Pioneer DV-343 manuel d'utilisation

DV -343 Operating Instructions DVD PLA YER[...]

2 En CONGRA TULA TIONS ON YOUR PURCHASE OF THIS FINE PIONEER PRODUCT . Pioneer is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. We are sure you will be fully satisfied with the DVD player . Thank you for your support. IMPORT ANT NOTICE [For U.S. model] The serial number f[...]

3 En Please read through these operating instructions so you will know how to operate your model properly . After you have finished reading the instructions, put them away in a safe place for future reference. • This player is not suitable for commercial use.[...]

4 En Features of This Player Compatible with DVD, Video CD and CD formats DVD, Video CD and CD discs that display the logos shown below can be played back on PIONEER DVD players. For more information on discs compatible with this player , refer to the table below . The disc format logos shown above are found on disc labels or on disc jackets. • T[...]

5 En Wide range of DVD viewing options Multi-Angle ( page 30 ) Y ou can view scenes from different camera angles when watching movies or other media with multiple angle playback available. Multiple Languages ( page 32 ) Y ou can select the language on when watching movies or other media that have multiple language and/or audio soundtracks recorded [...]

6 En How to Proceed in This Manual DVD is an incredible format that presents the highest quality digital audio and video available today . The amount of information that can be recorded onto a DVD disc is remarkable, allowing it to offer numerous functions and features available with no other format. Because using the DVD player and DVDs may be con[...]

7 En T able of contents Before Using ........................................ 8 Checking Accessories ..................................... 8 Preparing the Remote Control ......................... 8 Names and Functions ......................... 9 Front Panel ...................................................... 9 Display Window ....................[...]

8 En Preparing the Remote Control Inserting batteries into the remote control 1 While pushing the tab on the battery compartment cover toward the center of the remote, pull out in the direction indicated by the arrow. 2 Insert batteries. Make sure to match the plus (+) and minus ( – ) polarity guides on the batteries with the marks inside the bat[...]

9 En Names and Functions 1 STANDBY/ON switch Press to switch the player on or to put in standby ( pages 20, 23 ). 2 Disc tray When loading a disc, place discs in the disc tray with the label side facing up ( pages 20, 23 ). 3 0 (open/close) button Press to open and close the disc tray ( pages 20, 23 ). 4 7 (stop) button Press to stop playback. Pres[...]

10 En Display Window 1 VCD indicator Lights when a Video CD is loaded. 2 TITLE indicator Indicates a title number is being displayed. 3 DVD indicator Lights when a DVD is loaded. 4 CD indicator Lights when an audio CD is loaded. 5 indicator Indicates that the Repeat function is on and that the current title, chapter, or track is being repeated ( pa[...]

11 En Rear Panel 1 AUDIO OUT jacks Use to output two-channel audio (analog) to the audio stereo inputs on a TV or stereo amplifier. If you are connecting to a receiver that has both digital and analog input jacks for DVD player connection, it may be beneficial to make both connections ( pages 14, 15 ). 2 VIDEO OUT jack Connect to the video input on[...]

12 En (Buttons indicated with * are used for menu operation.) 1 LAST MEMORY button You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the player. Press LAST MEMORY during playback to set a Last Memory point. When you want to resume playback of that disc, press LAST MEMORY in the stop mode and pl[...]

13 En _ PLAY 3 button Press to start disc playback ( pages 20, 23 ). + PAUSE 8 button Press to pause playback of a disc. Press again to resume playback ( page 38 ). ¡ 1 REV FWD ¡ (fast reverse/forward) buttons During playback of DVD and Video CD, press FWD ¡ to perform fast forward scanning. Press REV 1 to perform fast reverse scanning of DVD an[...]

14 En Making Connections Connection Guide The illustration on this page shows the basic setup using the audio and video cords included with this player . Use this illustration as a guide to setting up your home system. An explanation of each type of audio and video connection available can be found on pages 1 5 to 16 . T o determine the best audio [...]

MAKING CONNECTIONS 15 En Audio Connections This player features two digital (optical and coaxial) and also analog audio output formats. Digital Audio Connections Y ou can enjoy the digital audio recorded on DVD discs from both optical digital and coaxial digital output jacks. When making digital audio connections, do not make connections from both [...]

16 En V ideo Connections This player features S-video, composite, and component video output possibilities. Check the manual supplied with your TV or monitor to determine the best possible connection for your system. In addition to making physical connections to your TV or monitor , it is also necessary to assign the TV screen size. Y ou can use th[...]

MAKING CONNECTIONS / SETTING UP THE PLA YER 17 En Setting Up the Player Using the Setup Navigator The Setup Navigator has been designed to simplify the process of getting the DVD player ready to perform. Designed as a series of on-screen multiple-choice questions, the Setup Navigator automatically sets the audio, video, and language settings accord[...]

18 En Setting the OSD Language (On-Screen Display Language) The [OSD Language] screen establishes the OSD language, or on-screen display language, which refers to the language that is used by the player in menus and on-screen messages. Additionally , the language that is established at this setting will also be used for the default audio and subtit[...]

SETTING UP THE PLA YER 19 En Audio1 Audio2 General Language Video Setup Navigator Move Exit SETUP Select ENTER Exit Setup Navigator Start Again Delete Changes Save Changes Confirming the settings The [Exit Setup Navigator] is the final screen in the Setup Navigator . Settings: Save Changes* Select to have the player make all of the necessary audio,[...]

20 En 1 Press ( STANDBY/ON on the front panel). 2 Press OPEN/CLOSE ( 0 on the front panel). The disc tray comes out. 3 Load a disc. • Load a disc with the label side facing up, using the disc tray guide to align the disc. 4 Press PLAY 3 ( 3 on the front panel). • The disc tray closes, and playback begins. • Depending on the disc, a menu may b[...]

21 En GETTING ST ARTED USING YOUR DVD PLA YER When a menu screen is displayed Menu screens are displayed for DVDs that have menu screens or Video CDs that include Playback Control (PBC). DVDs often contain extra information that can be accessed in the DVD menu and sometimes makes navigating DVD menu screens as enjoyable as watching the feature pres[...]

22 En Advancing to the next chapter (track) Press NEXT ¢ ( ¡ ¢ on the front panel). • Press to skip forward to the next chapter (track). • You can advance more than one chapter (track) forward by pressing and holding NEXT ¢ and releasing when the desired chapter (track) number appears in the display. Skipping back to the previous chapter (t[...]

23 En GETTING ST ARTED USING YOUR DVD PLA YER 1 Press STOP 7 ( 7 on the front panel). Playback stops. 2 Press OPEN/CLOSE ( 0 on the front panel). The disc tray comes out. 3 Remove the disc. 4 Press ( STANDBY/ON on the front panel). The disc tray goes back in. 0 4 ¢ 1 ¡ 7 8 3 Stopping Playback and Switching Power Off – DVD/Video CD/CD RANDOM PRO[...]

24 En (Example) (Example) 1 Press STANDBY/ON on the front panel ( on the remote control) 2 Press SETUP . The Setup screen appears. 3 Use the cursor buttons ( 2 / 3 ) to select the menu you want. As each menu is selected with the cursor, the settings appear below the menu heading. 4 Use the cursor buttons ( ∞ ) to enter the menu. The top item with[...]

25 En ADJUSTING AUDIO AND VIDEO SETTINGS Changing to the Setup Screen “Expert” Menu Mode The Setup screen menus are divided into two levels, [Basic] and [Expert] , to make this unit more convenient to operate for different levels of users. The [Basic] menu mode contains functions that may be considered necessary for the basic operations of this[...]

26 En Setting the Digital Audio Output T o Be Compatible with Y our A V Component – DVD This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio 1 menu to reflect the capabilities of the components that you have made digital connections to. Not[...]

27 En ADJUSTING AUDIO AND VIDEO SETTINGS Digital Out Expert Depending on your preferences and the type of connections made, you may opt not to have the digital audio signal output at all. When this setting is set to [Off] there is no signal output from the digital audio output jacks. Make changes to the [Digital Out] setting in the Setup screen Aud[...]

28 En Setting the TV Screen Size The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is 16:9. This width-to-height ratio is called the aspect ratio. When viewing software recorded in different aspect ratios, the image ’ s height to width ratio can be switched to match the TV[...]

29 En ADJUSTING AUDIO AND VIDEO SETTINGS Selecting Picture Quality Appropriate for Program Content – DVD/Video CD This lets you select the ideal picture quality for watching movies, animation and other video media. Make changes to the [Picture Quality] setting in the Setup screen Video menu. Settings: Cinema Provides a sharp, clear black picture [...]

30 En « V iewing from a Desired Camera Angle (Multi-Angle) – DVD Y ou can select a camera angle when viewing DVDs with the multi-angle option. Press ANGLE during playback. The camera angle changes each time you press the button. Notes • You can use the Multi-Angle function only with discs featuring recordings of images shot from different came[...]

31 En Setting the Language Options DVDs have the capacity to contain a great deal of audio information, which includes the ability to hold up to 8 different language tracks and subtitle information in as many as 32 different languages. This section outlines the variety of audio language and subtitle options available with this player . Notes • DV[...]

32 En Audio : 1/L Audio : 2/R Audio : Stereo Changing Audio Type – Video CD/CD For enjoyment of karaoke or similar format Video CDs and CDs, it is possible to select stereo audio, or either right or left channel mono depending on the requirements of the source. Press AUDIO repeatedly during playback to switch the audio type. Audio output changes [...]

SETTING THE LANGUAGE OPTIONS 33 En Selecting a Subtitle Language (Multi-Language Subtitles) – DVD Y ou can select a desired subtitle language with DVDs that have subtitle data in multiple languages recorded on them. Press SUBTITLE repeatedly during playback. Pressing SUBTITLE once displays the currently selected subtitle language. Subsequent pres[...]

34 En Setting Auto Language to control subtitle and audio language based on program content When the Auto Language function is used, foreign movies are shown with the original audio soundtrack and subtitles in the language selected in the [Subtitle Language] menu option. Domestic films are shown with the original audio soundtrack and no subtitles. [...]

SETTING THE LANGUAGE OPTIONS 35 En Selecting a DVD menu language preference Expert In addition to containing different audio languages, DVD may also contain menu screens in different languages as well. Setting a DVD language preference, sets the selected language as a default when DVDs with menu information in that language are encountered. Selecti[...]

36 En Advanced Functions This player is compatible with DVD, V ideo CD, and CD disc formats. Users already familiar with Video CD or CD will already be familiar with some of the functions the player is capable of performing. With DVD, an even greater number of possibilities and functions are available. Note DVDs differ in content and do not all con[...]

ADV ANCED FUNCTIONS 37 En Audio1 Audio2 General Language Video Parental Loc k – Level 8 Setup Navigator Background Color Move Exit Blue Black SETUP Setup Menu Mode – Expert Changing the password Change your password whenever you feel it is necessary . However , if you forget your existing password, you cannot enter this screen to change it. 1 S[...]

38 En Still Frame/Slow Play/Frame Advance Playback – DVD/Video CD The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced frame by frame. Viewing a still frame Press PAUSE 8 . When viewing a DVD, if the paused picture shakes, select the [Field] setting in the Setup screen Video menu [Still[...]

ADV ANCED FUNCTIONS 39 En Searching for a T itle, Chapter , T rack, or Location on a Disc – DVD/Video CD/CD This player offers different ways of accessing the information on a DVD, Video CD, or CD. Using SEARCH MODE , you can search for titles or chapters on a DVD, tracks on a Video CD or CD, and even select the point in time to start playback. 1[...]

40 En Repeat play of a chapter/track Press REPEAT once during playback of the chapter or track you want to repeat. Repeat play of a title Press REPEAT twice during playback of the title you want to repeat. • With DVDs, the title continues playing until the end, and then playback starts once more from the beginning of that title. • With CDs and [...]

ADV ANCED FUNCTIONS 41 En Random playback of chapters within one title – DVD Press RANDOM once, then press ENTER or PLAY 3 . “ Random Chapter ” appears on the screen, and chapters within the title will be played back in random order. Random playback of titles Press RANDOM twice, then press ENTER or PLAY 3 . “ Random Title ” appears on the[...]

42 En 1 Press PROGRAM . The Program screen appears. 2 Use the cursor buttons ( 2 / 3 ) to select either Chapter or Title program. 3 Once the program type is selected. Use the cursor button ( ∞ ) to enter the program window. When [Program Chapter] is selected, you must also select what title the chapters to be programmed are in. Use the cursor but[...]

ADV ANCED FUNCTIONS 43 En Program T rack Current: T rack T otal Time 0.00 1(/10) PROGRAM Exit ENTER Play Move Additional programming options – DVD/Video CD/CD After you have made a program, it is then possible to confirm, add, or clear the contents of the program. To confirm the contents of a program: On a CD or Video CD track program, press PROG[...]

44 En To make a program of your favorite parts of a disc as it plays – DVD/Video CD/CD With this player , it is possible to make a program as you watch a DVD or Video CD or while listening to a CD. Press and hold PROGRAM for at least 2 seconds at any point during playback of a title, chapter, or track you want to program, and it will be made into[...]

ADV ANCED FUNCTIONS 45 En Continuing Playback from a Specified Location (Last Memory) – DVD/Video CD The Last Memory function is convenient when you want to continue viewing a disc from the point where you were watching before. Unlike the resume function, the Last Memory function is effective even if the DVD is removed from the player (Last Memor[...]

46 En When a disc that has memorized settings is loaded “ Condition Memory ” will appear on the screen, and the previously memorized settings will be selected. Erasing the recorded contents Load a disc that has memorized settings, and press CLEAR while “ Condition Memory ” is being displayed. The disc ’ s recorded data will be erased. Not[...]

ADV ANCED FUNCTIONS 47 En The display changes for each type of disc as follows each time the button is pressed. DVD TITLE information: Top Row: title and chapter number, elapsed time of current title Bottom Row: remaining time in title, total time of title CHAPTER information: Top Row: title and chapter number, elapsed time of current title Bottom [...]

48 En Press DISPLA Y during while a disc is stopped to display DVD title and chapter information or Video CD and CD track information. Press DISPLA Y again to turn the display off. Information about the titles and chapters or tracks on a disc is displayed. When the information exceeds the space on the screen, use the cursor buttons ( 2 / 3 ) to mov[...]

49 En Additional Information Disc Care How to hold discs When loading or removing discs, try not to touch their playing surfaces. Cleaning Fingerprints or other dirt on the disc may affect sound and picture quality . T o clean your discs, use a soft clean cloth to wipe them. If necessary , moisten a soft cloth with diluted neutral detergent to remo[...]

50 En For Proper and Long Use of This Unit Do not move the unit during playback During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback. Doing so may damage the disc. When moving the unit When changing places of installation or packing the unit for moving, be sure to remove the disc and return the disc table to[...]

ADDITIONAL INFORMA TION 51 En Language Code List Language codes are used when setting the audio and subtitle language preferences ( page 3 4 ). Japanese (ja) English (en) French (fr) German (de) Italian (it) Spanish (es) Chinese (zh) Dutch (nl) Portuguese (pt) Swedish (sv) Russian (ru) Korean (ko) Greek (el) Afar (aa) Abkhazian (ab) Afrikaans (af) [...]

52 En T roubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below . Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified even after exe[...]

ADDITIONAL INFORMA TION 53 En Audio is not output or is distorted. The Setup screen Audio 1 menu [96 kHz PCM Out] setting is set to [96 kHz] . Digital output is prohibited on some discs. Be sure to make analog audio connections as well as digital connections ( page 15 ). The disc is dirty. Refer to ‘ Disc Care ’ ( page 49 ). The connection [...]

54 En Te r m s Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The latter allows you to enjoy a picture with a wider perspective. Chapter number Chapter numbers are the numbers assigned to sections of a title on the disc, simila[...]

ADDITIONAL INFORMA TION 55 En Regional restriction codes (region number) Regional restriction codes are built in to DVD players and DVD discs for each sales region. If the regional code of the DVD player does not match one of the regional codes of the DVD disc, playback is not possible. The region number can be found on the rear panel of the DVD pl[...]

Printed in China <VRB1263-A> <TWKZF/00J00000> Published by Pioneer Corporation. Copyright © 2000 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan K002AEn PIONEER ELECTRONICS [USA] INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. PIONEER ELECTRONICS OF CANAD[...]