Electrolux EWF 127570W manuel d'utilisation

user manual Washing Machine Steam System EWF 127570W[...]

Electrolux. Thinking of you. Share more of our thinki ng at www.electrolux.com Contents Safety information 2 Product description 4 Control panel 5 First use 8 Personalisation 8 Daily use 8 Helpful hints and tips 11 Washing programmes 13 Care and cleaning 15 What to do if… 20 Technical data 22 Consumption values 22 Installation 23 Electrical conne[...]

sharp material can cause extensive dam- age and must not be placed into the ma- chine. • Only use the advised quantities of fabric softener and detergen t. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities. • Wash small items such as socks, laces, washable belts etc in a washing bag or [...]

Product description Your new appliance meets all modern requir ements for effective treatm ent of laundr y with low water, energy and detergent consum ption. Its new washing system allows total use of detergent and reduces wate r consumption so saving energy. The STEAM System allows yo u to reduce creases and odou rs from dried laundry with differe[...]

Programme Chart Various programme charts in different lan- guages are supplied with the appliance. One is on the front side of the detergent dispenser drawer and the others are attached into the user manual assy. The chart in the drawer can be replaced easily: remove the chart from the drawer by pulling it towards the right and insert the chart wit[...]

Display 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.12 2.11 2.10 The display shows the following information: 2.1: Temperature value 2.2: Temperature icons , Cold . During the washing cycle the display shows the temperature icon animated to indicate that the appliance ha s started the heating phase of the water in the tub. 2.3: Spin value 2.4: Spin speed[...]

In the event of operating problems, some alarm codes can be displayed, for example (see paragraph «What to do if...»). • Delay Time value 2.10: Soil de gree icons • Intensive • Normal • Daily • Light • Quick • Super Quick • Refresh • Super Refresh (see paragraph «Select Time Manager op- tion»). 2.11: Cloc k icon After the prog[...]

= Delay Start = Start / Paus e = Child safety lock + / - = Time Manager buttons First use • Ensure that the electrical and water connections comply with the installa- tion instructions. • Remove the polystyrene block and any material from the drum. • Before the first wash , run a cotton cy- cle at the highest temperature without any laundry i[...]

Measure out the detergent and the fab- ric softener Pull out the dispenser dr awer until it stops. Measure out the amount of detergent re- quired, pour it into the main wash compart- ment or in the appropriate compartment if the selected programme/option it requires (see more details in «Detergent dispenser drawer»). If required, pour fabric soft[...]

For the compatibility among the washing programmes and the options see chap- ter «Washing Progr ammes». Select the Delay Start by pressing button 7 Before you start th e pr ogramme, if you wish to delay the start, press the button 7 repeat- edly, to select the desired delay. The corre- sponding ic on 2.6 will appear on the displ ay in the upper p[...]

Interrupting a programme Press the button 8 to interrupt a programme which is running, th e corresponding green pilot light starts blinking. Press the button again to restart the pro- gramme. Cancelling a programme Turn the selector dial to to cancel a pro- gramme which is running. You can select now a new programme. Opening the door After the prog[...]

Blood: treat fresh stains with cold water. For dried stains, soak over night in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benz ine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpen- tine, lay the garment on a soft surface[...]

Washing programmes STEAM function Steam can reduce creas es and odours de- pending of the type of textile. Maximum amount of laundry : 1 kg of dried laundry. As at the end of each Steam cycle the laun- dry feel humid, it is better to expose clothes to the open air for about 10 minutes to let the humidity go away. Laundry should be re- moved from th[...]

Programme - Maximum and Min imum Tempera- ture - Cycle Des cription - Maximum Spi n Speed - Maximum Fabrics Load - Type of Laundry Options Deterge nt Compart- ment Drain Draining of wat er Max. load 7 kg For emptying out the w ater of the last rinse in pro- grammes with the option select ed, which ends with water left in th e tub. Spin Drain and lo[...]

STEAM PROGRAMMES for dried laundry 1) Cycle descriptio n Duration Load Steam Cottons This cycle reduces creases and folders in 1-4 cotton shirts (100% cotton fibres) or linen, one pair of jeans. 30 minutes up to 1 Kg Steam Synthetic s This cycle reduces creases in 1-5 synthetic shirts or 1 kg of mixed fabrics in differ ent percentage and up to 1 kg[...]

Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the to p part of the additive compartment should be removed. Clean all parts with water. Clean the chamber of dispenser drawer with a brush. Washing drum Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron[...]

Drain pump The pump sh ould be in spec ted regularly and particularly if: • the appliance does not empty and/or spin; • the appliance makes an unusual noise dur- ing draining due to objects such as safety pins, coins etc. blocking the pump; • a problem with water draining is detected (see chapter “What to do if...” for more de- tails). Wa[...]

7. Remove foreign bodies and fluff from the pump seat and from the pump impeller. 8. Check caref ully whether the pump im- peller rotates (it rotates jerkily). If it doesn’t rotate , pl ease contact your Service Centre. 9. Replace the filter in to the pump by in- serting it correctly into the special guides. Sc rew the pum p cover firm ly by turn[...]

Warning! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Nev er remove the pump cove r during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover , ensure it is securely re-tightened so as to stop leaks and yo ung children being ab[...]

6. When you inte nd to start the machine up again, make sure that the room temper- ature is above 0°C. What to do if… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without ca lling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During mach[...]

Problem Possible ca use/Solution There is water on the fl oor: Too much detergent or unsuitable det ergent (creates too much foam) has been used. • Reduce the detergent quan tity or us e another one. Check whether there are any leaks fr om one of the inlet hose fittings. It is not always easy to see this as the water runs do wn the hose; check to[...]

Problem Possible ca use/Solution After a steam programme, garments are not sufficient- ly smooth. A wrong STEAM programme has been select ed (e.g. Synthetic in- stead of Cotton). • Note the composition of the fabric. Excessive laundry load . • Reduce the laundry load. If you are unable to iden tify or solve the prob- lem, contact our service ce[...]

The consumption data shown on this chart is to be consider ed purely indicative, as it may vary depending on the quan tity and type of laundry, on the inlet water temperature and on the ambient temperature. Installation Unpacking All transit bolts and packing must be re- moved before using the appliance. You are advised to keep all transit devices [...]

5. Open the porthole and remove the poly- styrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Positioning Install the machine on a flat hard floor. Make sure that air circulat ion around the machine is not impede[...]

Water inlet Warning! This appliance must be connected to a cold water supply. 1. Connect the water inlet hose supp lied with the machine to a tap with a 3/4" thread. Always use the hose supplied with the appliance. Important! Do not use the hose from your previous machine to connect to the water supply. 2. The other end of the inl et hose whic[...]

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. Electrical connection Information on the el ectrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domest ic electrical installa- tion can take the maximu[...]

• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed. electrolux 27[...]

132945920 - 00 - 162010 www.electrolux.com[...]