Nortel Networks BCM 1000 manuale d’uso

BCM 4. 0 Busine ss C ommunic ations Manager Docume nt S tatus: St anda rd Document V ersion: 02 Part Code : N0060603 Date: J une 2006 BCM 4 . 0 f or BCM1000 Inst allation and Maint enance Guide A ddendum[...]

Copyright © 2006 Nor tel Netw orks, All Rights Reserved All rights reserved. The information in this document is subj ect to change without notic e. The statements, configur ations, techni cal data, and recommendations in this document are belie ved to be accurate and re liable, but are presented wi thout express or implied warranty . Users must t[...]

3 BCM 4.0 for BCM100 0 Installati on and Maintenance Gu ide Addendum Subject to the terms hereinafter set forth, NORTEL NETWORKS grants to CUSTOMER and/or its representa tives, with a "need to know," a personal, non-exclusive license (1 ) to use the licensed software, proprietary to NORTEL NETWORKS or its suppliers and (2) to use the asso[...]

N0060603 4 Except for Java Product (as defi ne d herein below), C USTOMER may assign collectively its rights under this License to any subsequent owner of the associated hardware, but not otherwise, subject to the payment of the then current license f ee for new users, if any. No such assignment shall be valid until CUSOMTER (1) has delega ted all [...]

Contents 5 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Contents Chapter 1 About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 How to use t his addendum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 What’s new in BCM 4.0 . [...]

6 Contents N0060603 N0060603 Appendix A Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 About this g uide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Contents 7 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix F Completing the initial installation (optional) . . . . . . . . . . . . . . . . . . . . . . . . 57 Configuring the media bay module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Configuring m odem settin gs . . . . . . . . . . . .[...]

8 Contents N0060603 N0060603[...]

9 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Chapter 1 About this document The purpose of this addendum is to provide updates to the BCM1000 Installation an d Maintenance Guide (N0008587 01) for the rel ease of BCM 4.0 software. For information on upgrading to BCM 4.0 softwar e, refer to the Upgrade Guid e for BCM 4.0. How to u[...]

10 Chapter 1 About this document N0060603 N0060603 • UPS support over USB: UPS connecti vity through the USB port is supported in BCM 4.0 for the BCM200/400 system for g raceful shutdown (not supported on BCM1000). • Multimedia Contact Center: All custom f iles (html and txt) are case sensiti v e and must match the format sho wn in default inte[...]

11 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Chapter 2 Documentation updates for BCM 4.0 This section provid es updates to the BCM100 0 Installation and Ma intenance Guide (N0008587 01). General changes The following changes app ly throughout th e docum ent, even if not speci fically identified: • Replace references to Unifi[...]

12 Chapter 2 Documentat ion updates f or BCM 4.0 N0060603 N0060603 P a ge 33, Chapter 2, T elephony har dware The following informatio n should be deleted . BCM 3.0 software i ntroduced th e concept of Full Double Dens ity (FDD) and Partial Double Density (PDD). On the default system, DS30 02 to 05 were defaulted to FDD, which provides 32 new ports[...]

Chapter 2 Documentat ion updates f or BCM 4.0 13 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum P a ge 52, Legacy mobility equipment This section should be removed. The listed equipment, NetVision, Companion, and DECT, is not supported in BCM 4.0 (DECT is still supported in Eu ropean markets). P a ge 55, Chapter 3, A uxiliary equip[...]

14 Chapter 2 Documentat ion updates f or BCM 4.0 N0060603 N0060603 • Element Manager access is also supported through a Citrix server For information on downlo ading and installing Element Manager, refer to “Using Element Manager to set the basic parameters” on page 45 . P a ge 64, Explaining double density The paragraph at t he top of page 6[...]

Chapter 2 Documentat ion updates f or BCM 4.0 15 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum P a ge 110, Shutting down the system The procedure abou t how to shut down the system should be replaced with the following section. P erf orming a system shutdo wn If there is a need to perform main tenance, th e system may already be p[...]

16 Chapter 2 Documentat ion updates f or BCM 4.0 N0060603 N0060603 To shutdown the system hardware 1 Remov e the DS256 cables from the front of the BCM main unit and, if present, the e xpansion unit. This includes the da ta connections on the MSC. Mark the cables to ensure correct reco nnection. 2 T urn off the po wer switch located at the ba ck of[...]

Chapter 2 Documentat ion updates f or BCM 4.0 17 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum In Tables 37 and 38 on pag e 145 and 146 respec tively, the references to PDD shoul d be deleted. P a ges 160–161, New c hapters The following chapters should be inserted between Chapte r 13, “Installing optional telephony equipment?[...]

18 Chapter 2 Documentat ion updates f or BCM 4.0 N0060603 N0060603 P a ge 182, Initializing the hard disk (single-disk system BCM 3.0) This section should be removed. P a ge 184, Initializing the hard disk (single-disk system BCM 3.01 and newer systems) This section should be removed and re placed with the following information. Initializing the ha[...]

Chapter 2 Documentat ion updates f or BCM 4.0 19 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum You can monitor and co ntrol di sk mirroring through a contro l screen in Element Manager. Under Administration > System Status > Disk mirroring , you can access a screen that allows you to control the mirroring op eration from you[...]

20 Chapter 2 Documentat ion updates f or BCM 4.0 N0060603 N0060603 P a ge 229, Determining the status of a telephone The procedure, “To find out the status of a set,” should be modified as follows. To find out the status of a set 1 Open Element Manager and co nnect to your BCM system. 2 From the Configuration tab, click the Te l e p h o n y fol[...]

21 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix A Getting started About this guide The BCM 4.0 for BCM1000 Installation and Main tenance Guide Addendum describes how to install, conf igure, and ma intain the BCM2 00 and BCM400 hardware ru nning Business Communications Manager (BCM) 4.0 software. The concepts, operations,[...]

22 Appendix A Getting started N0060603 N0060603 ASM Analog station module (anal og station media bay module) A T A Analog ter minal adapter BCM Business Communications Manager BRIM Basic rate interface module (basic rate interf ace media ba y module) CAP Central answ ering position CF A Carrier failure alar m CLID Calling line id entification CO Ce[...]

Appendix A Getting started 23 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Symbols and con ventions used in this guide These symbo ls are used to highlight cr itical information for the BCM system. PSU P ower supply unit QoS Quality of ser vice RAI Remote alar m indication RAID Redundant array of independent disks REN Ringer equi[...]

24 Appendix A Getting started N0060603 N0060603 These conventions and symbols are used to repres ent the Busine ss Series Terminal display and dialpad. These text co nventions ar e used in thi s gui de to indicate the information described: Tip: Alerts you to additional information that can help you perform a task. ! Security Note: Indicates a poin[...]

Appendix A Getting started 25 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Related publications This section provides a list of ad ditional documents referred to in this guide. There are two types of publication: Technical Do cuments on page 25 and User Guides on page 26. Technical Documents System Installation Upgrade Guide (N00[...]

26 Appendix A Getting started N0060603 N0060603 Call Pilot CallPilot Mana ger Set Up and Operation Gu ide (N0027247) CallPilot Telephone Administration Guide (N0060618) User Guides There are no references to specific user guides. How to get help This section explains how to get help fo r Nortel products and services. Getting Help from the Nortel We[...]

Appendix A Getting started 27 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Getting Help through a Nortel distributor or reseller If you purchased a service contract for your Nort el product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller.[...]

28 Appendix A Getting started N0060603 N0060603[...]

Appendix B Initializing the system 29 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix B Initializing the system After you start the BCM system, you are ready to set the initial conf iguration parameters. The initial configuration defines your BCM system to the network. It also gives the system a unique identity and initial [...]

30 Appendix B Initializing the system N0060603 N0060603 If you must change the IP addres s (due to a conflict with your network), connect to the BCM system using an Ethernet crossov er cable (see “Using the Ethernet crossover cable” on page 30 ), through the serial port (see “Connecting through the serial po rt” on page 31 ), or change the [...]

Appendix B Initializing the system 31 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum 4 Start the computer . To configure your computer 1 From the Start menu, choose Settings then choose Control Panel . 2 Double-click the Network icon. 3 Select your TCP/IP adap ter , and then click the Pr operties button. 4 Click the IP Address tab [...]

32 Appendix B Initializing the system N0060603 N0060603 Null modem cable setup Ta b l e 3 and Figure 2 show the correct wiring for the BCM serial port of the null modem cable. Figure 2 Serial pinout T ransmission parameters: • 9600 bits per second • 8 data bits •n o p a r i t y • 1 stop bit • hardware flow control T o displa y the configu[...]

Appendix B Initializing the system 33 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum a If using a terminal emulation pr ogram (Hypert erminal), attach a conf iguration comp uter to the BCM main unit serial port (recommended meth od). b If you are accessing the BCM main unit through your local area network thro ugh SSH (secure socke[...]

34 Appendix B Initializing the system N0060603 N0060603 Software ke ycode You require a keycode to enab le software feat ures on the BCM system. You receive only one keycode whether you purchase one feature or a bundle of features. To generate a keycode, you re quire an authorization cod e for each feature you purchase . For example, if you have on[...]

Appendix C Configuring the BCM system 35 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix C Configuring the BCM system This section provides informa tion on config uring the basic BC M parameters. You can config ure more advanced parameters us ing Element Manager or Telset Administration after the BCM system is operational. [...]

36 Appendix C Configuring the BCM system N0060603 N0060603 Initial parameters o ver view The initial parameters are the required parame ters that can be configured using Telset Administration or Element Manager. See Table 4 for a list of the initial parameters. T able 4 Initial parameters P arameters T els et Admini stration Element Manager Keycode[...]

Appendix C Configuring the BCM system 37 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Star tup parameters o ver view The startup parameters are the re maining required parameters that cannot be configured using Telset Administration. These pa rameters must be configured using Element Manager. See Table 5 for a list of the startup[...]

38 Appendix C Configuring the BCM system N0060603 N0060603[...]

Appendix D Using Telset Administration to set the basic parameters 39 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix D Using Telset Administration to set the basic parameters Telset Administration allows you to use a digi tal telephone with a two- line display to set the BCM configuration parameters . You cannot set all th[...]

40 Appendix D Using Telset Administration to set the basic paramet ers N0060603 N0060603 Configuring the initial parameters Use the following procedures to configure the initial parameters for the BCM using Telset Administration: • “T o enter the keycodes” • “T o configure the IP address” • “T o configu re the modem” on page 41 ?[...]

Appendix D Using Telset Administration to set the basic parameters 41 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum 4 Press OK . 5 Press CHNGE to modify the IP settings. The display screen sho ws if DHCP is enabled or disabled. 6 Do one of the follo wing: a If DHCP is currently enabled: • Press DIS to disable DHCP . Y ou ha ve t[...]

42 Appendix D Using Telset Administration to set the basic paramet ers N0060603 N0060603 To select the telephony st artup template and start DN You set the template and start DN using Featur e **STARTUP from a two-lin e display telephone. Refer to the BCM 4.0 Telset Ad ministration Guide for information on usin g Telset Administration to set this p[...]

Appendix D Using Telset Administration to set the basic parameters 43 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum 12 Press CHNGE to change the password for the selected account. 13 Enter the ne w password for the account. 14 Enter the ne w password again to conf irm it. Refer to “To create user accou nts” on page 55 for more[...]

44 Appendix D Using Telset Administration to set the basic paramet ers N0060603 N0060603[...]

Appendix E Using Element Manager to set the ba sic parameters 45 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix E Using Element Manager to set the basic parameters The Element Manager application provides a comput er-based client interface that can connect to devices over an IP n etwork and display the programming interfac[...]

46 Appendix E Using Element Manager to set the basic paramete rs N0060603 N0060603 Prerequisites Element Manager has the follo wing system requirements: • W indows: W indows 98 SE, W indo ws 2000, W indo ws XP • RAM: minimum 256 MB, recommen ded 512 MB • free space: 150 MB • BCM Element Man ager access is also supported through a Citrix ser[...]

Appendix E Using Element Manager to set the ba sic parameters 47 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum To connect to th e BCM system 1 Open BCM Element Manager . 2 From the Network menu, select New Network Element , and then select Business Communications Manager . 3 Enter the BCM system IP address, the userna me, and pass[...]

48 Appendix E Using Element Manager to set the basic paramete rs N0060603 N0060603 To configure the LAN IP address 1 From the Configuration tab, click the Resources folder to e xpand it. 2 Select Network Interfaces . 3 Select the Interfaces tab . It is normally sel ected by default . 4 Select the LAN interface to conf igure. 5 From the Details pane[...]

Appendix E Using Element Manager to set the ba sic parameters 49 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum To configure the startup tem p late for telephony services 1 From the Administration tab, click the Utilities folder to ex pand it. 2 Select Reset . 3 Click Cold Reset T elephony Ser vices . The Cold Reset T elephony dial[...]

50 Appendix E Using Element Manager to set the basic paramete rs N0060603 N0060603 5 Click Instal l . Configuring the star tup parameters Use the following procedures to configure the startup parameters for the BCM system using Element Manager: • “T o enter a name for your system” • “T o configure the date and time settings” • “T o [...]

Appendix E Using Element Manager to set the ba sic parameters 51 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum 3 Configure the Date and T ime attrib utes (see Ta b l e 9 ). To configure DHCP server setting s 1 From the Configuration tab, click the Data Services folder to e xpand it. 2 Select DHCP Server . 3 Select the DHCP Setting[...]

52 Appendix E Using Element Manager to set the basic paramete rs N0060603 N0060603 8 Click the IP T erminal DHCP Options tab . 9 Configure the DHCP server attrib utes (see Ta b l e 1 1 ). To configure IP Phones 1 From the Configuration tab, click the Resources folder to e xpand it. 2 Select T elephony Resour ces . 3 From the Actual type column, sel[...]

Appendix E Using Element Manager to set the ba sic parameters 53 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum 4 Configure the IP T erminal Global Settings attributes (see Ta b l e 1 2 ). Y ou can configure other attrib utes on the IP T erminal Global Settings tab depending on the requirements for your system. To configure SNMP se[...]

54 Appendix E Using Element Manager to set the basic paramete rs N0060603 N0060603 5 Configure the attributes for Modify SNMP Settings (see Ta b l e 1 3 ). 6 Click Ok . To configure SNMP community strin gs 1 From the Configuration tab, click the Administrator Access folder to expand it. 2 Select SNMP from the Administrator Access folder . 3 Select [...]

Appendix E Using Element Manager to set the ba sic parameters 55 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum To create user accounts 1 From the Configuration tab, click the Administrator Access folder to expand it. 2 Select Accounts and Privileges from the Administrator Access folder . 3 Select the V iew by Accounts tab . 4 Clic[...]

56 Appendix E Using Element Manager to set the basic paramete rs N0060603 N0060603[...]

Appendix F Completing the init ial installation (optional) 57 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix F Completing the initial installation (optional) This section provides information on completing the initial installation of your BCM system. These options are described fo r informative purposes and do not have to [...]

58 Appendix F Completing the init ial installation (optional) N0060603 N0060603 After the basic configuration is completed, you can further customize your system by u sing the following configuration options: • “Configuring the media b ay module” • “Configuring modem settings” on page 59 • “Checking for softwa re updates” on page [...]

Appendix F Completing the init ial installation (optional) 59 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum You can set other parameters fo r the MBMs depending on the typ e of MBM you installed. Configuring modem settings Your system modem is either enabled or disa bled, depending on the config uration you chose during your basic[...]

60 Appendix F Completing the init ial installation (optional) N0060603 N0060603 Refer to the BCM 4.0 Administration Gu ide for information on performin g a backup and re store of your system.[...]

61 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Appendix G Market profile attributes This section describes some of the differences in the market profile attributes. These attributes are based on the market profile that you select when you configure the system. Each market profile is designed using a set of system attributes that[...]

62 Appendix G Market profile attribute s N0060603 N0060603 FEM MBM–Norstar trunk cartridg e combinations Norstar trunk cartridges can be connected to th e BCM system using the fiber expansion module (FEM). The following table provides a cross-re ference between market profiles and the Norstar trunk cartridges you can connect to the FEM. Germany ?[...]

Appendix G Market profile attr ibutes 63 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Time zones and language inf ormation This section provides informatio n about time and d ate format and language support for Central America and South America. Time and date f ormat based on language Time zones are based on the actual time zone [...]

64 Appendix G Market profile attribute s N0060603 N0060603 The format of th e time and dat e changes are based on the prime language of the market profile. Table 18 provides a list of formats based on language or country. Language suppor t for South America and Central America Table 19 shows th e language support for So uth American and Central Ame[...]

Appendix G Market profile attr ibutes 65 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Caller ID displa y f ormats The Caller ID function is supported o n telephones that provi de a display window. Caller ID formats consist of the name an d number of the calling party. The North America market profile supp or ts the following form[...]

66 Appendix G Market profile attribute s N0060603 N0060603 T elephony f eature setti ngs Conference tone suppor ted Ye s Ye s Ye s N o Ye s N o Held line reminder After 30 seconds Off Off Off Off Off Delay ring transf er After 15 rings After 4 rings After 4 ring s After 4 rin gs After 4 rin gs After 4 rings T ransf er callback timeout After 15 ring[...]

Appendix G Market profile attr ibutes 67 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Service modes Ringing ser vice mode Off Off Off Off Off Off Ringing ser vice trunk ans Ye s Ye s Ye s Ye s Ye s Ye s Restriction ser vice mode Off Off Off Off Off Off Restriction global overrides 000 131440 190 N/A N/A N/A N/A Restriction filter[...]

68 Appendix G Market profile attribute s N0060603 N0060603 Note: The field for n umber of rings is hid den in default mode (disabled). When y ou enter a value f or call f orward dela y , the field for number of rings becomes visible with the given def ault v alue. Dial tone detection Enabled Enabled Enab led Enabled Enabled Enabled Set preferences [...]

Appendix G Market profile attr ibutes 69 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum T elephony f eature setti ngs Conf erence tone suppor t ed N oY e s N oN oN oY e s Held line reminder Off O ff Off Off Off Off Delay ring transf er After 4 rings After 4 rin gs After 4 ring s After 4 rings After 4 rin gs After 4 rings T ransf er[...]

70 Appendix G Market profile attribute s N0060603 N0060603 Service modes Ringing ser vice mode Manual Manual Off Off Off M anual Ringing ser vice trunk ans Ye s Ye s Ye s Ye s Ye s Ye s Restriction ser vice mode Off O ff Off Off Off Off Restriction global ov errides N/A N/A N/A N/A N/A N/A Restr iction filter 01 N / A N / A 0 , 1(1800, 1877, 1888),[...]

Appendix G Market profile attr ibutes 71 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Note: The field for n umber of rings is hid den in default mode (disabled). When y ou enter a value f or call f orward dela y , the field for number of rings becomes visible with the given def ault v alue. Dial tone detection Enabled Enabled Ena[...]

72 Appendix G Market profile attribute s N0060603 N0060603 Protocols Digital trunking protocols ISDN D ASS2 DPNSS ISDN D ASS2 DPNSS ISDN ISDN D ASS2 DPNSS ISDN D ASS2 DPNSS ISDN D ASS2 DPNSS BRI trunk protocol variants ETSI-403 ETSI-QSIG ETSI-403 ETSI-QSIG NI-2 ETSI-403 ETSI-QSIG ETSI-403 ETSI-QSIG ETSI-403 ETSI-QSIG BRI S-loop protocol variant ETS[...]

Appendix G Market profile attr ibutes 73 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Service times Night Star t 23:00 End 07:00 Star t 23:00 End 07:00 Star t 23:00 End 07:00 Star t 23:0 0 End 07:00 Star t 23:00 End 08:00 Star t 23:00 End 07:00 Evening Star t 17:00 End 23:00 Star t 17:00 End 23:00 Star t 17:00 End 23:00 Star t 17[...]

74 Appendix G Market profile attribute s N0060603 N0060603 Public OLI Unknown number length V ar iable V ariable N/A V ar iable V ar iable V ariable Local number length V ar iable V ariable 7 V ariable V ar iable V ariable National number length V ariab l e V ariab l e 10 V ariab le V aria b le V aria b le Set capabilities Handsfree Auto None A uto[...]

Appendix G Market profile attr ibutes 75 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Protocols Digital tr unking protocols ISDN D ASS2 DPNSS ISDN D ASS2 DPNSS ISDN D ASS2 DPNSS ISDN D ASS2 DPNSS ISDN D ASS2 DPNSS BRI trunk protocol variants ETSI-403 ETSI-QSIG ETSI-4 03 ETSI-QSIG ETSI-403 ETSI-QSIG ITU-T ETSI-403 ETSI-QSIG BRI S-[...]

76 Appendix G Market profile attribute s N0060603 N0060603 Service times Night Star t 23:00 End 07:00 Star t 23:00 End 07:00 Star t 23:00 End 07:00 Star t 23:00 End 07:00 Star t 23:00 End 07:00 Evening Star t 17:00 End 23:00 Star t 17:00 End 23:00 Star t 17:00 End 23:00 Star t 17:00 End 23:00 Star t 17:00 End 23:00 Lunch Star t 12:0 0 End 13:00 Sta[...]

Appendix G Market profile attr ibutes 77 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Public OLI Unknown number length V ariab l e V ariab le V ariab l e V ariab le V aria b le Local number length V ariab l e V ariab le V ariab l e V ariab le V aria b le National number length V ariab l e V ariab le V ariab l e V ariab le V aria [...]

78 Appendix G Market profile attribute s N0060603 N0060603 Global analog trunk parameters This section contains information for the GAT M4 and GATM8 MBMs. Th e information in the tables applies to downloaded profiles only ; it is not applicabl e to DIP switch modes. Global analog trunks are not supported in th e followi ng market profile s: Denmark[...]

Appendix G Market profile attr ibutes 79 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Nor th Amer ica Y es N/A 60 40 700 P o land Y es [1] Po lish ASS_1_v1.doc [2] ITU-T T elecomm unication Standardization Sector of ITU Supplement2 Ser ies E 01/94 66 33 700 T aiwan Y es [1] T echnical Specifications for T erminal Equipment for Co[...]

80 Appendix G Market profile attribute s N0060603 N0060603 T able 26 Call supervision paramete rs Market prof ile Call supervision Link/flash time (ms) OSI time (ms) Force on-h ook time (ms) We t t i n g t i m e (ms) Ring confirmation count (ms) A ustralia 60 0 100 1600 0 150 Brazil 300 100 2000 N/A 256 CALA 600 100 1500 N/A 256 Canada 600 100 16 0[...]

Appendix G Market profile attr ibutes 81 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum GASM8 parameter s This section contains information for the GASM8 MBM. Global analog stations are not supported in the following market profiles: Brazil, CALA, Denmark, France, Germany, Holland , Italy, No rway, PRC, Spain, Sweden, Switzerland, [...]

82 Appendix G Market profile attribute s N0060603 N0060603 Global No (Nor th American based A-law) Nor th America N/A 600 Ω 3 dB CCITT A-law Hong K ong No (Nor th American based mu-l aw) Nor th America N/A 600 Ω 3 dB CCITT mu-l aw Me xico No (Nor th American based A-law) Nor th America N/A 600 Ω 3 dB CCITT A-law New Zealand No (UK-base d telepho[...]

Appendix G Market profile attr ibutes 83 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum T able 29 Loop interf ace and call super vision parameters Market prof ile Loop interface Call supervision Loop current limit Ringing frequency Ringing amplitude Min. seize duration Min answer duration Min/max recall duration Min clear duration [...]

84 Appendix G Market profile attribute s N0060603 N0060603 ISDN line services Table 31 shows the ISDN private network services that are su pported by BCM 4.0. Table 32 shows the network-based ISDN su pplementary serv ices and the features available for each. T able 31 ISDN line services MCDN over PRI (SL-1) DPNSS DA S S 2 ETSI Q SIG • Basic call [...]

Appendix G Market profile attr ibutes 85 BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum Analog and digital trunk types Table 33 provides a descriptio n of the ty pes of analog and digital trunks. Note that some of the analog and digital trunks ar e available only whe n you select specific market profiles. T able 33 Analog and digit[...]

86 Appendix G Market profile attribute s N0060603 N0060603 DPNSS A digital pr ivate network signaling syst em, which allows phone systems from different manuf acturers to be tied together ov er E1 lin es, off ering sign ificant enhancements to BCM networking capabilities. DPNSS makes it easier to suppor t centralized network functionality within pr[...]