Rockford Fosgate 400x4 manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 44 pages
- 0.26 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Stereo Amplifier
Rockford Fosgate bd500.1
28 pages 0.63 mb -
Stereo Amplifier
Rockford Fosgate Punch 45
52 pages 1.92 mb -
Stereo Amplifier
Rockford Fosgate 250, 360, 400, 500, 600, 800, 1000
56 pages 2.06 mb -
Stereo Amplifier
Rockford Fosgate 100X2
31 pages 0.13 mb -
Stereo Amplifier
Rockford Fosgate 400S
72 pages 3.64 mb -
Stereo Amplifier
Rockford Fosgate P450.2
64 pages 2.76 mb -
Stereo Amplifier
Rockford Fosgate 250M
12 pages 0.35 mb -
Stereo Amplifier
Rockford Fosgate P650.2
64 pages 2.76 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Rockford Fosgate 400x4. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Rockford Fosgate 400x4 ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Rockford Fosgate 400x4 décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Rockford Fosgate 400x4 devrait contenir:
- informations sur les caractéristiques techniques du dispositif Rockford Fosgate 400x4
- nom du fabricant et année de fabrication Rockford Fosgate 400x4
- instructions d'utilisation, de réglage et d’entretien de l'équipement Rockford Fosgate 400x4
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Rockford Fosgate 400x4 ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Rockford Fosgate 400x4 et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Rockford Fosgate en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Rockford Fosgate 400x4, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Rockford Fosgate 400x4, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Rockford Fosgate 400x4. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
®® I NST ALLA TION & O PERA TION M ANUAL 4 ® trans • ana 4- C HANNEL A MPLIFIER[...]
-
Page 2
[...]
-
Page 3
Dear Customer, Congratulations on your purchase of the world's finest brand of car audio amplifiers. At Rockford Fosgate we are committed to musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of prod[...]
-
Page 4
T ABLE OF C ONTENTS Introduction ...................................................................................... 1 Punch 4-Channel Amplifier Accessory Pack ...................................... 1 Rockford Fosgate Accessories ............................................................ 2 Technical Design Features ............................[...]
-
Page 5
I NTRODUCTION The Punch 400x 4 (pronounced “ x4 ” not “ by 4 ” ) is a 4-channel amplifier which can deliver 400 watts RMS. This amplifier utilizes a 2/4-channel input switch to eliminate the need for signal splitters. Four internal XCard crossovers allow the ampli- fier to be configured for use with many popular system designs without the a[...]
-
Page 6
R OCKFORD F OSGA TE A CCESSORIES The following accessories were designed to enhance the perfor- mance of the Punch 400x 4 amplifiers. Energy Storage Capacitor The Punch capacitors are used to provide extra current needed by amplifiers to reproduce musical transients. The Punch Caps also have the natural ability to filter AC ripple caused by the alt[...]
-
Page 7
T ECHNICAL D ESIGN F EA TURES – 3 – ◆ TOP AZ (T racking Operation Pre-Amplifier Zone) The TOPAZ ( T racking O peration P re- A mplifier Z one) circuitry solves ground loop noise problems common to automotive amplifier design. This innovative new development allows vastly improved isolation of the input signal grounds from the power supply gro[...]
-
Page 8
◆ DSM (Discrete Surface Mount) Technology The DSM (Discrete Surface Mount) manufacturing process com- bines the advantages of both discrete components and integrated circuitry. Rockford Fosgate is the only American amplifier manu- facturer to have invested millions into this process. DSM compo- nents differ from conventional discrete components i[...]
-
Page 9
◆ RTP (Real Time Protection) NOMAD (NOn-Multiplying Advanced Decision) The Punch and Power amplifiers use an analog computer process to maximize safe output power under all operating conditions. Rock- ford Fosgate pioneered and developed RTP (Real Time Protection), a crucial element in the performance edge of our amplifiers. The innovative NOMAD [...]
-
Page 10
◆ Pass-Thru Output The Pass-Thru output provides a convenient source for daisy- chaining an additional amplifier without the need for extra RCA cables or “ Y ” adapters. The Pass-Thru signal is derived from summing the Front and Rear Left inputs to create a Left output, and summing the Front and Rear Right inputs to create a Right output. Whe[...]
-
Page 11
D ESIGN F EA TURES 1. Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch amplifier dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% improvement of cooling over conventional extrusion heatsink designs. 2. End Caps – Interchangeable end caps conceal the wiring and input ca[...]
-
Page 12
7. Signal Input Switch – This switch allows selection of 2-channel or 4-channel input. 8. RCA Pass-Thru Jacks – The Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location. One of the internal XCards can be designate[...]
-
Page 13
I NST ALLA TION C ONSIDERA TIONS This section focuses on some of the vehicle considerations for installing your new Punch amplifier. Checking your battery and present sound system, as well as pre-planning your system layout and best wiring routes will save installation time. When deciding how to lay out your new system, be sure that each component [...]
-
Page 14
M OUNTING L OCA TION The mounting location and position of your amplifier will have a great effect on its ability to dissipate the heat generated during normal operation. The design of our cast aluminum heatsink serves to easily dissipate the heat generated over a wide range of operating condi- tions. However, to maximize the performance of your am[...]
-
Page 15
Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system. Stock electrical systems which are in good condition should be able to handle the extra load[...]
-
Page 16
3. Mount the fuseholder within 18" of the battery using two (2) #8 screws. Disassemble the fuseholder. You should have 2 black plastic end caps, 2 gold-plated fuse clips, a plastic spacer and the fuseholder body. Trim the amplifier power cable to reach the fuseholder and strip the wire 3/8". Slide one of the end caps over the wire (narrow[...]
-
Page 17
8. Connect the speakers. Strip the speaker wires 5/8" and insert into the appropriate terminal on the amplifier. Insert the bared wire into the speaker terminal and tighten the set screw to secure into place. Be sure to maintain proper speaker polarity. DO NOT chassis ground any of the speaker leads as unstable operation may result. 9. Perform[...]
-
Page 18
U SING THE XC ARD The crossover functions are controlled through the use of an XCard and can be set for high-pass, low-pass or full range operation. Each crossover card has two faces: one face operates Full Range , the other has arrows to indicate the edge for selecting HP (high-pass) or LP (low-pass) operation. Orient the card with the desired ope[...]
-
Page 19
XC ARD C ONFIGURA TIONS REM B+ GND LED Rear Front XCard Rear 1 XCard Front XCard Pass-Thru LP 20Hz-100Hz 12dB/octave LP Full Range XCard Rear 2 –L+ +L– + R – – R + –L+ REM B+ GND LED + L – +R– Rear Front Front XCard XCard Rear 1 XCard Rear 2 XCard Pass-Thru HP 100Hz-20kHz 12dB/octave HP –R+ Configure a 12dB/octave filter for the Fro[...]
-
Page 20
– 16 – Configure a 24dB/octave filter for the Rear channels. • Rear XCards 1 & 2 set identically to High-Pass or Low-Pass REM B+ GND LED Rear Front XCard Rear 1 XCard Front XCard Pass-Thru LP 20Hz-100Hz 24dB/octave LP LP XCard Rear 2 –L+ +L– + R – – R + Configure a 12dB/octave Bandpass filter for the Rear channels. –L+ REM B+ GN[...]
-
Page 21
LP XCard Pass-Thru Front Gain Rear Gain 0/180 4/2 20Hz-100Hz 12dB/octave LP XCard Front XCard Rear1 XCard Rear2 – 17 – Configure a 12dB/octave filter for the Pass-Thru • Pass-Thru XCard set to High-Pass or Low-Pass[...]
-
Page 22
U SING THE S IGNAL I NPUT S WITCH 2-Channel Input – 18 – • RCA s connected to Front inputs • Signal Input Switch set to 2-channel input • Pass-Thru is a non-fading summed output • This configuration eliminates the need for signal splitters Front Gain Rear Gain 0 ° /180 ° 4/2 Input INPUT L - Summed Output R - Summed Output 1 2 REM B+ G[...]
-
Page 23
– 19 – • RCA s connected to Front & Rear inputs • Signal Input Switch set to 4-channel input • Pass-Thru is a non-fading summed output • This configuration allows for Front & Rear fading Front Gain Rear Gain 0 ° /180 ° 4/2 Input INPUT L - Summed Output R - Summed Output 1 2 REM B+ GND LED Rear Front Pass-Thru – L+ +L – +R [...]
-
Page 24
B ASIC C ONNECTIONS Power Connections – 20 – Connect to remote turn-on lead of source unit Connect to B+ of battery with a 50 amp fuse Connect to chassis ground of vehicle* Less than 18" GND B+ LED +L – +R –– L+ – R+ *Keep grounds as short as possible.[...]
-
Page 25
– 21 – 2-Channel Stereo Operation Front Gain Rear Gain 0/180 4/2 INPUT REM B+ GND LED Rear Front Pass-Thru Front Rear 4 ohm min. left 4 ohm min. right + – + – – L+ +L – +R –– R+ • RCAs are connected to front inputs • Signal Input Switch set to 2-channel input • Phase Switch set to 0 ° • Gain for front and rear left channels[...]
-
Page 26
2-Channel Mono Operation – 22 – Front Gain Rear Gain 0/180 4/2 INPUT REM B+ GND LED Rear Front Pass-Thru Front Rear 4 ohm min. 4 ohm min. + – + – – L+ +L – +R –– R+ • RCAs are connected to front inputs • Signal Input Switch set to 2-channel input • Phase Switch set to 0 ° • Gain for front left and right channels set equally[...]
-
Page 27
3-Channel Operation – 23 – Front Gain Rear Gain 0/180 4/2 – L+ REM B+ GND LED +L – Rear Front Pass-Thru Front Rear 4 ohm min. 2 ohm min. + – + – 4-Ch. { 2-Ch. { INPUT + – 2 ohm min. +R –– R+ * Adjust the phase switch to 180 ° if XCard for front channel is set to HP and XCard for rear channel is set to LP (or vice versa). • RCAs[...]
-
Page 28
4-Channel Stereo Operation – 24 – 2 ohm min. + – + – 2 ohm min. Front Gain Rear Gain 0/180 4/2 – L+ REM B+ GND LED +L – Rear Front Pass-Thru Front Rear 2 ohm min. + – 4-Ch. { 2-Ch. { INPUT + – 2 ohm min. +R –– R+ • RCAs are connected to front or front and rear inputs • Signal Input Switch is set to 2-channel or 4-channel inp[...]
-
Page 29
4-Channel Stereo/Single Mono Operation – 25 – 2 ohm min. + – + – 2 ohm min. Front Gain Rear Gain 0/180 4/2 – L+ REM B+ GND LED +L – Rear Front Pass-Thru Front Rear 2 ohm min. + – 4-Ch. { 2-Ch. { INPUT + – 2 ohm min. +R –– R+ 4 ohm min. + – • RCAs are connected to front or front and rear inputs • Signal Input Switch is set [...]
-
Page 30
4-Channel Stereo/Dual Mono Operation – 26 – 2 ohm min. + – + – 2 ohm min. Front Gain Rear Gain 0/180 4/2 – L+ REM B+ GND LED +L – Rear Front Pass-Thru Front Rear 2 ohm min. + – 4-Ch. { 2-Ch. { INPUT + – 2 ohm min. +R –– R+ 4 ohm min. + – + – 4 ohm min. • RCAs are connected to front or front and rear inputs • Signal Input[...]
-
Page 31
S YSTEM D IAGRAMS 200 Watt 3-Way System – 27 – 4 ® trans • ana ® RF A-812 Front Rear + – + – 24dB/octave LP 20Hz - 100Hz RF A-414 12dB/octave HP 100Hz - 20kHz 2X-4 2X-4 RF A-414 + – + – + – + – + – + –[...]
-
Page 32
400 Watt 4-Way System – 28 – 4 ® trans • ana ® RF A-812 Front Rear + – RF A-414 12dB/octave HP 275Hz - 20kHz 2X-4 2X-4 RF A-414 + – + – + – + – + – + – 24dB/octave LP 20Hz - 100Hz + – DSM ® 2 + – + – 12dB/octave LP 12dB/octave HP 100Hz - 275Hz Pass-Thru[...]
-
Page 33
600 Watt 4-Way System – 29 – RF A-812 Front Rear + – 24dB/octave LP 20Hz - 100Hz + – DSM ® 2 + – + – 12dB/octave LP 12dB/octave HP 100Hz - 275Hz 4 ® trans • ana ® RF A-414 12dB/octave HP 275Hz - 20kHz 2X-4 2X-4 RF A-414 + – + – + – + – + – + – 4 ® trans • ana ® RF A-414 12dB/octave HP 275Hz - 20kHz 2X-4 2X-4 RF A-41[...]
-
Page 34
800 Watt 4-Way System – 30 – RF A-812 Front Rear + – 24dB/octave LP 20Hz - 100Hz + – DSM ® 2 + – + – 12dB/octave LP 12dB/octave HP 100Hz - 275Hz 4 ® trans • ana ® RF A-414 12dB/octave HP 275Hz - 20kHz 2X-4 2X-4 RF A-414 + – + – + – + – + – + – 4 ® trans • ana ® RF A-414 12dB/octave HP 275Hz - 20kHz 2X-4 2X-4 RF A-41[...]
-
Page 35
T ROUBLESHOOTING Amplifier does not turn on (Power LED is off) Symptom Diagnosis Remedy Voltage applied to the REM terminal of the amplifier is not between 10.5 and 15.5 volts or there is no voltage present. Voltage to the B+ termi- nal of the amplifier is not between 10.5 and 15.5 volts or there is no voltage present. Amplifier is not prop- erly g[...]
-
Page 36
Speaker Output Low or Distorted Readjust input gains of amplifier. Check system with known working source and repair or replace original source as needed. Check XCard position and repair or replace as neces- sary. Check the alternator, bat- tery, fuse, and power and ground wiring. Repair as necessary. Symptom Diagnosis Remedy Input gain signal for [...]
-
Page 37
Noise is radiating into RCA signal cable. Bad component in the sig- nal chain. Noise is radiating into speaker cables. Multiple grounds in the audio system. Ground loop between source unit and antenna. Engine Noise Symptom Diagnosis Remedy Check connections, run the RCA cables on a different route away from sources of high voltage. Check connection[...]
-
Page 38
D YNAMIC P OWER M EASUREMENTS About the Dynamic Power Measurements The Audio Graph PowerCube is a test instrument used to measure the output of an amplifier in accordance with IHF-202 industry stan- dards. The IHF-202 standard is a dynamic power measurement and was developed as a means of measuring power in a manner that best represents the real wo[...]
-
Page 39
Information Cubed The data acquired in the testing procedure is then graphed in the form of a 3-dimensional cube. Hence the name PowerCube . The Phase Angle is expressed on the horizontal axis, the Output Voltage is presented on the vertical axis and the Impedance is displayed on the Z axis. Output Power, in watts, is listed on the left hand side f[...]
-
Page 40
400 X 4 S PECIFICA TIONS Continuous Power Rating (Competition Standard) – Measured at 13.8V RMS continuous power per channel , all channels 50 Watts driven into a 4 Ω load from 20-20,000Hz with less than 0.05% Total Harmonic Distortion (THD) RMS continuous power per channel , all channels 100 Watts driven into a 2 Ω load from 20-20000Hz, with[...]
-
Page 41
W ARRANTY I NFORMA TION Rockford Fosgate warrants all electronics to the original consumer/purchaser to be free from defects in materials or workmanship for a period of three (3) years. We will cover parts and labor provided the product was purchased from an Authorized Rockford Fosgate Dealer. This warranty does not apply to any product on which th[...]
-
Page 42
N OTES[...]
-
Page 43
N OTES[...]
-
Page 44
Rockford Fosgate Rockford Corporation 546 South Rockford Drive Tempe, Arizona 85281 U.S.A. In U.S.A., (602) 967-3565 In Europe, Fax (49) 4207-801250 In Japan, Fax (81) 559-79-1265 6/95 MAN-0993-A[...]