Cisco Systems ASR 9001 manuale d’uso

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco A SR 90 0 1 and Cisco A SR 90 0 1 -S Router s Hardw are Installation Guide M arc h 20 15[...]

THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY PRO[...]

iii Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide CONTENTS Preface ix Changes to This Document ix Audience x Purpose x Document Organization x Document Conventions x Obtaining Documentation and Submitting a Serv ice Request xi CHAPTER 1 Preparing for Installation 1-1 Safety Guidelines 1-2 General Safety Guidelines 1-3 Com[...]

Contents iv Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Console Port Signals 1-23 Auxiliary Port Signals 1-23 Management LAN Ports Connection Guidelin es 1-24 Management LAN Port LED Indicators 1-24 Management LAN RJ -45 Cabling 1-25 Sync Ports Connection Guidelines 1-26 SYNC Port LED Indicators 1-26 RP External USB Po[...]

Contents v Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Optical Device Installa tion and Removal 3-11 Cleaning Optical Devices 3-11 Checking the In stallation 3-11 Verifying the Installation 3-11 Using show Commands to Verify Modular Port Adapter (MPA) Status 3-1 2 Using show Commands to Display Modul ar Port Adap ter (M[...]

Contents vi Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide RP Front Panel Indica tors 4-10 Ethernet Ports and Status LEDs 4-11 Auxiliary and Console Ports 4-11 Monitoring Critical, Major, and Minor Alarm Status 4-12 Troubleshooting the Line Card 4-12 Initial Boot Process 4-12 Status LEDs 4-12 Configuring and Troubleshoo t[...]

Contents vii Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide APPENDIX A Technical Specif ications A-1 Physical Specifications A-2 Environmental Specifications A-2 AC Electrical Specifications A-3 DC Electrical Specifications A-3 AC Input Voltage Range A-4 DC Input Voltage Range A-4 Power System DC Output Leve ls A-4 RP Port[...]

Contents viii Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide[...]

ix Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Preface This Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardw are Installation Guide pref ace contains these sections: • Changes to This Document, page ix • Audience, p age x • Purpose, page x • Document Or ganization, page x • Document Con v entions, page x • [...]

x Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Preface Audience This guide is written for hardware installers and system admi nistrators of Cisco routers. These users must have a substantial background i n installing and conf iguring router and switch-based hardware. Also, they should be f a miliar with electron ic circ[...]

xi Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Preface • Elements in square brackets ([ ]) are optional. • Alternati ve but required k eyw ords are grouped in br aces ({ }) and separated by vertical bars (|). Caution Means be car ef ul . Y ou are capable of doing something that might result in equ ipment damage or l[...]

xii Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Preface[...]

CH A P T E R 1-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide 1 Preparing for Installation Cisco ASR 9001 Router The Cisco ASR 9001 Router is a compact high-capaci ty provider edge (PE) rout er that deli vers 120 Gbps of non-blocking , full-duplex fabric capacity in a two-rack-uni t (2R U) form factor . Similar to other [...]

1-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Safety Guidelines Figure 1 -2 Front P anel of the Cisco ASR 900 1 -S Rou ter In order to achie ve the full bandwidth of 120 Gbps an d to enable the disabled ports, a C isco license can be obtained. Once t he license is obtained an d i[...]

1-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Safety Guidelines General Safety Guidelines • Nev er attempt to lift an object that might be too hea vy for you to lift by yourself. • Alw ays disconnect the po wer source and unplug all power cab les before lifting, movi ng, or wo[...]

1-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Safety Guidelines Preventing Electrostatic Discharge Damage Many router components c an be damaged b y static el ectricity . Not exercising the proper electrostatic dischar ge (ESD) precautions can result i n intermittent or complete [...]

1-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines • Do not lift equipmen t alone; hav e another person help yo u to lift the equipment. • Ensure that your fo oting is solid; ba lance the wei ght of the object between your feet. • Lift the equipment sl[...]

1-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines – W eight of the router does not mak e the frame unstable. – Frame is bolted to the floor and is secured to the bui lding structure using either w all brackets or over he ad b ra cke ts . • When mount[...]

1-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines Site Wiring Guidelines When planning the locati on of the router , consider distance limitations for si gnaling, electromagnetic interference (EMI), and connector compatibility . If the wiring is run for any[...]

1-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -5 Air Flow P ath through the Cisco ASR 900 1 Router When selecting a site to instal l the router , observe these guidelines: • Dust free area—Site should be as dust fre e as possible. Dust y [...]

1-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines Rack-Mounting and Air Flo w Clearance Guidelines The router can be mounted in most 2-po st, 4-post, or telco-style 19-inch equi pment racks that comply with the Electron ics Industries A ssociation (EIA) sta[...]

1-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines Note The mounting brack ets on the Cisco A SR 9001 Router chassis ha ve a pair of holes at the top and botto m of each bracket and three slot s (e longated holes). If th e Cisco ASR 9001 Router is to be mo[...]

1-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines Enclosed Rack with Perforated Sides Item c in Figure 1-6 sho ws a free-st anding 4-post en closed rack with perforated sides and two mounting posts in the front. Caution Do not install the Cisco ASR 9001 Ro[...]

1-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -8 ASR 900 1 Clearance Requir ements fo r an Enclosed 4- P o st Rack Installation Temperature and Humidity Guidelines The operating and nonoperating en vironmen tal site requirements are li sted [...]

1-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines Caution Proper grounding is necessary to av oid damage from lightning and po wer sur ges. See NEBS Supplemental Unit Bonding and Groundin g Guidelines, page 1-20 for g rounding requi rements. AC Powered Rou[...]

1-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -9 AC P ower Cor d CAB-A C Figure 1 -1 0 AC P ow er Cord CAB-L620P -C13-JPN Figur e 1 -1 1 AC P ow er Cord CAB-A CA Connector: IEC 60320 C13 Plug: EL701B 332012 Cordset rating: 15 A, 250 V Length[...]

1-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines Figur e 1 -12 AC P ow er Cord CAB-A CI Figur e 1 -13 AC P ow er Cord CAB-A CR Figur e 1 -14 AC P ow er Cord CAB-A CS Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Connector: IEC 60320 C13 Plug: CEI[...]

1-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -15 AC P ow er Cord CAB-A CU Figur e 1 -16 AC P ow er Cord CAB-A CC Figur e 1 -17 AC P owe r Cord CAB-A CSA 285301 Connector : IEC 60320 C13 Plug: BSI 1363 Cordset rating: 13 A, 250 V Length: 8 f[...]

1-17 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines Figur e 1 -18 AC P ow er Cord CAB-9K1 0A -EU Figur e 1 -19 AC P ow er Cord SFS-250V -1 0A -IS DC Powered Router Connections to DC power modules are rated at 20 A ma ximum. The system accepts a nominal input[...]

1-18 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figure 1-20 sh ows the ty pe of terminal block required fo r DC-input cable connections. Figur e 1 -20 DC P ow er Cable T er minal Block Figure 1-21 sh ows DC po wer source cable connections for single DC [...]

1-19 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Site Requirement Guidelines Figur e 1 -21 DC Po wer Sour ce Cabling Sc heme for a Single DC P ower Module The color coding of the source DC po wer cable leads depends on the color coding of the site DC po wer source. Because there is [...]

1-20 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Site Requirement Guidelines NEBS Supplemental Unit Bonding and Grounding Guidelines Y ou must permanently conn ect the central of fice ground system or in terior equipment groundin g system to the supplemental bonding and grounding c[...]

1-21 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines Cisco ASR 9001 Router Port Connection Guidelines This section contains detail ed cabling and sign al information for all in terface and port conn ections to the RP . It also provides in[...]

1-22 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines Console Port and Auxiliary Port Connection Guidelines The RP has two E IA /TI A-2 32 (fo rme rly RS232) serial RJ-45 connection por ts ( Figure 1-23 ): • Console port—RJ-45 interfa[...]

1-23 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines Console Port Signals The RP console port is an RJ -45 interface for connecti ng a terminal to the router . The console port does not support modem control or hardware flo w cont rol and[...]

1-24 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines Management LAN Ports Connection Guidelines The RP has two RJ45 media-depend ent interface ( MDI) Ethernet management LAN ports: M GT LAN 0 an d MG T LAN 1 ( Figure 1-23 ). These ports [...]

1-25 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines Figur e 1 -24 RP Manag ement LAN P ort LE D Indicat ors Management LAN RJ-45 Cabling When connecting the RJ-45 por t to a hub, repeater , or switch, use the straight-t hrough cable pino[...]

1-26 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines Sync Ports Connection Guidelines The SYNC 0 and SYNC 1 ports are ti ming synchronizat ion po rts. They can be conf igured as Building Integrated T iming Supply (BITS) ports or J.21 1 p[...]

1-27 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines RP External USB Port The Cisco ASR 9001 Router RP card has an external US B T ype A slot accessible on the front panel. The front panel USB slot accept s widely a vailabl e USB thumb dr[...]

1-28 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines[...]

CH A P T E R 2-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide 2 Unpacking and Installing the Chassis This chapter contains the proc edures for unpacking and insta lling the Cisco ASR 9001 Router. It includes these sections: • Pre-Installation Consid erations and Req uirements, page 2-1 • Unpacking the Cisco ASR 900 1[...]

2-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Unpacking the Cisco ASR 9001 Router Unpacking the Cisco ASR 9001 Router Follo w these steps to unpack the Cisco ASR 9001 Router from it s shipping container ( Figure 2-1 ). Step 1 Cut the packaging tape an d open the cardboar[...]

2-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Unpacking the Ci sco ASR 9001 Router Figure 2-1 Unpacking the Cisco ASR 900 1 Ro uter fr om the Shi pping Container Positioning the Router Use a safety hand truck to mo ve the router to the lo cation where the router is bein [...]

2-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Cisc o ASR 90 01 Chassis Installing the Cisco ASR 9001 Chassis This chapter describes how to install a Cisco ASR 9001 chassis in a rack. It includes the follo wing sections: • Before you Begi n, page 2-4 • [...]

2-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Cisco ASR 9001 Chassis Verifying Rack Dimensions Before you instal l the chassis, m easure the space betwee n the vertical mounting flanges (rails) on your equipment rack to verify that the rack conforms to the[...]

2-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Cisc o ASR 90 01 Chassis Installing the Chassis in a Two-Post Rack Before you install the chassis in the rack, make sure that you hav e the ne cessary tools and equipment (see Before you Be gin, page 2-4 ). Not[...]

2-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Cisco ASR 9001 Chassis Step 6 Fully tighten all the scre ws on the chassis mounting fl anges and bracket flanges (e ach side) to secure the chassis to the rack rails. Figur e 2-4 Installing the Cisco ASR 90 0 1[...]

2-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Cisc o ASR 90 01 Chassis Installing the Chassis in a Four-Post Rack If you are install ing the chassis without ai r plenum kit, you will need t wo side mountin g brackets used to attach the c hassis to th e rea[...]

2-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Supplemental Bonding and Ground ing Connection s Supplemental Bonding and Grounding Connections Before you po wer on the router for the f irst time, we recommend that you co nnect the central of fice ground system or Network [...]

2-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Optional Air Plenum Kit Installing the Optional Air Plenum Kit The Cisco ASR 9001 Router has an option al air plenum kit (P ID ASR-9001-PLENUM=) that con verts the chassis from sid e-to-side venti lation to fr[...]

2-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Optional Air Plenum Kit Installing the Air Plenum Kit The air plenum ki t is mounted in the rack before the Cisco ASR 9001 Router is installed. The steps for mounting the air pl enum kit in the rack are dif fe[...]

2-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Optional Air Plenum Kit Figur e 2-7 Installing the Plen um Base in a 19-inch Rac k Step 4 Attach the left and right air baf f les to the plenum base using the Cisco supplied M5x10mm scre ws (four for each air [...]

2-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Optional Air Plenum Kit Figure 2-8 Attaching the Rear A d apter Plat es (Four -P ost Rack) Step 8 Place the Cisco ASR 9001 Router on a flat and stable su rface. Attach the rear grounding bracket ( Figure 2-9 )[...]

2-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Optional Air Plenum Kit Figur e 2-9 Rear Grounding Br ack et Step 9 Install the Cisco ASR 90 01 Router in the plenum assembly in the rack (see Installing the Chassis in a T wo-Post Rack, page 2-6 or Installing[...]

2-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Optional Air Plenum Kit Step 10 After the chassis is installed, attach the cable guide to the front left side post of the rack. Fasten the cable guide with one customer -supplied rack-mounting scre w ( Figure [...]

2-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Optional Air Plenum Kit Installing the Air Plenum Kit in an ETSI Two-Post to Four-Post Rack Note The air plenum kit is assembled and mounted in the rack before the Cisco ASR 90 01 Router is installed. T o inst[...]

2-17 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Optional Air Plenum Kit Figure 2-1 1 Attac hing the Air Baffles t o the Plenum Base 1 Air Baf fle 2 Plenum base 380768 1 1 2[...]

2-18 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Optional Air Plenum Kit Step 3 Position th e air filter assembly at the front of the plenum assembly usin g the two ke y locators. Insert and hand-tighten the two capti ve scre ws to secure the air f ilter ass[...]

2-19 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Optional Air Plenum Kit Step 4 Position t he cable management tray at the front of t he plenum assembly ( Figure 2-13 ). Insert and hand-tighten both captiv e screws (o ne on each side) to secu re the cable ma[...]

2-20 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Optional Air Plenum Kit Figure 2-14 Installing the Pl enum Assembly in a Rack Step 6 Attach the plenum assembly to th e left and right rack rails usin g customer-suppl ied rack-mounting scre ws. W e recommend [...]

2-21 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 2 Unpacking and Installin g the Chassis Installing the Optional Air Plenum Kit Figure 2-15 Attac hing th e Rear Adapte r Plates Step 8 Place the Cisco ASR 9001 Router on a flat and stable su rface. Attach the rear grounding bracket ( Figure 2-9 ). Step 9 Install t[...]

2-22 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 2 Unpacking and Installing the Chassis Installing the Optional Air Plenum Kit[...]

CH A P T E R 3-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide 3 Installing Modules and C ables in the Chassis This chapter contains the procedures for installing cards an d modules into th e chassis, after it has been installed in a rack. It also describes how to connect ca bles to the ports and RP . • Fixed 4x1 0-Giga[...]

3-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Modular Port Adapte rs Figure 3-1 sho ws the front pane l of the ch assis and connectors of the fixe d 4x10-Gig abit Ethernet ports. Figure 3-1 .4x1 0 -Gigabit Ether net SFP+ Por ts Modular Port Adapters The Cisco AS[...]

3-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Modular Port Adapte rs Figure 3-2 sho w s an example of the 20-Port Gigabit Et hernet Modular Port Adapter . Figur e 3-2 20-Port Gigabit Ethe r net Modular P ort A dapter Ta b l e 3 - 1 describes the 20-Port Gi gabit [...]

3-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Modular Port Adapte rs Figure 3-3 sho ws an example of the 4-Port 10 Gigabit Ethernet modular port adapter . Figure 3-3 4-Por t 1 0 Gigabit Ethernet Modular P ort Adapter Ta b l e 3 - 2 describes the 4-Port 10 Gigabi[...]

3-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Modular Port Adapte rs Figure 3-4 sho ws an example of the 2-Port 10 Gigabit Ethernet modular port adapter . Figure 3-4 2-Por t 1 0 Gigabit Ethernet Modular P ort Adapter Ta b l e 3 - 2 describes the 2-Port 10 Gigabit[...]

3-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Modular Port Adapte rs Figure 3-5 sho ws an example of the front pane l of the 2-Port 40 Gig abit Ethernet modular port adapter . Figure 3-5 2-Por t 40 Gigabit Ether net Modular Por t Adapt er Ta b l e 3 - 4 describe[...]

3-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Modular Port Adapte rs 1-Port 40 Gigabit Ethernet Modular Port Adapter The 1-Port 40 Gigabit Ethernet modular port adap ter pro vides a cage for a QSFP+ Ethernet optical interface module that operates at a rate of 40 [...]

3-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Installing and Removing Modular Port Adapters Ta b l e 3 - 5 describes the 1-Port 40 Gigabit Ethernet modular port adapt er LEDs. Installing and Removing Modular Port Adapters These sections describe ho w to install [...]

3-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Installing and Removing Modular Po rt Adapters Figur e 3-7 Handling a Modular P ort Ad apter (MP A) Online Insertion and Removal Cisco ASR 9001 Router modul ar port adapters (MP As) support online insertion and remov [...]

3-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Installing and Removing Modular Port Adapters – Insert a 20 GE MP A – Remov e and then insert a replacement 20 GE MP A If the MLC boots wit h a 20 GE MP A in the bay yo u can remov e and then insert a replacemen[...]

3-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Installing and Removing Modular Po rt Adapters Optical Device Installation and Removal Any contami nation of the f iber connection can cause f ailure of the component or f ailure of the whole system. A particle t hat[...]

3-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Installing and Removing Modular Port Adapters Step 3 If the modular port adapters (MP As) do not become acti ve within three minutes, r efer to the system console messages. If there is no indication that a f ield-pr[...]

3-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Installing and Removing Modular Po rt Adapters Using the ping Command to Verify Network Connectivity The ping command allo ws you to verify whether a m odular port adapter (MP A) port is functioning properly and to c[...]

3-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Installing and Removing SFP and XFP Modules Installing and Removing SFP and XFP Modules For information on inst alling and removing SFP and XFP modules, see the Cisco ASR 9000 Series Aggr e gation Services Router Et[...]

3-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Cable Management Installing a Cable Management Tray T o install a cable-management tray , follow these steps: Step 1 Attach an ESD-pre venti ve wr ist or ankle strap and follo w its instructio ns for use. Step 2 Posi[...]

3-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Cable Management Step 4 Repeat Step 3 for all remaining interf ace cables, proceeding from the bottom ports u pward, then pr oceed to Step 5 . Step 5 Loosen the capt i ve installatio n screw on the cable-ma na gemen[...]

3-17 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Cable Management Figur e 3-1 1 Cable-Management Br ac k et Installa tion and Re mov al Step 3 Insert and tighten the captiv e scre w(s) to secure the bracket ( Figure 3-11 ). Step 4 Connect all the cables to the inte[...]

3-18 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Connecting Route Pro cessor Cables Connecting Route Processor Cables This section describes ho w to connec t cables to the console, auxiliary , and Ethernet ports on the RP . The console and auxiliary ports are both[...]

3-19 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Connecting Route Processor Cab les Connecting to the RP Console Port The system console port on the RP is an RJ-45 recep tacle for connecting a data terminal to perform the initial conf iguration of the router . Depe[...]

3-20 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Connecting Power to the Router Caution Ethernet management ports are primaril y used as T e lnet ports into the Cisco ASR 9001, and for boo ting or accessing Cisco so ftware images over a network to which an Etherne[...]

3-21 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Connecting Power to the Router Step 5 Close the cable wrap to secu re the A C power cord plug to the po wer module receptacle. Figure 3-13 T ypical AC P ow er Connections Step 6 Plug the other end of th e A C po wer [...]

3-22 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Connecting Power to the Router Connecting Power to a DC-Powered Router This section contains the pr ocedures to connect th e DC source po wer cables to a DC -po wered router . The color coding of source DC po wer ca[...]

3-23 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 3 Installing Modul es and Cables in the Chassis Powering on the Router Figure 3-14 T ypical P ower Connection s f or a Single DC P ower Module Step 4 Proceed to Powerin g on the Router , page 3-23 . Powering on the Router Follo w these steps to turn on po wer to e[...]

3-24 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 3 Installing M odules and Cables in the Chassis Powering on the Router[...]

CH A P T E R 4-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide 4 Troubleshooting the Installation This chapter contains g eneral troubleshoot ing information to help isolate the cause of an y dif fi culties you might encounter durin g the installation and ini tial startup of the system. Although an o ver -temperature cond[...]

4-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshootin g Overview • Po wer subsystem—Router chassis i s shipped with up to tw o A C-input or DC-input po wer supply modules installed in the Ci sco ASR 9001 Router chassis. • Chassis backplane po wer distribution?[...]

4-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem Troubleshooting the Power Subsystem • T roubleshooting the A C-Input Power Subsystem, page 4-3 • T roubleshooting the DC-Input Po wer Subsystem, page 4-5 • T roubleshooting the Po wer Dis[...]

4-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem Figur e 4-1 P ower Module Status Indicat ors If the A C power module is not operating properly , follo w these steps: Step 1 Make sure the p ower module is seated properly by ejecti ng and res[...]

4-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem • F AIL (amber) LED —Indicates the power suppl y fail ure, includes ov er volt age, ov er current, over temperature and f an failure cond itions. If the F AIL LED is blinking, it indicates [...]

4-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem Additional Power Subsystem Troubleshooting Information This section contains additional troubleshootin g information to help you isol ate the cause of a po wer problem. Hardware and Soft ware [...]

4-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem 0/RSP0/* host 5.0V 5000 n/a host VP3P3_CAN 3299 n/a host 0.75V 750 n/a host 3.3V_RSP 3299 n/a host 2.5V_RSP 2499 n/a host 1.8V_RSP 1799 n/a host 1.5V_RSP 1500 n/a host 1.2V_RSP 1199 n/a host 1.[...]

4-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem host 1.8V_ZAR_LDO 1799 n/a host 3.3V_ZAR_LDO 3300 n/a host 2.5V_SKT_SKM 2500 n/a host 1.8V_LGTNG 1800 n/a host 1.5V_NP4C_1 1500 n/a host 1.5V_SKT 1500 n/a host 1.05V_NP4C_CORE 1050 n/a host 1.[...]

4-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Route Processor Subsystem • If the fan tr ay is still not operating, there could be a problem with either the fan tray o r with the +12 VDC distrib ution through backplane. • Contact your Cisco representat[...]

4-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Rou te Processor Subsystem RP Front Panel Indicators The RP card has eight discrete LED i ndica tors for display of system information. Ta b l e 4 - 3 lists the display d efinitions o f the eight disc rete L[...]

4-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Route Processor Subsystem Ethernet Ports and Status LEDs The RP has two 8-pin media- dependent interface (MDI) RJ-45 Management LAN ports for 10 Mbps, 100 Mbps, and 1000Mbps Ethernet con nections. These ports[...]

4-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Line Card Monitoring Critical, Major, and Minor Alarm Status Alarms warn of: • Overtemperature con dition on a componen t in the card • Fan failure in the fan tr ay • Overcurrent condit ion in a po wer[...]

4-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Line Card Configuring and Troubleshooting Line Card Interfaces After the pe rson who in stalled the ha rdware verifies that the line c ard is working properly by exami ning the LEDs, the network administrator[...]

4-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Line Card Line Card Interface Address A Cisco ASR 9001 Router identifies an interface addr ess by its rack number , line card slot number, instance number , and port number , in the format rac k/slot/instanc[...]

4-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Line Card RP/0/RSP0/CPU0:router(config-if)# no shutdown The no shutdown comm and passes an enable command to t he line card. It al so causes the line card to configure itself based on the most recent co nfigu[...]

4-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Line Card NAME: "module mau 0/0/0/0", DESCR: "XFP" PID: XFP-10G-MM-SR , VID: V02 , SN: ONT1535101F NAME: "module mau 0/0/0/1", DESCR: "XFP" PID: XFP-10G-MM-SR , VID: V[...]

4-17 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Line Card PID: SFP-GE-S , VID: V01 , SN: FNS15501AJX NAME: "module mau 0/0/1/17", DESCR: "SFP" PID: SFP-GE-S , VID: V01 , SN: FNS155009TE NAME: "module mau 0/0/1/18", DESCR: &quo[...]

4-18 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Cooling Subsystem Note It is important to collect the sho w tech-support command da ta before doing a reload or po wer cycle. Failu re to do so can cause all information about the problem to be lost. Output [...]

4-19 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 4 Troubl eshooting the Installation Troubleshooting the Cooling Su bsystem For additi onal po wer supply troublesh ooting information, see T roubleshooting the Po wer Subsystem, page 4-3 . Note For the RSP to communi cate properly to a po wer module, input power t[...]

4-20 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 4 Troubleshoo ting the Installation Troubleshooting the Cooling Subsystem Step 2 Eject and reseat the fan tray maki ng sure the capti ve scre ws are securely tightened to a torque of 10 +/–1 in-lb. If the fan tr ay still does not funct ion, go to Step 3. Step 3[...]

CH A P T E R 5-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide 5 Replacing Cisco ASR 90 01 Router Components The router is equip ped as ordered and is r eady for inst allation and start up when it is ship ped. As network requirements change, you may need to up grade the system by adding or changing components. This chapte[...]

5-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 5 Replacing Cisco ASR 9001 Router Components Prerequisites and Preparation Online Insertion and Removal Some f ield-replaceable units (FR Us) for the Cisco ASR 9000 Series Routers can be remo ved and replaced with the p ower on and the system operati ng. This faci[...]

5-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing the Fan Tray Removing and Replacing the Fan Tray Note Fan tray OIR (Online I nsertion and Remov al) is supported from Cisco IOS XR Release 4.2.3. The fan tray can be removed and repl aced while the[...]

5-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing the Air Filter Step 7 V erify that the (green) OK st atus indicator on t he front of the fan tray goes on. If t he OK indica tor does not light, see T roubleshooting the Cooli ng Subsystem, page 4[...]

5-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing the Air Filter Figur e 5-2 Replacing the Air Filter Step 3 Install the replacement air filter . Note V erify the air flo w direction when installing t he ne w air fi lter . An air flo w direction a[...]

5-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing AC or DC Power System Components Removing and Replacing AC or DC Power System Components This section contains remo v al and replacement procedures for the A C and DC po wer systems used in the Ci[...]

5-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing AC or DC Power System Components Figur e 5-3 Removing or In stalling an A C or DC P ow er Module (A C po wer sho wn) Installing an AC or DC Power Module T o install an A C or DC po wer module ( Fig[...]

5-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Chapter 5 Replacing Cisco ASR 9001 Router Components Removing a Chassis from the Equ ipment Rack Removing a Chassis fr om the Equipment Rack Use this procedure to remove the chassis and its components from the equipment rack: Caution Y ou must use two people to remove the[...]

A-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide APPENDIX A Technical Specifications This appendix lists certain tech nical specificatio ns for the Cisco ASR 9001 an d ASR 9001-S Router s. • Physical Specif ications, page A-2 • En v ironmental Specifications , page A-2 • A C Elec trical Specifications, page A-3 •[...]

A-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations Physical Specifications Physical Specifications Environmental Specifications T able A-1 Ph ysical Specifications Description V alue Chassis heig ht 3.46 in. (8.79 cm) Chassis width 17.42 in. (44.2 cm) Chassis depth 18.5 in. (4 7.0 cm) [...]

A-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Appendix A T echnical Specifications AC Electrical Specifications AC Electrical Specifications Caution Be sure that the chassis conf iguration complies with the required po wer budgets. Failu re to properly verify th e conf iguration may result in an un predictable state i[...]

A-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations AC Input Voltage Range AC Input Voltage Range DC Input Voltage Range Power System DC Output Levels Source DC service requirement 1 Suf ficient to supp ly the rated input current. Local codes apply . Redundanc y Po wer redundanc y requi[...]

A-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Appendix A T echnical Specifications RP Port Specifications. RP Port Specifications. Power Consumption Specifications The follo wing table lists the p ower consumption specif ications for a fully con figured ch assis. Caution Be sure that the chassis conf iguration complie[...]

A-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations Fast Ethernet and G igabit Ethernet SFP Module s Fast Ethernet and Gigabit Ethernet SFP Modules T able A-1 0 Cisco Fast Ether net an d Gigabit Ether net SFP Modules Part Number Description Wavelength Fiber T ype T ypical Maximum Distan[...]

A-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Appendix A T echnical Specifications 10-Gigabi t Ethernet S FP+ Transceiv er Modules 10-Gigabit Ethernet SFP+ Transceiver Modules T ab le A -1 1 Cisco 1 0-Gigabit Ethernet SFP+ T ransceiver Modules Part Number Description Wavelength Fiber T ype T ypical Maximum Distance SF[...]

A-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations SFP+ Transceiver Modu les SFP+ Transceiver Modules T able A -12 Cisco SFP+ T ransceiver Modules Part Number Description Wavelength Fiber T ype T ypical Maximum Distance ONS-SC+-10G-EP30.3 10G SFP+, 100 GHz, LC 1530.3 SMF 49.72 miles (8[...]

A-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Appendix A T echnical Specifications DWDM SFP+ Tra nsceiver Mo dules DWDM SFP+ Transceiver Modules DWDM XFP Transceiver Modules Note In Ta b l e A - 1 4 , MR refer s to multi-rate. ONS-SC+-10G-EP59.7 10G SFP+, 100 GH z, LC 1559.7 SMF 49.72 miles (80 km) ONS-SC+-10G-EP60.6 [...]

A-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations CWDM SFP Transceiver Modu les CWDM SFP Transceiver Modules ONS-XC-10G-EP43.7 10G MR, XFP , 100 GHz, LC 1543.7 SMF 31.1 miles (50 km) ONS-XC-10G-EP44.5 10G MR, XFP , 100 GHz, LC 1544.5 SMF 31.1 miles (50 km) ONS-XC-10G-EP45.3 10G MR, X[...]

A-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Appendix A T echnical Specifications 10GBASE CWDM SFP+ 40km Transceiver Modules 10GBASE CWDM SFP+ 40km Transceiver Modules DWDM SFP Transceiver Modules T ab le A -16 Cisco 1 0GBASE CWDM SFP+ T r ansceiver Modules Part Number Description Wavelength Fiber T y pe Color Ident[...]

A-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations DWDM SFP+ Transceiver Modules Caution Use only the SFP modules supplied by Cisco Systems, Inc. with your Ethernet line card. Each SFP module contains an internal seri al EEPR OM that is security-programmed by the SF P manufacturer wit[...]

A-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Appendix A T echnical Specifications DWDM SFP+ Tra nsceiver Mo dules D WDM-SFP10G-58.17 Cisco 10GB ASE-DWDM SFP+ (100 GHz ITU grid) 1558.17 nm 24 D WDM-SFP10G-57.36 Cisco 10GB ASE-DWDM SFP+ (100 GHz ITU grid) 1557.36 nm 25 D WDM-SFP10G-56.55 Cisco 10GB ASE-DWDM SFP+ (100 [...]

A-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations 10-Gigabit Ethernet XFP and 40-Giga bit QSFP Modules 10-Gigabit Ethernet XFP and 40-Gigabit QSFP Modules Note V er s i on V0 1 a nd V 02 o f t h e XFP-10 GLR-OC192SR 10 - Gi g ab i t Et h er n et m od u l e l i st e d i n Ta b l e A -[...]

A-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide Appendix A T echnical Specifications DWDM XFP Tra nsceiver Mod ules D WDM-XFP-50.92 Cisco 10GB ASE-D WDM XFP (100 GHz ITU gr id) 155 0.92 nm 33 D WDM-XFP-50.12 Cisco 10GB ASE-D WDM XFP (100 GHz ITU gr id) 155 0.12 nm 34 D WDM-XFP-48.51 Cisco 10GB ASE-D WDM XFP (100 GHz IT[...]

A-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix A Technical Specific ations DWDM XFP Transceiver Modules[...]

B-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide APPENDIX B Site Log The site log pro vides a historical record of all operation an d maintenance actions performed on the router . Keep your site log at a con venient place near the router where it can be easily acce ssed. The site log mi ght include these entries: • Ins[...]

B-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide Appendix B Site Lo g Date Description of Action Performed or Symptoms Observed Initials[...]