-
Pagina 1
Operating and installation instructions Frost-free freezer FN 11827 S FN 12827 S FN 12827 S edt/cs To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 171 780 e n-G B[...]
-
Pagina 2
Guide to the appliance .............................................4 Caring for the environment ..........................................5 Warning and Safety instructions .....................................6 How to save energy ...............................................1 1 Switching on and off ..............................................1[...]
-
Pagina 3
Problem solving guide ............................................2 8 Noises .........................................................3 0 After Sales / Guarantee ............................................3 1 Electrical connection ..............................................3 2 Installation ......................................................3[...]
-
Pagina 4
a On/Off button b Temperature selector button c Temperature display a Frost free system b Shallow freezer drawer c Freezer drawers d Super freeze button and indicator light e Alarm off button and indicator light Guide to the appliance 4[...]
-
Pagina 5
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Disposal of your old applia[...]
-
Pagina 6
This appliance complies with all relevant legal safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes on t[...]
-
Pagina 7
Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. It could be dangerous. ~ If the connection cable is faulty it must only be replaced by a service technician authorised by the manufacturer to protect the user from danger. ~ This appliance contains the coolant [...]
-
Pagina 8
~ The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and tested regularly, and where there is any doubt, the household wiring system[...]
-
Pagina 9
Correct use ~ Never handle frozen food with wet hands. Your hands may freeze to the frozen food. Danger of frost burn. ~ Do not take ice cubes out with your bare hands and never place ice cubes or ice lollies in your mouth straight from the freezer. The very low temperature of the frozen ice or lollies can cause frost burn to the lips and tongue. ~[...]
-
Pagina 10
~ The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.g. a garage, can lead to the appliance switching off for longer per[...]
-
Pagina 11
Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not near to a heat source (radiator, oven). Near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where there is a high amb[...]
-
Pagina 12
Before using for the first time Protective foil On stainless steel appliances, the stainless steel door (and sides, depending on model) have a layer of protective foil to prevent damage during transportation. ^ Do not remove this foil until the appliance has been positioned in its final location. Cleaning ^ Clean the inside of the appliance and the[...]
-
Pagina 13
It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. To freeze fresh food and to store frozen fo[...]
-
Pagina 14
Temperature display The temperature display on the control panel always shows the required temperature. The temperature can be adjusted from: -15 °C to -32 °C The temperature display will flash if – the temperature in the appliance is not within the possible temperature range, – a different temperature is being set, – the temperature in the[...]
-
Pagina 15
Your appliance has been fitted with a warning system which ensures that the temperature in the freezer cannot rise unnoticed. An alarm will sound, and the temperature display and the alarm indicator light will flash if the temperature becomes too warm. The temperature the appliance is set at determines the temperature the appliance recognises as be[...]
-
Pagina 16
Switch the Super freeze function on before putting fresh food into the freezer. This helps food to freeze quickly and retain its nutrients, vitamins, flavours and appearance. Super freeze is not necessary: – when putting in food that is already frozen. – when freezing up to 2 kg fresh food daily. Switching on Super freeze When freezing small qu[...]
-
Pagina 17
Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate: "Freezing capacity ....kg/24 hrs". The maximum freezing capacity gi[...]
-
Pagina 18
Do not store food in the "inactive" drawers. The temperature is not controlled in these drawers and food stored in them would soon deteriorate. Example If you only require 3 freezer drawers as well as the freezer tray for storing frozen food: ^ Place food in the top 3 freezer drawers, leaving the other drawers empty. ^ Remove the fourth d[...]
-
Pagina 19
Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals. – The following types of food are not suitab[...]
-
Pagina 20
Before placing food in the freezer ^ When freezing more than 2 kg of fresh food, switch on the Super freeze function for some time before placing the food in the freezer (see "Super freeze"). This helps food that is already in the freezer to stay frozen. Placing food in the freezer The following maximum capacities must be observed: – to[...]
-
Pagina 21
Defrosting Frozen food can be defrosted in different ways: – in a microwave oven, – in an oven using the "Fan" or "Defrost" setting, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep other food cold), – in a steam oven. Poultry It is particularly important to observe food[...]
-
Pagina 22
Freezer tray The freezer tray is useful for freezing small items such as berries and vegetables. They can be frozen individually and therefore maintain their shape when defrosted. ^ Space the food out loosely on the tray. Leave the food for 10-12 hours to freeze thoroughly on the tray. Transfer it to a freezer bag or suitable container once frozen.[...]
-
Pagina 23
This freezer is equipped with a Frost free system. The freezer defrosts automatically. The moisture generated by defrosting settles on the condensor and is automatically dissipated from time to time. This automatic defrosting system enables the freezer to remain permanently ice-free, however, the food stored in the freezer will not defrost. Defrost[...]
-
Pagina 24
A range of Miele branded cleaning and conditioning products is available to order from Miele or www.miele-shop.com. Make sure that no water can penetrate into the electronic unit or into the ventilation gaps. Do not use steam cleaning apparatus to clean the appliance. Steam could reach the electrical components and cause a short circuit. The data p[...]
-
Pagina 25
Appliance door, side panels Remove any soiling from the appliance door and side panels im - mediately. If this is not done, it might become impossible to remove and could cause the surface to alter or discolour. All surfaces are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolour the surfaces. ^ The surfaces sh[...]
-
Pagina 26
Metal grille at the back of the appliance The metal grille at the back of the appliance (heat exchanger) should be dusted at least once a year. A build-up of dust will increase the energy consumption of the appliance. When cleaning the metal grille, make sure that the pipework and other components do not get broken or damaged in any way. After clea[...]
-
Pagina 27
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. What to do i f... . . . the appliance does n[...]
-
Pagina 28
. . . the alarm sounds and the alarm indicator light flashes. The temperature in the freezer is too warm, because ^ The door has been opened too frequently. ^ A large amount of food has been frozen at once without switching on the Super freeze function. ^ There has been a lengthy interruption to the power supply. The alarm will stop and the indicat[...]
-
Pagina 29
Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrr[...]
-
Pagina 30
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your applianc[...]
-
Pagina 31
Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensur[...]
-
Pagina 32
Do not place any appliance which gives off heat, such as a toaster or microwave oven, on top of this appliance, as this would increase the appliance's energy consumption. This appliance has side-wall heating and can be installed side-by-side with another refrigeration appliance. Please ask your supplier for details of suitable appliances. Loca[...]
-
Pagina 33
Ventilation Air at the back of the appliance gets warm. To ensure sufficient ventilation, the air inlet and outlet must not be covered or blocked in any way. They should be dusted on a regular basis. Installation ^ Remove the cable clip from the back of the appliance. ^ Check that all parts at the back of the appliance are unhindered. Carefully rem[...]
-
Pagina 34
Appliance dimensions ABC FN 11827 S FN 12827 S FN 12827 S edt/cs 1850 mm 600 mm 630 mm Installation 34[...]
-
Pagina 35
To avoid a build-up of condensation and resultant damage, refrigerators and freezers should not normally be installed side-by-side. However, this appliance has side wall heating, and can be installed side-by-side with certain other Miele appliances. Your dealer will be able to advise you on which models are suitable. Installing the appliances Two p[...]
-
Pagina 36
Joining the two appliances together The following fixing parts are supplied: * Colour depending on model (the other colour variations are not needed) The following tools are supplied: r SW 10 spanner q SW2 allen key (not required) You will also need the following: – Spirit level – Cordless screwdriver – Torx ® 25 screwdriver ^ Before startin[...]
-
Pagina 37
^ Remove covers b at the top. Attaching the connecting plate will align the appliances in height and depth. If one of the appliances is higher than the other, start with the higher appliance: ^ Loosely screw connecting plate c to one of the appliances using two screws d . ^ Push connecting plate c until the middle ridge of the plate touches the sid[...]
-
Pagina 38
Attaching the connecting panel will align the appliances in depth. If one of the appliances protrudes further forward than the other, start with the further forward appliance: ^ Place the connecting panel g so that the vertical slots are on the side of the panel which will be be attached to an appliance first. Attach it loosely with two screws. ^ P[...]
-
Pagina 39
Installation steps at the front of the appliances ^ Screw in middle feet c completely. They must not come in contact with the floor. ^ Align the joined appliances using outer feet b . ^ Align the feet using the spanner supplied. ^ Position the front of the long stainless steel trim l in the gap, making sure that it is located above connecting panel[...]
-
Pagina 40
^ Push short trim m into the gap at the top of the appliances. Make sure that the front edge of the trim sits flush up against the edge of connecting plate c . ^ Fit cover n between the control panels. Make sure that the outer edges of the cover are flush with the control panels. The cover can be pulled out to adjust it to the right size. ^ Fit cov[...]
-
Pagina 41
To change the door hinging you will need the following tools : – a cross-slotted screwdriver, – a flat-bladed screwdriver, – a selection of Torx screwdrivers, – a spanner. Two people are needed for changing the door hinging. Removing the door handle ^ Pull door handle a towards you. Side section b slides back. ^ Pull side section b firmly b[...]
-
Pagina 42
Changing over the door ^ Close the appliance door. ^ Remove cover a by sliding it forwards from the back and then lifting it off. ^ Remove cover b by pulling it upwards. Caution. The appliance door is not secure once the hinge plate has been removed. ^ Loosen screws d in upper hinge plate c and pull it upwards and off. ^ Carefully lift the door off[...]
-
Pagina 43
^ Remove cap h from the bearing bush in the door and refit on the opposite side. ^ Using a screwdriver, remove spring clamp i from underneath the door and fit it on the opposite side. ^ Pull hinge pin a together with disc b and adjustable foot c upwards and off. ^ Remove cover cap d . ^ Undo screws e and take hinge plate f off. ^ Undo the screw of [...]
-
Pagina 44
^ Screw hinge plate f into position on the opposite side using the two outer long slots only. To make it possible to align the door later, do not replace the centre screw at this stage. ^ Refit hinge pin a together with disc b and adjustable foot c . Important. The notch at the bottom of the hinge pin should face towards the back. ^ Place the door [...]
-
Pagina 45
Refitting the handle Please make sure you follow the instructions below carefully when you refit the handle. The door seal will be damaged if the handle is fitted incorrectly. ^ Loosely attach the handle to the opposite side of the door with the two front screws b . Mounting plate c must be positioned on the side of the door so that when the door i[...]
-
Pagina 46
The appliance door can be aligned to the housing using the outer long slots in the lower hinge plate. In the following illustration the door is not shown in the closed position to make it easier to see what you have to do. ^ Remove centre screw a from the hinge plate. ^ Slightly loosen both outer screws b . ^ Align the door by sliding the hinge pla[...]
-
Pagina 47
a Top box b Appliance c Housing unit d Wall The appliance can be installed in a kitchen run. To match the height of the rest of the kitchen, the appliance can be fitted with a suitable top box a . A ventilation gap of at least 50 mm depth must be allowed for behind the appliance across the entire width of the top box for air to circulate. The cross[...]
-
Pagina 48
Alteration rights reserved / xx11 FN 11827 S, FN 12827 S, FN 12827 S edt/cs M.-Nr. 09 171 780 / 00[...]