Vai alla pagina of 324
Manuali d’uso simili
-
Barcode Reader
Datalogic Scanning I GD4100
324 pagine 7.07 mb -
Barcode Reader
Datalogic Scanning 1000I
176 pagine 4.55 mb -
Barcode Reader
Datalogic Scanning XLR
124 pagine 3.97 mb -
Barcode Reader
Datalogic Scanning 90ACC1780
171 pagine 3.86 mb -
Barcode Reader
Datalogic Scanning DS2400
47 pagine 1.19 mb -
Barcode Reader
Datalogic Scanning QS6500BT
336 pagine 1.25 mb -
Barcode Reader
Datalogic Scanning DS4300
53 pagine 0.76 mb -
Barcode Reader
Datalogic Scanning QD 2300
192 pagine 1.15 mb
Un buon manuale d’uso
Le regole impongono al rivenditore l'obbligo di fornire all'acquirente, insieme alle merci, il manuale d’uso Datalogic Scanning PD7100. La mancanza del manuale d’uso o le informazioni errate fornite al consumatore sono la base di una denuncia in caso di inosservanza del dispositivo con il contratto. Secondo la legge, l’inclusione del manuale d’uso in una forma diversa da quella cartacea è permessa, che viene spesso utilizzato recentemente, includendo una forma grafica o elettronica Datalogic Scanning PD7100 o video didattici per gli utenti. La condizione è il suo carattere leggibile e comprensibile.
Che cosa è il manuale d’uso?
La parola deriva dal latino "instructio", cioè organizzare. Così, il manuale d’uso Datalogic Scanning PD7100 descrive le fasi del procedimento. Lo scopo del manuale d’uso è istruire, facilitare lo avviamento, l'uso di attrezzature o l’esecuzione di determinate azioni. Il manuale è una raccolta di informazioni sull'oggetto/servizio, un suggerimento.
Purtroppo, pochi utenti prendono il tempo di leggere il manuale d’uso, e un buono manuale non solo permette di conoscere una serie di funzionalità aggiuntive del dispositivo acquistato, ma anche evitare la maggioranza dei guasti.
Quindi cosa dovrebbe contenere il manuale perfetto?
Innanzitutto, il manuale d’uso Datalogic Scanning PD7100 dovrebbe contenere:
- informazioni sui dati tecnici del dispositivo Datalogic Scanning PD7100
- nome del fabbricante e anno di fabbricazione Datalogic Scanning PD7100
- istruzioni per l'uso, la regolazione e la manutenzione delle attrezzature Datalogic Scanning PD7100
- segnaletica di sicurezza e certificati che confermano la conformità con le norme pertinenti
Perché non leggiamo i manuali d’uso?
Generalmente questo è dovuto alla mancanza di tempo e certezza per quanto riguarda la funzionalità specifica delle attrezzature acquistate. Purtroppo, la connessione e l’avvio Datalogic Scanning PD7100 non sono sufficienti. Questo manuale contiene una serie di linee guida per funzionalità specifiche, la sicurezza, metodi di manutenzione (anche i mezzi che dovrebbero essere usati), eventuali difetti Datalogic Scanning PD7100 e modi per risolvere i problemi più comuni durante l'uso. Infine, il manuale contiene le coordinate del servizio Datalogic Scanning in assenza dell'efficacia delle soluzioni proposte. Attualmente, i manuali d’uso sotto forma di animazioni interessanti e video didattici che sono migliori che la brochure suscitano un interesse considerevole. Questo tipo di manuale permette all'utente di visualizzare tutto il video didattico senza saltare le specifiche e complicate descrizioni tecniche Datalogic Scanning PD7100, come nel caso della versione cartacea.
Perché leggere il manuale d’uso?
Prima di tutto, contiene la risposta sulla struttura, le possibilità del dispositivo Datalogic Scanning PD7100, l'uso di vari accessori ed una serie di informazioni per sfruttare totalmente tutte le caratteristiche e servizi.
Dopo l'acquisto di successo di attrezzature/dispositivo, prendere un momento per familiarizzare con tutte le parti del manuale d'uso Datalogic Scanning PD7100. Attualmente, sono preparati con cura e tradotti per essere comprensibili non solo per gli utenti, ma per svolgere la loro funzione di base di informazioni e di aiuto.
Sommario del manuale d’uso
-
Pagina 1
Po we r S c a n ® PD7100 C orded Linear Imaging Barc ode Reader Pr oduc t Referenc e Guide[...]
-
Pagina 2
Datalogic Scanning, Inc. 959 T erry Street Eugene, Oregon 974 02 T elephone: (541) 683-5700 F ax: (541) 345-7140 An Unpublished W ork - All rig hts reserved. No part of th e contents of this documentation or the procedures described therein may be repr oduced or transmitted in any f orm or by any means without prior written permission of Data logic[...]
-
Pagina 3
Product Reference Guide 1 Table of Contents Chapter 1. Introduction ..................................................................... ................................... ...... 1 About this Guide .......... ................. ................. ................. ................. ................... ............. ...... 1 Manual Overvie w .......[...]
-
Pagina 4
2P o w e r S c a n ® PD7100 Corded Chapter 5. RS-232 ONLY Interface................................ ........................................................... 47 Introduction ....... ................. ................. ................. ................. ............... ................. ....... ...... . 47 RS-232 Standard Factory Setting s .....[...]
-
Pagina 5
Product Reference Guide 3 Label ID Control ....... ................. ................. ................. ................. ............... ................ .. 10 5 Label ID Symbolog y Selection ......... ................. ................... ................. ................... ........ 106 Case Conversion .............. ................. ........[...]
-
Pagina 6
4P o w e r S c a n ® PD7100 Corded GS1 DataBar Limited Enable/Disable .............. ................... ................. ................... .......... 156 GS1 DataBar Limited GS1-128 Emulation .... .............. ........... .......... ........... ........... ........ .... 156 GS1 DataBar Limited Minimum Reads ................... ..............[...]
-
Pagina 7
Product Reference Guide 5 Datalogic 2 of 5 Stitching ........ ................. ................. ................. ................... ................ .. 216 Codabar ... ................. ................. ............... ................. .............. ................. ................. .. .... .. 217 Codabar Enable/D isable ........ .........[...]
-
Pagina 8
6P o w e r S c a n ® PD7100 Corded Appendix A. Technical Specifications ................................................................................ ..... 271 Standard Cable Pinou ts ............... ................. ................ ................. ............... ................. ...... 2 73 Appendix B. Standard Defaults ........... .....[...]
-
Pagina 9
Product Reference Guide 1 Chapter 1 Introduction About this Guide This Product Reference Guide (PRG) is provided for users seeking advanced technical information, including connection, programming, maintenance and specifications. The Quick Reference Guide (QRG) and other publications associated with this product are downloadable free of charge from[...]
-
Pagina 10
Introduction 2P o w e r S c a n ® PD7100 Corded Chapter 11, Symbologies defines options for all symbologies and provides the program- ming barcodes necessary for configuring these features. Appendix A, Technical Specifications lists physical and performance characteristics, as well as environmental and regulatory specifications. It also provides s[...]
-
Pagina 11
Technical Support Product Reference Guide 3 Technical Support Datalogic Website Support The Datalogic website ( www.scanning.da talogic.com ) is the complete source for technical support and information for Datalogic products. The site offers product support, prod- uct registration, warranty information, product manuals, product tech notes, softwar[...]
-
Pagina 12
Introduction 4P o w e r S c a n ® PD7100 Corded NOTES[...]
-
Pagina 13
Product Reference Guide 5 Chapter 2 Getting Started About the Reader Advancements in the LED technology used in this reader significantly improv e the illumination of the target field of view , r esulting in hig her scan efficiency . Whether used in S ingle T rigger or Continuous Mode, the ergonomic design of the reader will help to promote comfort[...]
-
Pagina 14
Getting Started 6P o w e r S c a n ® PD7100 Corded Setting Up the Reader F ollow the steps provided in this section to connect and get your reader up and communicating with its host: 1. Install the Interf ace Cable 2. Select the Interf ace T ype 3. Configure Interf ace Settings (only if not using factory settings for that interface) 4. Configure O[...]
-
Pagina 15
Setting Up the Reader Product Reference Guide 7 Other connection types are described below and illustrated in Figure 2 . USB Connection — Connect the reader to a USB por t on the terminal/PC using the correct USB cable for the interface type you ordered. Reference Figure 2 . IBM Connection — Connect the reader to the IBM port on the terminal/PC[...]
-
Pagina 16
Getting Started 8P o w e r S c a n ® PD7100 Corded Using the Programming Barcodes This manual contains feature descriptions and barcodes which allo w you to reconfigure your reader . Some programming barcode labels, like the Standard Product Def ault Settings on page 9 , requir e only the scan of that single label to enact the change. Most of the [...]
-
Pagina 17
Resetting the Standard Product Defaults Product Reference Guide 9 Resetting the Standard Product Defaults If you aren ’ t sure what programming options are in your r eader , or you ’ ve changed some options and want the factory settings restor ed, scan the Standard Product Def ault Settings barcode below . This will copy the factor y configurat[...]
-
Pagina 18
Getting Started 10 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 19
Product Reference Guide 11 Chapter 3 Interfaces Interface Selection Each reader model will support one of the following sets of host interfaces: General Purpose Models (5 volt supply) RS-232 RS-232 OPOS USB Keyboard Wedge Retail Point of Sal e Models (4 to 14 volt supply) RS-232 RS-232 OPOS USB IBM 46XX Configuring the Interface Scan the programmin[...]
-
Pagina 20
Interfaces 12 PowerScan ® PD7100 Corded Table 1. Available Interfaces RS-232 FEA TURES RS-232 standard interface Select RS232-STD Set RS-232 Interface F eatures star ting on page 47 Select RS232-WN RS-232 Wincor-Nixdorf RS-232 for use with OPOS/UPOS/Jav aPOS Select RS-232 OPOS Select USB-COM-STD a USB Com to simulate RS-232 standard interface IBM [...]
-
Pagina 21
Configuring the Interface Product Reference Guide 13 KEYBO ARD FEA TURES A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Standard K ey Encoding Select KBD-A T Set KEYBOARD WEDGE Interface Features starting on page 73 Select KBD-A T -NK K eyboard W edge for IBM A T PS2 with standard ke y encoding but without e xternal keyboard A T , PS[...]
-
Pagina 22
Interfaces 14 PowerScan ® PD7100 Corded KEYBO ARD — cont. FEA TURES K eyboard Wedge f o r IBM T erminals 31xx, 32xx, 34xx, 37xx make only k eyboard Select KBD-IBM-M Set KEYBOARD WEDGE Interface Fe atures star ting on page 73 Select KBD-IBM-MB K eyboard W edge for IBM T erminals 31xx, 32xx, 34xx, 37xx make break k eyboard K eyboard Wedge f o r DI[...]
-
Pagina 23
Global Interface Features Product Reference Guide 15 Global Interface Features The following interface features are configurable by all interface types. To set features specific to your interface, turn to that section of this manual: • RS-232 ONL Y Interf ace on page 47 • K eyboard I nterface on page 73 • USB-OEM Interf ace on page 87 • IBM[...]
-
Pagina 24
Interfaces 16 PowerScan ® PD7100 Corded USB Suspend Mode This setting enables/disables the ability of USB interfaces to enter suspend mode. ENTER/EXIT PROGRAMMING MODE USB Suspend Mode = Disable USB Suspend Mode = Enable DEF A UL T[...]
-
Pagina 25
Product Reference Guide 17 Chapter 4 General Features Double Read Timeout To prevent a double read of the same label, the Double Read Timeout sets the minimum time allowed between reads of labels of the same symbology and data. If the unit reads a label and sees the same label again within the Double Read Timeout, the second read of the label will [...]
-
Pagina 26
General Features 18 PowerScan ® PD7100 Corded Double Read Timeout — continued ENTER/EXIT PROGRAMMING MODE Double Read Timeout = 0.5 Second Double Read Timeout = 0.6 Second Double Read Timeout = 0.7 Second Double Read Timeout = 0.8 Second Double Read Timeout = 0.9 Second Double Read Timeout = 1 Second[...]
-
Pagina 27
Label Gone Timeout Product Reference Guide 19 Label Gone Timeout This feature sets the time after the last labe l segment is seen before the reader prepares for a new label. The timeout can be set within a range of 10 milliseconds to 2,550 millisec- onds (2.55 seconds) in 10ms increments. Label Gone Timeout does not apply to scan modes that require[...]
-
Pagina 28
General Features 20 PowerScan ® PD7100 Corded Label Gone Timeout — cont. ENTER/EXIT PROGRAMMING MODE Select Label Gone Timeout Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 016 = Timeout of 160 ms[...]
-
Pagina 29
Sleep Mode Timeout Product Reference Guide 21 Sleep Mode Timeout Specifies the timeout value for the reader to enter low power Sleep Mode. ENTER/EXIT PROGRAMMING MODE Sleep Mode Timeout = Disable Sleep Mode Timeout = 500ms Sleep Mode Timeout = 1 Second Sleep Mode Timeout = 2 Seconds Sleep Mode Timeout = 3 Seconds Sleep Mode Timeout = 4 Seconds DEF [...]
-
Pagina 30
General Features 22 PowerScan ® PD7100 Corded Sleep Mode Timeout — continued ENTER/EXIT PROGRAMMING MODE Sleep Mode Timeout = 5 Seconds Sleep Mode Timeout = 6 Seconds Sleep Mode Timeout = 7 Seconds Sleep Mode Timeout = 8 Seconds Sleep Mode Timeout = 9 Seconds Sleep Mode Timeout = 9.9 Seconds (9,900ms max.)[...]
-
Pagina 31
LED and Beeper Indicators Product Reference Guide 23 LED and Beeper Indicators Power On Alert Disables or enables the indication (from the Beeper) that the reader is receiving power. ENTER/EXIT PROGRAMMING MODE P ower On Alert = Disable (No Audib le Indication) P ower On Alert = Four Beeps DEF A UL T[...]
-
Pagina 32
General Features 24 PowerScan ® PD7100 Corded Good Read: When to Indicate This feature specifies when the reader will provide indication (beep and/or flash its green LED) upon successfully reading a barcode. Choices are: • Good Read = I ndicate after decode • Good Read = I ndicate after transmit • Good Read = I ndicate after CTS goes inactiv[...]
-
Pagina 33
LED and Beeper Indicators Product Reference Guide 25 Good Read Beep Type Specifies whether the good read beep has a mono or bitonal beep sound. ENTER/EXIT PROGRAMMING MODE Good Read Beep T ype = Mono Good Read Beep T ype = Bitonal DEF A UL T[...]
-
Pagina 34
General Features 26 PowerScan ® PD7100 Corded Good Read Beep Frequency Adjusts the good read beep to sound at a selectable low, medium or high frequency, se- lectable from the list below. (Controls the beeper’s pitch/tone.) Good Read Beep Length Specifies the duration of a good read beep. ENTER/EXIT PROGRAMMING MODE Good Read Beep F requency = L[...]
-
Pagina 35
LED and Beeper Indicators Product Reference Guide 27 Good Read Beep Length — continued ENTER/EXIT PROGRAMMING MODE Good Read Beep Length = 80 msec Good Read Beep Length = 100 msec Good Read Beep Length = 120 msec Good Read Beep Length = 140 msec Good Read Beep Length = 160 msec Good Read Beep Length = 180 msec Good Read Beep Length = 200 msec DEF[...]
-
Pagina 36
General Features 28 PowerScan ® PD7100 Corded Good Read Beep Volume Selects the beeper volume (loudness) upon a good read beep. There are three selectable volume levels. ENTER/EXIT PROGRAMMING MODE Good Read Beep V olume = Beeper Off Good Read Beep V olume = Low Good Read Beep V olume = Medium Good Read Beep V olume = High DEF A UL T[...]
-
Pagina 37
LED and Beeper Indicators Product Reference Guide 29 Good Read LED Duration This feature specifies the amount of time that the Good Read LED remains on following a good read. The good read LED on time can be set within a range of 10 milliseconds to 2,550 milliseconds (0.001 to 2.55 seconds) in 10ms increments. Follow these instructions to set this [...]
-
Pagina 38
General Features 30 PowerScan ® PD7100 Corded Good Read LED Duration — cont. ENTER/EXIT PROGRAMMING MODE Select Good Read LED Duration Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 020 = Good Read LED stays on for 2 seconds. NO TE Indicat[...]
-
Pagina 39
Scanning Features Product Reference Guide 31 Scanning Features Scan Mode Selects the scan operating mode for the reader. Selections are: Trigger Single — When the trigger is pulled, scanning is activated until one of the fol- lowing occurs: - Scanning Active Time has elapsed - a label has been re ad - the trigger is released This mode is associat[...]
-
Pagina 40
General Features 32 PowerScan ® PD7100 Corded Scan Mode — continued ENTER/EXIT PROGRAMMING MODE Scan Mode = T rigger Single Scan Mode = T rigger Hold Multiple Scan Mode = T rigger Pulse Multiple Scan Mode = Flashing Scan Mode = Alwa ys On Scan Mode = Stand Mode Scan Mode = T rigger Object S ense DEF A UL T[...]
-
Pagina 41
Scanning Features Product Reference Guide 33 Stand Mode T riggered Timeout This feature specifies the time to remain in T r igger Single mode after the trigger is pulled while in Stand Mode . NO TE This timeout is only used when the Scan Mode is configured as Stand Mode . ENTER/EXIT PROGRAMMING MODE Stand Mode T riggered Timeout = 0.5 Seconds Stand[...]
-
Pagina 42
General Features 34 PowerScan ® PD7100 Corded Stand Mode Triggered Timeout — continued ENTER/EXIT PROGRAMMING MODE Stand Mode T riggered Timeout = 6 Seconds Stand Mode T riggered Timeout = 8 Seconds Stand Mode T riggered Timeout = Switch back to T rigger Single on trigger pull[...]
-
Pagina 43
Scanning Features Product Reference Guide 35 Scanning Active Time This setting specifies the amount of time that the reader stays in scan ON state once the state is entered. The range for this setting is from 1 to 255 seconds in 1-second incre- ments. Follow these instructions to set this feature: 1. Determine the desired setting. 2. P ad the resul[...]
-
Pagina 44
General Features 36 PowerScan ® PD7100 Corded Scanning Active Time — cont. ENTER/EXIT PROGRAMMING MODE Select Scanning Active Time Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 005 = Scanning is active for 5 Seconds[...]
-
Pagina 45
Flash On Time Product Reference Guide 37 Flash On Time This feature specifies the ON time for the indicator LED while in Flash Mode. The se- lectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond in- crements. Follow these instructions to set this feature. 1. Determine the desired setting in milliseconds. 2. Divide the[...]
-
Pagina 46
General Features 38 PowerScan ® PD7100 Corded Flash On Time — cont. ENTER/EXIT PROGRAMMING MODE Select Flash ON Time Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 10 = Flash is ON for 1 Second[...]
-
Pagina 47
Flash Off Time Product Reference Guide 39 Flash Off Time This feature specifies the OFF time for the indicator LED while in Flash Mode. The se- lectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond in- crements. Follow these instructions to set this feature. 1. Determine the desired setting in milliseconds. 2. Divide [...]
-
Pagina 48
General Features 40 PowerScan ® PD7100 Corded Flash Off Time — cont. ENTER/EXIT PROGRAMMING MODE Select Flash OFF Time Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 06 = Flash is OFF for 600ms[...]
-
Pagina 49
Stand Mode Sensitivity Product Reference Guide 41 Stand Mode Sensitivity Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high. ENTER/EXIT PROGRAMMING MODE Stand Mode Sensitivity = Low Stand Mode Sensitivity = Medium Stand Mode Sensitivity = High DEF A UL T[...]
-
Pagina 50
General Features 42 PowerScan ® PD7100 Corded Laser Pointer Control Specifies the amount of time that the laser pointer is turned on preliminary to scanning. When the trigger is pressed in Trigger Single Mode, the laser pointer will be activated for the time period configured by this feature. Immediately following this, the reader will start scann[...]
-
Pagina 51
Laser Pointer Period Product Reference Guide 43 Laser Pointer Period This option specifies the period of the laser pointer blink during scanning. The laser pointer will be activated for the time specified by Laser P ointer Control . then start blinking OFF then ON at 50% duty cycle for the duration set by Laser P ointer P eriod . ENTER/EXIT PROGRAM[...]
-
Pagina 52
General Features 44 PowerScan ® PD7100 Corded Laser Pointer Period — cont. Laser P ointer P eriod = 2.5 Seconds (2,500 ms) Laser P ointer P eri od = 3 Seconds (3,000 ms) Laser P ointer P eriod = 3.5 Seconds (3,500 ms) Laser P ointer P eri od = 4 Seconds (4,000 ms) Laser P ointer P eriod = 4.5 Seconds (4,500 ms) Laser P ointer P eri od = 5 Second[...]
-
Pagina 53
Green Spot Duration Product Reference Guide 45 Green Spot Duration Specifies the duration of the good read pointer beam after a good read. ENTER/EXIT PROGRAMMING MODE Green Spot Duration = Disable (Green Spot is Off) Green Spot Duration = Short (300 msec) Green Spot Duration = Medium (500 msec) Green Spot Duration = Long (800 msec) DEF A UL T[...]
-
Pagina 54
General Features 46 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 55
Product Reference Guide 47 Chapter 5 RS-232 ONLY Interface Introduction Use the programming barcodes in this chapter if modifications to the standard RS- 232 interface settings are necessary to meet your system’ s requirements. Additional settings which apply to both the RS-232 and USB interfaces are available in Chapter 6, RS-232/USB-Com Interf [...]
-
Pagina 56
RS-232 ONLY Interface 48 PowerScan ® PD7100 Corded Baud Rate — continued ENTER/EXIT PROGRAMMING MODE Baud Rate = 9600 Baud Rate = 19,200 Baud Rate = 38,400 Baud Rate = 57,600 Baud Rate = 115,200 DEF A UL T[...]
-
Pagina 57
Data Bits Product Reference Guide 49 Data Bits This parameter allows the reader to interface with devices requiring a 7-bit or 8-bit ASCII protocol for sending and receiving data. ENTER/EXIT PROGRAMMING MODE 7 Data Bits 8 Data Bits DEF A UL T[...]
-
Pagina 58
RS-232 ONLY Interface 50 PowerScan ® PD7100 Corded Stop Bits The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving device for the next character in the serial data stream. The number of stop bits selected (one or two) depends on the number the receiving terminal is progra[...]
-
Pagina 59
Parity Product Reference Guide 51 Parity This feature specifies parity required for sending and receiving data. A parity check bit is the most significant bit of each ASCII coded character . Select the parity type according to host device requirements. • Select N one when no parity bit is required. • Select O dd parity and the pari ty bit value[...]
-
Pagina 60
RS-232 ONLY Interface 52 PowerScan ® PD7100 Corded Handshaking Control The data interface consists of an RS-232 port designed to operate either with or with- out the hardware handshaking lines, Request to Send (R TS), and Clear to Send (CTS). Handshaking Control includes the following options: • R TS — R TS is asserted during transmissions. CT[...]
-
Pagina 61
Product Reference Guide 53 Chapter 6 RS-232/USB-Com Interfaces Introduction The programming barcodes in this chapter allow modifications to the standard RS- 232 and USB-Com interfaces. Standard Factory Settings Reference Appendix B, Standard Def aults for a listing of standard factory settings.[...]
-
Pagina 62
RS-232/USB-Com Interfaces 54 PowerScan ® PD7100 Corded Intercharacter Delay This parameter specifies the intercharacter de lay be tween the end of one character and the beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in 10ms increments. A setting of zero specifies no delay . T o set the delay: 1. Determin[...]
-
Pagina 63
Intercharacter Delay Product Reference Guide 55 Intercharacter Delay — cont. ENTER/EXIT PROGRAMMING MODE Intercharacter Dela y = No Delay Select Intercharacter Dela y Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 00 = No Intercharacter Del[...]
-
Pagina 64
RS-232/USB-Com Interfaces 56 PowerScan ® PD7100 Corded Beep On ASCII BEL When this parameter is enabled, the reader issu es a beep when a <BEL> character is detected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal entry or other important event. Beep On Not on File This option enables/disables t[...]
-
Pagina 65
ACK NAK Options Product Reference Guide 57 ACK NAK Options This enables/disables the ability of the reader to support the RS-232 ACK/NAK pro- tocol. When configured, the reader and/or host sends an “ACK” when it receives data properly , and sends “NAK” when the data is in error . Options are: •D i s a b l e • Enable for label transmissi[...]
-
Pagina 66
RS-232/USB-Com Interfaces 58 PowerScan ® PD7100 Corded ACK Character This setting specifies an ASCII charact er or hex value to be used as the ACK charac- ter . ASCII characters or any hex value from 0 to 0xFF can be selected. T o set this feature: 1. Determine the desired character or value. 2. U se the ASCII Char t on the inside back cover of th[...]
-
Pagina 67
ACK NAK Options Product Reference Guide 59 ACK Character — cont. ENTER/EXIT PROGRAMMING MODE Select AC K Character Setting DEF A UL T 0x06 ‘ACK’ Character[...]
-
Pagina 68
RS-232/USB-Com Interfaces 60 PowerScan ® PD7100 Corded NAK Character This setting specifies an ASCII character or hex value to be used as the NAK charac- ter . ASCII characters or any hex value from 0 to 0xFF can be selected. T o set this feature: 1. Determine the desired character or value. 2. U se the ASCII Char t on the inside back cover of thi[...]
-
Pagina 69
ACK NAK Options Product Reference Guide 61 NAK Character — cont. ENTER/EXIT PROGRAMMING MODE Select NAK Character Setting DEF A UL T 0x15 ‘NAK’ Character[...]
-
Pagina 70
RS-232/USB-Com Interfaces 62 PowerScan ® PD7100 Corded ACK NAK Timeout Value This option specifies the amount of time the reader waits for an ACK character from the host following label transmission. The selectable timeout range is 200 millisec- onds to 15,000ms (15 seconds) in 200ms increments. A selection of 0 disables the timeout. T o set this [...]
-
Pagina 71
ACK NAK Options Product Reference Guide 63 ACK NAK Timeout Value — cont. ENTER/EXIT PROGRAMMING MODE Select ACK NAK Timeout V alue Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 01 ACK NAK T imeout value is 200ms[...]
-
Pagina 72
RS-232/USB-Com Interfaces 64 PowerScan ® PD7100 Corded ACK NAK Retry Count This feature specifies the number of times the reader retries a label transmission due to a retry condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and a selection of 255 specifies unlimited retries. T o set this feature: 1. Dete[...]
-
Pagina 73
ACK NAK Options Product Reference Guide 65 ACK NAK Retry Count — cont. ENTER/EXIT PROGRAMMING MODE Select ACK NAK Retry Count Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 003 = 3 Retries[...]
-
Pagina 74
RS-232/USB-Com Interfaces 66 PowerScan ® PD7100 Corded ACK NAK Error Handling This feature specifies the method the reader uses to handle receive errors detected while waiting for an ACK character from the host. Options are: • Ignore err ors detected • P rocess error as valid A CK character • P rocess error as valid NAK character ENTER/EXIT [...]
-
Pagina 75
Indicate Transmission Failure Product Reference Guide 67 Indicate Transmission Failure This option enables/disables the reader ’ s ability to sound an error beep to indicate a transmission failure while in ACK/NAK mode. ENTER/EXIT PROGRAMMING MODE Indicate T ransmission F ailure = Disable Indication Indicate T ransmission F ailure = Enable Indica[...]
-
Pagina 76
RS-232/USB-Com Interfaces 68 PowerScan ® PD7100 Corded Disable Character Specifies the value of the RS-232 host command used to disable the reader . ASCII characters or any hex value from 0 to 0xFF can be selected. T o set the value: 1. Determine the desired character or value. A setting of 0xFF indicates the the D is- able Character is not used ([...]
-
Pagina 77
Disable Character Product Reference Guide 69 Disable Character — cont. ENTER/EXIT PROGRAMMING MODE Select Disable Character Setting DEF A UL T 0x44 = Disable Character is ‘D’[...]
-
Pagina 78
RS-232/USB-Com Interfaces 70 PowerScan ® PD7100 Corded Enable Character Specifies the value of the RS-232 host command used to enable the reader . ASCII characters or any hex value from 0 to 0xFF can be selected. T o set this feature: Determine the desired character or value. A setting of 0xFF indicates the the Enable Character is not used (not av[...]
-
Pagina 79
Enable Character Product Reference Guide 71 Enable Character — cont. ENTER/EXIT PROGRAMMING MODE Select Enable Char acter Setting DEF A UL T 0x45 = Enable Character is ‘E’[...]
-
Pagina 80
RS-232/USB-Com Interfaces 72 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 81
Product Reference Guide 73 Chapter 7 Keyboard Interface Introduction Use the programming barcodes in this chapter to select options for USB Keyboard and Wedge Interfaces. Standard Factory Settings Reference Appendix B, Standard Defaults for a listing of standard factory settings. Scancode Tables Information about control character emulation which a[...]
-
Pagina 82
Keyboard Interface 74 PowerScan ® PD7100 Corded Country Mode This feature specifies the country/language supported by the keyboard. Only the following interfaces support ALL Country Modes. • USB Keyboard (without alternate key encoding) • A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Std Key Encoding • Keyboard W edge for IBM[...]
-
Pagina 83
Country Mode Product Reference Guide 75 Country Mode — continued ENTER/EXIT PROGRAMMING MODE Countr y Mode = Denmark Suppor ts only the interf aces listed in theCountr y Mode f eature description. Country Mode = France Country Mode = Ger many Suppor ts only the interf aces listed in theCountr y Mode feature description. Country Mode = Hungar y Co[...]
-
Pagina 84
Keyboard Interface 76 PowerScan ® PD7100 Corded Country Mode — continued ENTER/EXIT PROGRAMMING MODE Country Mode = Poland Suppor ts only the interf aces listed in theCountr y Mode f eature description. Suppor ts only the interf aces listed in theCountr y Mode feature description. Country Mode = Portugal Country Mode = Romania Suppor ts only the[...]
-
Pagina 85
Caps Lock State Product Reference Guide 77 Caps Lock State This option specifies the format in which the reader sends character data. This applies to keyboard wedge interfaces. This does not apply when an alternate key encoding keyboard is selected. Numlock This option specifies the setting of the Numbers Lock (Numlock) key while in keyboard wedge [...]
-
Pagina 86
Keyboard Interface 78 PowerScan ® PD7100 Corded Send Control Characters This feature Specifies how the reader transmits ASCII control characters to the host. Ref- erence Appendix F, Scancode Tables for more information about control characters. Options are as follows: Control Character 00 — Characters from 00 to 0x1F are sent as control characte[...]
-
Pagina 87
Wedge Quiet Interval Product Reference Guide 79 Wedge Quiet Interval This option specifies the amount of time to look for keyboard activity before the read- er breaks the keyboard connection in order to transmit data to host. The selectable range for this feature is from 0 to 990ms in 10ms increments. Follow these instructions to set this feature: [...]
-
Pagina 88
Keyboard Interface 80 PowerScan ® PD7100 Corded Wedge Quiet Interval — cont. ENTER/EXIT PROGRAMMING MODE Select Wedge Quiet In ter val Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 10 = Quiet Interval of 100 ms[...]
-
Pagina 89
Intercharacter Delay Product Reference Guide 81 Intercharacter Delay This parameter specifies the intercharacter de lay be tween the end of one character and the beginning of the next. The delay can be set within a range of zero (0) to 990 milliseconds in 10ms increments. A setting of zero specifies no delay . T o set the delay: 1. Determine the de[...]
-
Pagina 90
Keyboard Interface 82 PowerScan ® PD7100 Corded Intercharacter Delay — cont. ENTER/EXIT PROGRAMMING MODE Intercharacter Dela y = No Delay Select Intercharacter Dela y Setting Make a mista ke? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 00 = No Intercharacter De[...]
-
Pagina 91
Intercode Delay Product Reference Guide 83 Intercode Delay Specifies the delay between labels transmitted to the host for this interface. The selectable range for this feature is from 0 to 99 seconds. Follow these instructions to set this feature: 1. Determine the desired setting. 2. P ad the number with leading zeroes to yield two digits. F or exa[...]
-
Pagina 92
Keyboard Interface 84 PowerScan ® PD7100 Corded Intercode Delay — cont. ENTER/EXIT PROGRAMMING MODE Set Intercode Delay Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 00 = No Wedge Intercode Delay[...]
-
Pagina 93
USB Keyboard Speed Product Reference Guide 85 USB Keyboard Speed This option specifies the USB poll rate for a USB keyboard. NO TE This feature applies ONL Y to the USB Keyboar d interface . ENTER/EXIT PROGRAMMING MODE USB K eyboard Speed = 1ms USB K eyboard Speed = 2ms USB K eyboard Speed = 3ms USB K eyboard Speed = 4ms USB K eyboard Speed = 5ms D[...]
-
Pagina 94
Keyboard Interface 86 PowerScan ® PD7100 Corded USB Keyboard Speed — continued ENTER/EXIT PROGRAMMING MODE USB K eyboard Speed = 6ms USB K eyboard Speed = 7ms USB K eyboard Speed = 8ms USB K eyboard Speed = 9ms USB K eyboard Speed = 10ms[...]
-
Pagina 95
Product Reference Guide 87 Chapter 8 USB-OEM Interface Introduction Feature settings for USB interfaces differ depending upon which host type the reader will be connected with. Use the feature settings in this chapter and Chapter 9, IBM 46XX Interface to specifically configure for the USB-OEM interface. Other USB interfaces are included in the appr[...]
-
Pagina 96
USB-OEM Interface 88 PowerScan ® PD7100 Corded USB-OEM Device Usage The USB-OEM protocol allows for the reader to be identified as one of two different types of barcode scanners. Depending on what other scanners you may already have con- nected to a USB-OEM POS, you may need to change this setting to enable all devices to communicate. Options are:[...]
-
Pagina 97
Product Reference Guide 89 Chapter 9 IBM 46XX Interface Introduction Use the barcodes in this section to configure programmable features for available IBM 46XX interfaces. IBM Standard Factory Settings Reference Appendix B, Standard Defaults for a listing of standard factory settings.[...]
-
Pagina 98
IBM 46XX Interface 90 PowerScan ® PD7100 Corded 46xx Number of Host Resets Specifies how many consecutive resets are processed before the reader starts a five-second period to allow the user to enter Programming Mode and configure the reader. The con- figurable range for this feature is 1 to 15 resets. ENTER/EXIT PROGRAMMING MODE 46xx Number of Ho[...]
-
Pagina 99
46xx Number of Host Resets Product Reference Guide 91 46xx Number of Host Resets — cont. ENTER/EXIT PROGRAMMING MODE 46xx Number of Host Resets = 7 46xx Number of Host Resets = 8 46xx Number of Host Resets = 9 46xx Number of Host Resets = 10 46xx Number of Host Resets = 11 46xx Number of Host Resets = 12[...]
-
Pagina 100
IBM 46XX Interface 92 PowerScan ® PD7100 Corded 46xx Number of Host Resets — cont. ENTER/EXIT PROGRAMMING MODE 46xx Number of Host Resets = 13 46xx Number of Host Resets = 14 46xx Number of Host Resets = 15[...]
-
Pagina 101
Transmit Labels in Code 39 Format Product Reference Guide 93 Transmit Labels in Code 39 Format This feature enable/disables translation to Code 39 before transmitting label data to an IBM-46XX or a USB-OEM host. Only the symbology identifier is modified for the translation. The data is not converted to Code 39 or verified to be valid for Code 39. O[...]
-
Pagina 102
IBM 46XX Interface 94 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 103
Product Reference Guide 95 Chapter 10 Data Editing Data Editing Overview When a barcode is scanned, additional information can be sent to the host computer along with the barcode data. This combination of barcode data and supplementary user- defined data is called a “message string.” The features in this chapter can be used to build specific us[...]
-
Pagina 104
Data Editing 96 PowerScan ® PD7100 Corded Please Keep In Mind... • M odifying a message string is not a ma ndatory requirement. Data editing is sophisticated feature allo wing highly customizable output for advanced users. F ac- tory default settings for data editing is typically set to NONE. • A prefix or suffix may be applied (reference the [...]
-
Pagina 105
Global Prefix/Suffix Product Reference Guide 97 5. If less than the expected string of 20 characters are selected, scan the ENTER/ EXIT barcode to terminate the string. 6. Scan the ENTER/EXIT barcode once again to exit P rogramming M ode. 7. The resulting message string would appear as follo ws: Scanned barcode data:12345 Resulting message string o[...]
-
Pagina 106
Data Editing 98 PowerScan ® PD7100 Corded Global AIM ID AIM label identifiers (as opposed to custom characters you select yourself as with label identifiers) can be included with scanned barcode data. AIM label identifiers consist of three characters as follows: • A close brace character (ASCII ‘]’), followed by ... • A code character (see[...]
-
Pagina 107
Global AIM ID Product Reference Guide 99 Global AIM ID — continued ENTER/EXIT PROGRAMMING MODE Global AIM ID = Disable Global AIM ID = Enable DEF A UL T[...]
-
Pagina 108
Data Editing 100 PowerScan ® PD7100 Corded GS1-128 AIM ID If Global AIM ID is disabled, the AIM ID for GS1-128 can be enabled/disabled inde- pendently. The AIM ID for GS1-128 is a ]C1, ]C2 or ]C3. AIM IDs for other symbologies can be enabled/disabled independently as well. Contact Customer Support for assistance. ENTER/EXIT PROGRAMMING MODE GS1-12[...]
-
Pagina 109
Label ID Product Reference Guide 101 Label ID A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-0xFF), used to identify a barcode (symbology) type. It can be appended previ- ous to or following the transmitted barcode data depending upon how this option is en- abled. This feature provides options for con[...]
-
Pagina 110
Data Editing 102 PowerScan ® PD7100 Corded CODE128 # 230000 T 540000 CODE39 * 2A0000 V 560000 CODE4 4 340000 4 340000 CODE5 j 6A0000 j 6A0000 CODE93 & 260000 U 550000 GS1 D A T ABAR OMNIDIRECTIONAL R4 523400 u 750000 GS1 D A T ABAR EXP ANDED RX 525800 t 740000 GS1 D A T ABAR LIMITED RL 524C00 v 760000 D A T ALOGIC 2OF5 s 730000 s 730000 GS1-12[...]
-
Pagina 111
Label ID Product Reference Guide 103 Label ID: Set Individually Per Symbology To configure a Label ID individually for a single symbology: 1. Scan the ENTER/EXIT barcode. 2. Select Label ID position as either BEFORE (Enable as P refix) or AFTER (Enable as suffix) by scanning the appropriate bar code in the section Label ID Control on page 105 . Ref[...]
-
Pagina 112
Data Editing 104 PowerScan ® PD7100 Corded Label ID — continued Table 18. Label ID Examples STEP ACTION EXAMPLES 1. Scan the ENTER/EXIT barcode (Scanner enters Programming Mode) 2. Determine placement of the Label ID characters BEFORE or AFTER with regard to scanned data using Label ID Control on page 105 Enable as Prefix Enable as Suffix Enable[...]
-
Pagina 113
Label ID Product Reference Guide 105 Label ID — continued Label ID Control This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given symbology type. ENTER/EXIT PROGRAMMING MODE Label ID T ransmission = Disable Label ID T ransmission = Enable as Prefix Label ID T ransmission = Enable as Suffix CANCEL Make a mis[...]
-
Pagina 114
Data Editing 106 PowerScan ® PD7100 Corded Label ID — continued Label ID Symbology Selection This option selects the symbology for which a Label ID is to be configured. See Label ID on page 101 for full instructions. ENTER/EXIT PROGRAMMING MODE Set UPC-A Label ID Character(s) Set UPC-A/P2 Label ID Character(s) Set UPC-A/P5 Label ID Character(s) [...]
-
Pagina 115
Label ID Product Reference Guide 107 Label ID — continued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured. See Label ID on page 101 for full instructions. ENTER/EXIT PROGRAMMING MODE Set UPC-E/P5 Label ID Character(s) Set UPC-E/GS1-128 Label ID Character(s) Set EAN 13 Label ID [...]
-
Pagina 116
Data Editing 108 PowerScan ® PD7100 Corded Label ID — continued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured. See Label ID on page 101 for full instructions. ENTER/EXIT PROGRAMMING MODE Set EAN 8 Label ID Character(s) Set EAN 8/P2 Label ID Character(s) Set EAN 8/P5 Label ID[...]
-
Pagina 117
Label ID Product Reference Guide 109 Label ID — continued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured. See Label ID on page 101 for full instructions. ENTER/EXIT PROGRAMMING MODE Set GTIN/P5 Label ID Character(s) Set GTIN/GS1-128 Label ID Character(s) Set GS1 DataBar Omnidi[...]
-
Pagina 118
Data Editing 110 PowerScan ® PD7100 Corded Label ID — continued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured. See Label ID on page 101 for full instructions. ENTER/EXIT PROGRAMMING MODE Set Code 32 Label ID Character(s) Set Code 128 Label ID Character(s) Set ISBT 128 Label [...]
-
Pagina 119
Label ID Product Reference Guide 111 Label ID — continued Label ID Symbology Selection — continued This option selects the symbology for which a Label ID is to be configured. See Label ID on page 101 for full instructions. ENTER/EXIT PROGRAMMING MODE Set Standard 2 of 5 Label ID Character(s) Set Code 4 Label ID Character(s) Set Code 5 Label ID [...]
-
Pagina 120
Data Editing 112 PowerScan ® PD7100 Corded Case Conversion This feature allows conversion of the case of all alphabetic characters to upper or lower case. Character Conversion Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs represented in hexadecimal ASCII values. The first character in the pair is t[...]
-
Pagina 121
Character Conversion Product Reference Guide 113 conversion: BB22BB22. The A characters were converted to B characters and the 1 characters were converted to 2 characters. Nothing is done with the last two character pairs, since they are all FF. To set Character Conversion: 1. Scan the ENTER/EXIT barcode. 2. Scan the “Configure Character Conversi[...]
-
Pagina 122
Data Editing 114 PowerScan ® PD7100 Corded Character Conversion — continued ENTER/EXIT PROGRAMMING MODE Configure Character Con version DEF A UL T 0xFFFFFFFFFFF FFFFF (No character conversion)[...]
-
Pagina 123
Product Reference Guide 115 Chapter 11 Symbologies Introduction The reader supports the following symbologies (barcode types). Options for each sym- bology are included in this chapter. 1D Symbologies Standard Factory Settings for Symbologies Default settings are indicated at each feature/option with a green arrow. Also reference Appendix B, Standa[...]
-
Pagina 124
Symbologies 116 PowerScan ® PD7100 Corded UPC-A The following options apply to the UPC-A symbology. UPC-A Enable/Disable When disabled, the reader will not read UPC-A barcodes. UPC-A Check Character Transmission Enable this option to transmit the check character along with UPC-A barcode data. ENTER/EXIT PROGRAMMING MODE UPC-A = Disable UPC-A = Ena[...]
-
Pagina 125
UPC-A Product Reference Guide 117 UPC-A — cont. Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13. UPC-A Number System Character Transmission This feature enables/disables transmission of the UPC-A number system character. ENTER/EXIT PROGRAM[...]
-
Pagina 126
Symbologies 118 PowerScan ® PD7100 Corded UPC-A — cont. In-Store Minimum Reads This feature specifies the minimum number of consecutive times an in-store label must be decoded before it is accepted as good read. In-store labels are defined as UPC-A labels with a number-system character of 2 or 4 as well as EAN 8 and EAN 13 labels with a Flag1 ch[...]
-
Pagina 127
UPC-E Product Reference Guide 119 UPC-E The following options apply to the UPC-E symbology. UPC-E Enable/Disable When disabled, the reader will not read UPC-E barcodes. UPC-E Check Character Transmission Enable this option to transmit the check character along with UPC-E barcode data. ENTER/EXIT PROGRAMMING MODE UPC-E = Disable UPC-E = Enable DEF A[...]
-
Pagina 128
Symbologies 120 PowerScan ® PD7100 Corded UPC-E — cont. Expand UPC-E to EAN-13 Expands UPC-E data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13. Expand UPC-E to UPC-A Expands UPC-E data to the UPC-A data format. ENTER/EXIT PROGRAMMING MODE UPC-E to EAN-13 = Don’t Expand UPC-E[...]
-
Pagina 129
UPC-E Product Reference Guide 121 UPC-E — cont. UPC-E Number System Character Transmission This feature enables/disables transmission of the UPC-E system number character. ENTER/EXIT PROGRAMMING MODE UPC-E Number System Character = Do not tr ansmit UPC-E Number System Character = T ransmit DEF A UL T[...]
-
Pagina 130
Symbologies 122 PowerScan ® PD7100 Corded UPC-E — cont. UPC-E Minimum Reads This feature specifies the minimum number of consecutive times a UPC-E label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE UPC-E Minimum Reads = 1 UPC-E Minimum Reads = 2 UPC-E Minimum Reads = 3 UPC-E Minimum Reads = 4 DEF A UL T[...]
-
Pagina 131
GTIN Formatting Product Reference Guide 123 GTIN Formatting This feature enables/disables the ability to convert UPC-E, UPC-A, EAN 8, and EAN 13 labels into the GTIN 14-character format. NO TE If add-on information is present on the base la bel prior to the con ver- sion taking place, the addon information will be appended to the con- verted GTIN l[...]
-
Pagina 132
Symbologies 124 PowerScan ® PD7100 Corded EAN 13 The following options apply to the EAN 13 (Jan 13) symbology. EAN 13 Enable/Disable When disabled, the reader will not read EAN 13/JAN 13 barcodes. EAN 13 Check Character Transmission Enable this option to transmit the check character along with EAN 13 barcode data. ENTER/EXIT PROGRAMMING MODE EAN 1[...]
-
Pagina 133
EAN 13 Product Reference Guide 125 EAN 13 — cont. EAN-13 Flag 1 Character Enables/disables transmission of an EAN/JAN13 Flag1 character. The Flag 1 character is the first character of the label. ENTER/EXIT PROGRAMMING MODE EAN-13 Flag 1 Char= Don’t transmit EAN-13 Flag 1 Char= T ransmit DEF A UL T[...]
-
Pagina 134
Symbologies 126 PowerScan ® PD7100 Corded EAN-13 ISBN Conversion This option enables/disables conversion of EAN 13/JAN 13 Bookland labels starting with 978 to ISBN labels. ENTER/EXIT PROGRAMMING MODE EAN-13 ISBN Conv ersion = Disable EAN-13 ISBN Conv ersion = Convert to ISBN DEF A UL T[...]
-
Pagina 135
EAN 13 Product Reference Guide 127 EAN 13 — cont. EAN 13 Minimum Reads This feature specifies the minimum number of consecutive times an EAN 13 label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE EAN 13 Minimum Reads = 1 EAN 13 Minimum Reads = 2 EAN 13 Minimum Reads = 3 EAN 13 Minimum Reads = 4 DEF A UL T[...]
-
Pagina 136
Symbologies 128 PowerScan ® PD7100 Corded EAN 8 The following options apply to the EAN 8 (Jan 8) symbology. EAN 8 Enable/Disable When disabled, the reader will not read EAN 8/JAN 8 barcodes. EAN 8 Check Character Transmission Enable this option to transmit the check character along with EAN 8 barcode data. ENTER/EXIT PROGRAMMING MODE EAN 8 = Disab[...]
-
Pagina 137
EAN 8 Product Reference Guide 129 EAN 8 — cont. Expand EAN 8 to EAN 13 Enable this option to expand EAN 8/JAN 8 labels to EAN 13/JAN 13. ENTER/EXIT PROGRAMMING MODE Expand EAN 8 to EAN 13 = Disable Expand EAN 8 to EAN 13 = Enable DEF A UL T[...]
-
Pagina 138
Symbologies 130 PowerScan ® PD7100 Corded EAN 8 — cont. EAN 8 Minimum Reads This feature specifies the minimum number of consecutive times an EAN 8 (Jan 8) label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE EAN 8 Minimum Reads = 1 EAN 8 Minimum Reads = 2 EAN 8 Minimum Reads = 3 EAN 8 Minimum Reads = 4 DEF A UL[...]
-
Pagina 139
UPC/EAN Global Settings Product Reference Guide 131 UPC/EAN Global Settings This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN 8 symbologies, and affects all of these unless otherwise marked for each feature description. UPC/EAN Decoding Level Decoding Levels are used to configure a barcode symbology decoder to be very ag[...]
-
Pagina 140
Symbologies 132 PowerScan ® PD7100 Corded UPC/EAN Global Settings — cont. UPC/EAN Decoding Level — cont. ENTER/EXIT PROGRAMMING MODE UPC/EAN Decoding Lev el = 1 UPC/EAN Decoding Le vel = 2 UPC/EAN Decoding Lev el = 3 UPC/EAN Decoding Le vel = 4 UPC/EAN Decoding Lev el = 5 DEF A UL T[...]
-
Pagina 141
UPC/EAN Global Settings Product Reference Guide 133 UPC/EAN Global Settings — cont. UPC/EAN Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read labels that have damaged [...]
-
Pagina 142
Symbologies 134 PowerScan ® PD7100 Corded UPC/EAN Global Settings — cont. UPC/EAN Price Weight Check This feature enables/disables calculation and verification of price/weight check digits. Options are •D i s a b l e d • Enable 4-digit price-weight check-digit calculation • Enable 5-digit price-weight check-digit calculation • Enable E u[...]
-
Pagina 143
UPC/EAN Global Settings Product Reference Guide 135 UPC/EAN Global Settings — cont. UPC-A Minimum Reads This feature specifies the minimum number of consecutive times a UPC-A label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE UPC-A Minimum Reads = 1 UPC-A Minimum Reads = 2 UPC-A Minimum Reads = 3 UPC-A Minimum [...]
-
Pagina 144
Symbologies 136 PowerScan ® PD7100 Corded Add-Ons The following features apply to optional add-ons. Optional Add-ons The reader can be enabled to optionally read the following add-ons (supplementals): •P 2 •P 5 • GS1-128 NO TE Contact Customer Support for adv anced programming of optional and conditional add-ons. NO TE If a UPC/EAN base labe[...]
-
Pagina 145
Add-Ons Product Reference Guide 137 Add-Ons — cont. Optional Add-ons — cont. ENTER/EXIT PROGRAMMING MODE Optional Add-Ons = Enable P5 Optional Add-Ons = Disable GS1-128 Optional Add-Ons = Enable GS1-128 DEF A UL T[...]
-
Pagina 146
Symbologies 138 PowerScan ® PD7100 Corded Add-Ons — cont. Optional Add-On Timer This option sets the time the reader will look for an add-on when an add-on fragment has been seen and optional add-ons are enabled. (Also see Optional GS1-128 Add-On Timer on page 141 .) ENTER/EXIT PROGRAMMING MODE Optional Add-on Timer = 10ms Optional Add-on Timer [...]
-
Pagina 147
Add-Ons Product Reference Guide 139 Add-Ons — cont. Optional Add-On Timer — cont. ENTER/EXIT PROGRAMMING MODE Optional Add-on Timer = 60ms Optional Add-on Timer = 70ms Optional Add-on Timer = 100ms Optional Add-on Timer = 120ms Optional Add-on Timer = 140ms Optional Add-on Timer = 160ms DEF A UL T[...]
-
Pagina 148
Symbologies 140 PowerScan ® PD7100 Corded Add-Ons — cont. Optional Add-On Timer — cont. ENTER/EXIT PROGRAMMING MODE Optional Add-on Timer = 180ms Optional Add-on Timer = 200ms Optional Add-on Timer = 220ms Optional Add-on Timer = 240ms Optional Add-on Timer = 260ms Optional Add-on Timer = 280ms Optional Add-on Timer = 300ms[...]
-
Pagina 149
Add-Ons Product Reference Guide 141 Add-Ons — cont. Optional GS1-128 Add-On Timer This option sets the timer expiration value to read the added part after reading the linear EAN/UPC part. For UPC/EAN add-ons other than those of that type, see Optional Add-On Timer on page 138 . ENTER/EXIT PROGRAMMING MODE Optional GS1-128 Add-On Timer = Disable O[...]
-
Pagina 150
Symbologies 142 PowerScan ® PD7100 Corded Add-Ons — cont. Optional GS1-128 Add-On Timer — cont. ENTER/EXIT PROGRAMMING MODE Optional GS1-128 Add-On Timer = 60ms Optional GS1-128 Add-On Timer = 70ms Optional GS1-128 Add-On Timer = 100ms Optional GS1-128 Add-On Timer = 120ms Optional GS1-128 Add-On Timer = 140ms Optional GS1-128 Add-On Timer = 1[...]
-
Pagina 151
Add-Ons Product Reference Guide 143 Add-Ons — cont. Optional GS1-128 Add-On Timer — cont. ENTER/EXIT PROGRAMMING MODE Optional GS1-128 Add-On Timer = 180ms Optional GS1-128 Add-On Timer = 200ms Optional GS1-128 Add-On Timer = 220ms Optional GS1-128 Add-On Timer = 240ms Optional GS1-128 Add-On Timer = 260ms Optional GS1-128 Add-On Timer = 280ms [...]
-
Pagina 152
Symbologies 144 PowerScan ® PD7100 Corded Add-Ons — cont. P2 Add-Ons Minimum Reads This feature specifies the minimum number of times a P2 add-on must be read before it is marked as valid and then combined with a base labe l. ENTER/EXIT PROGRAMMING MODE P2 Add-Ons Minimum Reads = 1 P2 Add-Ons Minimum Reads = 2 P2 Add-Ons Minimum Reads = 3 P2 Add[...]
-
Pagina 153
Add-Ons Product Reference Guide 145 Add-Ons — cont. P5 Add-Ons Minimum Reads This feature specifies the minimum number of times a P5 add-on must be read before it is marked as valid and then combined with a base labe l. ENTER/EXIT PROGRAMMING MODE P5 Add-Ons Minim um Reads = 1 P5 Add-Ons Minimum Reads = 2 P5 Add-Ons Minim um Reads = 3 P5 Add-Ons [...]
-
Pagina 154
Symbologies 146 PowerScan ® PD7100 Corded Add-Ons — cont. GS1-128 Add-Ons Minimum Reads This feature specifies the minimum number of times an GS1-128 add-on must be read before it is marked as valid and then combined with a base labe l. ENTER/EXIT PROGRAMMING MODE GS1-128 Add-Ons Minimum Reads = 1 GS1-128 Add-Ons Minimum Reads = 2 GS1-128 Add-On[...]
-
Pagina 155
GS1 DataBar Omnidirectional Product Reference Guide 147 GS1 DataBar Omnidirectional The following options apply to the GS1 DataBar Omnidirectional (formerly RSS-14) symbology. GS1 DataBar Omnidirectional Enable/Disable When disabled, the reader will not read GS1 DataBar Omnidirectional barcodes. GS1 DataBar Omnidirectional GS1-128 Emulation When en[...]
-
Pagina 156
Symbologies 148 PowerScan ® PD7100 Corded GS1 DataBar Omnidirectional — cont. GS1 DataBar Omnidirectional Minimum Reads This feature specifies the minimum number of consecutive times a GS1 DataBar Omni- directional label must be decoded before it is accepted as good read . ENTER/EXIT PROGRAMMING MODE GS1 DataBar Omnidirectional Minimum Reads = 1[...]
-
Pagina 157
GS1 DataBar Expanded Product Reference Guide 149 GS1 DataBar Expanded The following options apply to the GS1 DataBar Expanded (formerly RSS Expanded) symbology. GS1 DataBar Expanded Enable/Disable When disabled, the reader will not read GS1 DataBar Expanded barcodes. GS1 DataBar Expanded GS1-128 Emulation When enabled, GS1 DataBar Expanded barcodes[...]
-
Pagina 158
Symbologies 150 PowerScan ® PD7100 Corded GS1 DataBar Expanded — cont. GS1 DataBar Expanded Minimum Reads This feature specifies the minimum number of consecutive times a GS1 DataBar Ex- panded label must be decoded before it is accepted as good read . ENTER/EXIT PROGRAMMING MODE GS1 DataBar Expanded Minimum Reads = 1 GS1 DataBar Expanded Minimu[...]
-
Pagina 159
GS1 DataBar Expanded Product Reference Guide 151 GS1 DataBar Expanded — cont. GS1 DataBar Expanded Length Control This feature specifies either variable length decoding or fixed length decoding for the GS1 DataBar Expanded symbology. Variable Length — For variable-length decoding, a minimum length may be set. Fixed Length — For fixed-length d[...]
-
Pagina 160
Symbologies 152 PowerScan ® PD7100 Corded GS1 DataBar Expanded — cont. GS1 DataBar Expanded Set Length 1 This feature specifies one of the barcode lengths for GS1 DataBar Expanded Lengt h Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s d[...]
-
Pagina 161
GS1 DataBar Expanded Product Reference Guide 153 GS1 DataBar Expanded — cont. GS1 DataBar Expanded Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select GS1 DataBar Expanded Set Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 01[...]
-
Pagina 162
Symbologies 154 PowerScan ® PD7100 Corded GS1 DataBar Expanded — cont. GS1 DataBar Expanded Set Length 2 This feature specifies one of the barcode lengths for GS1 DataBar Expanded Lengt h Control . Length 2 is the maximum label length if in Variable Length Mode, or the sec- ond fixed length if in Fixed Length Mode. Length includes the barcode’[...]
-
Pagina 163
GS1 DataBar Expanded Product Reference Guide 155 GS1 DataBar Expanded — cont. GS1 DataBar Expanded Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select GS1 DataBar Expanded Set Length 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 74[...]
-
Pagina 164
Symbologies 156 PowerScan ® PD7100 Corded GS1 DataBar Limited The following options apply to the GS1 DataBar Limited (formerly RSS Limited) sym- bology. GS1 DataBar Limited Enable/Disable When disabled, the reader will not read GS1 DataBar Limited barcodes. GS1 DataBar Limited GS1-128 Emulation When enabled, GS1 DataBar Limited barcodes will be tr[...]
-
Pagina 165
GS1 DataBar Limited Product Reference Guide 157 GS1 DataBar Limited — cont. GS1 DataBar Limited Minimum Reads This feature specifies the minimum number of consecutive times a GS1 DataBar Limited label must be decoded before it is accepted as good read . ENTER/EXIT PROGRAMMING MODE GS1 DataBar Limited Minimum Reads = 1 GS1 DataBar Limited Minimum [...]
-
Pagina 166
Symbologies 158 PowerScan ® PD7100 Corded Code 39 The following options apply to the Code 39 symbology. Code 39 Enable/Disable When disabled, the reader will not read Code 39 barcodes. ENTER/EXIT PROGRAMMING MODE Code 39 = Disable Code 39 = Enable DEF A UL T[...]
-
Pagina 167
Code 39 Product Reference Guide 159 Code 39 — cont. Code 39 Check Character Calculation Enable this option to enables/disables calculation and verification of an optional Code 39 check character. When disabled, any check character in the label is treated as a data character ENTER/EXIT PROGRAMMING MODE Code 39 Check Char acter Calculation = Don’[...]
-
Pagina 168
Symbologies 160 PowerScan ® PD7100 Corded Code 39 — cont. Code 39 Check Character Transmission Enable this option to transmit the check character along with Code 39 barcode data. Code 39 Start/Stop Character Transmission Enable this option to enable/disable transmission of Code 39 start and stop characters. ENTER/EXIT PROGRAMMING MODE Code 39 Ch[...]
-
Pagina 169
Code 39 Product Reference Guide 161 Code 39 — cont. Code 39 Full ASCII In Code 39 decoding, this enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters. ENTER/EXIT PROGRAMMING MODE Code 39 Full ASCII = Disable Code 39 Full ASCII = Enable DEF A UL T[...]
-
Pagina 170
Symbologies 162 PowerScan ® PD7100 Corded Code 39 — cont. Code 39 Quiet Zones This feature specifies the number of quiet zones for Code 39 labels. Quiet zones are blank areas at the ends of a barcode and are typically 10 times the width of the narrowest bar or space in the label. ENTER/EXIT PROGRAMMING MODE Code 39 Quiet Zones = Quiet Zone on on[...]
-
Pagina 171
Code 39 Product Reference Guide 163 Code 39 — cont. Code 39 Minimum Reads This feature specifies the minimum number of consecutive times a Code 39 label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE Code 39 Minimum Reads = 1 Code 39 Minimum Reads = 2 Code 39 Minimum Reads = 3 Code 39 Minimum Reads = 4 DEF A UL T[...]
-
Pagina 172
Symbologies 164 PowerScan ® PD7100 Corded Code 39 — cont. Code 39 Decoding Level Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs. • Choosing Level 1 results in a very conser vative decoder at the expense of not being able to read poorly pr[...]
-
Pagina 173
Code 39 Product Reference Guide 165 Code 39 — cont. Code 39 Decoding Level — cont. ENTER/EXIT PROGRAMMING MODE Code 39 Decoding Lev el = 1 Code 39 Decoding Le vel = 2 Code 39 Decoding Lev el = 3 Code 39 Decoding Le vel = 4 Code 39 Decoding Lev el = 5 DEF A UL T[...]
-
Pagina 174
Symbologies 166 PowerScan ® PD7100 Corded Code 39 — cont. Code 39 Length Control This feature specifies either variable length decoding or fixed length decoding for the Code 39 symbology. Variable Length — For variable length decoding, a minimum and maximum length may be set. Fixed Length — For fixed length decoding, two different lengths ma[...]
-
Pagina 175
Code 39 Product Reference Guide 167 Code 39 — cont. Code 39 Set Length 1 This feature specifies one of the barcode lengths for Code 39 Length Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s data characters only. The length can be set from[...]
-
Pagina 176
Symbologies 168 PowerScan ® PD7100 Corded Code 39 — cont. Code 39 Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select Code 39 Set Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 02 = Length 1 is 2 Characters[...]
-
Pagina 177
Code 39 Product Reference Guide 169 Code 39 — cont. Code 39 Set Length 2 This feature specifies one of the barcode lengths for Code 39 Length Control . Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. Length includes the barcode’s check, data, and full-ASCII shift characters. T[...]
-
Pagina 178
Symbologies 170 PowerScan ® PD7100 Corded Code 39 — cont. Code 39 Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select Code 39Length 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 50 = Length 2 is 50 Characters[...]
-
Pagina 179
Code 39 Product Reference Guide 171 Code 39 — cont. Code 39 Interdigit Ratio This feature specifies the ratio between an intercharacter space and module for Code 39 labels. ENTER/EXIT PROGRAMMING MODE Code 39 Interdigit Ratio = Disable Code 39 Interdigit Ratio = 1 Code 39 Interdigit Ratio = 2 Code 39 Interdigit Ratio = 3 Code 39 Interdigit Ratio [...]
-
Pagina 180
Symbologies 172 PowerScan ® PD7100 Corded Code 39 — cont. Code 39 Interdigit Ratio — cont. ENTER/EXIT PROGRAMMING MODE Code 39 Interdigit Ratio = 6 Code 39 Interdigit Ratio = 7 Code 39 Interdigit Ratio = 8 Code 39 Interdigit Ratio = 9 Code 39 Interdigit Ratio = 10[...]
-
Pagina 181
Code 39 Product Reference Guide 173 Code 39 — cont. Code 39 Character Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read labels that have damaged areas. Enabling correl[...]
-
Pagina 182
Symbologies 174 PowerScan ® PD7100 Corded Code 39 Stitching This option enables/disables stitching for Code 39 labels. When parts of a Code 39 bar- code are presented to the reader with this feature enabled, the barcode parts will be as- sembled by the reader’s software, and the data will be decoded if all barcode proofing requirements are met. [...]
-
Pagina 183
Code 32 Product Reference Guide 175 Code 32 The following options apply to the Code 32 (Italian Pharamaceutical Code) symbology. Code 32 Enable/Disable When disabled, the reader will not read Code 32 barcodes. Code 32 Feature Setting Exceptions ENTER/EXIT PROGRAMMING MODE Code 32 = Disable Code 32 = Enable DEF A UL T NO TE The follo wing features a[...]
-
Pagina 184
Symbologies 176 PowerScan ® PD7100 Corded Code 32 — cont. Code 32 Check Character Transmission Enable this option to transmit the check character along with Code 32 barcode data. Code 32 Start/Stop Character Transmission This option enables/disable transmission of Code 32 start and stop characters. ENTER/EXIT PROGRAMMING MODE Code 32 Check Char [...]
-
Pagina 185
Code 128 Product Reference Guide 177 Code 128 The following options apply to the Code 128 symbology. Code 128 Enable/Disable When disabled, the reader will not read Code 128 barcodes. Expand Code 128 to Code 39 This feature enables/disables expansion of Code 128 labels to Code 39 labels. ENTER/EXIT PROGRAMMING MODE Code 128 = Disable Code 128 = Ena[...]
-
Pagina 186
Symbologies 178 PowerScan ® PD7100 Corded Code 128 — cont. Code 128 Check Character Transmission Enable this option to transmit the check character along with Code 128 barcode data. Code 128 Function Character Transmission Enables/disables transmission of Code128 function characters 1, 2, 3, and 4. ENTER/EXIT PROGRAMMING MODE Code 128 Check Char[...]
-
Pagina 187
Code 128 Product Reference Guide 179 Code 128 — cont. Code 128 Sub-Code Change Transmission Enables/disables the transmission of “Sub-Code exchange” characters (NOT transmitted by standard decoding). ENTER/EXIT PROGRAMMING MODE Code 128 Sub-Code Change T ransmission = Disable Code 128 Sub-Code Change T ransmission = Enable DEF A UL T[...]
-
Pagina 188
Symbologies 180 PowerScan ® PD7100 Corded Code 128 — cont. Code 128 Quiet Zones This feature specifies the number of quiet zones for Code 128 labels. Quiet zones are blank areas at the ends of a barcode and are typically 10 times the width of the narrowest bar or space in the label. ENTER/EXIT PROGRAMMING MODE Code 128 Quiet Zones = No Quiet Zon[...]
-
Pagina 189
Code 128 Product Reference Guide 181 Code 128 — cont. Code 128 Minimum Reads This feature specifies the minimum number of consecutive times a Code 128 label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE Code 128 Minimum Reads = 1 Code 128 Minimum Reads = 2 Code 128 Minimum Reads = 3 Code 128 Minimum Reads = 4 DE[...]
-
Pagina 190
Symbologies 182 PowerScan ® PD7100 Corded Code 128 — cont. Code 128 Decoding Level Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs. • Choosing Level 1 results in a very conser vative decoder at the expense of not being able to read poorly [...]
-
Pagina 191
Code 128 Product Reference Guide 183 Code 128 — cont. Code 128 Decoding Level — cont. ENTER/EXIT PROGRAMMING MODE Code 128 Decoding Lev el = 1 Code 128 Decoding Le vel = 2 Code 128 Decoding Lev el = 3 Code 128 Decoding Le vel = 4 Code 128 Decoding Lev el = 5 DEF A UL T[...]
-
Pagina 192
Symbologies 184 PowerScan ® PD7100 Corded Code 128 — cont. Code 128 Length Control This feature specifies either variable length decoding or fixed length decoding for the Code 128 symbology. Variable Length — For variable length decoding, a minimum and maximum length may be set. Fixed Length — For fixed length decoding, two different lengths[...]
-
Pagina 193
Code 128 Product Reference Guide 185 Code 128 — cont. Code 128 Set Length 1 This feature specifies one of the barcode lengths for Code 128 Length Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s data characters only. The length can be set [...]
-
Pagina 194
Symbologies 186 PowerScan ® PD7100 Corded Code 128 — cont. Code 128 Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select Code 128 Set Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 01 = Length 1 is 1 Character[...]
-
Pagina 195
Code 128 Product Reference Guide 187 Code 128 — cont. Code 128 Set Length 2 This feature specifies one of the barcode lengths for Code 128 Length Control . Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. Length includes the barcode’s data characters only. The length can be set[...]
-
Pagina 196
Symbologies 188 PowerScan ® PD7100 Corded Code 128 — cont. Code 128 Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select Code 128 Length 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 80 = Length 2 is 80 Characters[...]
-
Pagina 197
Code 128 Product Reference Guide 189 Code 128 — cont. Code 128 Character Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read labels that have damaged areas. Enabling cor[...]
-
Pagina 198
Symbologies 190 PowerScan ® PD7100 Corded Code 128 — cont. Code 128 Stitching This option enables/disables stitching for Code 128 labels. When parts of a Code 128 barcode are presented to the reader with this feature enabled, the barcode parts will be assembled by the reader’s software, and the data will be decoded if all barcode proofing requ[...]
-
Pagina 199
GS1-128 Product Reference Guide 191 GS1-128 The following options apply to the GS1-128 symbology. (Also known as USS-128, GTIN-128, UCC-128, EAN 128.) GS1-128 Enable This option enables/disables the ability of the reader to translate GS1-128 labels to the GS1-128 data format. Options are: • T ransmit GS1-128 labels in Code 128 data format. • T [...]
-
Pagina 200
Symbologies 192 PowerScan ® PD7100 Corded Interleaved 2 of 5 (I 2 of 5) The following options apply to the I 2 of 5 symbology. I 2 of 5 Enable/Disable When disabled, the reader will not read I 2 of 5 barcodes. ENTER/EXIT PROGRAMMING MODE I 2 of 5 = Disable I 2 of 5 = Enable DEF A UL T[...]
-
Pagina 201
Interleaved 2 of 5 (I 2 of 5) Product Reference Guide 193 Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Check Character Calculation This option enables/disables calculation and verification of an optional I 2 of 5 check character . ENTER/EXIT PROGRAMMING MODE I 2 of 5 Check Character Calculation = Disab le I 2 of 5 Check Character Calculation = [...]
-
Pagina 202
Symbologies 194 PowerScan ® PD7100 Corded Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Check Character Transmission Enable this option to transmit the check character along with I 2 of 5 barcode data. ENTER/EXIT PROGRAMMING MODE I 2 of 5 Check Character T ransmission = Don’t Send I 2 of 5 Check Character T ransmission = Send DEF A UL T[...]
-
Pagina 203
Interleaved 2 of 5 (I 2 of 5) Product Reference Guide 195 Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Minimum Reads This feature specifies the minimum number of consecutive times an I 2 of 5 label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE I 2 of 5 Minimum Reads = 1 I 2 of 5 Minimum Reads = 2 I 2 of 5 Mini[...]
-
Pagina 204
Symbologies 196 PowerScan ® PD7100 Corded Interleaved 2 of 5 (I 2 of 5) — cont. 2 of 5 Decoding Level Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs. • Choosing Level 1 results in a very conser vative decoder at the expense of not being a[...]
-
Pagina 205
Interleaved 2 of 5 (I 2 of 5) Product Reference Guide 197 Interleaved 2 of 5 (I 2 of 5) — cont. 2 of 5 Decoding Level — cont. ENTER/EXIT PROGRAMMING MODE 2 of 5 Decoding Le vel = 1 2 of 5 Decoding Lev el = 2 2 of 5 Decoding Le vel = 3 2 of 5 Decoding Lev el = 4 2 of 5 Decoding Le vel = 5 DEF A UL T[...]
-
Pagina 206
Symbologies 198 PowerScan ® PD7100 Corded Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Length Control This feature specifies either variable length decoding or fixed length decoding for the I 2 of 5 symbology. Variable Length — For variable length decoding, a minimum and maximum length may be set. Fixed Length — For fixed length decoding, [...]
-
Pagina 207
Interleaved 2 of 5 (I 2 of 5) Product Reference Guide 199 Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Set Length 1 This feature specifies one of the barcode lengths for I 2 of 5 Length Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. The length includes the barcode’[...]
-
Pagina 208
Symbologies 200 PowerScan ® PD7100 Corded Interleaved 2 of 5 (I 2 of 5) — cont. Datalogic 2 of 5 Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select I 2 of 5 Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 06 = Length 1 is 6 [...]
-
Pagina 209
Interleaved 2 of 5 (I 2 of 5) Product Reference Guide 201 Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Set Length 2 This feature specifies one of the barcode lengths for I 2 of 5 Length Control . Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. The length includes the barcode?[...]
-
Pagina 210
Symbologies 202 PowerScan ® PD7100 Corded Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select I 2 of 5 Length 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 50 = Length 2 is 50 Charact[...]
-
Pagina 211
Interleaved 2 of 5 (I 2 of 5) Product Reference Guide 203 Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Character Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read la[...]
-
Pagina 212
Symbologies 204 PowerScan ® PD7100 Corded Interleaved 2 of 5 (I 2 of 5) — cont. I 2 of 5 Stitching This option enables/disables stitching for I 2 of 5 labels. When parts of a I 2 of 5 barcode are presented to the reader with this feature enabled, the barcode parts will be assembled by the reader’s software, and the data will be decoded if all [...]
-
Pagina 213
Datalogic 2 of 5 Product Reference Guide 205 Datalogic 2 of 5 The following options apply to the Datalogic 2 of 5 symbology. Datalogic 2 of 5 Enable/Disable When disabled, the reader will not read Datalogic 2 of 5 barcodes. ENTER/EXIT PROGRAMMING MODE Datalogic 2 of 5 = Disable Datalogic 2 of 5 = Enable DEF A UL T[...]
-
Pagina 214
Symbologies 206 PowerScan ® PD7100 Corded Datalogic 2 of 5 — cont. Datalogic 2 of 5 Check Character Calculation This option enables/disables calculation and verification of an optional Datalogic 2 of 5 check character. ENTER/EXIT PROGRAMMING MODE Datalogic 2 of 5 Check Char acter Calculation = Disable Datalogic 2 of 5 Check Char acter Calculatio[...]
-
Pagina 215
Datalogic 2 of 5 Product Reference Guide 207 Datalogic 2 of 5 — cont. Datalogic 2 of 5 Minimum Reads This feature specifies the minimum number of consecutive times an Datalogic 2 of 5 la- bel must be decoded before it is accepted as good read. Datalogic 2 of 5 Decoding Level ENTER/EXIT PROGRAMMING MODE I 2 of 5 Minimum Reads = 1 I 2 of 5 Minimum [...]
-
Pagina 216
Symbologies 208 PowerScan ® PD7100 Corded Datalogic 2 of 5 — cont. Datalogic 2 of 5 Length Control This feature specifies either variable length decoding or fixed length decoding for the Datalogic 2 of 5 symbology. Variable Length — For variable length decoding, a minimum and maximum length may be set. Fixed Length — For fixed length decodin[...]
-
Pagina 217
Datalogic 2 of 5 Product Reference Guide 209 Datalogic 2 of 5 — cont. Datalogic 2 of 5 Set Length 1 This feature specifies one of the barcode lengths for Datalogic 2 of 5 Length Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. The length includes the barcode’s check an[...]
-
Pagina 218
Symbologies 210 PowerScan ® PD7100 Corded Datalogic 2 of 5 — cont. Datalogic 2 of 5 Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select Datalogic 2 of 5 Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 06 = Length 1 is 6 Chara[...]
-
Pagina 219
Datalogic 2 of 5 Product Reference Guide 211 Datalogic 2 of 5 — cont. Datalogic 2 of 5 Set Length 2 This feature specifies one of the barcode lengths for Datalogic 2 of 5 Length Control . Length 2 is the maximum label le ngth if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. The length includes the barcode’s check [...]
-
Pagina 220
Symbologies 212 PowerScan ® PD7100 Corded Datalogic 2 of 5 — cont. Datalogic 2 of 5 Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select Datalogic 2 of 5 Length 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 50 = Length 2 is 50 Char[...]
-
Pagina 221
Datalogic 2 of 5 Product Reference Guide 213 Datalogic 2 of 5 — cont. Datalogic 2 of 5 Interdigit Maximum Ratio This feature specifies the maximum ratio between intercharacter space and module for Datalogic 2 of 5. ENTER/EXIT PROGRAMMING MODE Datalogic 2 of 5 Interdigit Maximum Ratio = Disab le Datalogic 2 of 5 Interdigit Maximum Ratio = 1 Datalo[...]
-
Pagina 222
Symbologies 214 PowerScan ® PD7100 Corded Datalogic 2 of 5 Interdigit Maximum Ratio — cont. Datalogic 2 of 5 Interdigit Maximum Ratio = 6 Datalogic 2 of 5 Interdigit Maximum Ratio = 7 Datalogic 2 of 5 Interdigit Maximum Ratio = 8 Datalogic 2 of 5 Interdigit Maximum Ratio = 9 Datalogic 2 of 5 Interdigit Maximum Ratio = 10[...]
-
Pagina 223
Datalogic 2 of 5 Product Reference Guide 215 Datalogic 2 of 5 — cont. Datalogic 2 of 5 Character Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read labels that have dam[...]
-
Pagina 224
Symbologies 216 PowerScan ® PD7100 Corded Datalogic 2 of 5 — cont. Datalogic 2 of 5 Stitching This option enables/disables stitching for Datalogic 2 of 5 labels. When parts of a Data- logic 2 of 5 barcode are presented to the reader with this feature enabled, the barcode parts will be assembled by the reader’s software, and the data will be de[...]
-
Pagina 225
Codabar Product Reference Guide 217 Codabar The following options apply to the Codabar symbology. Codabar Enable/Disable When disabled, the reader will not read Codabar barcodes. ENTER/EXIT PROGRAMMING MODE Codabar = Disable Codabar = Enable DEF A UL T[...]
-
Pagina 226
Symbologies 218 PowerScan ® PD7100 Corded Codabar — cont. Codabar Check Character Calculation Enable this option to enables/disables calculation and verification of an optional Codabar check character. When disabled, any check character in the label is treated as a data character ENTER/EXIT PROGRAMMING MODE Codabar Check Character Calc ulation =[...]
-
Pagina 227
Codabar Product Reference Guide 219 Codabar — cont. Codabar Check Character Transmission Enable this option to transmit the check character along with Codabar barcode data. Codabar Start/Stop Character Transmission Enable this option to enable/disable transmission of Codabar start and stop characters. ENTER/EXIT PROGRAMMING MODE Codabar Check Cha[...]
-
Pagina 228
Symbologies 220 PowerScan ® PD7100 Corded Codabar — cont. Codabar Start/Stop Character Set This option specifies the format of transmitted Codabar start/stop characters . ENTER/EXIT PROGRAMMING MODE Codabar Check Character Set = ABCD/TN*E Codabar Check Character Set = ABCD/ABCD Codabar Check Character Set = abcd/t n*e Codabar Check Character Set[...]
-
Pagina 229
Codabar Product Reference Guide 221 Codabar — cont. Codabar Start/Stop Character Match When enabled, this option requires that start and stop characters match. ENTER/EXIT PROGRAMMING MODE Codabar Star t/Stop Character Match = Don’t Require Match Codabar Star t/Stop Character Match = Require Match DEF A UL T[...]
-
Pagina 230
Symbologies 222 PowerScan ® PD7100 Corded Codabar — cont. Codabar Quiet Zones This feature specifies the number of quiet zones for Codabar labels. Quiet zones are blank areas at the ends of a barcode and are typically 10 times the width of the narrowest bar or space in the label. ENTER/EXIT PROGRAMMING MODE Codabar Quiet Zones = Quiet Zone on on[...]
-
Pagina 231
Codabar Product Reference Guide 223 Codabar — cont. Codabar Minimum Reads This feature specifies the minimum number of consecutive times a Codabar label must be decoded before it is accepted as good read. ENTER/EXIT PROGRAMMING MODE Codabar Minimum Reads = 1 Codabar Minimum Reads = 2 Codabar Minimum Reads = 3 Codabar Minimum Reads = 4 DEF A UL T[...]
-
Pagina 232
Symbologies 224 PowerScan ® PD7100 Corded Codabar — cont. Codabar Decoding Level Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs. • Choosing Level 1 results in a very conser vative decoder at the expense of not being able to read poorly pr[...]
-
Pagina 233
Codabar Product Reference Guide 225 Codabar — cont. Codabar Decoding Level — cont. ENTER/EXIT PROGRAMMING MODE Codabar Decoding Lev el = 1 Codabar Decoding Lev el = 2 Codabar Decoding Lev el = 3 Codabar Decoding Lev el = 4 Codabar Decoding Lev el = 5 DEF A UL T[...]
-
Pagina 234
Symbologies 226 PowerScan ® PD7100 Corded Codabar — cont. Codabar Length Control This feature specifies either variable length decoding or fixed length decoding for the Codabar symbology. Variable Length — For variable length decoding, a minimum and maximum length may be set. Fixed Length — For fixed length decoding, two different lengths ma[...]
-
Pagina 235
Codabar Product Reference Guide 227 Codabar — cont. Codabar Set Length 1 This feature specifies one of the barcode lengths for Codabar Length Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s start, stop, check and data characters. The leng[...]
-
Pagina 236
Symbologies 228 PowerScan ® PD7100 Corded Codabar — cont. Codabar Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select Codabar Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 03 = Length 1 is 3 Characters[...]
-
Pagina 237
Codabar Product Reference Guide 229 Codabar — cont. Codabar Set Length 2 This feature specifies one of the barcode lengths for Codabar Length Control . Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. The length includes the barcode’s start, stop, check and data characters. The[...]
-
Pagina 238
Symbologies 230 PowerScan ® PD7100 Corded Codabar — cont. Codabar Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select CodabarLength 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 50 = Length 2 is 50 Characters[...]
-
Pagina 239
Codabar Product Reference Guide 231 Codabar — cont. Codabar Interdigit Ratio This feature specifies the ratio between an intercharacter space and module for Codabar labels. ENTER/EXIT PROGRAMMING MODE Codabar Interdigit Ratio = Disable Codabar Interdigit Ratio = 1 Codabar Interdigit Ratio = 2 Codabar Interdigit Ratio = 3 Codabar Interdigit Ratio [...]
-
Pagina 240
Symbologies 232 PowerScan ® PD7100 Corded Codabar — cont. Codabar Interdigit Ratio — cont. ENTER/EXIT PROGRAMMING MODE Codabar Interdigit Ratio = 6 Codabar Interdigit Ratio = 7 Codabar Interdigit Ratio = 8 Codabar Interdigit Ratio = 9 Codabar Interdigit Ratio = 10[...]
-
Pagina 241
Codabar Product Reference Guide 233 Codabar — cont. Codabar Character Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read labels that have damaged areas. Enabling correl[...]
-
Pagina 242
Symbologies 234 PowerScan ® PD7100 Corded Codabar Stitching This option enables/disables stitching for Codabar labels. When parts of a Codabar bar- code are presented to the reader with this feature enabled, the barcode parts will be as- sembled by the reader’s software, and the data will be decoded if all barcode proofing requirements are met. [...]
-
Pagina 243
Code 11 Product Reference Guide 235 Code 11 The following options apply to the Code 11 symbology. Code 11 Enable/Disable When disabled, the reader will not read Code 11 barcodes. ENTER/EXIT PROGRAMMING MODE Code 11 = Disable Code 11 = Enable DEF A UL T[...]
-
Pagina 244
Symbologies 236 PowerScan ® PD7100 Corded Code 11 — cont. Code 11 Check Character Calculation This option enables/disables calculation and verification of optional Code 11 check char- acter. ENTER/EXIT PROGRAMMING MODE Code 11 Check Char acter Calculation = Disable Code 11 Check Char acter Calculation = Check C Code 11 Check Character Calculatio[...]
-
Pagina 245
Code 11 Product Reference Guide 237 Code 11 — cont. Code 11 Check Character Transmission This feature enables/disables transmission of an optional Code 11 check character. ENTER/EXIT PROGRAMMING MODE Code 11 Check Character T ransmission = Don’t Send Code 11 Check Char acter T ransmission = Send DEF A UL T[...]
-
Pagina 246
Symbologies 238 PowerScan ® PD7100 Corded Code 11 — cont. Code 11 Minimum Reads This feature specifies the minimum number of consecutive times a Code 93 label must be decoded before it is accepted as good read.. ENTER/EXIT PROGRAMMING MODE Code 11 Minimum Reads = 1 Code 11 Minimum Reads = 2 Code 11 Minimum Reads = 3 Code 11 Minimum Reads = 4 DEF[...]
-
Pagina 247
Code 11 Product Reference Guide 239 Code 11 — cont. Code 11 Length Control This feature specifies either variable length decoding or fixed length decoding for the Code 11 symbology. Variable Length — For variable length decoding, a minimum and maximum length may be set. Fixed Length — For fixed length decoding, two different lengths may be se[...]
-
Pagina 248
Symbologies 240 PowerScan ® PD7100 Corded Code 11 — cont. Code 11 Set Length 1 This feature specifies one of the barcode lengths for Code 11 Length Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s check and data characters. The length can[...]
-
Pagina 249
Code 11 Product Reference Guide 241 Code 11 — cont. Code 11 Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select Code 11 Set Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 04 = Length 1 is 4 Characters[...]
-
Pagina 250
Symbologies 242 PowerScan ® PD7100 Corded Code 11 — cont. Code 11 Set Length 2 This feature specifies one of the barcode lengths for Code 11 Length Control . Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. Length includes the barcode’s check and data characters. The length ca[...]
-
Pagina 251
Code 11 Product Reference Guide 243 Code 11 — cont. Code 11 Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select Code 11 Length 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 50 = Length 2 is 50 Characters[...]
-
Pagina 252
Symbologies 244 PowerScan ® PD7100 Corded Code 11 — cont. Code 11 Interdigit Ratio This feature specifies the ratio between an intercharacter space and module for Code 11 labels. ENTER/EXIT PROGRAMMING MODE Code 11 Interdigit Ratio = Disable Code 11 Interdigit Ratio = 1 Code 11 Interdigit Ratio = 2 Code11 Interdigit Ratio = 3 Code 11 Interdigit [...]
-
Pagina 253
Code 11 Product Reference Guide 245 Code 11 — cont. Code 11 Interdigit Ratio — cont. ENTER/EXIT PROGRAMMING MODE Code 11 Interdigit Ratio = 6 Code 11 Interdigit Ratio = 7 Code 11 Interdigit Ratio = 8 Code 11 Interdigit Ratio = 9 Code 11 Interdigit Ratio = 10[...]
-
Pagina 254
Symbologies 246 PowerScan ® PD7100 Corded Code 11 Decoding Level Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs. • Choosing Level 1 results in a very conser vative decoder at the expense of not being able to read poorly printed or damaged l[...]
-
Pagina 255
Code 11 Product Reference Guide 247 Code 11 — cont. Code 11 Decoding Level — cont. ENTER/EXIT PROGRAMMING MODE Codabar Decoding Lev el = 1 Codabar Decoding Lev el = 2 Codabar Decoding Lev el = 3 Codabar Decoding Lev el = 4 Codabar Decoding Lev el = 5 DEF A UL T[...]
-
Pagina 256
Symbologies 248 PowerScan ® PD7100 Corded Code 11 — cont. Code 11 Character Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read labels that have damaged areas. Enabling[...]
-
Pagina 257
Code 11 Product Reference Guide 249 Code 11 Stitching This option enables/disables stitching for Code 11 labels. When parts of a Code 11 bar- code are presented to the reader with this feature enabled, the barcode parts will be as- sembled by the reader’s software, and the data will be decoded if all barcode proofing requirements are met. ENTER/E[...]
-
Pagina 258
Symbologies 250 PowerScan ® PD7100 Corded Standard 2 of 5 The following options apply to the Standard 2 of 5 symbology. Standard 2 of 5 Enable/Disable When disabled, the reader will not read Standard 2 of 5 barcodes. ENTER/EXIT PROGRAMMING MODE Standard 2 of 5 = Disable Standard 2 of 5 = Enable DEF A UL T[...]
-
Pagina 259
Standard 2 of 5 Product Reference Guide 251 Standard 2 of 5 — cont. Standard 2 of 5 Check Character Calculation This option enables/disables calculation and verification of an optional Standard 2 of 5 check character. Standard 2 of 5 Check Character Transmission This feature enables/disables transmission of an optional Standard 2 of 5 check chara[...]
-
Pagina 260
Symbologies 252 PowerScan ® PD7100 Corded Standard 2 of 5 — cont. Standard 2 of 5 Minimum Reads This feature specifies the minimum number of consecutive times a Standard 2 of 5 label must be decoded before it is accepted as good read. Standard 2 of 5 Decoding Level ENTER/EXIT PROGRAMMING MODE Standard 2 of 5 Minimum Reads = 1 Standard 2 of 5 Min[...]
-
Pagina 261
Standard 2 of 5 Product Reference Guide 253 Standard 2 of 5 — cont. Standard 2 of 5 Length Control This feature specifies either variable length decoding or fixed length decoding for the Standard 2 of 5 symbology. Variable Length — For variable length decoding, a minimum and maximum length may be set. Fixed Length — For fixed length decoding,[...]
-
Pagina 262
Symbologies 254 PowerScan ® PD7100 Corded Standard 2 of 5 — cont. Standard 2 of 5 Set Length 1 This feature specifies one of the barcode lengths for Standard 2 of 5 Length Control . Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s check and data ch[...]
-
Pagina 263
Standard 2 of 5 Product Reference Guide 255 Standard 2 of 5 — cont. Standard 2 of 5 Set Length 1 — cont. ENTER/EXIT PROGRAMMING MODE Select Standard 2 of 5 Length 1 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 08 = Length 1 is 8 Charact[...]
-
Pagina 264
Symbologies 256 PowerScan ® PD7100 Corded Standard 2 of 5 — cont. Standard 2 of 5 Set Length 2 This feature specifies one of the barcode lengths for Standard 2 of 5 Length Control . Length 2 is the maximum labe l length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode. Length includes the barcode’s check and data [...]
-
Pagina 265
Standard 2 of 5 Product Reference Guide 257 Standard 2 of 5 — cont. Standard 2 of 5 Set Length 2 — cont. ENTER/EXIT PROGRAMMING MODE Select Standard 2 of 5 Length 2 Setting Make a mistak e? Scan the CANCEL barcode to abor t and not sav e the entr y string. Y ou can then star t again at the beginning. CANCEL DEF A UL T 50 = Length 2 is 50 Charac[...]
-
Pagina 266
Symbologies 258 PowerScan ® PD7100 Corded Standard 2 of 5 — cont. Standard 2 of 5 Character Correlation When correlation is enabled, the barcode reader will combine label data from multiple scans when decoding. Enabling correlation will help the scanner read labels that have some spots and/or voids. It may also help read labels that have damaged[...]
-
Pagina 267
Standard 2 of 5 Product Reference Guide 259 Standard 2 of 5 Stitching This option enables/disables stitching for Standard 2 of 5 labels. When parts of a Stan- dard 2 of 5 barcode are presented to the reader with this feature enabled, the barcode parts will be assembled by the reader’s software, and the data will be decoded if all bar- code proofi[...]
-
Pagina 268
Symbologies 260 PowerScan ® PD7100 Corded ISBT 128 The following options apply to the ISBT 128 symbology. ISBT 128 Enable/Disable When disabled, the imager will not read ISBT barcodes. ISBT 128 Concatenation Use this option to enable/disable ISBT128 concatenation of 2 labels. ENTER/EXIT PROGRAMMING MODE ISBT 128 = Disable ISBT 128 = Enable DEF A U[...]
-
Pagina 269
ISBT 128 Product Reference Guide 261 ISBT 128 — cont. ISBT 128 Force Concatenation When enabled, this feature forces concatenation for ISBT. ISBT 128 Advanced Concatenation Options NO TE This option is only valid when ISBT 128 Concatenation is enabled. ( see page 260 ). ENTER/EXIT PROGRAMMING MODE ISBT 128 F orce Concatenation = Disable ISBT 128 [...]
-
Pagina 270
Symbologies 262 PowerScan ® PD7100 Corded Code 4 The following options apply to the Code 4 symbology. Code 4 Enable/Disable Enables/Disables ability of imager to decode Code 4 labels. ENTER/EXIT PROGRAMMING MODE Code 4 = Disable Code 4 = Enable DEF A UL T[...]
-
Pagina 271
Code 4 Product Reference Guide 263 Code 4 — cont. Code 4 Check Character Transmission This feature enables/disables transmission of an optional Code 4 check character. Code 4 Hex to Decimal Conversion This feature enables/disables the conversion of hexidecimal label data to decimal label da- ta. ENTER/EXIT PROGRAMMING MODE Code 4 Check Character [...]
-
Pagina 272
Symbologies 264 PowerScan ® PD7100 Corded Code 5 The following options apply to the Code 5 symbology. Code 5 Enable/Disable Enables/Disables ability of imager to decode Code 5 labels. ENTER/EXIT PROGRAMMING MODE Code 5 = Disable Code 5 = Enable DEF A UL T[...]
-
Pagina 273
Code 5 Product Reference Guide 265 Code 5 — cont. Code 5 Check Character Transmission This feature enables/disables transmission of an optional Code 5 check character. Code 5 Hex to Decimal Conversion This feature enables/disables the conversion of hexidecimal label data to decimal label da- ta. ENTER/EXIT PROGRAMMING MODE Code 5 Check Character [...]
-
Pagina 274
Symbologies 266 PowerScan ® PD7100 Corded Code 4 and Code 5 Common Configuration Items The following options apply to both Code 4 and Code 5 symbologies. Code 4 and 5 Decoding Level Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very conservative depending on a particular customer’s needs. • Choosing[...]
-
Pagina 275
Code 4 and Code 5 Common Configuration Items Product Reference Guide 267 Code 4 and Code 5 Common Configuration Items — cont. Code 4 and 5 Decoding Level — cont. ENTER/EXIT PROGRAMMING MODE Code 4 and Code 5 Decoding Lev el = 1 Code 4 and Code 5 Decoding Le vel = 2 Code 4 and Code 5 Decoding Lev el = 3 Code 4 and Code 5 Decoding Le vel = 4 Code[...]
-
Pagina 276
Symbologies 268 PowerScan ® PD7100 Corded Code 4 and Code 5 Common Configuration Items — cont. Code 4 and Code 5 Minimum Reads This feature specifies the minimum number of consecutive times a Code 4 or Code 5 label must be decoded before it is accepted as good read. ENTER/EXIT PROGRAMMING MODE Code 4 or Code 5 Minimum Reads = 1 Code 4 or Code 5 [...]
-
Pagina 277
Follett 2 of 5 Product Reference Guide 269 Follett 2 of 5 The following options apply to the Follett 2 of 5 symbology. Follett 2 of 5 Enable/Disable Enables/Disables ability of imager to decode Follett 2 of 5 labels. ENTER/EXIT PROGRAMMING MODE F ollett 2 of 5 = Disable Follett 2 of 5 = Enab le DEF A UL T[...]
-
Pagina 278
Symbologies 270 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 279
Product Reference Guide 271 Appendix A Technical Specifications Table 35 contains Physical and Performance Characteristics, User Environment and Regulatory information. Table 36 provides Standard Cable Pinouts. Table 35. Technical Specifications Item Description Physical Characteristics Color Ye l l o w / B l a c k Black/Blac k Dimensions Height 7.[...]
-
Pagina 280
272 PowerScan ® PD7100 Corded Minimum Element Width 3 mil Print Contrast Minimum 15% minimum reflectance Decode Capability UPC/EAN/JAN, P2 /P5 add-ons; Code 39; Italian Code 32; Code 128; Code 128 ISBT; Code 128 add-ons; I 2 of 5; Standard 2 of 5; Code 11; Codabar; GS1-128; Code 93; GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Exp[...]
-
Pagina 281
Standard Cable Pinouts Product Reference Guide 273 Standard Cable Pinouts Figure 7 and Table 36 provide standard pinout information for the Base Station’s in- terface cable. Figure 7. Standard Cable Pinouts The signal descriptions in Table 36 apply to the connector on the reader and are for ref- erence only. Table 36. Standard Cable Pinouts — R[...]
-
Pagina 282
274 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 283
Product Reference Guide 275 Appendix B Standard Defaults The most common configuration settings are listed in the “Default” column of Table 37 . The settings in this table are as applied to a standard RS-232 interface. See Table 38 for a listing of default exceptions to this list as appled to other interface types. Page references are also prov[...]
-
Pagina 284
276 PowerScan ® PD7100 Corded Laser P ointer Control Star t scanning imme- diately after trigger 42 Laser P ointer P eriod 500 ms 43 Green Spot Duration 300 ms 45 RS-232 Baud Rate 9600 47 Data Bits 8 Data Bits 49 Stop Bits 1 Stop Bit 50 Pa r i t y None 51 Handshakin g Control Disab le 52 RS-232/USB-COM Intercharacter Dela y No Delay 54 Beep On ASC[...]
-
Pagina 285
Product Reference Guide 277 USB K eyboard Speed 1 ms 85 USB-OEM USB-OEM De vice Usage Handheld Scanner 88 Data Editing Global Prefix/Suffix No Global Prefix Global Suffix = 0x0D (CR) 96 Global AIM ID Disable 98 GS1-128 AIM ID Disab le 100 Label ID Control Disable 105 Case Conv ersion Disab le 112 Character Con version No Char Conversion 112 Symbolo[...]
-
Pagina 286
278 PowerScan ® PD7100 Corded EAN 13 EAN 13 Enab le/Disable Enable 124 EAN 13 Check Char acter T ransmission Send 124 EAN-13 Flag 1 Character Tr a n s m i t 125 EAN-13 ISBN Conv ers ion Disab le 126 EAN 13 Minimum Reads 1 127 EAN 8 EAN 8 Enable/Disab le Enable 128 EAN 8 Check Character T ransmission Send 128 Expand EAN 8 to EAN 13 Disable 129 EAN [...]
-
Pagina 287
Product Reference Guide 279 GS1 DataBar Expanded GS1 DataBar Expanded Enable/ Disable Disab le 149 GS1 DataBar Expand ed GS1-128 Emula- tion Disab le 149 GS1 DataBar Expand ed Minimum Reads 1 150 GS1 DataBar Expanded Length Control Va r i a b l e 15 1 GS1 DataBar Expand ed Set Length 1 1 152 GS1 DataBar Expand ed Set Length 2 74 154 GS1 DataBar Lim[...]
-
Pagina 288
280 PowerScan ® PD7100 Corded Code 32 F eature Setting Exceptions 3 175 Code 32 Check Char acter T ransmission Don’t Send 176 Code 32 Star t/Stop Character T ransmis- sion Don’t T ransmit 176 Code 128 Code 128 Enable/Disab le Enable 177 Expand Code 128 to Code 39 Don’t Expand 177 Code 128 Check Character T ransmission Send 178 Code 128 Quiet[...]
-
Pagina 289
Product Reference Guide 281 Datalogic 2 of 5 Datalogic 2 of 5 Enab le/Disable Enable 205 Datalogic 2 of 5 Chec k Character Calcu- lation Disab le 206 Datalogic 2 of 5 Minimum Reads 1 207 Datalogic 2 of 5 Length Control Va r i a bl e 208 Datalogic 2 of 5 Set Length 1 12 209 Datalogic 2 of 5 Set Length 2 100 211 Datalogic 2 of 5 Interdigit Maximum Ra[...]
-
Pagina 290
282 PowerScan ® PD7100 Corded Code 11 Check Ch aracter Calculation Check C and K 236 Code 11 Check Char acter T ransmission Send 237 Code 11 Minimum Reads 1 238 Code 11 Length Control Va r i a bl e 239 Code 11 Set Length 1 4 240 Code 11 Set Length 2 50 242 Code 11 Interdigit Ratio 4 244 Code 11 Decoding Lev el 3 246 Code 11 Character Correlation D[...]
-
Pagina 291
Product Reference Guide 283 Code 4 Hex to Decimal Conv ersion E nable 263 Code 5 Code 5 Enable/Disab le Disab le 264 Code 5 Check Character T ransmission Send 265 Code 5 Hex to Decimal Conv ersion E nable 265 Code 4 and Code 5 Common Configuration Items Code 4 and 5 Decoding Le vel 3 266 Code 4 and Code 5 Minimum Reads 1 268 Follett 2 of 5 Fo llett[...]
-
Pagina 292
284 PowerScan ® PD7100 Corded Default Exceptions Table 37 lists standard default settings as applied to a standard RS-232 interface. Table 38 provides a listing of default exceptions to that list as applied to the other inter- face types. Table 38. Default Exceptions by Interface Type Par a me t e r Default Excption Interfaces: IBM 46XX P or t 5B,[...]
-
Pagina 293
Default Exceptions Product Reference Guide 285 EAN8/P2 Label ID Character(s) B EAN8/P5 Label ID Character(s) B EAN8/GS1-128 Label ID Character(s) B EAN13/P2 Label ID Character(s) A EAN13/P5 Label ID Character(s) A EAN13/GS1-128 Label ID Character(s) A GS1 DataBar 14 (Omnidirectional) Label ID Character(s) E GS1 DataBar Expanded Label ID Character(s[...]
-
Pagina 294
286 PowerScan ® PD7100 Corded UPCE/P5 Label ID Character(s) I EAN8/P2 Label ID Character(s) J EAN8/P5 Label ID Character(s) K EAN8/GS1-128 Label ID Character(s) * EAN13/P2 Label ID Character(s) L EAN13/P5 Label ID Character(s) M EAN13/GS1-128 Label ID Character(s) # GS1 DataBar 14 (Omnidirectional) Label ID Character(s) u GS1 DataBar Expanded Labe[...]
-
Pagina 295
Product Reference Guide 287 Appendix C LED and Beeper Indications The reader ’ s beeper sounds and its LED illuminates to indicate various functions or errors on the reader . An optional “G reen Spot ” also performs useful functions. The tables below list these indications. One ex ception to the behaviors listed in the tables is that the read[...]
-
Pagina 296
288 PowerScan ® PD7100 Corded LED and Beeper Indications INDICA TION DESCRIPTION LED BEEPER P ower-up Beep The reader is in the process of pow- ering-up. Reader beeps four time s at highest frequency and v olume upon power- up . Good Read Beep A label has been successfully scanned by the reade r. LED behavior f or this indica- tion is configurab l[...]
-
Pagina 297
Error Codes Product Reference Guide 289 Error Codes U pon startup, if the reader sounds a long tone, this means the r eader has not passed its automatic Selftest and has enter ed FRU 1 isolation mode. If the r eader is reset, the sequence will be repeated. The following table describes the LED flashes/beep codes associated with an error found. 1. F[...]
-
Pagina 298
290 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 299
Product Reference Guide 291 Appendix D Sample Barcodes The sample barcodes in this appendix are typical representations for their symbology types. UPC-A EAN-13 Code 39 Code 128 Interleaved 2 of 5 0 1 2 3 4 5 6 7 8 9 0 5 3 4 5 6 7 8 9 0 1 2 3 4 0 123ABC 12345678901234567890123456789012345678901234 12345678901231[...]
-
Pagina 300
292 PowerScan ® PD7100 Corded Sample Barcodes — continued Code 32 Codabar Code 93 Code 11[...]
-
Pagina 301
GS1 DataBar (RSS) Product Reference Guide 293 GS1 DataBar (RSS) GS1 DataBar-14 NO TE GS1 DataBar variants m ust be enabled to read the barcodes belo w (see GS1 DataBar (RSS) on page 293 ). 10293847560192837 465019283746029478450 366523 (GS1 DataBar Expanded St a cked) 1234890hjio9900 mnb (GS1 Dat aBar Expanded) 08672345650916 (GS1 DataBar Limited) [...]
-
Pagina 302
294 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 303
Product Reference Guide 295 Appendix E Keypad Use the barcodes in this appendix to enter numbers as you would select digits/characters from a keypad. 0 1 2 3 4 5[...]
-
Pagina 304
296 PowerScan ® PD7100 Corded 6 7 8 9 A B C[...]
-
Pagina 305
Product Reference Guide 297 D E F[...]
-
Pagina 306
298 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 307
Product Reference Guide 299 Appendix F Scancode Tables Control Character Emulation Control character emulation selects from different scancode tables as listed in this appen- dix. Each of the control character sets below are detailed by interface type in the tables. These apply to Wedge and USB Keyboard platforms. Control Character 00 — Character[...]
-
Pagina 308
Product Reference Guide 300 Interface Type PC AT PS/2 or USB-Keyboard Table 39. Scancode Set When Control Character is 00 or 01 Extended characters (sky b lue) are sent via dedicated keys (when a vailable in the sele cted countr y mode) or by an Alt Mode sequ ence . x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE xF 0x NULL C(S)+@ SOH C(S)+A STX C(S)+[...]
-
Pagina 309
Product Reference Guide 301 Interface Type PC AT PS/2 or USB-Keyboard — cont. Table 40. Scancode Set When Control Character is 02 x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE xF 0x Ar È Ar Ç Al È Al Ç Cl È Cl Ç Cr È Cr Ç BS Ta b Æ S+ T ab Enter Keypd Enter Ins Pg Up 1x Pg Dwn Home Å È Ç F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10 2x S[...]
-
Pagina 310
Product Reference Guide 302 Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode Table 41. Scancode Set When Control Character is 00 or 01 x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE Xf 0x Alt+000 Alt+001 Alt+002 Alt+003 Alt+004 Alt+005 Alt+006 Alt+007 Alt+008 HT TA B Alt+010 Alt+01 1 Alt+012 CR Enter Alt+014 Alt+015 1x Alt+016 Alt+017 Alt+[...]
-
Pagina 311
Product Reference Guide 303 Interface type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode — cont. Table 42. Scancode Set When Control Character is 02 x0 x1 x2 x3 x4 x5 X6 x7 x8 x9 xA xB xC xD xE xF 0x Ar È Ar Ç Al È Al Ç Cl È Cl Ç Cr È Cr Ç BS Ta b Æ S+ T a b Enter Keypd Enter Ins Pg Up 1x Pg Dwn Home Å È Ç F6 F1 F2 F3 F4 F5 ES[...]
-
Pagina 312
Product Reference Guide 304 Digital Interface Table 43. Scancode Set When Control Character is 00 or 01 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x NULL C(S)+@ SOH C(S)+A STX C(S)+B ETX C(S)+C EOT C+D ENQ C(S)+E ACK C(S)+F BEL C(S)+G BS C(S)+H HT TA B LF C(S)+J VT C(S)+K FF C(S)+L CR Enter SO C(S)+N SI C(S)+O 1x DLE C(S)+P DC1 C(S)+Q DC2 C(S[...]
-
Pagina 313
Product Reference Guide 305 Digital Interface — cont. Table 44. Scancode Set When Control Character is 02 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x Cl È Cl Ç BS Ta b Æ S+ T ab Enter Keypd Enter Ins 1x Å È Ç F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10 2x S p a c e ! “ # $ % & ‘() * + , - . / 3x 0123456789 : ; < = >? 4x[...]
-
Pagina 314
Product Reference Guide 306 IBM31xx 102-key Table 45. Scancode Set When Control Character is 00 or 01 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x NULL C(S)+@ SOH C(S)+A STX C(S)+B ETX C(S)+C EOT C+D ENQ C(S)+E ACK C(S)+F BEL C(S)+G BS C(S)+H HT TA B LF C(S)+J VT C(S)+K FF C(S)+L CR Enter SO C(S)+N SI C(S)+O 1x DLE C(S)+P DC1 C(S)+Q DC2 C(S)+[...]
-
Pagina 315
Product Reference Guide 307 IBM31xx 102-key — cont. Table 46. Scancode Set When Control Character is 02 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x Ar È Ar Ç Al È Al Ç Cl È Cl Ç Cr È Cr Ç BS Ta b Æ S+ T a b Enter Keypd Enter Ins Pg Up 1x Pg Dwn Home Å È Ç F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10 2x S p a c e ! “ # $ % &[...]
-
Pagina 316
Product Reference Guide 308 IBM XT Table 47. Scancode Set When Control Character is 00 or 01 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x NULL C(S)+@ SOH C(S)+A STX C(S)+B ETX C(S)+C EOT C+D ENQ C(S)+E ACK C(S)+F BEL C(S)+G BS C(S)+H HT TA B LF C(S)+J VT C(S)+K FF C(S)+L CR Enter SO C(S)+N SI C(S)+O 1x DLE C(S)+P DC1 C(S)+Q DC2 C(S)+R DC3 C(S[...]
-
Pagina 317
Product Reference Guide 309 IBM XT — cont. Table 48. Scancode Set When Control Character is 02 X0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 0x Ar È Ar Ç Al È Al Ç Cl È Cl Ç Cr È Cr Ç BS Ta b Æ S+ T a b Enter Keypd Enter Ins Pg Up 1x Pg Dwn Home Å È Ç F6 F1 F2 F3 F4 F5 ESC F7 F8 F9 F10 2x S p a c e ! “ # $ % & ‘() *[...]
-
Pagina 318
310 PowerScan ® PD7100 Corded Microsoft Windows Codepage 1252 Windows-1252 is a character encoding of the Latin alphabet, used by default in the leg- acy components of Microsoft Windows in English and some other Western languages.[...]
-
Pagina 319
Microsoft Windows Codepage 1252 Product Reference Guide 311 NOTES[...]
-
Pagina 320
312 PowerScan ® PD7100 Corded NOTES[...]
-
Pagina 321
Product Reference Guide 313 Index A Ambient Light Immunity 272 B bar codes RS-232 baud rate 85 RS-232 parameters parity 260 , 262 , 264 , 267 , 269 barcodes cancel 295 numeric barcodes 295 RS-232 parameters parity 76 Beeper Pitch, Good Read 25 , 26 Volume, Good Read 28 Beeper Volume 272 Beeper, Good Read 23 C Cable Pinouts 273 clamshell retainer 6 [...]
-
Pagina 322
314 PowerScan ® 7100 Corded L Light Source 271 M Mixed OEM Standard + Code 3 9 For- mat 93 N numbers lock key 77 O Operating Temperature 272 P Performance Characteristics 271 Physical Characteristics 271 Pitch – Good Read, Beeper 25 , 26 Pitch Tolerance 271 Prefix/Suffix 96 Print Contrast Minimum 272 Product Specifications 271 Programming Barcod[...]
-
Pagina 323
ASCII Chart ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . He x No . NUL SOH STX ETX EO T ENQ AC K BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F SP ! “ # $ % & ’ ( ) * + , -[...]
-
Pagina 324
Aus tral ia Datalogic Scanning Pt y Ltd T elephone: [61] (2) 9870 3200 australia.scanning@datalog ic.com Fr ance and Benelux Datalogic Scanning Sarl T elephone: [33].01.64.86.71.00 france.scanning@datalogic.com Ger man y Datalogic Scanning GmbH T elephone: 49 (0) 61 51/93 58-0 germany .scanning@datalogic.com Indi a Datalogic Scanning In dia T eleph[...]