Onkyo SR608 manuale d’uso

A V Receiv er TX-SR608 Instruction Manual Thank you for purchasing an Onkyo A V Receiv er . Please read this manual thoroughl y before making connections and plugg ing in the unit. Follo wing the in structions in this m anual will enable you to obtain opti mum performance and listening enjoyment from your new A V Receiv er . Please retain th is man[...]

2 En Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventilat ion openings. Install in accordance with the manuf acturer’ s instructions. 8. Do not install near a[...]

3 En Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording cop yrighted ma terial is illegal without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user -ser- viceable. If you cannot turn on the unit, contact your Onkyo de aler . 3. Care —Occasionally you should dust th[...]

4 En F or British models Replacement and mounting of an A C plug on the power supply cord of this unit should be performed only b y qual- ified service personnel. IMPOR T ANT The wires in the mains lead ar e coloured in accordance with the following code: Blue: Neutral Brown: Li ve As the colours of the wires in the mains lead of this appa - ratus [...]

5 En Contents Important Safety Instruction s ......................................... 2 Precautions ................................................................ ....... 3 Supplied Accessories ............................................... ....... 4 Using the Remote Controller .......................................... 4 Features ...... ......[...]

6 En Features Amplifier • 100 W atts/Channel @ 8 ohms (FTC) • 160 W atts/Channel @ 6 ohms (IEC) • 175 W atts/Channel @ 6 ohms (JEIT A) • WRA T–Wide Range Am plif ier T echnology (5 Hz to 100 kHz bandwidth) • Optimum Gain V olume Circuitry • H.C.P .S. (High Current Po wer Supply) Massi ve High Po wer T ransformer • Jitter Cleaning Ci[...]

7 En *9 SIRIUS, XM and all relat ed ma rks and logos are trademarks of Sirius XM R adio Inc. and its subsidiaries. All other marks and logos are the property of their respectiv e owners. All rights reserved. SIRIUS subscription sold separately . T axes and a one-time activ ation fee may apply . SIRIUS tuner required (sold separately) to receive the[...]

8 En Fr ont & Rear P anels North American and T aiwan models Europ ean, A ustralian and Asi an models The actual front panel has v arious logos printe d on it. They are not sho wn here for clarity . The page numbers in parentheses show where you can f ind the main explanation for each item. a ON/ST ANDBY button ( ➔ 22 ) b ST ANDBY indicator ([...]

9 En For detailed information, se e the pages in parentheses. a A udio input indicators b Listening mode and format indicators ( ➔ 32 , 53 ) c A udyssey indicators ( ➔ 25 , 45 ) d T uning in dicators ( ➔ 28 ) e RDS indicator (excluding North American models) ( ➔ 29 ) f SLEEP indi cator ( ➔ 24 ) g MUTING indicator ( ➔ 24 ) h Message ar e[...]

10 En North American and T aiwan models Europ ean, A ustralian and Asi an models a DIGIT AL IN CO AXIAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c HDMI IN and OUT jacks d PC IN jack e FM ANTENNA jack and AM ANTENNA termi nal f MONIT OR OUT V jack g UNIVERSAL PORT jack h SPEAKERS terminals ( CENTER , FRONT , SURR , SURR BA CK OR FRONT HI[...]

11 En Remote Contr oller *1 VIDEO functions as a short cut of HOME . For detail ed information, see the pages in parent heses. a ON/ST ANDBY button ( ➔ 22 ) b REMO TE MODE / INPUT SELECT OR bu tt on s ( ➔ 23 ) c SP LA Y OUT button ( ➔ 24 ) d Arr ow q / w / e / r and ENTER buttons e SETUP butto n ( ➔ 38 ) f LISTENING MODE b uttons ( ➔ 32 )[...]

12 En About Home Theater Thanks to the A V receiv er’ s superb capabilities, you can enjoy surround sound wi th a real sense of movement in your ow n home—just like being in a movie thea ter or concert hall. W ith Blu-ray Discs, you can enj oy DTS and Dolby Digital. W ith analog or digital TV , you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or O[...]

13 En Connecting the A V Receiver Speaker Configura tion The follo wing table indicates the channels you should use depending on the number of speakers that you ha ve. For 7.1-channel surround-sound playback, you need se ven speakers and a po wered subwoofer . *1 If you’ re using only one surro und back speaker , connect it to the SURR B A CK OR [...]

14 En • Don’t connect mo re than one cable to each speak e r terminal. Doing so may damage the A V receiver. • Don’t connect one speaker to se veral terminals. Connecting the Speaker Cab les Screw-type speak er terminals Using Banana Plugs (North American models) • If you are using b anana plugs, tighten the sp eaker terminal before inser[...]

15 En Using Dipole Spea kers Y ou can use dipole speakers for the sur round and surround back speakers. Dipole speakers output the same sound in tw o directions. Dipole speakers typically ha ve an arro w printed on them to indicate how the y should be positioned. The surround dipole speakers should be positioned so that their arro ws point tow ard [...]

16 En Connected image with A V components • Before making any A V connections, read the manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve co mpleted and double-checke d all A V connections. • Push plugs in all the way to ma ke good connections (loo se connections can cause noise or malfunc- tions). ?[...]

17 En Connect your components to the appropriate jacks. The default input assignments are sho wn below . ✔ : Assignment can be changed ( ➔ 39 ). Refer to “ About HDMI” ( ➔ 72 ) and “Using an RIHD-compatibl e TV , Player , or Recorder” ( ➔ 73 ). Tip T o listen to audio rec eiv ed by the HDMI IN jacks through your TV’ s speakers: ?[...]

18 En Connect your components to the appropr iate jack s. The default input assi gnments are sho wn below . ✔ : Assignment can be changed ( ➔ 40 ). Connecting External Components The on-screen setup menus appear only on a TV that is connecte d to the HDMI OUT . If your TV is connected to the MONIT OR OUT V or the COMPONENT VIDEO OUT , use the A[...]

19 En Note • When you connect to both A UX INPUT A UDIO jacks and A UX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be gi ven a higher priority . • The A V receiv er can output audio and video signals from the AU X I N P U T jacks to the VCR/DVR OUT jacks. *1 Connect a turntable (MM) that has a pho no preamp built-in. If you[...]

20 En W ith u (Remote Interacti ve), you can use the follo wing special functions: ■ System On/A uto P ower On When you start playback on a component connected via u while the A V recei ver is on Standb y , the A V recei ver will au tomatically turn on and select that com- ponent as the input source. ■ Direct Change When playback is started on [...]

21 En The A V recei ver supports se veral conn ection formats for comp atibilit y with a wide range of A V equipment. The format you choose will depend on the fo rmats supported by your components. Use the follo wing sections as a guide. Video Connection For mats V ideo component can be connected by using an y one of the following video c onnection[...]

22 En T urning On/Off the A V Receiver T urning On Press ON/ST ANDBY on the fr ont panel. or Press RECEIVER followed by ON/ST ANDBY on the remote co ntroller . The A V rece iv er comes on, the display lights, and the ST ANDBY indicator goes of f. T urning Off Press ON/ST ANDBY on the front panel or the r emote controller . The A V receiv er will en[...]

23 En Basic Operations Y ou can determine the language used for the onscreen setup menus. See “OSD Setup” ( ➔ 50 ). ■ Operating on the A V receiver ■ Operating with the remo te controller Y ou can display v arious info rmation about the current input source as follows. (Components connected to the UNIVERSAL PORT jack are ex cluded.) Tip ?[...]

24 En Y ou can temporarily mute the output of the A V receiv er. Tip • T o unmute, press MUTING again or adjust the volume. • The Mute functi on is cancelled when the A V rece i ver is set to Standb y . W ith the sleep timer , you can set the A V receiv er to turn off aut omatically after a specif ied period. Tip • If you need to cancel the s[...]

25 En Note *1 If Pure Audio ( Eur opean , Australian and Asian ) o r Direct listening mode is selected, “ Dynamic EQ ” and “ Dynamic V olume ” cannot be selected. *2 Only when you have selected “ Custom ” in the “ Picture Mode ” ( ➔ 48 ), pres sing ENTER allows you to adjust the fol- lowing items via the Home menu; “ Brightness [...]

26 En Using A udysse y 2EQ ® T o create a listening en vi ronment in your home theater that all listeners will enjo y , Audyssey 2EQ ta kes measure- ments at up to three positions within the listening area. Position the microphone at ear height of a seated listener with the microphone tip pointed directly at the ceiling using a tripod. Do not hold[...]

27 En Note • When Audy ssey 2EQ Room Correction and Spea ker Setup is complete, the “ Equalizer ” will be set to “ A udyssey ” ( ➔ 42 ). The A udyssey indica tor will light ( ➔ 9 ). • Y ou can cancel Audyssey 2EQ Room Correction and Speaker Setup at any point in this procedur e simply by disconnecting the setup microphone. • Do no[...]

28 En Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can store your fa vo rite stations as presets for quick selection. This model changes FM/AM frequenc y in 200/10kHz (or 50/9kHz) steps. Listening to the Radio T uning into Radio Stations ■ A uto tuning mode When tuned into a station, the TUNED indic[...]

29 En Y ou can store a combination of up to 40 of your fav orite FM/AM radio stations as presets. Note • Y ou can name your radio presets for easy identification ( ➔ 47 ). Its name is displayed instead of the band and frequenc y . Selecting Pre sets Tip • Y ou can also use the remote controller’ s number b uttons to select a preset directly[...]

30 En Finding Stations by T ype (PTY) Y ou can search for radio stations by ty pe. Listening to T raffic Ne ws (TP) Y ou can search for stations that broadcast traf fic ne ws. ■ RDS program types (PTY) 1 Press R T/PTY/TP twice. The current program type appears on the display . 2 Use PRESET e / r to select the type of program yo u want. See the ta[...]

31 En Recor ding This section explains ho w to record the selected input source to a component with recording capa bility , and how to record audio and video from different sources. Connecting a Recor ding Component Note • The A V receiv er must be turned on for recording. Record ing is not possible while it’ s in Standby mode. • If you want [...]

32 En Using the Listening Modes See “ About Listening Modes” for detailed information about the listening mod es ( ➔ 33 ). Listening Mode Buttons MO VIE/TV b utton This butto n selects the listening modes intended for use with movies and TV . MUSIC button This butto n selects the listening modes intended for use with music. GAME button This b[...]

33 En The A V recei ver’ s listening modes can tr ansform your listening room into a movie theater or concert ha ll, with high f idel- ity and stunning surround sound. Explanatory Notes ■ Input Source The follow ing audio formats are supported by the listening mode. ■ Speaker Lay out The illustration sho ws which speakers are acti v ated in e[...]

34 En Listening Modes Listening Mode Description Input Source Speaker Lay out Pure A udio *1 In this mode, the display and video circuitry are turned of f, minimizing pos- sible noise sources for th e ultimate in high-fidelity audio reproduction. (As the video circuitry is turned off, only video signals input through HDMI IN can be output from HDMI[...]

35 En DTS-HD High Resolution Audio (Continued from the previo us page.) D XCN F XCN * 2 DTS-HD Master Au di o D XCN F XCN * 2 DTS Express S D XCN DSD *7 D XCN DTS 96/24 *8 This mode is for use with DTS 96/2 4 sources. Th is is high-resolu tion DTS with a 96 kHz sampli ng rate and 24-b it resolution, providing superior fidel- ity . Use it with D VDs[...]

36 En Listening Mode Description Input Source Speaker Lay out THX Found ed by George Lucas, THX de velops string ent standards that ensure movies are reproduced in movie theater s and home theaters just as the direc- tor intended. THX Modes carefully optim ize the tonal and spatial character- istics of the soundtrack for reproductio n in the home-t[...]

37 En Onkyo-Original DSP Listening Modes Note *1 (North American and T aiwan models) This listening mode is not available. *2 When the input source contains the encoded front high or fr ont wide channel, the corresponding speakers output the soun d. *3 If there are no surroun d back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is u[...]

38 En Ad vanced Setup The on-screen setup menus appear on the connected TV and provide a con venient w ay to change the A V recei ver’ s vario us settings. Settings ar e organized into nine catego- ries on the main menu . Carry out the settings b y using the on-screen display . Note • This procedure can also be performed on the A V receiver b y[...]

39 En Explanatory Notes Main Menu Input/Output Assign Monitor Out Y ou can specify the output resolution for the HDMI OUT and COMPONENT VIDEO MONITOR OUT and ha ve the A V receiv er upcon vert t he picture resolution as nece s- sary to match the resolution supported b y your TV . ■ Resolution ` Through : Select this to pass video through the A V [...]

40 En Component Video Input If you connect a video component to a component video input, you must assign that input to an input selector . For example, if you connect your Blu-ray Disc/D VD player to COMPONENT VIDEO IN 2 , you must assign “ IN2 ” to the “ BD/D VD ” input selecto r . Here are the defau lt assignments. ■ BD/D VD , VCR/DVR ,[...]

41 En ■ Speakers T ype ` Normal : Select this if you’ ve conne cted your front speakers normally . ` Bi-Amp : Select this if you’ ve bi-amped your front speak ers. Note • Powered Zone 2 cannot be used if “ Speakers T ype ” is set to “ Bi-Amp ” ( ➔ 56 ). ■ Speaker T erminal Assign Front High/Front Wide/Zone2 W ith this setting, y[...]

42 En ■ LPF of LFE (Low-P ass Filter f o r the LFE Channel) ` 80Hz , 90Hz , 100Hz , 120Hz W ith this setting, you can specify the cutof f frequency of the LFE channel’ s lo w-pa ss filter (LPF), whic h can be used to filter out unwanted hum. The LPF only applies to sources that use the LFE channel. Note • If you’ re using THX-certif ied spe[...]

43 En ` A udyssey : This is selected automatic ally by Audysse y 2EQ ® Room Correction and Speaker Setup function. The A udyssey Dynamic V olume indicator will light ( ➔ 9 ) and “ Dynamic EQ ” and “ Dynamic V olume ” become av ailable ( ➔ 45 ). ` Off : No Audyssey 2EQ equalizing will apply . Note • Y ou can select: “ 63Hz ”, “ [...]

44 En Main menu Audio Adjust W ith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. Multiple x/Mono ■ Multiplex This setting dete rmines which channel of a stereo multi- plex source is ou tput. Use it to select audio channels or languages with multiplex sour ces, mu ltilingual TV broadcasts, and s[...]

45 En Note •I f t h e “ Surr Back ” setting is set to “ None ” ( ➔ 41 ), this setting cannot be selected. •I f t h e “ Front High ” or “ Front Wide ” setting is enabled ( ➔ 41 ), this setting is fixed at “ Manual ”. DTS ■ Neo:6 Musi c Center Im age ` 0 to 2 to 5 The DTS Neo:6 Music listeni ng mode creates 6-channel sur[...]

46 En ■ Reference Level A udyssey Dynamic EQ™ Reference Level Offset ` 0dB : It should be used when listening to movies. ` 5dB : Select this setting for cont ent that has a v ery wide dynamic range, such as classica l music. ` 10dB : Select this setting for jazz or other music that has a wider dynamic range. This setting should also be selected[...]

47 En IntelliV olume ■ IntelliV olume ` –12dB to 0dB to +12dB in 1 dB steps. W ith IntelliV olume, you can set the input le vel for each input selector individually . This is useful if one of your source components is louder or quieter than the others. Use e / r to set the lev el. If a component is noticeably louder than the others, use e to re[...]

48 En Picture Adjust Using Picture Adjust, you can adjust the picture quality and reduce any noi se appearing on the scree n. T o view the TV picture while setting, press ENTER . T o return to the pre vious screen, press RETURN . Note • If you are using the analog RGB input, the following settings are not av ailable: “ Film Mode ”, “ Edge E[...]

49 En ■ Film Mode *2 ` Vi d e o : Does not process in either “ 3:2 ” or “ 2:2 ”. ` Au t o : Adjusts to the picture source, automatically selecting “ Picture Mode ”. ` 3:2 : Selected wh en the picture source is movie f ilm, etc. ` 2:2 : Selected when the picture source is computer graph- ics, animation, etc. The A V recei ver will a dj[...]

50 En ■ Dolby D/ Dolby D +/T rueHD W ith this setting, you can spec ify the listen ing mode to be used when a Dolb y Digital or Dolby Digital Plus for- mat digital au dio signal is pla yed (D VD, etc.). Spe cifies the defa ult listeni ng mode for Dolb y TrueHD sources, such as Blu-ray or HD D VD (input via HDMI). ■ DTS/DTS-ES/DTS-HD W ith this [...]

51 En Changing the Remote Controller’ s ID TUNER For FM/AM tuning to w ork properly , you must specify the FM/AM frequency step used in your area. Note that when this setting is change d, all radio presets will be deleted. ■ FM/AM Frequency Step (Nor th American and T aiwan models) ` 200k/10kHz : Select if 200 k/10 kHz steps are used in your ar[...]

52 En ■ A udio Return Channel ` Off : Select “ Off ” if you don’t want to use audio return channel (ARC) function. ` Au t o : The audio signal from your TV tuner can be sent to the HDMI OUT of the A V re ceiv er. Audio return channel (ARC) function enables an HDMI 1.4 capable TV to send the audio stream to the HDMI OUT of the A V receiv er.[...]

53 En Note • T o b ypass the bass and treble tone circuits, select the Direct, Pure Audio (European, A ustralian and Asian models) or TH X lis- tening mode. • Alternatively , you can use the A V recei ver’ s TO N E and TO N E LEVEL + / – ( ➔ 54 ). Speaker Levels Y ou can adjust the v olume of each speaker while liste ning to an input sour[...]

54 En A udio Selector Y ou can set priorities of audio output when there are both digital and analog inputs. ■ A udio Selector ` ARC : The audio signal from your TV tuner can be sent to the HDMI OUT of the A V re ceiv er. *1 W ith this selection the TV’ s audio can be automati- cally selected as a priori ty among other assignments. ` HDMI : Thi[...]

55 En Zone 2 In addition to your main listeni ng room, you can also enjoy playback in the othe r room, or as we call Zone 2. And, you can select a different source for each room. There are two ways you can connect Zone 2 speakers: 1. Connect them directly to the A V recei ver. 2. Connect them to an amp in Zone 2. Connecting Y our Zone 2 Speakers Di[...]

56 En If you’ v e connected your Zone 2 speake rs to the A V receiv er, as explained in “C onnecting Y our Zone 2 Speak- ers Directly to the A V receiver” ( ➔ 55 ), you must set the “ Front High / Fr ont Wide / Zone2 ” setting to “ Zone2 ”. Menu Speaker Setup Note • When “ Zone2 ” is selected and Zone 2 turned on, the Zone 2 s[...]

57 En Contr olling Zone 2 with the Remote Contr oller Note • T o control Zone 2, you must press the remote controller’ s ZONE2 first . Adjusting the V olume for Zone 2 ■ Operating with the remote controller ■ Operating on the A V receiver If your Zone 2 speakers are connected to a recei ver or inte- grated amp in Zone 2, use its volume cont[...]

58 En Contr olling iP od Models sold are different depending on the re gion. Connecting an Onky o Doc k B A *1 C No. Onkyo Dock Cable Note Pa g e A UP-A1 Dock (Uni versal Port Option Dock) — • When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases. • Y ou can control your iPod when “ PORT ”[...]

59 En UP-A1 Dock W ith the UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the A V receiv er and enjoy great sound. Y ou can use the A V receiver’ s remote controller to operate your iPod. ■ Basic Operation Au t o P o w e r O n If you start iPod playback while the A V receiv er is on Standby , the A [...]

60 En RI Dock W ith the RI Dock, you can easily play the music stored on your Apple iPod through the A V receiver and enjoy great sound, and watch iPod slidesho ws and videos on your TV . In addition, the onscreen display (OSD) allows you to view , navigate, and select your iPod’ s contents on your TV , and with the supplied remote controller, yo[...]

61 En ✔ : A vailable b uttons • With some iPod models, generations and RI Docks, certain buttons may not work as expected. • For detailed operation of the iPod, please r e fer to the instruction ma nual of RI Dock. *1 This button do es not turn the Onkyo DS-A2 or DS-A2X RI Dock on or of f. Y our iPod may not respond the f irst time you press [...]

62 En Contr olling Other Components Y ou can use the A V receiver’ s remote controller (RC-765M) to control your o ther A V components, includ- ing those made by other ma nufacturers. This section explains ho w to enter the re mote control code (with the default underlined) for a component that you want to con- trol: D VD, TV , CD, etc. The follo[...]

63 En Y ou’ll need to enter a code for each component that you want to control. Note • The remo te control code s provid ed are correct at the time of printing, but are subject to change. Onkyo components that are connected via u are con- trolled by pointing the remote controller at the A V receiv er, not the component. Th is allows you to cont[...]

64 En Yo u c a n r e s e t a REMOT E MODE to its default remote control code. Y ou can rese t the remote controller to its default sett ings. By pressing REMO TE MODE that’ s been progr ammed with the remote control c ode for your component, you can control your component as below . For details on entering a remo te control code for other compone[...]

65 En Note • With some components, certain buttons may no t work as expected, and some may not work at all. ✔ : A vailable b uttons *1 The p function is not supp orted. The p sup- ported by the A V receiver is the CEC system control function of the HDMI standard. *2 These buttons function as colored buttons or A, B, C, D but- tons. *3 3 (Pause)[...]

66 En T roub leshooting If you ha ve an y trouble using the A V receiv er, look for a solution in this section. If you can’t resolv e the issue your- self, contact your Onkyo dealer . ■ Can’t turn on the A V receiver ■ The ST ANDBY indicator flashes r ed ■ There’ s no sound, or it’ s ver y quiet If you can’t resolv e the issue yours[...]

67 En ■ Only the fr ont speakers produce sound ■ Only the center speaker produces sound ■ The surround speakers pr oduce no sound ■ The center speaker pr oduces no sound ■ The fr ont high, fr ont wide and surr ound back speakers pr oduce no sound ■ The subwoofer produces no sound ■ There’ s no sound with a certain signal format ■ [...]

68 En ■ The beginning of audio received b y an HDMI IN can’t be heard ■ There’ s no picture ■ There’ s no picture from a source conn ected to an HDMI IN ■ The on-screen menus don’t appear ■ The picture is distorte d ■ The on screen display does not appear ■ Reception is noisy , FM stereo reception is noisy , or the FM STEREO i[...]

69 En ■ There’ s no sound ■ There’ s no video ■ The A V re ceiver’ s remote controller doesn’t contr ol you r iP od ■ The A V receiver unexpected ly selects your iP od as the input source ■ Can’t record ■ There’ s no sound ■ The Zone 2 speakers produce no sound ■ The sound chang es wh en I connect my headphones ■ The s[...]

70 En ■ The functions System O n/Auto P ower On and Direct Change don’t work for components connected via u ■ When performing “A udyssey 2EQ ® Room Correction and Speaker Setup”, the measurement fails showing the message “Ambient noise is too high.”. ■ The foll owing settings can be made f or the composite video inputs Y ou must us[...]

71 En Specifications Amplifier Section Video Section T uner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Others Specif ications and features are subject to change without notice. Rated Ou tput P ower All chan nels: (North American) 100 watts minimum cont inuous power per channel , 8 ohm loads,[...]

72 En About HDMI Designed to meet the inc reased demands of digital TV , HDMI (High Definition Mu ltimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/D VD players, set-top boxes, and other video compo- nents. Until now , sev eral sepa rate video and audio ca bles ha ve been required to conne ct A V c[...]

73 En Using an RIHD-compatible TV , Play er , or Recorder p , which stands for Remote Interacti ve ov er HDMI, is the name of the system control function found on Onkyo components. The A V recei ver can be used with CEC (Consumer Electronics Control), which allo ws system control ov er HDMI and is part of the HDMI standard. CEC provides interoperab[...]

74 En ■ How to co nnect and setup 1 Conf irm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI in put jack of the TV . 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the A V receiv er using an optical digita l cable. Note • When the audio return channel (ARC) function is used with TV for HDMI 1.4, it shou[...]

75 En Video Resolution Char t The follow ing tables show ho w video signals at di fferent resolutions are output by the A V receiv er. NTSC/P AL ✔ : Output *1 A vailable resolution: [640 × 480 60/67/73/75 Hz], [800 × 600 56/60/7 2/75 Hz], [1024 × 768 60/70/75 Hz], [1152 × 864 75 Hz], [1152 × 870 75 Hz], [1280 × 720 60/75 Hz], [1280 × 768 6[...]

SN 29400239 Y1002-1 (C) Copyright 2010 ONKY O CORPORA TION Japan. All rights reser ved. * 2 9 4 0 0 2 3 9 * Sales & Product Planning Div . : 2-1, Nisshin-cho, Ne yaga wa-shi, OSAKA 572-8540, JAP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U .S.A. CORPORA TION 18 P ark Wa y , Upper Saddle River , N.J . 07458, U .S.A. T el: 800-229-1687, 201-[...]