Hitachi DN 10DY manuale d’uso

1 INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS FOR CORDLESS ANGLE DRILL MODEL DN 10DY Variable speed WARNING: Improper and unsafe use of this power tool can result in death or serious bodily injury! This manual contains important information about product safety. Please read and understand this manual before operating the power tool. Please keep this[...]

2 — CONTENTS — Page IMPORTANT INFORMATION .................................................................................... 3 MEANINGS OF SIGNAL WORDS ............................................................................. 3 SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS .................................................[...]

3 IMPORTANT INFORMATION Read and understand all of the operating instructions, safety precautions and warnings in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often b[...]

4 SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS WARNING: Death or serious bodily injury could result from improper or unsafe use of power tools. To avoid these risks, follow these basic safety instruc- tions: READ ALL INSTRUCTIONS 1. NEVER TOUCH MOVING PARTS. Never place your hands, fingers or other body parts near the tool ’ s m[...]

5 8. KEEP CHILDREN AWAY. Do not let visitors contact tool. All visitors should be kept safely away from work area. 9. DON ’ T FORCE TOOL. It will do the job better and safer at the rate for which it was intended. 10. USE RIGHT TOOL. Don ’ t force small tool or attachment to do the job of a heavy-duty tool. Don ’ t use tool for purpose not int[...]

6 20. HANDLE TOOL CORRECTLY. Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel. 21. CHECK FOR LIVE WIRES. Avoid the risk of severe electrical shock by checking for live electrical wires th[...]

7 IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE CORDLESS ANGLE DRILL WARNING: Death or serious bodily injury could result from improper or unsafe use of the cordless angle drill. To avoid these risks, follow these basic safety instructions: 1. Never place hands or other body parts near the drill bit or chuck during operation. Hold the drill by its h[...]

8 Table 1 RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS AC Input Rating Amperes* AWG Size of Cord Equal to or but less Length of Cord, Feet (Meter) greater than than 25 (7.5) 50 (15) 100 (30) 150 (45) 0 2 18 18 18 16 2 3 18 18 16 14 3 4 18 18 16 14 1250watts 125 volts = 10 amperes * If the input rating of a battery charger i[...]

9 1. NEVER disassemble the battery. 2. NEVER incinerate the battery, even if it is damaged or is completely worn out. The battery can explode in a fire. 3. NEVER short-circuit the battery. 4. NEVER insert any objects into the battery charger ’ s air vents. Electric shock or damage to the battery charger may result. 5. NEVER charge outdoors. Keep [...]

10 䡬 Battery (EB9, EB9B) Fig. 1 Terminal Hole Nameplate OPERA TION AND MAINTENANCE NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool[...]

11 MODEL UC12Y UC14YF / UC14YF2 Input power source Single phase: AC 120V 60 Hz Charging time EB12 ....... Approx. 60 min. EB12 ....... Approx. 45 min. (At a temperature of 68 ° (F20 ° C)) EB12B .... Approx. 60 min. Charging voltage DC 2.4 – 12V DC7.2 – 14.4V Charging current DC 1.3A DC 1.9A Weight 2.9 lbs. (1.3 kg) 2.9 lbs. (1.3 kg) Motor DC [...]

12 ACCESSORIES WARNING: Accessories for this power tool are mentioned in this Instruction Manual. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. STANDARD ACCESSORIES OPTIONAL ACCESSORIES.....sold separately 1. Battery (EB9, EB9B) Fig. 4 DN10DY (1HCK) 1 Phillips bit (No.2) (Code No. 983006)[...]

13 2. Phillips bit Use ..... Driving of wood screws and tapping screws with the head of a plus groove Size .... No. 1, No. 2, No. 3 3. Slotted bit Use ..... Driving of wood screws with the head of a minus groove Size .... 1/8" (3mm), 5/32" (4mm), 1/4" (6.35mm) 4. Iron-working drill bit Use ..... Drilling various metals and lumber, ma[...]

14 REMOVAL AND INSTALLATION METHOD OF BATTERY 䡬 How to remove the battery. Hold the handle tight. Press the latch located at the front of the battery and pull out the battery. (Fig. 9) 䡬 How to install the battery. Position the battery so that the latch faces toward the switch trigger in the handle and insert the battery. (Fig. 9) CHARGING METH[...]

15 3. Charging 䡬 When the battery is connected to the battery charger, charging will commence and the pilot lamp will light in red. (See Table 2) NOTE: If the pilot lamp does not light, pull out the plug from the receptacle and check if the battery is properly mounted. 䡬 When the battery is fully charged, the pilot lamp will blink in red slowly[...]

16 (3) Regarding recharging time (At 68 ° F (20 ° C)) Depending on the combination of the charger and batteries, the charging time will become as shown in Table 4. NOTE: The charging time may vary according to temperature and power source voltage. 4. Disconnect battery charger from the receptacle. CAUTION: Do not pull the plug out of the receptac[...]

17 How to make the batteries perform longer. (1) Recharge the batteries before they become completely exhausted. When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter. (2) Avo[...]

18 3. Check the direction of rotation. The bit rotates clockwise (viewed from the rear side) by pushing the R-side of the selector button. The L-side of the selector button is pushed to turn the bit counterclockwise. (See Fig. 12) (The and marks are provided on the body.) 4. Switch operation 䡬 When the switch trigger is pulled, the bit ro- tates.[...]

19 MAINTENANCE AND INSPECTION CAUTION: Pull out battery before doing any inspection or maintenance. 1. Checking the condition of the bit. The bits should be checked regularly. If worn or broken bits can slip or decrease the efficiency of the motor and burn it out. Replace worn bits with new ones. CAUTION: If you use a driver bit of which point is w[...]

20[...]

21 Item Part Name No. 1 Metal 2 Spindle 3A Drill Chuck 10TLRD-N 4 Flat Hd. Screw (Left Hand) M5 × 17 5 Bind Screw M3 × 7 6 Fin 7 Second Pinion 8 Motor 9 Internal Wire (A) 10 Internal Wire (A) 11 Housing (A) • (B) Set 12 Tapping Screw (W/Washer) M3 × 16 13 Name Plate 14 Terminal (B) 15 Terminal Support 16 Terminal (B) 17 Battery EB9 18 DC-Speed[...]

22[...]

23[...]

24 205 Code No. C99058363 Printed in Ireland Please contact HITACHI KOKI U.S.A. LTD. at 1-800-59-TOOLS (toll free), or HITACHI AUTHORIZED POWER TOOL SERVICE CENTER regarding COLLEC- TION. Issued by Shinagawa Intercity T ower A, 15-1, Konan 2-chome, Minato-ku, T okyo 108-6020, Japan Distributed by 3950 Steve Reynolds Blvd. Norcross, GA 30093 Hitachi[...]