Chrysler 2010 manuale d’uso

Wrangler OWNER’ S MANUAL 2010[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 8 1 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 2 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 Rollover W arning ....................... 5 䡵 How T o Use This Manual .................. 6 䡵 W arnings And Cautions ................... 8 䡵 V ehicle Identification Number .............. 8 䡵 V ehicle Modifications/Alterations ............ 8 1[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle designed for both on-road and of f-road use. It can go places and perform tasks for w[...]

This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet, located on the DVD, and various customer-oriented documents. Please take the time to read these publica- tions carefully . Fo[...]

Failure to use the driver and passenger seat belts provided is a major cause of sever e or fatal injury . In a rollover crash, an unbelted person is significantly mor e likely to die than a person wearing a seat belt. Always buckle up. HOW TO USE THIS MANUAL Consult the T able of Contents to determine which section contains the information you desi[...]

1 INTRODUCTION 7[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Caution[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Key-In-Ignition Reminder ............... 1 3 䡵 Steering Wheel Lock .................... 1 3 ▫ T o Manually Lock The Steering Wheel ...... 1 3 ▫ T o Release The Steering Wheel Lock ......[...]

▫ Using The Panic Alarm ................. 2 1 ▫ T o T urn Off “Flash Lights W ith Lock” ....... 2 1 ▫ Programming Additional T ransmitters ...... 2 2 ▫ General Information ................... 2 2 ▫ T ransmitter Battery Replacement .......... 2 3 䡵 Remote Starting System — If Equipped ....... 2 4 ▫ How T o Use Remote Start ......[...]

▫ Rear Center Lap/Shoulder Belt Retractor Lockout (Four-Door Models Only) ......... 4 4 ▫ Adjustable Upper Shoulder Belt Anchorage . . . 44 ▫ Automatic Locking Retractors (ALR) Mode — If Equipped ....................... 4 6 ▫ Seat Belts In Passenger Seating Positions ..... 4 6 ▫ Seat Belt Pretensioners — If Equipped ...... 4 7 ▫ Enh[...]

A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number . The key code can also be obtained by your authorized dealer from your vehicle invoice. Ignition Key Removal 1. Place the shift lever in P AR[...]

W ARNING! Leaving unattended children in a vehicle is danger- ous for a number of reasons. A child or others could be injured. Children should be warned not to touch the parking brake, brake pedal, or the shift lever . Do not leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle. CAUTION! An unlocke[...]

NOTE: If you turned the wheel to the right to engage the lock, you must turn the wheel slightly to the right to disengage it. If you turned the wheel to the left to engage the lock, turn the wheel slightly to the left to disengage it. SENTR Y KEY 姞 The Sentry Key 威 Immobilizer System prevents unautho- rized vehicle operation by disabling the en[...]

CAUTION! The Sentry Key 威 Immobilizer system is not compat- ible with some after-market remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. All of the keys provided with your new vehicle have been programmed to the vehicle electr onics. Replacement Keys NOTE: Only keys that are pr[...]

Customer Key Programming If you have two valid Sentry Keys 威 , you can program new Sentry Keys 威 to the system by performing the following procedur e: 1. Cut the additional Sentry Key 威 T ransponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch. T urn the ignition switch t[...]

repr ogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be repr ogrammed. General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device mus[...]

T o Set the Alarm The V ehicle Security Alarm will set when you use the Remote Keyless Entry (RKE) transmitter to lock the doors and swing gate, or when you use the power door lock switch while the door is open. After all the doors are locked and closed, the V ehicle Security Light (located on the instrument cluster) will flash rapidly for about 16[...]

NOTE: • Unlocking the doors with the manual door lock plung- ers or the driver’s door lock cylinder will not disarm the V ehicle Security Alarm. • When the V ehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors. ILLUMINA TED ENTR Y The interior lights will come on when you open any door . The lights [...]

T o Unlock the Doors and Swing Gate Press and r elease the RKE transmitter UNLOCK button once to unlock the driver’s door only , or twice to unlock all the doors and swing gate. When the RKE transmitter UNLOCK button is pressed, the Illuminated Entry will initiate and the parking lights will flash twice. The system can be programmed to unlock all[...]

1. Press the RKE transmitter LOCK button for 4 to 10 seconds. 2. While the LOCK button is pressed (after four seconds), press the RKE transmitter P ANIC button. Release both buttons. The “Sound Horn On Lock” feature can be r eactivated by repeating this pr ocedure. Using The Panic Alarm T o turn the Panic Alarm featur e on or off, pr ess and ho[...]

NOTE: Pressing the RKE transmitter LOCK button while you are in the vehicle will activate the V ehicle Security Alarm. Opening a door with the V ehicle Security Alarm activated will cause the alarm to sound. Press the RKE transmitter UNLOCK button to deactivate the V e- hicle Security Alarm. The “Flash Lights W ith Lock” feature can be reactiva[...]

T ransmitter Battery Replacement The recommended r eplacement battery is CR2032. NOTE: Perchlorate Material – special handling may apply; See www .dtsc.ca.gov/hazardouswaste/ perchlorate. 1. If the RKE transmitter is equipped with a screw , remove the scr ew . W ith the RKE transmitter buttons facing down, use a flat blade screwdriver to pry the [...]

NOTE: If the RKE transmitter is equipped with a screw , reinstall and tighten the scr ew until snug. REMOTE ST ARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security . The system has a range of approximately 300 ft (91 m).[...]

T o Enter Remote Start Press and r elease the REMOTE ST AR T button on the RKE transmitter twice, within five sec- onds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. NOTE: • The park lamps will turn on and remain[...]

T o Exit Remote Start Mode and Drive the V ehicle Before the end of the 15-minute cycle, pr ess and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the ON position. NOTE: The ignition switch must be in the [...]

Upper Half Door Window Installation — If Equipped 1. Grasp the half door window and line up pins into pockets in lower door . 2. Push down to ensure the half door window is fully seated. Front Door Removal 1. Remove the hinge pin scr ews from the upper and lower outside hinges (using a #T50 T orx 威 head driver). 2. Unplug the wiring harness con[...]

NOTE: If the red latch on the connector is locked, push the red latch to the right until you can only see the latch on one end (right) of the connector . This will unlock the connector tab, allowing the tab to be pressed down and enabling the harness to be disconnected. 3. Unhook the door strap from the body hook. Be careful not to allow the door t[...]

2. Slide the front seat(s) fully forward. 3. Remove the trim access door from the bottom of B-pillar . 4. Unplug the wiring harness connector . NOTE: If the red latch on the connector is locked, push the red latch to the right until you can only see the latch on one end (right) of the connector . This will unlock the connector tab, allowing the tab[...]

5. Unhook the door strap from the body hook. 6. W ith the door open, lift the door to clear hinge pins from their hinges, and r emove door . T o reinstall the door(s), perform the previous steps in the opposite order . DOOR LOCKS Manual Door Locks The front (two-door models) and r ear doors (four-door models) are equipped with a r ocker-type interi[...]

NOTE: The ignition key that is used to start the vehicle is used to lock or unlock the doors, swing gate, and console storage. W ARNING! • For personal security reasons and safety in an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • Never leave children alone in a vehicle. Leaving unattended c[...]

W ARNING! (Continued) • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the key in the ignition. A child could operate power win- dows, other controls, or move the vehicle. Automatic Unlock Doors On Exit Th[...]

NOTE: Use the “Automatic Unlock Doors On Exit” feature in accor dance with local laws. Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The “Automatic Door Locks” feature is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttl[...]

WINDOWS Power Windows — If Equipped The power window switches are located on the instr u- ment panel center stack (below the radio). The top left switch controls the left fr ont window and the top right switch controls the right fr ont window . The lower left switch controls the left r ear passenger window (four- door models), and the lower right[...]

Auto-Down Both the driver and front passenger window switches have an “Auto-Down” feature. Pr ess the window switch past the first detent, release, and the window will go down automatically . T o cancel the Auto-Down move- ment, operate the switch in either the up or down direction and r elease the switch. T o stop the window from going all the[...]

Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down in certain open or partially open posi- tions. This is a normal occurrence and can be minimized by adjusting window opening. REAR SWING GA TE The swing gate[...]

CAUTION! Do not press on rear wiper blade when closing the rear flip-up window , as damage to the blade will result. W ARNING! Driving with the flip-up window open can allow poisonous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the flip-up window closed when you are oper- ating the vehicle. OCCUP [...]

If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also can be used to hold infant and child restraint systems. For mor e information on LA TCH, see Lower Anchors and T ether for CHildren (LA TCH). NOTE: The Advanced Fr ont Airbags have a multistage in[...]

ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is de- signed to lock during very sudden stops or collisions. This feature allows the shoul[...]

W ARNING! (Continued) • T wo people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly . Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size. Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close t[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together . 4. Position the lap belt across your thighs, below your abdomen. T o remove slack in th[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt cannot do its job as well. In a collision, it could even cut into you. Be sure the be[...]

Rear Center Lap/Shoulder Belt Retractor Lockout (Four-Door Models Only) This feature is designed to lock the r etractor whenever the 60% rear seatback is not fully latched. This pr events someone from wearing the r ear center lap/shoulder belt when the rear seatback is not fully latched. NOTE: • If the rear center lap/shoulder belt cannot be pull[...]

W ARNING! Position the shoulder belt height adjusters so that the belt rests across the middle of your shoulder . Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision. As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e ta[...]

Automatic Locking Retractors (ALR) Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked. The belt will still retract to r emove any slack in the shoulder belt. The Automatic Locking Mode is avail- able on all passenger-seating positions with a combina- tion lap/shoulder belt. When T o Use The Automatic Locking Mode Use [...]

Left Center Right First Row ALR Second Row ALR ALR ALR Third Row If the passenger seating position is equipped with an ALR and is being used for normal usage: Only pull the belt webbing out far enough to comfortably wrap around the occupants mid-section so as to not activate the ALR. If the ALR is activated you will hear a ratcheting sound as the b[...]

(BeltAlert 威 ) will alert the driver or front passenger to buckle the seat belt. The driver should also instruct all other occupants to buckle their seat belts. Once the warning is triggered, BeltAlert 威 will continue to chime and flash the Seat Belt Reminder Light for 96 seconds or until the driver ’s or front passenger ’s seat belt is buc[...]

4. T urn the ignition key to the OFF position. A single chime will sound to signify that you have successfully completed the programming. BeltAlert 威 can be reactivated by r epeating this procedur e. NOTE: Although BeltAlert 威 has been deactivated, the Seat Belt Reminder Light will continue to illuminate while the driver’s seat belt remains u[...]

Supplemental Restraint System (SRS) — Airbags This vehicle has Advanced Front Airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Airbag is mounted in the steering wheel. The front passenger airbag is mounted in the instrument panel, above the glove compartment. T[...]

The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation that are based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat [...]

W ARNING! • No objects should be placed over or near the airbag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the airbag to inflate. • Do not put anything on or around the Advanced Front Airbag covers or attempt to manually open them. Y ou may damage the airbags and yo[...]

The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation that are based on the severity and type of collision. Along with the seat belts, Advanced Fr ont Airbags work with the instrument panel knee bolsters to provide impr oved protection for the driver and fr ont passenger . Side ai[...]

3. The driver and front passenger seats should be moved back as far as practical to allow the Advanced Front Airbags room to inflate. 4. Do not lean against the door or window . If your vehicle has side airbags, and deployment occurs, the side airbags will inflate forcefully into the space between you and the door . 5. If the airbag system in this [...]

Airbag System Components Y our vehicle may be equipped with the following airbag system components: • Occupant Restraint Controller (ORC) • Airbag W arning Light • Steering Wheel and Column • Instrument Panel • Knee Impact Bolster • Driver Advanced Front Airbag • Passenger Advanced Front Airbag • Supplemental Seat-Mounted Side Airba[...]

The Advanced Front Airbags will not deploy in all frontal collisions, including some that may produce substantial vehicle damage — for example, some pole collisions, truck underrides, and angle of fset collisions. On the other hand, depending on the type and location of impact, Advanced Front Airbags may deploy in crashes with little vehicle fron[...]

It also includes diagnostics that will illuminate the instrument cluster Airbag W arning Light if a malfunc- tion is noted that could affect the airbag system. The diagnostics also recor d the nature of the malfunction. W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in [...]

The ORC determines if a side collision requir es the side airbags to inflate based on the severity and type of collision. Based on the severity and type of collision, the side airbag inflator on the crash side of the vehicle is trig- gered, r eleasing a quantity of non-toxic gas. The inflating side airbag exits through the seat seam into the space [...]

NOTE: Front and/or side airbags will not deploy in all collisions. This does not mean something is wrong with the airbag system. If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the ai[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to recor d such data as: • How various systems in your vehicle were operating; • Whether or not the driver and passenger safety belts were buckled/fastened; • How far (if at all) the driver was depressing the accel[...]

Children 12 years and under should ride pr operly buck- led up in a rear seat, if available. According to crash statistics, children ar e safer when properly r estrained in the rear seats, rather than in the fr ont. There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safe[...]

• The infant carrier is only used rearwar d-facing in the vehicle. It is recommended for childr en who weigh up to about 20 lbs (9 kg). “Convertible” child seats often have a higher weight limit in the rearwar d-facing direction than infant carriers do, so they can be used rearwar d-facing by children who weigh mor e than 20 lbs (9 kg) but ar[...]

Here ar e some tips for getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. The manufactur er also recommends that you try a child restraint in the vehicle seats wher e you will use it before you buy it. • The restraint must [...]

• Buckle the child into the restraint exactly as the manufacturer’s instr uctions tell you. • When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Do not leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause serious pe[...]

• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind the back. NOTE: For additional information, refer to www .seatcheck.org or[...]

NOTE: If your child restraint seat is not LA TCH- compatible, install the restraint using the vehicle seat belts. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap. LA TCH — Ch[...]

NOTE: When using the LA TCH attaching system to install a child restraint, please ensur e that all seat belts not being used for occupant restraints ar e stowed and out of reach of childr en. It is recommended that befor e installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach. If[...]

Installing the LA TCH-Compatible Child Restraint System W e urge you to carefully follow the dir ections of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system. The rear[...]

In addition, there ar e tether strap anchorages behind each rear seating position located on the back of the seat. Latch Anchorages (Four-Door Models) T ether Strap Mounting (T wo-Door Models) 70 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE[...]

Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means for adjusting the tension of the strap. Forward- facing toddler restraints and some r ear-facing infant restraints will also be equipped with a tether strap having a hook for[...]

W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. Installing Child Restraints Using the V ehicle Seat Belt The seat belts in the pas[...]

2. Finally , pull on any excess webbing to tighten the lap portion around the child r estraint. Any seat belt system will loosen with time, so check the belt occasionally , and pull it tight if necessary . T o attach a Child Restraint tether strap: Route the tether strap over the seatback and attach the hook to the tether anchor located on the back[...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. V ehicles With Rear W eb Buckles That May Need T o Be T wisted • In the rear seat, you may have tr ouble tightening the lap/[...]

ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-thr ottle acceleration within t[...]

W ARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly . Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it [...]

damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for br oken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil[...]

they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways. W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place [...]

W ARNING! (Continued) Failure to properly follow floor mat installation or mounting can cause interference with the brake pedal and accelerator pedal operation causing loss of control of the vehicle. Periodic Safety Checks Y ou Should Make Outside the V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones[...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 6 ▫ Inside Day/Night Mirror ................ 8 6 ▫ Outside Mirrors ...................... 8 7 ▫ V anity Mirrors ....................... 8 8 䡵 Uconnect™ Phone — If Equipped ........... 8 8 ▫ Operation .......................... 9 0 ▫ Ph[...]

▫ Manual Seat Height Adjustment — If Equipped ...................... 1 2 6 ▫ Front Seatback Recline ................. 1 2 6 ▫ Front Easy Entry Seats — T wo Door Models ........................... 1 2 7 ▫ Head Restraints ..................... 1 2 8 ▫ Fold And T umble Rear Seat — T wo Door Models ........................... 1 3 0 ▫ [...]

䡵 W indshield W ipers And W ashers .......... 1 4 1 ▫ W indshield W iper Operation ............ 1 4 2 ▫ Intermittent W iper System .............. 1 4 3 ▫ W indshield W ashers .................. 1 4 3 ▫ Mist Feature ........................ 1 4 4 䡵 T ilt Steering Column ................... 1 4 5 䡵 Electronic Speed Contr ol — If Equip[...]

䡵 Freedom T op™ Three-Piece Modular Hard T op — If Equipped ........................ 1 6 0 ▫ Front Panel(s) Removal ................ 1 6 1 ▫ Freedom T op™ Storage Bag ............. 1 6 3 ▫ Front Panel(s) Installation .............. 1 6 7 ▫ Front Panel(s) Installation W ith Rear Hard T op Removed ....................... 1 6 7 ▫ Rea[...]

䡵 Sunrider 威 (T wo-Door Models) — If Equipped . 231 ▫ Opening The Sunrider 威 ................ 2 3 2 ▫ Closing The Sunrider 威 ................ 2 3 4 䡵 Sunrider 威 (Four-Door Models) — If Equipped . 234 ▫ Opening The Sunrider 威 ................ 2 3 5 ▫ Closing The Sunrider 威 ................ 2 3 7 䡵 Rear W indow Features [...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle). The mirr or should[...]

Outside Mirrors T o receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror . W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passeng[...]

V anity Mirrors V anity mirrors are located on the sun visors. T o use the mirrors, r otate the sun visor down and swing the mirror cover upward. Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your cellular phone usin[...]

• www .jeep.com/uconnect • or call 1–877–855–8400 Uconnect™ Phone allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth 威 “Hands-Free Pr ofile” cellu[...]

NOTE: The driver side upper windshield trim contains the microphone for the Uconnect™ Phone. V oice Command Button Actual button location may vary with the ra- dio. The individual buttons are described in the “Operation” section. The Uconnect™ Phone can be used with any Hands-Free Profile certified Bluetooth 威 cellular phone. See the Ucon[...]

• For each feature explanation in this section, only the compound form of the voice command is given. Y ou can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the compound form voice command ⬙ Phonebook New Entry , ⬙ or you can break the compound form command into two voi[...]

The following are general phone to Uconnect™ Phone pairing instructions: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the beep, say ⬙ Pair a Phone ⬙ and follow the audible prompts. • Y ou will be asked to say a four-digit Personal Identi- [...]

• The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901 ⬙ . • The Uconnect™ Phone will confirm the phone number and then dial. The number will appear in the display of certain radios. Call by Saying a Name • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the followi[...]

• When prompted, enter the number designation (e.g., ⬙ Home, ⬙⬙ W ork, ⬙⬙ Mobile, ⬙ or ⬙ Pager ⬙ ). This will allow you to store multiple numbers for each phonebook entry , if desired. • When prompted, r ecite the phone number for the phonebook entry that you are adding. After you are finished adding an entry into the phone- boo[...]

• Depending on the maximum number of entries down- loaded, there may be a short delay befor e the latest downloaded names can be used. Until then, if avail- able, the previous downloaded phonebook is available for use. • Only the phonebook of the currently connected cellu- lar phone is accessible. • Only the cellular phone’s phonebook is do[...]

• Some phones cannot send phonebook entries if they are alr eady connected to any system via Bluetooth 威 , and you may see a message on the phone display that the Bluetooth 威 link is busy . In this case, the user must first disconnect or drop the Bluetooth 威 connection to the Uconnect™ phone, and then send the address book entry via Bluet[...]

cellular and a home number , but you can add ”John Doe’s” work number later using the ⬙ Phonebook Edit ⬙ feature. Delete Uconnect™ Phonebook Entry NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook D[...]

• The Uconnect™ Phone will ask you to verify that you wish to delete all the entries from the phonebook. • After confirmation, the phonebook entries will be deleted. • Note that only the phonebook in the current language is deleted. • Automatic downloaded phonebook entries cannot be deleted or edited. List All Names in the Uconnect™ Pho[...]

Answer or Reject an Incoming Call - No Call Currently in Progress When you receive a call on your cellular phone, the Uconnect™ Phone will interrupt the vehicle audio sys- tem, if on, and will ask if you would like to answer the call. Press the button to accept the call. T o reject the call, press and hold the button until you hear a single beep,[...]

T oggling Between Calls If two calls are in pr ogress (one active and one on hold), press the button until you hear a single beep, indicating that the active and hold status of the two calls have switched. Only one call can be placed on hold at a time. Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the [...]

Call Continuation Call continuation is the progr ession of a phone call on the Uconnect™ Phone after the vehicle ignition key has been switched to OFF . Call continuation functionality avail- able on the vehicle can be any one of three types: • After the ignition key is switched to OFF , a call can continue on the Uconnect™ Phone either until[...]

Emergency Assistance If you are in an emer gency and the cellular phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the Uconnect™ Phone is operational, you may reach the emer gency number as follows: • Press the button to begin. • After the ⬙ Ready ⬙ prompt an[...]

T owing Assistance If you need towing assistance: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ T owing Assistance. ⬙ NOTE: • The towing assistance number dialed is based on the country where the vehicle is pur chased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 for Me[...]

When calling a number with your Uconnect™ Phone that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can press the button and say the sequence you wish to enter , followed by the word ⬙ Send. ⬙ For example, if r equired to enter your PIN followed with a pound, ( 3746# ) ,y o uc a n press the button [...]

T urning Confirmation Prompts ON/OFF T urning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number befor e you dial it). • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations. ⬙ The Uconnect™ Phone wi[...]

Mute/Un-Mute (Mute OFF) When you mute the Uconnect™ Phone, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the Uconnect™ Phone: • Press the button. • Following the beep, say ⬙ Mute. ⬙ In order to un-mute the Uconnect™ Phone: • Press the [...]

• When prompted, say ⬙ List Phones. ⬙ • The Uconnect™ Phone will play the phone names of all paired cellular phones in or der from the highest to the lowest priority . T o “select” or “delete” a paired phone being announced, press the button and say “Select” or “Delete.” Also, see the next two sec- tions for an alternate w[...]

Things Y ou Should Know About Y our Uconnect™ Phone Uconnect™ Phone T utorial T o hear a brief tutorial of the system features, press the button and say “Uconnect™ T utorial.” V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, the Uconnect™ Phone V oice T raining feature ma[...]

V oice Command • For best performance, adjust the rearview mirr or to provide at least 1 ⁄ 2 in (1 cm) gap between the overhead console (if equipped) and the mirror . • Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that[...]

• Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zer o” not “eight hundred”. • Y ou can say ⬙ O ⬙ (letter ⬙ O ⬙ ) for ⬙ 0 ⬙ (zero). • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertib[...]

SMS Uconnect™ Phone can read or send new messages on your phone. Read Messages: If you receive a new text message while your phone is connected to Uconnect™ Phone, an announcement will be made to notify you that you have a new text message. If you wish to hear the new message: • Press the button. • After the “Ready” prompt and the follo[...]

List of Preset Messages: 1. Y es 2. No 3. Where are you? 4. I need more direction. 5. L O L 6. Why 7. I love you 8. Call me 9. Call me later 10. Thanks 1 1. See Y ou in 15 minutes 1 2 . Ia mo nm yw a y 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18. When can we meet 19. Send number to call [...]

T urn SMS Incoming Announcement ON/OFF T urning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming mes- sages. • Press the button. • After the “Ready” prompt and the following beep, say “Setup, Incoming Message Announcement,” you will then be given a choice to change it. Bluetooth 威 Communication L[...]

1 14 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 15[...]

1 16 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 17[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again V oice Commands Primary Alternate(s) redial return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interf[...]

NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the V oice Command button, listen for the beep, and say your command. Pressing the V oice Command button while the system is speaking is known as “barging in.” The sys[...]

Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the V oice Command button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust t[...]

Radio FM T o switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select the next station) • “Previous Station” (to select the pr evious station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” ([...]

Memo T o switch to the voice recorder mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding, you may press the V oice Command button to stop recor ding. Y ou proceed by saying one of the following commands: − “Save” (to save the memo) − “Continue” (to[...]

NOTE: Keep in mind that you have to press the V oice Command button first and wait for the beep before speaking the “Bar ge In” commands. V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers the Uconnect™ V oice “V oice T raining” feature may be used. 1. Press the V oice Command[...]

Front Seat Adjustment Move the seat forward or r earward by lifting the lever . Release the lever when the seat is in the desired position. Using body pressur e, move forward and r earward on the seat to make sure that the latch is fully engaged. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat co[...]

Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using the ratcheting handle, located on the outboard side of the seat. Pull upward on the handle to raise the seat; push downward on the handle to lower the seat. Front Seatback Recline Lean forward befor e lifting the handle, then lean back to the [...]

W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seatbelt and be seriously or fatally injured. Use the recliner only when the vehicle is parked. Front Easy Entry Seats — T wo Door Models Push the lever on the seatback rearwar d (toward the [...]

1. T o return the seat to a sitting position, r otate the seatback upright until it locks. 2. Push the seat rearward until the track locks. NOTE: • If equipped with combination lever the seatback will return to its first locked position. The r ecliner handle will have to be actuated to adjust the seatback to the desired r eclined position. • Th[...]

T o raise the head restraint, pull upward on the head restraint. T o lower the head restraint, press the lar ge button, located on the base of the head restraint, and push downward on the head r estraint. NOTE: The rear head r estraints are not adjustable. T o remove the head restraint, pull upwar d on the head restraint to it’s highest position,[...]

T o install the head restraint, insert the head restraint r ods into each guide, apply pressur e down on the headrest until the head restraint r eaches the first lock position, push the large button in and push down and adjust head restraint to desir ed position. NOTE: Ensure that the fr ont of the head restraint is facing toward the fr ont of the [...]

2. Slowly flip the entire seat forward. 3. Return the seat to the normal position. 4. Raise the rear seatback using the assist strap and firmly lock the seat into position. Rear Seat Release Folding Rear Seat 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 131[...]

Removing the Rear Seat — T wo Door Models W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. •[...]

3. Fold the rear seat forward following steps 1 thr ough 3 under “Fold and T umble Rear Seat” in this section. 4. Press down on the release bar on each side, and pull the seat out and away from the lower bracket. 5. Remove the seat from the vehicle. Replacing the Rear Seat — T wo Door Models Reverse the steps for removing the seat. W ARNING! [...]

NOTE: • Prior to folding the rear seat, it may be necessary to reposition the fr ont seat to its mid-track position. • Be sure that the fr ont seats are fully upright and positioned forward. This will allow the r ear seat to fold down easily . W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a [...]

T o Raise the Rear Seat Raise the seatback and lock it into place. If interference from the car go area pr events the seatback from fully locking, you will have difficulty r eturning the seat to its proper position. NOTE: If the rear seatback is not fully latched, the center shoulder belt will not be able to be extended for use. If you cannot exten[...]

T o close the hood, remove the support rod fr om the hood panel and place it in the retaining clip. Lower the hood slowly . Secure both of the hood latches. W ARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow t[...]

NOTE: Lens fogging can occur under certain weather conditions. T urning the headlights on will usually accel- erate the clearing process. T urn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the fr ont and rear turn signal lights. Headlight Switch T urn Signal [...]

NOTE: • If either light remains on and does not flash, or ther e is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. • A tone will chime if the turn signals ar e left on for more than 1 mile (2 km). Lane Change Assist [...]

Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights fr om illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights a[...]

Interior Lights The overhead light will turn on when a door is opened. It may also be turned on by rotating the contr ol for the dimmer switch on the multifunction lever fully upward. The overhead light will automatically turn of f in approxi- mately 10 minutes if a door is left open or the dimmer control is left in the dome light position. T urn t[...]

When a door is open and the interior lights are on, rotating the dimmer contr ol to the extreme bottom posi- tion will cause all the interior lights to turn off. This is also known as the ⬙ Party ⬙ mode because it allows the doors to stay open for extended periods of time without discharging the vehicle’s battery . WINDSHIELD WIPERS AND W ASH[...]

Windshield Wiper Operation Rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper opera- tion. Rotate the end of the lever upward to the thir d detent past the intermittent settings for high-speed wiper opera- tion. Front W iper Control 142 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted. Intermittent Wiper System Use the intermittent wiper when weather co[...]

If the lever is pulled while in the off position, the wipers will operate for two or three wipe cycles and then turn off. W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield w[...]

TIL T STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d. The tilt lever is located on the steering column, below the turn signal lever . Push down on the lever to unlock the steering column. W ith one hand firmly on the steering wheel, move the steering column up or down, as desired. Pull upwar ds on the lever [...]

W ARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle. Failure to follow this warning may result in serious injury or death. ELECT[...]

System can be reactivated by pushing the Electr onic Speed Control ON/OFF button and r esetting the desired vehicle set speed. T o Activate Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. T o turn the Elec- tronic Speed Contr ol system off, push the ON/OFF button a second time. The cruise indicator ligh[...]

T o V ary the Speed Setting When the Electronic Speed Contr ol is set, you can in- crease speed by pushing up and holding the RESUME ACCEL lever . If the lever is continually held in the RESUME ACCEL position, the set speed will continue to increase until the lever is r eleased, then the new set speed will be established. T apping RESUME ACCEL once[...]

W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy , snow-covered or slippery . T o Accelerate for Passing D[...]

ELECTRICAL POWER OUTLET There ar e two 12 V olt (13 Amp) auxiliary power outlets that can provide power for accessories designed for use with the standard power outlet adapters. The power outlet, located in the lower portion of the instrument panel, has a snap-on plastic cap so that it can be covered when not in use. When the optional cigar lighter[...]

The right-side power outlet is powered dir ectly from the battery (power available at all times). Items plugged into this power outlet may discharge the battery and/or prevent the engine fr om starting. W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. [...]

CAUTION! (Continued) • Power outlets are designed for accessory plugs only . Do not hang any type of accessory or acces- sory bracket from the plug. CUPHOLDERS Front Cupholders The front cupholders ar e located in the center console. NOTE: The front cupholder insert is r emovable for cleaning. Front Cupholders 152 UNDERST ANDING THE FEA TURES OF [...]

Rear Cupholders The rear cupholders ar e located on the back of the center console. STORAGE Console Storage Compartment T o lock or unlock the storage compartment, insert the ignition key and turn. T o open the storage compartment, press the latch and lift the cover . Rear Cupholders Center Console 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 153[...]

Rear Storage Compartment The rear storage compartment cover is held by a spring- loaded latch. In order to r emove the rear storage com- partment cover , use the following procedur e: NOTE: The rear storage compartment latch should not be used as cargo tie-down. 1. Flip up the pull loop so it is perpendicular (straight up) to the top surface of the[...]

hard top are to be used independently . Removal is mandatory to prevent any possible wear and tear on the soft top. Y our vehicle warranty will not cover damage resulting fr om both tops remaining on the vehicle at the same time for extended periods of time. Removing the Soft T op 1. Locate and r emove the two boxes that contain the following items[...]

4. Disconnect the knuckles from the left and right metal pivot brackets. Remove the soft top from the vehicle and store in a clean, dry location. NOTE: T o aid in disconnecting the knuckles, you may carefully tap on the knuckles using a r ubber mallet. 5. Unzip the zipper on the sport bar cover to expose the pivot brackets. Remove the brackets usin[...]

Installing the Soft T op NOTE: The following procedur es are for first time set up only . For future soft top procedur es, refer to “Soft T op” in this section. 1. Locate and remove the following items prior to hard top removal: • Right and left door frames • Door frame attachment knobs (four for two-door models, six for four-door models) ?[...]

a. If the pivot brackets have been removed, unzip the sport bar covers and attach the pivot brackets to the sports bar with the four screws that wer e removed using a #T30 T orx 威 head driver . Re-cover and re-zip the sport bar covers. b. Lay the soft top into the rear of the vehicle with the bows pointing forward and the curved portion of the bo[...]

d. Screw the pivot screws back into place using a #T30 T orx 威 head driver . Secure them until they are snug, being careful not to cr oss-thread the scr ews or over- tighten. CAUTION! Do not overtighten the screws. Y ou can strip the screws if they are overtightened. 5. Remove the swing gate bar (black metal bar for bottom of rear window) and set[...]

FREEDOM TOP™ THREE-PIECE MODULAR HARD TOP — IF EQUIPPED CAUTION! • The hard top is not designed to carry any addi- tional loads such as roof racks, spare tires, build- ing, hunting, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle, and thus cannot properly carry any additional loads oth[...]

Front Panel(s) Removal NOTE: Left panel must be removed before removing right panel. 1. Fold down the sun visor , and move it to the side. 2. T urn the rear fasteners (knobs) (located on the over - head speaker bar assembly) counterclockwise until they can be removed. 3. T urn the center L-shaped locks (two) from the center of the roof panel. 3 UND[...]

4. T urn the rear L-shaped lock (located above the shoul- der belt anchorage). 5. Unlatch the header panel latch located at the top of the windshield. 6. Remove the left-hand panel. T o remove the right panel, follow the steps above except for Step 3. 162 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

Freedom T op™ Storage Bag Y our vehicle comes with a Freedom T op™ storage bag that allows you to store your Fr eedom T op™ panels. The storage bag contains two compartments and fits behind the rear seat. Lay the Freedom bag down so the loops and hooks ar e facing downward. Unzip the bag and fold back the outer flap. Release the V elcro on th[...]

Unfold the black panel divider (ensure the divider is laying flat). Secure the V elcro, located at the center of the divider . Insert the left-side Freedom panel into the bag with the latches facing upward. NOTE: Ensure the fr ont Freedom panel latch is closed prior to inserting the panel into the bag. 164 UNDERST ANDING THE FEA TURES OF YOUR VEHIC[...]

Unfold the outer flap and zip the Freedom bag closed. Install the seat attachment strap (at the top of the bag) through the loops. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 165[...]

Lift the Freedom bag into the vehicle with the hooks and straps facing the back of the rear seat. Attach the clips at the bottom of the bag to the child restraint anchorages, located at the base of the rear seat. W rap the upper strap around the r ear head restraints and loop the strap through the buckle. Pull on the strap to tighten the Freedom ba[...]

Front Panel(s) Installation NOTE: Set the panels on the windshield frame so that there is no over hang. Also, make sure that the panels ar e sitting flush with the body . 1. Install the right panel first, then the left panel. 2. Reinstall the panel(s) using the same steps for removal in reverse or der . Front Panel(s) Installation with Rear Hard T [...]

2. Install the right panel first, then the left panel. 3. Reinstall the panel(s) using the same steps for removal in reverse or der . Rear Hard T op Removal 1. Remove both front panels. Refer to “Fr ont Panel(s) Removal” in this section. 2. Open both doors. 3. Remove the two T orx 威 head screws that secur e the hard top at the B-pillar (near [...]

6. Locate the wire harness on the left rear inside corner of the vehicle. 7. Release the red locking tab by pushing upward. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 169[...]

8. T o remove the wiring harness pr ess the side tab and pull to disconnect. NOTE: If necessary , pliers can be used to lightly squeeze grips while disconnecting the washer hose. 9. T o remove the washer hose, pinch the grips on hose connector and pull. 10. Close the swing gate. 1 1. Remove the har d top from the vehicle. Place the har d top on a s[...]

Rear Hard T op Installation NOTE: If the door frames are installed fr om soft top usage, they must be removed prior to installation of the hard top. 1. Inspect the hard top seals for damage and replace if necessary . 2. Install the hard top using the same steps for removal in reverse or der . Make sure that the har d top is sitting flush with the b[...]

CAUTION! (Continued) • Careless handling and storage of the removable door frame(s) may damage the seals, causing water to leak into the vehicle’s interior . • The door frame(s) must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle’s interior . Door Frame Removal — T wo-Door Models 1[...]

2. Place one hand on the upper rear and one hand on the front of the door frame. 3. Pull the frame toward you with your rearwar d hand to remove the frame fr om the vehicle. 4. Screw the knobs back into the door frame and fold for storage. Store in a secur e location. W ARNING! Never store the door frames in your vehicle. In an event of an accident[...]

Door Frame Installation — T wo-Door Models 1. Unfold door frame and unscrew thumbscrews. 2. Set the door frame pin into the hole on top of the body side, behind the door opening. 3. After the door frame pin has been set into the body side hole, carefully set the fr ont of the door frame into the rubber seal at the top of the windshield. 4. Starti[...]

5. Starting with the front knob, screw in and tighten both knobs. Repeat on the other side. Door Frame Removal — Four-Door Models 1. Unscrew and remove the two forwar d most door frame attachment knobs. W ARNING! Use both hands to remove the door frames. The door frames will fold and could cause injury if both hands are not used. 3 UNDERST ANDING[...]

2. Place one hand on the upper rear and one hand on the upper front of the fr ont door frame. 3. Pull the frame toward you with your front hand to remove the frame fr om the vehicle. 4. Unscrew and remove the r emaining door frame at- tachment knob on the rear door frame. 176 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

5. Place one hand on the upper rear and one hand on the upper front of the r ear door frame. Pull the frame toward you with your rear hand to r emove the frame from the vehicle. 6. Screw the knob back into the door frame and fold for storage. Store in a secur e location. W ARNING! Never store the door frames in your vehicle. In an event of an accid[...]

Door Frame Installation — Four-Door Models 1. Install the rear door frame first. 2. Set the door frame pin into the hole on top of the body side, just behind the rear door opening. 3. Position the top of the door frame against the metal sport bar and press onto the side bar making sur e not to pinch the material of the sports bar covers and to en[...]

5. Carefully set the front of the fr ont door frame in the rubber seal at the top of the windshield. Then, clip the front of the door rail over the side bar making sur e that the material for the side bar cover is not pinched by the door frame. Position the rear of the fr ont door frame to lay on top of the front of the r ear door frame. 6. Loosely[...]

SOFT TOP — TWO DOOR MODELS Please visit the owners section of Jeep.com for instruc- tional videos. CAUTION! The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunt- ing, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle and, thus, cannot pro[...]

CAUTION! (Continued) • Refer to “Appearance Care for Fabric T op Models” in “Maintaining Y our V ehicle” for further infor- mation. It contains important information on cleaning and caring for your vehicle’s fabric top. • Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft[...]

CAUTION! (Continued) • Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle’s interior . • The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle’s interior . Quick Steps to Lowering the Soft T op Refer to “Lowering th[...]

2. Release header latches from the windshield frame. 3. Release the Sunrider 威 latch (both sides). 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 183[...]

4. Open the swing gate and lower the top. NOTE: Ensure fabric does not over hang the sides of the vehicle. Quick Steps to Raising the Soft T op Refer to “Raising the Soft T op” in this section for further information. 1. Open the swing gate and raise the top, engaging the Sunrider 威 latches (another person may be needed to help with this oper[...]

2. Engage header latches. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 185[...]

3. Install rear corner panels. 4. Install side and back windows. 186 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

Lowering The Soft T op 1 — Header Bow 6 — Quarter W indow 2 — 2–Bow 7 — Check Strap 3 — 3–Bow 8 — Front Retainer — Quarter W indow 4 — Sail Panel 9 — Bottom Retainer — Quarter W indow 5 — Body Side Retainer 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 187[...]

1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels 188 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

NOTE: Clean side and rear windows befor e removal to assist in preventing scratching during r emoval of the soft top. If zippers are dif ficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning pr oducts are available thr ough your authorized dealer . 1. If your vehicle has half doors, remove each h[...]

5. Before unzipping the rear window , release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearwar d out of the swing gate brackets. • Unzip the rear window starting at the right lower corner of the window . Pull the zipper up, across the top and down to the left lower corner . Zip[...]

6. Undo the V elcro 威 that runs along the top and r ear edge of the side window . 7. Beginning from the rear lower corner , completely unzip the window . 8. Once unzipped, r emove the side window r etainers from the door channel and body side channel. Repeat this step on the opposite side. 9. Finish releasing the sail panel retainers fr om the bo[...]

10. As you begin to lower the top, fold the sail panels so that they rest on top of the soft top. 1 1. The swing gate brackets do not need to be r emoved unless the hard top is being installed. T o remove the swing gate brackets, pull the front of the bracket forwar d while rolling the entir e bracket back in toward the vehicle to disengage. 12. Co[...]

the Sunrider 威 package, proceed to Step 15. 13. Make sure the plastic sleeves are slid r earward over the Sunrider 威 link (Sunrider 威 Models only). 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 193[...]

14. Unlatch the side bows from both door rails (Sun- rider 威 Models only). 15. Before lowering the top, open the swing gate to prevent possible damage to the r ear center high-mounted brake light. Move to the front of the vehicle. Grasp the side bow behind the header and lift the top, folding it toward the r ear of the vehicle. NOTE: Help from an[...]

16. T uck the fabric and the check straps between the bows and as far inward as possible. This will keep any portion of the top from flapping outside of the vehicle. 17. Close the front header latches. 18. Remove the door frames, if desired. Refer to “Door Frame” in this section for further information. Raising the Soft T op 1. Unclip and move [...]

4. Standing on the side of the vehicle, lift the top by the side bow and the 2–bow (middle bow) up and over the sports bar until the header rests on the top of the windshield frame. 5. Make sure the Sunrider 威 bracket on the side bows latches to the door rails (Sunrider 威 Models only). 196 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

6. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches). 7. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it r earward and over the channel until it snaps onto the exterior part of the rail.[...]

8. Move to the rear of the vehicle and gently pull the sail panels over the rear r oof bow . 9. Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) toward the r ear window loose (on both sides). Pulling down on the rear roof bow (3–bow) will aid to r each the channel with the retainers. 198 UNDERS[...]

10. T o install the side windows, affix the window tem- porarily by attaching to the V elcro 威 in the rear corner . Start the zipper but close only about 1 in (2.5 cm). 1 1. Insert the fr ont retainer of the window into the door channel, making sure the r etainer is fully seated and properly positioned on the door frame. Failur e to do so can res[...]

12. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the r ear of the vehicle. Finish by closing the zipper completely and attaching the V elcro 威 along the top and rear of the window . Repeat this step for the opposite side. 1 — Incorrect Insertion 2 — Correct Inserti[...]

13. Locate the black swing gate bar . Slide the swing gate bar over the receiver at the bottom inside of the r ear window . The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 201[...]

14. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers ar e properly started and aligned before zipping to pr event damage. 15. Run the zipper fully around to the right side of the window . 202 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

16. Grasp the swing gate bar and position it into the swing gate brackets. 17. Apply downward pressur e on the top corner of the rear soft top bow (3–bow), then complete attaching the sail panel retainers into the body side channel. 18. Close the header latches and return the sun visors to their secured position. SOFT TOP (FOUR-DOOR MODELS) Pleas[...]

CAUTION! The soft top is not designed to carry any additional loads such as roof racks, spare tires, building, hunt- ing, or camping supplies, and/or luggage, etc. Also, it was not designed as a structural member of the vehicle, and thus cannot properly carry any addi- tional loads other than environmental (rain, snow , etc.). If the temperature is[...]

CAUTION! (Continued) • Refer to “Appearance Care for Fabric T op Models” in “Maintaining Y our V ehicle” for further infor- mation. It contains important information on cleaning and caring for your vehicle’s fabric top. • Do not use any tools (screwdrivers, etc.) to pry or force any of the clamps, clips, or retainers securing the soft[...]

CAUTION! (Continued) • Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle’s interior . • The soft top must be positioned properly to ensure sealing. Improper installation can cause water to leak into the vehicle’s interior . NOTE: Do not remove any of the thr ee attachment knobs unless[...]

Quick Steps for Lowering the Soft T op 1. Remove the side and back windows. 2. Release header latches from the windshield frame. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 207[...]

3. Fold header rearward, pulling the fabric to the r ear . 208 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

4. Release Sunrider 威 latch (both sides). 5. Open the swing gate and lower the top. NOTE: Ensure the fabric does not over hang the sides of the vehicle. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 209[...]

Quick Steps for Raising the Soft T op 1. Open the swing gate and raise the top, engaging the Sunrider 威 latches (another person may be needed to help with this operation). 210 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

2. Install rear corner panels. 3. Rotate the header forward. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 21 1[...]

4. Engage the header latches. 5. Install the side and back windows. 212 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

Folding Down The Soft T op 1 — Header Bow 6 — Body Side Retainer 2 — 2–Bow 7 — Quarter W indow 3 — 3–Bow 8 — Check Strap 4 — 4–Bow 9 — Front Retainer — Quarter W indow 5 — Sail Panel 10 — Bottom Retainer — Quarter W indow 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 213[...]

1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels 214 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

NOTE: Clean side and rear windows befor e removal to assist in preventing scratching during r emoval of the soft top. If zippers are dif ficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush. Cleaning pr oducts are available thr ough your authorized dealer . 1. If your vehicle has half-doors, remove each h[...]

5. Before unzipping the rear window , release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the swing gate bar by pulling it straight rearwar d out of the swing gate brackets. • Unzip the rear window starting at the right lower corner of the window . Pull the zipper up, across the top and down to the left lower corner . Zip[...]

6. Undo the V elcro 威 that runs along the top and r ear edge of the side window . 7. Beginning from the rear lower corner , completely unzip the window . 8. Once unzipped, r emove the side window r etainers from the door channel and body side channel. Repeat this step on the opposite side. 9. Finish releasing the sail panel retainers fr om the bo[...]

10. Fold the sail panels so that they rest on top of the soft top. 1 1. The swing gate brackets do not need to be r emoved unless the hard top is being installed. T o remove the swing gate brackets, pull the front of the bracket forwar d while rolling the entir e bracket back in toward the vehicle to disengage. 218 UNDERST ANDING THE FEA TURES OF Y[...]

12. Grasp the front side bow behind the header , and lift the top. 13. Fold back the front section of the top, pulling the fabric rearwar d. Gently rest the header on top of the r ear portion of the deck. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 219[...]

14. Fold the top so that the material forms a ⬙ W ⬙ as shown. Enter the vehicle and move the material into two folds. 15. Release the side bows by pressing down on the latch above the front of the r ear door . Push the top rearwar d to disengage. Repeat this step on the other side. 220 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

16. Before lowering the top, open the swing gate to prevent possible damage to the r ear center high-mounted brake light. Grasp the folded side bows and slide the top along the door frame track to the rear door frame. 17. Gently slide the side bows off the door frame track and lower the top down into the vehicle. NOTE: Help from another person will[...]

strap around the side bows and thr ough the slot on the body . 20. Close the front header latches. 21. Remove the door frames, if desired. Refer to “Door Frame” in this section for further information. Putting Up The Soft T op NOTE: Be extremely car eful when putting up the soft top to prevent the doors fr om getting scratched. It may be helpfu[...]

4. Grasp the folded side bows and lift to the top of the rear door frames. NOTE: Help from another person will ease this opera- tion. 5. Insert the slider feature of the knuckles into the door frame tracks and slide the top forward. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 223[...]

6. Ensure that the top locks into the Sunrider 威 locking mechanisms that are located above the fr ont of the rear doors. 7. Unclip and move the sun visors to the side. 8. Standing on the side of the vehicle, lift the top by the side bow until it rests on the windshield frame. 224 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

9. Open the header latches and engage the hook on each side onto the windshield loops (do not close the latches). 10. If the swing gate brackets were removed, install them by hooking the rear edge of the bracket on the interior side of the body channel. Then, rotate it r earward and over the channel until it snaps onto the exterior part of the rail[...]

1 1. Ensur e that the straps are positioned corr ectly before pulling the sail panels over the rear r oof bow (4–bow). Partially install the sail panel retainers into the body side channel, leaving the last 3 in (7.6 cm) toward the r ear window loose (on both sides). Pulling down on the rear roof bow (4–bow) will aid in r eaching the channel wi[...]

12. T o install the side windows, affix the window tem- porarily by attaching it to the V elcro 威 in the upper rear corner . Start the zipper but close only about 1 in (2.5 cm). 13. Insert the front retainer of the window into the door channel, making sure the r etainer is fully seated and properly positioned on the door frame. Failur e to do so [...]

14. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the r ear of the vehicle. Finish by closing the zipper completely and attaching the V elcro 威 along the top and rear of the window . Repeat this step for the opposite side. 1 — Incorrect Insertion 2 — Correct Inserti[...]

15. Locate the black swing gate bar . Slide the swing gate bar over the receiver at the bottom inside of the r ear window . The spongy part of the seal should be down and pointed outward to seal with the swing gate when closed. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 229[...]

16. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers ar e properly started and aligned before zipping to pr event damage. 17. Run the first zipper fully around to the right side of the window . 18. Grasp the swing gate bar and position it into the swing gate brackets. [...]

19. Complete the installation of the sail panel by insert- ing the rest of the r etainer into the body channel. 20. Close the header latches and return the sun visors to their secured position. SUNRIDER 姞 (TWO-DOOR MODELS) — IF EQUIPPED CAUTION! Operating the top, opening a door or lowering a window while the top is wet may allow water to drip [...]

Opening the Sunrider 姞 1. Unclip and move the sun visors to the side. 2. Release the header latches from the loops on the windshield frame. 3. Slide the plastic sleeve forward. 232 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

4. Grasp the header and lift the top back. Make sure the material is folded back as shown. NOTE: The Sunrider 威 latch on the door rail should not be activated for Sunrider 威 use. If activated, the soft top must be reinstalled starting fr om the sail panels. 5. Locate the straps to secure the side bows. W rap the straps around the bows as shown.[...]

Closing the Sunrider 姞 1. Remove the straps from the side bows. 2. Unclip and move the sun visors to the side. 3. Grasp the front header and pull it to the front of the vehicle. 4. Hook the header latches to the loops on the wind- shield frame, close latches, and return the sun visors to their original positions. 5. Slide the plastic sleeve rearw[...]

Opening the Sunrider 姞 1. Unclip and move the sun visors to the side. 2. Release the header latches from the loops on the windshield frame. 3. Grasp the front side bow behind the header , and lift the top. 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 235[...]

4. Fold back the front section of the top and gently rest the header on top of the rear portion of the deck. 5. Fold the top so that the material forms a ⬙ W ⬙ as shown. Enter the vehicle and move the material into two folds. 236 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

6. Secure the top by using the two provided straps. Each strap will wrap around the side bow and V elcro 威 to itself; use one strap on each side of the vehicle. Closing the Sunrider 姞 Perform the above steps in the opposite order . NOTE: Failure to fold the fabric r earward will allow the material to sag and may block the rearview mirr or . 3 U[...]

REAR WINDOW FEA TURES — HARD TOP ONL Y Rear Window Wiper/W asher — If Equipped A rotary switch on the center portion of the control lever (located on the right side of the steering column) controls the operation of the rear wiper/washer function. Rotate the switch upward to the first detent posi- tion for rear wiper operation. Rotate the switch[...]

Rear Window Defroster — If Equipped The rear window defr oster button is located on the bottom right-side of the blower control knob. Press this button to turn on the r ear window defroster . An indicator in the button will illuminate when the rear window defroster is on. The r ear window defroster automatically turns off after appr oximately 10 [...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 2 4 4 䡵 Instrument Cluster .................... 2 4 5 䡵 Instrument Cluster Descriptions ........... 2 4 6 䡵 Compass And T rip Computer — If Equipped . . 261 ▫ Control Buttons ..................... 2 6 1 ▫ T rip Conditions ..................... [...]

▫ Operating Instructions — V oice Command System — If Equipped ................. 2 8 3 ▫ Operating Instructions — Uconnect™ Phone — If Equipped ...................... 2 8 3 ▫ Clock Setting Procedur e — RBZ Radio ..... 2 8 3 ▫ Clock Setting Procedur e — RER/REN Radio ............................. 2 8 5 䡵 Media Center 130 (RES[...]

▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) ......... 3 1 2 ▫ Selecting Uconnect™ Multimedia (Satellite) Mode ............................. 3 1 3 ▫ Satellite Antenna ..................... 3 1 3 ▫ Reception Quality .................... 3 1 3 ▫ Operating Instructions — Uconnect™ Multimedia (Satellite) Mode ......[...]

INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 6 — Climate Controls 2 — Instrument Cluster 7 — Power Outlet 3 — Horn 8 — Lower Switch Bank 4 — Radio 9 — Auxiliary Power Outlet / Cigar Lighter 5 — Glove Compartment 244 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 245[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank. NOTE: When the ignition switch is turned to OFF , the fuel gauge and temperature gauge may not show accu- rate readings. When the engine is not r unning, turn the ignition switch to ON to obtain accurate readings. 2. Charging System Light This light [...]

7. Seat Belt Reminder Light A warning chime and an indicator light will alert you to buckle the seat belts. When the belt is buckled, the chime will stop, but the light will stay on for about six seconds, until it times out. Refer to “Occupant Restraints” in “Things T o Know Before Start- ing Y our V ehicle” for further information. 8. T ur[...]

1 1. Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low , or that there is a problem with the anti-lock brake system reservoir . If the light remains on when the [...]

W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have an accident. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD). In t[...]

13. Airbag W arning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is either not on during starting, stays on, or turns on while driving, then have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Things T o K[...]

18. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily . The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowe[...]

21. Odometer / T rip Odometer / ECO (Fuel Saver Indicator) Button Press this button to change the display fr om odometer to either of the two trip odometer settings or the “ECO” display . T rip A or T rip B will appear when in the trip odometer mode. Press and hold the button for two seconds to reset the trip odometer to 0 miles or kilome- ters[...]

maintain correct tir e pressur e, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly . The TPMS malfunction indicator is combined with the low tire pr essure tel[...]

24. Odometer / T rip Odometer Display Area The odometer shows the total distance the vehicle has been driven. The trip odometer shows individual trip mileage. Refer to “Odometer / T rip Odometer / ECO (Fuel Saver Indicator) Button” for additional information. U.S. Federal regulations r equire that upon transfer of vehicle ownership, the seller [...]

The ECO display will toggle between ECO and ECO-ON depending on driving habits and vehicle usage. Press the Odometer / T rip Odometer / ECO (Fuel Saver Indicator) button to change the display from odometer to either of the two trip odometer settings or the “ECO” display . LoW tirE When the appropriate condition exists, the odometer display will[...]

gASCAP If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “gASCAP” message will display in the odometer display area. T ighten the fuel filler cap properly and pr ess the TRIP ODOMETER button to turn of f the message. If the problem continues, the message will appear the next time [...]

1. T urn the ignition switch to the ON position (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary r epeat this[...]

W ARNING! A malfunctioning catalytic converter , as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants or wood or cardboard, etc. This could result in death or serious injury to the driver , occu- pants or others. 26. Ele[...]

W ARNING! The Electronic Stability Control (ESC) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent acci- dents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. Only a safe,[...]

W ARNING! If a warning light remains on the system may not be working and you will not have the benefit of ESP or BAS. Under certain driving conditions, where ESP or BAS would be beneficial, you - if you have not adjusted your driving speeds and stopping in or to account for the lack of the feature, may be in acci- dent. 30. Electronic Throttle Con[...]

32. Compass / Mini-T rip Computer Button—If Equipped Press this button to switch between the dif ferent functions. COMP ASS AND TRIP COMPUTER — IF EQUIPPED The Compass/T rip Computer is located in the instru- ment cluster . It features a driver -interactive display (dis- plays information such as outside temperature, compass direction, and trip[...]

displayed temperature, ther efore temperatur e readings are not updated when the vehicle is not moving. Press and r elease the left button (on the instrument cluster) to access the computer displays. Press and hold the left button (on the instr ument cluster) for two to three seconds to switch fr om English to Metric displays. Reset / Change Displa[...]

T rip Odometer (ODO) / ECO (Fuel Saver Indicator) — If Equipped This display shows the distance traveled since the last reset. Pr ess and release the right button (on the instr u- ment cluster) to switch from odometer , to T rip A or T rip B, or to ECO. Press and hold the right button while the odometer/trip odometer is displayed to reset. T rip [...]

W ARNING! Even if the display still reads a few degrees above 32°F ( 0°C), the road surface may be icy , particularly in woods or on bridges. Drive carefully under such conditions to prevent an accident and possible per- sonal injury or property damage. Compass Calibration The compass on your vehicle will automatically calibrate when new , and wi[...]

Manual Compass Calibration NOTE: Before attempting a manual compass calibra- tion, the engine must be running and the transmission in the P ARK position (if equipped). If the compass appears erratic or inaccurate and the variance has been properly set, you may wish to manu- ally recalibrate the compass. T o manually calibrate the compass: 1. First [...]

Setting the Compass V ariance Refer to the variance map for the correct compass vari- ance zone. T o check the variance zone, the ignition must be ON. Press and hold the left button (located on the instrument cluster) for appr oximately 10 seconds to enter the variance mode and release the button when the V AR symbol appears. The current variance v[...]

Outside T emperature If the outside temperature is mor e than 131°F (55°C), the display will show 131°F (55°C). When the outside tem- perature is less than ⫺ 40°F ( ⫺ 40°C), the display will show ⫺ 40°F ( ⫺ 40°C). MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code [...]

Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping. T urning the ON/VOLUME control knob to the right incr eas[...]

If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith Uconnect” message will display on the radio screen. TIME Button Press the TIME button to alternate locations of the time and frequency display . Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust t[...]

Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decr ease the bass tones. Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or d[...]

Program T ype 16-Digit Character Dis- play No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Program T ype 16-Digit Character Dis- play Rh[...]

If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset station. SETUP Button Pressing the SETUP button allows you to select between the following items: NOTE: T urn the TUNE/SCROLL contr ol knob to scroll through the entries. Push the AUDIO/SELECT butt[...]

• VES™ Power - Allows you to turn VES™ ON and OFF (if equipped). • VES™ Lock - Locks out rear VES™ r emote controls (if equipped). • VES™ CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2 wireless headphones by pressing the AUDIO/SELECT button (if equipped). • Set Home Clock - Pressing the SELECT button allows [...]

Subtitle Language — If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). Y ou can select a language not listed by scrolling down and selecting ⬙ other . ⬙ Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number a[...]

and press and r elease that button. If a button is not selected within five seconds after pressing the SET but- ton, the station will continue to play but will not be stored into pushbutton memory . Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET button twice and SET 2 will show[...]

CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components. NOTE: The ignition switch must be in the ON or ACC position to operate th[...]

The disc can be ejected with the radio and ignition OFF . SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD. Press the left SEEK button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first second of the current selection. Pr essing [...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats[...]

When using the MP3/WMA encoder to compress audio data to an MP3/WMA file, the bit rate and sampling frequencies in the following table ar e supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specifi- cation Sampling Fre- quenc[...]

• Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. T o create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST[...]

Pressing the AUX button will change the mode to auxil- iary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode[...]

Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Y our V ehicle”. Operating Instructions - Uconnect™ Multimedia (Satellite Radio) (If Equipped) Refer to “Uconnect™ Multimedia (Satellite Radio)”. Operating Instructions - V ideo Entertainment System (VES)™ (If Eq[...]

The REN, RER and RBZ radios contain a CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional. The 6.5 in (16.5 cm) touch screen allows for easy menu selection. The RER radio also contains a Global Positioning System (GPS)-based Navigation system. Refer to your Uconnect™ Multimedia REN, RER or RBZ user’s[...]

5. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. The clock setting m[...]

want to select, touch the screen wher e the word “Page” is displayed to view additional time zones in the menu. 5. T ouch the screen wher e the word “Save” is displayed. Clock Setting Procedure — RER/REN Radio Uconnect 威 gps — RER Only The GPS receiver used in this system is synchr onized to the time data being transmitted by the GPS [...]

2. T ouch the screen wher e “User Clock” is displayed, the clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen wher e the words “Daylight Savings” ar e dis- played to change the current setting. Show T ime if Radio is Off Wh[...]

MEDIA CENTER 130 (RES) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME contro[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. TIME Button [...]

Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL contr ol knob a third time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the treb[...]

Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in[...]

If you insert a disc with the ignition ON/RUN and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only . The use [...]

TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press and hold the FF (Fast Forwar d) button and the CD player will begin to fast forward until FF is r eleased, or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM/FM Butt[...]

The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a numb[...]

rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rate. MPEG Specifi- cation Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 8[...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers. Pressing the DISC/AUX button will change the mode to auxiliar[...]

Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns conti[...]

Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone featur e (if equipped). Refer to “Uconnect™ Phone” in “Under- standing The Features If Y our V ehicle”. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith Uconnect” message will di[...]

INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in e[...]

Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do[...]

Program T ype 16-Digit Character Dis- play Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype func[...]

window . Select the button (1–6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory . Y ou may add a second station to each pushbutton by repeating the above pr oce[...]

Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded. If[...]

NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first second of [...]

Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 an[...]

Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer [...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and pla[...]

radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.com, or at www- .siriuscanada.ca for Canadian residents. Electronic Serial Number/Siri[...]

Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent [...]

additional three seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arr ows. TUNE Control (Rotary) T urn the rotary TUNE/SCROLL control knob clockw[...]

SET Button – T o Set the Pushbutton Memory When you are r eceiving a channel that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this channel and press and r elease that button. If a button is not selected within five seconds afte[...]

System Activation Sirius Satellite Radio service is pre-activated and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account. Fo[...]

Next, turn the knob surrounding the joystick in the center of the radio to scroll to Subscription, and then pr ess and release the joystick. All of the ESNs that apply to your vehicle will display . Selecting Uconnect™ Multimedia (Satellite) Mode Press the SA T button until ⬙ SA T ⬙ appears in the display . A CD may remain in the radio while [...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it. SCAN Button (When Eq[...]

T oggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will [...]

Y ou may add a second channel to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory . The channels stored in SET 2 memory can be sele[...]

6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatur es may become too high. NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before[...]

Mode Control The mode control allows you to choose from several pat- terns of air distribution as identified by the symbols. Panel Air is directed thr ough the outlets in the instrument panel. These outlets can be adjusted to direct airflow . Bi-Level Air is directed thr ough the panel and floor outlets. NOTE: There is a dif ference in temperatur e[...]

Defrost Air is directed thr ough the windshield and side window demist outlets. Use this mode with maxi- mum fan and temperature settings for best windshield and side window defrosting. Blower Control Use this control (center r otary knob) to regulate the amount of air forced thr ough the system in any mode you select. The fan speed increases as yo[...]

The instrument panel featur es four airflow registers. T wo registers ar e located on the outer ends of the instrument panel and two are located in the center of the instr ument panel. These registers can be closed to partially block airflow , and they can be adjusted to direct airflow where the occupant desires. Mode Control The mode control allow[...]

Mix Air is directed thr ough the floor , defrost and side window demist outlets. This setting works best in cold or snowy conditions that requir e extra heat at the windshield. This setting is good for maintaining comfort while reducing moistur e on the windshield. Defrost Air is directed thr ough the windshield and side window demist outlets. Use [...]

NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C con- denser: located in front of the radiator , for an accumula- tion of dirt or insects. Clean with a gentle water spray from behind the radiator and thr ough the condenser . Fabric front fascia pr otectors may reduce air flow to the condenser , reduci[...]

Air Conditioning Normal Operation Press this button to engage the air conditioning. A light will illumi- nate when the air conditioning system is engaged. Once the air conditioning is engaged, use a combination of the mode control, fan speed control, and tempera- ture contr ol to achieve your de- sired interior temperatur e. NOTE: The air condition[...]

Operating Tips W indow Fogging W indows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases turning on the air-conditioning (pr essing the snowflake button) will clear the fog. Adjust the temperature contr ol, air direction and blower speed to [...]

When using the air conditioner in extremely heavy traf fic in hot weather especially when towing a trailer , addi- tional engine cooling may be requir ed. If this situation is encountered, operate the transmission in a lower gear to increase engine RPM, coolant flow and fan speed. When stopped in heavy traffic, it may be necessary to shift into NEU[...]

[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 3 3 1 ▫ Manual T ransmission – If Equipped ....... 3 3 1 ▫ Automatic T ransmission – If Equipped ..... 3 3 1 ▫ Normal Starting ..................... 3 3 1 ▫ Extreme Cold W eather (Below –20°F Or –29°C) ............................ 3 3 2 ▫ If Engine F[...]

▫ Automatic T ransmission W ith Overdrive .... 3 4 1 䡵 Four–Wheel Drive Operation (Command- T rac I 威 Or Rock-T rac 威 ) — If Equipped ....... 3 4 5 ▫ Operating Instructions/Pr ecautions ....... 3 4 5 ▫ Shift Positions ...................... 3 4 7 ▫ Shifting Procedur e ................... 3 4 8 䡵 T rac-Lok 威 Rear Axle — If Eq[...]

䡵 Anti-Lock Brake System ................. 3 7 1 䡵 Electronic Brake Contr ol System ........... 3 7 3 ▫ Anti-Lock Brake System (ABS) ........... 3 7 3 ▫ T raction Control System (TCS) ........... 3 7 4 ▫ Brake Assist System (BAS) .............. 3 7 4 ▫ Hill Start Assist (HSA) ................ 3 7 5 ▫ Electronic Roll Mitigation (ERM) .[...]

▫ Base System ........................ 4 0 8 ▫ General Information .................. 4 1 1 䡵 Fuel Requirements ..................... 4 1 1 ▫ Reformulated Gasoline ................ 4 1 2 ▫ Gasoline/Oxygenate Blends ............. 4 1 2 ▫ E-85 Usage In Non-Flex Fuel V ehicles ...... 4 1 3 ▫ MMT In Gasoline .................... 4 1 3 ▫[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children in the vehicle alone. Leaving unintended children in a vehicle is dangerous for a number of reasons. The child or others could be seriously or fatally injured. The child could operat[...]

T urn the ignition switch to the ST ART position and release when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedur e. T ip Start Feature – Automatic T ransmission Only T urn the ignition switch to the ST ART posit[...]

W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Unburned fuel could enter the catalytic converter and, once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a dis- charged battery , booster ca[...]

If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released. If this occurs, continue cranking with the accel- erator pedal pushed all the way to the floor . Release the accelerator pedal and the key once the engine is running smoothly . If the engine shows no sign of starting after tw[...]

ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 V olt AC electrical outlet with a grounded, thr ee-wire extension cor d. The engine block heater cord is found under the hood bundled in fr ont of the battery tray . W ARNING! Remember [...]

NOTE: During cold weather , you may experience in- creased ef fort in shifting until the transmission fluid warms up. This is normal. Shifting Fully press the clutch pedal befor e shifting gears. As you release the clutch pedal, lightly pr ess the accelerator pedal. Y ou should always use 1st gear when starting from a standing position if under hea[...]

Manual T ransmission Shift Speeds in MPH (KM/H) En- gine Speeds 1 to 2 2 to 3 3 to 4 4 to 5 5 to 6 3.8L Accel. 15 (24) 24 (39) 34 (55) 47 (76) 56 (90) Cruise 10 (16) 19 (31) 27 (43) 37 (60) 41 (66) Downshifting Moving from a high gear down to a lower gear is recommended to pr eserve brakes when driving down steep hills. In addition, downshifting at[...]

Maximum Recommended Downshift Speeds CAUTION! Failure to follow the maximum recommended down- shifting speeds may cause the engine to overspeed and/or damage the clutch disc, even if the clutch pedal is pressed. Manual T ransmission Downshift Speeds in MPH (KM/H) Gear Selec- tion 6t o5 5t o4 4t o3 3t o2 2t o1 Maxi- mum Speed 80 (129) 70 (1 13) 50 ([...]

AUTOMA TIC TRANSMISSION — IF EQUIPPED CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REV[...]

Brake/T ransmission Interlock System This vehicle is equipped with a Brake T ransmission Shift Interlock System (BTSI) that holds the shift lever in the P ARK position when the ignition switch is in the LOCK position. T o move the shift lever out of the P ARK position, the ignition switch must be turned to either the ON or ST AR T position (engine [...]

6. Press the shifter release button and shift into NEU- TRAL. 7. The vehicle may then be started in NEUTRAL. Have your vehicle inspected by your local authorized dealer if the shift lock manual override has been used. Automatic T ransmission with Overdrive Shifting from DRIVE to P ARK or REVERSE (or from P or R to D) should be done only after the a[...]

Gear Ranges NOTE: Under extreme cold temperatur es (-10°F (-23°C) and when in DRIVE, transmission operation may be briefly limited to only second gear operation. Normal operation will resume once the transmission temperatur e has risen to a suitable level. DO NOT race the engine when shifting from P ARK or NEUTRAL position into another gear range[...]

NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. NOTE: T owing, coasting, or driving the vehicle for any other reason with the shift lever in NEUTRAL can result in severe transmission damage. Refer to “Recr eat[...]

Overdrive can be locked out by pr essing the O/D OFF switch located on the center console. The “O/D OFF Indicator Light” (on the switch) will illuminate to show that the switch has been activated. When the indicator light is on, Overdrive is locked out. Pr essing the switch a second time restor es the Overdrive function. The lockout feature is [...]

CAUTION! • Before moving the shift lever out of P ARK, you must turn the ignition from LOCK so the steering wheel and shift lever are released. Otherwise, damage to the steering column or shift lever could result. • Never race the engine with the brakes on and the vehicle in gear , and never hold the vehicle on an incline without applying the b[...]

• 4L (Four-wheel drive low range) The transfer case is intended to be driven in the 2H position for normal street and highway conditions such as hard-surfaced r oads. In the event that additional traction is requir ed, the transfer case 4H and 4L positions can be used to lock the front and r ear driveshafts together , forcing the fr ont and rear [...]

NOTE: Do not attempt to shift when only the front or rear wheels ar e spinning. The transfer case is not equipped with a synchronizer , and the front and rear driveshaft speeds must be equal for a shift to take place. Shifting while only the front or r ear wheels are spinning can cause damage to the transfer case. When operating your vehicle in 4L,[...]

4H Position This range locks the front and r ear driveshafts together , forcing the fr ont and rear wheels to r otate at the same speed. This range (4H) provides additional traction for loose, slippery road surfaces and should not be used on wet or dry pavement. The “4WD Indicator Light” (located in the instrument cluster) will illuminate when [...]

4H to 4L or 4L to 4H W ith the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift an automatic transmission into NEUTRAL (N), or press the clutch pedal on a manual transmission. While the vehicle is coasting at 2 to 3 mph (3 to 5 km/h), shift the transfer case lever firmly to the desired position. Do not pause with the transfer case in N (Neutral).[...]

T rac-Lok 威 is especially helpful during slippery driving conditions. W ith both rear wheels on a slippery surface, a slight application of the accelerator will supply maxi- mum traction. W ARNING! On vehicles equipped with a limited-slip differen- tial, never run the engine with one rear wheel off the ground. The vehicle may drive through the re[...]

T o activate the system, press the bottom of the AXLE LOCK switch once to lock the rear axle only (the “Rear Axle Lock Indicator Light” will illuminate), press the bottom of the switch again to lock the front axle (the “Front Axle Lock Indicator Light” will illuminate). When the rear axle is locked, pr essing the switch again will lock or u[...]

The rear axle lock will disengage if the vehicle is taken out of 4L (Low) range, or the ignition switch is turned to the LOCK position. ELECTRONIC SW A Y BAR DISCONNECT — IF EQUIPPED Y our vehicle may be equipped with an electronic discon- necting stabilizer/sway bar . This system allows greater front suspension travel in of f-road situations. Th[...]

when activation conditions are not met. The stabilizer/ sway bar should remain in on-r oad mode during normal driving conditions. W ARNING! Do not disconnect the stabilizer bar and drive on hard-surfaced roads or at speeds above 18 mph (29 km/h); you may lose control of the vehicle, which could result in serious injury . The front stabilizer bar en[...]

W ARNING! If the stabilizer/sway bar will not return to on-road mode, vehicle stability is greatly reduced. Do not attempt to drive the vehicle over 18 mph (29 km/h). Driving faster than 18 mph (29 km/h) may cause loss of control of the vehicle, which could result in serious injury . Contact your local authorized dealer for assistance. ON-ROAD DRIV[...]

1. Remove the two nuts from the bodyside. 2. Remove one bolt from the underside of the vehicle. 3. Remove the side step assembly . 5 ST ARTING AND OPERA TING 355[...]

The Basics of Off-Road Driving Y ou will encounter many types of terrain driving off- road. Y ou should be familiar with the terrain and area before pr oceeding. There ar e many types of surface conditions: hard-packed dirt, gravel, r ocks, grass, sand, mud, snow and ice. Every surface has a differ ent effect on your vehicle’s steering, handling [...]

is needed. V ehicle speeds in excess of 25 mph (40 km/h) should be avoided when in 4L (Low) range. Simultaneous Brake and Throttle Operation Many off-r oad driving conditions requir e the simulta- neous use of the brake and throttle (two-footed driving). When climbing rocks, logs, or other stepped objects, using light brake pressur e with light thr[...]

previous vehicles getting stuck. As a good practice before entering any mud hole, get out and determine how deep it is, if there ar e any hidden obstacles and if the vehicle can be safely recover ed if stuck. Sand Soft sand is very difficult to travel thr ough with full tire pressur e. When crossing soft, sandy spots in a trail, maintain your vehic[...]

W ARNING! Crossing obstacles can cause abrupt steering system loading which could cause you to loose control of your vehicle. Using a Spotter There ar e many times where it is har d to see the obstacle or determine the correct path. Determining the corr ect path can be extremely dif ficult when you are confr onting many obstacles. In these cases, h[...]

enough to put the vehicle at risk of a rollover . If you get caught in a rut, dig a small tr ench to the right or left at a 45-degree angle ahead of the fr ont tires. Use the r emoved dirt to fill the rut ahead of the turnout you just cr eated. Y ou should now be able to drive out following the trench you just created at a 45-degr ee angle. W ARNIN[...]

CAUTION! W inching or rocking the vehicle off hard objects increases the risk of underbody damage. Hill Climbing Hill climbing requir es good judgment and a good under- standing of your abilities and your vehicle’s limitations. Hills can cause serious problems. Some ar e just too steep to climb and should not be attempted. Y ou should always feel[...]

provide a fr esh ⬙ bite ⬙ into the surface and will usually provide enough traction to complete the climb. If you do not make it to the top, place the vehicle in REVERSE and back straight down the grade using engine resistance along with the vehicle brakes. W ARNING! Never attempt to climb a hill at an angle or turn around on a steep grade. Dri[...]

W ARNING! Driving across an incline increases the risk of a rollover , which may result in severe injury . If Y ou Stall or Begin to Lose Headway If you stall or begin to lose headway while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brake. Restart the engine and shift into REVERSE. Back slowly down the hil[...]

your vehicle’s abilities and be able to recover it if something goes wrong. Y ou should never stop or shut a vehicle off when cr ossing deep water unless you ingested water into the engine air intake. If the engine stalls, do not attempt to restart it. Determine if it has ingested water first. The key to any crossing is low and slow . Shift into [...]

muddy waters; check for hidden obstacles. Make sure you will not be intruding on any wildlife, and you can recover the vehicle if necessary . The key to a safe crossing is the water depth, current and bottom conditions. On soft bottoms, the vehicle will sink in, effectively incr easing the water level on the vehicle. Be sure to consider this when d[...]

the slowest current can push the heaviest vehicle down- stream and out of contr ol if the water is deep enough to push on the large surface ar ea of the vehicle’s body . Before you pr oceed, determine the speed of the current, the water’s depth, approach angle, bottom condition and if there ar e any obstacles. Then cross at an angle heading sli[...]

• After extended operation in mud, sand, water , or similar dirty conditions, have the radiator , fan, brake rotors, wheels, brake linings, and axle yokes inspected and cleaned as soon as possible. W ARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. Y ou might not have full braking power when y[...]

system. This noise should be considered normal, and it does not in any way damage the steering system. W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel [...]

If necessary , add fluid to restore to the pr oper indicated level. W ith a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. P ARKING BRAKE Before leaving the vehicle, make sur e that the parking brake is fully applied. Also, be c[...]

NOTE: • When the parking brake is applied and the automatic transmission is placed in gear , the “Brake W arning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver . Fully release the parking brake before attempting to move the vehicle. • This light only shows that the parking brake is ap- plied. It does[...]

W ARNING! (Continued) • Always fully apply the parking brake when leav- ing your vehicle or it may roll and cause damage or injury . Also, be certain to leave an automatic transmission in P ARK, a manual transmission in REVERSE or first gear . Failure to do so may cause the vehicle to roll and cause damage or injury . CAUTION! If the “Brake W a[...]

The Anti-Lock Brake System pump motor runs during the self-test, and during an ABS stop, to provide the regulated hydraulic pr essure. The motor pump makes a low humming noise during operation; this is normal. W ARNING! • Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an accident. Pumping makes the stopping dist[...]

NOTE: During severe braking conditions, a pulsing sensation may occur and a clicking noise will be heard. This is normal, indicating that the Anti-Lock Brake System is functioning. ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system that includes Anti-Lock Brake Sys- tem (ABS), T raction Contro[...]

T raction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) to provide enhanced acceleration and stability . A feature of the TCS system functions similar to a limited slip differ ential and controls the wheel spin acr oss a[...]

W ARNING! The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. The capabilities of a[...]

HSA Activation Criteria The following criteria must be met in order for HSA to activate: • V ehicle must be stopped • V ehicle must be on an 8% or greater incline (3% for manual transmission equipped vehicles) • Gear selection matches vehicle uphill direction (i.e., vehicle facing uphill is in forward gear; vehicle back- ing uphill is in REVE[...]

letting gravity act on the vehicle, as the HSA will prevent the vehicle from r olling. Instead, use the appropriate gear for moving in the desired dir ection. T owing with HSA HSA will pr ovide assistance when starting on a grade when pulling a trailer . W ARNING! • If you use a trailer brake controller with your trailer , your trailer brakes may[...]

W ARNING! (Continued) • HSA is not a parking brake. If you stop the vehicle on a hill without putting the transmission in P ARK and using the parking brake, it will roll down the hill and could cause a collision with another vehicle or object. Always remember to use the parking brake while parking on a hill, and that the driver is responsible for[...]

speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicle’s speed are suf ficient to potentially cause wheel lift, it applies the appropriate brake and may r educe engine power to lessen the chance that wheel lift will occur . ERM will only intervene during very severe or evasive driving maneu- vers[...]

counteracting the over/under steer condition. Engine power may also be reduced to help the vehicle maintain the desired path. ESP uses sensors in the vehicle to determine the vehicle path intended by the driver and compares it to the actual path of the vehicle. When the actual path does not match the intended path, ESP applies the brake of the appr[...]

range. T wo-wheel drive vehicles and four-wheel drive vehicles in 2H range have two operating modes. 4H Range (4WD Models) or 2WD Models On This is the normal operating mode for ESP in 4H and 2WD vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted from 4L range or NEUTRAL back to 4H range, the ESP system will be [...]

gravel, it may be desirable to switch to the “Partial Off” mode by pressing the ESP OFF switch. Once the situation requiring ESP to be switched to the “Partial Off” mode is overcome, turn ESP back on by momentarily pressing the ESP OFF switch. This may be done while the vehicle is in motion. ESP Off (4H Range Only) This mode is intended for[...]

W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for off-road use only . 4L Range (4WD Models) ESP Of f This is the normal operating mode [...]

W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP and ERM are unavailable. In an emergency evasive maneuver , the ESP and ERM systems will not engage to assist in maintaining stability . The “Full Off” mode is intended for off- road use only . Disabling ESP for Modified V ehicles (4WD Models Only) V ehicles mod[...]

The following procedur e will disable (or re-enable) ESP functionality in the vehicle: 1. Shift the transfer case into the 4H range position. 2. T urn the steering wheel until it is centered and the wheels are pointed straight ahead. 3. Cycle the ignition key OFF to ON. 4. W ait approximately five seconds for the system bulb check. 5. T urn and hol[...]

If the “ESP/BAS W arning Light” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system, or both. If this light remains on after several ignition cycles, and the vehicle has been driven several miles/kilometers at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon [...]

W ARNING! If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway . TIRE SAFETY INFORMA TION Tire Markings 1 — U.S. DOT Safety Stan- dards Code (TIN) 4 — Maximum Load 2 — Size Designation 5 — Maximum Pressur e 3 — Service Description 6 — T readwear ,[...]

NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the side[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger Car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger Car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = As[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.[...]

Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof. Cold T ire Pressure Cold tire inflation pr essure is defined as the tir e pressur e after the vehicle has not been driven for at le[...]

Tire Loading and T ire Pressure T ire Placard Location T ire Placard Location (T wo-Door Models) T ire Placard Location (Four-Door Models) 5 ST ARTING AND OPERA TING 393[...]

T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es. Loading The vehicle maximum load on the tire mus[...]

combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) should never exceed the weight refer enced here. Steps for Determining Correct Load Limit 1. Locate the statement “The combined weight of occu- pants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight[...]

396 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under-inflation also incr eases tire r olling resistance and r esults in higher fuel consumption. Ride Comfort and V ehicle Stability Proper t[...]

T ire pressur e should be checked and adjusted as well as inspected for signs of tire wear or visible damage, at least once a month. Use a good quality pocket-type gauge to check tire pr essure. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under-inflated. CAUTION! Aft[...]

T ire pressur es change by approximately 1 psi (7 kPa) per 12° F (7° C) of air temperature change. Keep this in mind when checking tire pr essure inside a garage, especially in the W inter . Example: If garage temperature = 68° F (20° C) and the outside temperature = 32° F (0° C) then the cold tir e inflation pressur e should be increased by [...]

Radial-Ply Tires W ARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly . The instability could cause an accident. Al- ways use radial tires in sets of four . Never combine them with other types of tires. Cuts and punctures in radial tir es are r epairable only in the tread ar ea beca[...]

T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tir e sh[...]

W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death. Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Pr ote[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

These effects can be r educed by timely rotation of tir es. The benefits of rotation ar e especially worthwhile with aggressive tr ead designs such as those on On/Off Road type tires. Rotation will incr ease tread life, help to main- tain mud, snow , and wet traction levels, and contribute to a smooth, quiet ride. Refer to “Maintenance Schedule?[...]

TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressur e Monitoring System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recommended cold placar d pressur e. The tire pr essure will vary with temperatur e by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decr eases, the tire pr[...]

For example, your vehicle may have a recommended cold (parked for more than thr ee hours) air pressur e of 35 psi (241 kPa). If the ambient temperature is 68°F (20°C) and the measured tir e pressur e is 30 psi (207 kPa), a temperature dr op to 20°F (-7°C) will decrease the tir e pressur e to approximately 26 psi (179 kPa). This tir e pressur e [...]

NOTE: • The TPMS is not intended to replace normal tir e care and maintenance, nor to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failur e. Under-[...]

• T ire Pressur e Monitoring T elltale Light A tire pr essure monitoring sensor is located in the spar e wheel if the vehicle is equipped with a matching full size spare wheel and tir e assembly . The matching full size spare tir e can be used in place of any of the four road tires. A low spare tire will not cause the “T ire Pr essure Monitorin[...]

5. Using wheels/tires not equipped with TPM sensors. NOTE: • If your vehicle is equipped with a matching full-size spare wheel and tir e assembly , it has a tire pressur e monitoring sensor , and can be monitored by the T ire Pressur e Monitoring System (TPMS). In the event that the matching full-size spare tir e is swapped with a low pressur e r[...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed operation. The tire pr essure sensors ar[...]

Over 40 auto manufacturer’s worldwide have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC) to define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer r ecom- mends the use of gasoline that meets the WWFC speci- fications if they ar[...]

E-85 Usage In Non-Flex Fuel V ehicles Non-FFV vehicles are compatible with gasoline contain- ing 10% ethanol (E10). Gasoline with higher ethanol content may void the vehicle’s warranty . If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfunc[...]

It is even more important to look for gasoline without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and California- reformulated gasoline. Materials Added T o Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of add[...]

CAUTION! (Continued) • The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentra- tions of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer . NOTE: Intentional t[...]

W ARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly . Until repaired, drive with all side windows fully open. • Keep the swing gate closed when driving your vehicle to prevent carbon monoxide and other [...]

CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “Malfunction Indi- cator Light (MIL)” to illuminate, due to fuel vapors escaping from the system. • T o[...]

Loose Fuel Filler Cap Message After fuel has been added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improperly installed, or damaged. If the system detects a malfunction, the “gASCAP” message will display in the odometer display . T ighten the gas cap until a ⬙ clicking ⬙ sound is heard. This is an[...]

Payload The payload of a vehicle is defined as the allowable load weight a truck or any given vehicle can carry , including the weight of the driver , all passengers, options and cargo. Gross Axle W eight Rating (GA WR) The GA WR is the maximum permissible load on the front and rear axles. The load must be distributed in the car go area so that the[...]

Loading The actual total weight and the weight of the front and rear of your vehicle at the gr ound can best be determined by weighing it when it is loaded and ready for operation. The entire vehicle should first be weighed on a commer - cial scale to ensure that the GVWR has not been ex- ceeded. The weight on the front and r ear of the vehicle sho[...]

T o maintain warranty coverage, follow the requirements and recommendations in this Owner’s Manual concern- ing vehicles used for trailer towing. Common T owing Definitions The following trailer towing-related definitions will as- sist you in understanding the following information: Gross V ehicle W eight Rating (GVWR) The GVWR is the total allow[...]

W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T railer T ongue W eight (TW) The trailer tongue weight is the downward for ce exerted on the hitch ball by the trailer . In most cases [...]

W eight-Distributing Hitch A weight-distributing hitch system works by applying leverage through spring (load) bars. It is typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufactur ers’ directions, it provides for a mor e level ride,[...]

T railer Hitch Classification The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the T railer T owing W eights (Maximum T railer W eight Ratings) chart for the Max. [...]

Engine/ T ransmission Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.8L/Manual 3.21 T wo–Door X Model (4WD) 5,049 lbs (2 290 kg) 25 sq ft (2.32 sq m) 1,000 lbs (453 kg) 100 lbs (45 kg) 3.8L/Manual 3.73 T wo–Door X Model (4WD) 6,049 lbs (2 744 kg) 25 sq ft (2.32 sq m)[...]

Engine/ T ransmission Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.8L/ Automatic 3.73 Four–Door X Model (2WD) 7,734 lbs (3 508 kg) 32 sq ft (2.97 sq m) 3,500 lbs (1 587 kg) 350 lbs (159 kg) 3.8L/ Automatic 3.73 Four–Door Sahara Model (2WD) 7,893 lbs (3 580 kg) 32 s[...]

Engine/ T ransmission Axle Model GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.8L/Manual 4.10 Four–Door Rubicon Model (4WD) 8,248 lbs (3 741 kg) 32 sq ft (2.97 sq m) 3,500 lbs (1 587 kg) 350 lbs (159 kg) 3.8L/ Automatic 4.10 Four–Door Rubicon Model (4WD) 8,249 lbs (3 742 kg) 3[...]

Consider the following items when computing the weight on the rear axle of the vehicle: • The trailer tongue weight. • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, ad[...]

CAUTION! • Do not tow a trailer at all during the first 500 miles (805 km) the new vehicle is driven. The engine, axle or other parts could be damaged. • Then, during the first 500 miles (805 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. This helps the engine and other parts of the vehi[...]

W ARNING! (Continued) • V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P ARK. W ith a manual transmis- sion, shift the transmission into first gear . And with four-wheel-drive vehicles, make sure the transfer case is not in N (Neutral[...]

− Check for signs of tire wear or visible tir e damage before towing a trailer . Refer to “T ires – General Information” in “Starting and Operating” for the proper inspection pr ocedure. − When replacing tir es, refer to “T ires – General Infor - mation” in “Starting and Operating” for proper tir e replacement pr ocedures. R[...]

W ARNING! • Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. Y ou might not have brakes when you need them and could have an accident. • T owing any trailer will increase your stopping distance. When towing, you should allow for ad- ditional space between your vehic[...]

T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in first gear to avoid excessive clutch slippage. Automatic T ransmission The DRIVE range can be selected when towing. How- ever , if frequen[...]

The automatic transmission fluid and filter should be changed if you REGULARL Y tow a trailer for more than 45 minutes of continuous operation. Refer to “Mainte- nance Schedule” for the proper maintenance intervals. NOTE: Check the automatic transmission fluid level before towing. O/D Off T o reduce the potential for automatic transmission over[...]

RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) CAUTION! Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. T wo-Wheel Drive Models Recreational towing is allowed ONL Y if the rear drive- shaft is removed. See your authorized dea[...]

Four-Wheel Drive Models NOTE: The transfer case must be shifted into N (Neu- tral), automatic transmission must be shifted into P ARK, and manual transmission must be placed in gear (not in NEUTRAL) for recr eational towing. Shifting Into Neutral (N) W ARNING! Y ou or others could be injured if you leave the vehicle unattended with the transfer cas[...]

7. Release the brake pedal and ensure that there is no vehicle movement. 8. T urn the engine off and turn the ignition switch to the ACC position. 9. Shift the automatic transmission into P ARK. 10. Apply the parking brake. 1 1. Attach the vehicle to the tow vehicle with the tow bar . 12. Release the parking brake. 13. Disconnect the negative batte[...]

3. Shift the transfer case lever into the desired position. 4. Start the engine. 5. Shift the automatic transmission into DRIVE or release the clutch on manual transmissions. NOTE: When shifting out of transfer case N (Neutral) on automatic transmission-equipped vehicles, turning the engine off may be r equired to avoid gear clash. CAUTION! • Do [...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 4 4 0 䡵 If Y our Engine Overheats ................ 4 4 0 䡵 Jacking And T ire Changing ............... 4 4 2 ▫ Jack Location ....................... 4 4 2 ▫ Spare T ire Stowage ................... 4 4 3 ▫ Preparations For Jacking ............... 4 4 3 ▫ Jac[...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the instrument panel below the climate contr ols. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency . Press the switch a second time to turn off [...]

NOTE: There ar e steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help r emove this heat. • Y ou can also turn the temperature control to maximum heat, the mode control to floor and the blowe[...]

JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack i[...]

Spare Tire Stowage T o remove the spare tir e from the carrier , remove the tir e cover , if equipped, and remove the lug nuts with the lug wrench turning them counter clockwise. NOTE: If you have added aftermarket accessories to the spare tir e mounted carrier , it cannot exceed a gross weight of 50 lbs (23 kg) including the weight of the spare ti[...]

Jacking Instructions W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly [...]

1. Remove the spare tire, jack and tools fr om the stored location. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 3. Assemble the jack and jacking tools. Connect the jack handle driver to the extension, then to the lug wrench. 4. Operate the jack from the front or the r[...]

W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7. Position the spare wheel/tire on the vehicle and install the lug nuts with the cone-shaped end toward [...]

pack. Jump-starting can be dangerous if done impr operly so please follow the procedur es in this section carefully . NOTE: When using a portable battery booster pack follow the manufacturer ’s operating instructions and precautions. CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than[...]

W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured. • Batteries contain su[...]

CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster batte[...]

8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery . 9. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the dischar ged vehicle. 10. Reinstall the air intake duct. If frequent jump-starting is r equired to start your vehicle you should have the battery [...]

CAUTION! T ow hooks are for emergency use only , to rescue a vehicle stranded off road. Do not use tow hooks for tow truck hookup or highway towing. Y ou could damage your vehicle. T ow straps are recommended when towing the vehicle, chains may cause vehicle damage. TOWING A DISABLED VEHICLE The manufacturer r equires towing your vehicle with all f[...]

[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.8L ............. 4 5 5 䡵 Onboard Diagnostic System — OBD II ...... 4 5 6 ▫ Loose Fuel Filler Cap Message ........... 4 5 6 䡵 Emissions Inspection And Maintenance Programs ............................ 4 5 7 䡵 Replacement Parts ..................... 4 5 8 䡵 Dealer Service ...[...]

▫ Brake System ....................... 4 7 6 ▫ Automatic T ransmission – If Equipped ..... 4 7 8 ▫ Hydraulic Clutch Fluid – Manual T ransmission ....................... 4 8 0 ▫ Manual T ransmission – If Equipped ....... 4 8 0 ▫ T ransfer Case – If Equipped ............. 4 8 1 ▫ Front/Rear Axle Fluid ................. 4 8 2 ▫ A[...]

ENGINE COMP ARTMENT — 3.8L 1 — Integrated Power Module 7 — W asher Fluid Reservoir 2 — Battery 8 — Engine Coolant Reservoir 3 — Automatic T ransmission Dipstick 9 — Air Cleaner Filter 4 — Engine Oil Fill 10 — Coolant Pressur e Cap 5 — Engine Oil Dipstick 1 1 — Power Steering Fluid Reservoir 6 — Brake Fluid Reservoir 7 MAINT [...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the prob- lem is detected twice in a row , the system will turn on the MIL. Resolving the problem will turn the MIL off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your ve[...]

a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will r emain fully illuminated until you turn OFF the ignition or s[...]

NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perfor[...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning. Such damage is not covered [...]

Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” for further information. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, whichever occurs first. Engine Oil Selection For best[...]

Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to “Engine Compart-[...]

Engine Oil Filter Selection All of the manufacturer’s engines have a full-flow type disposable oil filter . Use a filter of this type for replace- ment. The quality of replacement filters varies consider - ably . Only high quality filters should be used to assure most efficient service. MOP AR 威 engine oil filters are high quality oil filters a[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . Refer to “Jump-Starting Procedures” in “W[...]

Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in yo[...]

Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydr ofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency (EP A) and is an ozone-saving product. However , the manufacturer r ecommends that air condi- tioning service be performed by authorized dealers or other service facilities using recovery and[...]

remove fr ost or ice from the windshield. Keep the blade rubber out of contact with petr oleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depend- ing on geographical area and fr equency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots. If any condition i[...]

Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if the exhaust fumes can be detected inside the vehicle; or when the underside or rear of the vehicle is damaged; have an authorized technician inspect t[...]

CAUTION! • The catalytic converter requires the use of un- leaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emissions con- trol device and may seriously reduce engine per- formance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper o[...]

T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interr upt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagno[...]

garden hose vertically down the face of the A/C con- denser (if equipped) or the back of the radiator core. Check the engine cooling system hoses for brittle rubber , cracking, tears, cuts, and tightness of the connection at the coolant recovery bottle and radiator . Inspect the entire system for leaks. W ith the engine at normal operating temperat[...]

CAUTION! • Mixing of engine coolant (antifreeze) other than the specified HOA T engine coolant (antifreeze) may result in engine damage and may decrease corrosion protection. If a non-HOA T engine cool- ant (antifreeze) is introduced into the cooling system in an emergency , it should be replaced with the specified engine coolant (antifreeze) as [...]

Please review these r ecommendations for using Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze). When adding engine coolant (antifr eeze): • The manufacturer r ecommends using MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent. • Mix a minimum solution of 5[...]

W ARNING! The warning words DO NOT OPEN HOT on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the en- gine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove the pressu[...]

When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the fr ont of the engine compartment. This is nor- mally a result of moistur[...]

• Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions. Brake System In order to assur e brake system performance, all brake system components should be in[...]

W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also labeled on[...]

W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Automatic T ransmission – If Equipped Selection of Lubricant It is important that the proper lubricant is used in the transmission to as[...]

T o properly check the automatic transmission fluid level, the following procedur e must be used: 1. Operate the engine at idle speed and normal operating temperature. 2. The vehicle must be on level ground. 3. Fully apply the parking brake. 4. Place the shift lever momentarily into each gear posi- tion ending with the shift lever in P ARK. 5. Remo[...]

7. Check for leaks. Release the parking brake. NOTE: T o prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain that the dipstick cap is properly r eseated. It is normal for the dipstick cap to spring back slightly from its fully seated position, as long as its seal remains engaged in the dipstick t[...]

Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16 in (4.76 mm) below the bottom of the hole. Add fluid, if necessary , to maintain the proper level. Frequency of Fluid Change Under normal operating conditions, the fluid installed at the fac[...]

CAUTION! When replacing the plugs, do not overtighten them. Y ou could damage them and cause them to leak. Selection of Lubricant Use only manufacturer’s r ecommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Front/Rear Axle Fluid For normal service, periodic fluid lev[...]

road surfaces on which the vehicle is operated, extr eme hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under - body protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corr osion resistance built into your vehicle. What Causes Corrosion? Co[...]

• A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal [...]

• Use MOP AR 威 T ouch-Up Paint or equivalent on scratches or chips as soon as possible. Y our authorized dealer has touch-up paint to match the color of your vehicle. Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels, should be cleaned r egularly with a mild soap and water to prevent corr osion. [...]

CAUTION! When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully . Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface. Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOP AR 威 Glass Cleaner or any commercial [...]

Replace the belts if they appear frayed or worn or if the buckles do not work properly . Appearance Care for Fabric T op Models CAUTION! T o maintain the appearance of your vehicle’s interior trim and top, follow these precautions: • A void leaving your vehicle unattended with the top down, as exposure to sun or rain may damage interior trim. ?[...]

CAUTION! Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: • A void high-pressure car washes, as they can dam- age the top material. Also, increased water pres- sure may force past the weather strips. • It is recommended that the top be free of water prior to opening it. Operating the top, o[...]

Cleaner or equivalent will safely clean all plastic win- dows without scratching. It removes fine scratches to improve visibility and pr ovides UV protection to help prevent yellowing. 2. When washing, never use hot water or anything stronger than a mild soap. Never use solvents such as alcohol or harsh cleaning agents. 3. Always rinse thoroughly w[...]

FUSES T otally Integrated Power Module The T otally Integrated Power Module (TIPM) is located in the engine compartment near the battery . This center contains cartridge fuses, mini fuses and relays. A label that identifies each component is printed on the inside of the cover . Cavity Cartridge Fuse Mini Fuse Description J1 — — J2 30 Amp Pink T[...]

Cavity Cartridge Fuse Mini Fuse Description J9 40 Amp Green PZEV Sec Motor Feed/Flex Fuel J10 30 Amp Pink Headlamp W ash Relay/Manifold T un- ing V alve J1 1 30 Amp Pink Sway Bar J13 60 Amp Y ellow Ignition Off Draw (IOD) – Main J14 40 Amp Green EBL (Rear W indow Defogger) J15 30 Amp Pink Rear Blower J17 40 Amp Green Starter Solenoid Cavity Cartr[...]

Cavity Cartridge Fuse Mini Fuse Description M3 20 Amp Y ellow Frt/Rear Axle Locker Relay M4 — — M5 — — M6 20 Amp Y ellow Power Outlet #1/Rain Sensor M7 20 Amp Y ellow Power Outlet #2 (BA TT/ACC SELECT) M8 20 Amp Y ellow Front Heated Seat M9 20 Amp Y ellow Rear Heated Seat – If Equipped Cavity Cartridge Fuse Mini Fuse Description M10 20 Am[...]

Cavity Cartridge Fuse Mini Fuse Description M13 20 Amp Y ellow Ignition Off Draw – Cabin Compartment Node (IOD-CCN), W ireless Control Mod- ule (WCM), SIREN, Multifunction Control Switch (MUL TIFCTN SW) M14 20 Amp Y ellow T railer T ow (Export Only) Cavity Cartridge Fuse Mini Fuse Description M15 20 Amp Y ellow COL MOD, IR SNS, Heater V entilatio[...]

Cavity Cartridge Fuse Mini Fuse Description M16 10 Amp Red Occupant Restraint Controller (ORC) M17 15 Amp Blue Left T ail/License/Park Lamp (L T -T AIL/LIC/ PRK LMP) M18 15 Amp Blue Right T ail/Park/Run Lamp (R T -T AIL/PRK/ RUN LMP) M19 25 Amp Natural Auto Shut Down (ASD #1 and #2) M20 15 Amp Blue Cabin Compartment Node Interior Light (CCN INT LIG[...]

Cavity Cartridge Fuse Mini Fuse Description M30 15 Amp Blue W iper Motor Frt, J1962 Diagnostic Feed M31 20 Amp Y ellow Backup Lamps (B/U LAMPS) M32 10 Amp Red Occupant Restraint Controller (ORC), TT EUROPE M33 10 Amp Red Next Generation Con- troller (NGC), Global Powertrain Engine Controller (GPEC) Cavity Cartridge Fuse Mini Fuse Description M34 10[...]

Cavity Cartridge Fuse Mini Fuse Description M38 25 Amp Natural Lock/Unlock Motors (LOCK/UNLOCK MTRS) CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an elec[...]

• Or , disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, r un the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will ensure adequate system lubrication to minimize the possibility of compress[...]

BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmo- spheric conditions. This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor . T urning the lamps on will usually accelerate the clearing process. Headlamp 1. Open hood and support using prop rod. 2. Remove the front grille. T urn[...]

Front Park/T urn Signal 1. Remove the front grille. T urn the retainers along the top 1/4 turn counterclockwise and r emove. 2. Pull the bottom of the grille away starting at one side and working toward the other . 3. T urn the socket assembly 1/4 turn counterclockwise and remove fr om housing. Pull the bulb straight from the socket to replace. Fro[...]

Rear T ail, Stop, T urn Signal, and Backup Lamp 1. Remove the two inboard screws attaching the tail light housing to the body . DO NOT REMOVE THE OUTER SCREWS A T ANY TIME. 2. Separate the housing from the body by pushing the lamp inboard while pulling the lamp away fr om the body . 3. Rotate the appropriate socket 1/4 turn counterclock- wise, then[...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) — T wo Door Models 18.5 Gallons 70 Liters Fuel (Approximate) — Four Door Models 22.5 Gallons 85 Liters Engine Oil with Filter 3.8 Liter Engine 6 Quarts 5.7 Liters Cooling System * 3.8 Liter Engine (MOP AR 威 Antifreeze/Engine Coolant 5 Y ear/100,000 Mile Formula or equivalent) 13 Quarts 12 Liter[...]

FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to you[...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission – If Equipped MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Manual T ransmission – If Equipped MOP AR 威 Manual T ransmission Lubricant or equivalent (meeting the re- quirements of Chrysler Material Standar d MS-9224). T[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 5 0 6 䡵 Maintenance Schedule .................. 5 0 6 ▫ Required Maintenance Intervals .......... 5 0 8 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

• Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, which- ever comes first. Y our dealer will reset the oil change indicator message after completing the scheduled oil change. If this sched- ule[...]

Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for correct operation. At Ea[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front & rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler [...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. ❏ Change the manual transmission fluid if using your vehicle for any of the following: trailer[...]

36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary . ❏ Inspect the brake linings, replace if necessary . ❏ Inspect the [...]

48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary . ❏ Inspect the brake linings, replace if necessary . ❏ Inspect the [...]

60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings, replace if necessary . ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. ❏ Change the manual transmission fluid [...]

66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotat[...]

78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate[...]

90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect and replace PCV valve if necessary .† ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. ❏ Change the manual transmission fluid if[...]

96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary . ❏ Inspect the brake linings, replace if necessary . ❏ Inspect the[...]

108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter , replace if necessary . ❏ Inspect the brake linings, replace if necessary . ❏ Inspect t[...]

120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace accessory drive belt(s). ❏ Inspect the brake linings, replace if necessary . ❏ Inspect exhaust system. ❏ Inspect the front suspension, tie rod ends an[...]

126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front & rear axle fluid, change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysl[...]

138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Ro[...]

150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. ❏ Change the manual transmission fluid if using your vehicle for any of the following: trai[...]

† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, [...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 5 2 7 ▫ Prepar e For The Appointment ........... 5 2 7 ▫ Prepar e A List ...................... 5 2 7 ▫ Be Reasonable W ith Requests ............ 5 2 7 䡵 If Y ou Need Assistance ................. 5 2 7 ▫ Chrysl[...]

䡵 Publication Order Forms ................ 5 3 1 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 5 3 3 ▫ T readwear ......................... 5 3 3 ▫ T raction Grades ..................... 5 3 3 ▫ T emperature Grades .................. 5 3 4 526 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impaired customer , who has access to a TDD or a conventional teletypewriter (TTY) in the[...]

W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or r elated concerns[...]

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Aut[...]

NOTE: A street address is r equir ed when ordering manuals (no P .O. Boxes). • Service Manuals These comprehensive Service Manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing Chrysler Gr oup LLC vehicles. A complete working knowledg[...]

Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orldwide W eb at: • www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade ratin[...]

W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its abilit[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) ............ 249,371 Adding Engine Coolant (Antifreeze) .......... 4 7 2 Adding Fuel ........................... 4 1 6 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 463 Air Conditioner Maintenance ............... 4 6 5 Air Conditioning ..................... 319,323 Air Conditioning Controls ................. 3 [...]

Axle Lock .......................... 350,351 Battery ............................... 4 6 3 Keyless T ransmitter Replacement (RKE) ....... 2 3 Belts, Seat ............................ 39,77 Body Mechanism Lubrication ............... 4 6 6 Brake Assist System ...................... 3 7 4 Brake Assist W arning Light ................. 2 5 9 Brake Contr[...]

Child Restraint T ether Anchors ............. 67,69 Child Seat .............................. 6 6 Climate Control ......................... 3 1 7 Clock ..................... 269,283,285,288,297 Compact Disc (CD) Maintenance ............. 3 1 6 Compass .............................. 2 6 1 Compass Calibration ..................... 2 6 4 Computer , T [...]

Disarming, Theft System ................... 1 8 Disposal Engine Oil ........................... 4 6 2 Used Coolant (Antifreeze) ................ 4 7 4 Door Locks ............................. 3 0 Doors ................................. 2 6 Driver’s Seat Back T ilt .................... 1 2 6 Driving ............................... 3 5 4 Off-Paveme[...]

Flooded, Starting ...................... 3 3 2 Fuel Requirements .................. 4 1 1,501 Jump Starting ......................... 4 4 6 O i l .............................. 460,501 Oil Disposal .......................... 4 6 2 Oil Filter ............................ 4 6 2 Oil Selection .......................... 5 0 1 Overheating ..............[...]

Fluids, Lubricants and Genuine Parts .......... 5 0 2 Fog Light Service ........................ 4 9 9 Fog Lights .......................... 138,499 Fold and T umble Rear Seat ................. 1 3 0 Folding Rear Seat ........................ 1 3 3 Four Wheel Drive ....................... 3 4 5 Shifting ............................. 3 4 7 Four Whee[...]

Hands-Free Phone (Uconnect™) .............. 8 8 H a r d T o p ............................. 1 6 0 Hard T op, Modular ...................... 1 6 0 Hard T op Removal ....................... 1 6 8 Hazard W arning Flasher ................... 4 4 0 Head Restraints ......................... 1 2 8 Head Rests ............................ 1 2 8 Headlights[...]

Jack Location ........................... 4 4 2 Jack Operation .................... 442,444,445 Jacking Instructions ...................... 4 4 4 Jump Starting .......................... 4 4 6 Key , Programming ........................ 1 6 Key , Replacement ........................ 1 5 Key , Sentry (Immobilizer) ................... 1 4 Key-In Remin[...]

Electronic Thr ottle Control W arning ......... 2 6 0 Engine T emperature W arning .............. 2 5 0 Exterior .............................. 7 9 F o g ............................. 138,499 Hazard W arning Flasher ................. 4 4 0 Headlight Switch ...................... 1 3 6 Headlights ........................... 4 9 8 High Beam .........[...]

Maintenance Procedur es ................... 4 5 9 Maintenance Schedule .................... 5 0 6 Malfunction Indicator Light (Check Engine) . . 257,457 Manual, Service ......................... 5 3 1 Manual T ransmission .................. 335,480 Fluid Level Check ..................... 4 8 1 Lubricant Selection ..................... 4 8 0 Shift S[...]

Oil Pressur e Light ....................... 2 4 7 Onboard Diagnostic System .............. 456,457 Operator Manual (Owner’s Manual) ............ 6 Outside Rearview Mirrors .................. 8 7 Overheating, Engine ................... 251,440 Owner’s Manual (Operator Manual) ......... 6,531 Paint Care ............................. 4 8 2 Paint D[...]

Shifting out of T ransfer Case Neutral (N) ..... 4 3 7 Reformulated Gasoline .................... 4 1 2 Refrigerant ............................ 4 6 6 Release, Hood .......................... 1 3 5 Reminder , Lights On ..................... 1 3 8 Reminder , Seat Belt ....................... 4 7 Remote Control Door Locks ........................... [...]

Reminder ............................ 2 4 7 Seats ................................. 1 2 4 Adjustment .......................... 1 2 5 Easy Entry ........................... 1 2 7 Fold and T umble Rear ................... 1 3 0 Head Restraints ....................... 1 2 8 Height Adjustment ..................... 1 2 6 Rear Folding ..................[...]

Cold W eather ......................... 3 3 2 Engine Block Heater .................... 3 3 5 Engine Fails to Start .................... 3 3 2 Manual T ransmission ................... 3 3 1 Remote .............................. 2 4 Steering Power ........................... 367,368 T ilt Column .......................... 1 4 5 Wheel Lock ...........[...]

Pressur e Monitor System (TPMS) ........... 4 0 6 Pressur e W arning Light .................. 2 5 2 Quality Grading ....................... 5 3 3 Radial .............................. 4 0 1 Replacement ......................... 4 0 3 Rotation ............................ 4 0 4 Safety .............................. 3 8 7 Sizes ......................[...]

Maintenance ....................... 478,480 Manual ............................. 3 3 5 Range Indicator ....................... 2 5 2 Shifting ............................. 3 3 9 T ransmitter Battery Service (Remote Keyless Entry) ................................. 2 3 T ransporting Pets ........................ 7 4 T read W ear Indicators ..........[...]

W indshield Defroster ...................... 7 7 W indshield W ashers ................... 141,467 Fluid ............................... 4 6 7 W indshield W iper Blades .................. 4 6 6 W indshield W ipers ....................... 1 4 1 W iper , Rear ............................ 2 3 8 552 INDEX[...]

Chrysler Group LL C 10JK72-126-A C 3rd Edition Printed in U.S.A.[...]