AirLive POE-5010HD manuale d’uso

Use r ’ s Manual POE 5 Mega-Pixel Box Type IP Camera with ICR POE-5010HD[...]

Copyright and Disclaimer AirLive POE-5010HD User ’s Manual Copyright & Disclaimer No part of this publication may be reproduc ed in any form or by any means, whether electronic, mechanical, photocopying, or record ing without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ens ure the accuracy of the informati[...]

T able of Contents i AirLive POE-5010HD User’s Manual Table of Contents 1. Overview .....................................................................................................1 1.1 Introduction ..........................................................................................1 1.2 Features .......................................[...]

T able of Contents AirLive POE-5010HD User ’s Manual ii 5.4 Security ..............................................................................................35 5.4.1 Acc ount ...................................................................................................... 36 5.4.2 HTTP S ................................................[...]

1. Overview AirLive POE-5010HD User ’s Manual 1 1 1. Overview This user’s guide explains how to operate this camera from a computer. User should r ead this manual completely and carefully before you operate the device. 1.1 Introduction Thank you for purchasing the PoE H.264/MPEG 4/MJPEG Full High Definition Mega Pixel Network Camera, a standalo[...]

1. Overview AirLive POE-5010HD User ’s Manual 2 1.2 Features  Easy installation with setup wizard  UPnP device discovery and NA T router transversal for easy installation  Dynamic IP Service, DIPS®, to se arch your IP camera from Internet easily  0.5Lux Minimum Illumination at F1.2  DC IRIS and IR-CUT Removable(ICR)  H.264 High[...]

1. Overview AirLive POE-5010HD User ’s Manual 3 1.3 Minimum System Requirement s  Microsoft Internet Ex plorer 6.0 or later  Microsoft Media Player 1 1.0 or later (to playback recorded file)  VGA Monitor resolution 1280 x 1024 or higher  Pentium-4 2.0 GHz or higher  Memory Size: 512MB or more  Windows XP, Vista,7  Microsoft®[...]

2. Package Content s AirLive POE-5010HD User ’s Manual 4 2 2. Package Content s User can find the following items in the package as below: Item Descriptions 1. This Unit is the main element of the product. And Camera Mount Kit and pads Note: The lens is optional . For further information about the lens, please check with your installer . 2. Power[...]

2. Package Content s AirLive POE-5010HD User ’s Manual 5 Note: 1.) Using a power supply with a differ ent voltage than the one included with the Network Camera will cause damage and void the warranty for this product. 2.) This product does not come with l ens. It must be purchased separately . 2.1 Connections Front / T op / Side Panel 1. DC-iris [...]

2. Package Content s AirLive POE-5010HD User ’s Manual 6 Note: Restoring the factory default setting will lose the all previous settings included IP address forever. User needs to run the IPWiza rd II program to search the device and configure it to let the dev ice work properly again. 3. Internal Microphone: It allows the camera to receive sound[...]

2. Package Content s AirLive POE-5010HD User ’s Manual 7 2. GPIO/RS-485: Connect to a local keyboard controller.  DI/ DO: Connect to sensor in and alarm out devices Cable for I/O connectors: PIN SPECIFICA TION 1 Ground (Common) GND 2 GPIO Out #1 Close circuit current maximum: 70mA AC or 100mA Output resistance: 30 ohm Open circuit voltage maxi[...]

2. Package Content s AirLive POE-5010HD User ’s Manual 8 2.2 Connections Mounting the Camera 1. Attaching the Wall Mount Kit The W all Mount Kit that is provided in t he package has a swivel ball screw head, so that can you can attach it to the screw hole on the camera’ s top (or bottom) panel. After att aching the camera to the W all M ount Ki[...]

2. Package Content s AirLive POE-5010HD User ’s Manual 9 3. Connect the external power supply to Camera Connect the attached power adapter to the DC power jack of the camera. Note : Use the power adapter, 12V DC, included in the package and connect it to wall outlet for AC power. Once you have installed the camera we ll and powered it on, t he po[...]

2. Package Content s AirLive POE-5010HD User ’s Manual 10 When you use a DC-Iris lens on your camera , you can adjust the brightness of the video image through the Iris Level screw-know on the back panel of the camera.  Adjusting the Focus Y ou can use the provided L-type wrench to adjust the lens focus.[...]

2. Package Content s AirLive POE-5010HD User ’s Manual 11 5. Applications of the Camera The camera can be applied in multiple applications, including: z Monitor local and remote places and objects via Internet or Intranet. z Capture still images and video clips remotely . z Upload images or send email messages with the still images attached. The [...]

3. Preparation AirLive POE-5010HD User ’s Manual 12 3.1 Search and Set up by IPWizard II When you installed the Camera on a LAN envi ronment, you have two easy ways to search your Cameras by IPWizard II or UPnP™ discover y . Here is the way to execute IPWizard II to discover Camera’ s IP address and se t up related p arameter in a Camera. Sea[...]

3. Preparation AirLive POE-5010HD User ’s Manual 13 LAN In case you want to change the IP related para meters of wired interfac e, please select the device you want to c onfigure and click the LAN button. Relative settings will be carried out as below . Y ou could modify the relative setti ngs of the selected device. Click “ << ” button[...]

3. Preparation AirLive POE-5010HD User ’s Manual 14 In case, you do not want to change usernam e and/or password, then just cl ick “ Submit ” button to perform your setting accordingly . Click “ << ” button will go back to previous page. If you like to change username and/or password of the device, just click the check button. Then,[...]

3. Preparation AirLive POE-5010HD User ’s Manual 15 Wireless This model does not support wireless function. Ther efore, IPWizard II disables this function automatically . 3.2 Using UPnP of Windows® XP or Vist a UPnP™ is short for Universal Plug and Play, which is a net working architecture that provides compatibilit y among networking equipmen[...]

3. Preparation AirLive POE-5010HD User ’s Manual 16 3.3 Inst all the Device behind a NA T Router Once installed, the device is accessible on your LAN. T o access the device from the Internet you must configure your broadband router to allow incoming data traffic to the device. If the device is installed on the LAN with a router , then it may get [...]

3. Preparation AirLive POE-5010HD User ’s Manual 17 3.4 Access the device from the Internet Explorer for the first time 1. S tart the web browser on the computer and type the IP address of the Network Camera you want to monitor as below: The Login Window of the Camera is prompted: 2. Type in your login name and passw ord under “USERNAME” and [...]

3. Preparation AirLive POE-5010HD User ’s Manual 18 4. After the ActiveX control was install ed and ran, the first im age will be displayed. Logging in as an User If you log in the Camera as an ordinary User , “Setting” function wi ll be not accessible. Logging in as an Administrator If you log in the Network Camera as the Ad ministrator , yo[...]

4. Operating the Network Camera AirLive POE-5010HD User ’s Manual 19 S tart-up screen will be as follow no matter an ordinary users or an administrator . Monitor Image Section The image shot by the Network Camera is s hown here. The date and time are displayed at the top of the window. Video Profile Select to transmit and record the video us ing [...]

4. Operating the Network Camera AirLive POE-5010HD User ’s Manual 20 Function Buttons You can use the function buttons above the win dow to control the camera’s audio, video, and zoom functions. z : Click to display the live vi ew image of the camera. z : Click to stop playing the live view image. z : Click to capture and save a still image. z [...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 21 System Setting This function is only available for user logged into Network Camera as administrator . Y ou can access and manage the camera through the Web browser . This chapter describes the Web Configuration, and guides you through t he configuration of the camera by using the W[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 22 Status The S tatus menu provides t he current status of the camera, including the basic informa tion, audio/video settings, networking configurat ion, and system logs. 5.1 System Setting: Configure and maint ain system 5.1.1 Device Settings Use this menu to perform the prin cipal s[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 23 Date and T ime: Enter the correc t date and time for the sy stem. - Time Zone: Select the proper time zone for the region from the pull-down menu. - DayLight Saving: Select this option if the Daylig ht Saving T ime is used in your location. Daylight Saving means a period from late [...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 24 Factory Reset: Click Reset to restore all factory def ault settings for the camera. Reboot: Click Reboot to restart the camera just like turning the device off and on. The camera configuration will be retained af ter rebooting. Configuration: Y ou can save your camera configuratio [...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 25 5.2.1 General DHCP / St atic IP: This field allows you to select the IP addr ess mode and set up the related configuration. The avail options include: DHCP IPv4 , DHCP IPv4/IPv6 , and St atic IPv4/IPv6 . - DHCP IPv4: Select this option when your netwo rk uses the DHCP server . When[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 26 Default Gateway Enter the Default Gateway of the camera. The default setting is 192.168.1.254 Primary/ Secondary DNS DNS (Domain Name System) tran slates domain names into IP addresses. Enter the Pr imary DNS and Secondary DNS that are provided by ISP . HTTP Port The default HTTP p[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 27 NOTE Once the camera get an IP address from the ISP as starting up, it automatically sends a notification email to you. Theref ore, when you select PPPoE as your connecting type, you have to set up the em ail or DDNS configuration in advance. Enable DDNS: Select this option to enab[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 28 Bonjour: The devices with Bonjour will automatic ally broadcast their own services and listen for services being offered for the use of others. Select the Enable Discovery option and, if your browser with Bonjour , you can fi nd the camera on your local network without knowing its [...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 29 The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera. Select the Enable Filter option and assign the range of IP addresses that are a llowed to access the camera in the Accept IP Address field; o[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 30 SMTP Notification (e-mail): If enable this function, then the “ Send to “ and “ Subject ” fields need to be filled. Send To: T ype the receiver ’s e-mail address. Th is address is used for reply mail. Subject: T ype the subject/title of the E-mail. TCP Notification: If en[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 31 5.3 Audio/V ideo/Image The Audio/Video/Image menu contains three sub-menus to provide the video and audio settings for the camera. When completed, click Apply to save the settings. 5.3.1 Video High Resolution: Select this option to enable the camera to capture images in high resolu[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 32 NOTE When High Resolution is disabled, you can only set the Video Resolution as 1280x720 (720P) , 720x480 (D1) , 640x480 (VGA) , 320x240 (QVGA) , or 176x144 (QCIF) . - Rate Control: Set the proper image qual ity by selecting Video Quality or Bitrate , and then select the desired se[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 33 5.3.3 Image Brightness: Adjust the brightnes s level from 0~255. Contrast: Adjust the contrast level from 0~255. Saturation: Adjust the colors level from 0~255. Sharpness: Adjust the sharpness level from 0 ~ 100. TIP Click Default to restore the default settings of the three option[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 34 Overlay Setting: This option is used to set the im age overlay and mask feature of the camera. - Enable Time St amp: Select this option to display the date & time information on the live view image. - Enable T ext Display: Select this option and enter your heading text in the b[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 35 5.3.4 ROI ROI means Region of Interest. When the main stream is set to High Resolution, user can select specified region for monitoring, for th is will saving the bandwidth if there are too many collision on the network. 5.4 Security The Security menu provides the required options [...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 36 5.4.1 Account Admin T o prevent unauthorized access to the camera’s W eb Configuration, you are strongly recommend to change the default administrat or password. T ype the administ rator password twice and then click Modify to set and confirm the p assword. Users - User Nam e/Pas[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 37 Guest - User Nam e/Password/Confirm Passw ord: Enter the user ’s name you want to add to use the camera. Then, enter the p assw ord twice for the new user . When done, click Add to add the new user for the camera. - UserList: Display the existing guests of the came ra. T o delete[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 38 5.5.1 Event Event Att achment: Select One Snap shot to send the alert message with one still image captured by the camera, or select H264 V ideo to send the alert message with one video clip recorded by the camera. Y ou can set the attachment that is captured in Pre Event or Post E[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 39 - T est FTP: When done, click the button to test the FTP server . NOTE Due to the network environment, the came ra may not upload number of images that you set. SMTP Event Server: Select Enable to enable the SMTP server for the camera. - SMTP Mail Server: Enter the mail server addr[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 40 TCP Server: Select Enable to enable the TCP server for the camera. - TCP Server Address: Enter the IP address of the TCP server . - TCP Port: Set port number of TCP server NOTE Due to the network environment, the came ra may not upload number of images that you set. HTTP Event Serv[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 41 Follow the steps below to set up t he Event Schedule for the camera: 6. Select Enable and enter the Event Name . 7. tection , Digit al Input 1 , or Digit al Input 2 . 8. S - AIL: The camera will send the attachment to the assigned receiver when - The camera will transfer the atta c[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 42 - ered. Please note ation functi on, is connected to the camera. n on the 9. W vent profile will be added to the Event list. IP T o change/remove the event profile, select the desired profile from the Event list and te . - Enable HTTP: The camera will send instant message to the HT[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 43 to enable of th e camera. The camera provides three detecting areas. l n for the camera: move the detecting area and change the area coverage. 3. Set the Percent age and Sensitivity (1~99) for detecting motion to record video. Apply to save the settings and activate the motion dete[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 44 - Maxim uploaded e date & time information on the attachment. z Recording Schedule: Select Always to enable recording continuously , or select From and then set the day and time to record. When done, click Apply to save the settings. 5.5.5 RS-485 um Size of Each File: This opti[...]

5. Administrating the Device AirLive POE-5010HD User ’s Manual 45 S-485 nually . hen you select this option, you need to complete the required settings of Port Setting . est each command that you have assigned. In the Extended Command 1~5 string boxes, you can customize more buttons and settings for your needs. Use Pelco-D: Select this option and[...]

Appendix A: Alarm I/O Connector AirLive POE-5010HD User ’s Manual 46 Appendix A: Alarm I/O Connector Some features of the Camera c an be activated by the external sensor that senses physical changes in the area Camera is monitoring. These changes can include intrusion detection or certain physical change in the monitored ar ea. For examples, the [...]

Appendix A: Alarm I/O Connector AirLive POE-5010HD User ’s Manual 47 Explanation of External I/O Circuit Diagram: CAUTION! • THE LOW VOLTAGE/CURRENT CIRC UITS AND HIGH VOLTAGE/ CURRENT CIRCUITS ARE IN THE NETWORK C AMERA CIRCUIT. TH E QUALIFIED ELECTRICIAN SHOULD DO THE WIRING NOT BY YOURSELF. I NCORRECT WIRING COULD DA MAGE NWTWORK CA MERA. YO[...]

Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 48 Appendix B: Frequently Asked Questions Question Answer or Resolution Features The video and audio codec is adopted in the device. The device utilizes H.264, MPEG4 and JPEG triple compression to providing high quality images. Where H.264 and MPEG4 are standards for video c[...]

Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 49 2. Reconfigure the device. Forgot the IP address of the device. Check IP address of device by usi ng the IPWizard II program or by UPnP discovery. IPWizard II program cannot find the device. • Re-power the device if cannot find the unit within 1 minutes. • Do not conn[...]

Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 50 The IP address and Subnet Mask of the PC and Network Camera must be in the same class of the private IP address on the LAN. • Make sure the http port used by the Network Camera, default=80, is forward to the Network Camera’s private IP address. • The port number ass[...]

Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 51 security settings prohibit downloading ActiveX controls”. The device work locally but not externally. • Might be caused from the firewall protection. Check the Internet firewall with your system or network administrator. The firewall may need to have some settings cha[...]

Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 52 Camera is bad. the lens can degrade the image quality. The color of the image is poor or strange. • Adjust White Balance. • To insure the images you are viewing are the best they can be, set the Display property setting (color quality) to 16bit at least and 24 bit or [...]

Appendix C: PING IP Addre ss AirLive POE-5010HD User ’s Manual 53 Appendix C: PING IP Address The PING (stands for Packet Internet Gr oper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confir m Network Camera install ed [...]

Appendix D: Bandwid th Estimation AirLive POE-5010HD User ’s Manual 54 Appendix D: Bandwid th Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, c odec type, and quality setti ng of server. Here is a guideline to help you roughly estimate the bandwidth requir[...]

Appendix E: S pecifications AirLive POE-5010HD User ’s Manual 55 Appendix E: S pecifications Camera Image Device 5 Mega-pixel image sensor Effective Pixels 2592 x 1944 pixels Sensitivity 0.5V/lux-sec (550nm) Signal to Noise 44dB Lens F:1.2 ; f:4mm, C/CS mount (optional) IRIS Control DC IRIS IP Module Video Video Encoder H.264, MPEG4 and Motion JP[...]

Appendix E: S pecifications AirLive POE-5010HD User ’s Manual 56 Motion Detection 3-zone video motion detection Alarm Events Events Triggered by Motion Detection or GPIO or According to Schedule Image Upload/Send Over Email and FTP Store Image File to SD Card Recording Video File to Network Storage and SD Card General RAM 128MB ROM 32MB Power Sup[...]

Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 57 Appendix F: Configure Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP address needs to be setup as fixed IP address, also the port forwarding or Virtual Server function of router needs to be se[...]

Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 58 Y our W AN IP Addre ss will be listed here. Note: Because a dynamic W AN IP can change from time to time depending on your ISP , you may want to obtain a S tatic IP address from your ISP . A S tatic IP address is a fixed IP address that will not change over ti me [...]

Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 59 Follow these steps to configure your router ’s V irtual Server settings • Click Enabled . • Enter a unique name for each entry. • Select Both under Protocol Type ( TCP and UDP ) • Enter your camera’s local IP Address (e.g., 192.168.1.100 , for example)[...]

Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 60 Enter valid ports in the V irtual Server section of your router . Please make sure to check the box on this line to enable settings. Then the devic e can be access from W AN by the router ’s W AN IP Address. By now , you have finished your entire PC configuratio[...]

Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 61 Appendix G: DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP Service. Get your own domain like w ww.yourname.com, www.yourname.com.tw etc. (Note: This dom ain must be registered with Internic via re[...]

Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 62 3. Application S tep s—DDNS & Domain Name (1). V isit the following web site: http://www .dyndns.org/ (2). Click “ Account ” (3). After the columns show up at the left side, click “ Cre ate Account”[...]

Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 63 (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input informa tion and finish creating an account Click these two options[...]

Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 64 (5). Check your e-mail mailbox. There wil l be an e-mail with a title “Y our DynDNS Account Information“. Click the hyperlink addr ess to confirm the DDNS service that you just applied. Then DDNS you applied activated. Click to confirm (6). Enter the web page http://www .dyndns[...]

Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 65 Input your account (7). If the correct username and passw ord are input, you can see the following picture at the top -right of the login page. ( 8 ) . C l i c k t h e “ Services”. ( 9 ) . C l i c k t h e “ Dynamic DNS ”.[...]

Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 66 (10). Click the “ Get S tarted ”. (1 1). We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is easy to remember . ( P i n k N o . 2 ) T h e 3 rd step is to click “Offl ine Hostname” from Servi[...]

Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 67 4. Setup the DDNS and PPPoE of Networked Device At last, users have to enter the web p age of Networked Device and setup the necessary information of DDNS and PPPoE after the applicat ion of DDNS service. Please check the user manual to access the DDNS and PPPoE pages. After saving[...]

Appendix H: Power Line Frequ ency AirLive POE-5010HD User ’s Manual 68 Appendix H: Power Line Frequency COUNTR Y VOL T AGE FREQUENCY COMMENTS Argentina 220V 50 Hz *Neutral and line wires are reversed from that used in Australia and elsewhere. Australia 230V* 50 Hz *Outlets typically controlled by adjacent switch. Though nominal voltage has been o[...]

Appendix I: 3GPP AirLive POE-5010HD User ’s Manual 69 Appendix I: 3GPP To use the 3GPP function, in add ition to previous section, you might need more information or configuration to make this function work. Note that to use the 3GPP function, it strongly recommends to install the Networked Device with a public and fixed IP address without any fi[...]

Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 70 Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operati ng system of PC is running Windows XP . Go to St art > Settings , and then click Control Panel Click Add or Remove Programs[...]

Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 71 Click Add/Remove Windows Components The following screen will appear: Select Networking Services , and then click Details[...]

Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 72 Select Universal Plug and Play , and then click OK Click Next[...]

Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 73 Please wait while Setup configures the components. Click Finish[...]