NEC XP29 Xtra, XM29 Xtra manuale d’uso

1 R Multimedia Monitor User's Manual R 29 Xtra Xtra 29 NEC Technologies, Inc. 1250 N. Arlington Heights Road, Suite 500 Itasca, Illinois 60143-1248 R 29 Xtra Xtra 29 Printed in Thailand 78410091 MultiSync is a registered trademark of NEC Technologies, Inc. in the U.S.A. NEC is registered trademark of NEC Corporation.  1993 by NEC Technologi[...]

2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.[...]

3 MISE EN GARDE: A F I N D E R E D U IRE LES RISQUES D’ELECTRO- CUTION, NE PAS DEPOSER LE COUVERCLE, IL N’Y A AUCUNE PIECE UTILISABLE A L’INTERIEUR DE CET APPAREIL. NE CONFIER LES TRAVAUX D’ENTRETIEN QU’A UN PERSONNEL QUALIFIE. Ce symbole a pour but de prévenir l’utilisateur de la présence d’une tension dangereuse, non isolée se tr[...]

4 LIMITED WARRANTY NEC Multimedia Monitor Products NEC Technologies, Inc.(hereafter NECTECH)warrants this product to be free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Parts and labor are warranted for (1) One Year and CRT’s for (1) One year from the date of the first customer purchase. WHO IS PRO[...]

5 1. Introduction Introduction to the MultiSync XP29 Xtra/XM29 Xtra .............................................................. 1 Feature Highlights ...................................................................................................................... 1 2. Part Names and Functions Front View / Rear View ..........................[...]

6 1 2 OSM and IPM are trademarks of NEC Technologies, Inc. IBM PC/AT, PS/2, VGA, S-VGA, 8514/A and XGA are registered trademarks of International Business Machines Corporation. Apple and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft is a registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corpo[...]

7 PROCEED VIDEO 1 EXIT VIDEO 2 RGB 1 RGB 2/DTV POWER /STANDBY ▼ ▼  − ＋ Part Names and Functions DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4 5 6 7 8 ON 75 HIGH THROUGH OUT THROUGH OUT THROUGH OUT[...]

8 Terminal Board 5 6 AB DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4 5 6 7 8 ON 75 HIGH THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT IN RGB1 PC / EXT CTL 75 HIGH BNC IN IN R L(MON[...]

9 7 8 Terminal Board DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4 5 6 7 8 ON 75 HIGH THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT IN RGB1 PC / EXT CTL 75 HIGH BNC IN IN R L(MONO) [...]

10 9 10 Terminal Board I DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT 75 HIGH INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4 5 6 7 8 ON 75 HIGH THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT THROUGH OUT IN RGB1 PC / EXT CTL 75 HIGH BNC IN IN R L(MO[...]

11 79645721 POWER ON RGB 2 RGB 1 VIDEO 2 VIDEO 1 POSITION / CONTROL PROCEED EXIT SCAN NORMAL SIDE PIN HEIGHT WIDTH BRIGHT CONTRAST MUTE NORMAL VOLUME OFF DEGAUSS MULTIMEDIA MONITOR RD-354E 11 12 Remote Control Unit NOTE: When not in use the remote control unit is conveniently stowed in the holder on the rear panel. 1 POWER ON/OFF Press POWER ON to [...]

12 79645721 POWER ON RGB 2 RGB 1 VIDEO 2 VIDEO 1 POSITION / CONTROL PROCEED EXIT SCAN NORMAL SIDE PIN HEIGHT WIDTH BRIGHT CONTRAST MUTE NORMAL VOLUME OFF DEGAUSS MULTIMEDIA MONITOR RD-354E 13 14 Raster Control 7 WIDTH ( + / -) Adjusts the horizontal size of the image. 8 HEIGHT ( + / -) Adjusts the vertical size of the image. 9 SIDE PIN ( + / -) Adj[...]

13 16 15 Battery Installation and Replacement The remote control is powered by two 1.5V AA batteries. Remote Control Cautions • Do not drop or mishandle the remote control unit. • Do not get the remote control unit wet. If the remote gets wet, wipe it dry immediately. • Avoid heat and humidity. • When not using the remote control unit for a[...]

14 18 17 Functions of DIP SW Functions and Settings of DIP SW This DIP switch is used for Sync. Control, Intelligent Power Manager, External control, wireless control, and OSM control. To change a switch setting use a pointed object, such as a pen or pencil, to push the switch to the desired position. Set all the pins except No.7 to the OFF positio[...]

15 DIP SW REMOTE EXT SPEAKERS SPEAKERS MUST HAVE MORE THAN 5WATT RATING IMPEDANCE 8 OHM AC IN SPEAKER SELECT RIGHT LEFT INT EXT BNC IN IN R L(MONO) AUDIO VIDEO 1 S 1 2 3 4 5 6 7 8 ON RGB1 PC / EXT CTL BNC IN IN R L(MONO) AUDIO VIDEO 2 S IN IN OUT L(MONO) IN R 75 HIGH 75 HIGH 75 HIGH 75 HIGH 75 HIGH RGB AUDIO RGB 2 THROUGH OUT THROUGH OUT THROUGH OU[...]

16 22 21 Connecting Your PC or Macintosh Computer Connecting your PC or Macintosh computer to your MultiSync XP29 Xtra/ XM29 Xtra will enable you to display your computer's screen image. All of these following display standards are supported: VGA 640 x 480 for graphics, VGA 640 x 400 for graphics, VGA 640 x 350 for graphics, VGA 720 x 400 for [...]

17 Pin No. 1 2 3 12 13 14 15 4 5 6 7 8 11 10 9 23 24 D-Sub 15 Pin RGB Signal Composition Pin Assignments and Signal Levels for 15 pin RGB (Analog) Signal to be connected (D-SUB 15 pin) RED GREEN or Sync on Green BLUE SDA H. or Composite sync V.SYNC SCL GND GND GND GND GND GND No Connection No Connection D-SUB 15pin RGB Input Connector (ANALOG ONLY)[...]

18 26 25 External Speaker Connections External speakers may be connected to the monitor to reproduce sound from VIDEO 1, VIDEO 2, RGB 1 or RGB 2 signal sources. External speakers may be connected directly to the EXTERNAL SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs. WARNING: Speakers that are install[...]

19 27 28 Operation Power This section describes how to select a computer or video source and how to adjust the picture and sound. General Controls Before you turn on your MultiSync XP29 Xtra/XM29 Xtra monitor ensure that the computer or video source is turned on. 1)To adjust: 1. Turn On The Monitor The power button is on the front panel of the moni[...]

20 g. BRIGHT Press to adjust the brightness of video display. h. CONTRAST Press to adjust the contrast of video display. c. HEIGHT Press to adjust the vertical size of the image. d. SIDE PIN Press to adjust the curvature of the edges of the left and right side of the display image either inward or outward. The image should be adjusted to attain a s[...]

21 31 32 i. NORMAL( visual) Press to reset all the stored adjustment visual data and recall the factory preset data. When a specific control is selected, this key resets the selected visual adjustments. Accessing OSM Press the PROCEED key on the remote control or front bezel. To turn off OSM Press the EXIT key on the remote control or front bezel. [...]

22 V-position/V-height/V-linearity Controls Group The V-position/V-height/V-linearity Controls allow you to adjust the vertical position, vertical size and vertical linearity of the image. V-POSITION : Pressing + or - moves the image vertically up or down. V-HEIGHT : Pressing + or - increases or decreases the vertical size of the image (taller or s[...]

23 36 35 OSM Location/OSM Display Time Control You can choose where you would like OSM image to appear on your screen. Selecting OSM location allows you to manually adjust the OSM menu left, right, up, or down. The OSM menu will stay on as long as it is in use. In the OSM Turn Off Time submenu, you can select how long the monitor waits after the la[...]

24 DV Controls Group The DV controls allow you to select an RGB2 signal format, to emphasize the brightness of neutral tint, and to enhance the contrast by emphasizing black. RGB2 SOURCE SELECT : Pressing + selects AUTO, RGB, YC B C R , YP B P R , or RGB CTL in this order. Normally selecting AUTO allows the monitor to automatically distinguish betw[...]

25 Pressing the PROCEED key proceeds to the following adjustments TOP HORIZONTAL2 : Corrects the vertical lines on the top of the screen(edge). BOTTOM HORIZONTAL2 : Corrects the vertical lines on the bottom of the screen(edge). TOP VERTICAL2 : Corrects the horizontal lines on the top of the screen(edge). BOTTOM VERTICAL2 : Corrects the horizontal l[...]

26 42 41 All Visual Settings The above warning statement will appear to confirm that you do want to reset all visual settings. If you want to reset all visual settings, press PROCEED. The following items can be reset: BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP., R-GAIN, G-GAIN, B-GAIN, R-BIAS, G-BIAS, and B-BIAS. ALL Convergence Setti[...]

27 44 43 POWER ON MODE This control allows you to set the monitor to default to any one of its inputs each time the monitor is turned on. LANGUAGE OSM menus are available in six languages: English, German, French, Spanish, Italian, and Swedish. OSM windows have the following elements: Right-oriented delta symbol : indicates further choices are avai[...]

28 45 CONVERGENCE SETUP : Corrects mis-CONVERGENCE generated by earth’s magnetism. Normally set to MODE1. Select an appropriate mode according to your monitor’s location. Earth magnetism can be changed depending on where your monitor is located. MODE1 : For earth magnetism in the Northern Hemisphere MODE2 : For 0-earth magnetism MODE3 : For ear[...]

29 Command Communication Sequence When external equipment such as a personal computer gives the command to the XP29 Xtra/XM29 Xtra, the XP29 Xtra/XM29 Xtra returns an ACK. So make sure that the external equipment receives this ACK. The XP29 Xtra/XM29 Xtra returns an ACK if it has received the command correctly. If it has not received the command co[...]

30 50 49 XP29 Extra /XM29 Extra → PC Example: Input switching (VIDEO 1) from the PC to the XP29 Xtra/XM29 Xtra(when the address selector equals 0) PC → XP29 Xtra /XM29 Xtra XP29 Xtra /XM29 Xtra → PC COM1 9F Contents Power On Power Off Degauss Control Length 00 00 00 COM2 4E 4F A1 COM1 3F 7F Contents Power On (ACK) Power Off (ACK) Input Switch[...]

31 51 52 Troubleshooting Before arranging for service by the NEC Service Center, check the following to be sure repairs are needed. Problem No Picture or Sound Sound OK; poor picture with VIDEO signal input. Sound OK; poor picture with RGB signal input. Picture OK; poor or no sound. Poor sound from external speakers or stereo system speakers Remote[...]

32 Specifications 54 53 Video Output Terminals THROUGH OUT (Video 1, 2) 1.0Vp-p, 75 Ohms unbalanced (BNC Jack), Composite video signal, Sync-negative. THROUGH OUT (S-VIDEO 1, 2) Y : 1.0Vp-p, 75 Ohms unbalanced, Sync-negative. C : 0.28Vp-p, 75 Ohms unbalanced, Color burst level. Audio Input Terminals Left (Mono) : 0.5 Vrms, high impedance (Pin-Jack)[...]

33 56 55 Maximum Resolution RGB 1024( H) X 768(V) pixels VIDEO Horizontal: 500 lines /S-VIDEO Horizontal : 600 lines Video Bandwidth RGB: 60 MHz at-3dB (Note that source is RGB2 and in HIGH CONTRAST, MODE2 or AUTO at 40 kHz or over is selected.) Y P B P R ,Y C B C R and RGB CTL : 25MHz at-3dB (Note in HIGH CONTRAST, MODE2) VIDEO: 6 MHz at-3dB Displ[...]

34 Multisync PROCEED VIDEO 1 EXIT VIDEO 2 RGB 1 RGB 2/DTV POWER /STANDBY ▼ ▼  − ＋ 21.0'' (533mm) 20.4'' (518mm) 14.94'' (379.5mm) 25.4'' (645mm) 23.27'' (591mm) Dimensions 20.4'' (518mm) 58 57[...]

35 59 Input Signal Reference Chart Separate Sync. Timing Charts Composite Sync. 60 A B C DE VIDEO O P QR S VIDEO Sync. Polarity: Positive / Negative HORIZONTAL VERTICAL VIDEO A B CD E O P QR S VIDEO Sync. Polarity: Positive / Negative HORIZONTAL VERTICAL[...]

36 Composite Sync. & Video (Sync. on Green) 62 61 Recommended Sync Signal Timing Horizontal Duty should be 3 to 30%. Horizontal sync width should exceed 0.9 µ sec. Horizontal back porch should exceed 2.0 µ sec at sync on green and 1.2 µ sec at others except when at 15KHz. Horizontal blanking should exceed: 15.75; 10 µ sec, 31KHz< fH<6[...]

37 64 63 Typical Input Signal Timing Resolution Horizontal Frequency (A) Horizontal Period (B) Horizontal Pulse Width (C) Horizontal Back Porch (D) Horizontal Active Area (E) Hrizontal Front Porch 640 × 350 31.469KHz 31.778 µ sec 3.813 µ sec 1.589 µ sec 26.058 µ sec 0.318 µ sec 720 × 400 31.469KHz 31.778 µ sec 3.813 µ sec 1.589 µ sec 26.0[...]

38 66 65 Resolution Vertical Frequency (O) Vertical Period (P) Vertical Pulse Width (Q) Vertical Back Porch (R) Vertical Active Area (S) Vertical Front Porch 640 × 480 72.809Hz 13.735msec 0.079msec 0.740msec 12.678msec 0.238msec VESA 640 × 480 at 72Hz VESA 800 × 600 at 56Hz 800 × 600 56.250Hz 17.778msec 0.057msec 0.626msec 17.067msec 0.028msec [...]

39 68 67 Signal Identification for Raster Preset Hor - - NEG NEG POS POS NEG NEG NEG POS POS NEG NEG NEG POS POS POS NEG NEG NEG POS POS NEG NEG NEG POS POS NEG NEG NEG POS POS NEG NEG NEG POS Ver - - NEG POS NEG POS NEG NEG POS NEG POS NEG NEG POS NEG POS POS NEG NEG POS NEG POS NEG NEG POS NEG POS NEG NEG POS NEG POS NEG NEG POS NEG Hor - - - - -[...]

40 69 70 Service and Support Policies NEC Technologies is committed to providing the highest quality service and support for your MultiSync presentation monitor. A customer service group that is dedicated to the support of this product line is available to provide a single point of contact for technical support, trouble shooting, service and repair[...]