Vauxhall Antara (2012) manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 209 pages
- N/A
Aller à la page of
Les manuels d’utilisation similaires
-
Car
Vauxhall Cascada (2013)
1 pages 0.05 mb -
Car
Vauxhall Corsa 2013
177 pages 1.74 mb -
Car
Vauxhall Meriva 2009
240 pages 4.31 mb -
Car
Vauxhall Antara (2009)
236 pages -
Car
Vauxhall Astra GTC 2012
225 pages 2.49 mb -
Car
Vauxhall Corsa (2013)
227 pages -
Car
Vauxhall Combo (2013)
1 pages 0.05 mb -
Car
Vauxhall Cascada (2014)
1 pages 0.05 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Vauxhall Antara (2012). Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Vauxhall Antara (2012) ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Vauxhall Antara (2012) décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Vauxhall Antara (2012) devrait contenir:
- informations sur les caractéristiques techniques du dispositif Vauxhall Antara (2012)
- nom du fabricant et année de fabrication Vauxhall Antara (2012)
- instructions d'utilisation, de réglage et d’entretien de l'équipement Vauxhall Antara (2012)
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Vauxhall Antara (2012) ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Vauxhall Antara (2012) et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Vauxhall en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Vauxhall Antara (2012), comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Vauxhall Antara (2012), l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Vauxhall Antara (2012). À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
0 - 1 Owner’s Manual Model Year 2012 Edition : February 2012 TS 1700-A-12 VAUXHALL Antara Owner’s Manual Model Year 2012 Edition: February 2012 TS 1700-A-12[...]
-
Page 2
Introduction .................................... 2 In brief ............................................ 6 Keys, doors and windows ............ 18 Seats, restraints ........................... 33 Storage ........................................ 52 Instruments and controls ............. 70 Lighting ...................................... 102 Climate[...]
-
Page 3
2 Introduction Introduction[...]
-
Page 4
Introduction 3 Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. This information is available in the sections "Service and maintenance" and "Technical data" as well as on the identification plate. Introduction Your vehicle is a designed combination of advanced technol[...]
-
Page 5
4 Introduction 9 Warning Text marked 9 Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage. Symbols Page references are indicated with 3 . 3 means &quo[...]
-
Page 6
Introduction 5[...]
-
Page 7
6 In brief In brief Initial drive information Vehicle unlocking Press button q to unlock the doors and load compartment. Open the doors by pulling the handles. To open the tailgate, operate button above number plate. Radio remote control 3 19, Central locking system 3 20, Load compartment 3 22. Seat adjustment Seat positioning Pull handle, slide se[...]
-
Page 8
In brief 7 Seat backrests Pull lever, adjust inclination and release lever. Allow the backrest to engage audibly. Do not lean on the seat backrest whilst adjusting it. Seat position 3 34, Seat adjustment 3 35. Seat height Lever pumping motion up = seat higher down = seat lower Seat position 3 34, Seat adjustment 3 35. Power seat adjustment Operate [...]
-
Page 9
8 In brief Positioning = move front switch forwards/backwards Height of front part of seat = move front part of front switch upwards/ downwards Height of rear part of seat = move rear part of front switch upwards/ downwards Height of entire seat = move entire front switch upwards/ downwards Backrest = move upper part of rear switch forwards/backwar[...]
-
Page 10
In brief 9 Mirror adjustment Interior mirror To reduce dazzle, adjust the lever on the underside of the mirror housing. Interior mirror 3 28, Automatic anti- dazzle interior mirror 3 28. Exterior mirrors Select the relevant exterior mirror and adjust it. Convex exterior mirrors 3 26, Electric adjustment 3 26, Folding exterior mirrors 3 27, Heated e[...]
-
Page 11
10 In brief Instrument panel overview[...]
-
Page 12
In brief 11 1 Side air vents ..................... 114 2 Fixed air vents .................... 114 3 High beam .......................... 103 Headlight flash ................... 103 Turn and lane-change signals ................................ 105 Exit lighting ......................... 109 Parking lights ..................... 106 Cruise control ...[...]
-
Page 13
12 In brief Exterior lighting Turn light switch AUTO = Automatic light control: Headlights are switched on and off automatically. 7 = Off (or deactivation of automatic light control) 8 = Sidelights 9 = Headlights Press button > = Front fog lights r = Rear fog light Lighting 3 102. Headlight flash, high beam and low beam headlight flash = pull le[...]
-
Page 14
In brief 13 Hazard warning flashers Operated with the ¨ button. Hazard warning flashers 3 104. Horn Press j . Washer and wiper systems Windscreen wiper & = fast % = slow $ = timed interval wiping or automatic wiping with rain sensor § = off For a single wipe when the windscreen wiper is off, press the lever down. Windscreen wiper 3 71, Wiper [...]
-
Page 15
14 In brief Windscreen and headlight washer systems Pull lever. Windscreen and headlight washer system 3 71, Washer fluid 3 147. Rear window wiper and washer system Wiper on = push lever Wiper off = pull lever Wash = press and hold button Rear window wiper and washer system 3 73, Wiper blade replacement 3 151, Washer fluid 3 147. Climate control He[...]
-
Page 16
In brief 15 Demisting and defrosting the windows Air distribution to l . Cooling n and air recirculation 4 are switched on automatically to improve defrosting efficiency. Set temperature to highest level. Set fan speed to highest level. Switch on heated rear window Ü . Close centre air vents, open side air vents and direct them towards the door wi[...]
-
Page 17
16 In brief Starting off Check before starting off ■ Tyre pressure and condition 3 168, 3 198. ■ Engine oil level and fluid levels 3 145. ■ All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational. ■ Proper position of mirrors, seats, and seat belts 3 26, 3 34, 3 40. ■ Brake function a[...]
-
Page 18
In brief 17 Parking ■ Always apply the electrical parking brake. Pull switch m . For maximum force, e.g. parking with a trailer or on inclines, pull switch m twice. ■ Switch off the engine and turn the ignition key to position LOCK , push key into ignition switch and remove. Turn the steering wheel until the steering wheel lock is felt to engag[...]
-
Page 19
18 Keys, doors and windows Keys, doors and windows Keys, locks ................................... 18 Doors ........................................... 22 Vehicle security ............................ 23 Exterior mirrors ............................ 26 Interior mirrors ............................. 28 Windows ...................................... [...]
-
Page 20
Keys, doors and windows 19 Radio remote control Used to operate: ■ Central locking system ■ Anti-theft locking system ■ Anti-theft alarm system The radio remote control has a range of approx. 6 metres. This range can be affected by outside influences. The hazard warning flashers confirm operation. Handle with care, protect from moisture and h[...]
-
Page 21
20 Keys, doors and windows Key with fixed key section Open the unit with a small screwdriver in the notch on the cover. Replace the battery (battery type CR2032), paying attention to the installation position. Close the unit. Central locking system Unlocks and locks doors, load compartment and fuel filler flap. Notice In the event of an accident of[...]
-
Page 22
Keys, doors and windows 21 Unlocking the tailgate Press button q . The tailgate is unlocked together with the doors. With the engine running, the tailgate will only unlock when the electrical parking brake is applied or automatic transmission is in position P . Central locking buttons Locks or unlocks all doors, the load compartment and fuel filler[...]
-
Page 23
22 Keys, doors and windows Doors Load compartment Tailgate Opening Operate the button above the number plate and lift the tailgate. If the tailgate is open when the ignition is switched on, control indicator 1 illuminates in the instrument cluster 3 88. Central locking system 3 20. Caution Ensure there are no obstructions and that there is adequate[...]
-
Page 24
Keys, doors and windows 23 Fault To open the tailgate in the event of power interruption: Remove the interior trim cover from the central latch area, then push the lever using a suitable tool. Vehicle security Anti-theft locking system 9 Warning Do not use the system if there are people in the vehicle! The doors cannot be unlocked from the inside. [...]
-
Page 25
24 Keys, doors and windows ■ Siren power supply ■ Ignition Activation Ensure the doors, tailgate, fuel filler flap, bonnet, windows and sunroof are closed. Press button p on radio remote control or manually lock the driver's door. The system is activated: ■ Automatically, 30 seconds after locking the vehicle (initialisation of the system[...]
-
Page 26
Keys, doors and windows 25 3. Close doors. 4. Activate the anti-theft alarm system. Press button o again to cancel. Control indicator o extinguishes. Status LED Status LED is located in the centre console. Status during the first 30 seconds of anti-theft alarm system activation: LED illuminates = test, arming delay. LED flashes quickly = doors, tai[...]
-
Page 27
26 Keys, doors and windows Immobiliser The system is integrated into the ignition switch and checks whether the vehicle is allowed to start with the key being used. If the transponder in the key is recognized, the engine can be started. The electronic immobiliser is activated automatically after the key has been removed from the ignition switch. Co[...]
-
Page 28
Keys, doors and windows 27 Folding For pedestrian safety, the exterior mirrors will swing out of their normal mounting position if they are struck with sufficient force. Reposition the mirror by applying slight pressure to the mirror housing. Manual folding Press lightly on the outside of the mirror housing to fold in the exterior mirrors. Electric[...]
-
Page 29
28 Keys, doors and windows Do not use sharp instruments or abrasive cleaners on the exterior mirrors and avoid scratching or damaging the heating elements. Interior mirrors Manual anti-dazzle To reduce dazzle, adjust the lever on the underside of the mirror housing. Automatic anti-dazzle Press button on mirror housing to turn function on; button il[...]
-
Page 30
Keys, doors and windows 29 Windows Windscreen Heat-reflecting windscreen The heat-reflecting windscreen has a coating which reflects solar radiation. Also data signals, e.g. from toll stations, might be reflected. The marked areas of the windscreen behind the interior mirror are not covered with the coating. Devices for electronic data recording an[...]
-
Page 31
30 Keys, doors and windows Additional switches are located in the front passenger's door and the rear doors. The rear windows do not open fully. Safety function If the window glass encounters resistance above the middle of the window during automatic closing, it is immediately stopped and opened again. Override safety function In the event of [...]
-
Page 32
Keys, doors and windows 31 Do not use sharp instruments or abrasive cleaners on the rear window and avoid scratching or damaging the heating elements. Sun visors The sun visors can be folded down or swivelled to the side to prevent dazzling. Sun visors have vanity mirrors and a ticket holder on the rear. When the vanity mirror covers are opened, th[...]
-
Page 33
32 Keys, doors and windows General hints Function standby The sunroof can be operated: ■ with ignition on, ■ within 10 minutes of switching ignition off, After switching off the ignition, sunroof operation is disabled when driver's door is opened.[...]
-
Page 34
Seats, restraints 33 Seats, restraints Head restraints ............................ 33 Front seats ................................... 34 Rear seats ................................... 38 Seat belts ..................................... 39 Airbag system .............................. 43 Child restraints ............................. 47 Head restrai[...]
-
Page 35
34 Seats, restraints Stow head restraints securely in load compartment. Active head restraints on front seats In the event of a rear-end impact, the active head restraints automatically tilt forwards. The head is more effectively supported by the head restraint and the risk of whiplash injury is reduced. Do not attach objects or components that are[...]
-
Page 36
Seats, restraints 35 Seat adjustment 9 Danger Do not sit nearer than 25 cm from the steering wheel, to permit safe airbag deployment. 9 Warning Never adjust seats while driving as they could move uncontrollably. Seat positioning Pull handle, slide seat, release handle. Seat backrests Pull lever, adjust inclination and release lever. Allow the backr[...]
-
Page 37
36 Seats, restraints Lumbar support Adjust lumbar support to suit personal requirements using the lever. To increase or decrease lumbar support, move lever forwards or backwards. Seat folding Push head restraint all the way down. Slide seat as far back as it will go. Lift release lever and fold backrest down onto seat cushion. Lower lever and backr[...]
-
Page 38
Seats, restraints 37 Seat positioning Move front switch forwards/ backwards. Seat height Move front of switch upwards/ downwards to adjust height of front part of seat cushion. Move rear of switch upwards/ downwards to adjust height of rear part of seat cushion. Move front and rear of switch upwards/downwards to adjust height of entire seat cushion[...]
-
Page 39
38 Seats, restraints If temperature continues to rise, turn seat heating off and seek the assistance of a workshop. Rear seats Seat backrests To adjust seat backrests, lift release lever on top of backrest and move backrest forwards/backwards to desired position. Do not lean on the backrest whilst adjusting it. When folding the backrests, ensure th[...]
-
Page 40
Seats, restraints 39 Push head restraints all the way down, lift backrest release lever and fold backrest forwards and down onto seat cushion. Do not allow passengers to sit on a folded backrest, or place any unrestrained loads on it. To move backrest to its original position, lift and push the backrest into place and ensure the backrest engages. S[...]
-
Page 41
40 Seats, restraints Seat belts are designed to be used by only one person at a time. They are not suitable for people smaller than 150 cm. Child restraint system 3 47. Periodically check all parts of the belt system for damage and proper functionality. Have damaged components replaced. After an accident, have the belts and triggered belt pretensio[...]
-
Page 42
Seats, restraints 41 Loose or bulky clothing prevents the belt from fitting snugly. Do not place objects such as handbags or mobile phones between the belt and your body. 9 Warning The belt must not rest against hard or fragile objects in the pockets of your clothing. Height adjustment 1. Squeeze release buttons together. 2. Slide adjuster up or do[...]
-
Page 43
42 Seats, restraints Removing To release belt, press red button on belt buckle. Using the seat belt while pregnant 9 Warning The lap belt must be positioned as low as possible across the pelvis to prevent pressure on the abdomen. Front passenger seat belt reminder When the engine is running, control indicator k flashes then illuminates if the passe[...]
-
Page 44
Seats, restraints 43 Airbag system The airbag system consists of a number of individual systems depending on the scope of equipment. When triggered the airbags inflate within milliseconds. They also deflate so quickly that it is often unnoticeable during the collision. 9 Warning If handled improperly the airbag systems can be triggered in an explos[...]
-
Page 45
44 Seats, restraints The inflated airbags cushion the impact, thereby considerably reducing the risk of injury to the upper body and head of the front seat occupants. 9 Warning Optimum protection is only provided when the seat is in the proper position 3 34. Keep the area in which the airbag inflates clear of obstructions. Fit the seat belt correct[...]
-
Page 46
Seats, restraints 45 Curtain airbag system The curtain airbag system consists of an airbag in the roof frame on each side. This can be identified by the word AIRBAG on the roof pillars. The curtain airbag system is triggered in the event of a side-on impact of a certain severity. The ignition needs to be switched on. The curtain airbag system is tr[...]
-
Page 47
46 Seats, restraints Use the ignition key to choose the position: * OFF = front passenger airbag systems are deactivated and will not inflate in the event of a collision. Control indicator * illuminates continuously on the passenger side of the instrument panel. A child restraint system can be installed in accordance with the chart Child restraint [...]
-
Page 48
Seats, restraints 47 Child restraints Child restraint systems We recommend the Vauxhall child restraint system which is tailored specifically to the vehicle. When a child restraint system is being used, pay attention to the following usage and installation instructions and also those supplied with the child restraint system. Always comply with loca[...]
-
Page 49
48 Seats, restraints Child restraint installation locations Permissible options for fitting a child restraint system Weight and age class On front passenger seat On rear outboard seats On rear centre seat activated airbag deactivated airbag Group 0: up to 10 kg or approx. 10 months X U 1 U, < X Group 0+: up to 13 kg or approx. 2 years X U 1 U, &[...]
-
Page 50
Seats, restraints 49 Permissible options for fitting an ISOFIX child restraint system Weight and age class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat Group 0: up to 10 kg or approx. 10 months E ISO/R1 X IL X Group 0+: up to 13 kg or approx. 2 years E ISO/R1 X IL X D ISO/R2 X IL X C ISO/R3 X IL X Group I: 9[...]
-
Page 51
50 Seats, restraints ISOFIX size class and seat device A - ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg. B - ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg. B1 - ISO/F2X = Forward-facing child restraint system for smaller children in th[...]
-
Page 52
Seats, restraints 51 ISOFIX child restraint systems Fasten vehicle-approved ISOFIX child restraint systems to the ISOFIX mounting brackets. Permitted installation positions for specific vehicle ISOFIX child restraint systems are marked in the table by IL. No more than two ISOFIX child restraint systems can be installed on the rear seats at the same[...]
-
Page 53
52 Storage Storage Storage compartments ................ 52 Load compartment ....................... 63 Roof rack system ......................... 68 Loading information ..................... 68 Storage compartments Glovebox The glovebox will illuminate when opened. The glovebox partition can be removed from its groove. Store the partition in the g[...]
-
Page 54
Storage 53 Located in the front passenger foot well. Coin storage Pull handle to open. Push door firmly to close. Card holder Located above the coin storage compartment. A card can be retained in the slot for convenient use. Sunglasses storage To open: push the rear part of the cover. To close: pull up cover and push it until it latches into place.[...]
-
Page 55
54 Storage Armrest storage Console box in front armrest To open: pull up lever and lift the lid. To close: lower lid and push it down until it latches into position. Centre console storage To access the storage compartment, cigarette lighter and AUX input, slide the cupholder tray rearwards. Rear carrier system The rear carrier system (Flex-Fix sys[...]
-
Page 56
Storage 55 Raise release lever. The system disengages and travels quickly out of the bumper. Completely pull out the rear carrier system until it engages. Ensure that it is not possible to push in the rear carrier system without pulling the release lever again. 9 Warning It is only permissible to fit objects to the rear carrier system if the system[...]
-
Page 57
56 Storage Open out the bulb holder on the back of the tail lamp completely. Push the clamping lever and push the bulb holder into the retainer until it hits the stop. Perform this procedure for both tail lamps. Check the cable and lamp position to make sure these are correctly installed and are securely located. Lock the rear carrier system Swivel[...]
-
Page 58
Storage 57 Unfold pedal crank recesses Fold one or both pedal crank recesses upwards until the diagonal support engages. Remove the pedal crank mounts from the pedal crank recesses. Adapting the rear carrier system to a bicycle With the rotary lever on the pedal crank recess, roughly adapt the adjustable pedal crank unit to the protrusion of the pe[...]
-
Page 59
58 Storage If the bicycle has curved pedal cranks, screw in the pedal crank unit all the way (position 1 ). Press the release lever and withdraw the wheel recesses. Push the release lever on the strap retainer and remove the strap retainer. Prepare the bicycle for attachment Notice The maximum width for the pedal crank is 38,3 mm and the maximum de[...]
-
Page 60
Storage 59 Attaching a bicycle to the rear carrier system Put on the bicycle. The pedal crank here must be placed in the pedal crank recess opening as shown in the illustration. Caution Make sure that the pedal does not touch the surface of the rear end carrier. Otherwise the bicycle chainset might be damaged during transport. Insert pedal crank mo[...]
-
Page 61
60 Storage Align the bicycle in the longitudinal direction of the vehicle: Slightly loosen the pedal mount. Place the bicycle upright using the rotary lever on the pedal crank recess. If the two bicycles obstruct one another, the relative positions of the bicycles can be adapted by adjusting the wheel recesses and the rotary lever on the pedal cran[...]
-
Page 62
Storage 61 Removing a bicycle from the rear carrier system Undo strap retainers on both bicycle tyres. Hold on to the bicycle, loosen the attachment screw for the pedal bearing mount, then lift the pedal bearing mount to remove it. Retracting the rear carrier system Push the pedal crank mounts into the pedal crank recess as shown in the illustratio[...]
-
Page 63
62 Storage Press release lever and slide in wheel recesses all the way as far as they will go. Disengage the locking lever on the diagonal support and fold both pedal crank recesses down. 9 Warning Risk of pinching. Swivel first the right clamping lever ( 1 ) forwards, followed by the left clamping lever ( 2 ), until they can be engaged in their re[...]
-
Page 64
Storage 63 Pull up license plate holder and fold down into horizontal position. Open the tailgate. Raise the release lever up and push the system into the bumper until it engages. Release lever must return to original position. 9 Warning If the system cannot be correctly engaged, please seek the assistance of a workshop. Load compartment Storage co[...]
-
Page 65
64 Storage Closing the cover Pull load compartment cover towards rear of vehicle using handle and insert retainers into brackets on either side of load compartment. Opening the cover Remove load compartment cover from side brackets. The cover rolls up automatically. Removing the cover Open load compartment cover. Pull socket on either side of cover[...]
-
Page 66
Storage 65 Hang the hook to the upper part of the tailgate opening. Caution Do not allow objects to protrude above the top of the rear floor storage compartment, to avoid damage to the storage area and the load compartment floor. Jack and vehicle tools 3 165. Tyre repair kit 3 171. Temporary spare wheel 3 177. Lashing eyes The lashing eyes are desi[...]
-
Page 67
66 Storage Variable partition net Insert an adapter into each rail: fold open the handle plate, insert adapter into upper and lower groove of rail and move to required position. Turn handle plate upwards to lock the adapter. The rods of the net must be extended before inserting into the adapters: pull out all of the end pieces and lock by rotating [...]
-
Page 68
Storage 67 When fitting in front of the rear seats, push head restraints of the rear seats down and fold down rear seat backrests 3 38. Open aperture covers on the roof frame and insert top corners of safety net into large apertures in roof frame and secure by sliding them into the smaller apertures. In front of and behind the rear seats on both si[...]
-
Page 69
68 Storage Roof rack system Roof rack For safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended. Fasten the roof rack to the roof rails following the instructions that accompany the system, ensuring that the roof load is evenly distributed over the side or cross rails. Loads must not be placed on the r[...]
-
Page 70
Storage 69 vehicle weight (see identification plate 3 189) and the EC kerb weight. To calculate the EC kerb weight, enter the data for your vehicle in the Weights table at the front of this manual. The EC kerb weight includes weights for the driver (68 kg), luggage (7 kg) and all fluids (tank 90 % full). Optional equipment and accessories increase [...]
-
Page 71
70 Instruments and controls Instruments and controls Controls ....................................... 70 Warning lights, gauges and indicators ..................................... 77 Information displays ..................... 88 Vehicle messages ........................ 96 Trip computer ............................... 97 Controls Steering wheel ad[...]
-
Page 72
Instruments and controls 71 Horn Press j . Windscreen wiper/washer Windscreen wiper & = fast % = slow $ = timed interval wiping or automatic wiping with rain sensor § = off For a single wipe when the windscreen wiper is off, press the lever down. Do not use if the windscreen is frozen. Switch off in car washes. Adjustable wiper interval To set[...]
-
Page 73
72 Instruments and controls In this mode, wiping frequency is also affected by vehicle speed. As vehicle speed increases, wiping will become more frequent. Automatic wiping with rain sensor $ = automatic wiping with rain sensor The rain sensor detects the amount of water on the windscreen and automatically regulates the frequency of the windscreen [...]
-
Page 74
Instruments and controls 73 Control indicator G illuminates in the instrument cluster when the washer fluid level is low. Wiper activated lighting With light switch in the AUTO position, when the windscreen wiper is operated for 8 cycles or more the exterior lights illuminate automatically. Rear window wiper/washer Move lever to activate the rear w[...]
-
Page 75
74 Instruments and controls 9 Warning The road surface may already be icy even though the display indicates a few degrees above 0 °C. Clock Date and time are shown in the Info-Display. Board-Info-Display 3 88. Graphic-Info-Display, Colour-Info-Display 3 91. Automatic time synchronisation Board-Info-Display The RDS (Radio Data System) signal of mos[...]
-
Page 76
Instruments and controls 75 Deactivate ( Clock Sync.Off ) or activate ( Clock Sync.On ) automatic time synchronisation with the arrow buttons on the Infotainment system. To set date and time manually, select the menu item for time and date setting from the Settings menu and make the desired setting. The value ready for modification is marked with a[...]
-
Page 77
76 Instruments and controls A 12 Volt power outlet is located in the rear centre console and on the right- hand side of the load compartment. Pull the cap out to use the accessory socket, and replace the cap when not in use. Do not exceed the maximum power consumption of 120 watts. Operational with ignition switch in positions ACC or ON . Use of ac[...]
-
Page 78
Instruments and controls 77 To replace battery: remove screw on ashtray lid and replace with CR 2032 (or equivalent) battery. Warning lights, gauges and indicators Speedometer Indicates vehicle speed. Odometer The bottom line displays the recorded distance. Trip odometer The top line displays the recorded distance since the last reset. There are tw[...]
-
Page 79
78 Instruments and controls Tachometer Displays the engine speed. Drive in a low engine speed range for each gear as much as possible. Caution If the needle is in the red warning zone, the maximum permitted engine speed is exceeded. Engine at risk. Fuel gauge Displays the fuel level in the tank. Control indicator Y illuminates if the level in the t[...]
-
Page 80
Instruments and controls 79 When the ignition is switched on, most control indicators will illuminate briefly as a functionality test. The control indicator colours mean: red = danger, important reminder yellow = warning, information, fault green = confirmation of activation blue = confirmation of activation Control indicators on the instrument pan[...]
-
Page 81
80 Instruments and controls Control indicators in the instrument cluster[...]
-
Page 82
Instruments and controls 81 Turn signal O illuminates or flashes green. The relevant control indicator flashes when the turn signal is switched on 3 105. Rapid flashing: failure of a turn signal bulb or the associated fuse or failure of a turn signal light on trailer. Both control indicators flash when the hazard warning flashers are active 3 104. [...]
-
Page 83
82 Instruments and controls Illuminates when the ignition is switched on and extinguishes shortly after the engine starts. If it does not illuminate, seek the assistance of a workshop. Can illuminate briefly when driving; this is normal and does not indicate a system fault. Illuminates when the engine is running Fault in the emission control system[...]
-
Page 84
Instruments and controls 83 When the engine is started, m illuminates briefly. If it does not illuminate, seek the assistance of a workshop. Illuminates Electrical parking brake is applied 3 129. Flashes Electrical parking brake is not fully applied or released. Switch on ignition, depress brake pedal and attempt to reset the system by first releas[...]
-
Page 85
84 Instruments and controls Green Illuminates when system is ready for operation. Flashes during driving when system is in operation, after pressing the u button. Yellow Flashes to indicate system is not ready for conditions to operate. Illuminates to indicate there is a fault in the system. If it flashes or illuminates during driving, friction mat[...]
-
Page 86
Instruments and controls 85 Engine coolant temperature W illuminates red. When the engine is started, W illuminates briefly. If it does not illuminate, seek the assistance of a workshop. Illuminates when the engine is running Stop vehicle and switch off engine. Caution Coolant temperature too high. Check coolant level 3 146. If there is sufficient [...]
-
Page 87
86 Instruments and controls 9 Warning When the engine is off, considerably more force is needed to brake and steer. Do not remove key until vehicle is stationary, otherwise the steering wheel lock could engage unexpectedly. Check oil level before seeking the assistance of a workshop 3 145. Low engine oil level S illuminates yellow. When the ignitio[...]
-
Page 88
Instruments and controls 87 Residual water in the diesel fuel filter must be drained 3 150. Seek the assistance of a workshop as soon as possible. Immobiliser d illuminates red. When the engine is started, d illuminates briefly. If it does not illuminate, seek the assistance of a workshop. Illuminates to indicate a fault in the immobiliser system. [...]
-
Page 89
88 Instruments and controls control indicator W flashes, accompanied by a warning chime, to warn the driver to reduce speed as appropriate. Trailer indicator g illuminates green. Illuminates when a trailer is connected to the vehicle 3 139. Bonnet open / illuminates red. Illuminates when the bonnet is open. Stop-start system 3 118. Door open 9 illu[...]
-
Page 90
Instruments and controls 89 The Info-Display is located in the instrument panel above the Infotainment system. An F in the display indicates a fault. Have the cause of the fault remedied by a workshop. Trip computer, Board-Info-Display 3 97. Selecting functions Functions and settings of the Infotainment system can be accessed via the Info-Display. [...]
-
Page 91
90 Instruments and controls System settings Press the Settings button of the Infotainment system. Menu item Audio then opens. Call up System with the left arrow button and select with the OK button. The first function of the System menu is highlighted. Some of the functions appear on the display in an abbreviated form. The functions are displayed i[...]
-
Page 92
Instruments and controls 91 The value ready for modification is marked with arrows. Use the arrow buttons to make the required setting. The setting is saved when the menu item is exited. Ignition logic See Infotainment system instruction manual. Language selection The display language for some functions can be selected. Select the required language[...]
-
Page 93
92 Instruments and controls The type of information and how it is displayed depends on the equipment of the vehicle and the settings of the trip computer and Infotainment system. Some information appears on the display in an abbreviated form. An F in the display indicates a fault. Have the cause of the fault remedied by a workshop. Trip computer, G[...]
-
Page 94
Instruments and controls 93 Select using the left adjuster wheel on the steering wheel Turn the adjuster wheel to call up the required function. Press the adjuster wheel to select marked items and confirm commands. Press to operate the stop watch or restart measurement and calculation. Trip computer 3 99. Function areas For each function area there[...]
-
Page 95
94 Instruments and controls ■ Contrast ■ Day / Night ■ Ignition logic Setting date and time With the navigation system, date and time are set automatically upon receipt of a GPS satellite signal. If the displayed time does not match local time, it can be corrected manually or automatically by receiving an RDS time signal. Some RDS transmitter[...]
-
Page 96
Instruments and controls 95 Select the desired language. Selections are indicated by a 6 in front of the menu item. In systems with voice output, when the language setting of the display is changed, the system will ask whether the announcement language should also be changed – see Infotainment system instruction manual. Setting units of measure S[...]
-
Page 97
96 Instruments and controls Always day design ; black or coloured text on a light background. Always night design ; white or coloured text on a dark background. Selections are indicated by a o in front of the menu item. Ignition logic See Infotainment system instruction manual. Vehicle messages Warning chimes When starting the engine or whilst driv[...]
-
Page 98
Instruments and controls 97 Reduce speed and check tyre pressure at the next opportunity. Tyre pressure monitoring system 3 168. Check tyre pressures 3 168, 3 198. If there is a considerable loss of pressure, a corresponding message appears indicating the relevant tyre. Steer out of the flow of traffic as quickly as possible without endangering oth[...]
-
Page 99
98 Instruments and controls Average consumption Display of average consumption. The measurement can be reset at any time. Effective consumption Display of the amount of fuel consumed. The measurement can be reset at any time. Average speed Display of average speed. The measurement can be reset at any time. Stoppages in the journey with the ignition[...]
-
Page 100
Instruments and controls 99 Interruption of power supply If the power supply has been interrupted or if the battery voltage has dropped too low, the values stored in the trip computer will be lost. Trip computer in Graphic- Info-Display or Colour- Info-Display The trip computers provide information on driving data, which is continually recorded and[...]
-
Page 101
100 Instruments and controls Instantaneous consumption Display of the instantaneous consumption. Display changes depending on speed: Display in gal/h = below 8 mph Display in miles/gal = above 8 mph Distance travelled Display of distance travelled. The measurement can be reset at any time. Average speed Display of average speed. The measurement can[...]
-
Page 102
Instruments and controls 101 Stop watch Select menu item Timer from the Board Computer menu. The Timer menu is displayed. To start, select menu item Start . To reset, select menu item Reset . The desired stop watch display can be selected from the Options menu: Driving Time excl. Stops : The time the vehicle is in motion is recorded. Stationary tim[...]
-
Page 103
102 Lighting Lighting Exterior lighting .......................... 102 Interior lighting ........................... 107 Lighting features ........................ 109 Exterior lighting Light switch Turn light switch: AUTO = Automatic light control: Headlights are switched on and off automatically depending on external lighting conditions. 7 = Off [...]
-
Page 104
Lighting 103 To ensure automatic light control functions properly, do not cover the light sensor on top of the instrument panel. Daytime running lights Daytime running lights increase visibility of the vehicle during daylight. The lights operate automatically when the ignition is switched on. Driving abroad 3 104. Wiper activated lighting With ligh[...]
-
Page 105
104 Lighting Vehicles without automatic level control system Turn thumb wheel to required position: 0 = front seats occupied 1 = all seats occupied 2 = all seats occupied and load compartment laden 3 = driver's seat occupied and load compartment laden Vehicles with automatic level control system Turn thumb wheel to required position: 0 = front[...]
-
Page 106
Lighting 105 Turn and lane-change signals lever up = right turn signal lever down = left turn signal If the lever is moved past the resistance point, the turn signal is switched on constantly. When the steering wheel is turned back, the turn signal is automatically deactivated. This will not happen when making a minor steering manoeuvre such as lan[...]
-
Page 107
106 Lighting Rear fog lights Operated with the r button. Control indicator r illuminates in the instrument cluster when the rear fog light is switched on. The rear fog light can only be switched on when the ignition is on and the light switch is in position 9 , or the front fog lights are on and the light switch is in position 8 . Light switch in p[...]
-
Page 108
Lighting 107 Interior lighting Instrument panel illumination control The instrument panel illuminates when the ignition is switched on. Brightness can be adjusted when the exterior lights are on: Turn thumb wheel to the right or left until the desired brightness is obtained. If driver's door is opened or q is pressed on the remote control, ins[...]
-
Page 109
108 Lighting Switch off immediately by pressing button K in the roof lining. Ashtray illumination The portable front ashtray, located in the front drink holder, illuminates depending on outside light conditions. Glovebox illumination Illuminates when the glovebox is opened. Load compartment lighting Illuminates when a door or the tailgate is opened[...]
-
Page 110
Lighting 109 Lighting features Entry lighting Welcome lighting Depending upon outside light conditions, when unlocking the vehicle with the remote control the hazard warning lights flash twice and the exterior and interior lights illuminate for 20 seconds. This function facilitates locating the vehicle when it is dark. Exit lighting The low beam an[...]
-
Page 111
110 Climate control Climate control Climate control systems ............. 110 Air vents ..................................... 114 Maintenance .............................. 115 Climate control systems Heating and ventilation system Controls for: ■ Temperature ■ Air distribution ■ Fan speed Heated rear window Ü 3 30. Heated seats 3 37. Temper[...]
-
Page 112
Climate control 111 Air conditioning system In addition to the heating and ventilation system, the air conditioning system has: n = cooling 4 = air recirculation Ü = demisting and defrosting Cooling n Operated with the n button and is functional only when the engine and fan are running. The air conditioning system cools and dehumidifies (dries) as[...]
-
Page 113
112 Climate control ■ Set the air distribution switch to l or J . ■ Set temperature control to warmest level. ■ Set fan to highest level. ■ Close centre air vents. ■ Open side air vents and direct them towards the door windows. ■ Switch on heated rear window Ü 3 30. Air conditioning n and air recirculation 4 are switched on automatical[...]
-
Page 114
Climate control 113 Recommended comfort setting is 22 °C. Intermediate settings are possible. To deactivate automatic mode, turn fan to position off x . All air vents are actuated automatically in automatic mode. The air vents should therefore always be open. Automatic air recirculation t The automatic air recirculation system has an air quality s[...]
-
Page 115
114 Climate control Air vents Adjustable air vents To open and close the vents, turn the horizontal adjuster wheel to the left or right. Open air vents when air distribution switch is set to M or L . The air supply is increased by switching on the fan. Control the air temperature at the side air vents by adjusting the temperature control switch. Di[...]
-
Page 116
Climate control 115 Maintenance Air intake The air intakes in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow. Pollen filter Cabin air filtration A particle filter cleans the cabin air from dust, soot, pollen and spores. Active carbon filter In addition to the particle filter[...]
-
Page 117
116 Driving and operating Driving and operating Driving hints ............................... 116 Starting and operating ............... 116 Engine exhaust .......................... 120 Automatic transmission .............. 122 Manual transmission .................. 126 Drive systems ............................ 126 Brakes ........................[...]
-
Page 118
Driving and operating 117 Ignition switch positions LOCK = Ignition off ACC = Steering wheel lock released, ignition off ON = Ignition on, for diesel engine: preheating START = Starting Starting the engine Manual transmission: operate clutch and brake pedals. Automatic transmission: operate brake pedal and move selector lever to P or N . Do not ope[...]
-
Page 119
118 Driving and operating Ensure the engine oil is of the correct viscosity, the correct fuel is used, vehicle services are performed regularly and the battery is sufficiently charged. Stop-start system The stop-start system helps to save fuel and to reduce the exhaust emissions. When conditions allow, it switches off the engine as soon as the vehi[...]
-
Page 120
Driving and operating 119 Conditions for an Autostop The stop-start system checks if each of the following conditions is fulfilled. Otherwise an Autostop will be inhibited. ■ The stop-start system is not manually deactivated ■ the bonnet is fully closed ■ the driver's door is closed or the driver's seat belt is fastened ■ the batt[...]
-
Page 121
120 Driving and operating For maximum force, e.g. parking with a trailer or on inclines, pull switch m twice. ■ Switch off the engine and turn the ignition key to position LOCK , push key into ignition switch and remove. Turn the steering wheel until the steering wheel lock is felt to engage. For vehicles with automatic transmission, depress foot[...]
-
Page 122
Driving and operating 121 The filter is cleaned by periodically burning off the soot particles at high temperature. This process takes place automatically under set driving conditions and may take up to 15 minutes. Fuel consumption may be higher during this period. The emission of smells and smoke during this process is normal. Under certain drivin[...]
-
Page 123
122 Driving and operating Caution Fuel grades other than those listed on pages 3 136, 3 193 could damage the catalytic converter or electronic components. Unburnt petrol will overheat and damage the catalytic converter. Therefore avoid excessive use of the starter, running the fuel tank dry and starting the engine by pushing or towing. In the event[...]
-
Page 124
Driving and operating 123 The selector lever is locked in position P and N and can only be moved when the ignition is on and the foot brake is applied. To engage P or R , push the release button. Never shift to P or R while the vehicle is moving. The engine can only be started with lever in position P or N . Depress foot brake or apply electrical p[...]
-
Page 125
124 Driving and operating transmission will automatically shift to a lower gear, even in manual mode, to prevent the engine from stalling. If a higher gear is selected when vehicle speed is too low, or a lower gear when vehicle speed is too high, the shift is not executed. In manual mode, no automatic shifting to a higher gear takes place at high e[...]
-
Page 126
Driving and operating 125 Deactivation Fuel economy mode is switched off by pressing button s again; control indicator s extinguishes in the instrument cluster. Fault In the event of a fault in the automatic transmission, control indicator Z illuminates in the instrument cluster 3 81. Automatic shifting may be much harsher than normal or, in the ca[...]
-
Page 127
126 Driving and operating Manual transmission Reverse: with the vehicle stationary, wait 3 seconds after depressing clutch pedal and engage the gear. If the gear does not engage, set the lever to neutral, release the clutch pedal and depress again; then repeat gear selection. Do not grind the clutch unnecessarily. When operating, depress the clutch[...]
-
Page 128
Driving and operating 127 Ensure tyres (including the spare) are inflated to the correct pressure 3 198 and are suitable for the prevailing road conditions. For optimum system performance, the vehicle's tyres should not have varying degrees of wear. If control indicator B flashes in the instrument cluster during driving, All- wheel drive is te[...]
-
Page 129
128 Driving and operating operations for wading , involving checks for water contamination, at the earliest opportunity. Service checks after wading Check for the ingress of water into the following: ■ Brake fluid reservoir ■ Air cleaner element ■ Engine ■ Transmission ■ Axles ■ Interior of vehicle Renew any lubricating oil or hydraulic[...]
-
Page 130
Driving and operating 129 Brakes The brake system comprises two independent brake circuits. If a brake circuit fails, the vehicle can still be braked using the other brake circuit. However, braking effect is achieved only when the brake pedal is depressed firmly. Considerably more force is needed for this. The braking distance is extended. Seek the[...]
-
Page 131
130 Driving and operating Applying when vehicle is stationary Pull switch m , the electrical parking brake operates automatically with adequate force. For maximum force, e.g. parking with a trailer or on inclines, pull switch m twice. The electrical parking brake can always be activated, even if the ignition is off. Do not operate electrical parkin[...]
-
Page 132
Driving and operating 131 movement. Seek the assistance of a workshop to have the cause of the fault remedied. Brake assist If the brake pedal is depressed quickly and forcefully, maximum brake force is automatically applied (full braking). Maintain steady pressure on the brake pedal for as long as full braking is required. Maximum brake force is a[...]
-
Page 133
132 Driving and operating Switch off ESC function, to allow engine rpm to increase, by pressing button t briefly. Control indicator t illuminates in the instrument cluster. ESC is reactivated by pressing button t again. The control indicator extinguishes. Control indicator t 3 84. Hydraulic brake assist When the ESC function comes into action and r[...]
-
Page 134
Driving and operating 133 Deactivation Press button u again. The green control indicator u extinguishes. Depressing the foot brake or accelerator will also cause the system to be deactivated. Fault The yellow control indicator u flashes to indicate that the system is not ready for conditions to operate, due to the high temperature (approx. 350 - 40[...]
-
Page 135
134 Driving and operating With automatic transmission, only activate cruise control in automatic mode. Control indicator m 3 87. Activation Press the e button; control indicator m illuminates yellow in the instrument cluster. Accelerate to the desired speed, press the - SET button and release it. The current speed is stored and maintained. Control [...]
-
Page 136
Driving and operating 135 Object detection systems Parking assist The parking assist system makes parking easier by measuring the distance between the vehicle and obstacles to the front and rear, and giving acoustic signals. It is the driver, however, who bears full responsibility for the parking manoeuvre. The system consists of four ultrasonic pa[...]
-
Page 137
136 Driving and operating If the acoustic signal sounds 3 times continuously when there are no obstacles near the front or rear bumper, there is a fault in the system. Have the cause of the fault remedied by a workshop. Important hints for using the parking assist system 9 Warning Under certain circumstances, various reflective surfaces on objects [...]
-
Page 138
Driving and operating 137 Caution Use of fuel with too low an octane rating could lead to uncontrolled combustion and engine damage. Fuel for ethanol adapted engines (E85) If access to E85 is limited then fuel with a different proportion of ethanol or normal RON 95 can be used for refuelling. The engine's control management system is adjusted [...]
-
Page 139
138 Driving and operating 9 Danger Fuel is flammable and explosive. No smoking. No naked flames or sparks. If you can smell fuel in your vehicle, have the cause of this remedied immediately by a workshop. Caution In case of misfuelling, do not switch on ignition. Fuel filler flap is located at left rear side of vehicle. The fuel filler flap can onl[...]
-
Page 140
Driving and operating 139 General information The official fuel consumption and specific CO 2 emission figures quoted relate to the EU base model with standard equipment. Fuel consumption data and CO 2 emission data are determined according to regulation R (EC) No. 715/2007 (in the version respectively applicable), taking into consideration the veh[...]
-
Page 141
140 Driving and operating When driving downhill, drive in the same gear as if driving uphill and drive at a similar speed. Adjust tyre pressure to the value specified for full load 3 198. Trailer towing Trailer loads The permissible trailer loads are vehicle-dependent and engine- dependent maximum values which must not be exceeded. The actual trail[...]
-
Page 142
Driving and operating 141 Towing equipment Caution When operating without a trailer, remove the coupling ball bar. Towing equipment with detachable coupling ball bar The coupling ball bar is kept in a bag, fastened with a strap and is stowed below the floor cover in the load compartment. Fitting the coupling ball bar Remove sealing plug from the ho[...]
-
Page 143
142 Driving and operating Lock coupling ball bar by turning the supplied key in the lock cylinder of the coupling ball bar. Remove key. Check that the coupling ball bar is correctly attached: ■ Green marking must be visible on lever. ■ Coupling ball bar must be seated firmly in coupling housing. Coupling ball bar must be locked and key must be [...]
-
Page 144
Vehicle care 143 Vehicle care General Information ................... 143 Vehicle checks ........................... 144 Bulb replacement ....................... 151 Electrical system ........................ 157 Vehicle tools .............................. 165 Wheels and tyres ....................... 167 Jump starting .............................[...]
-
Page 145
144 Vehicle care Putting back into operation When the vehicle is to be put back into operation: ■ Connect the clamp to the negative terminal of the vehicle battery. Activate the electronics of the power windows. ■ Check tyre pressure. ■ Fill up the washer fluid reservoir. ■ Check the engine oil level. ■ Check the coolant level. ■ Fit th[...]
-
Page 146
Vehicle care 145 Locate the safety catch, found slightly left of centre on the underside of the bonnet, push the catch upwards and lift the bonnet gently. The bonnet is held open automatically. Air intake 3 115. Closing Lower the bonnet and allow it to drop into the catch. Check that the bonnet is engaged. Engine oil Check the engine oil level manu[...]
-
Page 147
146 Vehicle care We recommend the use of the same grade of engine oil that was used at the last oil change. The engine oil level must not exceed the MAX mark on the dipstick. Caution Overfilled engine oil must be drained or suctioned out. Capacities 3 197, Engine oil quality/ viscosity 3 186. Fit the cap on straight and tighten it. Control indicato[...]
-
Page 148
Vehicle care 147 the coolant concentration checked and have the cause of the coolant loss remedied by a workshop. Engine coolant temperature control indicator W 3 85. Power steering fluid If the fluid level in the reservoir falls below the MIN mark, seek the assistance of a workshop. Washer fluid Fill with clean water mixed with a suitable quantity[...]
-
Page 149
148 Vehicle care The brake fluid level must be between the MIN and MAX marks. When topping up, ensure maximum cleanliness as contamination of the brake fluid can lead to brake system malfunctions. Have the cause of the loss of brake fluid remedied by a workshop. Only use high-performance brake fluid approved for the vehicle. Brake fluid 3 186. Brak[...]
-
Page 150
Vehicle care 149 Retrofitted electrical or electronic accessories can place an additional load on the battery or discharge the battery. Seek the assistance of a workshop regarding technical possibilities, such as fitting a more powerful battery. Ensure the ignition is switched off before reconnecting the battery. Then perform the following actions:[...]
-
Page 151
150 Vehicle care Charging the battery 9 Warning On vehicles with stop-start system, ensure that the charging potential does not exceed 14.6 volts when using a battery charger. Otherwise the battery might be damaged. Jump starting 3 178. Warning label Meaning of symbols: ■ No sparks, naked flames or smoking. ■ Always shield eyes. Explosive gases[...]
-
Page 152
Vehicle care 151 operation 3 times or more while the engine is switched off, to avoid air entering the fuel line. Check diesel fuel filter at shorter intervals if the vehicle is subjected to extreme operating conditions. If there is water in the diesel fuel filter, control indicator N illuminates in the instrument cluster 3 86. Drain the water imme[...]
-
Page 153
152 Vehicle care 1. Switch off the ignition and headlight switch. 2. Open the bonnet, release the 11 retainers and remove the radiator cover. 3. Remove 3 bolts and withdraw headlamp. 4. Depress harness connector tags and disconnect headlamp wiring. 5. Remove the headlamp assembly. Headlamp assembly installation is the reverse of removal - ensure lo[...]
-
Page 154
Vehicle care 153 5. Engage bulb retaining spring and replace headlamp cap. 6. Reinstall headlamp assembly. Front turn signal 1. Remove headlamp assembly 3 151. 2. Rotate bulb holder anticlockwise and withdraw bulb holder from lamp assembly. 3. Press and rotate bulb anticlockwise to remove it from bulb holder. 4. Insert new bulb into bulb holder by [...]
-
Page 155
154 Vehicle care Low and high beam 9 Danger Xenon headlights work under extremely high electrical voltage. Do not touch. Have bulbs replaced by a workshop. Front turn signal 1. Remove headlamp assembly 3 151. 2. Rotate bulb holder anticlockwise and withdraw bulb holder from lamp assembly. 3. Press and rotate bulb anticlockwise to remove it from bul[...]
-
Page 156
Vehicle care 155 1. Remove 2 screws from panel on underside of vehicle below front fog lights and remove panel. 2. Disconnect harness connector from bulb holder and rotate bulb holder anticlockwise. 3. Remove bulb holder from lamp assembly, rotate bulb anticlockwise and remove from bulb holder. 4. Insert new bulb into bulb holder and rotate it cloc[...]
-
Page 157
156 Vehicle care Side turn signal lights 1. Using a suitable screwdriver, pry lamp assembly away from wing. 2. Rotate bulb holder anticlockwise. 3. Remove bulb from lamp assembly by pulling bulb straight out of bulb holder. 4. Insert new bulb into bulb holder by pressing it in and rotating the bulb holder clockwise. 5. Push lamp assembly back into [...]
-
Page 158
Vehicle care 157 Rear reading lights 1. Using a suitable screwdriver, pry lamp lens away from roof lining. 2. Remove bulb. 3. Insert new bulb. 4. Reinstall lamp lens in roof lining. Load compartment light 1. Using a suitable screwdriver, remove lens from lamp assembly. 2. Remove bulb. 3. Insert new bulb. 4. Reinstall lens to lamp assembly. Glovebox[...]
-
Page 159
158 Vehicle care It is advisable to carry a full set of spare fuses. Spare fuses can be stored in the engine compartment fuse box. Fuse extractor A fuse extractor may be located in the engine compartment fuse box. Place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse.[...]
-
Page 160
Vehicle care 159 Engine compartment fuse box The fuse box is located next to the coolant reservoir in the engine compartment. To open, disengage cover and tilt upwards.[...]
-
Page 161
160 Vehicle care[...]
-
Page 162
Vehicle care 161 Fuse Circuit ABS Anti-lock Brake System A/C Climate control, air conditioning system BATT1 Instrument panel fuse box BATT2 Instrument panel fuse box BATT3 Instrument panel fuse box BCM Body Control Module ECM Engine Control Module ECM PWR TRN Engine Control Module, Power‐ train ENG SNSR Engine sensors EPB Electrical parking brake[...]
-
Page 163
162 Vehicle care After changing of defective fuses close the fuse box cover and press until it engages. If the fuse box cover is not closed correctly, malfunctions may occur. Instrument panel fuse box The fuse box is located on the left- hand side of the front passenger seat foot well, or, in right-hand drive vehicles, on the left-hand side of the [...]
-
Page 164
Vehicle care 163[...]
-
Page 165
164 Vehicle care Fuse Circuit AMP Amplifier APO JACK (CONSOLE) Power outlet (centre console) APO JACK (REAR CARGO) Power outlet (load compart‐ ment) AWD/VENT All-wheel drive, ventilation BCM (CTSY) Courtesy lights BCM (DIMMER) Instrument illu‐ mination BCM (INT LIGHT TRLR FOG) Interior lights, trailer fog light BCM (PRK/TRN) Parking lights, tur[...]
-
Page 166
Vehicle care 165 Fuse Circuit RUN 2 Power battery key on run RUN/CRNK Run crank SDM (BATT) Safety Diag‐ nosis Module (Battery) SDM (IGN 1) Safety Diag‐ nosis Module (Ignition) SPARE - S/ROOF Sunroof S/ROOF BATT Sunroof battery SSPS Power steering STR/WHL SW Steering wheel TRLR Trailer TRLR BATT Trailer battery Fuse Circuit XBCM Export Body Cont[...]
-
Page 167
166 Vehicle care The jack and vehicle tools are in a storage compartment below the floor cover in the load compartment. To remove the jack and vehicle tools, open the tailgate. Push both levers on the floor cover towards the handle and pull up the floor cover by the handle. Hang the hook to the upper part of the tailgate opening. Remove wing bolt f[...]
-
Page 168
Vehicle care 167 the floor cover by the handle. Hang the hook to the upper part of the tailgate opening. Caution Do not allow objects to protrude above the top of the rear floor storage compartment, to avoid damage to the storage area and the load compartment floor. Wheels and tyres Tyre condition, wheel condition Drive over edges slowly and at rig[...]
-
Page 169
168 Vehicle care 104 = Load index e.g. 91 is equivalent to 618 kg H = Speed code letter Speed code letter: Q = up to 100 mph S = up to 112 mph T = up to 118 mph H = up to 130 mph V = up to 150 mph W = up to 168 mph Tyre pressure Check the pressure of cold tyres at least every 14 days and before any long journey. Do not forget the spare wheel. This [...]
-
Page 170
Vehicle care 169 pressures are detected. In some versions, the message is displayed in abbreviated form. For example, the following messages can be displayed: A graphic indicating the left rear tyre is shown together with the current tyre pressure; slight pressure deviation. Reduce speed. Check tyre pressure at next opportunity with an appropriate [...]
-
Page 171
170 Vehicle care The legally permissible minimum tread depth (1.6 mm) has been reached when the tread has worn down as far as one of the tread wear indicators (TWI). Their position is indicated by markings on the sidewall. If there is more wear at the front than the rear, swap round front wheels and rear wheels. Ensure that the direction of rotatio[...]
-
Page 172
Vehicle care 171 Tyre chains Tyre chains are only permitted on the front wheels. They must be fitted to the tyres symmetrically in order to achieve a concentric fit. Always use fine mesh chains that add no more than 15 mm to the tyre tread and the inboard sides (including chain lock). 9 Warning Damage may lead to tyre blowout. Tyre chains are permi[...]
-
Page 173
172 Vehicle care Caution Do not allow objects to protrude above the top of the rear floor storage compartment, to avoid damage to the storage area and the load compartment floor. 1. Release the sealant filler hose 1 and the power plug 2 . 2. Unscrew valve cap from defective tyre. Screw the sealant filler hose onto the tyre valve. 3. Connect the pow[...]
-
Page 174
Vehicle care 173 is obtained, switch off the compressor. If the prescribed tyre pressure is not obtained within 10 minutes, remove the tyre repair kit. Move the vehicle one tyre rotation. Reattach the tyre repair kit and continue the filling procedure for 10 minutes. If the prescribed tyre pressure is still not obtained, the tyre is too badly damag[...]
-
Page 175
174 Vehicle care 13. Turn the selector switch clockwise to the air only position. Switch on the compressor to inflate the tyre with air only. Notice The driving characteristic of the repaired tyre is severely affected, therefore have this tyre replaced. If unusual noise is heard or the compressor becomes hot, turn compressor off for at least 30 min[...]
-
Page 176
Vehicle care 175 ■ Do not raise the vehicle more than is necessary to change a wheel. ■ No people or animals may be in the vehicle when it is jacked-up. ■ Never crawl under a jacked-up vehicle. ■ Do not start the engine when it is raised on the jack. ■ Clean wheel nuts and thread before mounting the wheel. 9 Warning Do not grease wheel bo[...]
-
Page 177
176 Vehicle care 5. Attach wheel wrench to eye of threaded rod and rotate wrench clockwise to raise vehicle. If this is not the case, carefully lower the vehicle immediately and reposition the jack. Raise the vehicle until the wheel is just clear of the ground. 6. Unscrew wheel nuts completely and wipe clean with a cloth. Do not grease the threads.[...]
-
Page 178
Vehicle care 177 Front arm position of the lifting platform centrically under the recess of the sill. Spare wheel Temporary spare wheel Some vehicles are equipped with a tyre repair kit instead of a spare wheel. The temporary spare wheel is designed for use on your vehicle only. Use of the temporary spare wheel could affect driveability, particular[...]
-
Page 179
178 Vehicle care The following applies to tyres fitted opposing the rolling direction: ■ Driveability may be affected. Have the defective tyre renewed as soon as possible and have the wheel balanced and fitted to the vehicle. ■ Do not drive faster than 50 mph. ■ Drive particularly carefully on wet and snow-covered road surfaces. 9 Warning Sto[...]
-
Page 180
Vehicle care 179 ■ A discharged battery can already freeze at a temperature of 0 °C. Defrost the frozen battery before connecting jump leads. ■ Wear eye protection and protective clothing when handling a battery. ■ Use a booster battery with the same voltage (12 Volts). Its capacity (Ah) must not be much less than that of the discharged batt[...]
-
Page 181
180 Vehicle care 4. Switch on electrical consumers (e.g. headlights, heated rear window) of the vehicle receiving the jump start. 5. Operate discharged vehicle for approx. 20 minutes to allow for adequate battery recharging. 6. Reverse above sequence exactly when removing leads. Towing Towing the vehicle The towing eye is located under the front bu[...]
-
Page 182
Vehicle care 181 To prevent the entry of exhaust fumes from the towing vehicle, switch on the air recirculation system 3 111 and close the windows. Vehicles with manual transmission and All-wheel drive: If the vehicle is towed with all four wheels on the ground then there are no technical limitations for speed and distance. If only one axle has bee[...]
-
Page 183
182 Vehicle care Appearance care Exterior care Locks The locks are lubricated at the factory using a high quality lock cylinder grease. Use de-icing agent only when absolutely necessary, as this has a degreasing effect and impairs lock function. After using de-icing agent, have the locks regreased by a workshop. Washing The paintwork of your vehicl[...]
-
Page 184
Vehicle care 183 Windows and windscreen wiper blades Use a soft lint-free cloth or chamois leather together with window cleaner and insect remover. When cleaning the rear window, make sure the heating element inside is not damaged. For mechanical removal of ice, use a sharp-edged ice scraper. Press the scraper firmly against the glass so that no di[...]
-
Page 185
184 Vehicle care Rear carrier system Clean the rear carrier system with a steam-jet or high-pressure jet cleaner at least once a year. Operate the rear carrier system once in a while if not in regular use, in particular during winter. Interior care Interior and upholstery Only clean the vehicle interior, including the instrument panel fascia and pa[...]
-
Page 186
Service and maintenance 185 Service and maintenance General information ................... 185 Recommended fluids, lubricants and parts .................................... 186 General information Service information In order to ensure economical and safe vehicle operation and to maintain the value of your vehicle, it is of vital importance that a[...]
-
Page 187
186 Service and maintenance Recommended fluids, lubricants and parts Recommended fluids and lubricants Only use products that meet the recommended specifications. Damage resulting from the use of products not in line with these specifications will not be covered by the warranty. 9 Warning Operating materials are hazardous and could be poisonous. Ha[...]
-
Page 188
Service and maintenance 187 Coolant and antifreeze Use only silicate-free long life coolant (LLC) antifreeze. The system is factory filled with coolant designed for excellent corrosion protection and frost protection down to approx. -28 °C. In northern countries with very low temperatures the factory filled coolant provides frost protection down t[...]
-
Page 189
188 Technical data Technical data Vehicle identification .................. 188 Vehicle data ............................... 190 Vehicle identification Vehicle Identification Number The Vehicle Identification Number is visible through the windscreen. The Vehicle Identification Number is also engraved on the top right-hand side of the bulkhead near [...]
-
Page 190
Technical data 189 Identification plate The identification plate is located on the front left door frame. Information on identification label: 1 = Manufacturer 2 = Type approval number 3 = Vehicle Identification Number 4 = Permissible gross vehicle weight rating in kg 5 = Permissible gross train weight in kg 6 = Maximum permissible front axle load [...]
-
Page 191
190 Technical data Vehicle data Recommended fluids and lubricants European service schedule Required engine oil quality All European countries ( except Belarus, Moldova, Russia, Serbia, Turkey) Only Israel Engine oil quality Petrol engines (including E85) Diesel engines Petrol engines (including E85) Diesel engines dexos 1 – – ✔ – dexos 2 ?[...]
-
Page 192
Technical data 191 International service schedule Required engine oil quality All countries outside Europe except Israel Only Belarus, Moldova, Russia, Serbia, Turkey Engine oil quality Petrol engines (including E85) Diesel engines Petrol engines (including E85) Diesel engines dexos 1 ✔ – – – dexos 2 – ✔ ✔ ✔ In case dexos quality is[...]
-
Page 193
192 Technical data All countries outside Europe except Israel Only Belarus, Moldova, Russia, Serbia, Turkey Engine oil quality Petrol engines (including E85) Diesel engines Petrol engines (including E85) Diesel engines ACEA A3/B3 ✔ – ✔ – ACEA A3/B4 ✔ ✔ ✔ ✔ ACEA C3 ✔ ✔ ✔ ✔ API SM ✔ – ✔ – API SN resource conserving ✔[...]
-
Page 194
Technical data 193 Engine data Sales designation 2.4 3.0 V6 2.2 CDTI 2.2 CDTI Engine identifier code A 24 XF A 30 XF A 22 DM A 22 DMH Number of cylinders 4 6 4 4 Piston displacement [cm 3 ] 2384 2997 2231 2231 Engine power [kW] 123 190 120 135 at rpm 5600 6900 3800 3800 Torque [Nm] 217 287 350 400 at rpm 4500 5400 2000 2000 Fuel type Petrol Petrol [...]
-
Page 195
194 Technical data Performance All-wheel drive Engine A 24 XF A 30 XF A 22 DM A 22 DMH Maximum speed 3) [mph] Manual transmission 115 – 116 124 Automatic transmission 109 123 113 119 Front-wheel drive Engine A 24 XF A 30 XF A 22 DM A 22 DMH Maximum speed 3) [mph] Manual transmission 118 – 117 – Automatic transmission – – 114 – 3) The ma[...]
-
Page 196
Technical data 195 Vehicle weight Kerb weight, basic model without any optional equipment Manual transmission / Automatic transmission. Engine All-wheel drive Front-wheel drive A 24 XF 1825-1885 / 1845-1905 1750-1810 / - A 30 XF - / 1875-1935 - / - A 22 DM 1911-1971 / 1936-1996 1836-1896 / 1861-1921 A 22 DMH 1911-1971 / 1936-1996 - / - Vehicle dime[...]
-
Page 197
196 Technical data Turning circle diameter, wall to wall [m] 12.78 Turning circle diameter, kerb to kerb [m] 11.87 Maximum wading depth [mm] (at 3 mph) 450 Approach angle 20° Ramp angle 18° Departure angle 24°[...]
-
Page 198
Technical data 197 Capacities Engine oil Engine A 24 XF A 30 XF A 22 DM A 22 DMH including filter [l] 4.7 5.7 5.6 5.6 between MIN and MAX [l] 1.0 1.0 1.0 1.0 Fuel tank Petrol/diesel, nominal capacity [l] 65[...]
-
Page 199
198 Technical data Tyre pressures Up to full load Up to full load ECO Trailer towing Engine Tyres front rear front rear front rear [ kPa/bar] ([psi]) [ kPa/bar] ([psi]) [ kPa/bar] ([psi]) [ kPa/bar] ([psi]) [ kPa/bar] ([psi]) [ kPa/bar] ([psi]) All 215/70 R 16 4) , 235/60 R 17, 235/65 R 17, 235/55 R 18, 235/50 R 19 240/2.4 (35) 240/2.4 (35) 260/2.6[...]
-
Page 200
Technical data 199 Towing hitch installation dimensions Dimension mm A 412 B 505 C 482 D 734 E 1039 F (fully laden) 363 G (at kerb weight) 481[...]
-
Page 201
200 Technical data[...]
-
Page 202
Customer information 201 Customer information Vehicle data recording and privacy ....................................... 201 Vehicle data recording and privacy Event data recorders The vehicle has a number of sophisticated systems that monitor and control several vehicle data. Some data may be stored during regular operation to facilitate repair of[...]
-
Page 203
202 Customer information In addition, the manufacturer may use the collected or received diagnostic data: ■ for the manufacturer's research needs ■ to make it available for research needs where appropriate confidentiality is maintained and need is shown ■ to share summary data which is not tied to a specific vehicle with other organisati[...]
-
Page 204
Customer information 203[...]
-
Page 205
204 Index A Accessories and vehicle modifications .......................... 143 Accessory sockets ........................ 75 Active head restraints ................... 33 Adjustable air vents ................... 114 Airbag and belt tensioners ........... 81 Airbag deactivation ...................... 45 Airbag system ..............................[...]
-
Page 206
205 Change engine oil ....................... 86 Changing tyre and wheel size ... 170 Charging system .......................... 81 Check control................................ 96 Child locks ................................... 21 Child restraint installation locations ................................... 48 Child restraint systems ................[...]
-
Page 207
206 Glovebox ..................................... 52 Graphic-Info-Display, Colour- Info-Display .............................. 91 H Halogen headlights .................... 152 Hand brake ................................. 129 Hazard warning flashers ............ 104 Headlight flash ........................... 103 Headlight range adjustment ...... 1[...]
-
Page 208
207 Performance .............................. 194 Performing work ........................ 144 Pollen filter ................................. 115 Power outlets ............................... 75 Power seat adjustment ................ 36 Power steering ............................. 84 Power steering fluid ................... 147 Power windows ....[...]
-
Page 209
208 Tyre changing ............................. 174 Tyre designations ...................... 167 Tyre pressure ...................... 96, 168 Tyre pressure monitoring system ............................... 96, 168 Tyre pressures ........................... 198 Tyre repair kit ............................. 171 Tyres .................................[...]