Genicom microLaser 210 manuel d'utilisation

Mar 00 Genicom Publ icatio n No. GEG -990 54 GENICOM micr oLaser 210 User Guide[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 ii microLaser 210 User Guid e T rad emarks The following ar e trademarks or reg istere d trademarks of their respective owners. Other pr oduct names mentione d in this manu al may also be tradema rks or r egis ter ed tr ademarks of their r esp ective owne rs. Regi stered trade mark s are r egis tered in t[...]

Mar 00 Genico m Pub lica tio n No. GEG- 99054 Contents Pr eface 1 About this Manual 2 Scope 2 Overview 2 Printe r Orien tation 3 Convention s 3 About the Print er 5 Features 5 Available C onfigurat ions 6 Chapter 1 Getting Star ted 1-1 Safety Precautions 1-2 Handlin g the Printer 1-2 Packag e Cont ents 1-2 CD-ROM Con tents 1-3 Printer Location Requ[...]

Publicati on No. G EG-99054 Genico m Mar 00 iv microLaser 210 User Guid e Par ts o f the Pr inter 1-6 Optional Printer Accessories 1-9 Pape r Path 1 -9 Chapter 2 Using the Pri nter 2-1 Connecting the Printer to t he AC Outlet 2-2 Tu r n i n g P o w e r O n a n d O f f 2 - 3 Connecting the Printer to the Host Comp uter 2-4 Para llel Po rt 2 -4 USB P[...]

Mar 00 Genico m Pub lica tio n No. GEG- 99054 microLaser 210 User Guide v Navigati ng the Contr ol Panel Menus 3-4 Menu Structur e 3-6 Pape r Menu 3-7 Inter face Men u 3-9 PS Menu 3-10 PCL M enu 3- 11 System Menu 3-13 Qual ity Menu 3-15 Functions Menu 3-16 Stat us Menu 3- 17 Chapter 4 Maintain ing the Prin ter 4-1 Upgr ading P rinter F irmw are 4-2[...]

Publicati on No. G EG-99054 Genico m Mar 00 vi microLaser 210 User Guid e Clear ing an E7 Paper Jam 5- 13 Clear ing an E6 Paper Jam 5- 16 Prin t Image Qua lity Problems 5- 18 Other Print Image Qualit y Pr oblems 5-21 Miscellaneous Pr oblems 5-22 Printer is Inoperative 5-22 Printe r Operat es Erra tically 5 -23 Printer Makes Unusua l Noises 5-24 Roo[...]

Mar 00 Genico m Pub lica tio n No. GEG- 99054 microLaser 210 User Guide vii Loading Print M edia 7-12 Loading the A4/Let ter/Legal Paper T ray 7-12 Solving 550 Sheet Feeder Pr ob lems 7-16 Interpreting Paper Feeder Error Messages 7-17 Installation Pr oblems 7-17 Clear ing an E2 Paper Jam 7- 18 Corr ecting Miscellaneous Paper Feed er Pr oblem s 7-19[...]

Publicati on No. G EG-99054 Genico m Mar 00 viii mi cr oLaser 210 Use r Guide Instal ling th e Of fset Catc h T ray 9-3 Removi ng the Offset Catch T ray 9-7 T e s t i n gt h eO f f s e tC a t c hT r a y9 - 1 0 Solvi ng Offset Catch T ray Pr oblems 9-10 Interpreting Of fset C atch T ray Error Messages 9- 11 Installation Pr oblems 9-11 Clearing an Of[...]

Mar 00 Genico m Pub lica tio n No. GEG- 99054 microLaser 210 User Guide ix DRAM, FLASH SIMM and Har d Disk Drive Options A-7 User Publ ication s A-7 Consumab les A-7 Appendix B Safety Notes and Regu latory Complia nce B-1 Safe ty Notes B- 2 Regulat ory Compliance B-2 Safety C ompliance B- 2 EMC Compliance B-3[...]

Publicati on No. G EG-99054 Genico m Mar 00 x microLaser 210 User Guid e[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Pr eface In this Chapter . . .  “W el com e” o n p ag e 2  “ About this Ma nual” on page 2  “A b o u t t h e P r i n t e r ” o n p a g e 5[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2 microLaser 210 User Guid e About th is Manual W elcome Thank you for sel ecting th e GENICOM mi croLaser 210 la ser printer . Th is U ser Guide contains important information about the operation and care of your printer . Please r ead this manual in its entirety and kee p it at hand for later reference.[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3 About th is Manua l Chapter 7: Using the 550-Sheet Feeder This chapter pr o vides all of the informatio n necessary to install, use, and maintain the 550-s heet paper feeder o ption, inclu ding procedures for cleanin g the feede r and removing paper jams. Chapter 8: Using the [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4 microLaser 210 User Guid e About the Printer About the Printer The GENICOM microLaser 210 printer uses a data mo dulated laser beam and conventional dr y-ink xerographic p rocesses to p roduce images up t o 1200d pi resolution at a paper out put speed of 21 pages per minute. The printer can accommodate [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5 About t he Printe r Available C onfigurat ions The mic roLaser 210 is availab le in the f ollowing confi gurati ons: Standar d Configuration - micr oLaser 210 The printer is available in the follo wing standard configuration for table-top use:  Mem o r y : 16 M B  Res ol[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6 microLaser 210 User Guid e About the Printer[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 1 Getting Star ted In this Chapter . . .  “ About this Chapter ” on page 1-2  “P ackage Contents” on page 1-2  “P rinter Lo cation Requirement s” on page 1-3  “P ar ts of the Printer” on page 1-6  “Opt ional P rint er Acce ssor ies” on page 1-9  “P aper P a[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 1-2 micr oLaser 210 User Guide Safety Precautions About thi s Chapter This chapter revie ws the conte nts of the pri nter packaging, ex plains the par ts of the pr inter , and describes the space and env ironment requir ements of the printer . Safety Pr ecautions This printe r is available in ei ther of t[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 1-3 Printer Location R equir ements . CD-ROM Content s The two CD -R O Ms provided wit h your printer inc lude the fo llowing con tents:  microLa ser 210 Elec tronic Libr ar y CD-ROM The micr oLaser 210 E lectr onic Li brary CD-R OM conta ins printe r drive rs, soft ware , an[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 1-4 micr oLaser 210 User Guide Printer Location Requir ements Space Requ ir ements A certain amount of space is r equired for proper operation of the printer and also for performing printe r maint enance a nd replacing cons umables . U se the fo llowing f igures to pl an for app ropriate clearance s when [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 1-5 Printer Location R equir ements Envir onment U se the following guide lines to deter mine the best l ocation for the printer:[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 1-6 micr oLaser 210 User Guide Part s of the Printer Par ts of the Printer The following figures indicate the names and functions of the main part s of the printer . Figure 1-3: Fr ont of th e Printer . Figure 1- 4: Rear of t he P rinter .[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 1-7 Par ts of the Printe r Figure 1 -5: Internal Parts of the Printer (Fr ont). Figu re 1-6: Inte rnal Par ts o f the Pri nter (Re ar). Fr ont Cov er Provides acce ss to the interior of the pri nter . All ows yo u to replace the toner c artr idge or r emove j ammed p aper . To n[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 1-8 micr oLaser 210 User Guide Part s of the Printer Figur e 1-7: Contr ol Panel. LCD Dis pla y Show s error messa ges and other status messages; al so displays menu s, su bmen us, a nd s etting s. LED Indicators Show p rinter status. Pushbuttons Allo w you t o navi gate th r oug h menus, place a prin ter[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 1-9 Optional Printe r Accesso ries Optional Prin ter Access ories The follo wing figur e shows all of the av ailable accesso ries as installed on the printer: Figur e 1-8: Optional Accesso ries. Paper Path The following figure shows the path that p aper travels t hrough the prin[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 1-10 mi cr oLaser 210 Use r Guide Paper Path 5. The paper emerges o nto the output tray , or the offs et output tray if installed. Figure 1- 9: Pap er Pat h.   [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 2 Using the Printer In this Chapter . . .  “ About this Chapter ” on page 2-2  “Connecting the P rinter to the AC Out let” on page 2-2  “T urning P ower On and Off” on page 2-3  “Connecting the P rinte r to the Ho st Computer ” on page 2-4  “S elec ti ng P rint M [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-2 micr oLaser 210 User Guide Connecting th e Printer to the AC Outlet About thi s Chapter This chapter p ro vides information conce rning the daily use of the printer , including proced ures for connecting the printer and loading print media, and guidelines for selecting print media. Connecting the Prin[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-3 Tu r n i n g P o w e r O n a n d O f f T urning Power On and Of f U se the following proc edure to turn the p rinter on: 1. T u rn the printer on by pressing [ I ] on the power switch on the left front o f the printer . The status message “ Loadin g” appears on the displ[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-4 micr oLaser 210 User Guide Connecting the Printer to the H ost Computer Connecting the Printer to th e Host Computer Y ou must connect the printer to your computer using an IEE E 1284 parallel cable or a USB cable. These cable s are user-suppl ied, the p rinter does no t include eithe r of these cab l[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-5 Connecting th e Printer to the Host Compute r 18. Pre s s t h e SEL ECT button to enter the format s ubmenu. 19. Pre s s t h e NE XT bu tton until th e desir ed format is show n on the seco nd line of the display . The avai lable f ormat set tings inclu de Raw , No r m a l ,[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-6 micr oLaser 210 User Guide Connecting the Printer to the H ost Computer Mo st recent Intel syste ms will c ontain the needed c omponents. However , there are a number of older systems that, while having USB hardware, have an obso lete USB implementation. Y our G ENICOM USB p rinter wil l not work with[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-7 Connecting th e Printer to the Host Compute r 9. Ensure that the Spooler settings for t he printer have "Disable bi-directional sup port for thi s printer" ch ecked. 10. Yo u r G E N I C O M U S B p r i n t e r i s n o w r e a d y t o p r i n t . Install ation for [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-8 micr oLaser 210 User Guide Selecting Pr int Media 11. Pre s s t h e NE XT button until the text “ USB Setup” is shown on the se cond li ne of the d is- play . 12. Pre s s t h e SEL ECT button to enter the USB s etup submenu. 13. Pre s s t h e NEXT button u ntil the tex t “ Int er pre te r ” is[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-9 Select ing Print Media  Has staples or paperclips attac hed  I s categoriz e d as thermal pape r , coated paper , or carbon paper  Is an envelope that is embo ssed, is made o f extr emely thick paper , or is padded  Is an envelope that has metal clasps  Is an [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-10 mi cr oLaser 210 Use r Guide Selecting Pr int Media  T ransparencies: 30  Label s: 30  S tandar d P aper: 100  Other paper: S tack Height 11.5mm  Stan da rd P ost c ard: 3 0 NOTE: Expect a slight reduction in image quality when you print on envelopes, labels, transparencies, or postcar[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-11 Loading the Universal P aper T ray Prin t Media Weight, T ype , and Siz e The following table defines print media that you can use in each of the paper sources, and also indi- cates the fee d orientation— long ed ge feed (LEF ) or shor t edge feed (SEF). If you have c onc[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-12 mi cr oLaser 210 Use r Guide Loading the Universal P aper T ray U se the fo llo wing pro cedur e to load pape r into the 550 she et univer sal paper tr ay: 1. Pla ce t he p ape r t ray o n a le vel s ur fa ce . 2. Squeeze the length gui de, lift it up , and sl ide it to the rear o f the tray . 3. I f[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-13 Loading the Universal P aper T ray 4. S queeze th e right widt h guide , lift it up , and slide the guid es to the si des of the t ray . 5. V erify that the plate has droppe d down into the base of the paper tray . If the tray is locked in t h eu pp o t i s i o n ,p u l lt [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-14 mi cr oLaser 210 Use r Guide Loading the Universal P aper T ray 6. Align the edges of the paper and place it i n the center of the pap er tray with the pri nt side down. NOTE: T o avoid pap er ja ms and ot her pa per tra nsportat ion pr oblems, ma ke sur e the length and width guides are adjusted to [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-15 Loading the Front T ray 9. G rasp the paper tray with bo th hands and insert it into the paper tray well on the printer . 10. P ush the paper tray co mpletely into the printer , m aking sure the tray is proper ly seated. 11. U se the paper leve l indicator o n the front rig[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-16 mi cr oLaser 210 Use r Guide Loading the Fr ont T ray  Do not mix print media in the front tray; for example, do not load a stack that includes both envelopes and stand ard paper . Load only o ne type of print media.  Do not mix prin t media siz es in th e fro nt tray; fo r example , do not l o[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 2-17 Loading the Front T ray 4. S tack the paper that you will load in the front tray , m aking sure that the edges are aligned and neat. P ositio n the paper stack so the surface to be p rinted faces up. 5. Load the stack of pap er into the front tray by sliding the stac k betw[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 2-18 mi cr oLaser 210 Use r Guide Loading the Fr ont T ray[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 3 Understanding and Navigating the Contr ol Panel Menus In this Chapter . . .  “ About this Chapter ” on page 3-2  “Control P anel F e atures” on page 3- 2  “N avigating the Control P ane l M enus” on page 3-4  “M enu S tructure” on page 3-6  “P aper M enu” on p[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-2 micr oLaser 210 User Guide Contr ol P anel Feat ures About thi s Chapter This chapter ex plains the control panel and its func tions, and also demonstr ates how to navigate throughout the vario us menus and submenus that allow you to view and change the printer set- tings. Contr o l Panel Features The[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-3 Contr ol Panel Featur es LED Indicators The LED in dicators also indica te printer status. The four ind icators can each be o n, off, or blink- ing, indicating different phases of printer operation. The table below explai ns the LED indicators. Pushbu ttons The control panel[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-4 micr oLaser 210 User Guide Navigating the C ontr ol Pan el Menus Navigati ng the Con tr ol Panel Menus When yo u pres s the ME NU button on the control panel, you enter the printer’ s menu system. At that point, t he first line of the display c ontains the text “ Me n u ”, indicating that you a [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-5 Navigat ing the C ontrol Panel Me nus The following figu re shows the sequence of pushbuttons and display messages that would allow yo u to change the nu mber of cop ies printe d. This exampl e illustr ates th e basic re lationshi p betwe en menus and sub menus and d emonstr[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-6 micr oLaser 210 User Guide Menu Structure Menu Structur e The following figu re sho ws the structure o f the control panel main menu s and submenus. F or more specif ic infor mati on about u sing and n avigati ng the p rinter me nu syst em, see the User Guide pro - vided o n the Electroni c Libr ary C[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-7 Paper Menu Paper Menu The Pa p e r M e n u provid es access to th e printer se ttings for vario us paper- handl ing funct ions. Use t h ef o l l o w i n gp r o c e d u r et oe n t e rt h ep a p e rm e n u : 1. Pre s s t h e MEN U b u t t o no nt h ec o n t r o lp a n e l . 2[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-8 micr oLaser 210 User Guide Paper Menu Media Si ze/T ype This submenu allows you to set th e media size and type for the F r o n tT r a ya n ds e tt h e medi al ty pe fo r all other trays. Fr ont T ray Size: Letter LE F T ype: Plain Tr a y 1 T ype: Plain Tr a y 2 (optional) T ype: Plain Tr a y 3 (optio[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-9 Interface Menu Inter face Menu The Int er f ac e Men u provides access to the print er interface setti ngs. U se the follo wing procedure to enter the interf ace menu: 1. Pre s s t h e MEN U b u t t o no nt h ec o n t r o lp a n e l . 2. Pre s s t h e NE XT button until the [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-10 mi cr oLaser 210 Use r Guide PS Menu PS Menu The PS Menu pro vides access to the P o stScript settings. U se the following procedure to enter the PS M enu: 1. Pre s s t h e MEN U b u t t o no nt h ec o n t r o lp a n e l . 2. Pre s s t h e NE XT button until the text “ PS M e nu ” is shown on the[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-11 PCL Menu PCL Menu The PCL Men u provides access to the PCL sett ings. U se the following procedure to enter the PCL menu: 1. Pre s s t h e MEN U b u t t o no nt h ec o n t r o lp a n e l . 2. Pre s s t h e NE XT button until the text “ PCL M enu ” is sho wn on the se co[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-12 mi cr oLaser 210 Use r Guide PCL Menu Macr o Filter This submenu allows y o ut ot u r nt h e macro filter on or off. Off On Off 1. Press NEXT or PREVIOUS to togg le betw een ON an d OFF . 2. Press SELEC T to save this setting. Lines Per Pag e This submenu allows you to change the number of lines per [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-13 System Menu Syste m Menu The system menu provides access to system settings. Use the following procedure to enter the sys- tem menu: 1. Pre s s t h e MEN U b u t t o no nt h ec o n t r o lp a n e l . 2. Pre s s t h e NEXT button until the text “ Sy st em Men u ” i ss h [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-14 mi cr oLaser 210 Use r Guide System Menu Jam Recov ery T h i ss u b m e n ua l l o w sy o ut ot u r n jam recovery on or of f. On On Off 1. Press NEXT or PREVIOUS to toggle between ON and OFF . 2 . P r e s sS E L E C Tt os a v et h i ss e t t i n g . Hex Print T h i ss u b m e n ua l l o w sy o ut op[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-15 Quality Menu Quality Menu The Quality Menu provides access to the pr inter settings that a re related to print quality . Use the followin g proce dure to en ter the Qua lity Menu: 1. Pre s s t h e MEN U b u t t o no nt h ec o n t r o lp a n e l . 2. Pre s s t h e NEXT butto[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-16 mi cr oLaser 210 Use r Guide Functions Menu Functions Menu The F un ctions M enu pro vides acce ss to sev eral pr inter fu nctions tha t can supp ly you wi th info rma- tion about the printer and its settings. U se the following procedur e to enter the Funct ions Me nu: 1. Pre s s t h e MEN U b u t t[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 3-17 Status Menu Stat us Menu In addition to the main menus listed above, the printer also provides a status menu that allows you to view the c urrent settings for the in put and output trays and the t oner car tridge. U se the follow- ing p rocedure to en ter the Status Menu: 1[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 3-18 mi cr oLaser 210 Use r Guide Status Menu[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 4 Maintaining the Printer In this Chapter . . .  “ About this Chapter ” on page 4-2  “U pgrad ing P rinte r F irmware” on page 4-2  “Replacing P rinter Compo nents” on page 4-3  “Cleaning the P r inter” on page 4-17  “Moving the Printer ” on p age 4- 21  “S[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-2 micr oLaser 210 User Guide Upgrading Printer Firmware About thi s Chapter This chapter p ro vides informatio n about maintaining your printer . Although the p rinter requires very little maintenance, with normal d aily use you will need to per form some routine maintenance procedures, i ncluding repla[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-3 Rep lac in g Prin ter C omp one nt s Replacing Printer Componen ts Repl acing the T oner Cartridge The toner ca rtri dge contai ns the dr y ink as well as the xerogra phic dru m and ass ociat ed compo- nents that create the x erographic image on a sheet of paper . The tone r[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-4 micr oLaser 210 User Guide Replacing Prin ter Components 1. Pla ce a drop -cl oth or some pap er on the ta ble or flo or near th e printe r . 2. P r ess the button on the to p of the printer to o pen the front cover , and pull the cover all the way open. 3. Remo ve the old ton er cartridge from the pr[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-5 Rep lac in g Prin ter C omp one nt s 6. G rasp the toner cartridge firmly and pull the sealing tape straight out from the cartridge. 7. Slide the pegs on the toner cartridge into the channels on the inside of the printer , and lower the ton er cart ridge i nto the pr inte r [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-6 micr oLaser 210 User Guide Replacing Prin ter Components 2. D i s p o s eo fo rr e c y c l et h eu s e dt o n e rc a r t r i d g e . Repl acin g the Fuser The fuser melts the to ner image into the p aper to form a f inished print. The fuser wears with n or- mal use and can leave dirt or marks on pr in[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-7 Rep lac in g Prin ter C omp one nt s 2. Squeeze the tabs on the top of the rear cover , and pull the cover towar d you to open it. 3. Remo ve the screws that secure the fu ser to the printer . 4. G rasp the metal b rackets on t he sides of th e fuser and pull the fuser towar[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-8 micr oLaser 210 User Guide Replacing Prin ter Components 6. Ins ert the new fuser i nto the print er , making sure it is secure ly seated. 7. Secure the fuser to the printer by replaci ng and tight ening the screw s. 8. Close t he rear c ov er .[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-9 Rep lac in g Prin ter C omp one nt s 9. V erify th at the p ower switch o f the prin ter is i n the [O] (o ff) pos ition, th en inser t the pl ug of the power cord into the AC outlet. 10. T u rn the printer on by pressing [ I ] on the power switch on the front of the p rinte[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-10 mi cr oLaser 210 Use r Guide Replacing Prin ter Components 1. T u rn the printer off by pressing the [ O ] on the power switch on the right side of the printer , and disconne ct the AC power cord from th e wall outlet. 2. Remo ve the paper tr ay of the feeder that you intend to rep lace rolls on and [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-11 Rep lac in g Prin ter C omp one nt s 4. U n clip the retaining tabs on the end of the feed roll and nudger roll, and remo ve the rolls from thei r shafts. 5. P us h the new feed roll and nudger rol l onto their shaft s until the re taining tabs cli ck into place. Make sure [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-12 mi cr oLaser 210 Use r Guide Replacing Prin ter Components 6. Release the metal stopper p late inside the printer so it returns to its normal po sition. 7. P r ess the locks on the left and right of the retar d roll inside the paper tray , and lift the lever to open the retard roll cover . 8. U nc li[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-13 Rep lac in g Prin ter C omp one nt s 9. P ush the new retard roll onto the shaft until the retaining tab clicks into place. Make sure the re taining tab is to war d the right sid e of the printer . 10. Cl os e th e re ta rd ro ll c over .[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-14 mi cr oLaser 210 Use r Guide Replacing Prin ter Components 11. G rasp the paper tray with bo th hands and insert it into the paper tray well on the printer . 12. P ush the paper tray all the way into the p rinter , making sure the tray is properly seated. Repl acing the B TR Roller U se the proc edu [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-15 Rep lac in g Prin ter C omp one nt s 2. P ush the button o n top of the printe r to release the front cover , and pull the f ront co ver toward you to open it. 3. Re mov e the t oner cart ridge f rom the pr inte r . NOTE: T o prevent sta ins, place the toner cartridge on so[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-16 mi cr oLaser 210 Use r Guide Replacing Prin ter Components 5. Holding b oth en ds of the BTR roller , p ull it t oward you and lli ft it out o f the pri nter . 6. P osition the ne w BTR roller so the gear is at the right end of the roller . Insert the left end of the shaft into the l eft clip inside [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-17 Cleaning the Printer 8. Insert the peg s on the toner car tridge into the channels insi de the printer , and p ush the toner car tridge i nto th e print er . 9. Close t he front c ov er , pressi ng on the cent er of the co ver until it lo cks firmly i n place. Cleaning the [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-18 mi cr oLaser 210 Use r Guide Cleaning the Printer 1. T u rn the printer off by pressing the [ O ] on the power switch on the right side of the printer , and disconne ct the AC power cord from th e wall outlet. 2. U sin g a soft cloth that i s slight ly damp wit h cold wat er , wipe the pr inter co v [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-19 Cleaning the Printer 4. V erify th at the p ower switch o f the prin ter is i n the [O] (o ff) pos ition, th en inser t the pl ug of the power cord into the AC outlet. 5. T u rn the printer on by p ressing [ I ] on the power switch on the ri ght side of the pr inter . Clean[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-20 mi cr oLaser 210 Use r Guide Cleaning the Printer 1. After removing a paper jam or replacing the toner cartridge, remove any paper scraps from insi de the printer and wipe o ff paper dust w ith a clean, dry cloth.[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 4-21 Moving the Prin ter Moving the Printer F ol low t he g ui de li ne s b el ow wh en l if ti ng o r m ovi ng t he p ri n te r:  The printer is very heavy , and should always be lifted by two people. The weight of the printer wi thout p aper tray , toner cartri dge, and pap[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 4-22 mi cr oLaser 210 Use r Guide Storing the Printer for L ong Periods of Time 6. Remo ve all i nstalled paper-handling options. Refer to Chapters 6 thr ough 10 for instructions for remov ing installed paper- handling options. 7. R e m o v et h et o n e rc a r t r i d g ea n dp l a c ei ti na no p a q u [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 5 T r oubleshooting In this Chapter . . .  “ About this Chapter ” on page 5-2  “Installation P roblems” on page 5-2  “P aper Jams” on page 5-4  “P rint Image Q uality P roblems” on page 5-18  “Mis cellaneous P robl ems” on page 5-22  “W arning Messages and [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-2 micr oLaser 210 User Guide Installati on Pr oble ms About thi s Chapter This chapter d escribes the problems that you may encounter when using your p rinter , and provides proce dure s for res olving the pr oblems. Th is chapter als o lists the warning and err or messag es that appear on the c ontrol [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-3 Installation Problems Inoperat ive Pri nter If you hav e problems turning on the printer , check the possible causes listed in the table below . If the printer will not start after c hecking these ite ms, turn the printer of f, disconnect the power cord from the AC outlet, a[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-4 micr oLaser 210 User Guide Paper Jams 1. Ref er to the pictor ial unpacking s heet and the Instal lation G uide inc luded in the print er packaging and make sure you hav e remov ed all shipping spacers and pr otective tape from the insi de of the pr inte r , the paper tray s, and th e toner ca rtridge[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-5 Pap er Jam s F ig u re 1 - 4 : P a p e r J a m Lo c a t i o ns a n d E r ror C od e s . The most common c auses of paper jams are:  The printer is not p laced on a level surface.  The print medi a does not c onform to the sp ecific ations.  The pape r is not loa ded[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-6 micr oLaser 210 User Guide Paper Jams Clear ing an E2 Paper J am If an E2 er ror code p r ecedes the er ro r message on the f irst l ine of the cont rol pane l display , paper has jammed som ewhere between the feed area and the registration sensor . Use the following proc e- dure to clear a pap er jam[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-7 Pap er Jam s 4. Remo ve any jammed or wrinkled paper from the paper tray . 5. Remo ve any jammed paper from the inside of the paper tray well. 6. If the jam occurred while feeding f rom T ray 2 or 3, remo ve the paper tray associated w ith that feeder and remo ve any jammed [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-8 micr oLaser 210 User Guide Paper Jams 8. Insert each paper t ray into the appropriate paper tray well, either o n the optional feeder or on the printer . 9. If the front tray is open, close it. Then pull on the rec essed area on the front cover to open it. 10. Return the front cover to its o riginal p[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-9 Pap er Jam s 2. Remo ve all paper from the front tray . 3. P r ess the button on the to p of the front cover to release the cover , and open the front cover . 4. Re mov e the t oner ca rtridge f rom th e insi de of the p rin ter . NOTE: T o pr event sta ins, place t he toner[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-10 mi cr oLaser 210 Use r Guide Paper Jams 6. Insert the pegs o n the sides of the tone r cartridge into t he channels on the inside o f the prin ter , and pu sh the ca rtridge i nto t he prin ter . 7. Close th e front cover , pressing on the cen ter of the front cover until it clo ses securely . Cleari[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-11 Pap er Jam s 2. S queeze t he tabs on t he top r ear of t he print er and p ull the r ear co ver towar d you to open it . 3. If there is paper jammed in the space behind the rear cover , remove it. 4. If you are using the duplexer , push th e green tabs toward the center of[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-12 mi cr oLaser 210 Use r Guide Paper Jams 5. If there is paper jammed around the fuser unit, lift up the fuser unit r elease levers on the left and right sides of the fu ser and remo ve the jammed pape r . 6. Ret urn the fuser r elease le vers to the ir original position. 7. If you removed the duple xe[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-13 Pap er Jam s 9. Close t he rear c ov er . Clear ing an E7 Paper J am When an E7 erro r message is shown on the disp lay screen, there is a paper jam in the d uplexer . U se the followi ng procedure to clear a du plex pape r jam: 1. If you are using the pap er tray in i ts e[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-14 mi cr oLaser 210 Use r Guide Paper Jams 3. Remo ve any jammed paper from the duplex area. 4. P ush the green tabs on th e sides of the duplexer toward the center of the dup lexer , and gras p the recessed areas on the si des of the duplexer and remove it from the printe r . 5. P ush the tabs labelled[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-15 Pap er Jam s 6. Remo ve any jammed paper from inside the duplexe r unit. 7. Slide t he tabs on the left and right sides of the duplexer into the channels inside the printer , and push the dup lexer completely into the p rinter . 8. P ush the green tabs on th e sides of the [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-16 mi cr oLaser 210 Use r Guide Paper Jams 9. Close t he rear c ov er . Clear ing an E6 Paper J am If an E6 er ror code p r ecedes the er ro r message on the f irst l ine of the cont rol pane l display , paper has ja mmed at th e offset c atch tra y . Use the foll owing pro cedure to clea r a pape r jam[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-17 Pap er Jam s 3. Close t he rear c ov er of the offs et catch tr ay. 4. Squeeze the latch on the upper part o f the rear co ver , and pull the cover to ward you to open it. I f there is paper jamm ed in the space behi nd the rear cover , remove it. NOTE: If the paper tr ay i[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-18 mi cr oLaser 210 Use r Guide Print Image Quality Pr oblems Print Image Qu ality Pr oblems When fun ctioning correct ly , the pr inter should produc e printed p aper that is relatively flat and undamaged, containing a fused image of correct intensity—without streaks, smears, spots, or miss- ing area[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-19 Print Image Quality Pr oblems V er tical black streaks T h et o n e rc a r t r i d g ei so l do r dama ged. Replace the to ner cartridge. Repetitive defects The p aper p ath is di rt y . T h et o n e rc a r t r i d g ei so l do r dama ged. Print out several blank sheets. Re[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-20 mi cr oLaser 210 Use r Guide Print Image Quality Pr oblems Black page T h et o n e rc a r t r i d g ei so l do r dama ged. The high-voltage power supply ma y be def ective. Replace the toner cartridge. C o n t a c ty o u rd e a l e ro ra na u t h o r i z e d service pr ovider . Blank page T h es e a [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-21 Print Image Quality Pr oblems Other Print Image Qual ity Pr oblems The following ch aracteri stics def ine this print ima ge problem:  The finished pri nt has a problem that is not identi fied by any of the other proced ures in this manual. Plotted prin t The print media[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-22 mi cr oLaser 210 Use r Guide Miscellaneous Pro blems  The control panel do es not display an erro r code. The follo wing proc edur e guides you thr ough multipl e actions that may solv e this print image qual- ity problem. P roceed one s tep at a ti me until the problem is s olved—you m ay not n[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-23 Misc ella neous P r oble ms  The printer motors do not run and the printer doe s not warm up.  The con tro l pan el doe s not di spla y an err or code. The follo wing proc edur e guides you thro ugh multiple actio ns that may solve this pri nt image qual- ity problem.[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-24 mi cr oLaser 210 Use r Guide Miscellaneous Pro blems A loose or p artia lly con nec ted A C pow er cor d ma y cause erra tic ope ra tion. If the A C pow er cor d is r epeated ly loose o r disconnec ted, y ou may co nsider mo ving t he printe r to a safer loca- tion. If the AC wall outl et is broken, [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-25 Misc ella neous P r oble ms Bro ken and dangling components or scraps of paper lodged inside the printer may be br ush- ing aga inst moving pa rt s and caus ing the no ise. 2. Inspect the fan outlets f or broken grills or objects stuck in the fans. Remove any objects from t[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-26 mi cr oLaser 210 Use r Guide W arning Me ssages and Er r or Messa ges 1. If the radio/televisio n is plugged into the same AC wall outlet as the pri nter , plug either the printer or the rad io/television int o another AC outlet. Electrical noise may be transmitte d through the AC lin e. Y ou can red[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-27 W arning Me ssages and Error Messag es Wa r n i n g M e s s a g e s The fol lowi ng table li sts warnin g messages , possible cau ses, and the actio ns req uire d to corre ct each cause. Wa r n i n g M e s s a ge Line 2 of display Possible Cause Action Paper O ut T ray 1 Th[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-28 mi cr oLaser 210 Use r Guide W arning Me ssages and Er r or Messa ges Err or Messages The tabl e below lists erro r messag es, the p ossible c auses o f each error , an d the act ions requi red to rec ove r fr om e ac h er ro r . Err or Mes sage Line 1 Err or Message Line 2 Possible Cau se Actio n E2[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 5-29 W arning Me ssages and Error Messag es    U2 ROS F A ILURE C all Service The ROS has fai led. T urn the printer off , then turn it on. If the pr oblem r eoccurs, contact an authorized service provide r . U4 FUSE R F AI LURE Call Service The fuser has failed. ENV UN[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 5-30 mi cr oLaser 210 Use r Guide W arning Me ssages and Er r or Messa ges[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 6 Using t he Dupl exer In this Chapter . . .  “ About this Chapter ” on page 6-2  “ About the D uplexe r” on page 6-2  “Installi ng the Duplexer” on page 6-2  “ T esting the Duplexer” on page 6-4  “Solving Duplexer Problems” on page 6 -6  “Remo ving the Dup[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6-2 micr oLaser 210 User Guide About t he Dupl exer About thi s Chapter This chapter pro vides all of the information necessary to install, use, and maintain the duplexer . About the Du plexer The duplexer is a c ustomer-installed op tional dev ice that enables automat ic printi ng on both sid es of a she[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 6-3 Installi ng the Duplexer 1. T u rn the printer off and remove the AC plug from t he AC wall outlet. 2. If you are using the pap er tray in i ts extended po sition, remove the paper tr ay from the printer . 3. Squeeze the tabs on the left rear of the printe r and pull the rea[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6-4 micr oLaser 210 User Guide T estin g the Dupl exer 4. Slide t he tabs on the left and right sides of the duplexer into the channels inside the printer , and push the dup lexer completely into the p rinter . 5. P ush the green tabs on th e sides of the duplexer o ut towar d the sides of the printer to [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 6-5 Te s t i n g t h e D u p l e x e r 2. Once the printer has warmed up and displays the “ Rea dy ” me ssage on the con trol panel dis- play , use any software application to print a few duplexed sheets. 3. If the duple xer does not tr anspor t paper or if the co ntrol pane[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6-6 micr oLaser 210 User Guide Solving D uplexe r Pr oblems Solving Dup lexer Pr oblems When the re is a problem with th e duple xer , the prin ter control panel displays an error code and error message. M ost duplexer error codes indicate rou tine status conditions such as a paper tray running ou t of pa[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 6-7 Solv ing Du pl exer Pr oblem s If the printer is no t operational afte r you have removed the duplexer , refer to Chapte r 5: T roubleshooting . After correcting the pr inter problem, return to “Install ing the Duplex er” on page 6-2 and reinstall the duplexer . Clearing[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6-8 micr oLaser 210 User Guide Solving D uplexe r Pr oblems 3. Remo ve any jammed paper from the duplex area. 4. P ush the green tabs on th e sides of the duplexer toward the center of the dup lexer , and gras p the recessed areas on the si des of the duplexer and remove it from the printe r . 5. P ush th[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 6-9 Solv ing Du pl exer Pr oblem s 6. Remo ve any jammed paper from inside the duplexe r unit. 7. Slide t he tabs on the left and right sides of the duplexer into the channels inside the printer , and push the dup lexer completely into the p rinter . 8. P ush the green tabs on t[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6-10 mi cr oLaser 210 Use r Guide Solving D uplexe r Pr oblems 9. Close t he rear c ov er . Corr ecting Miscellaneous Duplex er Pr oblems Some du plexer problems may not cause an error message and may not i nterfere with the operation of the printer . If you are experiencing one of the problems listed bel[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 6-11 Solv ing Du pl exer Pr oblem s If the connection between the d uplexer and the printer is not intact, the duple xer will n ot receive power or logic comm ands, re sulting in an in opera tive duplexer 4. Examine the printer driver settings to make s ure the duplexer is avail[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6-12 mi cr oLaser 210 Use r Guide Solving D uplexe r Pr oblems Duplex Makes Unusual Noises The fo llowing ch aracteri stic s define t his du plexer prob lem:  The dupl exer makes unus ual noises o r makes mor e noise than u sual ei ther while idl e or while printing.  The duplexer f eeds paper witho[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 6-13 Remov ing th e Duple xer Rem ovin g the Dup lex er U se the followin g procedure to remove the dupl exer: 1. T urn off the prin ter and disc onnect t he AC power cord from th e AC wall out let.. 2. If you are using the pap er tray in i ts extended po sition, remove the pape[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 6-14 mi cr oLaser 210 Use r Guide Removin g the Dupl exer 4. P ull the duplex unit towar d you while sliding the left and right tabs inward, then grasp the re cessed areas on t he side s of the dupl ex unit and re mo ve i t from th e printer . 5. Close t he rear c ov er .   [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 7 Using the 550 Sheet Feeder In this Chapter . . .  “ About the 550 S hee t F eede r” on page 7-2  “Installi ng the 550 Sheet P aper F eeders” on page 7-3  “ T esting the 550 Sheet F eeder” on page 7-11  “S elec ti ng P rint M edi a” on pa ge 7-1 1  “Loading P rin[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-2 micr oLaser 210 User Guide About t he 550 Sheet F eede r About thi s Chapter This chapter pro vides all of the information necessary to install, use, and maintain the 550 sheet paper feeder o ption, includ ing procedures for cleanin g the feede r and remo ving paper jams . About the 550 Sheet Feeder T[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-3 Instal ling the 550 Sh eet Paper Feede rs Installing the 550 Sheet Paper Feeders Bef ore instal ling th e paper feeder (s) , verify t hat you hav e rec eiv ed the foll ow ing items in the pape r feede r ship ping box : Installing One Paper Feed er U se the fo llow ing proce [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-4 micr oLaser 210 User Guide Install ing the 55 0 Sheet Pape r Feeder s 3. T u rn the printer of f by pressing [ O ] on the power switch on t he left front of the unit. NOTE: Installing t he paper feeder while the printer is on may da mage the printer or paper feeder . 4. Disconnect the power cord from [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-5 Instal ling the 550 Sh eet Paper Feede rs 6. Remo ve the main paper tray from the printer . 7. Align the holes on the bot tom of the pri nter with the pegs o n the paper fee der , and lower the printer ont o the paper feeder . NOTE: Be su r e to lower the printer gen tly . C[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-6 micr oLaser 210 User Guide Install ing the 55 0 Sheet Pape r Feeder s 10. Insert the feeder paper tray and the main paper tray all the way into the paper feeder , making sure each is prop erly seated ins ide the printer . 11. Insert the plug of the power c ord into the AC outlet, and turn the prin ter[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-7 Instal ling the 550 Sh eet Paper Feede rs 2. Pla ce one pa per fee der on a st ur dy , lev el surf ace. NOTE: Do not move the printer when the p aper feeder is installed . 3. Align the three holes on the b ottom of the upper feeder with the th ree stubs on the lower feeder ,[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-8 micr oLaser 210 User Guide Install ing the 55 0 Sheet Pape r Feeder s 5. T u rn the printer of f by pressing [ O ] on the power switch on t he left front of the printer . 6. Disconnect the power cord from the AC outlet and from the printer . NOTE: Installing t he paper feeder while the printer is on m[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-9 Instal ling the 550 Sh eet Paper Feede rs 8. Remo ve the main paper tray from the printer . 9. Lift the printe r and lower it onto the two stacked paper f eeders, ali gning the pegs on the upper paper feed er with the ho les on the b ottom of the p rinter . NOTE: Be su r e t[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-10 mi cr oLaser 210 Use r Guide Install ing the 55 0 Sheet Pape r Feeder s 11. Load pa pe r into th e pape r tray s for bo th paper f eed ers. 12. Insert the pap er trays all the way into the paper feed ers, making sure each tr ay is proper ly seated . 13. Connect the AC power cord to the p rinter and t[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-11 T esti ng the 550 S heet Fee der NOTE: If an error message appe ars on the contr ol panel display , se e the Chapter titled “Err or Message s” in the User Ma nual. T esting the 550 Sheet Feeder After installing the 550 sh eet paper feede r , use the following test proc [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-12 mi cr oLaser 210 Use r Guide Loading Print Me dia  S tor e re ams of pap er in an ar ea away fr om bot h dire ct sunli ght and high h umidity  Open sealed reams only when you are ready to load the paper into th e paper tray , and always close and se al p artia l ream s of pap er .  Do n ot s[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-13 Loading P rint Media U se the fo llo wing pro cedur e to load pa per into the 550 sheet A4/let ter/l egal paper tr ay: 1. Pla ce th e p ape r t ray on a l evel su r fa ce. 2. Squeeze the length gui de, lift it up , and slide it to the r ear of the tray . 3. I ft h ep a p e [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-14 mi cr oLaser 210 Use r Guide Loading Print Me dia 4. S queeze th e right w idth guide , lift it up , and slide the guid es to the si des of the t ray . 5. V erify that the plate has droppe d down into the base of the paper tray . If the tray is locked in t h eu pp o t i s i o n ,p u l lt h el e v e r[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-15 Loading P rint Media 6. Align the edges of the paper and place it i n the center of the pap er tray with the pri nt side down. NOTE: T o avoid pap er ja ms and ot her pa per tra nsportat ion pr oblems, ma ke sur e the length and width guides are adjusted to match the paper [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-16 mi cr oLaser 210 Use r Guide Solvin g 550 Sheet Feeder Pr oblems 9. G rasp the paper tray with bo th hands and insert it into the paper tray well on the printer . 10. P ush the paper tray complete ly into the printer , mak ing sure the tray is proper ly seated.. 11. U se the paper leve l indicator o [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-17 Solving 550 Sheet F eeder Pr oblems  If the paper feeder is inoperative after install ation, refer to “I nstallation P roblems” on page 7-17 and co mplete the recommended p rocedure.  If the printer contro l panel displays an error message o r an error code, refer[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-18 mi cr oLaser 210 Use r Guide Solvin g 550 Sheet Feeder Pr oblems 1. T u rn the pri nter off by pressing the [ O ] on the power swi tch on the ri ght side of t he print er . 2. Remove and then reinstall the feeder . 3. If the feeder is still ino perative after reinstallation, remo ve it from the print[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-19 Solving 550 Sheet F eeder Pr oblems 4. P ush the paper trays back into the p rinter and optional feeders. Corr ecting Miscellaneous Paper Feeder Pr oblems Some paper feeder problems may not cause an error message and may no t interfere with the oper a- tion of the p rinter [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-20 mi cr oLaser 210 Use r Guide Solvin g 550 Sheet Feeder Pr oblems 4. If the 550 shee t feeder is corr ec tly set as an installed optio n, reload the pr inter driv er softw are. The printer driver software running on the host computer may be damaged. Reinstal ling the soft ware is an ea sy and ine xpen[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-21 Maintaining the 550 Sheet Fee der 1. Remove the paper tra ys and insp ect the i nside of the feed er for ja mmed pa per or obv iously broke n components. Broken components or scraps of pap er lodged inside the feeder may be bru shing against mov- ing parts and causing the n[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-22 mi cr oLaser 210 Use r Guide Maintaining the 550 Shee t Feeder 2. Remo ve the paper tray o f the feeder that you inte nd to clean and set it on a f lat level surface. 3. P ull the metal stoppe r plate down. 4. U nclip the retaining tabs on the end of the feed roll and nudger roll, and remov e the rol[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-23 Maintaining the 550 Sheet Fee der 5. P us h the new feed roll and nudger rol l onto their shaft s until the re taining tabs cli ck into place. Make sure the tabs are toward the right side of the print er . 6. Release the metal stopper p late inside the prin ter so it return[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-24 mi cr oLaser 210 Use r Guide Maintaining the 550 Shee t Feeder 7. P r ess the locks on the left and right of the retar d roll inside the paper tray , and lift the lever to open the retard roll cover . 8. U nc lip the retaining tab o n the retard roll and remo ve it from the shaft.[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-25 Maintaining the 550 Sheet Fee der 9. P ush the new retard roll onto the shaft until the retaining tab clicks into place. Make sure the re taining tab is to war d the right sid e of the printer . 10. Cl os e th e re ta rd ro ll c over .[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-26 mi cr oLaser 210 Use r Guide Removin g the 550 Shee t Feede r 11. G rasp the paper tray with bo th hands and insert it into the paper tray well on the printer . 12. P ush the paper tray all the way into the p rinter , making sure the tray is properly seated. Removing the 550 Sheet Feeder U se the fol[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-27 Removin g the 550 Shee t Feede r 2. Disconnect the power cord from the AC outlet. 3. Close the fro nt tray and remove any printed sheets from the paper output tray . 4. Remove the paper trays from the 550 sheet feeder and the p rinter . CAUTION: Removing or installing the p[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-28 mi cr oLaser 210 Use r Guide Removin g the 550 Shee t Feede r 5. Remove the three screws that secure the printer to the paper fee der . 6. Lift the pr inter to remove it from the feede r .[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 7-29 Moving the 550 Sheet Fee der Moving the 550 Sheet Feeder When moving the pri nter a shor t distance, you may leave the 550 s heet paper f eeder attached. Ho wever , when moving the pri nter a long dis tance, please remove the 550-sh eet paper fe eder to avoid damaging eithe[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 7-30 mi cr oLaser 210 Use r Guide Moving the 550 Sheet Fee der[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 8 Using the Envelope Feeder  “ About this Chapter ” on page 8-2  “ About the Envel ope F eeder” on page 8 -2  “Installing the Envelope Feeder” on page 8-2  “ T esting the Envelo pe F eed er” on page 8-4  “S elec ti ng P rint M edi a” on pa ge 8-4  “Loading [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 8-2 micr oLaser 210 User Guide About t he Env elope Fe eder About thi s Chapter This chapter pro vides all of the information necessary to install, use, and maintain the envelope feede r , inc luding p rocedures fo r removing paper jams. About the Env elope Feeder The Envelope F eeder is an o ptional sing[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 8-3 Installing t he Envelope Feeder NOTE: Installing t he envelope feeder while the printer is on may d amage the printer or the envelope feeder . 2. R e m o v et h ee n v e l o p ef e e d e rf r o mi t sp a c k a g i n ga n dp l a c ei to nal e v e ls u r f a c e .R e m o v ea [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 8-4 micr oLaser 210 User Guide T estin g the Envel ope F eeder 4. Remove the gear co ver on the left side of the in side of the pr inter and store it in a s afe place. 5. P ush the en velope f eeder all th e way int o the prin ter until it stop s, makin g sure it is s eated firml y insi de the pr inter . [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 8-5 Select ing Print Media Paper and Print Media T o Avoid Do not use paper or print m edia t hat has an y of the fo llowing chara cteris tics:  Does not meet the pap er and media s ize and weight specificati ons for th is printer  Is not labeled fo r use with xerographic [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 8-6 micr oLaser 210 User Guide Loading th e Envelope Fee der Loading the Env elope Feeder U se th e follo wing pr ocedu re to load envel opes into t he enve lope fe eder: 1. If you are planning to u se large size envel opes, pull ou t the extensi on at the end of the paper tray . 2. Lift up the p aper hol[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 8-7 Solv ing E nv elo pe Fe ede r Pr oblem s 3. L o w e rt h ep a p e rh o l d e r . 4. Adjust the paper gui de to the size of the envelopes or postc ards you are using. Solving Enve lope Feeder Pr oblems When the re is a problem with th e envelope feed er , t he printer con tro[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 8-8 micr oLaser 210 User Guide Solvin g Envelop e Feeder Pr oblems 1. If you are using the paper tr ay in its extended positi on, remov e it from the p rinter . 2. Squeeze the tabs on the rear cover and pull the co ver towar d you to open i t. 3. 4. Lift up the fuser re lease lev ers at th e left and righ[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 8-9 Solv ing E nv elo pe Fe ede r Pr oblem s 5. Remo ve the caps (green) on the inside of the r ear cov er at the left and right. 6. S tor e the caps in the hol es p ro vi ded on th e inside o f the r ear co v er . 7. Close t he rear c ov er .[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 8-10 mi cr oLaser 210 Use r Guide Solvin g Envelop e Feeder Pr oblems Interpreting Envelope Feeder Erro r Messages The printer control p anel displays error mess ages when there is a problem with the pri nter or any of the optional paper- handling components. The following table lists all of the error mes[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 8-11 Solv ing E nv elo pe Fe ede r Pr oblem s If y ou can not pr int a she et of p aper fr om th e main tra y and th e print er doe s not disp lay an[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 8-12 mi cr oLaser 210 Use r Guide Solvin g Envelop e Feeder Pr oblems The follo wing proc edur e guides you thro ugh multiple a ctions that may solv e this envelope feeder problem. P roceed one step a t a time until the p roblem is solved—you may not n eed to complete the entire proced ure. If one of th[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 8-13 Maintaining the Env elope Feeder Maintain ing the Enve lope Feede r The envelop e feeder requires ver y little mai ntenance; however , with nor mal use you will need to perform some routine maintenance tasks such as cleaning the envelope feeder . Cleaning the Exterior of th[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 8-14 mi cr oLaser 210 Use r Guide[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 9 Using the Of fset Catch T ray In this Chapter . . .  “ About this Chapter ” on page 9-2  “ About the Offset Catc h T ray” on page 9-2  “Installing the Offset Catch T ray” on page 9-3  “T esting the Offset Catch T ray” on page 9-10  “Solv ing Offs et Catch T ray [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-2 micr oLaser 210 User Guide About the Offset Catch T ray About thi s Chapter This chapter provides all of the information necessary to i nstall, use, and maintain the Offset Catc h Tr a y , including procedures for cleaning and removing paper jams. About the Offset Catch T ray The offset catch tray is [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-3 Installing the Offs et Catch T ray Majo r Compo ne nts of th e Of fset C atch T r ay The following illustrati on shows the major comp onents of the offset catch tray:. Figure 9 -2: Offset Catch T ray Major Componen ts. Inst alling t he Of fset Catc h T ray Before i nstalling[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-4 micr oLaser 210 User Guide Installing the Of fset Catch T ray NOTE: Installing the offse t catch t ray while the printer is on may damag e the printer o r the off set catch tray . 3. Squeeze the lat ch on the to p left of the rear cover to release the c over , t hen open the rear cover b yp u l l i n [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-5 Installing the Offs et Catch T ray 4. P ush up on the top cover tabs to release th e top cover , and lif t it off of the printe r . 5. Lower the offset catch tray onto the p rinter while insertin g the stub at the front of the offset catch tray into the hole on the t op of t[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-6 micr oLaser 210 User Guide Installing the Of fset Catch T ray 7. Close t he rear c ov er . 8. Lift up the pap er guide and o pen the offset t ray . 9. P ull the t ray all the w ay out an d lift th e pap er stop.[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-7 Removing the Offset Catch T ray 10. P ush the t ray in un til it mat ches th e size of pa per that w ill be p rinted. 11. Insert the plug of the power cord into the AC outlet and turn the printer on by pressing [I]o nt h ep o w e rs w i t c ho nt h ef r o n tl e f to ft h ep[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-8 micr oLaser 210 User Guide Removing the Offset Catch T r ay 2. P ush the pap er stop in to the ou tput tray . 3. Lift the paper guide and fold up the output tray . 4. T urn the printer off by pre ssing [ O ] on th e pow er switc h on the fr ont left of th e printer , and disco nnect the power cord fro[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-9 Removing the Offset Catch T ray 5. Squeeze the latch on the upper left of the rear c over of the pri nter , and pull the cover towar d you to o pen i t. 6. P ress the tabs on the rear of the offs et catch tray to release it and lift it off o f the printer . 7. Replace the to[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-10 mi cr oLaser 210 Use r Guide T esting the Offset Catch T ray 8. Close t he rear c ov er of the pri nter . T esting the Of fset Catch T ray After installing the o ffset catch tray , use th e following test procedure to verify that it is ope rating correct ly . 1. T u rn the printer on by pressing the [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-11 Solving Of fse t Catch T ray Problems Interpreting Of fset C atch T ray Error Messages The printer control p anel displays error mess ages when there is a problem wit h the printer or any of the optional paper- handling compone nts. The following table lists all o f the err[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-12 mi cr oLaser 210 Use r Guide Solving Of fse t Catch T ray Pr oblems Clearing an Of fset Catch T ray Pap er Jam If an E6 er ror code p r ecedes the er ro r message on the f irst l ine of the cont rol pane l display , paper has ja mmed at th e offset c atch tra y . Use the foll owing pro cedure to clea[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-13 Solving Of fse t Catch T ray Problems NOTE: I ft h em a i np a p e rt r a yi si nt h ee x t e n d e dp o s i t i o n ,r e m o v et h et r a yb e f o r eo p e n i n gt h er e a r cover . 5. Close t he rear c ov er . Corr ecting Miscellaneous Of fset Catch T ray Problems Some[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-14 mi cr oLaser 210 Use r Guide Solving Of fse t Catch T ray Pr oblems The follo wing proc edur e guides you thro ugh multiple a ctions that may solv e this offset catch tray problem. P roceed one step a t a time until the p roblem is solved—you may not n eed to complete the entire proced ure. If one [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-15 Solving Of fse t Catch T ray Problems Offset Catch T ray Makes Unusual Noises The following characteristics define this offset catch t ray problem:  The offset catch tray makes unusual noises or makes mor e noise than usual either while idle or while printing .  The o[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-16 mi cr oLaser 210 Use r Guide Maintaining the Offset Catch T ray Maintain ing the Offset Catch T ray The offs et catch tr ay requires ver y littl e maintenance; h owever , wit h normal u se you wil l need to perform some routine maintenance tasks such as cleaning. Cleaning t he Exteri or of the Offset[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 9-17 Moving the Offs et Catch T ray 4. F o ld the output paper tray into the offset catch tray . 5. Remo v e the offset catch t ray off o f the pr inter . Refer to “R e mo ving th e Off set Catc h T ray” on page 9-7 for co mplete ins tructions. 6. Remove the offset catch tra[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 9-18 mi cr oLaser 210 Use r Guide Moving the Offset Catch T ray[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Chapter 10 Using the Face Up T ray In this Chapter . . .  “ About this Chapter ” on page 10-2  “ A b o u tt h eF a c eU p T r a y ”o np a g e1 0 - 2  “Installi ng the F ace Up T ray” on page 10-3  “ T esting the F ace U p T ray ” on page 10-9  “Solving F ace Up T ray P ro[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 10-2 microLaser 210 User Guide Abou t the Fac e Up T ray About thi s Chapter This chapter provides all of the information necessar y to install and remove the Fac e Up T r a y . About the Face U p T ray The face up tray is an optional output tray that a ttaches to the top rear of the printer and can hold [...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 10-3 Installing the Fac e Up T ray Inst alling t he Face Up T r ay Before inst alling the face up tray , remove it f rom its packaging and verify that yo u have received an face up tra y and that it is i n good conditi on. If any par t of the face up tra y is missing or damaged [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 10-4 microLaser 210 User Guide Installin g the Face Up T ray 4. Remo ve the belt attached to the belt hole on the i nside of the rear cover . 5. Squeeze th e lock cli p on the ins ide rig ht of the rear c over , and slide i t toward you. 6. Slide the r ear cover to the right, and remo ve it from the print[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 10-5 Installing the Fac e Up T ray 7. Place the holes in the lef t and right sides of the f ace up tray over the stubs on the inside o f the printer , and slide the face up tray to the left. 8. Slid e the lock back to its original pos ition. 9. Insert the belt into the belt hole[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 10-6 microLaser 210 User Guide Removin g the Face Up T ra y 10. Close t he rear c ov er . Remo ving th e Face Up T r ay U se the following proc edure to remove the face up tray : 1. T urn the printer off by pre ssing [ O ] on th e pow er switc h on the fr ont left of th e printer , and disco nnect the pow[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 10-7 Removing the Face Up T ray 3. Remo ve the belt attached to the belt hole on the in side of the face up tray . 4. S q u e e z et h el o c kc l i po nt h ei n s i d er i g h to ft h ef a c eu pt r a y ,a n ds l i d e i tt o w a r dy o u . 5. Slide the rear co ver to the right[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 10-8 microLaser 210 User Guide Removin g the Face Up T ra y 6. Place the holes in the left and right sid es of the rear co ver over the stubs on the inside of the printer , and s lide the rear cover to the left. 7. Slid e the lock back to its original pos ition. 8. Insert the belt into the belt hole on th[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide 10-9 T esti ng the Fac e Up T ray 9. Close t he rear c ov er . T esting the Face Up T ray After installing the f ace up tray , use the following test procedure to verify that it is o perating cor- rec tl y . 1. T u rn the printer on by pressing the [ I ] on the p ower swi tch on[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 10-10 mi cr oLaser 210 User Guide Solving Face Up T ray Problems Interpreting Face U p T ra y Err or Mess ages The printer control p anel displays error mess ages when there is a problem with the pri nter or any of the optional paper- handling components. The following table lists all of the error message[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Appendix A GENICOM Customer Suppor t and Par t Numbers In this Chapter . . .  “ About this Appendix” o n page A -2  “Sources of Suppor t” on page A -2  “GENICOM W orldwide O ffic es” on page A-3  “GENICOM P art Numbers” on page A-6[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 A-2 micr oLaser 210 User Guide Sources of Suppor t About th is App endix This appe ndix explai ns the avail able sourc es of GENICOM Cu stomer S upport, and also lists con- tact inf ormatio n and loc ations of GENI COM wo rldwid e offices . This ap pendix a lso lists the par t numbers for GENICOM micr oLa[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide A-3 GENICOM W orldwide Of fices GENICOM Service If y ou hav e a har dw are p rob lem you can not r es olve, contac t GENICO M Service at (888 ) 367-3772. Other important GEN ICOM phone numbers:  GENICOM S ales - (800) 436 -4266  GENICOM P arts - (800) 43 6-4266 x 2 x 3, P [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 A-4 micr oLaser 210 User Guide GENICOM W orldwide Offices GENICOM Belgium GENICOM Belgium c/o Airport B usiness Cente r Vuurbe r g 80 B-1831 Machelen, Be lgium T elephone: 32 2 712 6270 Fax: 32 2 720 5811 GENICOM France GENICOM S.A. ZAC de Gati nes 17, Ave du Garigliano 91601 Savigny-S ur-Or ge, Ced ex, F[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide A-5 GENICOM W orldwide Of fices GENICOM Singapor e GENICOM Singapore 15 Beach Road #04-0 9 Beach C entre Singapore 189677, Singapore T elephone: 65 338 3438 Fax : 65 338 733 6 GENICOM U.K. GENICOM Limited Unit B13 Armstr ong Mall Southwood Farn borough, Ham ps hire GU14 ONR Unit[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 A-6 micr oLaser 210 User Guide G E N I C O MP a r tN u m b e r s G E N I C O MP a r tN u m b e r s The following tables li st GENICOM part numbers for the microLaser 210 printer , options, and cons umab les . Prin ters Pape r Handling O ptio ns Network Inter fa ces G E N I C O MP a r tN u m b e r Desc rip[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide A-7 G E N I C O MP a r tN u m b e r s DRAM , FLAS H SIM M an d Hard Disk Dr ive Op tions User Publications Consumab les    G E N I C O MP a r tN u m b e r Description 6A0621PO1 32MB DRAM Memory SIMM 6A0622PO1 FLASH SIMM Module 6A1253PO1 Hard Disk Drive Option G E N I C [...]

Publicati on No. G EG-99054 Genicom Mar 0 0 A-8 micr oLaser 210 User Guide G E N I C O MP a r tN u m b e r s[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 Appendix B Safety Notes and Regulatory Compliance In this Chapter . . .  “ About this Appendix ” on page B- 2  “ Safety N otes ” on page B -2  “ Regul atory Compliance ” on page B-2[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 B-2 micr oLaser 210 User Guide Safety Notes About th is App endix This appe ndix lists import ant safety pre caution s and identifies t he applicable r egulat ory compli- ances of your printer . Safe ty Notes  Be sure to swi tch off an d unp lug the pri nter be fore acce ssing th e interio r of the pri[...]

Mar 00 Genicom Publ icatio n No. GEG -990 54 microLaser 210 User Guide B-3 Regulatory Compliance EMC Compliance Class B Equipment This equipment has been tested and found to c omply with the l imits for a Class B d igital device, pursua nt to P ar t 15 o f FCC r ules. Th ese limits are designed t o provide reasonable protecti on against harmful int[...]

Publicati on No. G EG-99054 Genicom Mar 0 0 B-4 micr oLaser 210 User Guide Regulatory Compliance   [...]