Cisco PGW 2200 manuale d’uso

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco PGW 220 0 S of tswitc h Release 9.8 S of tw are Installation and Conf iguration Guide Febr uary 21, 20 12 Text Part Number: OL -18083-14[...]

THE SPECIFICATION S AND INFORMAT ION RE GARDIN G TH E PRODU CTS IN THIS MANU AL A RE SUBJ ECT T O CHAN GE W ITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USER S MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICAT IO[...]

iii Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 CONTENTS Preface ix Introduction ix Document Objectives ix Audience ix Related Documentation x Obtaining Documentation and Submitting a Serv ice Request x Document Change History xi CHAPTER 1 Preparing for Sun Solaris Operating System and Cisco PGW [...]

Contents iv Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Installing the Sparc-bas ed Solaris 10 P atches Package (CSCOh022 ) 2-54 Installing the Opteron-based Solaris 10 Patc hes Package (CSCOh032) 2-56 Installing the Solstice DiskSuite (CSCOh023) 2-59 Rebooting from the Mirrored (Sec ondary) Disk[...]

Contents v Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Quick Guide to Configuring the Cisco PGW 220 0 Softswitch Software 4-1 Before You Start 4-2 Software Directory Structure 4-3 Initial Cisco PGW 2200 Softswitch Software Configuration 4-4 Parameters Required fo r Initial Setup 4-8 Using the Cis[...]

Contents vi Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Configuring the Translation Type Attribute 4-50 Sample trigger.dat File 4-51 Initializing the Call Screening Database 4-88 .odbc.ini File Information 4-89 Setting Up Replication 4-89 Network Requirements 4-90 Initializing Database Replica t [...]

Contents vii Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Restoring Data Files 5-15 Installing and Verifying th e Cisco PGW 2200 Softswitch Software 5-16 Transferring Additional Configuration Files 5-17 Migration from Release 9.7 to Release 9.8 without Platform Ch anges 5-21 Upgrading Lively from [...]

Contents viii Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Client/Server and Secure Connectiv ity Relatio nships B-1 Secure Connectivity Among Cisco P GW 2200 Softswitch Applications B-2 Secure Conne ctivity Between C isco PGW 2200 Softswitch Ap plication Pl atforms B-2 Secure Connectivity Between[...]

ix Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Preface Revised: February 21, 2012 , OL-18083-14 Introduction This pref ace describes the object iv es of this document and e xplains how to f ind additional information on related products and serv ices. It contains the follo wing sections: • Docu[...]

x Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Preface Related Documentation This document co ntains in formation that is related to Cisco PGW 2200 Softswit ch software installation and conf iguration. For additional information on those subjects, see the documents at this URL: http://www .cisco.c[...]

xi Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Preface Document Change History Release Number Document Number Change Date Change Summary 9.8(1) OL-18083-13 June 23, 2011 Upda ted the XECfgParm.dat parameters. 9.8(1) OL-18 083-12 March 2011 Updated info rmation pert aining to the Sun har dware pla[...]

xii Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Preface 9.8(1) OL-18083-05 De cember 9, 2009 Added two new parameters of the X ECfgParm.dat f ile, *.IOI and *.ICID, in Ta b l e A - 1 . Added two foot notes in Ta b l e 2 - 1 . On the Netra X4200 M2 platform, for stab ility purposes, we recommend t[...]

CH A P T E R 1-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation Revised: February 21, 2012 , OL-18083-14 Introduction This chapter prov ides checklists de scribing the required and opti onal components[...]

1-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 1 Preparing for Sun Solaris Opera ting System and Cisco PGW 2200 Softswitch Softwa re Installation Solaris 10, Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Softw are Release Preins tallation Checklists Solaris 10, Cisco PGW 2200[...]

1-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation Solaris 1 0, Ci sco PGW 2200 Softswitch Sof t ware Release 9.8 and Higher Softwar e Release Preinstallation Checklists Minimum System Requirem[...]

1-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 1 Preparing for Sun Solaris Opera ting System and Cisco PGW 2200 Softswitch Softwa re Installation Solaris 10, Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Softw are Release Preins tallation Checklists Required Tasks Before you [...]

CH A P T E R 2-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 2 Installing the Sun Sola ris 10 Operating System Revised: February 21, 2012 , OL-18083-14 Introduction This chapter pro vides instructions for installin g th e packages that create the Sun Solaris 10 operating system and its operatin[...]

2-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Before You Start • 73 GB • 146 GB Before You Start Be sure to read the following cau tions, notes, and tips before i nstalling the Sun Solaris 10 operating system and the operating en vir[...]

2-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Ti p During the installation pr ocess, monitor system ou tput fr equently for error messages and correct an y error conditions bef ore continui[...]

2-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Note If your platform has multiple disk dr iv es, install the Solaris 10 Operatin g System on the first disk dri ve only . Installing the Sun Solar[...]

2-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Initializing 1MB of memory at addr 103feec000 Initializing 1MB of memory at addr 103fee0000 Initializing 1MB of memory at addr 103f002000 Initi[...]

2-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System - Selecting package (SUNWter) - Selecting package (SUNWtnfc) - Selecting package (SUNWucbt) - Selecting package (SUNWvld) - Selecting package (SUNW[...]

2-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m - Selecting package (SUNWpool) - Selecting package (SUNWluzone) - Selecting package (SUNWzoner) - Selecting package (SUNWzoneu) - Selecting pac[...]

2-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System - Creating Solaris disk label (VTOC) Creating and checking UFS file systems - Creating / (c1t0d0s0) - Creating /var (c1t0d0s1) - Creating /opt (c1t[...]

2-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m SUNWuedg.........................done. 209.21 Mbytes remaining. SUNWugen.........................done. 209.15 Mbytes remaining. SUNWuksp.......[...]

2-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System SUNWluzone.......................done. 50.11 Mbytes remaining. SUNWpoolr........................done. 50.08 Mbytes remaining. SUNWpool............[...]

2-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m SUNWeuodf........................done. 12.23 Mbytes remaining. SUNWfchbar.......................done. 12.20 Mbytes remaining. SUNWfchba.......[...]

2-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Finish script patch_finish execution completed. Executing JumpStart postinstall phase... Executing finish script "any_finish"... any_fin[...]

2-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m few cases, mounts that cross different domains might cause files to be owned by "nobody" due to the lack of a common domain name. Do[...]

2-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Note If your server s do not ha ve a CD-R OM dri ve, see the “Installation of Solaris JS11 through ILOM” section on page 2-21 for detailed ste[...]

2-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Attempting to configure interface bge2... Skipped interface bge2 Attempting to configure interface bge1... Skipped interface bge1 Attempting t[...]

2-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System - Selecting package (SUNWlibC) - Selecting package (SUNWmfrun) - Selecting package (SUNWi15rf) - Selecting package (SUNWmdu) - Selecting package ([...]

2-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m - Selecting package (SUNWsshcu) - Selecting package (SUNWsshdr) - Selecting package (SUNWsshdu) - Selecting package (SUNWsshr) - Selecting pac[...]

2-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System SUNWcsd..........................done. 315.01 Mbytes remaining. SUNWxwrtl........................done. 314.87 Mbytes remaining. SUNWzlib..........[...]

2-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Note If you recei ve a warning message saying “Solaris 10 softw are installation par tially failed”, it is ok to proceed. Customizing syst[...]

2-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Initializing 16MB of memory at addr 103e002000 Initializing 992MB of memory at addr 1000000000 Initializing 1024MB of memory at addr 0 Rebooting w[...]

2-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m This completes the installatio n of the Sun Solaris 10 operating system. Proceed to the “Conf iguring Y our Host” section on page 2-30 . I[...]

2-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Figur e 2-1 Adv anced T ab in the BIOS Setu p Utility on the Sun Netra X4270 Platfor m c. Highlight IPMI 2.0 Conf iguration in the list. Then pres[...]

2-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Figur e 2-2 LAN Configur ation in the BIOS Setu p Utility on the Sun Netra X4270 Platf or m e. Choose Static in the IP Assignment. f. Enter IP[...]

2-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Note The IP address, subnet mask, and d efault gate way v alues in the above example is for your reference. Y ou should enter these v alues ac cor[...]

2-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Figure 2-4 IL OM–Remote Control T ab f. Click Launch Serv ice . If a pop up windo w appears for warnings and security , tick the trust point[...]

2-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Figure 2-5 Sun IL OM Re mo te Console g. Click Download Cli ent . h. Sav e the StorageReDir .jar file in local C: dri ve. If the fil e is in .zip [...]

2-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Step 5 Enab le virtual CD-R OM option in BIOS: Note This step is mandatory in so me servers such as Sun Netra X4270 M2 and Sun Fire X4800, to [...]

2-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Figur e 2-7 Set Pr iori ties in Boot T ab c. Sav e the BIOS conf iguration and e xit. Step 6 ILOM Console a. In the Remote Control tab of SP ILOM,[...]

2-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m c. Y ou will see the Solaris installation steps and d ecompres sing of files on the serv er (size 665MB). d. After completion you will recei v[...]

2-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Then enter the foll owing commands: bash# cd / bash# mount -F hsfs -o ro /dev/dsk/<dev_name> /cdrom bash# ./cdrom/core_finish/core_finish.sh[...]

2-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Note If you are installing the Sun Solaris 10 Oper ating System from the Cisco So laris 10 Operating System Jumpstart Disk for Opt eron-based [...]

2-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Hostname: unknown Configuring devices. checking ufs filesystems /dev/rdsk/c1t0d0s5: is logging. Step 5 If you are installing on a Sparc-based plat[...]

2-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Step 6 Use the arro w ke ys to navigate, and press the spaceb a r to make y our selection. V erify that Ye s is selected, and press ESC-2 to c[...]

2-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Select your primary network i nterface and press ESC-2 to contin ue. Step 9 T ext similar to the follo wing is displayed: - DHCP for bge0 --------[...]

2-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m IP addresses contain four sets of numbers separated by periods (for example 129.200.9.1). IP address: ----------------------------------------[...]

2-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System ---------------------------------------------------------------------------------- ESC-2_Continue ESC-6_Help Step 14 Enter the site-specific Subne[...]

2-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m /etc/defaultrouter file and will be the default route after you reboot (example 129.146.89.225). Router IP Address for bge0 ------------------[...]

2-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System [X] No ------------------------------------------------------------------------------- ESC-2_Continue ESC-6_Help Step 21 Ve r i f y t h a t No is [...]

2-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Search domain: Search domain: Search domain: ------------------------------------------------------------------------------- ESC-2_Continue ES[...]

2-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Note The follo wing two step s sho w ho w to set the time zo ne. The example sho ws United States Eastern time. a. Use the arrow ke ys to move the[...]

2-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m c. Use the arrow ke ys to move the cursor to your time zone (in this example, “Eastern T ime” is selected) and press the space bar to sele[...]

2-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System syncing file systems... done rebooting... SC Alert: Host System has Reset Probing system devices Probing memory Probing I/O buses Note On Opteron-[...]

2-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Where pr ocess_id is the ssh process ID number iden tified in th e previ ous step. Y ou have completed conf iguring your host. Proceed to t he[...]

2-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System /opt/SUNWvts/README /opt/SUNWvts/bin/.platform_table /opt/SUNWvts/bin/.sunvts_release /opt/SUNWvts/bin/.sunvts_sec /opt/SUNWvts/bin/.sunvts_sec_gs[...]

2-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Adding <SUNWexplo> Processing package instance <SUNWexplo> from </opt/xtrapkgs> Sun(TM) Explorer Data Collector(all) 5.5,REV[...]

2-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Modifying /etc/opt/SUNWexplo/srscinput.txt Modifying /etc/opt/SUNWexplo/t3input.txt [ verifying class <build> ] ## Executing postinstall scr[...]

2-47 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m 541 blocks Installation of <SUNWpcu> was successful. Adding <SUNWpsu> Processing package instance <SUNWpsu> from </opt/xt[...]

2-48 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Copyright (c) 1987, 1989, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved. Redistribution and use in sourc[...]

2-49 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m Installing patch packages... Patch 123526-01 has been successfully installed. See /var/sadm/patch/123526-01/log for details Patch packages ins[...]

2-50 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Checking installed patches... Executing prepatch script... Temporarily disabling fmd(1M) Verifying sufficient filesystem capacity (dry run method)[...]

2-51 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Syste m SUNWbtool SUNWcakr SUNWcar SUNWckr SUNWcnetr SUNWcpcu SUNWcsd SUNWcsl SUNWcslr SUNWcsr SUNWcsu SUNWdtrc SUNWdtrp SUNWefc SUNWesu SUNWib SUNWin[...]

2-52 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating System Dump content: kernel pages Dump device: /dev/dsk/c1t0d0s3 (swap) Savecore directory: /var/crash/sh-jingan Savecore enabled: yes Completed core har[...]

2-53 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment # eject /dev/dsk/c0t0d0s0 Step 8 Remo ve the CD from the CD-R OM driv e. This comple tes the in stallat ion of pla tform-sp ecific data. [...]

2-54 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Installing the Sparc-based Solaris 10 Patches Package (CSCOh022) T o install the Sparc-based Solaris 10 O per ating Syst em Patches pack age[...]

2-55 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment The system lists the patches that it wil l install. This list will v ary ov er time. A screen similar to the follo wing is displayed: …[...]

2-56 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Note If you used the CD-ROM dri ve to load the So laris 10 patch cluster , eject the CD prior to rebooting. This comple tes the proc edures [...]

2-57 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Note Y ou can also do wnload the Opteron-based Solaris 10 operati ng system patches package (CSCOh032) from Cisco.com. F or example, do w[...]

2-58 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt T ext similar to the follo wing is displayed: You are running as root - Good... *** InstallPatches10 begins Tue Jul 8 11:14:25 GMT+8 2008 **[...]

2-59 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment This completes th e procedur es for inst alling the S olaris 10 patc hes for Opte ron-ba sed platform s. Go to T able 2-2 on page 2-53 if[...]

2-60 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Checking for setuid/setgid programs. Thi[...]

2-61 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment is allocated DO NOT CONTINUE WITH THIS INSTALLATION! You can see the number of sectors allocated in the column marked Sector Count. Secto[...]

2-62 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the cu[...]

2-63 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment /pci@1c,600000/scsi@2/sd@0,0 1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424> /pci@1c,600000/scsi@2/sd@1,0 Specify disk (enter its [...]

2-64 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and ana[...]

2-65 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment You should have already run install_disksuite_1.sh which installs and configures the disks This script attaches the second disk and start[...]

2-66 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Press the ENTER key to continue: Step 11 Press Enter to continue the installation. T ext similar to the follo wing is displayed: The followi[...]

2-67 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment The DiskSuite installation is no w complete. If you want to conf igure your system to reboot from the mirrored disk, go to the “Rebooti[...]

2-68 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Step 4 When th e replication is complet e, bring the machine do wn to the boot prompt. T ype the follo wing command and press Enter : # /usr[...]

2-69 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Rebooting from the Mirr ored (Secondary) Disk on Opteron-based Platforms Caution Rebooting from the mi rrored (secondary) disk is normall[...]

2-70 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Shutdown started. Thu Aug 14 12:18:21 CDT 2008 Changing to init state 6 - please wait Broadcast Message from root (pts/1) on sh-agrove Thu A[...]

2-71 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment (sparc,i386) 3.0(6) Do you want to remove this package? [y,n,?,q] y ... Removal of <CSCOh023> was successful. This comple tes the D[...]

2-72 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Note On disk driv es larger than 18 GB, the swap space is 4 GB. Step 1 Load the Cisco Solaris 10 Operating En vironment CD into the CD-R OM [...]

2-73 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Media Gateway Controller Log and Spool package(sparc) 3.0(6) Cisco Systems, Inc. ## Executing checkinstall script. CSCOh024 checkinstall [...]

2-74 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Note Y o u must f irst shut down the Cisco PGW 2200 Softswitch before running the install _log_spool script. # cd /opt/sun_install/Log_Spool[...]

2-75 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment the default [/opt/CiscoMGC/var/spool]: Step 8 Press Enter to accept the default mount poin t for the spool directory or change it if you [...]

2-76 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Enter partition permission flags[wm]: wm Enter new starting cyl[0]: 0 Enter partition size[2097414b, 726c, 1024.13mb, 1.00gb]: 0c partition&[...]

2-77 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Enter partition permission flags[wm]: wm Enter new starting cyl[0]: 0 Enter partition size[0b, 0c, 0.00mb, 0.00gb]: 9848c partition> 4[...]

2-78 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Cylinder groups must have a multiple of 16 cylinders with the given parameters Rounded cgsize up to 256 /dev/rdsk/c0t1d0s4: 42676308 sectors[...]

2-79 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Step 2 Ty p e y and press Enter to remo ve CSCOh024. T ext similar to the follo wing is displayed: Unmount /opt/CiscoMGC/var/log Unmount [...]

2-80 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Note Y ou can also do wnload the Sparc-based Cisco B AMS archiv e partition package (CSCOh027) from Cisco.com. For ex ample, download the CS[...]

2-81 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment !! !! You must now change directories to !! /opt/sun_install/BAMS_archive and run the !! ./install_BAMS_archive script as root. !! Instal[...]

2-82 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt format> q 2nd Disk device is: c1t1d0 Disk type is: SUN72G Number of Cylinders : 14087 ARCHIVE directory mount point is /opt/CiscoBAMS/CDR[...]

2-83 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment partition> 1 Part Tag Flag Cylinders Size Blocks 1 var wm 1209 - 2215 4.89GB (1007/0/0) 10247232 Enter partition id tag[var]: unassign[...]

2-84 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt partition> p Current partition table (unnamed): Total disk cylinders available: 14087 + 2 (reserved cylinders) Part Tag Flag Cylinders Si[...]

2-85 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Installing the Sparc-based Communi cations and Alarm Software Package (CSCOh026) This package instal ls xterm, ntp, and ftp communi ca ti[...]

2-86 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt ## Executing checkinstall script. CSCOh026 checkinstall log file at /var/tmp/CSCOh026.checkinstall.log Platform is SUNW,Sun-Fire-V210 This m[...]

2-87 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Note The follo wing command output is tru ncated. These lists v ary over time. You are running as root - Good... x ./SUNWxwopt, 0 bytes, [...]

2-88 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt x ./SUNWftpr/reloc/etc, 0 bytes, 0 tape blocks x ./SUNWftpr/reloc/etc/ftpd, 0 bytes, 0 tape blocks x ./SUNWftpr/reloc/etc/ftpd/ftpaccess, 15[...]

2-89 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Use is subject to license terms. Copyright (c) 1999,2000,2001 WU-FTPD Development Group. All rights reserved. WU-FTPD SOFTWARE LICENSE Us[...]

2-90 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt 4. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product incl[...]

2-91 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Copyright (c) 1980, 1983, 1985, 1988, 1989, 1990 Regents of the University of California. All rights reserved. Redistribution and use in [...]

2-92 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt /opt/SUNWvts/man/man1m/vtstty.1m /opt/SUNWvts/man/man1m/vtsprobe.1m /opt/SUNWvts/man/man1m/vtsk.1m /opt/SUNWvts/man/man1m/vts_cmd.1m /opt/SU[...]

2-93 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment (sparc) 6.4,REV=2007.07.05.10.00 Do you want to remove this package? [y,n,?,q] y ## Removing installed package instance <SUNWvts> #[...]

2-94 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt ... x SUNWvtsts/reloc/sunwvts/lib/probe, 0 bytes, 0 tape blocks x SUNWvtsts/reloc/sunwvts/lib/probe/sparcv9, 0 bytes, 0 tape blocks spawn pk[...]

2-95 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment This package contains scripts which will be executed with super-user permission during the process of installing this package. Do you wan[...]

2-96 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt inflating: 137324-01/LEGAL_LICENSE.TXT Validating patches... Loading patches installed on the system... Done! Loading patches requested to i[...]

2-97 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment 2762 blocks Installation of <SUNWnfsckr> was successful. x SUNWnfscr, 0 bytes, 0 tape blocks x SUNWnfscr/archive, 0 bytes, 0 tape b[...]

2-98 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt ## Verifying package dependencies. ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Check[...]

2-99 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Enter the IP address of NTP server: Step 5 T ype the IP address for t he NTP server used for your netw ork and press Enter . T ext simila[...]

2-100 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt # pkgadd -d /cdrom/CSCOh036.pkg T ext similar to the follo wing is displayed along with co pyright and trademark in formation: The followin[...]

2-101 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment T ext similar to the follo wing is displayed: Note Ellipsis is used in th e system outpu t to ind icate the omissio n of the patch lists[...]

2-102 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt x ./SUNWftpr/install/i.ftpusers, 1506 bytes, 3 tape blocks x ./SUNWftpr/install/i.manifest, 1503 bytes, 3 tape blocks x ./SUNWftpr/install/[...]

2-103 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment x ./SUNWftpu/install/depend, 1130 bytes, 3 tape blocks x ./SUNWftpu/install/i.none, 2245 bytes, 5 tape blocks x ./SUNWftpu/pkginfo, 630 [...]

2-104 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Portions Copyright (c) 1989 Massachusetts Institute of Technology. Portions Copyright (c) 1997 Stan Barber. Portions Copyright (c) 1997 Ken[...]

2-105 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment THIS SOFTWARE IS PROVIDED BY WASHINGTON UNIVERSITY AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING[...]

2-106 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt The following package is currently installed: SUNWvtsmn SunVTS man pages (i386) 6.4,REV=2007.07.05.13.25 Do you want to remove this package[...]

2-107 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment /opt/SUNWvts/bin/.customtest /opt/SUNWvts/bin <shared pathname not removed> /opt/SUNWvts <shared pathname not removed> ## Up[...]

2-108 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt ## Processing system information. ## Verifying package dependencies. ## Verifying disk space requirements. ## Checking for conflicts with p[...]

2-109 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment SUNWvts SUNWvtsts Installation of patch 137325-01 successful ... Network File System (NFS) client kernel support (Root)(i386) 11.10.0,RE[...]

2-110 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt ... Installation of <SUNWtftpr> was successful. ... NTP, (Root)(i386) 11.10.0,REV=2005.01.21.16.34 Copyright 2005 Sun Microsystems, I[...]

2-111 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Installing the Verification Test Suite Script Package (CSCOh021) The V erification T est Suite (VTS) pro vi des an op tional script d es[...]

2-112 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt ## Executing checkinstall script. CSCOh021 checkinstall log file at /var/tmp/CSCOh021.checkinstall.log Platform is SUNW,Sun-Fire-V210 This [...]

2-113 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Note In order for you to fully test the Ethernet port s, all Ethernet ports must b e configured with v alid IP ad dresses and connecte d[...]

2-114 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt CPU(cputest) CPU Test FPU(fputest) Floating Point Unit Test dtlb(dtlbtest) Data TLB Test l1cache(l1dcachetest) Level 1 Cache Test l2sram(l2[...]

2-115 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Port Address: Unknown Host ID: 18089793 Comm.Ports asy0(serialtest) Port a -- asy0 /dev/term/a : /devices/ ... :a USB-Devices kbd(usbtes[...]

2-116 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Floating Point Unit Test all done Physical Memory Test ( 8064MB) ... Physical Memory Test done Network Test e1000g0 ... Network Test e1000g[...]

2-117 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment LOM or TSALARM devices: Number of SSP devices: 0 ALOM devices: Number of NALM devices: 0 NALM devices: Number of (virtual) CPUs : 2 Note[...]

2-118 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Running a Test in Full Mode When run in full mode, the vts_script tests 100 percent of each di sk surf ace. T o run the test in full mode: [...]

2-119 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Do you want to remove this package? [y,n,?,q] y Step 2 Ty p e y and press Enter to remo ve this package. T e xt similar to the follo win[...]

2-120 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Configuring LOM on Sun Fire V40z Platform Configuring the Service Processor See the section “Configuring the Service Processor” in Chap[...]

2-121 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Figur e 2-9 Cr eate Initial Manag er -level User Step 3 Enter the user ID and passwo rd and conf irm the password. The default user ID/p[...]

2-122 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt Figur e 2-1 1 L OM Screen This completes the LOM co nfigu ration on Sun Fire V40z plat form. Configuring ILOM on the Sun Fire X4640 Platfor[...]

2-123 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment • Disable hardware flo w control (CTS/R TS) • Disable software flo w control (XON/XOFF) Step 3 Connect a serial cable from the RJ-45[...]

2-124 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt set pendingipdiscovery=static set commitpending=true Step 7 Ent er the follo wing command and press Ent er . Y ou can see if the configurat[...]

2-125 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E nvironment Step 2 Ent er the default user ID/passw ord: root/changeme . Click Log I n . This completes the ILOM co nfiguratio n on Sun Fire X4640 p[...]

2-126 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 2 Installin g the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating Environme nt[...]

CH A P T E R 3-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Revised: February 21, 2012 , OL-18083-14 Introduction This chapter describes how to install Cisco PG W 2200 Softswitch and later releases of the Cisco PGW 2200[...]

3-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Before You Start Cautions, Notes, and Tips Caution T o prev ent the system from running out of disk space during inst allation and to a void remov al of data files[...]

3-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Note After the installation of the Cisco PGW 22 00 Softswitch softwa re, you may s[...]

3-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases Step 5 Press Ent er to accept the default di rectory fo r the T oolkit. T ext [...]

3-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Note If you hav e installed the Solaris DiskSuite pack age (CSCOh023) on your syst[...]

3-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases Uncompressing lmbase Installing lmgrd Uncompressing lmreport Installing lmutil[...]

3-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Updating parameters for db-bulkcp Updating parameters for init.tcl Updating parame[...]

3-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases Processing /opt/TimesTen/tt60/PERL/perl.tar ... System logging appears to be c[...]

3-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Done. Installation of <CSCOga003> was successful. Installing /opt/Toolkit/Pa[...]

3-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases SS7 Protocl Family PRI Protocol Family ######################### ############[...]

3-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Would you like to add a protocol set to your system? [y] [y,n,?,q] Step 9 Select [...]

3-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases Installation log can be found in /var/adm/MGC_install.log Note During the Cis[...]

3-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Note Y ou can also download the Cisco Security package (CSCOh020) from Cisco.com.[...]

3-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases T ext similar to the follo wing is displayed: Output will be logged in instal[...]

3-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Step 8 If yo u want to en able Su do, perform the fol lo wing steps. If you do no[...]

3-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases # cd /opt/sfw/etc Step 4 Use vi to open the sudoers f ile. # vi sudoers Step [...]

3-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases Installing the License File if the Cisco PGW 2200 Softswitch is Running If the Ci[...]

3-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 an d High er Installing the Ci sco PGW 2200 Softswitch Software Re lease 9.8 and Hi gher Releases Exit the pro visioning session on the acti ve host and cont inue to Step 1 , [...]

CH A P T E R 4-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 4 Configuring the Cisco PGW 2200 Softswitch Software Revised: February 21, 2012 , OL-18083-14 Introduction This chapter describe s how to configure Release 9.8 of the C isco PGW 2200 Soft switch software. Quick Guide to Configuring th[...]

4-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Before You Start Note For further inf ormation on conf iguring the Cisco PGW 2200 Softswitch softw are, see the Cisco PGW 2200 S oftswitch Release 9.8 Pr ovisioning Guide. Before You Star[...]

4-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Before You Start • Hav e your company's internal sup port and Cisco support contact inform ation readily a vailable so you can get help with the installa tion if needed. (If you [...]

4-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitch Software Configuration Initial Cisco PGW 2200 Softswitch Software Configuration The follo wing required configuration parameters in the XECfgP arm.dat fi[...]

4-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitc h Software Configuration T able 4-3 sho ws the Cisco PGW 2200 Softswitch configu ration parameters. T able 4- 3 Confi gura t io n P ara m et ers Paramet[...]

4-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitch Software Configuration *.SysConnectDataAccess Controls whether data access is enabled or disabled (if the engine attempts to connect to the M M DB or to [...]

4-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitc h Software Configuration TCAP .maxSsnNum Defines the maxi mum number of local subsystem numbers allo wed by the PGW for the entire TCAP IOCC subsystem. [...]

4-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitch Software Configuration Parameters Required for Initial Setup The follo wing table lists the parameter v alues that must be def ined during the initial in[...]

4-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitc h Software Configuration Note For an e xample of an updated configuration f ile, see the “Updated Configur ation File Sample” section on page D-12 .[...]

4-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitch Software Configuration A dialog box displays , warning that the MGC En vironment Conf iguration T ool is for initial system confi guration only . Note T[...]

4-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softswitc h Software Configuration Step 3 Click the Commit b utton after you ha ve f inished setting the parameters. Note The required parameters are the MGC typ[...]

4-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring Grou ps and User s If you set the Operational Mode to Acti ve/Standb y , the XECfg pro gram displays a prompt that al lo ws you to transf er the XE CfgParm.dat.slave file to [...]

4-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring Groups and Users # useradd -u UID -g mgcgrp -d /opt/CiscoMGC/local -s /bin/csh -m username UID is a user ID that is an inte ger from 0 through 2147483647 (e xcluding the nu[...]

4-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SNMP Sup port Resources T ext similar to the follo wing is displayed: Copyright ? 1998-2002, Cisco Systems, Inc. User has minimal access privileges sh-passat mml> T o exit[...]

4-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re so urces Note SNMP managers su ch as the Ci sco Media G ate way Contr oller Node Manager (Cisco MNM) or HP OpenV ie w can be used to receiv e traps. Note Th[...]

4-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SNMP Sup port Resources 2. Enter the follo wing commands to restart the snmp daemon: ps -ef |g rep snmpdm The system wil l display the process ID for the snmp daem on. Restar[...]

4-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re so urces b. To c h e c k critagt : # ps -ef |grep critagt If the critagt process is running, te xt similar to the follo wing is displayed: root 27888 1 0 Ma[...]

4-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SNMP Sup port Resources Adding an SNMP Community Entry Continuing from Step 6 , abo ve (of the section Running the conf ig-snmp Utility ): Step 1 Enter 12 to select snmpCommu[...]

4-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re so urces ReadAndNotifyToAll usm ApplicationsView - ApplicationsView CiscoInternalSignal snmpv1 All All All CiscoInternalSignal snmpv2c All All All CiscoInte[...]

4-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SNMP Sup port Resources For step s on ho w to ex ecute the selections from the SNMPD Config uration Main Menu, see the follo wing sections: • Adding an SNMP Communi ty Entr[...]

4-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re so urces Enter snmpCommunityName: Step 3 Ent er an SnmpCommunityName. Select an SnmpCommu nityName from the list that is displayed in Step 1 . The SnmpCommu[...]

4-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SNMP Sup port Resources =================== Add Trap Menu =================== 1. TargetAddress: 6.6.6.6:0 , TargetAddrParams: v1ExampleParams , IP Mask: 255.255.255.255:0 Wou[...]

4-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re so urces • V erifying the SNMP Conf iguration Migration, page 4-25 The procedure for adding a T rap Destination is now complete. Proceed to th e selection[...]

4-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SNMP Sup port Resources Step 5 Ent er your selection. Fo r detailed procedures fo r your selection, refer to the follo wing list: • Adding an SNMP Communi ty Entry , page 4[...]

4-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re so urces Verifying the SNMP Configuration Migration Perform the follo wing steps to v erify that your ch anges were applied by run ning the conf ig-snmp uti[...]

4-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment #Entry type: snmpCommunityEntry #Format: snmpCommunityIndex (text) # snmpCommunityName (text) # snmpCommunitySecurityName (text) # snmpCommunityC[...]

4-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t • Initializing th e Provisi oning Object Manager , page 4-47 The config uration data fi le, or XECfgParm.dat f ile (located in /opt/CiscoMGC/e[...]

4-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment Note Do not restart the software ye t if you need to conf igure SCP queries or initialize the call screening database. Complete the instructio ns[...]

4-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Ti p If Host X does no t take ov er call processing after sw it chov er , restart the software on Host Y to take over the calls. Check the param[...]

4-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment *.ownT ranspathId T o identify the local Cisco PGW 2200 Softswitch host in a fault tolerant system, enter th e same valu e that you used for *.tr[...]

4-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Specifying IP Addresses T o specify IP addresses, modify the following parame ters in the fi rst section of the XECfgP arm.dat file: *.transpath[...]

4-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment Note If there are two Ethernet interfaces defined on the Cisco PGW 2200 Softswitch, it is mandatory to ha ve these on distinct subn ets. For e x [...]

4-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Configuring Geographic Separation of Active and Standby Hosts This subsection describes ho w to configure Cisco PG W 2 200 Softswitch host s tha[...]

4-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment *.AllISDNLinksFai lCausesFailo ver added in Release 9.5(2) Controls the se verity le vel of the All ISDN IP Conn Fa il alarm. Default: fal se V a[...]

4-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Note If the Acti ve and St andby PGWs are located i n the same subnet, there is no additional conf iguration required for Geographic Separation [...]

4-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment In the Standb y XECfgparm.dat parameter: *.IP_NextHop1 = 172.22.120.1 Step 2 Conf igure the next ho p router IP address. Use an edit or such as v[...]

4-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Configuring Engine Parameters For the en gine to run correctly , you must modify the follo wing parameters in the Engine section of the XECfgPar[...]

4-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment engine.SendHardwar eB lock T o enable the Cisco PGW 2200 Softswitch to send hardware-oriented blocking me ssages for an y blocks that originate f[...]

4-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Setting the Call Cutoff Timer The Cisco PGW 2200 Softswitch call cu toff ti mer is disabled b y default. T o set the call cutof f timer , modify[...]

4-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment Configuring Call Detail Record File Output T o configure call detail record (CDR) f ile output, modify the fol lowin g parameters in the Data Dum[...]

4-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Parameter Modification engine.CDRencodingFormat T o specify the call detail record (C DR) f ile encoding format, enter one of the follo wing va [...]

4-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment Configuring the Clearing Location and Default Location Parameters The ClearingLocation and DefaultLocat ion paramete rs are used to determine a c[...]

4-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Parameter Modification ClearingL ocation This property o verrides the Clearing Location fi eld in Call Cont ext. Change this v alue if you need [...]

4-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment DefaultLocat ion This property o verrides the Defa ult Location f ield in Call Conte xt. Change this v alue if you need to define a customer-spec[...]

4-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Configuring Switchover T o configure switcho ver , modify the follo wing parameters in the fo ve r d section of the XECfgP arm.dat file. : Param[...]

4-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Execu tio n Envir onment fo verd.ipLocalP ortB T o define the secondary local port number used for IP communication, enter a uniq ue number , keeping the follo wing in mi[...]

4-47 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Execution E nvironmen t Note For more information on switcho ver , see the Cisco PGW 2200 Softswitc h Release 9 Operations, Maintenance , and T r oubleshooting Gu ide .[...]

4-48 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies Configuring SCP Queries The SCP translates routing information for t he Adva nced Intelligent Netw ork (AIN) database queries ov er TCAP . This s ection provides[...]

4-49 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries • Config uring the trigger .dat File Attributes, pag e 4-49 • Sample trigger .dat File, pa ge 4-51 War ni ng Do not edit trigger .dat file parameters that a[...]

4-50 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies Configuring the Trans lation Type Attribute Perform the follo wing steps to conf igure the T ranslation T ype (translationT y pe) attrib ute: Step 1 Back up t he[...]

4-51 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries T able 4-8 $Messag eSending T able V alues Sample trigger.dat File #--//****************************************************************************** #--//* * [...]

4-52 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #---------------------------------------------------------- # TT 2: Generic LNP #---------------------------------------------------------- 2 2 1 3 0 0 0 0 0 0 0[...]

4-53 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 7 14 10 16 0 0 0 0 0 0 0 0 #---------------------------------------------------------- # TT 15: INAP LNP Service (Service Key = 1) #----------------------------[...]

4-54 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #---------------------------------------------------------- 14 25 0 0 0 0 0 0 0 0 0 0 #---------------------------------------------------------- # TT28 : INAP C[...]

4-55 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 3 0 0 0 0 0 0 0 0 0 #------------------------------------------------- # MA 9: INAP Prepaid Services InitialDP #------------------------------------------------[...]

4-56 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies inap-lnp-norway 17 inap-pp-initdp 18 inap-pp-charge-atexp 19 inap-pp-bcsm 20 inap-pp-charge-texp 21 inap-pp-charge-final 22 inap-lnp-portugal 23 inap-cs1-initdp [...]

4-57 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ----------------------------------- # MS 6: ANSI AIN 800 NPA-NXX-XXX [...]

4-58 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #----------------------------------------------------------------------------------------- ----------------------------------- # MS 14: INAP InitialDP Query, Fre[...]

4-59 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ----------------------------------- # MS 22: INAP Prepaid Services Ap[...]

4-60 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #--------------------------------------------------------------------------------- # MS 30 : ANSI PRE AIN CNAM # tcapType=PRE AIN, msg=query with permission , as[...]

4-61 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ---- 6 1 3 1 3 0 6 #-------------------------------------------------[...]

4-62 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #----------------------------------------------------------------------------------------- ---- 1 2 0 24 1 0 13 #------------------------------------------------[...]

4-63 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # PS 1: Customer 1 LNP #----------------------------------------------------------------------------------------- ----------------------------------------------[...]

4-64 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies # PS 9: INAP Free Phone, LNP & Carrier Pre-Selection Services #----------------------------------------------------------------------------------------- ----[...]

4-65 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # PS 17: INAP CS1 ApplyChargingReport #----------------------------------------------------------------------------------------- -------------------------------[...]

4-66 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #----------------------------------------------------------------------------------------- ---------- # RR 7: ANSI AIN 800 #-------------------------------------[...]

4-67 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ---------- 0 13 #----------------------------------------------------[...]

4-68 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies # RR 24: INAP Prepaid Services, Expected Response (Continue, FurnishChargeInformation, ReleaseCall) #------------------------------------------------------------[...]

4-69 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ---------- # RR 33: INAP CS1, Expected Response (Continue, RequestRep[...]

4-70 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies # # F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 # MSG OR1 REQ OR2 REQ OR3 REQ OR4 REQ OR5 REQ OR6 REQ OR7 REQ OR8 REQ OR9 REQ OR10[...]

4-71 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # MR 8: CS1/INAP Based CLI Screening, End Message w/ Connect #----------------------------------------------------------------------------------------- --------[...]

4-72 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #----------------------------------------------------------------------------------------- ------------- # MR 16: INAP Prepaid Services, Expected Response (Conti[...]

4-73 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ------------- 4 25 0 30 0 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #---------[...]

4-74 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies ################### $OperationReceiving ################### # # F1 F2 F3 F4 F5 F6 # componentType opClass opCodeFamily opCodeSpecifier opCodeFlag PR #-----------[...]

4-75 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #---------------------------------------------------------------------- 1 1 0 20 1 11 #---------------------------------------------------------------------- # [...]

4-76 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #---------------------------------------------------------------------- # OR 25: INAP CS1, Expected Response (ReleaseCall) #-------------------------------------[...]

4-77 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # componentType opClass opCodeFamily opCodeSpecifier opCodeFlag PR 1 2 0 47 1 32 #---------------------------------------------------------------------- # OR 37[...]

4-78 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies 205 1 1 206 1 1 204 1 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #----------------------------------------------------------------[...]

4-79 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ---------------------------------------------------------------------[...]

4-80 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #----------------------------------------------------------------------------------------- ----------------------------------------------------------------------[...]

4-81 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 211 1 1 212 0 1 213 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #---------------------------------------------------------------[...]

4-82 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies # ParameterAssistingSSPIPRoutingAddress, ServiceInteractionIndicators, ItuAsn1EtcLegIDElem,ItuAsn1EtcCallSegmentIDElem,ItuAsn1EtcCarrierElem #-------------------[...]

4-83 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 239 1 1 240 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #-----------------------------------------------------------------[...]

4-84 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #-------------------------------------------------------------------------- 4 1 2 0 0 0 0 0 0 0 0 0 0 0 0 #------------------------------------------------------[...]

4-85 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # RA 15: INAP LNP for Norway, Unexpected Response #-------------------------------------------------------------------------- 4 1 14 0 0 0 0 0 0 0 0 0 0 0 0 #--[...]

4-86 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring SCP Quer ies #-------------------------------------------------------------------------- # RA 28: INAP CS2, Expected Response(DL, SL, MCS,DFCwithArg,RRBE, ML, CWA) #---------[...]

4-87 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #-------------------------- 3 0 0 0 0 # AD 7: CS1/INAP Based CLI Screeing Data for RESULT_ACTION_RE_TRIGGER_VIA_LCM_COND information # Cond Param Val Trg Pic #-[...]

4-88 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database # Act Null Null Null Null #-------------------------- 0 0 0 0 0 # AD 18: INAP LNP for Portugal Data for RESULT_ACTION_SEND_ACTION_TO_LCM informat[...]

4-89 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database • Ported Numbers • Number T ermination • Multiple Dial Plan • Advice of Char ge II Y o u might want to perform wh ite and blac k list s[...]

4-90 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database Network Requirements In most replication schemes, you need to identif y the name of the host machine on which your data store resides. The operat[...]

4-91 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database 192.168.11.2 UK-A-Netra1125-2 192.168.12.2 UK-A-Netra1125-2.hme1 UK-A-Netra1125-2 <----- Peer PGW hostname Peer Cisco PGW 2200 Softswitch Ho[...]

4-92 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database where activehost is the name (not IP addr ess) of your acti ve host. In the ex ample belo w , the acti ve host is hostx and the standb y host is [...]

4-93 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database T ext similar to the follo wing is displayed: MGC-01 - Media Gateway Controller 2009-10-19 07:48:24.128 CST M RTRV "session=ver20091019:bw[...]

4-94 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database HOWDYDB VA-DEALE Auto Start 5 Last Msg Sent Last Msg Recv Latency TPS RecordsPS Logs ------------- ------------- ------- ------- --------- ---- -[...]

4-95 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring Cisco ITP-Ls Step 4 Copy the acti ve host database to the standby ho st database b y entering the followi ng command as mgcusr: % setup_replication <active host> stan[...]

4-96 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring Disk Monitor During Initial Software Configuration Configuring Disk Monitor During Initial Software Configuration The setting of the disk monitor parameters in t he XECfgParm[...]

4-97 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuri ng the Data Dumper This completes the pro cedures for configur ing disk space monitori ng. If you ha ve question s or need assistance, see the “Obtaining Documentation and [...]

4-98 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Data Dumper to Supp or t Cisco BAMS Step 1 Log into a Cisco PGW 2200 Softswitch as r oot if you are not already logged in. Step 2 Change to the /opt/CiscoMGC/etc director[...]

4-99 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Data Dumper to Su ppo rt Cisco BAMS Step 5 Change to the /opt/CiscoMGC/etc/CONFIG_LIB/n e w directory by entering the follo wing UNIX command: # cd /opt/CiscoMGC/etc/CO[...]

4-100 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch Software Configuring the Data Dumper to Supp or t Cisco BAMS[...]

CH A P T E R 5-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Revised: February 21, 2012 , OL-18083-14 Introduction This chapter describes ho w to migrate your Cisco PGW 2200 Soft switch to the Solaris 10 oper ating sys[...]

5-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Cautions and Notes • Y our system mus t hav e at least two disks. Note If you plan to replace the Cisco P GW 2200 Softswit ch hard disks duri ng the upgrade, ensu[...]

5-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Required Software Caution When upgrading a redund ant system, ve rify that the pom.dat aSync parameter (located in /opt/CiscoMGC/ etc/XECfgP arm.dat) is set to f[...]

5-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 License Install ation • Cisco Installation CD, which includes the ne w release of the Ci sco PGW 2200 Softswitch software. For informatio n on latest patches, see[...]

5-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Figure 5-1 Cisco PGW 2200 Softswitch Host Labeling Cisco PGW 2200 Softswitch supports [...]

5-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes Note If you want to use two ne w disk dri ves t o install the Cisco PGW 2200 Softswitch s[...]

5-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Note The backup file is st ored in the specif ied directory path in the follo wing for[...]

5-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes Step 7 Log in to the PGW host 2 as ro ot . Step 8 Sav e the Cisco PGW 2200 Soft switch co[...]

5-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Note If you want to use two n ew d isk dri ves to i nstall the Cisco PGW 2200 Softswit[...]

5-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes Restoring Data Files Follo w these instructions to restore the Cisco PG W 2200 Softswitc[...]

5-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Step 4 Enter the follo wing command to start the Cisco PGW 2200 Softswitch softw are [...]

5-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes Backing Up the Cisco PGW 2200 Softswitch Configuration Files Before you be gin the migra[...]

5-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Step 5 Stop T imesT en database replication on PGW hosts 1 and 2: % ./delete_replicat[...]

5-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes Caution Y o u are respon sible for pr oviding the b ackup mec hanism and storage locatio[...]

5-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Step 3 Install the Sun Solaris 10 operating syst em using the procedures i n “Loadi[...]

5-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes # cp /var/tmp/saved/ttbackup.tar ./local/ttbackup.tar Step 6 V erify that the etc and di[...]

5-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes ----------rtrv-tt-database-------- # numan-rtrv:cliprefix:clisetname="1111"[...]

5-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes 3. sip-upgrade-0131-2 4. sip-upgrade-0130 ***Current Production Version = sip-upgrade-01[...]

5-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes mml> sw-over::confirm Step 6 When the switchov er is complete, verify th at PGW ho[...]

5-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Migration from Release 9.5 o r 9.6 to Release 9.8 without Platform Changes Do you want to overwrite the production files (y/n)? y removing data files in Production[...]

5-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.7 to Rel ease 9.8 without Platform Changes Step 13 Restart PGW host 2 i n order to ensure that the changes to the pom.dataSync v ariabl[...]

5-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Upgrading Lively from Sparc-based Pl atforms to Opteron-based Platform s Step 9 Log in again a s roo t and uninstall the Cisco PGW 2200 Softswitch software. See th[...]

5-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Upgrading Lively from Sparc-based Pl atforms to Opteron-base d Platfo rms Note T o make sure that you use the latest v ersion of the mgcTTmigrate script, do wnl[...]

5-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Upgrading Lively from Sparc-based Pl atforms to Opteron-based Platform s # ./liveUpgrade.sh export T ext similar to the follo wing is displayed: You are running as[...]

5-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Upgrading Lively from Sparc-based Pl atforms to Opteron-base d Platfo rms and already placed in /var/tmp/saved directory Would you like to continue? [y] [y,n,?,[...]

5-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Upgrading Lively from Sparc-based Pl atforms to Opteron-based Platform s Step 22 V erify the MMDB database is successfully impo rted from the conf iguration backup[...]

5-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Fa lling Back Overview Note When you vie w the alarms, you can find the al arm, “POM-01: 2008-07- 27 21:15:09.910 CST ,ALM=''PEER LINK A F AILURE&[...]

5-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Falling Back to the Cisco PGW 2200 Softswitch Software Release 9.7 w ithout Platform Changes Falling Back to the Cisco PGW 2200 Softswitch Software Release 9.7 wit[...]

5-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9. 6 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9.6 If you en[...]

5-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PG W 2200 Softswitch Release 9.5 or 9.6 5.8 Note “5.8” indicates that the system is running the Solaris 8 operating syst em[...]

5-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9. 6 Step 8 Enter rootdiska at the follo wing prompt: Enter disk name [<disk>,list,[...]

5-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PG W 2200 Softswitch Release 9.5 or 9.6 # vxdiskadm Step 14 Enter 5 to replac e a failed disk. Replace a failed or removed disk[...]

5-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9. 6 Replacement of disk rootdiska in group rootdg with disk device c0t0d0 completed succ[...]

5-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Falling Back to Previous Cisco PGW 2200 Softsw itch Software Releases with Platform Changes Step 1 Install Solaris 8 Operating System using the procedures in the ?[...]

5-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Pla tform Note When you vie w the alarms, you can find the al arm, “POM-01: 2008-07- 27 21:15:09.910 CST ,ALM=[...]

5-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Platform Note The backup file is st ored in the specif ied directory path in the follo wing format: mgc_< hostnam[...]

5-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Pla tform Loading the Sun Solaris 10 Operating Environment Packages Before you install the Cisco PGW 220 0 Softsw[...]

5-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Platform[...]

CH A P T E R 6-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Gu ide OL-18083-14 6 Configuring the Local Area Network Switch Revised: February 21, 2012 , OL-18083-14 Introduction This chapter pro vides a brief o vervie w of the lo cal area network (LAN) switches (Cisco Catalyst Switch family) in your solution. The[...]

6-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Chapter 6 Configuring the Lo cal Area Network Switch Catalyst 2900 XL Series Figur e 6-1 Sample Configurat ion of a Duplex LAN S witch Catalyst 2900 XL Series See the follo wing web sites for hardware and software documentation for the Ca talyst 29 [...]

A-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configura tion Guide OL-18083-14 APPENDIX A XECfgParm.dat File Parameters Revised: February 21, 2012 , OL-18083-14 Introduction This appendix describes the parameters found in the XECfgParm.dat f ile for the Cisco PGW 2200 Softswitch softw are Release 9.x and ho w they are used b [...]

A-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format • ioChanCtl—C ontrols al l channel controllers • ioChanMgr—I/O Channel Managers • ISDNBRI—ISDN BRI • IU A—IUA P arameters • logger—Log Serv er ?[...]

A-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format T able A -1 Cisco PGW 2200 Softswitch 9.x XECfgP ar m.dat File Confi guration P aram eters Configuration Parameter Definition *.actiononchargetableaccessfailure A[...]

A-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.autonomous Enables a process, for example the engine, to be st arted without the syst em. Default: false Note Do not change this v alue. *.charging mode Allo ws y[...]

A-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.ClearingLocation Specifies wh ether to ov erride the default location f ield in the call context for an y call, re gardless of which netw ork de vice released t[...]

A-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format engine.CustSpecif icINAPHandlin g Con trols IN AP (Intelligent Network Applicati on Protocol) beha vior , including advertised applicatio n context. Va l u e s : ?[...]

A-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.DefaultLocation Specifies whether to o ve rride the default location f ield in the call context d ata for calls released by the Cisco PGW 2200 Softswitch. Th is[...]

A-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.DisableCCBSov erT unneledQSIG Specifies the pr otocol used to deli ver Call Back Services messages ov er the network. V alid V alues: • 0—Callback Services ar[...]

A-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.FaxUpspeedC odecPre ference Y o u must sta t ically defi ne the upspeed CODECs in XECfgParm.dat. Y ou can define the first preference and the second preference [...]

A-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.GWClearChannelA lgorithm Specify a clear cha nnel codec or multiple clear channel codecs that you wa nt gate ways to use for data calls in the GWClearChannelAlgo[...]

A-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.homeDirRoot Locati on of the home directory . Default: /opt/CiscoMG C Note Do not change this v alue. *.ICID The Cisco PGW 2200 Softsw itch generates the icid [...]

A-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.ipAddrPe erB Second corresponding peer IP address; u sed for checkpointing and failov er heartbeats. Note If your conf iguration does not use an e xternal card, [...]

A-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.logFileNamePref ix Combined with the .log e xtension, defines the f ilename for log f iles. Default: pl atf orm Example: engine Note This setting can also redi[...]

A-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.logPrio Def ines the initial defau lt logging le vel used by log ging clients when sending messages to the logging server . Use th e set-log MML command to chang[...]

A-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.logPrio ( continued) • Critical —These messages indicate errors so sev ere that a process cannot continue operati ng. Note Do not change this v alue unless[...]

A-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.maxLocationLabels (Added in Release 9.6(1) Specif ies the maximum numbe r of location labels that can be provisioned. V a l id va l u e : 3000 Note Do not change[...]

A-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.MMLManualBlockingCic Allo ws the Cisco PGW 2200 Sof tswitch to manually block channels that do not respond to Release, Resta rt, or Disconnect messages. This f[...]

A-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.OverdecadicDigitsSup ported This parameter control s the method of loading dial plan tables and instructs the system whethe r to expect ov erdecadic (base 16) or[...]

A-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.RedirectingA T ree Used to control A- number screening/analysis via A- digit tree. This para meter allo ws the analysis syst em to use the A-Digit tree for map[...]

A-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.shortdurationcallperiod Allows you t o specify the period used to determine a short duration call. Calls wit h a duration less than the specif ied v alue are re [...]

A-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.SU A.maxSigServices Def ines the maximum number of Sign aling Connection Control Part (SCCP) User Application (SU A) signaling services. It also def ines the m[...]

A-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format *.SysConnectDataAccess Controls whether data access is enabled or disabled (if the engine attempts to connect to the MMDB or to call screening database at st artup[...]

A-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format *.V irtual_IP_Addr2 Specif ies a virtual IP address for a LAN in terface. This IP address must be within the subset of th e IP address defi ned for *.IP_Addr2. D[...]

A-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format diskmonitor .CdrRmFinished Specifies th e number of days to k eep finished CDR files. The default v alue is 0, which means that if th e Ci sc o B AMS is polling th[...]

A-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format diskmonitor .DailyStartT ime Specif ies the time that the disk mo nitor is run each day to remov e files that are older than the v alue set in diskmonitor .MaxK [...]

A-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format diskmonitor .PreserveLogs Specif ies, alon g with diskmonito r .SoftLimit, whether platform log data should be preserv ed or deleted once the disk usage pe rcenta [...]

A-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format diskmonitor .Threshold Erases old log files to free di sk space. The threshold is the percent the disk is full before trimming st arts. Only /v ar/log and /v ar/[...]

A-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format engine.CallLimitingCo ntrol (added in Release 9.6(1) Allo ws enabling or disabling the call l imiting capability on the Cisco PGW 2200 Softsw itch. V a lid values:[...]

A-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format engine.CDRmessageT ypes T o specify the Call Detail Blocks (CDBs are the accounting records written at v arious p oints in a call) that are generated during a ca[...]

A-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format engine.CircuitReserv ation Enables or disa bles the circuit reservat ion feature. V alues: Tr u e , Fa ls e Default: Fals e engine.CMMdlFile Location of call p roc[...]

A-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format engine.mdoDir Location of call processing libr aries. Default: ../lib/ Note Do not change this v alue. engine.SendHardwar eB lock T o enable the Cisco PGW 2 200 [...]

A-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format engine.SysGeneratedCode Determines whether compiled or interpr eted code is used. Va l u e s : • true —System uses compiled co de. • false —System uses int[...]

A-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format engine.SysMdlMemoryReduction Controls use of MDL memory reductions. Prior to Re lease 9.4( 1):values: • 0 —MDL memory reductions not used (maximu m performan[...]

A-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format engine.SysSGCPREtryT imerInterval The interval between S GCP message transmissions, in milliseconds. Default: 1 000 Note Do not change this v alue. engine.SysT rac[...]

A-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format fo verd.abswitchPort Port used for communicati on with the A/B switc h. Va l u e : /dev/term/x Example: /dev/t erm/b Note If your confi guration does not use an [...]

A-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format fo verd.conn3Addr Specifies the address o f the peer system. Example: /dev/term/b If your conf iguration does not use connection number 3, enter /dev/null (default[...]

A-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format fo verd.ipLocalP ortB Port number used for IP c ommunicati on. Default: 0 Note If you ha ve tw o Cisco PGW 2200 Sof tswitch hosts in a fault-tol erant config ura[...]

A-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format GWNetworkContin uity F or network cont inuity test on VISM. V a lid values: 1 —Network continuity is present/requested. 0 —Network continuity is present/reques[...]

A-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format ioChanMgr .e vtTimer Frequency , in millise conds, at which the queue is scanned for messages. Default: 100 Note Do not change this v alue. ioChanMgr .hbT imer T[...]

A-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format ioChanMgr .trace Creates unit test tracing of line and channel state machines. Generates a considerable amount of infor mation to the log. Set to a v alue only whe[...]

A-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format MDLANumberScreening Inv okes the standard A-number screening on the number in the calling number parameter , regardless of whether the call is redirected or not.[...]

A-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format pom.dataSync Indicates that the Pro visioning Object Manager (POM) should sync hronize th e provisioning da ta at sta rtup. V alues: • true —POM is enabled, da[...]

A-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format procM.lo gDBFile Specif ies the location of the log le vel storage. Default: ../var/pr ocMLogT able procM.minCheckHeal thInterv al Seconds at wh ich a process ca[...]

A-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format RadiusAccounting.numb erPort The number of local port to communicate with RADIUS server . One port is used for 256 r ecords. V alue: Any inte ger from 10 to 99. De[...]

A-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format replicator .portDataChannelSend Communication port for the repl icator . Default: 2 968 Note Do not change this v alue. replicator .reconnectInterval Def ines th[...]

A-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format SIP .dns_query_timer (Added in Release 9.8(1)) The amount of time in seconds before a Cisco PGW 2200 Softswitch DNS N APTR query times out. V alid val ues: 1–30 [...]

A-47 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format SIP .tr ansaction_based_dns _query (Added in Release 9.8(1)) Specif ies when the Cisco PG W 2200 Softsw itch sends DNS requests for transport protocol informatio[...]

A-48 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format SIP .udp2tcp_byt e_xo ver Determines the SIP mes sage si ze (in b yte s) abo ve which the Cisco PGW 2200 Softswitch switc hes to TCP trans port. This property appl[...]

A-49 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Para meters Understanding the XECfgParm.da t File Format SipT oIsupInterworkingInd Only ap plicable with SIP to ISUP (o r ISUP to SIP) calls. When the Cisco PGW 2200 Softswitch receives a SIP message with encapsula ted[...]

A-50 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix A XECfgParm.dat File Parameters Understanding the XECfgParm.dat File Format TCAP .maxSsnNum Defines the maximum number of l ocal subsystem numbers allo wed by the PGW fo r the entire TCAP IOCC subsystem. V alue: Any inte ger from 1 to 10. [...]

B-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configura tion Guide OL-18083-14 APPENDIX B Client/Server and S ecure Connectivity Relationships Revised: February 21, 2012 , OL-18083-14 Introduction This appendix describes the client/server and secure connecti vity rela tionships used amon g the dif ferent applications of the C[...]

B-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix B Client/Server a nd Secure Connectivity Relationships Client/Server and Secu re Connectivity Relationships Secure Connectivity Among Cisco PGW 2200 Softswitch Applications Figure B-1 illustrates th e client/serv er relationship an d the se[...]

B-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix B Client/Server and Secure Connectivity Relation ships Clie nt/Ser ver and Secure Connec tivity Relationships Secure Connectivity Between Cis co BAMS Application Platforms Figure B-3 illustrates t he cl ient /server relationshi p and th e s[...]

B-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix B Client/Server a nd Secure Connectivity Relationships Client/Server and Secu re Connectivity Relationships[...]

C-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configura tion Guide OL-18083-14 APPENDIX C HP OpenView Sample SNMP Configuration Revised: February 21, 2012 , OL-18083-14 Configuring the Cisco PGW 2200 Softswitch to Send Alarms to HP OpenView This sample conf iguration sets up a Cisco PGW 2200 Softswitch to send alarms to HP Op[...]

C-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix C HP Op enView Sample SNMP Configuration Configuring the Cisco PGW 2200 Softswitch to Send Alar ms to HP Ope nView Step 8 Under MIB Instance, enter 51 (see table below). Step 9 Under SNMP Set V alue, enter 5 (see table below). Step 10 Click[...]

C-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix C HP OpenView Samp le SNMP Configuration Formatting Trap Message s Step 13 As before, associate the correct MIB instance and SNMP set values wi th the MIB ob ject IDs. Ti p Y ou can v erify the settings b y selecting each MIB OID and clicki[...]

C-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix C HP Op enView Sample SNMP Configuration Formatting Trap Message s Follo wing is an example of an ev ent log message string: SC2200: ID#: $13 Name: $12 Set: $10 MMLname: $4 CatDesc: $11 CompDesc: $3 Severity: $8 CompID: $6 CompType: $5 CatI[...]

D-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configura tion Guide OL-18083-14 APPENDIX D Sample Installation Scripts Revised: February 21, 2012 , OL-18083-14 Introduction This appendix contain s sample outputs from the follo wing: • Sample Output from instal l.sh, page D-1 • Updated Conf iguration File Sample, page D-1 2[...]

D-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Output from install.sh # this package, the installation script will exit. # ########################################################################################## Would you like to install it now? [[...]

D-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Out pu t fro m in s ta ll. sh Uncompressing mmSAgt Uncompressing mmdbd Uncompressing mml Uncompressing pom Uncompressing procM Uncompressing replicator Uncompressing sagt Installing libACE.so Installing[...]

D-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Output from install.sh Modifying /etc/syslog.conf Updating parameters for .odbc.ini Updating parameters for backupDb.sh Updating parameters for restoreDb.sh Set TOS for timesten replicator Untarring Tim[...]

D-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Out pu t fro m in s ta ll. sh End of TimesTen installation. TimesTen installation script returned status 0 Program complete Restoring default schema. Sun Microsystems Inc.SunOS 5.10GenericJanuary 2005 C[...]

D-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Output from install.sh Installation of <CSCOgc001> was successful. Miscellaneous Protocols #################################### ## 01 ## 02 ## #################################### ## BTNUP_BTNR167[...]

D-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Out pu t fro m in s ta ll. sh ####################### ########################################## Q931 Protocol Family ###################### ## 80 ## ###################### ## Q931 ## ## Q931_AUSTRALIA [...]

D-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Output from install.sh Uncompressing Q761_97VER_RUSS_SIPI.mdo Uncompressing Q761_97VER_RUSS_SIPI.so Uncompressing Q761_99VER_BASE_SIPI.mdo Uncompressing Q761_99VER_BASE_SIPI.so Uncompressing cc.mdo Unco[...]

D-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Out pu t fro m in s ta ll. sh Uncompressing ISUPV1_POLI.mdo Uncompressing ISUPV1_POLI.so Uncompressing Q761_ARGENTINA.mdo Uncompressing Q761_ARGENTINA.so Uncompressing Q761_ARGENTINA_C2.mdo Uncompressin[...]

D-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Output from install.sh Uncompressing ISUPV2_AUSTRIAN.mdo Uncompressing ISUPV2_AUSTRIAN.so Uncompressing ISUPV2_CZECH.mdo Uncompressing ISUPV2_CZECH.so Uncompressing ISUPV2_DUTCH.mdo Uncompressing ISUPV[...]

D-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Out pu t fro m in s ta ll. sh Uncompressing Q721_PHILLIPINE.mdo Uncompressing Q721_PHILLIPINE.so Installation of <CSCO60000> was successful. Uncompressing Q767_AUSTRALIA.mdo Uncompressing Q767_AU[...]

D-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Updated Configuration File Sample Updated Configuration File Sample Follo wing is an example of an updated config uration fil e. This f ile is located in /opt/Ci scoMGC/etc/ . #---------------- MGC Environmen[...]

D-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured snmpd.cnf File *.Peer_NextHop7 = 0.0.0.0 *.Peer_NextHop8 = 0.0.0.0 ################################################################ # Improved SIP Failover Support. Setting 0.0.0.0 to both w[...]

D-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured snmpd.cnf File # Entry type: sysName # Entry format: octetString sysName "NSSU - MGC" # Entry type: snmpEnableAuthenTraps # Entry format: integer snmpEnableAuthenTraps 1 # Entry ty[...]

D-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured snmpd.cnf File #Entry type: vacmAccessEntry #Format: vacmGroupName (text) # vacmAccessContextPrefix (text) # vacmAccessSecurityModel (snmpv1, snmpv2c, snmpv2s, usm, http) # vacmAccessSecurit[...]

D-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) #Entry type: snmpTargetAddrEntry #Format: snmpTargetAddrName (text) # snmpTargetAddrTDomain (snmpUDPDomain, snmpIPXDomain, e[...]

D-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.8(1) # # All lines beginning with a '#' are comments and WILL NOT BE READ BY # PROGRAMS. Thus application overrides of [...]

D-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) *.IP_Addr3 = 0.0.0.0 *.IP_Addr4 = 0.0.0.0 # These are Next Hop (router) IP Addresses # They should be used when the Next Hop[...]

D-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.8(1) #*.OwnClli = TTTT-SS-BB-XXX #*.OwnClli = 1-22-33-444 # REQUIRED STARTUP PARAMETERS # DO NOT MOVE THESE PARAMETERS BEYOND THI[...]

D-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) *.tibcoSupport = disable #disable/enable *.PartialCliTypeOfSwitch = 0 #0 to 99 *.PartialCliPnoIdentity = 0 #0 to 999 *.Parti[...]

D-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.8(1) # ioChanMgr.logPrio = Debug # ISDNIP.logPrio = Debug # ISDNL3.logPrio = Debug # ISDNBRI.logPrio = Debug # IUA.logPrio = Debu[...]

D-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) engine.SysSGCPRetryTimerInterval = 1000 # interval between retransmission (msec) engine.SysCLIval = false engine.SysToneDete[...]

D-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.8(1) #The following parameter is to set the call number, these calls will write their buffer into trace file. default value: 200 [...]

D-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) #----------- SIP.maxConnection = 200 # Maximum TCP connextions supported by PGW simultaneourly SIP.connIdlePeriod = 43200 # [...]

D-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.8(1) # NOTE: addresses below must be configured for the target system # - connTypes can be "socket", "serial"[...]

D-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) #----------------- # INAP prepaid properties #----------------- engine.RelINAPCallsAfterSwOver = true #---------------------[...]

D-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.7(3) #-------------------------------- H248.maxNumH248Links = 1000 H248.maximumActionsInTransaction = 64 # Used to set maximum nu[...]

D-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # diskmonitor - disk monitor shell script # XE - Execution Environment # #--------------------------------------------------[...]

D-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.7(3) *.geoSeparation = false # MIGRATED # To disable sip failover, you have to set both Virtual_IP_Addr* to 0.0.0.0. # Set *.sipF[...]

D-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) IUA.maxSigPaths = 1500 # max number of IUA SIGPATHs # per MGC M3UA.maxSgp = 96 # Max number of M3UA SGPs M3UA.maxSigServices[...]

D-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.7(3) # space more rapidly than normal. If the DISK alarm is activated because # of this activity, certain files in /opt/CiscoMGC/[...]

D-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # cfgM #------------- cfgM.recovDbFile = ../var/cfgMRecovery # CfgM recovery info #------------- # Engine #------------- eng[...]

D-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.7(3) engine.CustSpecificINAPHandling = null # MIGRATED engine.DisableMultipleCDRs = 1 # MIGRATED engine.ChargingTariffType = 0 # [...]

D-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) ioChanCtl.ituIsNewZealand = false # for New Zealand MTP3 set appropriate ITU properties #----------- # measM #----------- # [...]

D-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.7(3) # connection 2 parameters foverd.conn2Type = socket # MIGRATED # connection 3 parameters foverd.conn3Type = serial foverd.co[...]

D-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) #---------------------------------- # Disk Monitor Parameters #---------------------------------- diskmonitor.Limit = 7 # MI[...]

D-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.6(1) # If the value is set to, 0: callcutofftime property is measured in hours; 1: callcutofftime property is measured in minutes[...]

D-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.transpathId = 01 # Transpath Id for ASN *.ownTranspathId = 01 *.peerTranspathId = 02 *.MGC_CDR_NODE_ID = BUTTERFLY-HENDRIX[...]

D-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.6(1) #*.OwnClli = TTTT-SS-BB-XXX #*.OwnClli = 1-22-33-444 # REQUIRED STARTUP PARAMETERS # DO NOT MOVE THESE PARAMETERS BEYOND THI[...]

D-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.PartialCliTypeOfSwitch = 0 #0 to 99 *.PartialCliPnoIdentity = 0 #0 to 999 *.PartialCliSwitchNumber = 0 #0 to 999 *.LISuppo[...]

D-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.6(1) # SUA.logPrio = Debug # TALI.logPrio = Debug # TCAP.logPrio = Debug QBE-IOCC.debugFlag = 0 # Specialized "autonomous&qu[...]

D-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.ClearingLocation = 0 # 0 = Normal mapping behaviour, LCM will not override the Clearing Location field in Call Context *.D[...]

D-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.6(1) ioChanMgr.alarmTimer = 0 ioChanMgr.statTimer = 30000 ioChanMgr.IPCTimer = 0 #Channel manager parameters for IPC flow control[...]

D-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # (note: current XE supports 1-second resolution) # # individual timeout values for MML commands: # format is: MML.<verb&[...]

D-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files fo r Cisco PGW 2200 Softswitch Release 9.6(1) #---------------------------------- # Replicator #---------------------------------- replicator.portDataChannelSend = 2968 r[...]

D-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix D Sample Installatio n Scripts Sample Configured XECfgPar m.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.maxNumPril3IOCCs = 3 *.FaxUpspeedCodecPreference = null ISDNBRI.tcpPingPort = 0 *.MMLManualBlockingCic = 0 *.analysisCapab[...]

E-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configura tion Guide OL-18083-14 APPENDIX E Sample Uninstall Scripts Revised: February 21, 2012 , OL-18083-14 Introduction This appendix contain s sample outputs from the follo wing section, Removing a Cisco PGW 2200 Softswitch Softw are V ersion: Sample Output for uninstall.sh, p[...]

E-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Software Version: Sample Output for uninstall.sh Removing /opt/CiscoMGC/etc/migrate/migrate_4_5 Removing /opt/CiscoMGC/etc/migrate/migrate_5_6 Removing /opt/CiscoMGC/etc/migrat[...]

E-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitc h Software Version: Sample Output for un install.sh Removing /opt/CiscoMGC/etc/CONFIG_LIB/4.0_to_5.0/propLookUp.mod Removing /opt/CiscoMGC/etc/CONFIG_LIB/4.0_to_5.0/services.mo[...]

E-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Software Version: Sample Output for uninstall.sh Removing /opt/CiscoMGC/etc/CONFIG_LIB/7.1005_to_7.1006/ Removing /opt/CiscoMGC/etc/CONFIG_LIB/7.1005_to_7.1006/properties.mod R[...]

E-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitc h Software Version: Sample Output for un install.sh Removing /opt/CiscoMGC/etc/CONFIG_LIB/9.5001_to_9.5002/ Removing /opt/CiscoMGC/etc/CONFIG_LIB/9.5001_to_9.5002/components.mo[...]

E-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Software Version: Sample Output for uninstall.sh Saving table CISCO.BLACKLIST_A Saving rows... 0/0 rows saved. Table successfully saved. Saving table CISCO.BLACKLIST_B Saving r[...]

E-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitc h Software Version: Sample Output for un install.sh 608/608 rows saved. Table successfully saved. Saving table CISCO.NAMEDOUTPUTPARAMS Saving index CISCO.NAMEDOUTIDX1 Saving ro[...]

E-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Software Version: Sample Output for uninstall.sh Removal of <CSCOga001> was successful. Removal of <CSCOga000> was successful. Modifying /etc/init.d/inetinit Remova[...]

F-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configura tion Guide OL-18083-14 APPENDIX F Sample LAN Configurations Revised: February 21, 2012 , OL-18083-14 Introduction This appendix contains sample conf igurations for two LAN switches, Cisco Catalyst 5500 A and Cisco Catalyst 55 00 B, and the ro ute switch mo dules. Sample [...]

F-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 A set snmp trap enable bridge set snmp trap enable repeater set snmp trap enable vtp set snmp trap enable auth set snmp trap enable ippermit set snmp trap enable vmp[...]

F-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A clear vtp pruneeligible 1001-1005 set vlan 1 name default type ethernet mtu 1500 said 100001 state active set vlan 2 name green type ethernet mtu 1500 said 100002 st[...]

F-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 A set logging level cdp 2 default set logging level mcast 2 default set logging level dtp 5 default set logging level dvlan 2 default set logging level earl 2 defaul[...]

F-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A #standby ports set standbyports enable ! #module 1 : 2-port 10/100BaseTX Supervisor set module name 1 set vlan 1 1/1-2 set port channel 1/1-2 off set port enable 1/1[...]

F-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 A set port level 3/1-24 normal set port duplex 3/1-24 half set port trap 3/1-24 disable set port name 3/1-24 set port security 3/1-24 disable set port broadcast 3/1-[...]

F-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A set spantree portvlancost 4/1 cost 3099 set spantree portvlancost 4/2 cost 3099 set spantree portvlancost 4/3 cost 3099 set spantree portvlancost 4/4 cost 3099 set s[...]

F-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 A Current configuration: ! version 11.3 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Catalyst_5513A_RSM ! [...]

F-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B Sample Configuration for Cisco Catalyst 5500 B T o view the cur rent conf iguration of the Cisco Catalyst 5500 B, type the foll owing command in pri vileged mod e, a[...]

F-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 B ! #vmps set vmps server retry 3 set vmps server reconfirminterval 60 set vmps tftpserver 0.0.0.0 vmps-config-database.1 set vmps state disable ! #dns set ip dns d[...]

F-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set spantree hello 2 2 set spantree maxage 20 2 set spantree priority 2000 2 #vlan 3 set spantree fwddelay 4 3 set spantree hello 2 3 set spantree maxage 20 3 set s[...]

F-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 B set logging timestamp disable ! #ntp set ntp broadcastclient disable set ntp broadcastdelay 3000 set ntp client disable clear timezone set summertime disable ! #s[...]

F-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set module name 2 set vlan 1 2/1-2 set port channel 2/1-2 off set port enable 2/1-2 set port level 2/1-2 normal set port speed 2/1-2 100 set port duplex 2/1-2 full [...]

F-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 B set port security 4/1-12 disable set port broadcast 4/1-12 0 set port membership 4/1-12 static set port protocol 4/1-12 ip on set port protocol 4/1-12 ipx auto se[...]

F-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-14 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set port level 12/1 normal set port trap 12/1 disable set port name 12/1 set cdp enable 12/1 set cdp interval 12/1 60 set trunk 12/1 on isl 1-1005 set spantree port[...]

F-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-14 Appendix F Sample LA N Configurations Sample Configuration fo r Cisco Catalyst 5500 B standby 3 ip 209.165.200.224 ! interface Vlan4 ip address 209.165.200.224 255.255.255.224 no ip redirects standby 4 timers 1 3 standby 4 preempt standby 4 authent[...]