Nortel VT100 manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97

Aller à la page of

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Nortel VT100. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Nortel VT100 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Nortel VT100 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Nortel VT100 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Nortel VT100
- nom du fabricant et année de fabrication Nortel VT100
- instructions d'utilisation, de réglage et d’entretien de l'équipement Nortel VT100
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Nortel VT100 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Nortel VT100 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Nortel en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Nortel VT100, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Nortel VT100, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Nortel VT100. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Meridian IVR VT100 Gate w a y De v elopment Guide Publication n umber : 555-9001-316 Product release: Meridian IVR 2.0/I Document release: Standard 1.0 Date: F ebruar y 1996 © 1996 Nor ther n T elecom All rights reser ved Printed in the United States of Amer ica Inf or mation is subject to change without notice. Nor ther n T elecom reser v es the [...]

  • Page 2

    iii Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Publication history February 1996 This document is the first standard issue for Meridian IVR release 2.0/I.[...]

  • Page 3

    v Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Contents About this guide ix Who should use this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix How to use this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix Additional Nor tel manuals . . . . . . . . . . . . . . . . .[...]

  • Page 4

    vi Contents 555-9001-316 Standard 1.0 February 1996 Chapter 4: IVR 2.0/I call flow interface 4-1 Using the COMI, COMO , and COMA cells to access the host computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Setting the COMI cell parameters . . . . . . . . . . . . . . . . . . . . . . . 4-2 An application using[...]

  • Page 5

    Contents vii Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 3-10 Logout-action template used by the initial-action tem- plate for accounting application ............................. 3-16 Figure 3-11 Action template for accounting application ............ 3-18 Figure 3-12 Reset-action template for accounting application .[...]

  • Page 6

    ix Meridian IVR VT100 Gateway Development Guide Product release 2.0/I About this guide Who should use this guide The Meridian IVR 2.0/I VT100 Gateway Development Guide is intended for use by Meridian IVR 2.0/I application developers whose voice applications require VT100 based access to computer resources external to the application processor. The [...]

  • Page 7

    x About this guide 555-9001-316 Standard 1.0 February 1996 Chapter 4: IVR 2.0/I call flow interface This chapter explains how to integrate the templates you created in Chapter 3 with your Meridian IVR 2.0/I application call flow. Appendix A: Host error messages This appendix lists error messages and provides information on troubleshooting. Addition[...]

  • Page 8

    1-1 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Chapter 1: About the VT100 Gateway This chapter provides an introduction to the Meridian IVR 2.0/I VT100 Gateway as well as • background on the VT100 terminal • descriptions of the Meridian IVR 2.0/I VT100 Gateway software • a description of the TRS configuration • a bri[...]

  • Page 9

    1-2 About the VT100 Gateway 555-9001-316 Standard 1.0 February 1996 Figure 1-1 Terminals connected to a host computer The VT100 terminal uses an asynchronous communication protocol to transmit characters to and from a host computer. The VT100 Gateway communicates with a host through a serial port and a modem, or through a serial port and a direct c[...]

  • Page 10

    About the VT100 Gateway 1-3 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 1-2 VT100 application screen sample An active host to terminal connection is called a session. The VT100 Gateway can execute a series of transactions during a session. A transaction is the series of steps required to perform a specific function lik[...]

  • Page 11

    1-4 About the VT100 Gateway 555-9001-316 Standard 1.0 February 1996 The VT100 Gateway software You can install the Meridian IVR 2.0/I VT100 Gateway on Intel’s new generation 64-bit Pentium TM microprocessor. To support the VT100 Gateway, the application processor must • have an ACCESS link connected to Meridian Mail • be connected to one or m[...]

  • Page 12

    About the VT100 Gateway 1-5 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I A Meridian IVR 2.0/I process called the Terminal Resource Server (TRS) controls all VT100 sessions, as well as manages all host connections. The TRS runs as a stand-alone process within the Meridian IVR 2.0/I architecture, and starts when Meridian IVR 2.0[...]

  • Page 13

    1-6 About the VT100 Gateway 555-9001-316 Standard 1.0 February 1996 ATTENTION! The TRS process for managing calls is restricted to handling one acti ve line at a time (single threaded mode). Therefore, you should add a loop to applications that interact with the TRS so that customers who call at peak hours are informed on the status of their call. [...]

  • Page 14

    2-1 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Chapter 2: Template files The TRS process uses action and screen templates to maneuver through the screens of a host application. These templates exchange information with the host application screens and transfer information to and from the TRS’s buffers. Coupled with the VT1[...]

  • Page 15

    2-2 Template files 555-9001-316 Standard 1.0 February 1996 To develop a voice application that accesses the same information as a terminal operator, you need to tell Meridian IVR 2.0/I how to execute the same series of actions that the terminal operator executes. You provide this information in ASCII files called template files. Template files prov[...]

  • Page 16

    Template files 2-3 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 2-1 Voice response system vs. terminal operator The TRS requires two types of template files: • Action templates , which describe the sequence of screens traversed in order to perform a specific transaction. • Screen templates , which validate each scre[...]

  • Page 17

    2-4 Template files 555-9001-316 Standard 1.0 February 1996 Figure 2-2 Action and screen templates VT100 based applications often have format inconsistencies that make it difficult for the TRS to efficiently determine when the host application is ready for input and what region of the host screen contains vital information. These inconsistencies are[...]

  • Page 18

    Template files 2-5 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I The action templates, screen templates, and screen.conf file are ASCII text files that use a simple syntax to define the screen flow and input/output fields. The sections that follow provide a detailed explanation of the templates, as well as the information neces[...]

  • Page 19

    2-6 Template files 555-9001-316 Standard 1.0 February 1996 Action template syntax An action template is an ASCII file created with a text editor. The action template files you create must reside in the /u/ivr/3270 directory or in a subdirectory below /u/ivr/3270. They must also have the file name extension .act. For example, if you created an actio[...]

  • Page 20

    Template files 2-7 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 2-4 Action template for accounting application In Figure 2-4, action-name is getbalance , the name of the action template file without the .act extension. The app-name is accounting . The reset-action is reset_cust (file name reset_cust.act ), and the logou[...]

  • Page 21

    2-8 Template files 555-9001-316 Standard 1.0 February 1996 Comments start with the “#” symbol and can be embedded anywhere in the action template. If a comment begins a line, no non-comment fields may follow the comment in that line. However, a comment may appear after a non-comment field, such as after the screen template name as shown in Figu[...]

  • Page 22

    Template files 2-9 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 2-5 Reset-action template sequence sample Entering a hyphen “-” in the reset-action entry indicates that no reset-action template is specified. If no reset-action template is specified and the transaction being executed by the action template fails, the[...]

  • Page 23

    2-10 Template files 555-9001-316 Standard 1.0 February 1996 Figure 2-6 Reset-action template sample The action template using this reset-action template would enter reset_cust as the reset-action entry. logout-action The logout-action specifies a logout-action template to be executed if the reset-action template fails, or if the transaction fails a[...]

  • Page 24

    Template files 2-11 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 2-7 Logout action flow The logout-action template locates the screen where the transaction failed. If for example, the transaction failed at the account number screen, the logout-action template locates the screen template with the appropriate validation t[...]

  • Page 25

    2-12 Template files 555-9001-316 Standard 1.0 February 1996 Figure 2-8 Logout-action template sample screen-template The screen-template (the file name of the template without the .scn extension) identifies the screen template used during the VT100 transaction. Enter the screen templates in the exact order they appear during the transaction. Each s[...]

  • Page 26

    Template files 2-13 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Note: You should not specify a reset-action template in an action template that uses manual mode. Manual mode is designed to stay at a specific screen. The next transaction received by the session will start at the last screen of the action template that used man[...]

  • Page 27

    2-14 Template files 555-9001-316 Standard 1.0 February 1996 Figure 2-9 Screen showing fields and the system prompt In Figure 2-9, vad has been entered into the login field. If the Return key is pressed, the application starts and the screen is replaced by the application screen. A sample application screen showing fields is shown in Figure 2-10. He[...]

  • Page 28

    Template files 2-15 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 2-10 Application screen for accounting application Different transactions may access different fields on a screen. For example, a transaction to locate the payment due would only need to access that field, while a transaction retrieving the customer’s ba[...]

  • Page 29

    2-16 Template files 555-9001-316 Standard 1.0 February 1996 Figure 2-11 Screen template syntax The lines depicted as • represent additional field-descriptor lines. The example in Figure 2-12 illustrates a screen template file that obtains the balance from the screen shown in Figure 2-10. #comment screen-name v alidation tag offset v alidation tag[...]

  • Page 30

    Template files 2-17 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 2-12 Screen template for accounting application In Figure 2-12, the first line is a comment describing the screen template file. The screen-name i s “customer,” the name of the screen template file without the .scn extension. The “1,1” represents t[...]

  • Page 31

    2-18 Template files 555-9001-316 Standard 1.0 February 1996 #comment The first line of the template in Figure 2-12 is a comment. The comment line is not required but is recommended to describe the purpose of the screen template. Comments can be embedded anywhere in the screen template and start with the “#” symbol. If a comment begins a line, n[...]

  • Page 32

    Template files 2-19 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I validation-tag This entry specifies the validation-tag used on the screen. The entry should be text that always appears in the same location every time this screen displays. For the example, “Account” is always displayed starting at location 1,1 whenever a cu[...]

  • Page 33

    2-20 Template files 555-9001-316 Standard 1.0 February 1996 Figure 2-13 The field-descriptor syntax Note: If the application running on the host is stream-based, meaning the screen scrolls as the user enters data and retrieves responses, you should enter the field-descriptor as follows: 0,0- BLANKOUT In this instance, the field-descriptor will clea[...]

  • Page 34

    Template files 2-21 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I If you enter “0,0” and a hyphen for the row,column and field-name entries, the field I/O specified is executed at the current cursor location. To locate field-names on the screen for reading, the offset of the upper left corner of the screen is 1,1 and the lo[...]

  • Page 35

    2-22 Template files 555-9001-316 Standard 1.0 February 1996 T able 2-1 V alid field I/O entries Note: Place the asterisk and dollar sign characters in quotation marks if your field-descriptors require their use without their associated buffer commands. For retrieving data into an output buffer, $ num indicates the number of characters to be retrie[...]

  • Page 36

    Template files 2-23 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I When entering a field-descriptor , the entries on the line should be separated by white space or tab characters. If you are entering text for the field I/O, the TRS ignores any white space you include with the value until it encounters the new line character (e.g[...]

  • Page 37

    2-24 Template files 555-9001-316 Standard 1.0 February 1996 keyname The name of the key for this screen. Table 2-2 lists the valid keys you can enter. T able 2-2 V alid key names This line may appear anywhere after the screen-name line (i.e., the first non-comment line). As with field-descriptor lines, the entries on this line must be separated by [...]

  • Page 38

    Template files 2-25 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I sleep-descriptor (optional) A sleep-descripto r causes the transaction to pause for a specified number of seconds. You can use a sleep-descriptor to pause the transaction for a specified period of time before or after processing a key-descriptor . The waiting per[...]

  • Page 39

    2-26 Template files 555-9001-316 Standard 1.0 February 1996 position-indicator This entry should be set to 0,0. @ Identifies that this line is a sleep-descriptor . num Specifies the number of seconds that the session should sleep. For example, to wait 25 seconds, you would code the sleep-descriptor as 0,0 @25 Initial-action templates Before you can[...]

  • Page 40

    3-1 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Chapter 3: Getting started Before using the VT100 Gateway Before you can use the VT100 Gateway, you must complete these tasks: • If necessary, install a multiport adapter board and expander box. • Create the action and screen templates necessary to navigate through the host [...]

  • Page 41

    3-2 Getting started 555-9001-316 Standard 1.0 February 1996 screen.conf file Since the VT100 protocol is character based, it has no built in mechanism for notifying the TRS that host output has ended and the application is ready for input. Creating the screen.conf file allows the TRS to quickly process host output by eliminating the time it spends [...]

  • Page 42

    Getting started 3-3 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 3-1 screen.conf file syntax The colons (:) are used as field delimiters and must be placed in the specified positions without any additional white space. Keyword: The keyword identifies the screen. If the keyword contains a space or a colon, then enclose t[...]

  • Page 43

    3-4 Getting started 555-9001-316 Standard 1.0 February 1996 Note: The TRS considers the begin string and the end string part of the data. See Figure 3-2 for an example of the screen.conf file. Figure 3-2 screen.conf file In Figure 3-2, PROGRAM MENU is the keyword for the first screen. Since it contains a “s13is” case, it also searches for the b[...]

  • Page 44

    Getting started 3-5 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 3-3 trs.conf file syntax The colons (:) and the greater than (>) symbols are used as field delimiters and must be placed in the specified positions without any additional white space. app-name The app-name entry identifies the application on the mainfra[...]

  • Page 45

    3-6 Getting started 555-9001-316 Standard 1.0 February 1996 initial-template The initial-template entry identifies an initial-action template (without the .act file extension) for setting the startup action for the specified sessions when connecting to the host computer. The start-up action brings the specified sessions to the screen on the host co[...]

  • Page 46

    Getting started 3-7 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I heartbeat You can specify an optional heartbeat action for the application specified by app-nam e. You can use this feature to send an indication to the host that a session is still active. Some hosts log out sessions that remain idle for a period of time. You ca[...]

  • Page 47

    3-8 Getting started 555-9001-316 Standard 1.0 February 1996 You want to set up the VT100 Gateway to initialize the sessions as follows: • initialize sessions 2-3 for accounting with acctinit.act , • initialize sessions 4-8 for market with login.act , • initialize sessions 9-10 for banking with login.act , and • initialize sessions 15-17 for[...]

  • Page 48

    Getting started 3-9 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 3-6 vt100.ctl file syntax Figure 3-7 shows a vt100.ctl file, based on the example trs.conf file in Figure 3-5. Figure 3-7 vt100.ctl file for accounting application session-number de vice-name ter minal-type 2 /de v/ttyi1b vt100 3 /de v/ttyi1c vt100[...]

  • Page 49

    3-10 Getting started 555-9001-316 Standard 1.0 February 1996 The follow sections describe each entry in the vt100.ctl file. session-number The session-number entry specifies the session this line defines. For example, the first line in Figure 3-7 defines the terminal type to be used for session 2. The entry must be a single number, ranging from 2 t[...]

  • Page 50

    Getting started 3-11 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I The com.conf file must be created if the baud rate is anything other than 9600. The com.conf file is located in the vt100 directory and a sample is shown in Figure 3-8. Figure 3-8 com.conf file Creating the com.conf file allows you to adjust the following values[...]

  • Page 51

    3-12 Getting started 555-9001-316 Standard 1.0 February 1996 Baud Rate 300 to 19200. Setting the baud rate tells the TRS the rate at which it is to communicate with the host. Set the baud rate by typing B then the rate. For example B4800 or B19200 . Parity PARENB enables parity generation and detection. PAREVN sets parity to even. PARODD sets parit[...]

  • Page 52

    Getting started 3-13 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I A complete sample transaction This section summarizes how the sample accounting application would start up, retrieve a customer’s balance and reset for the next transaction. The sample transaction uses these templates in the following way: • The initial-acti[...]

  • Page 53

    3-14 Getting started 555-9001-316 Standard 1.0 February 1996 Figure 3-9 Initial-action template for accounting application The initial-action template starts the accounting session with the host computer by accessing accounting from the trs.conf file. It then executes the screen templates acctlog1 , acctlog2 , then atacctmenu . Templates Correspond[...]

  • Page 54

    Getting started 3-15 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I The screen template acctlog1.scn does the following: • enters the login name • enters the password • waits three seconds for the host to process the login action The screen template acctlog2.scn does the following: • at the system prompt, enters the comm[...]

  • Page 55

    3-16 Getting started 555-9001-316 Standard 1.0 February 1996 Figure 3-10 Logout-action template used by the initial-action template for accounting application The final screen template listed, logout , brings the host application back to the initial screen, leaving the connection open and waiting for the TRS process to login. TRS always executes th[...]

  • Page 56

    Getting started 3-17 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Action template performing a transaction As shown in Figure 3-10, the initial-action template brings the session to the application’s menu screen. The action template created to get a customer’s balance starts at that screen. Figure 3-11 shows the action tem[...]

  • Page 57

    3-18 Getting started 555-9001-316 Standard 1.0 February 1996 Figure 3-11 Action template for accounting application The number 1 and the account number are entered at the current cursor location. Therefore, you do not need to specify a location or a field-tag . The last line in the “customer” screen template places the contents of the field sta[...]

  • Page 58

    Getting started 3-19 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I The reset-action template is designed to return the session to the “acct” application’s menu screen where it awaits the next transaction. Figure 3-12 shows the reset-action template, and its accompanying screen templates. Figure 3-12 Reset-action template [...]

  • Page 59

    3-20 Getting started 555-9001-316 Standard 1.0 February 1996 Figure 3-13 Logout-action template for accounting application The logout-action template brings the host computer back to the login screen. The TRS then executes the initial-action template, as it does whenever any logout-action template is successful. If the transaction fails before the [...]

  • Page 60

    4-1 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Chapter 4: IVR 2.0/I call flow interface Now that you understand how to script VT100 transactions as action and screen templates, you can begin integrating these templates into your IVR 2.0/I Applications (Figure 4-1). Figure 4-1 Accessing the mainframe This chapter explains •[...]

  • Page 61

    4-2 IVR 2.0/I call flow interface 555-9001-316 Standard 1.0 February 1996 Figure 4-2 Activating the gateway from a COMI cell To develop an application that processes one or more terminal sessions, start as if you were developing any other voice application: • Determine the telephone interaction with the caller and create the corresponding IVR 2.0[...]

  • Page 62

    IVR 2.0/I call flow interface 4-3 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 4-3 COMI cell parameter window start getbalance transaction[...]

  • Page 63

    4-4 IVR 2.0/I call flow interface 555-9001-316 Standard 1.0 February 1996 The following sections describe what you should enter in each area of the parameter window. COMI cell name In order to make the cell easy to identify, includes the name of the action template the cell calls out. The cell name shown in Figure 4-3 is “start getbalance transac[...]

  • Page 64

    IVR 2.0/I call flow interface 4-5 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I COMI cell timeout Select the number of seconds you want the TRS process to wait for the transaction to complete by moving the slider under “Timeout”. There is an available range from 1 to 75 seconds. This indicates the maximum time for the COMI [...]

  • Page 65

    4-6 IVR 2.0/I call flow interface 555-9001-316 Standard 1.0 February 1996 Setting the COMO cell parameters Once you have set the COMI cell to send information, code the COMO cell to receive information. You must place a COMO cell directly after the COMI cell to complete the transaction, even if the host computer is not sending any data to any outpu[...]

  • Page 66

    IVR 2.0/I call flow interface 4-7 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 4-4 COMO cell parameter window The following sections describe what you should enter in each area of the parameter window. COMO cell name The cell name shown in Figure 4-4 is “Receive Balance.” The name helps identify the function of the [...]

  • Page 67

    4-8 IVR 2.0/I call flow interface 555-9001-316 Standard 1.0 February 1996 Call Audit Enabled Determines if this cell logs the following information to the call audit statistics file (audit_stat.d): • Application Name • Cell Name • Cell Number • Date and Time of Cell Execution • Contents of the Cell Comment field • Contents of the Call A[...]

  • Page 68

    IVR 2.0/I call flow interface 4-9 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Note: You must enter the output buffers in the same order they will be used by the TRS process. If your application uses more than 10 output buffers, string COMO cells together until you have enough buffers. Connect the input branch of each subseque[...]

  • Page 69

    4-10 IVR 2.0/I call flow interface 555-9001-316 Standard 1.0 February 1996 For each COMO cell, use either the “END OF DATA” branch, or the “MORE DATA” branch, but not both. If you use the “MORE DATA” branch, the next cell must be another COMO cell. The last COMO cell should use the “END OF DATA” branch. Setting the COMA cell paramet[...]

  • Page 70

    IVR 2.0/I call flow interface 4-11 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I An application using the COMI, COMO, and COMA cells Figure 4-7 shows a sample IVR 2.0/I application that uses the COMI, COMO, and COMA cells to retrieve a customer’s account balance stored on a host computer. This example application uses the act[...]

  • Page 71

    4-12 IVR 2.0/I call flow interface 555-9001-316 Standard 1.0 February 1996 Figure 4-7 IVR 2.0/I application accessing the TRS process from the COMI, COMO cells Prior to the execution of this application, the initial-action template is executed (when IVR 2.0/I is started on the application processor). Once a call from a customer is received, the IVR[...]

  • Page 72

    IVR 2.0/I call flow interface 4-13 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I T able 4-2 Application cell functions If the caller hangs up before the transaction is completed, the COMA cell in the clean-up branch of the START cell clears the memory and buffers associated with the application. Step Description Cell 1 The ANSW[...]

  • Page 73

    4-14 IVR 2.0/I call flow interface 555-9001-316 Standard 1.0 February 1996 Figure 4-8 on page 4-15 shows how the COMI and COMO cell parameters relate to the screens defined on the host computer. This transaction uses an action template, getbalance , to call three screen templates - one to choose the Accounts Receivable menu, one to enter the accoun[...]

  • Page 74

    IVR 2.0/I call flow interface 4-15 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Figure 4-8 COMI/COMO cell parameters, TRS templates, and VT100 screens ACME Accounting 1 Accounts Receivable 2 Accounts Payable 3 Reports 4 Inventory 5 Exit Enter menu selection: Templates Corresponding Screens ACME Accounting 1 Accounts Receivable[...]

  • Page 75

    A-1 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Appendix A: Host error messages Terminal Resource Server (TRS) Messages ERR: Unable to reset application environment Meaning: TRS was unable to reset the 3270 system. Action to take: Stop IVR 2.0/I. Make sure the 3270 board has been downloaded correctly. The download command sho[...]

  • Page 76

    A-2 Host error messages 555-9001-316 Standard 1.0 February 1996 Action to take: Contact your Nortel service representative. ERR: Create_screen_templates Meaning: TRS was unable to open a screen template file or found a syntax error in the screen template files. Action to take: Check the screen template files. Make sure they are syntax error free, r[...]

  • Page 77

    Host error messages A-3 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I ERR: All available sessions are non-operational Meaning: None of the sessions is operational. Action to take: Make sure the communication board has been downloaded correctly. The download command should be included in .profile file. ERR: xx Sessions are Opera[...]

  • Page 78

    A-4 Host error messages 555-9001-316 Standard 1.0 February 1996 Action to take: Contact your Nortel service representative. ERR: xx is not a keyword Meaning: The screen template contains an invalid keyword. Action to take: Revise the screen template. Make sure the KEYWORD (&LOGIN_ID, &PASSWORD, &LU_BUF1 and &LU_BUF2) are spelled cor[...]

  • Page 79

    Host error messages A-5 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I ERR: CH=xx BD xxx SS xxxx: Session not working-manual mode Meaning: This particular session is not working. TRS was unable to attach this session. Action to take: Contact your Nortel service representative. ERR: CH=xx ERR::Parse: Incorrect Action [xxx] Meanin[...]

  • Page 80

    A-6 Host error messages 555-9001-316 Standard 1.0 February 1996 ERR: Send Aid key failed Meaning: TRS did not succeed in sending the aid key to the host. Action to take: Make sure that the host connection exists. ERR: CH=xx Process:ERR: Syntax error for variable operation Meaning: Syntax error in internal variable operation. Action to take: Check t[...]

  • Page 81

    Host error messages A-7 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Action to take: None. Notification only. ERR: 3270 Envoy Process Startup Meaning: 3270 envoy has been started up. Action to take: None. Notification only. ERR: Process Startup Meaning: The TRS process with no 3270 communication capability has been started up.[...]

  • Page 82

    A-8 Host error messages 555-9001-316 Standard 1.0 February 1996 ERR: CH=xx illegal Command xxx Meaning: TRS received an illegal command from another process. Action to take: Contact your Nortel service representative. ERR: Server Node file trs.node does not exist Meaning: trs.node file was missing from the envoy process node. Action to take: This e[...]

  • Page 83

    Host error messages A-9 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I ERR: Send_with_aid: Connect to session xx failed Meaning: TRS failed to connect to session xx before sending the aid key. Action to take: Check the communication system to make sure it works properly. ERR: Send_with_aid: failed with return code of xx Meaning:[...]

  • Page 84

    A-10 Host error messages 555-9001-316 Standard 1.0 February 1996 Action to take: Contact your Nortel service representative. ERR: Create_queue_object: Attempt to create Queue class instance failed Meaning: TRS was unable to allocate memory for the QUEUE_CLASS structure. Action to take: Contact your Nortel service representative. ERR: A request for [...]

  • Page 85

    Host error messages A-11 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Action to take: Contact your Nortel service representative. ERR: Create_idle_timer: Idle timer memory allocation failed Meaning: TRS was unable to allocate memory for the idle timer structure. Action to take: Contact your Nortel service representative. ERR: [...]

  • Page 86

    A-12 Host error messages 555-9001-316 Standard 1.0 February 1996 ERR: Protocol missing, specify 3270 or VT100 Meaning: The protocol type was missing from the trs.conf protocol field. Action to take: Make sure that ‘3270’ or ‘vt100’ is specified in the protocol field. ERR: Incorrect syntax for ping action Meaning: The heartbeat action templa[...]

  • Page 87

    Host error messages A-13 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I ERR: First LU cannot be less than xx. Meaning: The first session defined in the trs.conf file was less than allowed as specified by xx. Action to take: Revise the session field of the trs.conf file. ERR: Last LU cannot be greater than xx Meaning: The last se[...]

  • Page 88

    A-14 Host error messages 555-9001-316 Standard 1.0 February 1996 ERR: in map.dat:Session xx not defined in trs.conf Meaning: The session number xx defined in the map.dat file was not defined in the trs.conf file. Action to take: Revise the map.dat file or the trs.conf file and make sure that the session number matches. ERR: read data from file ../3[...]

  • Page 89

    Host error messages A-15 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Action to take: Revise the password in lubuf.dat file so that the length of the password does not exceed xxx. ERR: In ../3270/lubuf.dat:lu_buf1 exceeds xx characters Meaning: There are too many characters in the lu_buf1 field defined in the lubuf.dat file. A[...]

  • Page 90

    A-16 Host error messages 555-9001-316 Standard 1.0 February 1996 ERR: Screen name xx must match the file name without .scn Meaning: Invalid screen name defined in the screen template file. Action to take: Revise the screen template file and make sure the screen name is the screen template file name without .scn. ERR: Validate tag xx of screen xxx e[...]

  • Page 91

    Host error messages A-17 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Action to take: Revise the application to keep the screen templates within the limit specified by xx. ERR: Open action file xx failed Meaning: TRS failed to open the action file xx. Action to take: Create or change permissions of the action template file to [...]

  • Page 92

    A-18 Host error messages 555-9001-316 Standard 1.0 February 1996 ERR: reset action xx of the action xxx not found Meaning: The reset action template xx defined in the action template xxx was not found under the 3270 directory. Action to take: Create the appropriate reset template file. ERR: logout action xx of the action xxx not found Meaning: Logo[...]

  • Page 93

    Glossary-1 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Glossary VT100 Gateway terms This section lists brief definitions of the terms appearing in this guide. Application With respect to IVR, an application is a program that controls the activity on one or more telephone trunks connected to an AP. With respect to a host compu[...]

  • Page 94

    Glossary-2 555-9001-316 Standard 1.0 February 1996 Channel A telephone trunk within a cluster of APs. COMA Cell IVR cell that cancels a transaction in a VT100 terminal session. It does not terminate the session itself. COMI Cell IVR cell that sends input to a VT100 terminal session via the TRS process. COMO Cell IVR cell that receives output from a[...]

  • Page 95

    Glossary-3 Meridian IVR VT100 Gateway Development Guide Product release 2.0/I Transaction The function performed by a set of action and screen template files when executed by the TRS. TRS Terminal Resource Server. IVR process that manages the assignment of available VT100 terminal resources on the application processor. Moves data between IVR and a[...]

  • Page 96

    [...]

  • Page 97

    Meridian IVR VT100 Gate w a y De v elopment Guide Nor tel Customer Documentation 522 Univ ersity A ven ue, 14th Floor T oronto , Ontario, Canada M5G 1W7 © 1996 Nor ther n T elecom All rights reser ved Publication n umber : 555-9001-316 Product release: 2.0/I Document release: Standard 1.0 Date: F ebruar y 1996 Printed in the United States of Amer [...]