings, and T elephone (if equipped). Press the FUNCTION SELECT button to accept a sele[...]

Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the Electr onic V ehicle Information Center (EVIC) displays the following messages: • T urn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mile [1.6 km] with either turn signal on) • Left Front T urn Signal Light Out (w[...]

• Check Gascap (refer to “Adding Fuel” in Section 5 of this manual for more details) • Oil Change Required (with a single chime) Oil Change Required Y our vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has [...]

• Elapsed T ime • Display Units of Measure in Press the SCROLL button to cycle through all the T rip Computer functions. The T rip Functions mode displays the following: • A verage Fuel Economy / Fuel Saver Mode Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dash[...]

This feature allows you to monitor when the MDS switches off the fuel on four of the eight cylinders and it can be used to modify driving habits in order to incr ease the time in which the fuel saver mode is active. • Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated dis[...]

• T rip A Shows the total distance traveled for trip A since the last reset. • T rip B Shows the total distance traveled for trip B since the last reset. • Elapsed T ime Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON[...]

360° turns (in an area fr ee from lar ge metal or metallic objects) until the “CAL” message displayed in the EVIC turns off. The compass will now function normally . Manual Compass Calibration If the compass appears erratic and the “CAL” message does not appear in the EVIC display , you must put the compass into the Calibration Mode manual[...]

1. T urn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and release[...]

• Phone status: idle, voice mail, roaming, battery strength, and signal str ength in increments of 20 percent. • Call status: Incoming call, connecting, connected, air time in minutes and seconds, call ended, call failed, roaming, and no phone connection. • UConnect Active. • Caller ID phone number display . When the appropriate conditions [...]

The EVIC displays this symbol to indicate that you have voice mail. The EVIC displays this symbol to indicate a text message. The EVIC displays this symbol to indicate the battery strength of the UConnect™ phone. The EVIC displays this symbol to indicate that a phone connection has been made. The EVIC displays this symbol to indicate that the UCo[...]

display is active, the SCROLL button can be used to scroll through the list, the FUNCTION SELECT button can be used to select an item, and the AUDIO MODE button can be used to return to the pr evious menu. When the Map display is active, pressing the FUNCTION SELECT but- ton will change the Navigation Unit Display to the Menu. T urn By T urn Direct[...]

NOTE: The EVIC will not change the UConnect™ language selection. Please refer to “Language Selection” in the HANDS–FREE COMMUNICA TION (UConnect™) section of this manual for details. “Lock Doors Automatically at 15 mph (24 Km/h)” When ON is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h[...]

“Flash Lights with Remote Key Lock” When ON is selected, the front and r ear turn signals will flash when the doors are locked or unlocked with the remote keyless entry transmitter . This feature may be selected with or without the sound horn on lock feature selected. T o make your selection, press and release the FUNCTION SELECT button until ?[...]

“Delay Power Off to Accessories Until Exit” When this feature is selected, the power window switches, radio, hands–free system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 60 minutes after the ignition switch is turned off. Opening a vehicle door will cancel this fe[...]

RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent reception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. T o help you understand and sav[...]

changer (if equipped) will remain active for 10 minutes after the ignition switch is turned off. Opening either front door will cancel this featur e. NOTE: For vehicles equipped with the Electronic V e- hicle Information Center (EVIC), the radio, steering wheel radio controls (if equipped), and 6 disc CD/DVD changer (if equipped) will remain active[...]

to the car speakers while differ ent audio tracks play through the system’s wir eless headphones. This means rear seat passengers can watch a DVD on the optional rear -seat entertainment system while the driver and front seat passenger listen to the radio. Other special features include dir ect tune, music type selections, easy store pr esets, ba[...]

4. T o move the minute forward, touch the scr een where the word “Min” with the arr ow pointing upward is displayed. T o move the minute backward, touch the screen wher e the word “Min” with the arr ow pointing downward is displayed. 5. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Changing Dayligh[...]

Changing the T ime Zone 1. T urn on the system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen. 4. Select a time zone by touching the screen where your selection appear[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) i[...]

Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Fr ee Phone (UCon- nect™) feature (if equipped). Refer to “Hands-Fr ee Com- munication (UConnect™)” in Section 3 for more informa- tion. If your vehicle is not equipped with or this feature is not available on your vehicle, a “UConnect™ Sys[...]

R W/FF (Radio Mode) Pressing the r ewind or fast forward button causes the tuner to search for the next fr equency in the direction of the arrows. This featur e operates in either AM, FM or Satellite (if equipped) frequencies. TUNE Control (Radio Mode) T urn the right side rotary control clockwise to incr ease or counter-clockwise to decr ease the [...]

program format type to be selected. Many radio stations do not currently br oadcast Music T ype information. T oggle the Music T ype button to select the following format types: Program T ype 16 Digit-Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Fo[...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi[...]

• Angle – Repeatedly Pressing SELECT will change the viewing angle if supported by the DVD disc (If Equipped). NOTE: The available selections for each of the above entries varies depending upon the disc. NOTE: These selections can only be made while playing a DVD. • VES Power - Allows you to turn VES ON and OFF (If Equipped). • VES Lock - L[...]

Audio Language — If Equipped Selecting this item will allow the user to choose a default audio language (effective only if language supported by disc). If customer wishes to select a language not listed, then scroll down and select 9 other . 9 Enter the country code using the TUNE control knob to scr oll up and down to select the # and then push [...]

a disc is loaded, changes will not be effective. Also, the defaults are ef fective only if the disc supports the customer-pr eferred settings. AM and FM Buttons (Radio Mode) Press the buttons to select AM or FM Modes. SET Button (Radio Mode) — T o Set the Push-Button Memory When you are r eceiving a station that you wish to commit to push-button [...]

Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc. Customers may t[...]

Eject Button — Ejecting Compact Disc(s) Press the eject button and the push-button with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show 9 EJECTING DISC 9 when the disc is being ejected and prompt the user to r emove the disc. Press and hold the eje[...]

Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file r ecording media and formats ar e limited. When writing MP3/WMA files, pay attention to the following restrictions. Supported Media (Disc T ypes) The MP3/WMA file recording media supported by the radio are CDDA, CD-R, CD-R W , MP3,WMA, DVD V ideo, DVD[...]

If a disc contains multi formats, such as CD audio and mp3/wma tracks, the radio will only play the mp3/wma tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause play- back problems. The radio is designed t[...]

Playlist files are not supported. MP3 Pr o files are not supported. Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files. Loading times for playback of MP3/WMA files may b[...]

Press the INFO button once mor e to return to 9 elapsed time 9 priority mode. Press and hold the INFO button for 3 seconds or mor e and radio will display song titles for each file. Press and hold the INFO button again for 3 seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio [...]

SET Button (Auxiliary Mode) No function. Operating Instructions - Hands Free Phone (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section. Operating Instructions - V ideo Entertainment Sy[...]

player , USB port, 20 gigabyte Hard Drive (HDD), and the UConnect t hands-free Bluetooth cellular system. NOTE: If your vehicle is not equipped with UConnect t , the unit will respond with a “Featur e Not A vailable” message when selecting controls r elated to this feature. A 6.5-inch touch screen allows easy menu selection, while the Advanced [...]

camera, and on some models a dual display screen operation. Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Satellite Radio Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped)[...]

Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the b[...]

6. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned of f. Proceed as follows to change the curr ent setting: 1. T urn on the system. 2. T ouch the screen where the time is displaye[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOLUME contr ol knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns con[...]

If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith UCon- nect” message will display on the radio screen. Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Fr ee Phone (UCon- nect™) feature (if equipped). Refer to “Hands-Fr ee Com- munic[...]

Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above procedur e, starting at Step 2. INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or[...]

Press the r otary TUNE control knob a fifth time and F ADE will display . T urn the TUNE control knob to the left or right to adjust the sound level between the front and rear speakers. Press the r otary TUNE control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for[...]

Program T ype 16 Digit-Character Display Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to th[...]

AM and FM Buttons Press the buttons to select AM or FM Modes. SET Button — T o Set the Push-Button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and r elease t[...]

NOTE: This Radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable com- pact discs (CD-R W) compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into [...]

If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the righ[...]

Press the right SEEK button to move to the next ran- domly selected track. Press the RND button a second time to stop Random Play . Notes On Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (D[...]

• Level 2: 31 (including a separator 9 . 9 and a 3-character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs created with an option such as 9 keep disc open after writing 9 are most likely multisession discs. The [...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

Press and hold the INFO button again for 3 seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play th[...]

SA TELLITE RADIO (RSC) — IF EQUIPPED (REQ AND RES RADIOS ONL Y) Satellite radio uses direct satellite to r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio. This service offers up to 100 channels of music, sports, news, entertainment, and programming[...]

selected. Press the TUNE contr ol knob and the Sirius ID number will display . The Sirius ID number display will time out in 2 minutes. Press any button on the radio to exit this screen. Selecting Satellite Mode Press the SA T button until 9 SA T 9 appears in the display . A CD may remain in the radio while in the Satellite radio mode. Satellite An[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it. SCAN Button Pressing[...]

By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset channel. SETUP Button Pressing the SETUP bu[...]

Operating Instructions - Hands Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Video Entertainment System (VES T ) (If Equipped) Refer to separate “V ideo Entertainment System (VES t ) Guide.” VIDEO ENTERT AINMENT SYSTEM — IF EQUIPPED The optional VES™ (V i[...]

NOTE: Close the armrest after the LCD scr een has been raised to its viewing position. • The touch screen radio and DVD player contr ols allow front seat operation for easy setup in the case of younger rear seat passengers. • A battery-powered infrar ed remote contr ol that snaps into a molded compartment in the center console armrest upper sto[...]

• T wo wireless infrared headsets allow r ear seat passen- gers to listen to the same or individual audio sources. Audio/V ideo RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly fr om an MP3 player . 1. V i[...]

• the iPod t battery charges when plugged into the UCI connector . Connecting the iPod T Use the optional connection cable to connect an iPod t to the vehicle’s UCI connector (which is located in the glove box on some vehicles. This location may vary with vehicle). Once the iPod t is connected and synchronized to the vehicle system (this may ta[...]

R W (Rewind) Button Press and hold the “R W” button to move backward in the current track. Holding the “R W” button long enough will take you back to the beginning of the current track. Pressing and r eleasing the “R W” button will go back 5 seconds of the current track. FF (Fast Forward) Button Press and hold the “FF” button to mov[...]

SCAN Button Pressing the “SCAN” button will play the first 5 seconds of each track in the current list and then forwar d to the next song. T o stop the SCAN mode and start playing the desired track, pr ess the “SCAN” button again. During the SCAN mode, you can also press the SEEK button to the left or right to go to the previous or next tra[...]

During all List modes, the iPod t will display all lists in “wrap-around” mode. So if the track you wish to select is at the bottom of the list, you just turn the “TUNE/ SCROLL” knob backwards (counter -clockwise) to get to the track faster . Radio Preset Buttons In the List mode, the radio preset buttons ar e used as shortcuts to the follo[...]

REMOTE SOUND SYSTEM CONTROLS The remote sound system contr ols are located on the surface of the steering wheel at the 3 and 9 o’clock positions. V ehicles equipped with steering wheel mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC). The EVIC features a driver -interactive display . This is located in the[...]

If the Compass/T emp/Audio screen is already displayed when the AUDIO MODE button is pressed, then the mode will change (i.e. from AM to FM, to Media mode, etc., depending on which radio is in the vehicle). When the EVIC is in the Compass/T emp/ Audio screen, pr ess the FUNCTION SELECT button to operate various radio, media, and Universal Customer [...]

RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]

Blower Control The rotary knob on the left contr ols the blower . The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the OFF position or the ignition is turned OFF . T emperature Control The rotary knob in the center contr ols air temperature. Rotate the contr ol to the left for coo[...]

is also directed to the fr ont door windows through the side window demister grilles. • Floor Air flows through the floor outlets located under the instrument panel and into the r ear seating area thr ough vents under the front seats. • Bi-Level Air flows through the outlets located in the instrument panel and thr ough the outlets located on th[...]

Automatic T emperature Control — If Equipped Automatic Operation The Infrared Dual-Zone Climate Contr ol System auto- matically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger . T o accomplish this, the system gathers information from the controls on the climate contr ol, from a dual sun[...]

or HI AUT O. The LO AUTO position should be used for front seat occupants only . The HI AUTO position should be used when more airflow is desir ed, or when rear seat occupants are pr esent. Then, dial in the temperature you would like the system to maintain by rotating the driver or passenger T emperature Control knob. Once the com- fort level is s[...]

NOTE: • The surface of the climate control panel and the top center of the instrument panel should be kept fr ee of debris due to the location of the climate control sensors. Mud on the windshield may also cause poor operation of this system. • Extended use of recir culation may cause the windows to fog. If the interior of the windows begins to[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL 245 4[...]

The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles[...]

turn off the air conditioning. An LED in the button illuminates when manual compressor operation is selected. NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUTO position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired. [...]

W inter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. V acation Storage Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, r un the air condi- tioning system at idle for about five minutes in the fresh air and high blower setting[...]

Control Setting Suggestions for V arious W eather Conditions UNDERST ANDING YOUR INSTRUMENT P ANEL 249 4[...]

REAR WINDOW FEA TURES Electric Rear Window Defroster The electric Rear W indow Defroster Control is located on the climate control. Pr ess this button to turn on the rear window defr oster and the heated side mirrors (if equipped). An LED in the button will illumi- nate when the rear window defr oster is ON. The de- froster automatically turns of f[...]

ST ARTING AND OPERA TING CONTENTS m Starting Procedur es ..................... 2 5 5 ▫ Automatic T ransmission ................ 2 5 6 ▫ Normal Starting (T ip Start) .............. 2 5 6 ▫ Extremely Cold W eather (Below 2 20°F Or 2 29°C) ............................. 2 5 6 ▫ If Engine Fails T o Start ................. 2 5 7 ▫ After Start[...]

m Driving On Slippery Surfaces .............. 2 7 5 ▫ Acceleration ......................... 2 7 5 ▫ T raction ............................ 2 7 5 m Driving Through W ater .................. 2 7 6 ▫ Flowing/Rising W ater .................. 2 7 6 ▫ Shallow Standing W ater ................. 2 7 6 m Parking Brake ......................... 2 7 8[...]

▫ Compact Spare T ire — If Equipped ......... 3 0 2 ▫ Limited Use Spare — If Equipped ......... 3 0 2 ▫ T ire Spinning ........................ 3 0 3 ▫ T read W ear Indicators .................. 3 0 4 ▫ Life Of T ire ......................... 3 0 4 ▫ Replacement T ires ..................... 3 0 5 ▫ Alignment And Balance ..........[...]

▫ Fuel Filler Cap (Gas Cap) ............... 3 2 3 ▫ Loose Fuel Filler Cap Message ............ 3 2 5 m V ehicle Loading ........................ 3 2 6 ▫ V ehicle Certification Label ............... 3 2 6 ▫ Gross V ehicle W eight Rating (GVWR) ....... 3 2 6 ▫ Gross Axle W eight Rating (GA WR) ......... 3 2 6 ▫ Overloading ...............[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or [...]

Automatic T ransmission The gear selector must be in the “N” (Neutral) or “P” (Park) position before you can start the engine. Apply the brakes before shifting into any driving gear . CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a compl[...]

If Engine Fails T o Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot[...]

After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cor d. The eng[...]

W ARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling [...]

• The electronically contr olled transmission provides a precise shift schedule. The transmission electr onics are self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles. The selec[...]

change the way it shifts to help control the condition. This may result in a slightly dif ferent feeling or r esponse during normal operation in “D” (Drive) position. After the transmission cools down, it will return to normal operation. Brake/T ransmission Shift Interlock System This vehicle is equipped with a brake transmission shift interloc[...]

tab, which can be accessed through a hole inside the bin. While the override is pressed, the shifter can be moved out of the “P” (Park) position without pressing the brake. After operation, return the r ubber storage tray to its original position. 4 Speed Automatic T ransmission Shifting from “D” (Drive) to “P” (Park) or “R” (Revers[...]

Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a flat surface, place the gear selector in the “P” (Park) position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the gear selector in [...]

CAUTION! Damage to the shifter could result if the selector lever is moved out of “P” (Park) before the ignition is turned from the LOCK to ON position. “R” (Reverse) For moving the vehicle rearwar d. Always stop before moving the lever to “R” (Reverse), except when rocking the vehicle. “N” (Neutral) Engine may be started in this ra[...]

NOTE: • If the vehicle is started in cold temperatures, shifts into Overdrive may be delayed. Normal Over drive and shifting operation will resume when the temperatur e of the transmission reaches the appr opriate tempera- ture. Refer to the “Note” under “T orque Converter Clutch” later in this section. • If the transmission temperature[...]

T orque Converter Clutch A feature designed to impr ove fuel economy has been added to the automatic transmission of this vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly dif fer- ent feeling or response during normal operation in high gear . When the vehicle speed drops, or dur[...]

If the problem has been momentary , the transmission can be reset to r egain all forward gears. • Stop the vehicle and shift into “P” (Park). • T urn the key to LOCK then start the engine. • Shift into “D” (Drive) and resume driving. NOTE: Even if the transmission can be reset, we r ecom- mend that you visit a dealer at your earliest [...]

Gear Ranges “P” (Park) “P” (Park) supplements the parking brake by locking the transmission. The engine can be started in this range. Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a flat surface, place the gear selector in the “P” (Park) position [...]

CAUTION! Damage to the shifter could result if the selector lever is moved out of “P” (Park) before the ignition is turned from the LOCK to ON position. “R” (Reverse) Shift into “R” (Reverse) gear only when the vehicle is completely stopped. “N” (Neutral) No power is transmitted from the engine to the drive axle. When the brakes are[...]

“D” (Drive) This range should be used for most city and highway driving. It provides the smoothest upshifts and down- shifts and the best fuel economy . The transmission automatically upshifts through fifth gear . The “D” (Drive) position provides optimum driving characteristics under all normal operating conditions. When frequent transmiss[...]

W ARNING! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Y our vehi- cle’s ABS will not prevent this type of loss of control. Y ou could lose control of your vehicle and have an accident. Delayed Shifts in Cold T emperatures During cold temperature o[...]

5. Restart the engine. 6. Move the selector lever to the desired range. If the problem is no longer detected, the transmission will return to normal operation. NOTE: Even if the transmission can be reset, we r ecom- mend that you visit a dealer at your earliest possible convenience. Y our dealer has diagnostic equipment to determine if the problem [...]

selector lever to the Left (-) triggers a downshift and to the Right (+) an upshift. The gear position will display in the instrument cluster on the transmission range indica- tor . Y ou can shift in or out of the Autostick t mode at any time without taking your foot off the accelerator pedal. If you choose the Overdrive mode, the transmission will[...]

to the right for at least one second. The transmission will now operate automatically , shifting between the five available gears. • Y ou can start out in first or second gear . The system will ignore attempts to upshift at too low of a vehicle speed. • The transmission will automatically downshift to first gear when coming to a stop. • Start[...]

DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the rear wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a dif ference in the surface traction under the r ear (driving) wheels. W ARNING! Rapid acceleration on slippery surfaces is dang[...]

DRIVING THROUGH W A TER Driving through water mor e than a few inches deep will requir e extra caution to ensure safety and pr event dam- age to your vehicle. Flowing/Rising W ater W ARNING! Do not drive on or cross a road or a path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surfac[...]

CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water . [...]

P ARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. W ARNING! Never use “P” (Park) position on an automatic trans- mission as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. When parking on a flat surfac[...]

The brake light in the instrument cluster will turn on when the parking brake is applied and the ignition switch is on. NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a nu[...]

BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. There will be some loss of overall braking effectiveness. This may be evident by increased pedal travel during application, gr eater pedal force r equired to slow or sto[...]

ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow , gravel, bumps, railroad tracks, loose debris, or panic stops. Y ou also may experience the following when the brake system goes into Anti-lock: • The ABS motor running (it may continue to run for a short time after the stop[...]

All vehicle wheels and tires must be the same size and type and tires must be pr operly inflated to produce accurate signals for the computer . Anti-Lock Brake Light The ABS light monitors the Anti-Lock Brake Sys- tem. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the AB[...]

Upon initial start-up in cold weather , the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system. W ARNING! Continued operation with reduced power steering assist could pose a safety ri[...]

TRACTION CONTROL SYSTEM (TCS) — IF EQUIPPED W ARNING! The T raction Control System (TCS) cannot prevent the natural laws of physics from acting on the ve- hicle, nor can it increase the traction afforded. The TCS cannot prevent accidents, including those result- ing from excessive speed in turns, or hydroplaning. Only a safe, attentive, and skill[...]

allow more engine tor que to be applied to the wheel that is not spinning. This wheel slip control is active up to 50 mph (80 km/h). CAUTION! When the ESP/TCS indicator light is illuminated continuously , the ESP is switched off. A void spin- ning one drive wheel. This may cause serious dam- age to the drive train. NOTE: • The T raction Control S[...]

The Brake Assist System (BAS) is standard on vehicles equipped with Electronic Stability Pr ogram (ESP). The BAS is designed to optimize the vehicle’s braking capa- bility during emergency braking maneuvers. The system applies optimum pressur e to the brakes in emergency braking conditions that might otherwise be affor ded solely by the driver’[...]

This system enhances directional contr ol and stability of the vehicle under various driving conditions. The ESP corrects for oversteering and understeering the vehicle by applying the brake of the appropriate wheel. Engine power may also be reduced to assist in counteracting the condition of oversteer or understeer and help the vehicle maintain th[...]

The ESP OFF button is located in the center of the instrument panel. T o turn OFF the ESP , momentarily press the ESP OFF button and the ESP/TCS Indicator Light will illuminate. T o turn the system ON again, momentarily press the ESP OFF button and the indicator light will turn OFF . NOTE: T o improve the vehicle’s traction when driving with snow[...]

Synchronizing ESP The malfunction indicator light for the ESP is combined with BAS indicator . If the power supply is interrupted (battery disconnected or discharged), the ESP/BAS malfunction indica- tor light may illuminate with the engine running. If this should occur , turn the steering wheel completely to the left and then to the right. The ESP[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d ha[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ( ....blank.... ( = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspec[...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tir es as mounted on the vehicle. If t[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Load[...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the avail[...]

ST ARTING AND OPERA TING 297 5[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and r esults in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabili[...]

The pressur e should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pr essure. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under inflated. CAUTION! After[...]

T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important. Increased tir e pressur e and reduced vehicle loading may be requir ed for [...]

Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tires. It is engineer ed to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be r epaired (or r eplaced) and rein- stalled at the first opportunity . W ARNING! T emporary use spare tires are for emerg[...]

original equipped tire on the fr ont or rear axle of your vehicle, but it is not. Installation of this limited use spare tire af fects vehicle handling. Since it is not the same tire, replace (or r epair) the original tire and r einstall on the vehicle at the first opportunity . W ARNING! The limited use spare tires are for emergency use only . Ins[...]

T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the tread is worn to the tread wear indicators, the tir e [...]

W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Pr otect [...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, result- ing in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering a[...]

Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . SELF-SEALING TIRES — IF EQUIPPED A non-hardening viscous sealant applied to the inner liner of each tire fills punctur es up to 0.19 in. (5 mm) to minim[...]

NOTE: In order to avoid damage to tir es, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufactur er’s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufact[...]

Remember , more fr equent rotation is permissible if de- sired. Also, correct for anything causing rapid or unusual wear prior to performing the tire r otation. The suggested rotation method is the “forwar d-cross” shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The T ire Pressur e Monitor System (TPMS) w[...]

pressur e will also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased pr essure. • The TPM System will warn the driver of a low tire pressur e if the tire pr essure falls below the low- pressur e warning limit for any reason, including low temperature ef fects and natural pressur e loss throug[...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause [...]

• Seasonal temperature changes will af fect tire pr essure, and the TPMS will monitor the actual tire pr essure in the tire. Base System — If Equipped The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve [...]

vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to r eceive this information. Check TPMS W arning If a system fault is detected, the T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. If the ignition key i[...]

NOTE: V ehicles with Compact Spare 1. The compact spare tire does not have a tir e pressur e monitoring sensor . Therefor e, the TPMS will not monitor the pressur e in the compact spare tir e. 2. If you install the compact spare tire in place of a r oad tire that has a pr essure below the low-pr essure warning limit, upon the next ignition key cycl[...]

• 3 T rigger Modules (mounted in three of the four wheel-wells) • V arious T ire Pr essure Monitoring System Messages, which display in the Electronic V ehicle Information Center (EVIC) • T ire Pressur e Monitoring T elltale Light The matching full size spare wheel and tir e assembly (if equipped) has a tire pr essure monitoring sensor . The [...]

Should this occur , you should stop as soon as possible, and inflate the tires with low pr essure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pr essure value. Once the system r eceives the updated tire pr essures, the system will automatically update, the graphic display in the EVIC will stop flash- ing, and the[...]

1. Signal interference due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing aftermarket window tinting that contains materials, which may block radio wave signals. 3. Accumulation of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using[...]

Light will remain ON and a chime will sound. In addition, the graphic in the EVIC will still display a flashing pressur e value. 3. After driving the vehicle for up to 10 minutes above 15 mph (25 km/h), the TPM T elltale Light will flash on and off for 75 seconds and then r emain on solid. In addition, the EVIC will display a 9 CHECK TPM SYSTEM 9 m[...]

The tire pr essure sensors ar e covered under one of the following licenses: United States ..................... KR5S120123 Canada ........................ 2671-S120123 FUEL REQUIREMENTS 2.7L Engine The 2.7L engine is designed to meet all emissions regulations and pr ovide excel- lent fuel economy and performance when using high quality unleaded ?[...]

Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer r ecom- mends the use of gasoline that meets the WWFC speci- fications if they ar[...]

Problems that r esult from using methanol/gasoline or E85 Ethanol blends are not the r esponsibility of the manufacturer . While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Metha- nol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline[...]

• The use of leaded gas is prohibited by Federal law . Using leaded gasoline can impair engine performance, and damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of [...]

• Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repair ed, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gase[...]

NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly f[...]

W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground whi[...]

VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “V ehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. If the seatbacks are folded for carrying car go, do not exceed the specified GVWR and GA WR. V ehicle Certification Label Y our vehicle has a certification lab[...]

W ARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicl[...]

A loaded vehicle is shown in the illustration. Note that neither the GVWR nor the GA WR capacities have been exceeded. EXAMPLE ONL Y Front Axle Rear Axle Empty W eight 2054 lbs (932 kg) 1805 lbs (819 kg ) Load (Including driver , pas- sengers, and cargo) 271 lbs (123 kg) 579 lbs (263 kg) T otal 2325 lbs (1055 kg) 2384 lbs (1081 kg) GA WR 2546 lbs ([...]

TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as ef ficiently and safely as possible. T o maintain warranty coverage, follow the requirements and recommendations in this ma[...]

Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles. Distribute the load over the front and r ear axles evenly . Make sure that you do not exceed either front or rear GA WR. W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if eithe[...]

W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars. They ar e typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufactur ers’ directions, it provides for a mor e level ride,[...]

W eight Distributing Hitch System Improper Adjustment of W eight Distributing System 332 ST ARTING AND OPERA TING[...]

T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See your authorized dealer for package content. The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and shou[...]

Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 2.7L & 3.5L Rear Wheel Drive (R WD) Automatic 22 SQ. FT . (2.04 square meters) Up to 2 persons & Luggage 1,000 lbs (454 kg) 100 lbs (45 kg) 22 SQ. FT . (2.04 square meters) Up to 3 persons & Luggage 1,000 lbs (454 kg) 100 lbs (45 kg) 22 SQ. FT . (2.04 squar[...]

NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and it should never exceed the weight refer enced on the “T ire and Loading Information” placard. Refer to “T ire–Safety Information” in this section. T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in [...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the “T ire and Loading Information” placard for the maximum combined weight of occupants and cargo for your ve[...]

• When hauling cargo, or towing a trailer , do not overload your vehicle or trailer . Overloading can cause a loss of control, poor performance, or damage to brakes, axle, engine, transmission, steering, suspen- sion, chassis structur e, or tires. • Safety chains must always be used between your vehicle and trailer . Always connect the chains t[...]

− Also, check the trailer tires for pr oper tire inflation pressur es before trailer usage. − Check for signs of tire wear or visible tir e damage before towing a trailer . Refer to “T ires–General Infor - mation” in this section for information on tread wear indicators and for the proper inspection pr ocedure. − When replacing tir es, [...]

W ARNING! Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake sys- tem and cause it to fail. Y ou might not have brakes when you need them and could have an accident. T owing any trailer will increase your stopping dis- tance. When towing, you should allow for additional space between your vehicle a[...]

The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. 4 - Pin Connector 7 - Pin Connector 340 ST ARTING AND OPERA TING[...]

T owing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away fr om heavy traffic. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the “3” range should be selected. NOTE: Using the “3” [...]

− Extended driving at high RPM should be avoided to prevent excess heat generation. A r eduction in vehicle speed may be requir ed to avoid extended driving at high RPM. Return to a higher gear range or vehicle speed when road conditions and RPM level allows. T owing T ips — Cooling System T o reduce potential for engine and transmission over- [...]

WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 3 4 4 m If Y our Engine Overheats ................. 3 4 5 m Jacking And T ire Changing ................ 3 4 6 ▫ Preparations For Jacking ................ 3 4 7 ▫ Jack Location/Spare T ire Stowage .......... 3 4 8 ▫ Jacking And Changing a T ire ............. 3 5 [...]

HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emer[...]

IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appr opriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in “N” (Neutral), but do not increase engine idle speed. NOTE: There ar e steps that you can take to slow down [...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. JACKIN[...]

Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. A void icy or slippery areas. 2. Set the parking brake and place the gear selector in P ARK. 3. T urn OFF the ignition. 4. T urn on the Hazard W arning Flasher . 5. Passengers should not remain in the vehicle when the vehicle is bei[...]

Jack Location/Spare Tire Stowage The jack and spare tir e are both stowed under an access cover in the trunk. Follow these steps to access the jack and spare tir e. NOTE: The spare tir e must be removed in or der to access the jack. 1. Open the trunk. 2. Lift the access cover using the pull strap. Opening The Access Panel 348 WHA T TO DO IN EMERGEN[...]

3. Remove the fastener securing the spare tire. 4. Remove the spare tire. 5. Remove the fastener securing the jack. Spare T ire Fastener Jack Fastener WHA T TO DO IN EMERGENCIES 349 6[...]

W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. Jacking and Changing a Tire 1. Block the wheel diagonally opposite the flat tire. Passengers should not remain in the vehicle when the vehicle is being jacked.[...]

W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with the metal edges and retention teeth. 4. Before raising the vehicle, use the lug wrench to loosen, but not remove, the lug nuts on the wheel with the flat tire. T urn the lug nuts counter-clockwise one turn while the wheel is still on the ground. 5[...]

Jack Engagement Locations 352 WHA T TO DO IN EMERGENCIES[...]

6. Raise the vehicle just enough to remove the flat tire and install the spare tir e. W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 7. Remove the lug nuts, wheel cover (if equipped), and tire. Remove the cov[...]

W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. Compact Spare Tire The compact spare tir e is for temporary emergency use with radial tires. It is engineer ed to be used on your style vehicle only . Since th[...]

1. Mount the road tire on the axle. For vehicles equipped with wheel covers, perform Steps 2 and 3. For vehicles equipped with center caps, proceed to Step 4. 2. Install two lug nuts on the mounting studs, which are on each side of the stud that is in alignment with the valve stem. Install the lug nuts with the cone shaped end of the nut toward the[...]

correct tightness of each lug nut is 100 ft/lb. (135 N. m). If in doubt about the correct tightness, have them checked with a torque wr ench by your dealer or at a service station. 7. For vehicles equipped with center caps, install the center cap by hand. Do not use a hammer or excessive force to install the center cap. 8. Stow the jack, tools, and[...]

NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals ar e located in the engine compartment for jump-starting. 1. W ear eye protection and r emove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 2. When boost is provided by a battery in another vehicle, park th[...]

6. Connect the other cable, first to the negative terminal of the booster battery and then to the engine ground (-) of the vehicle with the discharged battery . Make sure you have a good contact on the engine ground. Refer to the following illustration for jump-starting connections. W ARNING! • Y ou should not try to start your vehicle by pushing[...]

NOTE: For vehicles equipped with ESP , refer to 9 Syn- chronizing ESP 9 under 9 Electr onic Stability Program 9 in Section 5 of this manual if the ESP/BAS light (in the instrument cluster) r emains on continuously after start- ing the engine of the vehicle with the discharged battery . 8. When removing the jumper cables, reverse the above sequence [...]

CAUTION! • When “rocking” a stuck vehicle by moving be- tween “First” and R (Reverse), do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 35 m[...]

TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Flat towing of vehicles equipped with an automatic transmission, is only permitted within the following limitations: W ith The Ignition Key Y our vehicle may be towed under the following condi- tions: The gear selector must be in “N” (Neutral), the dista[...]

If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transmission remains in “N” (Neutral). TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE WITH A TOW DOLL Y The manufacture does not recommend that you tow this vehicle on a tow dolly . V ehicle damage[...]

MAINT AINING YOUR VEHICLE CONTENTS m 2.7L Engine Compartment ................ 3 6 6 m 3.5L Engine Compartment ................ 3 6 7 m 5.7L Engine Compartment — Except Daytona & R / T ................................ 3 6 8 m 5.7L Engine Compartment — Daytona & R/T . . . 369 m Onboard Diagnostic System — OBD II ........ 3 7 0 ▫ Loose[...]

▫ Maintenance-Free Battery ................ 3 8 1 ▫ Air Conditioner Maintenance ............. 3 8 3 ▫ A/C Air Filter — If Equipped ............ 3 8 4 ▫ Power Steering — Fluid Check ............ 3 8 4 ▫ Front & Rear Suspension Ball Joints ........ 3 8 5 ▫ Steering Linkage ...................... 3 8 5 ▫ Body Lubrication ........[...]

▫ Low Beam Headlight, High Beam Headlight, Park/T urn Light, And Fr ont Side Marker Light .............................. 4 1 3 ▫ Backup Light, Side Marker Light, T ail/T urn Light, And T ail/Stop Light ............... 4 1 5 ▫ License Light ........................ 4 1 8 m Fluids And Capacities ................... 4 1 9 m Fluids, Lubricants, A[...]

2.7L ENGINE COMP ARTMENT 1 — Fuses (Front Power Distribution Center) 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — Coolant Pressur e Cap 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Fill 4 — Coolant Bottle 9 — Remote Jump-Start Positive Battery Post 5 — Power Steering Fluid 10 — W asher Fluid Bottle 366 MAINT AININ[...]

3.5L ENGINE COMP ARTMENT 1 — Fuses (Front Power Distribution Center) 6 — Coolant Bottle 2 — Air Cleaner Filter 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick 4 — Coolant Pressur e Cap 9 — W asher Fluid Bottle 5 — Power Steering Fluid 10 — Remote Jump-Start Positive Battery Post MAINT AINING YO[...]

5.7L ENGINE COMP ARTMENT — EXCEPT DA YTONA & R/T 1 — Fuses (Front Power Distribution Center) 6 — Air Cleaner Filter 2 — Coolant Pressur e Cap 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick 4 — Coolant Bottle 9 — Remote Jump-Start Positive Battery Post 5 — Power Steering Fluid 10 — W ashe[...]

5.7L ENGINE COMP ARTMENT — DA YTONA & R/T 1 — Fuses (Front Power Distribution Center) 6 — Air Cleaner Filter 2 — Coolant Pressur e Cap 7 — Engine Oil Fill 3 — Brake Fluid Reservoir Access Cover 8 — Engine Oil Dipstick 4 — Coolant Bottle 9 — Remote Jump-Start Positive Battery Post 5 — Power Steering Fluid 10 — W asher Fluid[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

odometer reset button to turn of f the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to [...]

5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn of f the ignition key or start the engine. This means that your vehicle’s OBD system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all an[...]

DEALER SERVICE Y our dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any pr ocedure yourself. NOTE: Intentional tampering with emissions [...]

Engine Oil Checking Oil Level — 2.7L, 3.5L Engines T o assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off. Checking the oil while the vehic[...]

Checking Oil Level — 5.7L Engine T o assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off. Checking the oil while the vehicle is on level gro[...]

Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever occurs fir[...]

The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Com- partment” illustration in this section. NOTE: V ehicles equipped with a 5.7L engine must use SAE 5W -20 oil. Failure to do so may result in impr oper operation of the Multiple Di[...]

Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil and oil filters can b[...]

Spark Plugs Spark plugs must fire pr operly to assure engine perfor - mance and emission control. New plugs should be in- stalled at the specified mileage. The entire set should be replaced if ther e is any malfunction due to a faulty spark plug. Malfunctioning spark plugs can damage the cata- lytic converter . Refer to “Fluids, Lubricants, and G[...]

Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic converter will not requir e maintenance. However , it is important to keep the engine properly tuned to assur e proper ca[...]

T o minimize the possibility of catalyst damage: • Do not shut off the engine or interr upt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or f[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. K[...]

Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerants and co[...]

Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar - bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by dealers or other service facilities using recovery and r ecycling equ[...]

W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to insure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. If necessary , add fluid to restore to the pr oper indicated level. W ith a clean cloth, wipe any spilled flui[...]

The external lock cylinders should be lubricated twice a year , preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar t Lock Cylinder Lubricant or equivalent directly into the lock cylinder . Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically wit[...]

The fluid reservoir will hold nearly 1 gallon (4 liters) of washer fluid when the message “Low W asher Fluid” appears in the Electronic V ehicle Information Center (EVIC) — if equipped. W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working arou[...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you se[...]

drain from the coolant r ecovery bottle. DO NOT RE- MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown in the “Maintenance Schedule” in Sec- tion 8 of this manual. If the solution is dirty or contains a considerable[...]

Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before r eplacement. T o prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. P[...]

The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat caus[...]

service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (kilometers)[...]

• Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation. If replacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor [...]

Care should be taken in installing quick connect fittings to insure they ar e properly installed and fully connected. See your authorized dealer for service. Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Suggested service intervals can be found in the “Mainte- nance Sched[...]

necessarily an indication of leakage. Actual dripping of hot fluid when systems are under pr essure (during vehicle operation), should be noted before a hose is replaced based on leakage. • Inspect the brake hoses whenever the brake system is serviced and at every engine oil change. Inspect hy- draulic brake hoses for surface cracking, scuffing, [...]

Use only manufacturer’s r ecommended brake fluid. Re- fer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that may have a lower initial bo[...]

CAUTION! • Using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Ge[...]

All Wheel Drive (A WD) — If Equipped The all wheel drive system consists of a T ransfer Case and Front Dif ferential. The exterior surface of these components should be inspected for evidence of fluid leaks. Confirmed leaks should be repair ed as soon as possible. The transfer case fluid inspection plug is located in the middle of the rear housin[...]

extreme hot or cold weather and other extr eme condi- tions will have an adverse effect on paint, metal trim, and underbody protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corr osion resistance built into your vehicle. What Causes Corrosion? Corrosion is the r esult of deterioration or remova[...]

CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the [...]

Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned r egularly with a mild soap and water to prevent corr osion. T o remove heavy soil and/or excessive brake dust, use Mopar t Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner . Do not use scouring pa[...]

W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and ther efore[...]

1. Clean with a wet soft rag or micro-fiber towel. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fa[...]

FUSES (POWER DISTRIBUTION CENTERS) Fuses (Front Power Distribution Center) A power distribution center is located in the engine compartment. This center contains fuses and relays. Cavity Car- tridge Fuse Mini Fuse Description 1 — 15 Amp Blue W asher Motor 2 — 25 Amp Neutral Powertrain Control Module (PCM) 3 — 25 Amp Neutral Ignition Run/Start[...]

Cavity Car- tridge Fuse Mini Fuse Description 10 30 Amp Pink — W indshield W iper 1 1 30 Amp Pink — Anti-lock Brakes System (ABS) V alves - if equipped 12 40 Amp Green — Radiator Fan 13 50 Amp Red — Anti-lock Brakes System (ABS) Pump Motor - if equipped 14 60 Amp Y ellow — Radiator Fan Cavity Car- tridge Fuse Mini Fuse Description 15 50 A[...]

CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribution Center , and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse havin[...]

Cavity Car- tridge Fuse Mini Fuse Description 1 60 Amp Y ellow — Ignition Off Draw (IOD) 2 40 Amp Green — Integrated Power Mod- ule (IPM) 3— — — 4 40 Amp Green — Integrated Power Mod- ule (IPM) 5 30 Amp Pink — Heated Seats - if equipped 6 — 20 Amp Y ellow Fuel Pump 7— — — Rear Power Distribution Center MAINT AINING YOUR VEHICL[...]

Cavity Car- tridge Fuse Mini Fuse Description 8 — 15 Amp Blue Diagnostic Link Connec- tor (DLC)/W ireless Con- trol Module (WCM)/ W ireless Ignition Node (WIN) 9 — 20 Amp Y ellow Power Outlet 1 0——— 11 * ——— 12 * ——— 13 * ——— 14 — 10 Amp Red AC Heater Control/ Cluster/Security Mod- ule - if equipped 15 — 20 Amp Y ell[...]

Cavity Car- tridge Fuse Mini Fuse Description 27 — 10 Amp Red Occupant Restraint Con- troller (ORC) 28 — 10 Amp Red Ignition Run 29 — 5 Amp Orange Cluster/Electronic Sta- bility Program (ESP) - if equipped/Powertrain Control Module (PCM)/ Stop Light Switch 30 — 10 Amp Red Door Modules/Power Mirrors/Steering Con- trol Module (SCM) 3 1——?[...]

Cavity Car- tridge Fuse Mini Fuse Description 40 — 5 Amp Orange Auto Inside Rearview Mirror - if equipped/ Heated Seats - if equipped/Switch Bank 41 — 10 Amp Red AC Heater Control/ Headlights/T ire Pres- sure Monitoring - if equipped 42 30 Amp Pink — Front Blower Motor 43 30 Amp Pink — Rear W indow Defroster 44 20 Amp Blue — Amplifier - i[...]

CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribution Center , and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse havin[...]

REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Rear Courtesy/Reading Lights .............. W 5 W Rear Compartment (T runk) Light ............. 5 6 2 Overhead Console Reading Lights ............. 5 7 8 V isor V anity Lights ..................... A6220 Glove Box Light ......................... 1 9 4 Door Courtesy .......................[...]

BULB REPLACEMENT Low Beam Headlight, High Beam Headlight, Park/T urn Light, and Front Side Marker Light 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assem- bly on the driver side of the vehicle. 2. T wist the appropriate bulb and socket assembly counter-clockwise, and t[...]

CAUTION! Do not touch the new bulb with your fingers. Oil contami- nation will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 3 — Park/T urn Light Bulb 4 — Side Marker Light Bulb 414 MAINT AINING YOUR VEHICLE[...]

Backup Light, Side Marker Light, T ail/T urn Light, and T ail/Stop Light 1. Open the T runk. 2. Remove two fasteners from the back of the tail light assembly . 3. Pull back the trunk liner . 4. Remove the remaining fastener from the back of the tail light assembly . 5. Push the electrical connector locking tab to the side. 6. Disconnect the electri[...]

7. Pull the tail light assembly clear from the vehicle to access the bulbs. 8. T urn the appropriate bulb and socket assembly counter-clockwise to r emove it from the tail light assem- bly . 1 — Backup Light Bulb 2 — Side Marker Light Bulb 416 MAINT AINING YOUR VEHICLE[...]

3 — T ail/T urn Light Bulb 4 — T ail/Stop Light Bulb MAINT AINING YOUR VEHICLE 417 7[...]

9. Disconnect the bulb fr om the socket assembly and install the replacement bulb. 10. Reinstall the bulb and socket assembly into the tail light assembly , and then turn it clockwise. 1 1. Reinstall the tail light assembly , fasteners, electrical connector , and trunk liner . 12. Close the trunk. License Light 1. Remove the screws securing the lig[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (approximate) 2.7 Liter Engine 18 gallons 68 liters 3.5 Liter Engine without All Wheel Drive 18 gallons 68 liters 3.5 Liter Engine with All Wheel Drive 19 gallons 72 liters 5.7 Liter Engine 19 gallons 72 liters Engine Oil-W ith Filter 2.7 Liter Engine (SAE 5W -20, API Certified) 6.0 qts. 5.7 liters 3.5 Liter [...]

Cooling System * 2.7 Liter Engine (Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile For- mula) or equivalent. 9.9 qts 9.4 liters 3.5 Liter Engine without All Wheel Drive (Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula) or equivalent. 1 1.1 qts 10.5 liters 3.5 Liter Engine with All Wheel Drive (Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil (2.7 Liter) Use API Certified SAE 5W -20 Engine Oil meeting the requirements of DaimlerChrysler Material Standard[...]

Component Fluids, Lubricants, and Genuine Parts Oil Filter (3.5 Liter) Mopar t 05281090 or equivalent. Oil Filter (5.7 Liter) Mopar t 05281090 or equivalent. Fuel Selection (2.7 Liter) 87 Octane Fuel Selection (3.5 Liter) 87 to 89 Octane Fuel Selection (5.7 Liter) 87 to 89 Octane 422 MAINT AINING YOUR VEHICLE[...]

Chassis Component Fluids, Lubricants and Genuine Parts Automatic T ransmission Mopar t A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar t DOT 3, SAE J1703 or equivalent should be used. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. Front Axle API GL-5 SAE 75W90 Synthetic Gear Lub[...]

[...]

MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 4 2 6 m Maintenance Schedule ................... 4 2 6 ▫ Required Maintenance Intervals ........... 4 2 9 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under[...]

• Check the fluid levels of coolant reservoir , brake master cylinder , power steering, and transmission, and add as needed. • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items [...]

Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate the tires. 6,000 10 000 6 If using your vehicle in dusty or off-r oad conditions, inspect the engine air[...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the engine air cleaner filter . 30,000 50 000 30 Inspect the transfer case fluid — All Wheel Drive (A WD). 30,000 50 000 30 Replace the spark plugs on 5.7L engines. 30,000 50 000 30 Change the [...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the spark plugs on 2.7L and 3.5L engines. 102,000 170 000 102 Replace the timing belt on 3.5L engines. 102,000 170 000 102 Change the automatic transmission fluid & filter . 120,000 200 000 1[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 3 4 ▫ Prepar e For The Appointment ............ 4 3 4 ▫ Prepar e A List ........................ 4 3 4 ▫ Be Reasonable W ith Requests ............. 4 3 4 m If Y ou Need Assistance ................... 4 3 4 m W arra[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the deale[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the U[...]

W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of Califor[...]

T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administrator , NHTSA, 400 Seventh Street, SW ., W ash- ington, DC 20590. Y ou can also obtain other information about motor vehicle safety from http:// www .safercar .gov .[...]

• Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer - controlled vehicle systems and featur es. They show exactly how to find and correct pr oblems the first time, using step-by-step troubleshooting and drive[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car . All Passenger Car T ires Must Con[...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe tir[...]

[...]

INDEX 10[...]

About Y our Brakes .................... 278,280 ABS (Anti-Lock Brake System) .............. 2 8 0 Adding Engine Coolant (Antifreeze) .......... 3 9 0 Adding Fuel ........................... 3 2 3 Adding W asher Fluid .................. 132,386 Additives, Fuel ......................... 3 2 1 Adjustable Pedals ....................... 1 3 4 Air Cleane[...]

Auto Down Power W indows ................ 3 5 Auto Unlock, Doors ....................... 3 1 Auto Up Power W indows .................. 3 6 Automatic Dimming Mirror ................. 8 4 Automatic Door Locks ................... 30,31 Automatic Headlights .................... 1 2 4 Automatic Oil Change Indicator .......... 169,178 Automatic T emperat[...]

B-Pillar Location ........................ 2 9 4 Brake Assist System ...................... 2 8 5 Brake Control System, Electr onic ............. 2 8 5 Brake Fluid ............................ 4 2 3 Brake, Parking .......................... 2 7 8 Brake System ........................ 280,394 Anti-Lock (ABS) ....................... 2 8 0 Fluid Check[...]

Checks, Safety ........................... 7 5 Child Restraint .................. 65,66,67,70,72 Child Restraint T ether Anchors ............. 68,70 Child Safety Locks ........................ 3 2 Clean Air Gasoline ....................... 3 2 0 Cleaning Wheels ............................. 4 0 1 W indshield W iper Blades ................. 3 8 6 Cl[...]

Selection of Coolant (Antifreeze) ...... 389,419,421 Corrosion Pr otection ..................... 3 9 8 Cruise Contr ol (Speed Control) .............. 1 3 5 Cruise Light ........................... 1 6 4 Cup Holder ......................... 151,403 Customer Assistance ..................... 4 3 4 Customer Programmable Featur es ............ 1 8 6 Dat[...]

Electrical Power Outlets ................... 1 4 9 Electronic Brake Contr ol System Brake Assist System .................... 2 8 5 Electronic Stability Pr ogram ............... 2 8 6 T raction Control System ................. 2 8 4 Electronic Power Distribution Center (Fuses) .... 4 0 4 Electronic Speed Contr ol (Cruise Contr ol) ...... 1 3 5 Elect[...]

Oil Filter Disposal ...................... 3 7 8 Oil Selection ....................... 376,419 Oil Synthetic ......................... 3 7 7 Operation ............................ 7 4 Overheating .......................... 3 4 5 Starting ............................. 2 5 5 T emperature Gauge ..................... 1 6 5 Engine Oil V iscosity .......[...]

Cooling System ....................... 3 8 8 Engine Oil ........................ 374,375 Power Steering ........................ 3 8 4 T ransfer Case ......................... 3 9 8 Fluids ................................ 4 2 1 Fluids, Lubricants and Genuine Parts .......... 4 2 1 Fog Lights .......................... 126,168 Folding Rear Seat ....[...]

Gasoline, Reformulated ................... 3 2 0 Gauges Coolant T emperature .................... 1 6 5 Fuel ................................ 1 6 4 Odometer ........................... 1 6 9 Speedometer ......................... 1 6 4 T achometer .......................... 1 6 4 Gear Ranges ........................ 262,268 General Information .....[...]

Heated Seats ........................... 1 1 8 Heater ............................... 2 3 9 Heater , Engine Block ..................... 2 5 8 High Beam/Low Beam Select (Dimmer) Switch . . 127 Hitches T railer T owing ........................ 3 3 3 Holder , Coin ........................... 1 5 3 Holder , Cup ........................... 1 5 1 HomeLin[...]

Key , Sentry (Immobilizer) ................... 1 5 Key-In Reminder ......................... 1 5 Keyless Entry System ...................... 2 0 Keys ................................. 1 2 Knee Bolster ............................ 5 0 Lane Change and T urn Signals .............. 1 2 7 Lap/Shoulder Belts ....................... 4 1 LA TCH (Lower Anch[...]

Headlights On W ith W ipers ............ 125,131 High Beam ........................ 127,168 High Beam Indicator .................... 1 6 8 High Beam/Low Beam Select ............. 1 2 7 Illuminated Entry ....................... 2 0 Instrument Cluster .................. 123,164 Intensity Control ....................... 1 2 9 Interior ................[...]

Lower Anchors and T ether for CHildren (LA TCH) ............................ 68,70 Lubrication, Body ....................... 3 8 5 Lumbar Support ........................ 1 1 7 Maintenance Free Battery .................. 3 8 1 Maintenance, General ..................... 3 7 3 Maintenance Procedur es ................... 3 7 3 Maintenance Schedule ...[...]

Occupant Restraints ....................... 4 0 Octane Rating, Gasoline (Fuel) ............ 319,421 Odometer .......................... 164,169 T r i p ............................. 164,169 Oil Change Indicator .................. 169,178 Oil Change Indicator , Reset .............. 169,178 Oil, Engine ......................... 374,421 Capacity .....[...]

Phone, Cellular ..................... 87,209,21 1 Phone, Hands-Free (UConnect™) ........ 87,209,21 1 Placard, T ire and Loading Information ......... 2 9 4 Port Universal Serial Bus (USB) ............. 191,209 U S B ............................. 191,209 Power Brakes .............................. 2 8 0 Deck Lid Release ....................... 3 8[...]

Rear W indow Defroster ................... 2 5 0 Rear W indow Features .................... 2 5 0 Rearview Mirrors ........................ 8 3 Reception, Radio ........................ 1 9 0 Reclining Front Seats ..................... 1 1 6 Recorder , Event Data ...................... 6 3 Recreational T owing ...................... 3 4 2 Reformula[...]

Schedule, Maintenance .................... 4 2 6 Seat Belt Maintenance .................... 4 0 3 Seat Belt Reminder ....................... 4 7 Seat Belts .......................... 40,41,77 Adjustable Upper Shoulder Anchorage ........ 4 6 And Pregnant W omen ................... 4 9 Child Restraint ................... 65,66,67,72 Extender ........[...]

Setting the Clock ................ 192,196,21 1,215 Settings, Personal ........................ 1 8 6 Shifting ............................... 2 5 8 Automatic T ransmission ............ 258,262,267 Shoulder Belt Upper Anchorage .............. 4 6 Shoulder Belts ........................... 4 1 Side Airbag ........................... 52,58 Side Curta[...]

Storage, V ehicle ...................... 248,41 1 Storing Y our V ehicle ...................... 4 1 1 Stuck, Freeing .......................... 3 5 9 Sun Roof .............................. 1 4 6 Sunglasses Storage ....................... 1 3 9 Sunroof Maintenance ..................... 1 4 8 Supplemental Restraint System - Airbag ........ 5 0 Sway [...]

Life of T ires .......................... 3 0 4 Load Capacity ..................... 294,295 Pressur e Monitor System (TPMS) ........... 3 0 9 Quality Grading ....................... 4 4 0 Radial .............................. 3 0 1 Replacement ......................... 3 0 5 Rotation ............................. 3 0 8 Safety ......................[...]

Fluid ............................ 398,423 Maintenance .......................... 3 9 8 T ransmission ........................... 3 9 6 Automatic ................... 258,262,267,396 Fluid ............................... 4 2 3 Range Indicator .................... 262,268 Shifting ............................. 2 5 8 T ransmitter Battery Service (Remo[...]

V ehicle Storage ....................... 248,41 1 V ehicle Theft Alarm (Security Alarm) .......... 1 8 V ideo Entertainment System (Rear Seat V ideo System) ............................... 2 3 0 V iscosity , Engine Oil ................... 376,377 W arning Flasher , Hazard .................. 3 4 4 W arning Lights (Instrument Cluster Description) ...[...]

INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGSAND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS /ALTERATIONS THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Wireless Ignition Node (WIN)Fob with Integrated KeyTip Start FeatureIgnition Key RemovalKey-In-Ignition ReminderSENTRY KEY Replacement KeysCustomer[...]