LG L1730SF-BV manuale d’uso

M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. S ee the label attached on the back cover and quote this information to your dealer when you require service. User ’ s Guide L1730SF[...]

A1 This unit has been engineered and manufactur ed to ensure your personal safety , however improper use may r esult in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display , observe the following basic rules for its installation, use, and servicing. On Safety Use only the[...]

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventil[...]

A3 Connecting the Display Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached devices is turned off. Positioning your display 1. Remove the tape. Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should[...]

A4 Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. 3. Press button on the front switch panel to turn the power on. When monitor power is turned on, the &apos[...]

A5 Connecting the Display T o Use T ouch Screen Select and Install the driver CD provided. * Do not select "install PS/2 inter face driver" while installing the touch screen driver for the Hantouch. 1) Insert the driver installation CD for the ITM touch screen. 2) See the touch screen software installation CD for more information and assi[...]

A6 Connecting the Display Touch Screen RS-232C < USB cable for the touch screen > Signal Cable Power Cord RS-232C Touch Screen USB < RS-232C cable for the touch screen > Touch Screen USB Signal Cable Power Cord RS-232C Touch Screen RS-232C NOTE Your purchased product and its accessories may look different from the items illustrated in t[...]

A7 Control Panel Functions MENU SET/AUTO - + Front Panel Controls Bottom Buttons Use these buttons to select or adjust functions in the On Screen Display. MENU Button Use this button to enter or exit the On Screen Display. - + Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be [...]

A8 Control Panel Functions Use this button to turn the display on or off. Power Button Use this button to enter a selection in the On Screen Display. SET/AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the SET/AUTO button before entering the On Screen Display(OSD). This will automatically adjust your display ima[...]

A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Contr ol system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adju[...]

A10 On Screen Display(OSD) Selection and Adjustment NOTE The order of icons may differ depending on the model (A10~A14). The following table indicates all the On Screen Display contr ol, adjustment, and setting menus. PICTURE COLOR POSITION TRACKING SETUP Main menu Sub menu Reference PRESET sRGB 6500K 9300K RED GREEN BLUE To adjust the brightness, [...]

A11 On Screen Display(OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Y ou were intr oduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Bu[...]

A12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. PICTURE PICTURE PR[...]

A13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of cha[...]

A14 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description To adjust the USER sub-menu function, Press the SET Button MOVIE TEXT NORMAL BRIGHTNESS ACE 1 2 RCM SAVE USER MENU S E T USER When you execute F-ENGINE, two tone will appear on the screen as shown in the picture. The applied screen will [...]

A15 T roubleshooting No image appears Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHEC[...]

A16 T roubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. The screen color is mono or abnormal. The screen blinks. Press the SET/AUTO button to automatically adjust your display im[...]

A17 T roubleshooting Have you installed the display driver? Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our [...]

A18 Specifications NOTE Information in this document is subject to change without notice. 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 43.2 cm 0.264 mm pixel pitch Horizontal Freq. 30 - 83kHz (Automatic) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate Sync, Positive / Negative Composite Sy[...]

A19 Specifications Preset Modes (Resolution) Indicator On Mode Sleep Mode Off Mode green amber off LED Color MODE Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 13 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 10[...]

A20 Controlling the Multiple Monitors Connecting the cable Connect the RS-232C cable as shown in the picture. * The RS-232C protocol is used for communication between the PC and monitor. You can turn the monitor on/off, select an input source or adjust the OSD menu from your PC. Baud Rate : 9600bps (UART) Data Length : 8bits Parity Bit : NONE Stop [...]

A21 Controlling the Multiple Monitors Command Reference List COMMAND1 COMMAND2 DATA(Hexa) 01. Power k a 0, 1 02. Contrast k g 0 - 64 03. Brightness k h 0 - 64 04. Color k u 0, 2 Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. * [Command 2]: Second command. * [Set ID]: You can adjust the set ID to choose desir[...]

A22 Controlling the Multiple Monitors Power On (Command:a) To control Power On/Off of the monitor. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Data 0 : Power Off 1 : Power On Acknowledgement [a][ ][Set ID][ [...]

A23 Controlling the Multiple Monitors T ransmission / Receiving Protocol Brightness (Command:h) To adjust screen brightness. You can also adjust brightness in the Contrast/Brightness menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping’ as shown below. Acknowledgement [h][ ][Set ID][ ][OK][Data][[...]

A24 How to Install the VESA Standard wall mounting VESA wall mounting Connected to another object (stand type and wall-mounted type. This monitor accepts a VESA-compliant mounting interface pad.- optional ) For further information, refer to the VESA Wall Mounting Instruction Guide. Kensington Security Slot - optional Connected to a locking cable th[...]

Digitally yours[...]