Onkyo TX-NR5007 manuel d'utilisation

E n A V Receiv er TX-NR3007 TX-NR5007 Instruction Manual Thank you for purchasing an Onkyo A V Receiv er. Please read this manual thoroughl y before making connections and plugg ing in the unit. Follo wing the inst ructions in this manual will enable you to obtain opti mum performance and listening enjoyment from your new A V Receiv er. Please reta[...]

2 Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructi ons. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventil ation openings. Install in accordance with the manuf acturer’ s instructions. 8. Do not install near an [...]

3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyright ed material is il legal wit h- out the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer . 3. Care —Occasionally you should dust the u[...]

4 Precautions —Continued F or British models Replacement and mounting of an A C plug on the po wer supply cord of this unit should be performed only by qualified service personnel. IMPOR T ANT The wires in the mains lead ar e coloured in accordance with the following code: Blue: Neutral Brow n: Liv e As the colours of the wires in the mains le ad[...]

5 Contents Important Safety Instructions .......................... .................. 2 Precautions ..................................................... .................. 3 Supplied Accessories ............................. .......................... 4 Features ........... ....................................... .......................... 6 Fron[...]

6 Features Amplifier (TX-NR3007) • 140 W atts/Channel @ 8 ohms (FTC) • 200 W atts/Channel @ 6 ohms (IEC) • 250 W atts/Channel @ 6 ohms (JEIT A) (TX-NR5007) • 145 W atts/Channel @ 8 ohms (FTC) • 220 W atts/Channel @ 6 ohms (IEC) • 280 W atts/Channel @ 6 ohms (JEIT A) • WRA T–Wide Range Amplif ier T echnology (5 Hz-100 kHz bandwidth) [...]

7 Features —Continued *6. HD Radio™ an d the HD Radi o Ready logo are propriet ary trademarks of iBiquity Di gital Corpor ation. T o recei ve HD Radio bro adcasts, you mu st install an Onkyo UP-HT1 HD Radio tun er module (sold separa tely). *7. In Europe, us ing banana p lugs to con nect speakers t o an audio amplifie r is prohibited. *8. SIRIU[...]

8 Fr ont & Rear P anels The actual front panel has v arious logos printe d on it. They are not sho wn here for clarity . The page numbers in parentheses show where you can f ind the main explanation for each item. a ON/ST ANDBY button (48) This button is used to set the A V receiver to On or Standby . b ST ANDBY indicator (48) Lights when the A[...]

9 Fr ont & Rear P anels —Continued (Nor th American models) (Eur opean and Asi an models) The page numbers in parentheses show where you can find the main explanation for each item. j PHONES jack (70) This 1/4-inch phone jack is for connecting a stan- dard pair of stereo hea dphones for priv ate listening. k ZONE 2, ZONE 3, and OFF b uttons ([...]

10 Front & Rear P a nels —Continued v SETUP MIC jack (62) Audyssey MultEQ ® XT Room C orrection and Speaker Setup micropho ne connects here. w USB port (127) A USB mass storage device, such as a USB flash driv e or MP3 player , containing music files can be plugged in here and the music selected can be played through the A V receiv er. x AU [...]

11 Fr ont & Rear P anels —Continued g T uning indi cators RDS (European models) (75): Lights when tuned to a radio station that supports RDS (Radio Data System). AU T O ( 7 3 ) : Lights when Auto T uning m ode is selected for AM or FM radio. Goes off when Manual T uning mode is selected. TUNED (7 3): Lights when tuned to a radio station. FM S[...]

12 Front & Rear P a nels —Continued d DIGIT AL CO AXIAL IN 1, 2, and 3 These coaxial digital audio inputs are for connect- ing components with coaxia l digital audio outputs, such as CD and D VD/BD players. The y’ re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Aud io Input Setup?[...]

13 Fr ont & Rear P anels —Continued y D VD/BD IN Here you can connect a D VD/BD player . Input jacks include S-V ideo, co mposite video, and analog audio. Y ou can connect a D VD/BD player’ s 2-chan- nel analog audio output. z MUL TI CH input: FR ONT L/R, CENTER, SUBWOOFER, SURR L/R, and SURR BA CK L/R This analog multichannel input is for [...]

14 Remote Contr oller Notes: • If the remote controller doesn’t w ork reliably , try replacing the batteries. • Don’ t mix new and old batteries or dif ferent types of batteries. • If you intend not to use th e remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion. • Expired batteries should[...]

15 Remote Controller —Contin ued For detailed information, se e the pages in parentheses. a ST ANDBY button (48) Sets the A V receiv er to Standb y . b ON button (48) T urns on the A V rece iv er. c A CTIVITIES b uttons (71, 153) Used with the MA CR O function. d REMO TE MODE/INPUT SELECT OR buttons (67, 143 to 149) Selects the remote contro ller[...]

16 Remote Contr oller —Continued ■ Controlling the tuner T o control the A V receiver’ s tuner, press the [TUNER] (or [RECEIVER]) button. Y ou can select AM or FM by pressing the [TUNER] b ut- ton repeatedly . 1 Arro w [ q ]/[ w ] b uttons Used to tune into radio stations. 2 D .TUN button (73) (TUNER remote mo de only) Selects the Dire ct tun[...]

17 About Home Theater Thanks to the A V receiver’ s superb capabilit ies, you can enjoy surround sound with a real sense of mov ement in your own home—just lik e being in a movie th eater or concert hall. W ith DVDs you can enjo y DTS and Dolby Digital. W i th analog or digital TV , you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’ s or[...]

18 Connecting the A V receiver About Speaker s A and Speakers B Speakers A and Speakers B allo ws you to hav e two speaker c onf igurations of up to 7.2 spea k ers. Each configuration has its own pair of stereo front speakers and can use the same subwoofer , center, sur round, and surround back speakers, as required. Y ou could, for ex ample, use S[...]

19 Connecting the A V receiver —Continued Speaker Config uration For 9.2-channel surround-sound playback, you need nine speak ers and two powered subwoo fers. The following table indicates the ch annels you should use de pending on the number of speakers that you have . * If you’re using only one s urround bac k speaker, connect it to th e SURR[...]

20 Connecting the A V receiver —Contin ued Using Dipole Speak ers Y ou can use dipole speak ers for the surround left and right, surround back left and right speake rs. Dipole speakers output the same sound in two directions. Dipole speakers typically ha ve an arro w printed on them to indicate ho w they shoul d be positioned. The surround left a[...]

21 Connecting the A V receiver —Continued Connecting the Spea ker Cables ■ 9.2-channel Playbac k with Speakers A The following illustration shows which speaker should be connec ted to each pair of terminal s. If you’ re using only one surround back speaker , connect it to the SURR B A CK/ZONE 3 L terminal. 1 Strip 1/2" to 5/8" (12 t[...]

22 Connecting the A V receiver —Contin ued ■ 7.2-channel Pla yback with Speakers A or Speakers B The following illustration sh ows which speak er should be connected to each pair of terminals for up to 7.2-channel playback with Speakers A or Speakers B. If you’ re usi ng only one surround back speake r , connect it to the SURR B A CK/ZONE 3 L[...]

23 Connecting the A V receiver —Continued The FR ONT L/R and SURR B A CK/ZONE 3 L/R termi- nal posts can be used with front speakers and surround back speakers respecti vely , or bi-amped to provide sepa- rate tweeter and woofer feeds for a pair of front speak ers A that support bi-amping, pr oviding impro ved bass and treble performance. • Whe[...]

24 Connecting the A V receiver —Contin ued The FR ONT L/R and SURR BA CK/ZONE 3 L/R ter- minal posts can be used with front speakers and surround back speakers resp ectiv ely , or bridged together to pro- vide almost double the out put power for the front speakers A. • When bridging is used, surround back speak ers cannot be used. • For bridg[...]

25 Connecting the A V receiver —Continued The FR ONT WIDE/ZONE 2 L/R and SURR B A CK/ZONE 3 L/R terminal posts can be used with front wide speakers and su rround back speakers respec- tiv ely , or bi-amped to provide separat e tweeter and woofer feeds for a pair of front speak ers B that support bi-amping, providing impro v ed bass and treble per[...]

26 Connecting the A V receiver —Contin ued The FR ONT WIDE/ZONE 2 L/R and SURR B A CK/ZONE 3 L/R terminal pos ts can be used with front wide speake rs and surro und back speak ers respec- ti vely , or bridged together to provide almost dou ble the output power for the front speak ers B. • When bridging is used, surround back speak ers cannot be[...]

27 Connecting the A V receiver —Continued This section explains ho w to connect the supplied indoor FM antenna and AM loop ante nna, and how to connect commercially a v ailable outdoor FM and AM an tennas. The A V receiv er won’ t pick up any radio signals without any an tenna connected, so you must connect the antenna to use the tuner . Connec[...]

28 Connecting the A V receiver —Contin ued Connecting an Outdoo r FM Antenna If you cannot achie ve good reception with the supplied indoor FM antenna, try a co mmercially a vailable out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obta i ned when installed in an attic or loft. ?[...]

29 Connecting the A V receiver —Continued • Before making an y A V conne ctions, read the manuals supplied with your other A V components. • Don’ t connect the power cord until you’ ve completed and double-checked all A V connections. Optical Digi tal Jac ks The A V receiv er’ s optical digi tal jacks ha ve shutter-type cov ers that ope[...]

30 Connecting the A V receiver —Contin ued About HDMI Designed to meet the increased demands of digital TV , HDMI (High Definition Mu ltimedia Interface) is a new digital interface standard for connect ing TVs, projectors, D VD/BD players, set-top boxes, and other video components. Until now , sev eral separate video and audio ca bles hav e been [...]

31 Connecting the A V receiver —Continued Making HDMI Connections ■ Video Signals Digital video signals recei ved b y th e HDMI IN jacks are norma lly output by the HDMI MAIN OUT and SUB OUT for display on your TV . Composite vi deo, S-V ideo, and component video sou rces can be upcon verted for the HDMI output. See “V id eo Connection Format[...]

32 Connecting the A V receiver —Contin ued By connecting both the audio and video out puts of your D VD/BD player and other A V components to the A V receiv er, you can select both the audio a nd video simultaneously simply by selecting the appropriate input source on the A V receiv er. The A V receiv er supports se veral connecti on formats for [...]

33 Connecting the A V receiver —Continued ■ “Monitor Out” Setting Set to “Both”, “Both(Main)” or “Both(Sub)” W ith the “Monitor Out” setting set to “Both”, “Both(Main)” or “Bot h(Sub)” (see page 52), video input signals flo w through the A V receiver as show n, with composite video, S-V i deo, and component video[...]

34 Connecting the A V receiver —Contin ued A udio Connection Formats Audio equipment can be connected to the A V receiv er by using an y of the follo wing audio con- nection formats: analog, optical, coaxial, analog multichannel, or HDMI. When choosing a connection format, bear in mind that the A V receiver does not con v ert digital input signal[...]

35 Connecting the A V receiver —Continued See “Connecti ng Components with HDMI” on page 30 f or HD MI connection information. • W ith connection , you can listen to and record audio from your TV or listen in Zone 2 or Zone 3. • T o enjoy Dolby Digital and DTS, use connection or . (T o record or list en in Zone 2 or Zone 3 as well, use an[...]

36 Connecting the A V receiver —Contin ued See “Connecting Components with HDMI” on page 30 for HDMI connection inf ormation. • W ith connection , you can listen to and record audio from your D VD player or listen in Zone 2 or Zone 3. • T o enjoy Dolby Digital and DTS, use connection or . (T o record or listen in Z one 2 or Zone 3 as well[...]

37 Connecting the A V receiver —Continued Hooking Up the Multichannel Inp ut If your D VD player supports multichannel audio formats such as D VD- Audio a nd Sup er Audio CD, and it has a multi- channel analog audio output, you can connect it to the A V recei ver’ s multichannel input. Use a multichannel analog audio cable, or se v eral normal [...]

38 Connecting the A V receiver —Contin ued W ith this hookup, you can use your VCR’ s tuner to li sten to your f av orite TV programs via the A V receiv er, useful if your TV has no audio outputs. • W ith connection , you can listen to the V CR or D VD recorder in Zone 2 or Zone 3. • T o enjoy Dolby Digital and DTS, us e connection or . (T [...]

39 Connecting the A V receiver —Continued Notes: • The A V recei ver must be turned on for recording. Recordi ng is not possible while it’ s in Standb y mode. • If you w ant to record directly from your TV or playback VCR to the reco rding VCR without going through the A V recei ver, connect the TV/VCR’ s audio an d video outputs directly[...]

40 Connecting the A V receiver —Contin ued W ith this hookup, you can use your sa tellite or cable recei v er to listen to your fa vorite TV programs via the A V receiv er, useful if your TV has no audio outputs. • W ith connection , you can listen to and record audio from the video sour ce or listen in Zone 2 or Zone 3. • T o enjoy Dolby Dig[...]

41 Connecting the A V receiver —Continued • W ith connection , you can listen to and record audi o from your game console or listen in Zone 2 or Zone 3. • T o enjoy Dolb y Digital and DTS, us e connection . (T o record or listen in Zone 2 or Zone 3 as well, use and .) Connecting a Game Console Connection A V receiver Signal flow Game console [...]

42 Connecting the A V receiver —Contin ued Connecting a Camcor der or Other De vice Connection A V receiver Signal flow Camcorder etc. A UX1 INPUT VIDEO ⇐ Composite video output A UX1 INPUT L-A UDIO-R ⇐ Analog audio L/R output A UX1 INPUT DIGIT AL ⇐ Digital optical output Step 1: Video Connection Make the connection . A Step 2: A udio Conne[...]

43 Connecting the A V receiver —Continued ■ CD Player or T urntable (M M) with Built-in Phono Preamp • W ith connection , you can listen to and record audi o from your CD player or listen in Zone 2 or Zone 3. • T o connect the CD player digitally , use connection or . (T o record or listen in Zone 2 or Zone 3 as well, use and , or and .) ?[...]

44 Connecting the A V receiver —Contin ued • W ith connection , you can play and record or li sten in Zone 2 or Zone 3. • T o connect the recorder dig itally fo r playback, use conne ctions and , or and . Connecting a Cassette, CDR, MiniDisc, or D A T Recor der Step 1: Choose a connection that matche s the recorder ( , or ), and then make the[...]

45 Connecting the A V receiver —Continued If you want to use a more po werful powe r amplif ier and use the A V receiv er as a preamp, connect it to the PRE OUT jacks, and connect all speakers and the subwoofer to the po wer amplifier . Y ou can connec t the po wered subwoofer with each jacks respecti vely . If you use one subwo ofer , connect it[...]

46 Connecting the A V receiver —Contin ued ■ If Y our iP od Suppor ts Vide o: Connect your RI Dock’ s audio output jacks to the A V receiv er’ s GAME IN or VCR/D VR IN L/R jacks, and connect its video output ja ck to the A V receiv er’ s GAME IN V or VCR/DVR IN V jack. (Onkyo DS- A2 hookup show n below .) ■ If y ou have an Onky o DS-A1 [...]

47 Connecting the A V receiver —Continued Wi t h u (Remote Interactiv e), you can use the follow- ing special functions: ■ Auto P ower On/Standby When you start playback on a component connected via u , if the A V receiver is on Standb y , it will auto- matically turn on and select that component as the input source. Similarly , when the A V re[...]

48 T urning On the A V receiver Eur opean and Asia n models : T o completely shut do wn the A V recei ver, set the [PO WER] switc h to the OFF position () . ON/ST ANDBY ON/ST ANDBY PO WER ST ANDBY ON RECEIVER ST ANDBY indicator (North American models) (European and Asian models) ST ANDBY indicator T urning On and Standby 1 (European and Asian model[...]

49 Fir st Time Setup This section explains the settings that you need to make before using the A V recei v er for the very f irst time. If you connect your TV to HDMI OUT MAIN, “Monitor Out” setting is automa tically set so that the onscreen setup menus are displayed and composite video, S- V ideo, and component vide o sources are up con verted[...]

50 First Time Setup —Contin ued In this Instruction Manual, illustratio ns from the onscreen menu or e xplanations referring to the menu will be in the same language as the Instruction Manua l. The default Language setting for th e onscreen menu is English. If your Instruction Manual is in a language oth e r than English, first follo w the inst r[...]

51 First Time Setup —Continued Carry out the settings for th e A V recei ver b y using t he Onscreen Setup Menu. The settings of the A V recei v er can be changed using the Display . Onscreen Setup Menus an d Displa y As each item in the Onscreen Setup Menus is selected, the select ed items will be displayed one by one. Note: During Audyssey Mult[...]

52 First Time Setup —Contin ued If you connect your TV to the HDMI output, set the “Monitor Out” setting so that the onscreen setup menus are displayed and composit e video, S-V ideo, and component video sources are upcon v erted and output. If you connect your TV to the COMPONENT VIDEO MONITOR OUT, set the “Monitor Out” setting so that t[...]

53 First Time Setup —Continued Notes: • See page 32 for charts sho wing how the “Monitor Out” and “Resolution” settings af fect the video signal flo w through the A V recei ver. • This procedure can also be performed on the A V recei ver by using its [SET UP] butto n, arrow b uttons, and [ENTER] button. 5 Use the Up and Down [ q ]/[ w[...]

54 First Time Setup —Contin ued HDMI Input Setup If you connect a video component to HDMI IN, you must assign that input to an input selector . F or example, if you connect your D VD/BD player to HDMI IN 1, you must assign HDMI IN 1 to th e D VD/BD input selector . If you’ ve connected your TV to the A V receiver with an HDMI cable, you can set[...]

55 First Time Setup —Continued Component Video Input Se tup If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector . For example, if you connect your D VD/BD player to COMPONENT VIDEO IN 2, you should assign it to the DVD/BD input selector . If you’ ve connected your TV to the A V receiver with a component video cable, [...]

56 First Time Setup —Contin ued If you connect a component to a digital input jack, you must assign t hat jack to an in put selector . For e xample, if you connect your CD player to the OPTICAL IN1 jack, you should assign that jack to the CD input selector . By default, the CO AXIAL IN1 ja ck is assigned to the D VD/ BD input selector , alt hough[...]

57 First Time Setup —Continued If you connect a component to the A V recei ver’ s analog multichannel input, you must assign that input to an input selector . For example, if you connect your D VD/ BD player to the MUL T I CH input, you must assign it to the D VD/BD input selector . Notes: • T o listen to the component conn ected to the multi[...]

58 First Time Setup —Contin ued P owe red Zone 2/3 See “Setting the Powere d Zone 2/3” on page 134. Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. 2 Use the Up and Down [ q ]/[ w ] but- tons to select “2. Speaker Setup”, and then press [ENTER]. The “Spea[...]

59 First Time Setup —Continued For the onscreen setup menus to display properly , you must specify the TV syste m used in your area. Note: This procedure can also be performed on the A V recei ver by using its [SETUP] bu tton, arrow b uttons, and [ENTER] button. For FM/AM tuning to w ork properly , you must specify the FM/AM frequenc y step used [...]

60 First Time Setup —Contin ued Note: This procedure can also be performed on the A V receiver by using its [SETUP] b u tton, arro w buttons, and [ENTER] button. If you connect an u -capable Onkyo MiniDisc recorder , CD recorder , or RI Dock to the TV/T APE IN/ OUT jacks, or connect an RI Dock to the GAME IN or VCR/D VR IN jacks, for u to work pr[...]

61 First Time Setup —Continued W ith the supplied calibrated microphone, Audyssey MultEQ XT automatically deter mines the number of speakers connected, their size for purposes of bass management, optimum cr ossov er frequencies to the subwoofer (if present), and di stances from the primary listening position. Audyssey MultEQ XT then remo ves the [...]

62 First Time Setup —Contin ued Using A udysse y MultEQ ® XT ENTER ON/ST ANDBY qwer Speaker setup microphone Notes: • If any of your sp eakers is 4 ohms, change “Speaker Impedance” se tting before runnin g Audyssey MultEQ X T Room Correction and Speaker Setup (see page 57). • If the A V recei ver is mute d, it will be unmuted automatical[...]

63 First Time Setup —Continued • Mak e the room as q uiet as possible. Background noise can disrupt the room measurement s. Close windows, silence cell phones, televisions, radios , air conditioners, fluorescent lights, home appliances, light dimmers, or other devices. • Cell phones should be turned of f or placed away from all audio electron[...]

64 First Time Setup —Contin ued Notes: • When the room correction and speaker setup is complete, the “Equalizer Settings” (page 98) will be set to “Audyssey” and “Dyna mic EQ” (page 102) will be set to “On”. • Y ou can cancel the Room Correction and Speak er Setup at any point in this procedure simply by disconnecting the setu[...]

65 First Time Setup —Continued One of the front speak ers has not been detected. One of the front wide speakers has not been detected. One of the front high speakers has not been detected . One of the surround speakers has not been detected. The surround back speakers ha ve been detected but the surround speakers ha ven’ t. The front high speak[...]

66 First Time Setup —Contin ued The speaker type detected does not match what was expected. The speak er may be incorrect type or bro- ken. Please check that it is t he correct speak er type. ❏ Speaker Matching Error! The number of speakers de tected on the second mea- surement and later was dif ferent to the num ber detected on the f irst meas[...]

67 Basic Operations This section explains ho w to select th e input source (i.e., the A V component that you want to listen to or w atch). Selecting the Input Sour ce 1 Use the A V re ceiver’ s input select or buttons to se lect the input source. T o select the input source with the remote controller , press the [RECEIVER] button, and then press [...]

68 Basic Oper ations —Continued Y ou can adjust the bass and treble for the front speakers, except when the Direct, Pu re Audio or THX listening mode is selected. ■ Bass Y ou can boost or cut lo w-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps. ■ Tr e b l e Y ou can boost or cut high-frequenc y sounds outp[...]

69 Basic Operations —Continued Y ou can adjust the brightness of the A V recei ver’ s dis- play . Y ou can temporarily mute th e output of the A V recei ver. Tip: Y ou can specify ho w much the output is muted with the “Muting Lev el” setting (page 110). W ith the sleep time r , you can set the A V recei ver to turn off aut omatically after[...]

70 Basic Oper ations —Continued Front High or Front Wide Speaker s When “Speakers T ype(FrontB) ” setting is set to “Not Use”, you can select the priority of the use of Front High or Front W ide speakers. Notes: • Front High or Front W ide speakers cannot be selected in either of the following cases: 1. “Speaker s T ype(FrontB) ” is[...]

71 Basic Operations —Continued Using the Ea sy macro comm and in the Ea sy macro mode, you can sequentially operate Onk yo components with simple com mands by simply pressing one b utton. These commands are user-spe cif iable (see page 150) and the default actions are described belo w . Press the A CTIVITIES b uttons to start the Easy macro comm [...]

72 Basic Oper ations —Continued Changing Sour ce Component When you want to operate th e component that is not assigned as the source component, you can assign it as the source component. F or the default assignment, see page 151. Restoring Default (3 seconds) While holding do wn the REMO TE MODE b utton, press and ho ld down the [MY MO VIE], [MY[...]

73 Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can st ore your fav orite stations as presets for quick selectio n. Listening to the Radio T uning into Rad io Stations ■ A uto T uning Mode When tuned into a station, the TUNED indicator appears. When tun ed into a stereo FM statio n, the FM STEREO in[...]

74 Listening to the Radio —Continued Y ou can store a combination of up to 40 of your fa vorite AM/FM radio stations as presets. Note: Y ou can name your radio presets for easy identif ication (see page 105). Its name is di splayed instead of the band and frequency . Selecting Presets Deleting Presets Presetting AM/FM Stations 1 T une into the AM[...]

75 Listening to the Radio —Continued RDS only works in ar eas where RDS br oadcasts are ava i la b le . When tuned into an RDS st ation, the RDS indicator appears. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radi o signals. It w as dev eloped by the European Bro adcasti ng Union (EBU) and is a v ai[...]

76 Listening to the Radio —Continued When tuned to an RDS station that’ s broadcasti ng te xt information, the text can be displayed. Display ing Radio T ext (RT) Notes: • The message “ W aiting ” may appear whil e the A V receiv er waits for the R T information . • If the me ssage “ No T e xt Data ” appears on the display , no R T [...]

77 Univer sal P or t Option UP-A1 Dock f or iP od W ith the UP-A1 Dock (sold separately), you can easily play the music, photo, or movie stored on your Apple iPod through the A V receiver and enjoy great sound. Y ou can use the A V recei ver’ s remote controller to operate your iPod. For inf ormation about which iPod models ar e sup- ported by th[...]

78 Universal P or t Option UP-A1 Dock f or iP od —Contin ued By pressing the REMO TE MODE button that’ s been programmed with the remote contr ol code for your Dock, you can control your iPod in the Dock with the follow ing buttons. The [POR T] button is preprogrammed with the remote control code for controlling a Dock with Uni versal Port conn[...]

79 Universal P or t Option UP-A1 Dock f or iP od —Contin ued Status messa ges ❏ PORT Reading The A V receiv er is checking the connection with the dock. ❏ PORT Not Support The A V receiv er do not support the connected dock. ❏ PORT UP-A1 UP-A1 Dock is connected. Notes: • The A V recei ver displays the message “UP-A1” fo r sev eral sec[...]

80 Recor ding This section explains ho w to record t he selected input source to a component with recording capability , and how to r ecord audio and video from dif ferent sources. Notes: • The surround sound and DSP listening modes cannot be recorded. • Copy-protected D VDs cannot be recorded. • Sources connected to a digital input cannot be[...]

81 Using the Listening Modes See “ About the Listening Modes” on page 89 for detailed information a bout the listening modes. Selecting on th e A V receiver ■ [PURE A UDIO] button This button selects the Pu re Audio listening mode. When this mode i s selected, the A V receiv er’ s dis- play is turned off and only video signals input through[...]

82 Using the Listening Modes —Continued Mono/Multiplex Sour ces ✔ : A vailable Listening Modes Notes: *1 For 7ch output, o utput can be s witched betwe en Front hig h or Front wide s peakers by pressin g the [SP LA YOUT] button (depend ing on the “Speaker Configuration” setting (see page 95)). *2 For 9ch output, output can be switched betwe[...]

83 Using the Listening Modes —Continued Stereo Sour ce (1/2) ✔ : A vail able Li stening Modes Listening Mo de B utton Speaker lay out Pure Audio *5 ✔✔✔✔ Direct ✔✔✔✔ Stereo ✔✔✔✔ Mono ✔✔✔✔ PLII/PLIIx Movie* 3 ✔✔✔ PLII/PLIIx Music* 3 ✔✔✔ PLII/PLIIx Game* 3 ✔✔✔ PLIIz Height ✔ Neo:6 Cinema ✔✔?[...]

84 Using the Listening Modes —Continued Stereo Source (2/2) ✔ : A vailable Listening Modes Notes: *1 For 7ch output, o utput can be s witched betwe en Front hig h or Front wide s peakers by pressin g the [SP LA YOUT] button (depend ing on the “Speaker Configuration” setting (see page 95)). *2 For 9ch output, output can be switched between t[...]

85 Using the Listening Modes —Continued 5.1 chan nel Sourc es (1/3) ✔ : A vail able Li stening Modes Listening Mo de B utton Speaker lay out Pure Audio *5 ✔✔✔✔ Direct ✔✔✔✔ Stereo ✔✔✔✔ Mono ✔✔✔✔ DolbyDigital/ DolbyDigital Plus/T rueH D/ Multichannel/ DTS/ DTS 96/24 *6 / DTS Express/ DTS-HD High Resolution Aud i o [...]

86 Using the Listening Modes —Continued 5.1 channel Sour ces (2/3 ) ✔ : A vailable Listening Modes Listening Mode Button Speaker lay out PLIIx Music THX Music ✔ PLIIx Music Au dy s s ey D S X ✔ *2 PLIIz Height THX Music ✔ Neo:6 THX Music ✔ Neural THX Music ✔ THX Games ✔✔ PLIIx Height THX Games ✔ Neo:6 THX Games ✔ Neural THX Ga[...]

87 Using the Listening Modes —Continued 5.1 chan nel Sourc es (3/3) ✔ : A vail able Li stening Modes Notes: *1 For 7ch output, output can b e switched between Fron t high or Fro nt wide spea kers by pressing the [ SP LA YOUT] button (dependi ng on the “Speak er Conf iguration” settin g (see page 95)) . *2 For 9ch output, o utput can be s wi[...]

88 Using the Listening Modes —Continued 7.1 channe l Source s ✔ : A vailable Listening Modes Listening Mode Button Speaker lay out Pure A udio* 5 ✔✔✔✔ Direct ✔✔✔✔ Stereo ✔✔✔✔ Mono ✔✔✔✔ Multichannel/ DolbyDigital Plus/T rueHD/ DTS-HD High Resolution Audio/DTS-HD Master Au dio/ DTS-ES Discrete* 6 / DTS-ES Matrix* 6[...]

89 Using the Listening Modes —Continued Notes: *1 For 7ch output, output can b e switched between Fron t high or Fro nt wide spea kers by pressing the [ SP LA YOUT] button (dependi ng on the “Speak er Conf iguration” settin g (see page 95)) . *2 For 9ch output, o utput can be s witched bet ween the combi nation of Surro und back and Front hig[...]

90 Using the Listening Modes —Continued 5.1-channel sour ce + Dolby EX These modes expand 5.1-channel sources for 6.1/7.1- channel playback. They’ re espe cially suited to Dolby EX soundtracks that include a matrix-encoded surround back channel. The additiona l channel adds an extra dimension and provides an en v eloping surround sound experien[...]

91 Using the Listening Modes —Continued THX Founded b y George Lucas, T HX de velops stringent stan- dards that ensure movies are reproduced in movie the- aters and home theaters just as the director intended. THX Modes carefully optim ize the tonal and spa tial characteristics of the soundt rack for reproduction in the home-theater en vironment.[...]

92 Adv a nced Setup The onscreen setup menus appear on the connected TV and pr ovide a con venient w ay to change the A V recei ver’ s var ious settings. Se ttings are or ganized into nine categories on the main menu , most containing a submenu . Onscreen Setup Menus 1. Input/Output Assign 2. Speaker Setup 3. Audio Adjust 4. Source Setup 5. Liste[...]

93 Adv anced Setup —Contin ued This section explains items on the “Input/Output Assign” menu. Note: This procedure can also be performed on the A V recei ver by using its [SETUP] bu tton, arrow b uttons, and [ENTER] button. Input/Output Assign 1 Press the [RECEIVER] button f ollowed by the [SETUP] b utton. The main menu appears onscreen. If t[...]

94 Adv anced Setup —Continued Component Video Input See “Component V ideo I nput Setup” on page 55. Digital A udio Inp ut See “Digital Audio Input Setup” on page 56. Analog A udio Input Multich See “ Analog Audio Input Setup” on page 57. Subwoofer Input Sensitivity 0d B ( d e f a u l t ) , 5d B , 1 0d B , 1 5d B Some D VD players outp[...]

95 Adv anced Setup —Contin ued Some of the settings in this sectio n are set automatically b y Audyssey MultEQ ® XT Room Correction and Speaker Setup (see page 61). For Speakers B, you need to change the settings manually . Here you can check the setti ngs made by Audyssey MultEQ ® XT Room Correction and Sp eaker Setup, or set them manually , w[...]

96 Adv anced Setup —Continued Surr Back Ch *8 1ch: Select if only one surround back L speaker is connected. 2ch: Select if two (left and right) surround back speakers are connected (def ault). LPF of LFE (Low-P ass Filter for the LFE Channel) 80Hz(THX) (default), 9 0Hz, 100Hz, 120Hz This setting is not set automati cally by Audyssey M ultEQ ® XT[...]

97 Adv anced Setup —Contin ued Speaker Distance This setting is set automati cally by Audyssey M ultEQ ® XT Room Correction and Sp eaker Setup (see page 61). Here you can specify the distance from each speaker to the listening position so that the sound from each speak er arri ves at the listener’ s ears as the sound designer intended. Y ou ca[...]

98 Adv anced Setup —Continued Equalizer Settings This setting is set automatically b y Audyssey MultEQ ® XT Room Correction and Speaker Setup (see page 61). W ith the Equalizer settings, you can adjust the tone of speakers indi vidually wi th a 7-band equalizer . The volume of each speaker can be set on th is page. The Equalizer setti ngs only a[...]

99 Adv anced Setup —Contin ued THX Audio Setup This setti ng is not set automatical ly by Audyssey MultEQ ® XT Room Correction and Speaker Setup (see page 61). W ith the “SurrBack Sp Spacing” setti ng, you can specify the distance betw een your surround back speakers. This setting is used by Spe a ker s A a nd S pea ker s B. If you’ re usi[...]

100 Adv anced Setup —Continued W ith the Audio Adjust functions and settings, you can adjust the sound and li stening modes as you like. Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. A udio Adjust 1 Press the [RECEIVER] button f ollowed b y the [SETUP] button. Th[...]

101 Adv anced Setup —Contin ued Center Width 0 to 7 (default: 3) W ith this setting, you can adjust the width of the sound from the center speak er when using the Dolby Pro Logic IIx Music listening mode. Normally , if you’ re using a cent er speaker , the center chann el sound is output by only the center speaker . (If you’ re not using a ce[...]

102 Adv anced Setup —Continued Au dy s s ey For “Dynamic EQ”, “R eference Lev el” and “Dynamic V olume”, you cannot chan ge the settings before completing Audyssey MultEQ ® XT Room Correctio n and Speaker Setup. Audysse y settings cannot be adjusted while Speakers B is selected. Dyn ami c EQ Off: Audyssey Dynamic EQ™ off (def ault)[...]

103 Adv anced Setup —Contin ued Theater-Dimensio nal Listening Angle Wide : Select if the listening angle is greater than 30 de grees (default). Narrow: Sele ct if the li stening angl e is less than 30 degrees. W ith this setting, you can optimize the Theater-Dimen- sional listening mode by specifying the angle of the fron t left and right speake[...]

104 Adv anced Setup —Continued This section explains items on the “Source Setup” me nu. Items can be set indi vidua lly for each input sele ctor . Note: This procedure can also be perform ed on the A V recei ver by using its input selector buttons, [SET UP] button, arrow b uttons, and [ENTER] button. Sour ce Setup 1 Press the input selector b[...]

105 Adv anced Setup —Contin ued Name Edit Y ou can enter a custom name for each individual input selector (e xcluding TUNER) and radi o preset for easy identi- fication. When entered, the custom name will appear on the display . Notes: • T o name a radio preset, use the [TUNER] b utton to sel ect AM or FM, and t h en select the preset (see page[...]

106 Adv anced Setup —Continued Zoom Mode This setting determine s the aspect ratio. Normal: Full: (default) Zoom: Wide Z oo m:[...]

107 Adv anced Setup —Contin ued ISF Mode Custom: User setting (All items can be freely set.) Day: Setting when a room is bright. Night: Setting when a room is dark. The receiv er has been designed to incorporate setup a nd calibration standards esta blished by the Imaging Sci- ence F oundation (ISF). The IS F has de velop ed carefully crafted, in[...]

108 Adv anced Setup —Continued Resolution *2 Through: Select this to pass video through the A V receiv er at the same resolution and with no con version (default). Au t o : Select this to have the A V receiv er automatically con vert video at resolutions not supported b y your TV . When the “Monitor Out” is set to “Analog”, this setting w[...]

109 Adv anced Setup —Contin ued Y ou can assign a def ault listening mode to each input source that will be selected automati cally when you select each input source. For e xample, you can set the default listening mode to be used wi th Dolby Digital in put signals. Y ou can select other listening mode s during playback, b ut the mode specif ied [...]

110 Adv anced Setup —Continued This section explains the item s on t he “Miscellaneous” menu. Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. Miscellaneous (V olume/OSD) Setup 1 Press the [RECEIVER] button f ollowed b y the [SETUP] button. The main menu appears[...]

111 Adv anced Setup —Contin ued . This section explains items on the “Hardw are Setup” menu. Note: This procedure can also be performed on the A V recei ver by using its [SETUP] bu tton, arrow b uttons, and [ENTER] button. OSD Setup Immediate Display On: Displayed (def ault). Off: Not displayed. This preference determines whether operation de[...]

112 Adv anced Setup —Continued Remote ID Remote ID 1, 2, 3 When sev eral Onkyo components are used in the same r oom, their remote ID co des may ov erlap. T o differ en- tiate the A V receiv er from the other components, you can change its remote ID from 1, the default, to 2 or 3. Changing the Remote Controller’ s ID 1 While holding do wn the [[...]

113 Adv anced Setup —Contin ued HDMI A udio TV Out Off : HDMI audio is not output to TV (default). On: HDMI audio is output to TV and the sound will be heard from the TV speakers. This preference determines whether audio receiv ed at the HDMI i nput is output from the HDMI outputs. Y ou may want to turn this preference on if your TV is c onnected[...]

114 Adv anced Setup —Continued HDMI Control (RIHD) O n: en abled. Off: disabled (default). This function allows -compatibl e components connected via HDMI to be controlled with the A V receiver. Notes: • , which stands for Remote Interacti ve ov er HDMI, is the name of the system control function found on Onkyo components. The A V receiv er can[...]

115 Adv anced Setup —Contin ued Network See “Network Settings” on page 126. Firmware Update Notes: • Perform the f irmware update only when an announcement is posted on the Onkyo W eb site. • It takes about 60 minutes to complete the firmware update. • (TX-NR5007) When updating a firmware from a USB mass storag e de vice, the A V receiv[...]

116 Adv anced Setup —Continued W ith this preference, you ca n protect your settings b y locking the setup menus. Note: This procedure can also be performed on the A V receiver by using its [SETUP] b u tton, arro w buttons, and [ENTER] button. The digital input signal formats are av ailable only for the input sources that you ha ve assigned a dig[...]

117 Adv anced Setup —Contin ued Y ou can change v arious audio settings by pressing the [A UDIO] button. Note: When the “Audio TV Out ” setting is set to “On” (page 113), the [A UDIO] b utton is disabled. Using the A udio Settings A UDIO RECEIVER qwer 1 Press the [RECEIVER] button f ollowed b y the [A UDIO] b utton. The audio setting item[...]

118 Adv anced Setup —Continued Re-EQ Function W ith the Re-EQ function, you can compensate a soundtrack whose high-frequency con tent is too harsh, making it more suitable for home theater vie wing. Re- EQ Off: Re-EQ Function off (default). On: Re-EQ Function on. This function can be used with the following listening modes: Dolby Digita l, Dolby [...]

119 Adv anced Setup —Contin ued Speaker Levels Y ou can adjust the v olume of each spea ker while listening to an input source. These temporary adjustments are cancelled when the A V receiv er is set to Standby . T o sav e the setting you made here, go to “Lev el Calibration” on page 97 before setting the A V receiv er to Standby . Subw oofer[...]

120 NET/USB The A V recei ver is network-r e ady , which means you can hook it up to your home network with a standard Ether- net cable and enjoy the music files stored on your com- puter or media server . If your network is connected to the Internet, you can also enjo y Internet radio. Netwo rk Requirements ■ Ethernet Netw ork The A V receiver?[...]

121 NET/USB —Continued T o receiv e Internet radio, you must connect the A V receiver to a netw ork with Internet access (page 120). Y ou can select Internet radi o stations b y connecting to the A V receiv er from your co mputer and selecting sta- tions in your W eb bro wser . Preset up to 40 Internet radio stations. Internet radio URLs in th e [...]

122 NET/USB —Continued This section explains ho w to play music f iles on a com- puter or media server through the A V receiver. See pages 124 to 125 for details on supported music servers and music file formats. For W indo ws Media Player 11, see “W indows Media Player 11 Setup” on page 123. Playin g Music Files on a Server 1 Start your comp[...]

123 NET/USB —Continued Random Playback The Random function can only be set while the PLA Y screen is displayed. T o play songs in random order, during playback (or while playback is paused or stopped), press the [RAN- DOM] b utton. All of the songs in the current folder wil l be played in random order . When all of the songs in the folder hav e b[...]

124 NET/USB —Continued Supported Audio File Formats For serv er playback, the A V receiver supports the fol- lowing music file formats: MP3, WMA, W A V , FLA C, Ogg V orbis, AAC and LPCM. ■ MP3 • MP3 f iles must be MPEG -1/MPEG-2 Audio Layer 3 format with a sampling ra te of 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 k[...]

125 NET/USB —Continued Server Requirements The A V receiv er can play digi tal music files stored on a computer or media server and supports the follo wing technologies: • W indo ws Media Player 11 • W indo ws Media Connect 2.0 • DLN A-certif ied media serv er If the operating system of your computer is W indows V ista, W indows Media Playe[...]

126 NET/USB —Continued Note: When modifying netw ork settings, after modifying it is necessary to ex ecute “Sa ve”. This section explains ho w to conf igure the A V receiver ’ s network settings manually . If your router’ s DHCP serv er is enabled, you don’t need to change an y of these se ttings, as the A V receive r is set use DHCP to[...]

127 NET/USB —Continued Mac Address This is the A V recei ver’ s MA C (Media Access Control) address. This addres s cannot be changed. DHCP This setting determines whet her or not the A V receiver uses DHCP to automatical ly config ure its IP Address, Subnet Mask, Gate way , and DNS Server settings. Enable: DHCP enabled. Disable: DHCP disabled. [...]

128 NET/USB —Continued This section explains ho w to play music f iles on a USB mass storage device. Playin g Music Files on a USB Device 1 Plug your USB mass storage devi ce into the A V receiver’ s USB por t. 2 (TX-NR3007) Press the [NET/USB] button repeatedly to select the USB screen. (TX-NR5007) Press the [NET/USB] button repeatedly to sele[...]

129 NET/USB —Continued Random Playback The Random function can only be set while the PLA Y screen is displayed. T o play songs in random order , while the list of songs is displayed, press the [RANDOM] button. All of the songs in the current folder will be played in random order . When all of the songs in the folder ha ve been played once, they?[...]

130 Multi Zone Y ou can use three speaker systems with this A V recei ver — Main r oom: a surround-sound speak er system (up to 9.2 channels) for enjoying D VD mo vies in your main room, Speak ers B : a pair of stereo speakers for serio us music listening in your main room, Zone 2: a stereo speaker system in a second room, Zone 3: a ster eo speak[...]

131 Multi Zone —Continued In addition to your main listening room, you can also enjoy pl ayback in the other room, or as we call Multi Zone. And, you can select a different source for each room. There are two ways you can connect Zone 2 speakers: 1. Connect them directly to the A V receiv er. 2. Connect them to an amp in Zone 2. Connecting Y our [...]

132 Multi Zone —Continued Zone 2 Video Outpu t The A V receiv er features a composite video output for connection to a TV in Zone 2, so you can enjo y both audio and video in that zone. Hookup • Use a composite video cable to connect the A V receiv er’ s ZONE 2 OUT V ja ck to a composite video input on your Zone 2 TV . Note: The ZONE 2 OUT V [...]

133 Multi Zone —Continued There are two ways you can connect Zone 3 speakers: 1. Connect them directly to the A V receiv er. 2. Connect them to an amp in Zone 3. Connecting Y our Zone 3 Speaker s Directly to the A V receiver This setup allo ws 7.2-cha nnel playback in your main room and 2-channel stereo playback in Zone 3, with a diff erent sourc[...]

134 Multi Zone —Continued If you’ v e connected your Zone 2/3 speakers to the A V receiv er, as explained in “Connecting Y our Zone 2 Speakers Directly to the A V receiv er” on page 131 or “Connecting Y our Zone 3 Speakers Directly to the A V receiv er” on page 133, you must set the “Powered Zone2” or “Po wered Zone3” setting to[...]

135 Multi Zone —Continued Note: This procedure can also be performed on the A V recei ver by using its [SETUP] bu tton, arrow b uttons, and [ENTER] button. ■ Zone2/3 Out If you’ v e connected your Zone 2/3 speakers to an amp with no volume control, set the “Zone2 Out” and “Zone3 Out” setting, re specti vely , to “V ariable” so tha[...]

136 Multi Zone —Continued This section explains ho w to turn Zone 2/3 on and of f, how to selec t an input sour ce for Zone 2/3, and ho w to adjust the v olume for Zone 2/3. Contro lling Zone 2/3 fr om the A V rec eiver Note: When Zone 2/3 is turned off, the output from the 12V TRIGGER OUT ZONE 2/3 goes low (0 volts). Controlling Zone 2/3 with th[...]

137 Multi Zone —Continued Notes: • Only analog input sources are output b y the ZONE 2/ 3 PRE OUT and ZONE 2/3 L/R speaker terminals. Digital input sources are not output. If no sound is heard when an input source is select ed, check if it’ s connected to an analog input. • Y ou cannot select dif ferent AM or FM radio stations for your main[...]

138 Multi Zone —Continued T o control the A V rec eiv er with the remote controll er while you’ re in Zone 2 or Zo ne 3, you’ll need a commer- cially a va ilable multiroom remot e control kit for e ach zone. • Multiroom kits are made b y Niles and Xan tech. These kits can also be used when there isn’t a clear line of sight to the A V rece[...]

139 Contr olling Other Components Y ou can use the A V recei ver’ s remote control ler (RC-747M) to control your other A V components, including those made by ot her manufacturers. This sec- tion explains ho w to enter th e remote control c ode for a component that you want to control: D VD, TV , VCR, etc. • Learn commands directly from another[...]

140 Controlling Other Components —Contin ued 5 Use the Up and Down [ q ]/[ w ] but- tons to select category , and then press [ENTER]. The brand name input panel appears. 6 Use the arro w [ q ]/[ w ]/[ e ]/[ r ] but- tons to select a character , and then press [ENTER]. Repeat this step from the 1st charac ter to the 3rd character of the brand name[...]

141 Contr olling Other Components —Continued Y ou’ ll need to enter a code for each component that you want to control. Note: The remote control codes provided are correct at t he time of printing, but are subject to change. Entering Remote Contr ol Codes REMO TE MODE DISPLA Y Number but to ns 1 Look up the appropriate remote control code in th[...]

142 Controlling Other Components —Contin ued Onkyo components that are connected via u are con- trolled by pointing the remo te controll er at the A V receiv er, not the component. Th is allo ws you to control components that are out of vie w , in a rack, for example. If you want to control an Onk yo component by pointing the remote contro ller d[...]

143 Contr olling Other Components —Continued By pressing the [TV] button that’ s been programmed with the remote control code for TV , you can control your TV with the following b uttons. For details on entering a remote control code for a differ- ent component, see page 141. The [TV] b utton is preprogrammed with the remote con- trol code for [...]

144 Controlling Other Components —Contin ued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your D VD player (HD D VD, Blu-ray , or TV/D VD combination), you can control your player w ith the follo wing bu ttons. The [D VD/BD] button is preprogrammed with the remote control code for controlling an O[...]

145 Contr olling Other Components —Continued t PLA Y MODE b utton* Selects play modes on components with selectable play modes. u CLR button Cancels functions and cl ears entered numbers. Notes: • W ith some components, certain b uttons may not work as expected, and some may not work at all. • If you enter the remote control code for a HD DVD[...]

146 Controlling Other Components —Contin ued By pressing the REMO TE MODE button that’ s been programmed with the remote control code fo r your sat- ellite receiver , cable receiver , or D VD recorder (DBS/ PVR combination or cable/ PVR combination), you can control your player with the follo wing buttons. For detail s on entering a remote cont[...]

147 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your CD player , CD recorder , or MD recorder , you can control your player with the follo wing buttons. The [CD] bu tton is preprogrammed with the remote con- trol code for controlling an Onkyo CD player . F[...]

148 Controlling Other Components —Contin ued By pressing the REMO TE MODE button that’ s been programmed with the remote contr ol code for your Dock, you can control your iPod in the Dock with the follow ing buttons. For some RI docks, the [ON], [ST ANDBY] button may not work with a re mote control code 82990 (without u ). In this case, make an[...]

149 Contr olling Other Components —Continued r PLA Y MODE b utton Selects play modes on components with selectable play modes. W orks as a Resume button when used with a DS-A2 RI Dock. s RANDOM button Used with the shuffle function. Note: W ith some components, certain b uttons may not work as expected, and some may not w ork at all. By pressing [...]

150 Controlling Other Components —Contin ued V ia onscreen menu, you can spec ify what actions will be taken by the Easy macro command in the Easy macro mode. Activities Setup 1 Press the [RECEIVER] b utton fol- lowed b y the [SETUP] button. The main menu a ppears o nscreen. If the main menu doe sn’t appear , make sure the appropriate external [...]

151 Contr olling Other Components —Continued Here ar e the default settings. Source Play Enable: Start playback the source of “Enable”. Disabl e: Start playback the source of “Disable”. This option enables the Source to start playback when the A CTIVI- TIES button is pressed. Items Default Settings My Movie My TV My Music Source DV D C B [...]

152 Controlling Other Components —Contin ued The A V recei ver’ s remote controller can le arn the com- mands of other remote controllers. By tra nsmitting, for example, the Play command from your CD player’ s remote controller , the remote controller can learn it, a nd then transmit the exact same comm and when its Play [ 1 ] button is press[...]

153 Contr olling Other Components —Continued Y ou can pro gram the remote controller’ s A C TIVITIES buttons to perform a sequence of remote control actions. Example: T o play a CD you typically need to perform the follow- ing actions: 1. Press the [RECEIVE R] button to se lect the Recei ver remote controller mode. 2. Press the [ON] b utton to [...]

154 T roub leshooting If you hav e any trouble using the A V recei ver, look for a solution in this section. If you can’ t resolve the issue yourself, contact your Onkyo dealer . Can’t turn on the A V rec eiver • Make sure that the po wer cord is properly plugged into the wall outle t. • Unplug the po wer cord from the wall outlet, wait f i[...]

155 T r oubleshooting —Contin ued The surround speakers pr oduce no sound • When the DTS Surround Sensation, T -D (Theater- Dimensional), Stereo or Mono listening mode is selected, the surround speakers pro duce no sound. • Depending on the source and current listening mode, not much sound may be produ ced by the su rround speakers. T ry sele[...]

156 T r oubleshooting —Continued • W ith some CD and LD players, you won’t be able to playback DTS material pr operly ev en though your player is connected to a digital input on the A V receiv er. This is usually because the DTS bitstream has been processed (e.g., output lev el, sampling rat e, or frequency respo nse change d) and the A V rec[...]

157 T r oubleshooting —Contin ued The remote contr oller doesn’t wo rk • Make sure tha t the batteries are installed with the cor- rect polarity (page 14). • Install ne w batteries. Don’ t mix different types of bat- teries, or old and ne w batteries (page 14). • Make sure tha t the remote controller is not too far aw ay from the A V re[...]

158 T r oubleshooting —Continued Can’t record • On your recorder , make sure the co rrect input is selected. • T o pre vent signal loops and damage to the A V receiv er, input signals are not fed through to outputs with the same name (e.g., T APE IN to T APE OUT or VCR/D VR IN to VCR/D VR OUT). • When the Pure Audio liste nin g mode is se[...]

159 T r oubleshooting —Contin ued The f ollowing se ttings can be made f or the S- Video, composite video an d COMPONENT VIDEO inputs Y ou must use the b uttons on the A V receiver to mak e these settings. 1. While holding do wn the input selector b utton for the input source that you want to set, press the [SETUP] bu tton. 2. Use the Left and Ri[...]

160 Specifications (TX-NR3007) Amplifier Section Video Section Tu n e r S e c t i o n General ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Contr ol T erminal Specifications and features ar e subject to change without notice. Rated Output Power All channe ls: North American: 140 watts mini mum continuous power per chann [...]

161 Specifications (TX-NR5007) Amplifier Sect ion Video Section T uner Sectio n General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Control T ermi nal Specifications and features ar e subject to change without notice. Rated Output Power All channels: North American: 145 watts minimu m continuous power per channe l, 8[...]

162 Video Resolution Char t The following tables sho w how vide o signals at different resolutions are output by the A V receiver. *1: The output i s limited to 480p for an effectiv e signal i n the effect of Macr ovision. *2: The output i s limited to 576p for an effectiv e signal i n the effect of Macr ovision. ✔ : Output NTSC HDMI COMPONENT S-[...]

163 Memo[...]

164 SN 29400059 Y0907-1 (C) Copyright 2009 ONKY O CORPORA TION Japan. All rights reserved. http://www.onkyo.com/ HOMEPAGE Sales & Product Planning Div . : 2-1, Nisshin-cho , Ney agawa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U .S.A. CORPORA TION 18 P ark Wa y , Upper Saddle Riv er , N.J. 07458, U.S .A. T el: +1-[...]