Bosch Appliances ICP-CC488 manuale d’uso

EN Installation Guide ICP-CC488 Control Panel ICP-CC488[...]

ICP-CC488 | Installation Guide | Notices EN | 2 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Copyright Notice Unless otherwise indi cated, this publica tion is the copyright of Bosch Security Systems, Inc. (“ Bosch ”). All rights are reserved. You may download a single copy of this publication. By downloading the publication you agree [...]

ICP-CC488 | Installation Gui de | Contents EN | 3 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Contents 1.0 Introduction ........... .......... ........... .......... ........... .8 1.1 ICP-CC488 Features ........ ............ ......... ......... .8 1.2 Quick Start ............. .......... ......... ......... ............ ...9 1.2.1 Set th[...]

ICP-CC488 | Installation Gui de | Contents EN | 4 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 7.4.9 Command 999 – Display the Panel Type or Software Version Number .................. ......... 39 7.5 Disable Factory Defaults ....... ......... ......... ..... 39 8.0 Alarm Link Software .................... ......... ....... 40 8.1 Remote[...]

ICP-CC488 | Installation Gui de | Contents EN | 5 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 15.27 System Status Reporting Options ........ ....... 69 15.28 Test Reporting Time ............... ......... .......... .. 69 15.29 Test Reporting Dialer Options .............. ..... 70 16.0 Programmable Outputs................ ......... .......[...]

ICP-CC488 | Installation Gui de | Contents EN | 6 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 24.4 New Zealand Telepermit Notes........... ..... 100 24.5 A-Tick................... ............ ......... ............ ....... 101 25.0 Programming Sheets ............... ............ ....... 101 25.1 ICP-CC488 Programming Sheets ........ ....[...]

ICP-CC488 | Installation Gui de | Contents EN | 7 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 40: Ex ample Rep orting in 4 + 2 Form at ... 44 Table 41: 4 + 2 Reporting Format............ ............ . 44 Table 42: 4 + 2 Tran smission Code Descr iptions45 Table 43: Point ID Codes ............ ............ ......... ...... 46 Table 4[...]

ICP-CC488 | Install ation Gu ide | 1.0 Introdu ction EN | 8 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 1 .0 Int roduct ion Congratulations on sele cting the ICP-CC488 Co ntrol Panel for your installat ion. Take the time to re ad through this guide and fam iliarize yourse lf with the outstanding operating and installation features of this[...]

ICP-CC488 | Install ation Gu ide | 1.0 Introdu ction EN | 9 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 1.2 Quick Start The following steps allow you to use the ICP-CC 488 Control Panel with factory default values. The defau lt values allow the control panel to communicate in the Contact ID format. If you are not familiar with programming[...]

ICP-CC488 | Install ation Guide | 2.0 Codepad Indicat ors EN | 10 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 1.2.3 Zone Types There are thirteen zone types to cho ose from when programming zones for the ICP-CC488 Co ntrol Panel. Refer to Section 14.3 Zone Programming for more information. Table 2: Zone Types Type Descri ption Type Descri[...]

ICP-CC488 | Install ation Guide | 2.0 Codepad Indicat ors EN | 11 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 MAINS Indicator The MAINS indicator display s whether the system’s AC MAINS supply is normal or fa iled. When programming in Installer’s Programming Mode or using a Master Code function, the MAINS indicator lights to indicate [...]

ICP-CC488 | Install ation Guide | 2.0 Codepad Indicat ors EN | 12 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 • Section 3.5 to arm the system in STAY Mode 2. • Section 5 .1.5 to use the Installer Code to set zones to be automatically isolated in STAY Mo de 2. • Section 5 .2.6 to use the Master Code to set zone s to be automatically [...]

ICP-CC488 | Install ation Guide | 2.0 Codepad Indicat ors EN | 13 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 10: Area On/Off Indicators Indicator Definition On The area is armed in AWAY Mode or STAY Mode 1. Off The area is disarmed. Area Display Indicato rs The group of four Area Display ind icators show s the area to which the eig[...]

ICP-CC488 | Installation Guid e | 3.0 System Operations EN | 14 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 3.0 Syst em Operat ions This section e xplains the ge neral operatio ns of the system: arming and disarming the system in the three modes, isolating zones, in itiating codepad alarms, and determining a fault. 3.1 Arming the System i[...]

ICP-CC488 | Installation Guid e | 3.0 System Operations EN | 15 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 To arm the system in ST AY Mode 1 (method one): 1. Enter your code and press [STAY]. 2. Two beeps sound and the STAY indicator is lit. Exit Time starts. The indicators for any zones that are programmed to be automatically isolated i[...]

ICP-CC488 | Installation Guid e | 3.0 System Operations EN | 16 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 The indicators for any zones that are programmed to be automa tically is olated in STAY Mod e 2 fla sh until the Exit Time expires. At the end of Exit Time, the zone indicators are extinguished and the codepad sounds one short beep.[...]

ICP-CC488 | Installation Guid e | 3.0 System Operations EN | 17 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 3.9 Codepad Fire Alarm An audible codepad Fire Alarm activates when a user presses [4] and [ 6] on the remote co depad simultaneously. A dist inct fire sound em its through the horn speak er to indicate this type of alarm. The fire [...]

ICP-CC488 | Installation Guid e | 3.0 System Operations EN | 18 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 5. Press [AWAY]. Two beeps sound and the system returns to the disarmed state. The indicators for th e selected zones continue to flash until the n ext time t he system i s disarm ed. Example To manu ally isola te zone s 1, 3, and 4[...]

ICP-CC488 | Installation Guid e | 3.0 System Operations EN | 19 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 14: System FAULT indicators Indicator Fault Descr iption 1 Low battery This fault register s when the system de tects a low c apacity backup battery. Th e system automatica lly performs a battery te st every 4 hours and every [...]

ICP-CC488 | Installation Guide | 4.0 Remote Radio Transmitter Operations EN | 20 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 15: Fault A nalysi s Condit ions Zone Indicator Fault Description Hold Down Button Zone Indicator Fault Condi tion 1 System fault 1 1 Low battery 2 Date and time 3 RF rece iver jam ming RF receiv er tamper swi[...]

ICP-CC488 | Installation Guide | 4.0 Remote Radio Transmitter Operations EN | 21 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Before a hand-held radio transmitter can operate the control panel, you must teach the transm itter’s radio code to the contro l panel. Refer to Section 4.3 Changing or Deleting Remote Radio User Codes for more in[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 22 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 To delete a remote radio User Code: 1. Enter the Master Code an d press [1][AWAY]. Three beeps sound and the STAY and AWAY indica tors flas h. 2. Enter the user number (9 to 16) you want to delete and press [AWAY]. Two beeps sound an[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 23 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Example To program RF wireless d evice number 3 who se 9- digit ID number is 000094946, ente r [1 2 3 4 0][AWAY ][3][AWAY] [0 0 0 0 9 4 9 4 6][AWAY] To delete an RF wirele ss device: 1. Enter the Installer Co de and pres s [0][AWAY].[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 24 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 21: Codepad Indica tors When Changin g Phone Numbers Zone Indicator s MAINS Digit 1 2 3 4 5 6 7 8 Indicat or 0 X 1 X 2 X 3 X 4 X 5 X 6 X 7 X 8 X 9 X X * X X # X X Pause X X B r e a k X X 15 X X 5.1.4 C hange Te lco Arm/ Disa rm[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 25 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 To program the telco disarm sequence: 1. Enter the Installer Co de and pres s [3][AWAY]. Three beeps sound and the STAY and AWAY indica tors flas h. 2. Press [2][AW AY] to chang e the telco disarming sequence. Three beeps sound. If a[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 26 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 23: Telephone Monitor Mode Indications Zone LED Dialing Event 1 Telephone line seized 2 Dialing phone n umber 3 Handshak e received 4 Data is being tr ansmitted 5 Kiss-o ff rece ived None Telephone l ine relea sed To turn Telep[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 27 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 5.2 Master Code Functions Master Code functions allow those us ers that have the appropriate prior ity level to perform ce rtain supe rvisor y level func tions. You can use the se functions only when the system is disarmed. The defau[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 28 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 27: User Numbers Displaye d by the Codepad Indica tors User Zone Indicator s Number 1 2 3 4 5 6 7 8 1 X 2 X 3 X 4 X 5 X 6 X 7 X 8 X Example To delete user code number 3, enter: [2 5 8 0 1][AWAY ][3][AWAY][STAY] 5.2.3 Changing a[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 29 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 29: Domestic Dialing Digits Digit Required Number to Program Digit Required Number to Progra m 0 0 8 8 1 1 9 9 2 2 3 3 * [STAY]1 4 4 # [STAY]2 5 5 4 sec paus e [STAY]3 6 6 break [STAY]4 7 7 15 [STAY]5 Example If you want to pro[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 30 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 4. Press [STAY][2][AWAY]. Two beeps sound and the system returns to the disarmed state. Example If you want to automatically divert all unanswered incoming calls to another telephone number (for example, 9672 1777) when the system is[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 31 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Example If Output 2 is programmed as 291000 in Locations 443 to 448, the Master Code ho lder can turn o n this output by entering: [2 5 8 0 5][AWAY ][2][AWAY][AWAY] To turn an output off from the re mote codepad: 1. Enter your Master[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 32 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 The al ar m memory play s back in this order : Table 33: Event Memory Playb ack Sequence Indicati on Event 1 All indicators o ff except MAINS System disarmed 2 Zone 4 and AWAY indicators li ght Alarm in Zone 4 3 Zone 3 and AWAY indic[...]

ICP-CC488 | Installation Guide | 5.0 System Func tions EN | 33 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 For more inform ation, refer to Section 5.1.5 S etting STAY Mode 2 Zones on page 25 (using the Installer Code function) or Section 5.2.6 Set ting STAY Mode 2 Zones on page 25 (using the Master Code function). STAY Mode 2 is not avail[...]

ICP-CC488 | Installatio n Guide | 6.0 Remote Arming by Telephon e EN | 34 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 To dete rmi ne the are a to which th e code pad belongs: 1. Press and hold [8] unti l two beeps sound. A zone indicator lights to show the area to which the codepad belongs. Zone 1 = Area 1 codepad Zone 2 = Area 2 codepad [...]

ICP-CC488 | Installatio n Guide | 7.0 Programming EN | 35 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 When you enter Installer’s Programming Mode, you are automatically positioned at Location 000, the first digit of the Primary Telephone Number for Receiver 1. The codepad indicators show the current data stored in this locat ion. Table [...]

ICP-CC488 | Installatio n Guide | 7.0 Programming EN | 36 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 If you do not e nter Installer’s Pro gramming Mode first, co nnecting the CC891 Programming Key to the cont rol panel when the pro gramming key memory is blank corrupts the contro l panel’s memory. If this occurs, you must ret urn the[...]

ICP-CC488 | Installatio n Guide | 7.0 Programming EN | 37 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 3. Enter [9 5 9 #]. Two beeps soun d afte r a s ucces sful t est of the programming key. A long b eep indicates that the programming key data is c orrupt and must be erased to clear the corrupt data. Refer to Section 7.4.6 on page 38 fo r[...]

ICP-CC488 | Installatio n Guide | 7.0 Programming EN | 38 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 3. Enter [9 6 3 #]. Two beeps sound after the programming key’s data is successfully copied to the control panel. A long beep in dicates that the programming key is corrupt and must be era sed to clear the corrupt data. Refer to Section[...]

ICP-CC488 | Installatio n Guide | 7.0 Programming EN | 39 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Example (Auto Step E nabled) To enter the Prim ary Telephone Numb er 02 (pause) 9672 1055 when auto step is enable d: 1. Press [0 #]. You are positioned at Location 000 (the Primary Telephone Number for Receiver 1). 2. Program the number [...]

ICP-CC488 | Install ation Gu ide | 8.0 Alarm L ink Soft ware EN | 40 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 If you are required to disable the ability restore the control pa nel to its defau lt settin gs, a spec ial procedure eliminates the possibility of acci dentally setting this option. You must hold down the default button on the[...]

ICP-CC488 | Install ation Gu ide | 8.0 Alarm L ink Soft ware EN | 41 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 • Program the Call Back Telephone Number in Locations 159 to 174 (refer to Section 11 .9 on page 51). • Disable Optio n 1 in Locatio n 180 (refe r to Section 8.2 Alarm Li nk Options on page 41). The contr ol pa nel i s set [...]

ICP-CC488 | Installatio n Guide | 9.0 Domestic Dia ling EN | 42 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 2 – Enable Alarm Link Call Back If thi s option is select ed and a c allback telephone number is programmed, the remote programming computer must be connected to the telephone line programmed in the callback te lephone number in L[...]

ICP-CC488 | Install ation Gu ide | 10 .0 Dialer R eporting Formats EN | 43 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 9.2 Setting Up and Programming Domestic Reporting Programming the control panel for domestic reporting is e xtremely sim ple when usin g the Insta ller’ s Pro gramm ing Co mm and 965. Re fer to Section 7.4.7 Command 965[...]

ICP-CC488 | Install ation Gu ide | 10 .0 Dialer R eporting Formats EN | 44 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 39: Contact ID Format Breakdown Subscriber ID Number Qualifier Event Code Group Number Point ID Number SSSS Q XYZ GG CCC Four-digit Subscriber ID Number Event Qualifier, whi ch provides specif ic event inform ation:[...]

ICP-CC488 | Install ation Gu ide | 10 .0 Dialer R eporting Formats EN | 45 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 42: 4 + 2 Transmissi on Code Descriptions Code Description SSSS Subscriber ID Number A Alarm C H Channel Number 1 0 Zero T Trouble B Bypa ss E AC Fa il Co de 1 st digit AC AC Fail Code 2 nd digit L Low Battery Code [...]

ICP-CC488 | Install ation Gu ide | 10 .0 Dialer R eporting Formats EN | 46 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 43 : Point ID Co des Point ID Event Description Event Code Explanation Section Zones 1 to 8 Burglary Zone 130 Burglary 14.3.2 Medical Zone 100 24-Hour Medi cal 14.3.2 Panic Zone 120 24-Hour Panic 14.3.2 Hold-Up Zon [...]

ICP-CC488 | Install ation Gu ide | 10 .0 Dialer R eporting Formats EN | 47 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Figure 9: Basic Pager Display 1 – Subscriber ID number 2 – Zone status 3 – System status 4 – 0 – Zone Normal 1– Alarm 2 – Manually Isol ate d 3 – Auto Iso lated 5 – 8 – Disarmed 9 – Armed 6 – 0 –[...]

ICP-CC488 | Install ation Guide | 11 .0 Dialer Inform ation EN | 48 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 10.2 Basic Pager Display In formation The Pag er form at supp orts onl y eig ht zones. Subscriber ID Number This is t he identi fication n umber of the c ontrol p anel and is programmed in Locations 034 to 039 for Receiver 1 and[...]

ICP-CC488 | Install ation Guide | 11 .0 Dialer Inform ation EN | 49 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 45: Dialing Digits Digit Required Number to Program Digit Required Number to Progra m terminator 0 8 8 1 1 9 9 2 2 0 10 3 3 * 11 4 4 # 12 5 5 4 sec pause 13 6 6 break 14 7 7 15 15 11.1 Primary Teleph one N umber for Receiv[...]

ICP-CC488 | Install ation Guide | 11 .0 Dialer Inform ation EN | 50 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 2 – 1400 Hz 1400 Hz Handshake Tone is required to communicate in Ademco Lo Speed Format or Domestic Dialing Format. 3 – 2300 Hz Reserved. 4 – No Handsh ake This option is not recommended. 5 – Page r Hands hake Pager Hand[...]

ICP-CC488 | Install ation Guide | 11 .0 Dialer Inform ation EN | 51 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 46: Telco Arm/Disarm Diali ng Digits Digit Required Number to Program Digit Required Number to Progra m terminator 0 8 8 1 1 9 9 2 2 0 10 3 3 * 11 4 4 # 12 5 5 4 sec pause 13 6 6 break 14 7 7 15 15 To turn call forward (im[...]

ICP-CC488 | Install ation Gu ide | 12 .0 Dialer Options EN | 52 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Program the Ring Count to 14 to enable Answering Machine Bypass in the secondary mode. In this case, call the control panel and allow the phone to ring no more than twice and hang u p. Wait a minimum of 8 sec and call the control pa[...]

ICP-CC488 | Install ation Gu ide | 12 .0 Dialer Options EN | 53 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 2 – Remote Armi ng by Telephone A llowed If you select this option, you can remotely arm the system using a standard telephone b y pressing [*] on your touch-tone telephone. Refer to Section 6.0 Remote Arming by Tele phone on page[...]

ICP-CC488 | Installation Guide | 13.0 Access Codes EN | 54 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 2 – Lockout Telephone Line Fail Alarm Selecting this option allows an audib le alarm only once per arming cyc le when the co ntrol panel de tects the telephone line is cut or disconnected. This option does not follow the Swinger Shutd [...]

ICP-CC488 | Installation Guide | 13.0 Access Codes EN | 55 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Location 185 to 264 Location Default User Code 1 185 2 186 5 187 8 188 0 Priority Level 189 10 User Code 2 190 to 193 15 Priority Level 194 2 User Code 3 195 to 198 15 Priority Level 199 2 User Code 4 200 to 203 15 Priority Level 204 2 U[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 56 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Master Code Functions The user has ac cess to all Master Cod e functions. Refer to Section 5.2 Master Code Functions on page 26 for more information. 1 4.0 Zone Informat ion 14.1 D ay Alarm I nforma tion Location 265 Default 0 1 [...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 57 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 This configuratio n is suitable on ly for normally-closed (N/C) con tacts. If normally-open (N/O) c ontacts are us ed, as is the case with most smoke detectors, a s hort circuit on one zo ne activates both zones connected in para[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 58 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Figure 13: Split EOL Resistors Using Two N/O Conta cts 2 3 1 4 5 6 7 8 8 1 – +1 2 V 2 – Zone Input 3 – Zone 4 – EOL 3k3 5 – EOL 6K8 6 – EOL 1K5 7 – EOL 4K7 8 – N/O 14.3 Zone Programming The programm ing inform ati[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 59 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Location 267 to 378 (co ntinued) Location Default Zone #07 (De fault = Insta nt) Zone Typ e 309 0 Zone Pul se Count 310 0 Zone Pulse Cou nt Time 311 0 Zone Options 1 312 1 Zone Options 2 313 12 Report Code 314 1 Dialer Options 31[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 60 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 14.3.2 Zone Types The zone t ypes are li sted in Table 48 . Table 48: Zone Types Zone Type Description 0 Instant 1 Handover 2 Delay-1 3 Delay-2 4 Reserved 5 Reserved 6 24-Hour Medical 7 24-Hour Panic 8 24-Hour Holdup 9 24-Hour Ta[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 61 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 13 – 24-Hour Fire Zone A 24-Hour Fire Zone (Contact ID Even t Code 110) is always ready to ac tivate the dia ler, horn speaker, bell, and strobe, whether the system is armed or disarmed. A distinct fire sound is emitted through[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 62 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 The ICP-CC488 Control Panel performs lockout differently than othe r control pane ls because only t he first zone to activate an alarm is locked out. All other zones that are activated during the same Siren Run Time are reset whe[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 63 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 5 – Latc hing A rm in STA Y Mod e 1 The system is armed in STAY Mode 1 when using the latching keyswitch inpu t. Arming the system in AWAY Mode or disarming the system is not permitted from the Ke yswitch Zone. 6 – Latching D[...]

ICP-CC488 | Install ation Guide | 14 .0 Zone I nformatio n EN | 64 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 When isolating 24-Hour Zones, the s ystem automatically sends a Zone Bypass Report when the zone is selected to be iso lated. All non-24-Hour zones send a Bypass Report only when the system is armed. If you do not want the syste [...]

ICP-CC488 | Install ation Guide | 15 .0 Syst em Re porting Inform ation EN | 65 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 When the Swinger Shutdown Count is reached, all zones that were activated are locked ou t according to their individual lo ckout settings. If Lockout Dial er is enabled fo r any zone, the last restore signal is not t[...]

ICP-CC488 | Install ation Guide | 15 .0 Syst em Re porting Inform ation EN | 66 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 A Sensor Trouble Restore Report is sent for Burglary Zones when the zone is resealed or the next time the system is disarmed (whichever happens first). A 24- Hour Zone sends a restore signal only when it is reseal ed[...]

ICP-CC488 | Install ation Guide | 15 .0 Syst em Re porting Inform ation EN | 67 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 An RF Receiver Trouble Report (C ontact ID Event Code 355) is sent to the base station receiver when the RF receiver registers one of these events: RF Signal Jamming (Poin t ID Code 001) RF Receiver Tamper Switch (Po[...]

ICP-CC488 | Install ation Guide | 15 .0 Syst em Re porting Inform ation EN | 68 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Restore Repo rts are not sent for this event. If Codepad Panic Reports are not required, program Locations 405 and 406 as 0. 15.17 Codepad Fire Re port Location 407 to 408 Location Default Tens digit 407 7 Units digi[...]

ICP-CC488 | Install ation Guide | 15 .0 Syst em Re porting Inform ation EN | 69 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 15.2 4 Sys tem Stat us – L ow B att ery Report Location 420 to 421 Location Default Tens digit 420 10 Units digit 421 1 A Battery Test Failure Report (Contact ID Event Code 309) is sent to the base station receiver[...]

ICP-CC488 | Install ation Guide | 16 .0 Program mable Outputs EN | 70 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 When p rogr amming Test Re port o ption s, spe cify the hour and minute of the day the report is required, and how often to send the report. Test reports are reported on a daily basi s from every d ay to every fifteen days. Re[...]

ICP-CC488 | Install ation Guide | 16 .0 Program mable Outputs EN | 71 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 16.1 Redirecting Outputs to the Codepad Buzzer Multiple output even t types can be d irected to the codepa d buzze r so that th e buzzer can in dicate a number of events. To redirect an output to the codepa d buzzer, select an[...]

ICP-CC488 | Install ation Guide | 16 .0 Program mable Outputs EN | 72 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 0,12 Entry Warning + Day Alarm Resetting This output combines En try Warning and Day Alarm Resetting so that either of these two even ts activates the output. If the output is act ivated by Entry Timer 1, Entry Timer 2, or Ent[...]

ICP-CC488 | Install ation Guide | 16 .0 Program mable Outputs EN | 73 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 1,7 Sensor Watch Alarm This output operates when the Sensor W atch Count is reached. Refer to Section 14.3.5 Zone Options 1 on page 61 for more informatio n on programming zones for sensor watch. Refer to Section 15.5 Zone Sta[...]

ICP-CC488 | Install ation Guide | 16 .0 Program mable Outputs EN | 74 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 2,7 Fire Alarm Verificati on This feature is used on some commercial fire control panels to reduce false alarms from smoke detectors. It is similar to zo ne pulse cou nt used in some motion detectors. A fire zone is allotted a[...]

ICP-CC488 | Install ation Guide | 16 .0 Program mable Outputs EN | 75 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 3,5 Mimic Zone 1 3,6 Mimic Zone 2 3,7 Mimic Zone 3 3,8 Mimic Zone 4 3,9 Mimic Zone 5 3,10 Mimic Zone 6 3,11 Mimic Zone 7 3,12 Mimic Zone 8 These output types mimic the zone inputs. The output operates when the zone is unsealed[...]

ICP-CC488 | Install ation Guide | 16 .0 Program mable Outputs EN | 76 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Set DIP Switch 2 to the ON position for the Area 2 codepa d to op erate co rrectly. Refer to Figur e 16 on page 76 for the location of the DIP switches on the back of the codepa d. Figure 16: DIP Switch Location on Codepad 1 1[...]

ICP-CC488 | Installation Guide | 17.0 Sys tem Event Timers EN | 77 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 10 – N ormally Low, O ne-Sh ot Open This on e-shot pola rity i s norm ally 0 V and swit ches to open circuit when the ev ent occurs. The outpu t switches back to 0 V when the time parameter expires. Th is one-shot time setting [...]

ICP-CC488 | Installation Guide | 17.0 Sys tem Event Timers EN | 78 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 17.1 Programming Ent ry/Exit Timers There are two programming locations for Entry Timer 1, Entry Timer 2, Ex it Time for AWAY Mode, and Entry Guard Time for STAY Mode. The first location of the timer al lows you to set the timer [...]

ICP-CC488 | Installation Guide | 17.0 Sys tem Event Timers EN | 79 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 The Se nsor Wa tch Tim e count er is ac tive on ly when the control panel is disarmed. If the system is disarmed for 8 hours a day and the Sensor Watch Time is programmed for 1 day, a zone programmed for Sensor Watch registers a [...]

ICP-CC488 | Installation Guide | 18.0 Sys tem and Consumer Opti ons EN | 80 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 For part itione d ICP-CC488 Control Panels, both areas are automa tically disarmed at the sa me time each day. 17.14 Kiss-Off Wait Time Location 490 Default 3 Increments of 500 ms (500 ms to 8 sec) This location sets the[...]

ICP-CC488 | Installation Guide | 18.0 Sys tem and Consumer Opti ons EN | 81 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 4 – Strobe I ndications f or Radio Arm/D isarm This option allows the strobe to indicate when the system is armed and disarmed when remotely operating the system using the DSRF Series RF Receiver. Table 60: Strobe Indi[...]

ICP-CC488 | Installation Guide | 18.0 Sys tem and Consumer Opti ons EN | 82 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 2 – Ignore AC Fail If this option is selected, the M AINS indicator does not flash and the codepad does not beep every minute when the AC MAINS is disconnected from the cont rol pane l. If you w ant a p rogram mable ou[...]

ICP-CC488 | Installation Guide | 18.0 Sys tem and Consumer Opti ons EN | 83 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Program the time that the co ntrol panel au tomatically arms itself in Locations 482 to 485 (refer to Sect ion 17.12 Aut o Arming Ti me on page 79). Set the A uto Arming Pre-Alert Time in Location 481 (refer to Section 1[...]

ICP-CC488 | Install ation Guide | 19 .0 Part ition ing EN | 84 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 1 9.0 Part it ioning The ICP-CC488 Control Panel includ es the partitioning feature, which can effectively transform your single control panel into two separate areas. Normally, arming and disa rming the system tu rns the entire syst[...]

ICP-CC488 | Install ation Guide | 19 .0 Part ition ing EN | 85 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 19.3.1 Partitioning Options 1 Location 500 Default 0 1 First to open/la st to close reporti ng 2 A rea 1 codepad co nnected t o data term inal 4 Reset siren s from any area allowed 8 Mast er codepad to display AUX in dicator when onl[...]

ICP-CC488 | Install ation Guide | 19 .0 Part ition ing EN | 86 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 19.4.1 Zone Allocations for Areas 1 and 2 Location 502 to 517 Location Defau lt Zone 1 LED – Area 1 Codepad 502 0 Zone 2 LED – Area 1 Codepad 503 0 Zone 3 LED – Area 1 Codepad 504 0 Zone 4 LED – Area 1 Codepad 505 0 Zone 5 LE[...]

ICP-CC488 | Install ation Guide | 19 .0 Part ition ing EN | 87 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 19.6.1 Setting U p th e Maste r Parti tioned Codepad as the M ain Codepa d To use the CP5 Master Partitioned (CP500P) codepad as the main codepad in a partitioned system, conne ct the code pad to th e main co depad terminals (CP-, CP[...]

ICP-CC488 | Install ation Guide | 20 .0 RF I nformati on EN | 88 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Figure 21: Connections for CP-5 Master Partitioned C odepad and CP- 5 Area Addressable Co depad 1 – Data 2 – CLK 3 – +1 2 V 4 – GND 5 – Master Partitioned Codepa d 6 – Addressable Area Codepa d Set the DIP Switches and [...]

ICP-CC488 | Install ation Guide | 20 .0 RF I nformati on EN | 89 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 8 – Enable RF Jamming Monitor If this option is selected, the RF receive r monitors the backg rou nd RF le ve ls. If t his leve l rea ches a pr eset limit, the receive r assumes it is being jammed. This generates a fault on the c[...]

ICP-CC488 | Install ation Gu ide | 21 .0 Optional Equipme nt EN | 90 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Then , find t he RF d evice n umber i n Section 20.3 (for devices 1 through 8) on page 89 or S ection 20.4 (for devices 9 through 16) on pa ge 89. Use the dev ice’s corresponding locatio n (616 through 63 1). To map the selec[...]

ICP-CC488 | Install ation Gu ide | 21 .0 Optional Equipme nt EN | 91 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 21.3 SS914 EDMSAT Satelli te Siren The EDMS AT Satellit e Siren is a totally self- contained unit incorporating a high-powered siren and a weatherproof strobe. A 1.2 Ah sealed lead-acid battery must be installed. The EDMSAT req[...]

ICP-CC488 | Installatio n Guide | 22.0 T erminals and Description s EN | 92 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 22.0 T erminals and De script ions 22.1 Terminal Descriptions Table 63: Terminal Descr iptions Terminal Description EARTH Connect this terminal to the green wire on the TF 008 Plug Pack that is internally conn ected to M[...]

ICP-CC488 | Installatio n Guide | 22.0 T erminals and Description s EN | 93 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 22.2 Glossary Of Terms Table 64: Glossary Term Description 24-hour zone A monitored input where ta mper switche s and emergency switch es can be connected. If one of these switch es is violated at any time (whether the s[...]

ICP-CC488 | Installatio n Guide | 22.0 T erminals and Description s EN | 94 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Table 64: Glossary (continued) Term Description lockout siren A siren that activates only once per zone per arming cycl e. master code A numeric code used for arming and di sarming the system, and for allowing access to [...]

ICP-CC488 | Installatio n Guide | 22.0 T erminals and Description s EN | 95 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 22.3 D iagram s Figure 23: IC P-CC488 Wiring Diagram 1 – 605 pl ug 2 – 6 (Red) Telecom l ine (street) 5 (Yellow) Internal p hone line 3 and 4 N ot used 2 (Black) T elecom line (str eet) 1 (Gree n) Intern al phon e li[...]

ICP-CC488 | Installatio n Guide | 22.0 T erminals and Description s EN | 96 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Figure 24: ICP-CC488 Component Overlay 1 – Socket for tel ecom lead connec t 2 – Termination for phone li ne OUT – intern al phone line IN – Telecom line (street) 3 – Receiver in terface connectio n 4 – Zone [...]

ICP-CC488 | Installatio n Guide | 22.0 T erminals and Description s EN | 97 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Figure 25: DSRF Rad io Receiver Wiring Diagram 2 1 1 – ICP-CC488 Control Panel 2 – DSRF Receiver Wiring and Power Up 1. Remove power from the co ntrol panel. 2. Connect the RF Receiver to the control panel as shown i[...]

ICP-CC488 | Installatio n Guide | 22.0 T erminals and Description s EN | 98 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Figure 27: Telecom Connection Diagram for New Zealand 1 3 2 4 5 6 7 8 9 1 – Control panel 2 – Black wire 3 – Red wire 4 – RJ45 plug (top view) 5 – Internal phones 6 – Telecom line 7 – (black): telecom line [...]

ICP-CC488 | Install ation Guide | 23 .0 Appen dices EN | 99 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 23.0 Append ices 23.1 A ppendi x A – Tel epho ne Anti - Jamming There are many c ompanies that i mport American- designed products claiming to have anti-jam ming, and they push this feature as if it were a major breakthrough in contro[...]

ICP-CC488 | Installatio n Guide | 24.0 Spe cifications EN | 100 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Select Option 1 (Send Test Reports only if the system is armed) in Location 428 (refer to Section 18.5 Consumer Options 1 on page 82) and then s et the Test Report Time to be in the middle of the day. During Monday to Friday when th[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 101 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 • Disconnect this equipment imm ediately if it becomes physically damaged and arrange for it s disposal or repair. • The transmit level from this device is se t at a fixed level, so the re may be circumsta nces where the p[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 102 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Transmission Format for Receiver 2 Location 073 Refer to page 50 1 Contact ID 2 4 + 2 expres s 3 FSK 300 baud 4 Domestic 5 Basic pa ger 6 Reserved 7 Reserved 8 Reserved The Basic Pager optio n supports only eight zones du e to[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 103 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Installer Code Location 181 t o 184 Refer to pa ge 54 Default 1 2 3 4 User Codes Location 185 to 264 Refer to page 54 User Code 1 Locations 185 to 189 Default 2 5 8 0 10 User Code 2 Locations 190 to 194 Default 15 15 15 15 2 U[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 104 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Zones Location 267 to 378 Refer to page 58 Zone 1 Locations 267 to 273 Default 2 0 0 1 14 1 1 Zone 2 Locations 274 to 280 Default 1 0 0 1 14 1 1 Zone 3 Locations 281 to 287 Default 1 0 0 1 14 1 1 Zone 4 Locations 288 to 294 De[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 105 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Zone Dialer Options Option Description 0 No report required 1 Receiver 1 2 Receiver 2 4 Receiver 1 an d 2 8 Receiver 2 o nly when Receiver 1 fails Zone Descriptions Use this table as a reference to ind icate what each zone is [...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 106 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Codepad Pa nic Report Location 405 to 406 Refer to page 67 Default 7 15 Codepad Fire R eport Location 407 to 408 Refer to page 68 Default 7 14 Codepad Me dical Report Location 409 to 410 Refer to page 68 Default 7 13 Codepad R[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 107 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Entr y Guar d Time fo r STAY Mod e Location 472 to 473 Refer to page 78 Default 0 0 Location 472 Increments of 1 sec (0 t o 15 sec) Location 473 Increments of 16 sec (0 to 240 sec) Dela y Alar m Re por ting T ime Location 474 [...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 108 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Consumer Options 3 Location 498 Refer to page 83 1 C odepad fault be eps allowed 2 Use digit 3 for Codepa d Duress Alarm (instead of digit 9) 4 A larms activ ate sirens and strobe output s in STA Y Mode 1 and 2 8 Zone Tamper A[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 109 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 RF Options Location 599 Refer to page 88 Default 0 1 Sound siren on RF receiver fai l 2 Sound siren on RF receiver tam per/jamming 4 Unse al zone that fails supervision (i f supervision is enabled ) 8 Enable RF jamming monitor[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 110 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Disable Factory Default Location 900 Refer to page 39 0 Defaulting enable d 15 Defaulting disabled Syste m T ime Location 901 to 904 Refer to page 80 Default 0 0 0 0 Location 9 01 Hour of the da y – te ns digit Location 9 02[...]

ICP-CC488 | Install ation Guide | 25 .0 Program ming Sh eets EN | 111 Bosch Security Systems, Inc. | 12/08 | F01U08 9457-02 Country Code Country Code Country Code Country Code Country Code Italy 2 5 Jordan 6 2 Central African Republic 6 5 Maldives 6 5 Uzbekistan 6 5 Japan 2 6 Kazakhstan 6 2 Cha d 6 5 Mali 6 5 Vanuatu 6 5 Korea, South 2 7 Kyrgyzstan[...]

ICP-CC488 | Install ation Guide | Index EN | 112 Bosch Secur ity Systems, Inc. | 12/ 08 | F01U089457-02 Notes[...]

ICP-CC488 | Install ation Guide | Index EN | 113 Bosch Secur ity Systems, Inc. | 12/ 08 | F01U089457-02 Index A AC Mains Fail In 1 Hour ..... .......... ......... ............ ......... .......... .. 81 Ignore Fail Indication ........... .......... ......... ......... ..... 82 Access Codes Installer Code ............... ............ ......... .....[...]

ICP-CC488 | Install ation Guide | Index EN | 114 Bosch Secur ity Systems, Inc. | 12/ 08 | F01U089457-02 Programming Telephone Numbers ......... .......... .. 48 Subscriber ID Number For Receiver 1 ............. .. 50 Telco Arming Sequence ....... .......... ........... .......... .. 50 Telephone Line Fault Options .................52, 80, 84 Disarm[...]

ICP-CC488 | Install ation Guide | Index EN | 115 Bosch Secur ity Systems, Inc. | 12/ 08 | F01U089457-02 Night Arm Station ................. ............ ......... .......... .. 91 Programming Key ..... .......... ......... ............ ......... ..... 91 TF008 Plug Pack ............ .......... ........... .......... ......... 91 Output Event Ty pe [...]

ICP-CC488 | Install ation Guide | Index EN | 116 Bosch Secur ity Systems, Inc. | 12/ 08 | F01U089457-02 Enable "User Code + 0 + AWAY " To Arm/Disarm Both Areas ................... ............ ......... .......... ......... 85 Lock Area 1 To Receiver 1 & Lock Area 2 To Receiver 2............. ......... ............ .......... ........[...]

ICP-CC488 | Install ation Guide | Index EN | 117 Bosch Secur ity Systems, Inc. | 12/ 08 | F01U089457-02 Restore Code ........... .......... ........... .......... ......... ....... 66 Restore Report ........ ......... ............ .......... ......... ....... 64 Trouble ............ ......... ............ ......... .......... ........... ..... 65 Z[...]

© 2008 Bosch Security Systems, Inc. F01U089457-02 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450-9199 USA www.boschsecuri ty.com[...]