Baumatic B27SS manuale d’uso

1 B27SS 90 cm touch control ceramic hob[...]

User Manual for your Baumatic B27SS 90 cm 4 hyperspeed zone touch control ceramic hob. NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available fo r future reference; for[...]

3 Contents Environmental note 4 Important safety information 5 – 8 S p e c i f i c a t i o n s 8 – 10 C e r a m i c h o b s u r f a c e l a y o u t 1 0 Control panel lay out 10 U s i n g t h e c e r a m i c h o b 11 - 20 Before first use 11 T o u c h c o n t r o l s 1 1 S w i t c h i n g t h e h o b o n 1 1 Switching on a zone and setting a pow[...]

Environmental note 4 o The packaging materials that Baum atic uses are environmentally friendly and can be recycled. all packaging mate rial with due regard for the environment. o Please discard[...]

5 Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If yo are unsure of any of the info rmation contained in t u his ooklet, please contact the Baumatic Advice Line. old use and for in ient temperature of the n [...]

6 hild Safety d ny time. During and after use, all surfaces will become hot. se ensure that they are kept under close supervision at all times. ld only be allowed to utilise the appliance when supervised. eneral Safety C o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowe to tou[...]

7 leaning Cleaning of the hob should be carried out on a regular basis. should be disconnected from the mains and allowed to cool. using this appliance and when following the cleaning procedure. high pressure cleaning equipment to clean the appliance. ection of this booklet that refers to stallation. esult of improper use or installation of this ap[...]

o Pans should be lifted on an d off the hob surface and not dragged. o Cooking zones should not be sw itched on without cookware placed on it. Also the cookware should not be empty. Specifications Product dimensions: Aperture dimensions: Height: 350 mm Height: 335 mm Width: 880 mm Width: 865 mm Depth: 40 mm Product specifications: o 1 x 0.75/2.20 k[...]

9 Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 30 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inputs: 6.3 kW Mains Supply Lead: 3 core x 6 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found [...]

Ceramic hob surface layout A = 1.20 kW hyperspeed zone Ø 140 mm B = 0.75/2.20 kW double hyperspeed zone Ø 120/210 mm C = 0.70/1.70 kW double hyperspeed zone Ø 120/180 mm D = Control panel Control panel layout 1. ON/OFF button 2. Safety lock button 3. Safety lock neon 4. Plus button 5. Minus button 6. Cooking zone indicator 7. Decimal point symbo[...]

Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance” section). o You should switch on one cookin g zone at a time, for 5 minutes at the maximum setting. This will help to eliminate any new smell that exists and evaporate any humidity that has formed on the heating elements du[...]

Switching on a zone and setting a power level IMPORTANT: A zone must be selected within 10 seconds of switching the hob on. o Press the plus (4) button for the zone that you want to use. o Adjust the zone between power levels 1 and 9, using the plus (4) and minus (5) buttons. By holding down either of these buttons, the value on the zone indicator [...]

o Adjust one of the dual circuit zones between power levels 1 and 9 using the plus (5) and minus (4) buttons. o The central section of the dual circuit zone will switch on. o If you wish to also activate th e outer section of a dual circuit zone, you should press the relevant dual circuit ON/OFF button (8) . The dual circuit indicator neon (9) will[...]

Switching off a zone instantly o Press the minus button (5) and the plus button (4) simultaneously. o The zone will switch off immediately. o An “H” will show in the cooking zone indicator (6) , alternating with “0”. (See the section on th e “residual heat indicator” on page 15). Switching the hob off Once you have switched off all of t[...]

Residual heat indicator o After a zone is switched off, the corresponding cooking zone indicator (6) will show the letter “H”, alternating with “0”. This means that the temperature of the zone is over 60°C and is therefore high enough to cause injury. o If you switch off the applia nce using the ON/OFF button (1) then only the “H” will[...]

Safety cut-off o If one or more of the cookin g zones are accidentally left on, a safety cut off will activate after a certain period of time. The length of time depends on the po wer level that a zone or zones have been set on. LEVEL TIME LIMIT 1 10 hours 2 – 3 5 hours 4 4 hours 5 3 hours 6 – 8 2 hours 9 1 hour o If the safety cut off has acti[...]

17 o Press the minus button (5) once and power levels 9 appears on the cooking zone indicator (6) and then release the minus button. o Press the plus button (4) once and a flashing decimal point symbol will appear on the cooking zone indicator (6) , and then release the plus button. o Use the minus button (5) to adjust the zone to the power level t[...]

Increasing the power level during automatic pre-he ating o If a zone is already within automatic pre-heating mode and you wish to increase the power level, you should press the plus button (4) . o The pre-heating time will be adjusted. It will take into account the amount of time that has already elapsed. Switching off automatic pre-heating o If a [...]

The hob timer o Touch the timer plus (10) and minus (11) buttons simultaneously. A “t” symbol will appear on all of the cooking zone indicators. o After selecting the timer, a zone must be selected within 10 seconds by pressing one of the plus (4) or minus (5) buttons. You should use these buttons to select your desired power level. o The zone [...]

20 o If you wish to cancel the timer setting before it reaches the end of the countdown period, press the plus (10) and minus (11) buttons of the timer simultaneously. o IMPORTANT: If you cancel the timer setting, the selected zone will still remain on, therefore you will need to switch the zone off manually. Hob guidelines o The first few times th[...]

o Food or liquid that has high sugar content may damage the hob top if it comes into contact with the ceramic hob surface. Any spillages should be wiped up immediately, however this may not prevent the hob surface fr om becoming damaged. o IMPORTANT: The ceramic hob surface is tough; however it is not unbreakable and can be damaged. Especially if p[...]

Cleaning table Type of deposit Remove Immediately? Remove when the appliance has cooled down? What should I use to remove the deposit? Sugar or food/liquid containing sugar Yes No Ceramic hob scraper Tin foil or plastic Yes No Ceramic hob scraper Fat splashes No Yes Ceramic hob cleaner Metallic discolouration No Yes Ceramic hob cleaner Water splash[...]

o You should follow the instructions given by the manufacturer of the specialist ceramic hob cleaner. You should ensure that it is suitable for use on your appliance. Installation The installation must be carried out by a suitably qualified person, in acco rdance with the current version of the following. o UK Regulations and Safety Standards or th[...]

Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging: 1 Baumatic hob 1 Ceramic hob scraper 1 Installation and instruction manual 1 Baumatic guarantee card 4 Fixing brackets 4 Fixing screws 4 Spring clips 1 Sealing strip Installing the appliance o Cut a hole in the worktop that[...]

o Carefully turn the hob upside do wn and place it on a cushioned mat. o Apply the sealing strip provided around the edge of the appliance. o The protective covering must be removed from both sides. o Do not leave a gap in the sealing agent or overlap the thickness. o IMPORTANT: Do not use a silicon sealan t to seal the appliance against the apertu[...]

o On the underneath of the hob, locate the fixing brackets (B) and turn them so that they locate on the underneath of the worktop and the hob. o Fully tighten the screws (C) to secure the hob into position. Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations an[...]

Connecting the mains supply cable o The mains terminal block is located on the underside of the hob and the terminals are accessible by removing the terminal block cover by removing the cover screw. o The cable connections must be in accordance with the diagram located on the bottom of the hob. o The brass links must be positioned as marked in the [...]

o IMPORTANT: The appliance must NOT be connected to the mains supply by means of a 13A plug and socket. o The cable can be looped if necessary, but make sure that is not kinked or trapped when the hob is in position. Care must be taken to avoid the cable being in contact with hot parts of the appliance. Replacing the mains supply cable If the mains[...]

29 My appliance isn’t working correctly o The cooking zones are not functio ning or will not switch on. * It has been more than 10 seconds since the appliance was switched on. You should switch the appliance on again, using the ON/OFF button. * The safety lock has been switch ed on (see the “Locking the hob top” section for information on ho [...]

IMPORTANT: If your appliance appears not to be operating correctly, then yo u should disconnect it from your mains supply and then contact the Customer Care Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and fin[...]

United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 4372 44 Advice Line Telephone (0118) 933 6933 E-mail: sales@baumatic.co.u k customerca[...]

32[...]