SMC Networks SMCWIPCFN-G2 manuel d'utilisation

EZ Connect N Draft 11n Wireless USB2.0 Adapter EZ Connect V ision ™ Wireless IP Camera SMCWIPCFN-G2[...]

Copyright The information provided by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or ot her rights of third parties which may result from its us e. No license is granted by implication or otherwise under any patent or patent rights o[...]

-1- Warranty and Product Registration To register SMC products and to review the detailed warranty statement, please refer to the Support Section of the SMC Website at http://www.smc.com SMC Networks, Inc. 20 Mason Irvine, CA 92618[...]

-2- Compliances Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Clas s B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentia l installat ion. This equipment genera[...]

-3- this device must accept any interference receive d, including interference that ma y cause undes ired operation. FCC Caution: To ass ure continued compliance, ( example - use only shielded interfac e cables when connecting to computer or peripheral devic es) any changes or modifications not expressl y approved by the party responsible for compl[...]

-4- Industry Canada S tatement Operation is subject to t he following t wo conditions: 1. This device may not cause interference and 2. This device must accept any interferen ce, including interference that m ay cause undesired oper ation of the device To prevent radio interference to t he licensed service, this device is intended to be oper ated i[...]

Group CTSG Fructuos Gelabert 6-8 2o2a 08970 Sant Joan Despi, Barcolona,Spain This product indicates comp liance with the Essential Requirements of the R&TTE Direct ive of the European Union (1999/5/EC). This equi pment meets the following conformance standar ds. EN 55022:2006 Class B EN55024:1998 +A1:2001 +A2:2003 EN 61000-3-2: 2006 IEC61000-4-[...]

-6- Countries of Operation & Conditions of Use in the European Community This device is intended t o be operated in a ll countries of the European Community. Requirements for indoor vs. outdoor operation, license requirement s and allowed chan nels of operati on apply in some countries as described b elow. Note: The us er must use the configura[...]

-7- ． This device may b e operated in doors or outdoors in all countries of European Community using the 2 .4GHz band: Channel 1-13. Declaration of Conformity in Languages of the European Community [Czech] Spole č nost SMC Networks tímto prohlašuje, že toto rádiové za ř ízení LAN je ve shod ě se základními požadavky a dalšími p ř [...]

-8- entsprechenden Produktkategorie. [Estonian] Käesolevaga kinnitab SMC Networks, et see Radio LAN seade vastab direktiivi 1995/5/EÜ põhinõuetele ja teistele asjakohastele sätetele. Ametliku EÜ vastavusdeklaratsiooni leiate vastavast tootejaotisest aadressil http://www.smc.com . [English] Hereby, SMC Networks, declares that this Radio LAN de[...]

-9- προϊόντων , στην ιστοσελίδα http://www.smc.com . [French] Par la présente SMC Networks déclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. La déclaration de conformité officielle peut être trouvée sur notre site intern[...]

-1 0- http://www.smc.com . [Dutch] Hierbij verklaart SMC Networks dat het toestel Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Het officiële EC- gelijkvormigheidattest kan men vinden op de internetsite http://www.smc.com onder de betrokken productcategorie. [Maltese] B?[...]

-1 1- witrynie http://www.smc.com . [Portuguese] A SMC Networks declara que este dispositivo de LAN de Rádio está em conformidade com os requisitos essenciais e com outras provisões relevantes da Directiva 1999/5/CE. A Declaração de Conformidade CE oficial encontra-se na secção correspondente do produto na Web, http://www.smc.com . [Slovenia[...]

-1 2- [Swedish] Härmed intygar SMC Networks att denna Radio LAN-apparat uppfyller de väsentliga egenskapskrav och övriga relevanta bestämmelser i direktiv 1999/5/EG. Den officiella EG-försäkran om överensstämmelse finns under motsvarande produktavsnitt på http://www.smc.com . [Icelandic] Hér með lýsir SMC Networks því yfir að þessi [...]

-1 3- office use in all notified EC and EFTA member states. In accordance with article 6.4 of the R&TTE Directive 1999/5/EC the following EC/ EFTA member states have been notified: Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxembourg, Netherlands, Norway, Spain, Sweden, Switzerland, United Kingdom, Portugal, Greece, Ireland, I[...]

-1 4- extérieur. [Dutch] Dit toestel is een 2.4 Ghz draadloze Lan transceiver, bestemd voor gebruik binnen huis en kantoor in alle geïnformeerde lidstaten van de EC en de EFTA. In overeenstemming met artikel 6.4 van de R&T TE Directive 1999/5/EC zijn de volgende EC/EFTA lidstaten verwittigd: België, Denemarken, Duitsland, Finland, Frankrijk,[...]

-1 5- canales de operación permitidos se aplican en algunos países. Por favor contacte la autoridad reguladora local o SMC Networks para más detalles en relación con las restricciones actuales para uso exterior. [German] Dieses Wireless LAN Gerät arbeitet im 2.4 GHz Frequenzband und ist für den Einsatz im Innenbereich in den benachrichtigten [...]

-1 6- ESVO, kterým byl oznámen zám ě r uvést za ř ízení na trh. V souladu s č l. 6 odst. 4 sm ě rnice 1999/5/ES o rádiových za ř ízeních a telekomunika č ních koncových za ř ízeních byly uv ě dom ě ny tyto č lenské zem ě ES nebo ESVO: Belgie, Dánsko, Finsko, Francie, Irsko, Island, Itálie, Lucembursko, N ě mecko, Nizoze[...]

-1 7- tilladte betjeningskanaler. Kontakt d e lokale lovgivende myndigheder eller SMC Networks for at få oplysninger om aktuelle begrænsninger vedrørende udendørs betjening. [Estonian] See seade on 2.4 GHz juhtmeta LAN vastuvõtu-saatejaam, mis on mõeldud kodus ja kontoris kasutamiseks kõikides teavitatud EÜ ja Euroopa Vabakaubanduse Assotsi[...]

-1 8- σε όλα τα κράτη - μέλη της ΕΚ και της ΕΖΕΣ . Σύμφωνα με το άρθρο 6.4 της Οδηγίας για ραδιοεξοπλισμό και τηλεπικοινωνιακό τερματικό εξοπλισμό (R&TTE), 1999/5/ ΕΚ , έχουν ανακοινωθεί τα ακόλουθα κράτ[...]

-1 9- Paesi si applicano i requisiti per il funzionamento in esterni, quali requisiti di licenza e canali consentiti. Contattare l'Autorità normativa locale del proprio Paese o SMC Networks per informazioni dettagliate sulle limitazioni correnti per l'utilizzo in esterni. [Latvian] Š ī ier ī ce ir 2,4 GHz bezvadu LAN raiduztv ē r ē [...]

-2 0- patalpose namie ar biure visose notifikuotose EB ir ELPA šalyse nar ė se. Pagal RTTE Direktyvos 1999/5/EB 6.4 straipsn į , notifikuotos yra šios EB/ELPA šalys nar ė s: Austrija, Belgija, Danija, Suomija, Pranc ū zija, Vokietija, Italija, Liuksemburgas, Nyderlandai, Norvegija, Ispanija, Švedija, Šveicarija, Jungtin ė Karalyst ė , Po[...]

-2 1- u kanali permessi g ħ al t ħ addim japplikaw f’ ċ ertu pajji ż i. Jekk jog ħġ bok ikkuntattja lill- awtorità regolarorja lokali jew SMC Networks g ħ al dettalji dwar restrizzjonijiet attwali dwar l-u ż u fuq barra. [Hungarian] Ez az eszköz egy 2,4 GHz-es vezeték nélküli LAN adó-vev ő , amely beltéri és irodai használatra k[...]

-2 2- u ż ytku wewn ą trz pomieszcze ń , w domach i biurach we wszystkich krajach cz ł onkowskich UE i EFTA. Zgodnie z artyku ł em 6.4 dyrektywy 1999/5/EC dotycz ą cej norm dla urz ą dze ń radiowych i ko ń cowych urz ą dze ń teletransmisyjnych powiadomione zosta ł y nast ę puj ą ce kraje cz ł onkowskie: Austria, Belgia, Dania, Finlan[...]

-2 3- Itália, Luxemburgo, Holanda, Noruega, Espanha, Suécia, Suíça, Reino Unido, Portugal, Grécia, Irlanda, Islândia. Os requisitos para uma utilização no exterior, tais como de licença e de canais d e funcionamento permitidos aplicam-se a alguns países. Para obter informações sobre as restrições de utilização no exterior, contacte [...]

-2 4- [Slovak] Toto zariadenie je prijíma č a vysiela č pre bezdrôtové siete v pásme 2,4 GHz a je ur č ené na použitie v interiéroch domácností a kancelárií vo všetkých č lenských št átoch ES a EZVO, ktorým bol oznámený zámer uvies ť zariadenie na trh. V súlade s č l. 6 odst. 4 smernice 1999/5/ES o rádiovom zariadení a [...]

-2 5- Ranska, Saksa, Italia, Luxemburg, Alankomaat, Norja, Espanja, Ruotsi, Sveitsi, Iso-Britannia, Portugali, Kreikka, Irlanti ja Islanti. Joissakin maissa ulkokäyttöä koskevat erilliset vaatimukset, kuten erikseen anottava lupa ja sallittujen kanavien rajoittaminen. Ota yhteyttä paikalliseen käyttöä valvovaan viranomaiseen tai SMC Networks[...]

-2 6- heimili og skrifstofu í öllum tilkynntum aðildarríkjum EB og EFTA. Í samræmi við grein 6.4 í R&TTE tilskipuninni 1999/5/EB hefur eftirfarandi aðildarríkjum EB/EFTA verið tilkynnt þar um: Austurríki, Belgía, Danmörk, Finnland, Frakkland, Þýskaland, Ítalía, Lúxemborg, Holland, Noregur, Spánn, Svíþjóð, Sviss, Bretlan[...]

-2 7- for detaljert informasjon om gjeldende begrensninger for utendørs bruk.[...]

Safety Compliance Underwriters Laboratorie s Co mpliance Statement Important! Before making connecti ons, make sure you have the correct cord s et. Check it (read th e label on the cable ) against the followings: Operating Volta ge Cord Set Specificatio ns UL Listed/CSA certified Cor d Set Minimum 1 8AWG Type SVT or SJT three c onductor cord Maximu[...]

-2 9- DC, and output curre nt ratings of 1.5A o r equivalent. The external AC adapter must be complied with the require ments of LPS (Limited Po wer Sources) .[...]

-3 0- Content s Preface ................................................................... 32 Chapter 1 Introducti on To The Camera ...... 33 1.1 Checking the Package Contents ............................... 33 1.2 Getting to Know the Camera ..................................... 34 1.3 Features and Benefits ........................................[...]

-3 1- 4.11 Information ................................................................ 78 4.11 Information ................................................................ 80 Chapter 5 Appendix ........................................... 81 A.1 Specification .............................................................. 81 A.2 Glossary of Terms ..[...]

-3 2- P REF ACE Thank you for purchasing the SMCWIPCFN-G2 MPEG4/MJPEG Network Camera, a powe rful dual-co dec network camera with the 1 - way or 2-way audio providing high-quality image and on-the -spot audio. The Infrared LEDs and light sensor enable the came ra to capture images even in low-light enviro nment. The camera ca n be installed easily [...]

-3 3- C HAPTER 1 I NTRODUCTION T O T HE C AMERA 1.1 Checking the Package Contents Check the items contained in the packa ge ca refully. You should have the following: 5 One MPEG4/MJPEG Network Camera. 5 One DC switching adapter. 5 One Camera Stand. 5 One External Antenna 5 One Ethernet Cable (RJ-45 type). 5 One Installation CD-ROM. 5 One Quick Inst[...]

1.2 Getting to Know the Camera -3 4- Internal Microphone allows the camera to receive sound and voice. Infrared LEDs allows your camer a to capture clear image in a dark environment. Lens Assembly Light Sensor is used to trigger on and off the Infrared LEDs according the environmental lig ht level. USB Port allows you to connect an external USB dev[...]

NOTE After pressing the un-mount button for four seconds, the Power LED starts flashing. Whe n the Power LED resumes to the steady amber light, you can remove the USB device safely. -3 5- Screw thread is used to connect the camera stand. Audio-out Connector is used to connect an external active speaker. Reset Button will restart the camera when it [...]

-3 6- 1.3 Features and Benefits  MPEG4/MJPEG Dual-codec Suppor te d The camera provides excellent images supporting MPEG4/MJPEG dual-codecs, allowin g to adjust image size, quality, and bit rate according to the networking environment.  2-way Audio Capability The built-in microphone p ro v ides on -the-spot audio via the network allowing to m[...]

-3 7- By using a standard web brow se r or the bundled IP CAMERA MANAGER software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgrade d remotely whe n a new firmware is available. The users a re al so allowed to monitor the image and take snapshots via the[...]

-3 8- 1.4 System Requirement  Networking LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.  Accessing the Camera using a Web Bro w ser Platform: Microsoft® Windows® 2000/XP/Vista CPU: Intel Pentium III 800MHz or above RAM: 512MB Resolution: 800x600 or above User Interface: Microsoft® In ternet Explorer 6.0 or above Apple Safari 2 or abov[...]

C HAPTER 2 H ARDW ARE I NST ALLA TION 2.1 Installing the Camera Stand The camera comes with a camera stand, which u ses a swivel b all screw thread to lock to the came ra’s screw hole. When the came ra stand is attached, you can place the camera anywhe re by mountin g the camera through the three screw hol es located in the base of the camera sta[...]

2.2 Connecting the Camera to a LAN Use the provided Ethernet cable to co nnect the ca mera to your local area network (LAN). After connecting the AC power adapte r, the cam era is powered on automatically. Verify the power st atus by checking the Power LED on the front panel of the camera. Once connected, the Link LED starts flashin g gre en and th[...]

To connect the camera to a wire less network please attach the included external antenna to the came ra. When the camera is powered on, the camera will automatically search for a c cess points with “default” SSID. Connecting the External Antenna -4 1-[...]

2.3 Applications of the Camera The camera can be applied in multiple applications, including:  Monitor local and remote place s and objects via Internet or Intranet.  Capture still images and video cli ps remotely.  Upload images or send email messages with still images attached. The following diagram expl ains o ne of the typical applicat[...]

C HAPTER 3 A CCESSING THE C AMERA 3.1 Using IPFinder The camera comes with a convenient utility called IPFinder, which is included in the Installation CD-ROM and allows se arching the camera on the network easily. 1. Insert the Installation CD-ROM into the computer’s CD-ROM drive to initiate the Auto-Run program. 2. Click the IPFinder item to lau[...]

3.2 Access the Camera Whenever you want to access the camera: Whenever you want to access the camera: 1. Since the default configuration of the ca mera i s DHCP mode enabled, you are recommended to launch IPFinder to sea rch for the IP address that has been assigned t o the camera by the DHCP server, and then click Link to acce ss the camera via th[...]

After logging–in to the web configuration of the came ra, the main page will appear as below: Zoom In Buttons Ni g ht Mode Button Com p ression Buttons Live View/Setup Switch Camera Informati on Function Buttons Live View Ima g e The main page of the web configuration provide s a lot of useful information and functions, inclu ding:  Camera Inf[...]

-4 6-  Function Buttons – Use these button s to control the audio a nd video functions. z Manual Record allows you to record and save a video clip. z Snapshot allows you to captur e and save a still image. z Browse allows to define the de stination folder to store the video clips and still images. z Talk allows you to speak through the camera.[...]

-4 7- 3.3 Configuring the IP Address of the PC When the access to the camera fails, please first check the IP address of the computer. Before c onfiguring the camera the PC o r laptop must be configured to be in the same LAN segm ent as the network camera in o rde r for the two de vices to communicate. 1. On the computer, click Start Æ Control Pan[...]

C HAPTER 4 C ONFIGURING THE C AMERA 4.1 Using the Web Configuration It’s possible to access and manage the camera through the web browser or the provided software application IP CAMERA MANAGER. This Chapter describes how to configure the camera by using the web browser. To configure the camera, click Setup on the main pag e of web configuration. [...]

4.2 Using Smart Wizard The camera’s smart wizard lets you confi gure the camera easily an d quickly. The wizard will guide the user through the necessary settings with detailed instructions on ea ch step. To start the wizard , clic k Smart Wi zard in the left menu bar. Step 1. Camera Settings Enter the name for the camera and p lace. Enter the ad[...]

Step 3. Email Settings Enter the required information to be able to send email with image. Step 4. Wireless Networking -5 0-[...]

Step 5. Confirm Settings The last step shows a sum mary of the camera’s configuration. To confirm the settings, click Apply to finish the wizard and reboot the camera. Otherwi se, click Prev to go back to the previous step(s) and change the settings; or click Cancel to end the wizard and discard the changes.. 4.3 Basic Setup The Basic menu contai[...]

-5 2- Basic >> System The Basic setup menu contains th ree sub-me nus that provide the system setti n gs for the ca mera, such as the camera name, location, date & time, and user management. Basic >> System  Basic - Camera Name: Enter a descriptive nam e for the camera. - Location: Enter a descripti v e name for the location of t[...]

Basic >> User  Administrator To prevent unauthorized access to the camera’s web configuration, it’s strongly recommen ded to change the default administrator password. Type the administrator password twice to set and confirm the password.  General User - User Name: Enter the user’s name you want to add to use the camera. - Passwor[...]

 Guest - User Name: Enter the guest’s name you want to add to use the camera. - Password: Enter the password for the new gu est. - UserList: Display the existing gue sts of the cam era. To delete a guest, select the one you want to delete and cli ck Delete . NOTE The “General Use r” can access the cam era and control the function buttons o[...]

4.4 Network Settings The Network Settings menu contai ns three sub-menus that provide the network settings for the camera, such as the IP Settings, DDNS Setting, IP Filter, and Wireless network. -5 5-[...]

-5 6- Network >> Netw ork  IP Settings This item allows to select the IP address mode (Static or DHCP) and set-up the related configuratio n. - DHCP: Select this option when your network uses a DHCP server. When the camera starts up, it will be assign ed a valid IP address from the DHCP server automatically. - Static IP: Select this option[...]

-5 7- DDNS Setting Dynamic DNS (DDNS), allows to assign a fixed host- and domain name to a dynamic Internet IP address. Select the Enable option to enable this feature. Then, select the Provider from the drop-down list and enter the required inform ation in the Host Name , User Name , and Password fields. Please note that it’s necessary to sign u[...]

When finis hed, click Add to save the range setting. Repeat the action to assign multiple ranges for the camera. For example, when enterin g 192.16 8.2.5 0 in Start IP Address and 192.168.2.80 in End IP Addr ess, then users with IP addresses between 192.168.2. 50 ~ 192.168.2.80 will not be allowed to access the camera.  Deny IP List The list dis[...]

z Keep the default setting to connect the came ra to any access point under the infrastructure network mode. z To connec t the camer a to a specific access point, set the SSID of the camera to correspond with the access point’s ESSID. The channel will be adjusted automatically. z To connect the camera to an ad-hoc wireless workgroup (without cent[...]

-6 0- Open T he default setting of auth entication mode, which communicates the WEP key across the net work. Shared-key Allow communication o nly with other devices with identical WEP settings. WPA-PSK/ WPA2-PSK Allow communication only with other devices with identical WPA/ WPA2 settings. WPA/ WPA2 provide stronger security than WEP encr yption. F[...]

Standard) is used to ensure t he highest degree of security and authenticity for digital information. Pre-Shared Key: This is use d to identi f y each other in the network. Enter the pre-shared key in the box (8-6 3 characters), and rem emb er that it must match the pre-shared key in all devices connected to the wireless network 4.5 Setting up Vide[...]

-6 2- Video & Audio >> Camera  Image Setting - Brightness: Adjust the brightness level from 0 ~ 100. - Contrast: Adjust the co ntrast level from 0 ~ 100. - Saturation: Adjust the color saturation level from 0 ~ 100 . Click Default to restore the default settings of the three options above. - Mirror: Select the Horizontal option to mirr[...]

Video & Audio >> Video  MPEG4 - Video Resolution: Select the desired video re solution from the three formats: VGA (640 x 480 pixel) , QVGA (320 x 240 pixel) and QQVGA (160 x 120 pixel) . T he higher setting (VGA ) obtains better video quality while it uses more bandwidth on the network. - Video Quality: Select the desired image qualit[...]

-6 4-  MJPEG - Video Resolution: Select the desired video re solution from the three formats: VGA (640 x 480 pixel) , QVGA (320 x 240 pixel) and QQVGA (160 x 120 pixel) . The higher setting (VGA) obtains better video quality while it uses more bandwidth on your network. - Video Quality: Select the desired image quality from five levels: Lowest ,[...]

Video & Audio >> Audio  Camera Microphone In Select the Enable option to enable the camera’s audio function, to receive on-site sound and voice from t he cam era.  Camera Speaker Out Select the Enable option to enable the camera’s external speaker function, so that the connected speaker can play the sound and voice through the c[...]

4.6 Event Server Configuration The Event Server configuration m enu contains three sub-menus tha t allow uploading images to an FTP se rve r, sending emails that include still images, and storing the images to a NAS (Network Attached Storage) server. -6 6-[...]

After completing the required settings for FTP, Email, or Netwo rk Storage, click Test to test if the related configuration is correct or not. Once the camera con nects to the se rver suc ce ssfully, click Apply . Event Server Setting>> FTP  FTP - Host Address: Enter the IP addre ss of the FTP server. - Port Number: Enter the port number u[...]

-6 8- - Password: Enter the pa ssword to login to the FTP server. - Directory Path: Ente r the destin ation folder to upload the images. For example, /Test/ . - Passive Mode: Select the Enable option to enable passive mode. Passive FTP mode is used by some newer FTP servers on the Internet to better work with firewalls. Event Server Setting >>[...]

-6 9- Event Server Setting >> Network Storage  Net Storage - Samba Server Address: Enter the IP address of the NAS server. - Share: Assign the sha red f older on the NAS server. - Path: Assign the path to up load the files on the NAS server. For example, /Test/ . - User Name: Enter the user name to login to the NAS server. - Password: Ente[...]

4.7 Motion Detect The Motion Detect menu contains the settings to enable and set-u p motion detection for the camera. The camera allows to define two motion detection areas. To enable the motion detection area, select Windo w 1 or 2 from the drop-down list, and then select Enable . Whe n the det ection area is enabled, you can use the mouse to defi[...]

4.8 Event Config The Event Config menu contains fo ur sub-menus that provide the settings to configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Filename Prefix: You can assi gn a given prefix to each new captur ed file. Otherwise, leave this option blank to use the default setting. - Network Storage Recordi [...]

Event Configuration >> Arrange Schedule Profile This sub-menu displays the schedul ed profile(s). To customize the profile, click Add an d then enter a descript ive name for the profile in the dialog window. After entering the prof ile name, click OK a nd the profile is added to the Schedule Profiles list. To delete the profile, select the pr[...]

-7 3- Event Configuration >> Motion Detect Trigger Select the Enable option to enable the trigge r function of the camera, to send captured images within the motion detection area to an F TP server, an email receiver, a NAS server, or a conne cted USB device. It’s necessary to configure the correspon ding settings, such as FTP server and em[...]

4.9 Tools The Tools menu provides t he commands to restart or reset the camera, backup and restore the c onfiguration, and up grade the firmware of the camera.  Factory Reset Click Reset to restore all settings of the camera to factory default.  System Reboot Click Reboot to restart the camera just like turning the device off and on. The conf[...]

-7 5-  Configuration Click backup to save the camera configuration a s a b ackup file on the computer. Whenever it’s ne cessa ry to resume the original settings, just restore them by retrieving the ba ckup file. - Backup: Click Ge t the backup file to save the current configuration of the camera. - Resto re: Click Browse to locate the backup f[...]

4.10 USB The USB menu provides the inform atio n about and controls for the connected USB device. -7 6-[...]

-7 7-  USB Dismount To safely remove the connected USB device, pre ss the Unmount button on the camera for four seco nds or click Dismount .  USB Information Display the Total space and Free space of the USB device.  USB Setting - When Disk Full: Select the action to take when the storage space on the USB device is full . Available options[...]

4.11 Information The Information menu displays the curre nt configuration and event log of the camera.  Device Info Display the basic, video & audio, network, and wi rele ss settings of the camera. -7 8-[...]

 System Log The logs table displays the event log recorded by the system.  USB Dismount To safely remove the conn ected USB device, you can press the Unmount button for four seconds o n the camera or click Dismount from this item.  USB Information Display the Total space and Free space of the USB device.  USB Setting - When Disk Full: S[...]

4.11 Information The Information menu displays the cu rre nt configuration and events log of the camera.  Device Info Display the Basic, Video & Audio, and Network settings of the camera.  System Log The Logs table displays the event s log re corded by the system. -8 0-[...]

-8 1- C HAPTER 5 A PPENDIX A.1 Specification  Image Sensor Sensor 1/4” color CMOS Resolution 640x480  Video Compression MPEG4/MJPEG Video resolution VGA (640 x 480 pixel)/ QVGA (320 x 240 pixel)/ QQVGA (160 x 120 pixel); 30fps max.  System Hardware Processor ARM9 bas e RAM 32MB SDRAM ROM 8MB NOR Flash Power DC 5V/2.5A  Communication L[...]

-8 2-  User Interface LAN One RJ-45 port Reset One Reset button USB USB 1.1 port, with one unmount button; Power distribution: 500mA Max. Support FAT, FAT32 file system LEDs Power LED (ambe r); Lin k LED (green)  Audio Input Built-in MIC Output Headphone output jack (M ono) Codec PCM/AMR (AMR is for 3GPP only)  Software OS Support Windows [...]

-8 3- A.2 Glossary of Terms NUMBERS 10BASE-T 10BASE-T is Ethernet over UTP Category III, IV, or V unshielded twisted-pa ir media. 100BA SE-TX The two-pair twisted-media implementation of 100BASE- T is called 100BASE-TX. A ADP CM Adaptive Differential Pulse Code Mod ulation, a ne w technology improved from PCM, which encodes analog sounds to digital[...]

-8 4- C Communication Communication has four components: sender, receiver, message, and medium. In networks, devices and application tasks and process es communicate messages to each other over media. They represent the sender a nd receivers. The data they send is the message. The cabling or transmission method the y use is the medium. Connection I[...]

-8 5- Enterprise network An enterprise network consists of collections of networks connected to each other over a geo gra phically dis persed area. The enterprise net wor k serves the needs of a widely distributed compan y and operates the compan y’s mission-critical applications. Ethernet The most popular LAN communic ation technology. There are[...]

-8 6- Hex Short for hexadecimal refers to the base- 16 number system, which consists of 16 unique symbol s: the numbers 0 to 9 and the letters A to F. For example, the decimal number 15 is repres e nted as F in the hexadecimal numberi ng system. The hexade cimal system is useful because it can repr ese nt every byte (8 bits) as two consecutive hexa[...]

-8 7- ISP ISP (Internet Service Prov ider) is a company that maintains a network that is linked to the Int ernet by way of a dedicated communicatio n lin e. An ISP of fers the use of its dedicated communication lines t o companies or individuals who can’t afford the hi gh monthly cost for a direct connection. J JA VA Java is a programming languag[...]

-8 8- routing messages properly within your network, each device requires a unique IP ad dress. But the addresses may not be valid outside your net work. NAT solves the problem. When devices within yo ur network request information from the Internet, the requests are for warded to the Internet under the router's IP address. NAT distributes the[...]

-8 9- rules called protocols. Protoc ols provi de the g uidelines devices use to communicate wit h eac h other, and thus they have different functions. Some protocols are responsible for formatting and presenti ng and presenting data that will be transferred from file server memory to the file server’s net work adapter Others are respo nsible for[...]

-9 0- Server It is a simple computer that provides resources, such as files or other information. SIP SIP (Session Initiated Protoc ol) is a standard protocol that delivers the real-time communication fo r Voice over IP (VoIP), which establishes sessions for features such as audio and video conferenci ng. SMTP T he Simple Mail Transfer Protocol is [...]

-9 1- UDP The User Datagram Protocol is a connectionless protocol that resides above IP in the TCP/IP suite User Name T he USERNAME is the unique name assi g ned to each person who has access to the LAN. Utility It is a program that performs a specific task. UTP Unshielded twisted-pair. UT P is a form of cable used by all access methods. It consist[...]

SMCWIPCF N G2[...]