Panasonic CF-VDW07M manuale d’uso

CF-VDW07M & CF-VDW07HM Windows 2000 and Windows XP C ONFIGURATION M ANUAL W IRELESS D ISPLAY[...]

Panasonic Wireless Display Configuration Manual I NTRODUCTION Tha nk you for purcha sing the Pa na sonic T oughbook CF-V D W07 series Wireless Display . Y ou are just steps away from the freedom of mobility a nd the power of staying in touch. With Pa na sonic's T oughbook Wireless Display , you ca n enjoy the consta nt connectivity to your la [...]

Panasonic Wireless Display Configuration Manual Illustrations in this Manual: NOTE : The Note icon points out items of interest or importance. CAUTION : The Caution icon warns you about problems should be watched out for or precautions should be taken. WARNING : The Warning icon indicates the existence of a hazard that could result in damage to equ[...]

Panasonic Wireless Display Configuration Manual This manual will walk you through the configurations of the Wireless Display with your computer. In the package, please find the following items as shown in the figure below. If any of these items is missing or not working properly, please contact Panasonic Technical Support. First-time Operation 1 De[...]

Panasonic Wireless Display Configuration Manual I I I I I I I I I I I I I I I In stall the Seri al Port Driver of the W irele ss Display: Windows 2000 1. Select [Start] - [Setting] - [Control Pa nel] - [Add/Remove Hardware], then select [Next]. 2. Select [Add/Troubleshoot a device], then select [Next]. 3. Select [Add a new device], then select [Nex[...]

Panasonic Wireless Display Configuration Manual 3 AdHoc Mode Configuration 1. Insert the battery into the Wireless Display , connect the Wireless Display to a power outlet, and turn on the Wire- less Display. 2. For a Wireless Display that has never been configured before, the following screen will appear on the display. If a different screen appea[...]

Panasonic Wireless Display Configuration Manual 4. Select [Option] using the stylus. The screen shown here will be displayed. 5. Select [Setup]. The screen shown here will be displayed. Wirele ss Display can save up to four profiles. [Profile 1] is used in this ma nual. Select [Profile 1]. Hit [OK]. 4 6. Select [AcHoc]. The screen shown here will b[...]

Panasonic Wireless Display Configuration Manual AdHoc Mode Configuration I I I I I I I I I I Cre ate a Prof ile f or the 802.1 1b Network Ada pter: 5 NOTE Depending on the bra nd of network card you use, the utility will a ppear differently . Throughout this ma nual, the configuration utility , Client Ma nager from Orinoco Wireless, is used a s a n[...]

Panasonic Wireless Display Configuration Manual 6 8. First, create a profile that will be used for commu- nicating with the Wirele ss Display . Select [Actions] - [Add/Edit Configuration Profile]. The following win- dow is displayed. 9. Click [Add]. The following window is displayed. Create a na me for this profile in the "Prof ile Na me"[...]

Panasonic Wireless Display Configuration Manual AdHoc Mode Configuration 15. Click [OK] - [OK] - [Close]. Plea se ma ke sure to exit out of the "Local Area Connection x " window so that settings ta ke ef fect i mmedi- ately . 14. Select "Specify IP Address", a nd enter the IP Address a nd Subnet Ma sk a s shown on the Wireless D[...]

Panasonic Wireless Display Configuration Manual 17. Highlight [Internet Protocol (TCP/IP)], a nd then click [Properties]. 18. Select "Use the following IP address:". Enter the IP Address a nd Subnet Ma sk a s shown on the Wirele ss Display . [ P .4-(6)] 19. Click [OK] - [OK] to exit out of the setting window . This screen is a sample. 8 P[...]

Panasonic Wireless Display Configuration Manual 22. The setting is completed. Select [Connect] on the W ireless Display . The display will attempt to esta blish connection with the computer . If the connection is success ful, the MeiW DS icon in the "System T ray" will cha nge from to . The Wireless display ca n not connect to the compute[...]

Panasonic Wireless Display Configuration Manual Setting up the Wirele ss Display f or Infra structure Mode Method 1 Setup Infrastructure Directly: By default under Infrastructure Mode, the Wireless Display will attempt to communicate with an access point having the SSID of "cfvdw07" and WEP encryption disabled. If you have an access point[...]

Panasonic Wireless Display Configuration Manual I I I I I Setup the W irele ss Display in AdHoc Mode: 1. Follow the instructions on pages 3 through 8 on how to setup the display in AdHoc mode. I I I I I I I I I I M atch the Display's Settings with the Acce ss Point: I V I V I V I V I V Re a dy to Conne ct: 7. The Wirele ss Display is now ready[...]

Panasonic Wireless Display Configuration Manual 3. Click [Start] - [Progra ms] - [Pa na sonic] - [W ireless Display Setup Utility] to launch the "Wireless Display Setup Utility". The f ollowing window will a ppear a nd prompt for pa ssword. This screen is a sample. 2. Select [Connect] on the Wirele ss Display . The display will attempt to[...]

Panasonic Wireless Display Configuration Manual 5. A Enter the SSID of your Access Point. B Cha nge the network type to [Infra structure]. C Enter the PC IP addre ss, Display IP address, a nd Subnet ma sk. [ P .12-(4)] D Enable the WEP to [64 bits]. (If your Access Point does not uses WEP or use 128 bits encryption, cha nge the "WEP" to [[...]

Panasonic Wireless Display Configuration Manual 6. Click [Next] - [OK] - [Next] - [OK] - [Finish] to exit out of the "Wireless Display Setup Utility". 8. The Wireless Display is now updated with the new settings. Restart the Wireless Display , press the MENU button on the display , then select [Wireless]. The current settings of the Wirel[...]

Panasonic Wireless Display Configuration Manual Infrastructure Mode Configuration 15 12. Click [Next]. The following window is displayed. Check "Ena ble Data Security ," a nd enter the Access Point's WEP key . 13. Click [Next] - [Finish] to exit out of the profile setting. Plea se make sure to exit out of the network ada pter configu[...]

Panasonic Wireless Display Configuration Manual Using the Me iW DS Setup Utility U nlike the "Wirele ss Display Setup Utility", which is used to modify the settings of the Wireless Display , the "Me iW DS Setup Utility" is used to modify the settings on the host computer side. Different from the "Wireless Display Setup Util[...]

Panasonic Wireless Display Configuration Manual B T o cha nge the Me iW DS Setup Utility Pa ssword: 1. The default supervisor pa ssword for the "MeiW DS Setup Utility" is "supervisor". T o cha nge the pa ssword, click the [Cha nge Supervisor Pa ssword] button. The follow- ing window will a ppear . 2. Enter the current pa ssword [...]

Panasonic Wireless Display Configuration Manual a1. In AdHoc mode, the default SSID of the Wireless Display is "cfvdw07-xxxx." T o cha nge the display's SSID, enter the new SSID at A 1 , fo r exa mple "T oughbook-07". Click [Next] - [OK] - [Next] - [OK] - [Finish]. Launch the "Wireless Display Setup Utility". The [...]

Panasonic Wireless Display Configuration Manual b2. The Wireless Display 's TCP/IP address is cha nged to the new TCP/IP address a s shown in "Display's IP a ddress" at B 1 , a nd it only communicates to a computer with the new TCP/IP a ddress a s shown in the "PC's IP address". The user must cha nge the wireless [...]

Panasonic Wireless Display Configuration Manual e2. Check to see if the Wireles s Display's profile n a me ha s been updated. On the Wirele ss Display , press the MENU button. The screen a s shown below will be displayed. The "Profile:" n a me should have been updated with the new na me. General Wireless Battery Option Version Mode :[...]

Panasonic Wireless Display Configuration Manual 21 Using the Software Keyboard In order to use the Software Keyboard, the Wireless Display must be connected to the computer . Y ou ca nnot launch Software Keyboard if the Wireless Display is not connected to the computer . The connection with the Wireless Display will trigger the Software Keyboard. B[...]

Panasonic Wireless Display Configuration Manual 22 [T ra n sparent] This will set the keyboard's appearance to transparent, similar to the picture on right hand side.[...]

Panasonic Wireless Display Configuration Manual U nin stalling the Software I I I I I Uninstalling the Software Keyboard: 1. Close the software keyboard. 2. Select [Start] - [Settings] - [Control Pa nel] - [Add/Remove Progra ms]. Select [Soft- ware Keyboard] - [Add/Remove]. Follow the on-screen instructions. If [Locked File Detected] is displayed, [...]

Panasonic Wireless Display Configuration Manual Usage Precautions Do not maximize the MS-DOS screen. Once maximized, the connection with the Wireless Display is interrupted and the screen cannot be returned to its original size. In this case, press [ Alt ] + [ Enter ] on the computer . If a computer establishes a connection with the Wireless Displa[...]

Panasonic Wireless Display Configuration Manual LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC ® PRODUCT ("PRODUCT") ARE LICENSED ONLY TO THE END-USER ("YOU"), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SH[...]

Panasonic Wireless Display Configuration Manual YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELEC- TRONICALLY TRACE THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART. YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE. IF YOU [...]

Matsushita Electric Industrial Co., LTD. All Rights Reserved.[...]