Fujitsu B19-5 ECO manuale d’uso

English B17-5 ECO/B19-5 ECO Operating Manual Display[...]

Do you have ... ... any technical questions or problem s? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: " http://ts. fujitsu. com/sup port/" ) • your sales partner • your sales of fi ce The latest information about our products, useful tips, up[...]

[...]

Copyright © Fujitsu Technology Solutions 2009 2009/05 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. T echnical data subject to modifi cations and delivery subject to availability . Any liability th[...]

FUJITSU B17-5 ECO / B19-5 ECO Y our LCD screen.. . 1 Important notes 3 Getting st arted 7 Operation 14 T roubleshooting 23 Notes regardi ng the DIN EN ISO 13406-2 standard 25 T echnical spe ci fi cation 26 Operating Manual[...]

VESA, DDC and DPMS are registered trademarks of the V ideo Electronics Standards Associati on. Copyright © Fujitsu T echnology Solutions GmbH 2009 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Offenders will be liable for damages. All rights reserved, including righ[...]

Content s Contents Y o u r L C D s c r e e n . . . ............................. ................... ................... .. 1 T a r g e t g r o u p ......................... ................... .................. .............. 1 F u r t h e r i n f o r m a t i o n ................... ................... .................. .............. 2 Notation[...]

Contents A26361-K1317-Z220-1-7619, edition 2[...]

Y our LCD screen... Y our LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film T ransistor; active matrix) • minimal space requirements tha nks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture de fi nition and colour purity right into the corners) • h[...]

Y our LC D screen... Further information Details of how you set the resolution and refresh rate are provided in the documentation for your display adapter and the associated driver software. For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended. Because of the technology used (active m atrix) an LCD monitor provides a tota[...]

Important notes Important notes Impor tantnotes Notes In this chapter you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the re levant safety regulations for data processing equipment, including electronic of fi ce ma chines for use in an o[...]

Important n otes • The device must only be operated in landsc ape mode (0°) and portrait mode (90°). The control buttons are located in the middle of the bottom of the monitor in landscape mode (0°) and at the left-hand side of the monitor i n portrait mode (90°). • Store this manual close to the device. If you pass the device on to third p[...]

Important notes CE marking The shipped version of this device complies with the requirements o f EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive". Energy Star EnergyStar The Fujitsu LCD colour monitor is equipped with a power management system which reduces the power draw in OF F [...]

Important n otes Disposal and recycling This device has been manufacture d as far as possible from materials w hich can be recycled or disposed of in such a way that the environment is not damaged. The device may be taken back after use to be reused or recycled, provided th at it is returned in a condition that be fi ts its intended use. Any compo[...]

Getting sta rted Getting started Unpacking and checking the delivery The display surface of the device is s ensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) • one data cable (DVI-D) • one audio cable • one power cable • one CD with soft[...]

Getting started Setting up an ergonomic video w orkstation 1 ► Do not position the video workstation opposite a window (1). 1 ► Position the monitor outside the reach of a light source (1). 1 ► Position the keyboard where it is easiest to reach (1). 8 A26361-K1317-Z220-1-7619, edition 2[...]

Getting sta rted 1 50 cm ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 30 30 65 65 0 60 1 2 2 ► Position the monitor for optimum viewing (1). The monitor s hould under no circumstances fall outside the permissible viewing space ( 2). Depending on the situation, it may be advisable to use a swivel arm or wall[...]

Getting started Adjusting the height The height of the monitor can be adjusted by ap proximately 120 mm. ► Grasp the monitor with both hands on the right and left edge of the casing and move it upward or downward. Adjusting the inclination ► Hold the monitor with b oth hand s on the left and right sides of the casing and move it to the desired [...]

Getting sta rted Removing monitor base Before you can use a swivel arm or a wall bracket, you must rem ove the monitor base. The display surface is suscept ible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ► Lay the monitor on its face on a soft surface. ► Remove all cables. ► T o remove the monit[...]

Getting started Connecting the device Please observe the safety information in "Im portan t notes", P age 3 . CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. ► Switch off t he monitor and the computer . ► Disconnect the power plug from the computer. Connecting cables to the mon it or[...]

Getting sta rted 1 2 3 4 5 0 - ECO / BASIC 1 = Green standby mode sw itch 2 = Power connector 3 = AUDIO-IN socket 4 = DVI-D socket (DVI) 5 = D-SUB socket (VGA) ► Connect one of the connectors of the data cable to the D-SUB socke t or DVI-D socket of the monitor and secure the plug-in connection by tightening the sa fety screws. The monitor automa[...]

Operation Operation Switching the device on and off 2 1 1 = Power supply indicator 2 = ON/OFF s witch Press the buttons from the bottom up. The colour of the LED indicator changes as follows: LED indicator Status blue Monitor and computer are s witched on (normal mode). green Monitor and computer are switched on (ECO mode). orange The monitor is no[...]

Operation In switch position "0" (ECO), green standby mode is activated, in which the monitor consumes ≤ 0.1 W. If the monitor cannot be switched on and remains dark, the switch must be set to "-" (BASIC ). The monitor then consumes < 1 W in standby mode. ► Switch the device on using the ON /OFF switch. Only switch on the[...]

Operation Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. With the OSD menu not activated, you can make the f[...]

Operation Activate/ deactivate ECO operat ing mode The power consumption of the device can be decreased b y reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the E CO operating mode on or off.  The message ECO on / off is displayed. If the ECO operating mode is activated, the fo llowing OSD settings are change[...]

Operation The OSD menu is available in various languages. The English menu names are used in the following description (default setting). Y ou can select another language using t he OSD Language function in the OSD S etup menu. ► Press the SELECT/MENU button to activate the OSD menu.  The main menu appears, with icon s for the setting function[...]

Operation If you wish to change other settings, select the corresponding functi on from the OSD main menu. All possible adjustments of the main menu are described below. OSD menu functions The OSD menu for analog monitor operation is described below . During digital operation some functions are not available, as they are not required due to the dig[...]

Operation Adjusting the picture s ize and position Open the Image adjust window H-position Adjusting the horizontal position With this function you ca n move the picture to the left or to t he right. V - position Adjusting the vertical position With this function you can move the picture up or down. Clock Adjusting the synchronisation With this fun[...]

Operation Adjust ing the disp lay of the OSD m enu Callin g the OSD Setup adjustment window Language Selecting the language for the OSD menu With this function you choose between English (default setting), French , German, Italian and Sp anish as the language for the O SD menu. OSDH position Setting the horizontal position of the OSD menu With this[...]

Operation Displaying inf ormation Call the Information setting w indow With this function the model designation, serial number , resolution, H/V frequency , input signal and polarity of the synchronisation signal are displayed. 22 A26361-K1317-Z220-1-7619, edition 2[...]

T roubleshooting T roubleshooting Should an error occur , fi rst check t he following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on a nother computer . If you are unable to solve the problem, please inform our help desk. Having this p roblem? Check the following poin ts: No screen display Power i[...]

T roubleshootin g Having th is problem ? Check the following points: Picture dis turbances (ve rtical lines) ► Press the EXIT / AUT O button to perform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture noise) ► Press the EXIT / AUT O button to perform auto-adjustment of the screen. The screen becomes darker The back[...]

Notes regarding the DIN EN ISO 13406- 2s t a n d a r d Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today c annot guarantee an absolutely fault-free screen display . A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of [...]

T echnical speci fi cation T echnical speci fi cation Condensation is not permitted, n either in the rated range of operation nor in the limit range of operation. B17-5 ECO B19-5 E CO Dimensi ons and wei ght Visible diagonals 43 cm 48 cm Dot pitch 0.264 mm 0.294 mm Width 337.9 mm 376.3 mm Image size Height 270.3 mm 301 mm Maximum resolution 1280 [...]

T echnical speci fi cation Environm ental condit ions Environment class 3K2, DIN IEC 721 Rated range o f operation Humidit y 15 °C .... 35 °C 20 % .... 85 % Limit range of operation Humidit y 5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Y our monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Elec[...]

T echnical speci fi cation S U BDp o r t 6 10 11 15 51 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7 Video ground green 8 Video ground blue 9 +5 V (DDC) 10 Sync. ground 11 Ground 12 DDC Data 13 H. sync 14 V . sync 15 DDC Clock 28 A26361-K1317-Z220-1-7619, edition 2[...]

T echnical speci fi cation DVI-D port 9 1 17 Pin Meaning 1 TMDS Data2– 2 TMDS Data2+ 3 TMDS Data 2/4 Shield 4 not connected 5 not connected 6 DDC Clock 7 DDC Data 8 Analog V ertical Sync 9 TMDS Data1– 10 TMDS Data1+ 11 TMDS Data 1/3 Shield 12 not connected 13 not connected 14 +5V Power 15 Earth 16 Hot Plug Detect 17 TMDS Data0– 18 TMDS Data0[...]