EnGenius Technologies EOC2611P manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 89 pages
- 2.09 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Network Router
EnGenius Technologies ESR-9752
2 pages 0.34 mb -
Network Router
EnGenius Technologies ESR9855G
126 pages 3.07 mb -
Network Router
EnGenius Technologies EOA7530
84 pages 2.07 mb -
Network Router
EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge
27 pages 1.71 mb -
Network Router
EnGenius Technologies ENH500
88 pages 2.18 mb -
Network Router
EnGenius Technologies EAP150
3 pages 0.06 mb -
Network Router
EnGenius Technologies ESR-9710
95 pages 4.34 mb -
Network Router
EnGenius Technologies ECB-1220R
69 pages 1.35 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation EnGenius Technologies EOC2611P. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel EnGenius Technologies EOC2611P ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation EnGenius Technologies EOC2611P décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation EnGenius Technologies EOC2611P devrait contenir:
- informations sur les caractéristiques techniques du dispositif EnGenius Technologies EOC2611P
- nom du fabricant et année de fabrication EnGenius Technologies EOC2611P
- instructions d'utilisation, de réglage et d’entretien de l'équipement EnGenius Technologies EOC2611P
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage EnGenius Technologies EOC2611P ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles EnGenius Technologies EOC2611P et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service EnGenius Technologies en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées EnGenius Technologies EOC2611P, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif EnGenius Technologies EOC2611P, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation EnGenius Technologies EOC2611P. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
E O C26 11P Wi r e l e s s Outdoor Acc es s Po i nt / Client Bridg e User Manual V ersion: 1 .0[...]
-
Page 2
EnGenius E OC261 1P V ersion 1.0 2 Ta b l e of Conten ts 1 INTRODUCTION .......... ............................. ................................. .................................. ......... ........... 6 1.1 F EATURES ................................ ............................................. .......................[...]
-
Page 3
EnGenius E OC261 1P V ersion 1.0 3 5.3.3 S PANNIN G T REE S ETTINGS .............................. ............................................. ..................................... 3 8 5.4 W IRELESS ................... ............................................. ............................................. .................[...]
-
Page 4
EnGenius E OC261 1P V ersion 1.0 4 7.4.2 LAN S ETTINGS .................................................... ............................................. .............................. 77 7.4.3 VPN P ASS T HROUG H .......... ............................................. .............................................. ........[...]
-
Page 5
EnGenius E OC261 1P V ersion 1.0 5 Rev i si on His t o ry Ve r s i o n Date Rem ark 1.0 Dec 15, 2009 Initial Ve rs i o n [...]
-
Page 6
EnGenius E OC261 1P V ersion 1.0 6 1 Introduction EOC 261 1P is a long rang e outdoor wireless Acc ess Poi nt / Client Bridge that opera tes se amlessly in the 2.4GHz frequency sp ectrum and pro vide s hig h bandwidth up to 108Mbps wi[...]
-
Page 7
Security ¾ 802.11i WEP , WP A, WP A2 (Encr yptio n support TKIP /AE S) ¾ MAC address functions MAC addre ss fi lter (AP mode) ¾ 802.1x IEEE802.1x Authen ticatio n ¾ Station isolation Management ¾ F ir[...]
-
Page 8
1.4 Applications The wireless LA N pr oducts are easy to ins tall and highl y efficient. The fol l ow i ng list describe s some of the man y applicatio ns made possible thr ough the power and fle xibil ity of wireless LAN s: ?[...]
-
Page 9
2 Understanding the Hardware 2.1 Hardware Installation 1. Place the unit in an appropriate location after conducting a site survey. 2. Plug one end of the Ether net cable into the Network port of the Po E inje ctor [...]
-
Page 10
EnGenius E OC261 1P V ersion 1.0 10 2.3 Mounting Kits The images below depict the standard mount ing kits. 2.4 IP Address Configuration This devi ce can be configured as a Acce[...]
-
Page 11
EnGenius E OC261 1P V ersion 1.0 11 2. Select Internet Prot ocol (TCP/IP) and then click on the Properties button. This will allow you to configure the TCP/IP settings of your P C/Notebook. [...]
-
Page 12
EnGenius E OC261 1P V ersion 1.0 12 3 Switching Between Operating Modes This devi ce can operate in thre e modes: Access Point, Client Bridge , WDS Bridge , Client Router and Mesh modes. This chapter will describe how to switch be[...]
-
Page 13
EnGenius E OC261 1P V ersion 1.0 13 4 Access Point Operating Mode 4.1 Logging In Afte r logging in you will graph ical user interface (GUI) of the device. The navigation drop ‐ down menu on left is divided into four se ct[...]
-
Page 14
4.2 Status There are thre e opti ons under the Status section of the lef t menu: Main , Wireless Client List , and Syste m Log . Each option is described in detail below. 4.2.1 Main The status that[...]
-
Page 15
EnGenius E OC261 1P V ersion 1.0 15 4.2.2 Wireless Client List This page di spla ys the list of Clients that are associated to th e Access Point. The MAC addresses and signal strength for each client is display ed. Click on[...]
-
Page 16
4.3 System Under the System section of the left menu, you will see the following options: System Prop erties, IP Set tings , and Spanning Tree Settings. Each optio n is described in detail below. 4.3.1 [...]
-
Page 17
4.3.2 IP Set tings This page all ows you to configure th e device with a static IP address or a DHCP client. IP Network Setting : Select Obtain an IP addr ess automatically (DHCP) radio button if [...]
-
Page 18
4.3.3 Spanni ng Tree Setting s Spanning ‐ Tre e Protocol is a link ma nagement protocol that provi des path redundanc y while preventing undesirable loops in the network. Spanning Tree Status : Choose to enable or di[...]
-
Page 19
4.4 Wireless The Wirel ess sec tion of the left men u has the following options: Wirel ess Network , Wireless MAC Filter , WDS Link Settings , and Wireless Advanced Settings . Each option is desc ribed below. 4.4.1 Wire[...]
-
Page 20
EnGenius E OC261 1P V ersion 1.0 20 SSID : Type in yo ur SSID VLAN ID: Specify the VLAN ID to be applied to this SSID. Suppressed SSID: When enabl ed, the SSID will be hidden. Station Separation: When enabled, [...]
-
Page 21
EnGenius E OC261 1P V ersion 1.0 21 ` Wireless Security – Securi ty Mode : WEP `` Security Mode : Select WEP from the drop ‐ down list if your wireless network uses WEP encryption. WEP is an acronym for Wired Equiv[...]
-
Page 22
EnGenius E OC261 1P V ersion 1.0 22 ` Wireless Security – Securi ty Mode : WPA ‐ PSK, WPA2 ‐ PSK, WPA ‐ PSK Mixed `` Security Mode : Select WPA ‐ PSK, WPA2 ‐ PSK, or WPA ‐ PSK Mixed from the drop ‐ down list if your wi[...]
-
Page 23
EnGenius E OC261 1P V ersion 1.0 23 ` Wireless Security – Securi ty Mode : WPA, WPA2, WPA Mixed `` Security Mode : Select WPA , WP A2 or WPA Mixed from the drop ‐ down list if your wireless network uses WPA. WPA ?[...]
-
Page 24
EnGenius E OC261 1P V ersion 1.0 24 4.4.2 Wireless MAC Filter On this page you can filter the MAC address by allowing or blocking acce ss the network . ACL (Access Control) Mode: You may choose to Disable , Allow ?[...]
-
Page 25
EnGenius E OC261 1P V ersion 1.0 25 4.4.3 WDS Link Settings On this page you can set the WDS link to connect to another WDS AP or WDS Br idge. The Maximum connectio n is up to 8 units. Please enter th e MAC Address[...]
-
Page 26
EnGenius E OC261 1P V ersion 1.0 26 4.4.4 Wireless Advanced Settings On this page you can co nfigure the advanced setting s to tweak th e perform ance of your wireles s network. Options available are: data rate , transmit power , fragment[...]
-
Page 27
EnGenius E OC261 1P V ersion 1.0 27 4.5 Management The following options ar e under the Manag ement sect ion of the left menu: Admi nist ratio n, SNMP settings, backu p/rest ore settings, firmw are upg rade, time settings, and log . Each o[...]
-
Page 28
EnGenius E OC261 1P V ersion 1.0 28 4.5.2 Management VLAN This optio n allows you to specify VLAN ID (From 1 to 4095). Caution: If you reconfigure th e Management VLAN ID , you may lose connectivity to the access point. [...]
-
Page 29
EnGenius E OC261 1P V ersion 1.0 29 4.5.3 SNMP Se ttings This option allows you to assign the contact details, location , and community name and trap settings for SNMP. This is a netw orking management protocol used to monitor net[...]
-
Page 30
EnGenius E OC261 1P V ersion 1.0 30 4.5.4 Backup/Restore settings, Reset to factory default setting s This option is used to save th e current settings of the device in a file on your local disk or load settings on to the [...]
-
Page 31
EnGenius E OC261 1P V ersion 1.0 31 4.5.5 Firmware Upgrade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded th e appropriate firmware from your vendor. Click on the Browse button [...]
-
Page 32
EnGenius E OC261 1P V ersion 1.0 32 4.5.7 Log The Log pag e dis plays a list of even ts that are triggered on the Ethernet and Wireless interface. This log can be referred when an unknown error o ccurs on the system or [...]
-
Page 33
EnGenius E OC261 1P V ersion 1.0 33 5 Client Bridge Operating Mode 5.1 Logging In Afte r logging in you will graph ical user interface (GUI) of the device. The navigation drop ‐ down menu on left is divided into four s[...]
-
Page 34
EnGenius E OC261 1P V ersion 1.0 34 the ‘LAN Settings’ section. In the ‘Current Wireless Settings’ section, the operat ion mode, wireless mode, channel/frequency, SSI D, security and distance are d isplayed. [...]
-
Page 35
5.2.2 Connection Stat us Click on the Connection Status link under the Status drop ‐ down menu. This page dis plays the current status of the network, incl uding network typ e, SSID, BSSID, co nnect ion status, wireless m[...]
-
Page 36
EnGenius E OC261 1P V ersion 1.0 36 5.3 System Under the System section of the lef t menu, you will see the follo wing optio ns: System Properties, IP Settings, and Spanning Tree Settings. Eac h opti on is described in d[...]
-
Page 37
5.3.2 IP Setti ngs This page all ows you to configure th e device with a static IP address or a DHCP client. IP Network Setting : Select Obtain an IP addr ess automatically (DHCP) radio button if the[...]
-
Page 38
5.3.3 Spanning Tre e Settings Click on the Spannin g Tr ee link under the Syste m drop ‐ down menu Spanning ‐ Tree Protocol is a link management protocol that provides path redu ndancy while preventing undesira ble loops in ?[...]
-
Page 39
5.4 Wireless The Wireless section of the left menu ha s the follo wing options: Wireless Network, Wireless Security and Wireless Advanced Se ttings . Each opti on is descri bed below. 5.4.1 Wireles s Network The ?[...]
-
Page 40
EnGenius E OC261 1P V ersion 1.0 40 5.4.2 Wireles s Security You can ch ange the wireless security settings may cause this wireless client to associate with a different one. This may tempor arily disrupt your c onfiguration sessio n. [...]
-
Page 41
Wireless Security : WEP Security Mode : Select WEP from the drop ‐ down list if your wireless netw ork uses WEP encryption. WEP is an acronym fo r Wired Equivalent Privac y, and is a security [...]
-
Page 42
Wireless Security : WPA ‐ PSK Security Mode : Select WPA ‐ PS K from the drop ‐ down list if your wireless network uses WPA pre ‐ shared key. Encryption : Select TKIP or AES fr om the drop ‐ down list if [...]
-
Page 43
Wireless Security : WPA2 ‐ PSK Security Mode : Selec t WPA2 ‐ PSK from the dr op ‐ down lis t if your wirele ss network uses WPA2 pre ‐ shared key. Encryption : Select TKIP or AES fr om the drop ‐ down li[...]
-
Page 44
5.4.3 Wireles s Advanced Settings On this page you can co nfigure the advanced setting s to tweak th e perform ance of your wireles s network. Options available are: Data Rate, Transmit Power, Fragmentation Threshold, RTS Thre[...]
-
Page 45
EnGenius E OC261 1P V ersion 1.0 45 5.5 Management The following options are under the Management section of the left menu: Administration, SNMP Settings, Backu p/Resto re Settings, F irmwa re Upg rade, Time Settings , Log and Diagnostics . ?[...]
-
Page 46
EnGenius E OC261 1P V ersion 1.0 46 5.5.2 SNMP Setti ngs This option allows you to assign the contact details, location , and community name and trap settings for SNMP. This is a netw orking management protocol used to monitor net[...]
-
Page 47
EnGenius E OC261 1P V ersion 1.0 47 5.5.3 Backup/Restore settings, Reset to factory default settings This option is used to save th e current settings of the device in a file on your local disk or load settings on to the ?[...]
-
Page 48
EnGenius E OC261 1P V ersion 1.0 48 5.5.4 Firmware Upg rade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded th e appropriate firmware from your vendor. Click on the Browse button ?[...]
-
Page 49
EnGenius E OC261 1P V ersion 1.0 49 5.5.5 Time Settings This page allows you to conf igure the time on the device. You ma y do this manually or by connecting to a NTP server. Manually Set Date and Time : Spe[...]
-
Page 50
EnGenius E OC261 1P V ersion 1.0 50 5.5.7 Diagnostics Click on the Diagnostics link unde r the Manageme nt menu. In this page , user can let unit to ping other network equipment. And user also can monitor a route from unit [...]
-
Page 51
EnGenius E OC261 1P V ersion 1.0 51 6 WDS Bridge Operating Mode 6.1 Logging In Afte r logging in you will graph ical user interface (GUI) of th e device. The navigation drop ‐ down menu on left is divided into four se ct[...]
-
Page 52
EnGenius E OC261 1P V ersion 1.0 52 Firmware ar e displayed in the ‘System Information’ section. IP address, Subnet Mask, De faul t Gateway and DHCP Client are displayed in the ‘LAN Settings’ section. In the ‘Current Wireless Se[...]
-
Page 53
EnGenius E OC261 1P V ersion 1.0 53 6.2.2 WDS Link Status This page displ ays the cu rrent status of the WDS Link , including Sta tion ID, MAC address, Sta tus, RSSI (Received Signal Stre ngth Indicator). 6.2.3 System Log ?[...]
-
Page 54
EnGenius E OC261 1P V ersion 1.0 54 6.3 System Under the Syste m section of the left menu, you will see the fo llowing option s: System Properties, IP Settings and Spanning Tree Settings . 6.3.1 System Proper ties Th[...]
-
Page 55
6.3.2 IP Setti ngs This page allows you to configure the device with a static IP address or a DHCP client. IP Network Setting : Select Obtain an IP addr ess automatically (DHCP) radio button if the ?[...]
-
Page 56
6.3.3 Spanning Tre e Settings Spanning ‐ Tr ee Protocol is a link management protocol that prov ides path redun dancy while preventing undesirable loops in the network. Spanning Tree Status : Choose to enable or di[...]
-
Page 57
EnGenius E OC261 1P V ersion 1.0 57 6.4 Wireless The Wireless section of the lef t menu ha s the following options: Wir eless Ne twork, WDS Link Settings, WDS Security and Wireles s Advanced Se ttings . Each section is described in[...]
-
Page 58
EnGenius E OC261 1P V ersion 1.0 58 6.4.2 WDS Link Settings This page all ows you to setting your WDS device link up to 16 units. MAC Address : you can input the MAC address of WDS devi ce, which yo u [...]
-
Page 59
EnGenius E OC261 1P V ersion 1.0 59 6.4.3 WDS Security Security Mode : Select WEP from the drop ‐ down list if your wireless netw ork uses WEP encryption. WEP is an acronym fo r Wired Equivalent Privac y, and is a security ?[...]
-
Page 60
EnGenius E OC261 1P V ersion 1.0 60 6.4.4 Wireles s Advanced Settings On this page you can conf igure the advanced set tings to tweak th e per formance of yo ur wireless network. Optio ns available are: data rat e, transm it power, fragmentat[...]
-
Page 61
EnGenius E OC261 1P V ersion 1.0 61 6.5 Management The follow ing opt ions are under the Management section of the left menu: Administration, SNMP Settings, Backup/Restore Settin gs, Firmware Upgrade, Time Settings, Log and Diagnostics . E[...]
-
Page 62
EnGenius E OC261 1P V ersion 1.0 62 6.5.2 SNMP Setti ngs This option allows you to assign the contact details, location , and community name and trap settings for SNMP. This is a netw orking management protocol used to monitor net[...]
-
Page 63
EnGenius E OC261 1P V ersion 1.0 63 6.5.3 Backup/Restore settings, Reset to factory default setting s This option is used to save th e current settings of the device in a file on your local disk or load settings on to the [...]
-
Page 64
EnGenius E OC261 1P V ersion 1.0 64 6.5.4 Firmware Upgrade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded the appropriate firmware from your vendor. Click on the Browse button [...]
-
Page 65
EnGenius E OC261 1P V ersion 1.0 65 6.5.6 Log Log page displays a list of events that are triggered on the Etherne t and Wireless interface. This log can be referred when an unknown error occurs on the system or when a[...]
-
Page 66
EnGenius E OC261 1P V ersion 1.0 66 6.5.7 Diagnosti cs In thi s page , user can let unit to ping other network equipment. And user also can monit or a route from unit to your target. Ping Test Pa r[...]
-
Page 67
7 Client Router Oper ating Mode 7.1 Logging In Afte r logging in you will graph ical user interface (GUI) of the device. The navigation drop ‐ down menu on left is divided into four se ctions: 1. Status : Di splays the o[...]
-
Page 68
EnGenius E OC261 1P V ersion 1.0 68 7.2.1 Main The status that is displa yed corresponds with th e operati ng mode that is selected. Information such as Device Name, MAC Address, Country, Cu rrent and Firmware Version are di splay[...]
-
Page 69
EnGenius E OC261 1P V ersion 1.0 69 7.2.3 Connection Stat us This page displa ys the current status of th e network, including network type, SSID, BSSID, connection status, wireless mode, curr ent channel, secu rity, data rate, noise ?[...]
-
Page 70
EnGenius E OC261 1P V ersion 1.0 70 [...]
-
Page 71
EnGenius E OC261 1P V ersion 1.0 71 7.3 Sys tem Under the System section of the left menu, you will see the following opt ions: System Properties setting , which is described below. 7.3.1 System Proper ties This p[...]
-
Page 72
EnGenius E OC261 1P V ersion 1.0 72 7.4 Router Under the Rou ter section of th e left menu, you will see the following op tions: WAN settings, LAN setting s , and VPN Pass Through . Each sect ion is described in detail [...]
-
Page 73
EnGenius E OC261 1P V ersion 1.0 73 7.4.1.2 WAN – Static IP The WAN interfa ce can be configured as Static IP address. In this type of connection, your ISP provides you with a dedicate d IP address (whi ch does ?[...]
-
Page 74
EnGenius E OC261 1P V ersion 1.0 74 7.4.1.3 WAN – PPPoE The WAN interface can be configured as PPPoE. Thi s type of connection is usu al ly used for a DSL service and requires a username and password to con nect. [...]
-
Page 75
EnGenius E OC261 1P V ersion 1.0 75 7.4.1.4 WAN – PPTP The WAN interface can be configured as PPTP. This type of connection is usually used for a DSL service and requires a username and password to con nect. [...]
-
Page 76
EnGenius E OC261 1P V ersion 1.0 76 Domain Name Servi ce : Select Get Au tomatically from ISP if th e ISP will provide the DNS add ress, if not, select Use these DNS ser vers and spec ify the primary and secondary DNS server ?[...]
-
Page 77
EnGenius E OC261 1P V ersion 1.0 77 7.4.2 LAN Settings This page allows you to config ure the LAN interface as IP add ress, IP subnet mask and WINS server IP. When you enable ‘Use Router As DHCP Server’, specify the IP [...]
-
Page 78
EnGenius E OC261 1P V ersion 1.0 78 7.5 Wireless Under the Wi r e l e s s section of the left menu , you will see the foll ow in g options: Wireless Network, Wireless Security, and Wireless Advanced Settings . Each option is described [...]
-
Page 79
EnGenius E OC261 1P V ersion 1.0 79 7.5.2 Wireles s Security 7.5.2.1 Wireless Secur ity : WEP Security Mode : Select WEP from the drop ‐ down list if your wireless netw ork uses WEP encryption. WEP is an acronym fo r Wired Equiv[...]
-
Page 80
EnGenius E OC261 1P V ersion 1.0 80 7.5.2.2 Wireless Secur ity : WPA ‐ PSK, WPA2 ‐ PSK Security Mode : Select WPA ‐ PS K or WPA2 ‐ PSK from the drop ‐ down list if your wireless network uses WPA pre ‐ shared key. ?[...]
-
Page 81
EnGenius E OC261 1P V ersion 1.0 81 7.5.3 Wireles s Advanced Settings On this page you can co nfigure the advanced setting s to tweak th e perform ance of your wireles s network. Optio ns available are: data rat e, transm it power, fragme[...]
-
Page 82
EnGenius E OC261 1P V ersion 1.0 82 7.6 Mana geme nt Under the Manageme nt section of the left menu, you will find the following options: Admi nistration, SNMP Settings, Backup/Restore S ettings, Firmware Upgrade, Time Settings, Log and ?[...]
-
Page 83
EnGenius E OC261 1P V ersion 1.0 83 7.6.2 SNMP Setti ngs This option allows you to assign the contact details, location , and community name and trap settings for SNMP. This is a netw orking management protocol used to monitor net[...]
-
Page 84
EnGenius E OC261 1P V ersion 1.0 84 7.6.3 Backup/Restore settings, Reset to factory default settings This option is used to save th e current settings of the device in a file on your local disk or load settings on to the ?[...]
-
Page 85
EnGenius E OC261 1P V ersion 1.0 85 7.6.4 Firmware Upg rade This page is used to upgrad e th e firmware on the device. Make sure that do wnloaded th e appropriate firmware from your vendor. Click on the Browse button ?[...]
-
Page 86
EnGenius E OC261 1P V ersion 1.0 86 7.6.6 Log Click on the Log lin k under the Management menu. The Log page displays a list of events that are triggered on the Ethernet and Wireless interface. This log can be referred [...]
-
Page 87
EnGenius E OC261 1P V ersion 1.0 87 7.6.7 Diagnostics In thi s page , user can let unit to ping other network equipment. And user also can monit or a route from unit to your target. Ping Test Pa ramete rs : User ?[...]
-
Page 88
EnGenius E OC261 1P V ersion 1.0 88 Appendix A – FCC Interference Statement Fede r al Communication Commissi on Interf erence Sta tement This equip men t has bee n tested and f ound to comply wit h the limit s fo r a Class B dig[...]
-
Page 89
Multi-Function Gig abit Wireless-N C lient Bridge V ersion 1.0 89 Appendix B – IC Statement Industry Cana da stateme nt: This devi ce complies with RSS ‐ 210 of th e Industry Canada Rules. Operation is subject to the f ollow ing two c[...]