Samsung DIGIMAX S700 manuel d'utilisation

[...]

ŝ 1 Ş Instructions Getting to know your camera ƈ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in A[...]

Danger Wa r n ing ŝ 2 Ş Caution WARNING indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. ƈ Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subject’s eyes may cause eyesight damage. ƈ For safety reasons keep this product and access[...]

ŝ 3 Ş Contents READY ƃ System chart 4 ƃ Identification of features 5 ƈ Front & Top 5 ƈ Back & Bottom 6 ƈ Bottom / 5-function button 7 ƈ Cradle(Optional) 7 ƈ Self-timer lamp 8 ƈ Camera Status Lamp 8 ƈ Mode icon 8 ƃ Connecting to a Power Source 8 ƈ Using the batteries 8 ƃ Inserting the memory card 9 ƃ Instructions on how to use[...]

ŝ 4 Ş System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Software CD (see p.65) Camera strap User manual, Product warranty Camera case Rechargeable battery (SNB-251[...]

ŝ 5 Ş Identification of features Flash Self-timer lamp / Auto focus lamp Strap eyelet Shutter button Mode dial Power button Speaker Microphone Lens / Lens cover Front & Top[...]

ŝ 6 Ş Identification of features Back & Bottom LCD monitor Tripod 5 function button E (Effects) button Play mode / Printer button Zoom T button (Digital zoom) Camera status lamp Zoom W button (Thumbnail) +/- button, Delete button USB / AV connection terminal Cradle connector[...]

ŝ 7 Ş Identification of features Bottom / 5-function button Cradle (Optional) ƈ You can recharge your rechargeable battery (SBP-2524), transfer a captured image to print, and download images with the cradle. (Refer to page 9, 49, 68) Camera connection terminal AC connection terminal USB port / AV connection terminal Battery chamber Battery chamb[...]

ŝ 8 Ş Connecting to a Power Source Identification of features ƈ Self-timer lamp Icon Status Description For the first 8 seconds, the lamp blinks at 1 second intervals. For the final 2 seconds, the lamp blinks quickly at 0.25- second intervals. For the 2 seconds, the lamp blinks quickly at 0.25-second intervals before taking a picture. A picture [...]

ŝ 9 Ş Connecting to a Power Source Important information about battery usage ƃ When the camera is not used, turn off the camera power. ƃ Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera. ƃ Low temperatures (below 0˚C) can affect the p[...]

ƃ Be sure to format the memory card (see p.55) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ƃ Turn off the camera power whenever the memory card is being inserted or removed. ƃ Repeated use of the memory card will eve[...]

ŝ 11 Ş Instructions on how to use the memory card [ SD (Secure Digital) memory card ] Write protect switch Label Card pins ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards. The SD memory card has a write protect switch that prevents image files from being deleted or form[...]

ŝ 12 Ş When Using the Camera for the First Time ƈ Charge the rechargeable battery fully before using the camera for the first time. ƈ When the camera is turned on for the first time, a menu will be displayed to set date / time, language and battery type in the LCD monitor. This menu will not be displayed after setting up. Set up the date / time[...]

ŝ 13 Ş LCD monitor indicator [ Image & Full Status ] ں ڻ ڽ ڼ ھ ڿ ۀ ہ ؅ ۇ ۅ ۆ ؇ ؆ ؉ ؈ ۄ ۂ ۃ ؋ ؊ ڹ ƈ The LCD monitor displays information about the shooting functions and selections. No. Description Icons Page 4 Continuous shot p.33 5F lash / Without Sound p.21~23 6 Self-timer p.23 7 Macro p.20~21 8 Metering p.33 9 Card i[...]

ŝ 14 Ş Starting the recording mode ƈ How to use the PROGRAM mode ( ) Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Select the PROGRAM mode by rotating the mode dial. 2. Press the menu button to configure advanced functio[...]

ŝ 15 Ş Starting the recording mode ƈ How to use the MOVIE CLIP mode ( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the MOVIE CLIP mode by rotating the mode dial. 2. The MOVIE CLIP mode icon and available recording time will display on the LCD monitor. 3. Point the camera towa[...]

ŝ 16 Ş Starting the recording mode [ Night mode ] [ Portrait mode ] [ Children mode ] ƈ Night / Portrait / Children mode Rotate the mode dial to select a desired mode. - Night mode : Use this for still images at night or in other dark conditions - Portrait mode : To take a picture of a person - Children mode : To take a still picture of moving c[...]

ŝ 17 Ş Starting the recording mode Things to W atch Out for When T aking Pictures ƈ How to use the VOICE RECORDING mode ( ) 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is[...]

ŝ 18 Ş Using the camera buttons to set the camera ZOOM W / T button ƈ The recording mode function can be set up by using the camera buttons. ƃ Used for turning the camera’s power on / off. ƃ If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 54 for [...]

ŝ 19 Ş ZOOM W / T button ƃ Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. ƃ The digital zoom cannot be used in movie clip shots. ƃ You may notice a decrease in image quality when using the digital zoom. ƃ To view a clearer digital zoom image, press the shutter button [...]

ŝ 20 Ş V oice recording( ) / V oice memo( ) / UP button Macro( ) / Down button ƈ While the menu is showing, press the UP button to move up the submenu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo ( ) button. You can add your voice-over to a stored still image. Refer to page 17 fo[...]

ŝ 21 Ş Macro( ) / Down button Flash ( ) / Left button ƃ Flash range (Unit : m) ƈ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ƈ When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button. ƃ Selecting the flash mode 1. Rotate the MODE DI[...]

ŝ 22 Ş Flash ( ) / Left button Menu tab Flash mode Description ƃ Flash mode indicator If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. The flash fires regardles[...]

ŝ 23 Ş Flash ( ) / Left button Self-timer ( ) / Right button ƃ If you operate the Self-timer and Play mode button during the self-timer operation, the self-timer function is cancelled. ƃ Use a tripod to prevent the camera from shaking. ƃ In Movie Clip mode, only the 10SEC self-timer will work. ƃ Available flash mode, by recording mode (O : Se[...]

ŝ 24 Ş MENU / OK button E (Effect) button ƈ It is possible to add special effects to your images by using this button. ƈ Still image mode : You can select the colour, outfocus, composite and frame menus. ƈ Movie clip mode : You can select the colour menu. ƈ Available Effects, by recording mode (O : Selectable X : Not selectable) ſ This butto[...]

ŝ 25 Ş Special Effect : Colour Special Effect : Preset focus frames 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. : No effect is added to the image : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). : Captured image[...]

ŝ 26 Ş Special Effect : Preset focus frames Special Effect : Composite shooting ƈ You can combine 2 ~ 4 different shots in a still image. 1. Press the E button in any recording mode (except for MOVIE CLIP and AUTO mode). 2. Select the ( ) menu by pressing the Left / Right button. 3. Select a desired sub menu by pressing the Up / Down button and [...]

ŝ 27 Ş Special Effect : Composite shooting ƃ Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the + / - button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press [...]

ŝ 28 Ş Special Effect : Photo Frame + / - button ƈ You can use the + / - button to adjust the values for the RGB, ISO, white balance and exposure compensation. Main menu Sub menu Available camera mode RGB R (Red), G (Green), B (Blue) ISO AUTO, 80, 100, 200, 400, 800, 1000 Exposure compensation -2.0 ~ 0.0 ~ +2.0 (0.5EV steps) WHITE BALANCE AUTO, [...]

ŝ 29 Ş + / - button ƃ Selecting an ISO Sensitivity 1. Press the + / - button, and then use the UP and DOWN buttons to select the ISO icon( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value. - AUTO : The camera's sensitivity is automatically changed by variables such as li[...]

ŝ 30 Ş + / - button ƃ Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. ƈ Exposure compensation : This camera automatically adjusts the exposure according[...]

ŝ 31 Ş ƈ You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. ſ The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is [...]

ŝ 32 Ş Size Quality / Frame rate [ MOVIE CLIP mode ] FRAME RATE 30FPS 15FPS ƈ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Icon Sub menu Super Fine Fine Normal 30FPS 15FPS File Format jpeg jpeg jpeg avi avi STILL IMAGE mode Mode MOVI[...]

ŝ 33 Ş ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. [Spot] : Only[...]

ŝ 34 Ş Sharpness OSD (On Screen Display) information ƈ Idle mode : If you select the [LCD Save] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. - To use the camera again, press any of the camera buttons except the power bu[...]

ŝ 35 Ş Starting play mode ƃ Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip and press the Play & Pause button ( ) to play back. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button again [...]

ŝ 36 Ş Starting play mode LCD monitor Indicator ƃ Playing back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice file and press the Play & Pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button[...]

ŝ 37 Ş [ Thumbnail display mode ] Using the camera buttons to set the camera Thumbnail( ) / Enlargement ( ) button ƈ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. ƃ Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image[...]

ŝ 38 Ş Thumbnail ( ) / Enlargement ( ) button ƈ When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up. ƈ When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice to a stored still image. ƃ Adding a Voice Memo to a Still Image 1. Pres[...]

ŝ 39 Ş ƈ In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing. In Stop mode : Plays a still image with a voice memo, a voice fi[...]

ŝ 40 Ş Delete ( ) button Printer button ƈ If you select [Computer] sub menu in the [USB] setup menu, [Connecting Computer] message will display when you connect the camera to your printer and the connection will not be established. In this case, press the Printer button. [Connecting Printer] message will display and the Easy printing mode will b[...]

ŝ 41 Ş ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Menu tab Main menu Sub menu Secondary menu P[...]

ŝ 42 Ş Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page One Pic - All Pics - No - Yes - Auto Postcard Card 4X6 L 2L Letter A4 A3 Auto Full 1 2 4 8 9 16 Index IMAGES AUTO SET CUSTOM SET Size p.50 p.50 p.51 ƈ This menu is available while the camera is connected to a PictBridge supporting print[...]

ŝ 43 Ş ƃ Start the slide show : The slide show can start only in the [Show] menu. 1. Use the Up / Down buttons to select the [Show] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [Play] : The slide show is closed after one cycle. [Repeat Play] : The slide show is repeated until cancelled. 3. To sa[...]

ŝ 44 Ş Starting the slide show Protecting images ƈ This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ƃ Protecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [PROTECT] menu tab. [...]

ŝ 45 Ş ƈ Change the resolution (size) of pictures taken. Select the [User Image] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN[...]

ŝ 46 Ş Rotating an image DPOF ƈ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing [...]

ŝ 47 Ş DPOF : Standard DPOF : Index ƈ This function allows you to embed printing quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3. Select the [Standard] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select a d[...]

ŝ 48 Ş DPOF : Print size Copy T o Card ƈ This enables you to copy image files, movie clips and voice recording files to the memory card. ƃ Copying to the Memory Card 1. Press the play mode button and press the menu button. 2. Select the [COPY TO CARD] menu tab by pressing the LEFT / RIGHT button. 3. Select a desired sub menu by pressing the UP [...]

ŝ 49 Ş On Screen Display information PictBridge ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ƃ Setting up the camera for connection with the printer 1. In any mode with the exception of Voice Recordi[...]

ŝ 50 Ş PictBridge : Picture Selection PictBridge : Print Setting Exit:Shutter Set:OK ƃ Setting the Number of Copies to Print - Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below. PREV  NEXT  0  Exit:Shutter Set:OK  0  AUTO SET No Yes Exit:MENU Move:   ƈ AUT[...]

ŝ 51 Ş PictBridge : Print Setting PictBridge : Printing ƈ Printing Pictures 1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. [Standard] : Print the pictures stored in the memory card in set numbers. One picture is printed on one pi[...]

ŝ 52 Ş PictBridge : Printing Setup menu PictBridge : Reset 1. Use the LEFT and RIGHT buttons to select the [RESET] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. If [No] is selected : Settings will not be reset. If [Yes] is selected : All print and image settings will be reset. ſ Defa[...]

ŝ 53 Ş Setup menu ſ Menus are subject to change without prior notice. Menu tab Main menu Sub menu Secondary menu Page Computer - Printer - Off - On - Dark - Normal - Bright - NTSC - PAL - Quick View Off / 0.5, 1, 3 sec - p.57 No - Yes - Alkaline - Ni-MH - AF Lamp LCD Video Out Reset Battery type p.56 p.56 p.57 p.58 p.58 USB p.56 ƃ Assigning Fil[...]

ŝ 54 Ş Setup menu [ Auto power off ] ƈ This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. ƃ Sub menus [Off] : The power off function will not operate. [1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of time specified. - After replacing the batte[...]

ŝ 55 Ş [ Formatting a memory ] ƈ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. ƃ Sub menus [No] : The memory will not be formatted. Press the menu button three times and the menu[...]

ŝ 56 Ş Setup menu [ Sound ] ƈ If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. ƃ [Sound] sub menu : Off / Low / Medium / High [ Connecting an External Device (USB) ] ƈ You can select an external device to which you want to connect the[...]

ŝ 57 Ş [ Selecting Video out type ] ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƈ Connecting to an external monitor ƃ Using the USB cable with Cradle (Optional) : Connect the ca[...]

ŝ 58 Ş Setup menu Setting up the Mycam menu [ Initialisation ] ƈ All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed. ƃ Sub menus [No] : Settings will not be restored to their defaults. [Yes] : All settings will be restored to their defaults. [...]

ŝ 59 Ş Start up sound Shutter sound Important notes ƈ You can select the sound that is activated whenever the camera is turned on. ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3] - If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on. ƈ You can select the shutter sound.[...]

ŝ 60 Ş Important notes ƈ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur in the memo[...]

ŝ 61 Ş W arning indicator Before contacting a service centre ƈ There are several warnings that may appear on the LCD display Card Error! Ү Memory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card. (p.55) Card Locked! Ү The memory card is locked ƍ S[...]

ŝ 62 Ş Before contacting a service centre Camera does not take images when pressing the Shutter button Ү There is insufficient memory capacity ƍ Delete unnecessary image files Ү The memory card has not been formatted ƍ Format the memory card (p.55) Ү The memory card is exhausted ƍ Insert a new memory card Ү The memory card is locked ƍ Ref[...]

ŝ 63 Ş Before contacting a service centre Specifications No image on external monitor Ү The external monitor has not been connected properly with the camera ƍ Check the connection cables Ү There are incorrect files in the memory card ƍ Insert a memory card that has correct files When using the PC’s explorer, the [Removable Disk] file does n[...]

ŝ 64 Ş Specifications ƈ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom ƈ Voice Recording : Voice Recording (max.1 hour), Voice Memo in Still Image (max. 10 sec.) ƈ Date Imprinting : Date, Date&Time, Off (user selectable) ƈ Shooting - Still Image: ŋ Modes : Auto, Program, Scene ſ Scene : Night, Por[...]

ŝ 65 Ş Software Notes About the software System Requirements Please ensure that you read the instruction manual carefully before use. Ү The attached software is a camera driver and image editing software tool for Windows. Ү Under no circumstances should all or part of either the software or the user manual be reproduced. Ү Copyrights for softw[...]

ŝ 66 Ş Setting up the application software ƈ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ƈ You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http:[...]

ŝ 67 Ş Setting up the application software Starting PC mode 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera. ſ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was setup succ[...]

ŝ 68 Ş Starting PC mode ƈ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk [...]

ŝ 69 Ş Removing the removable disk Starting PC mode ƃ We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. ƃ When you upload a file that is not taken by this camera to the Removable Disk, the [File Error!] message will be displayed on the[...]

ŝ 70 Ş Setting up the USB Driver for MAC Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version durin[...]

ŝ 71 Ş Removing the USB Driver for Windows 98SE Digimax Master ƈ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98. ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master ƍ Digimax Master]. 3. Click [Next >] button. [...]

ŝ 72 Ş Digimax Master ƃ Image viewer : You can view the stored images. ڹ ڽ ھ ڿ ں ڻ ڼ - Image viewer functions are listed below. ڹ Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ں Image selection window : You can select the desired images in this window. ڻ Media type selection menu [...]

ƃ Image edit : You can edit the still image. ڹ ں ڻ ڼ - Image edit functions are listed below. ڹ Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or insert effects on the image.[...]

ŝ 74 Ş FA Q Case 6 When I open the Device Manager (by clicking Start ƍ (Settings) ƍ Control Panel ƍ (Performance and Maintenance) ƍ System ƍ (Hardware) ƍ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. ƍ Right-click on the ent[...]

ƃ When the DirectX 9.0 or later is not installed ƍ Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive: USB DriverDirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.micros[...]

ŝ 76 Ş MEMO FCC notice ƈ ƈ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequ[...]

SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : ( 82 ) 31-740-8086, 8088, 8090, 8092, 8099 FAX : ( 82 ) 31-740-8398 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : ( 1 ) 201-9[...]