Philips CarStudio CE233 manuale d’uso

Register your pr oduct and get support at www .philips.com/support Alwa ys there to help y ou CE233 User man ual Ques tion? Cont ac t Philips[...]

[...]

1 EN Contents 1 Safety 2 2 Y our car audio system 3 Introduction 3 What's in the box 3 Over view of the system 4 3 Install the car audio system 7 Connect wires 7 Mount into the dashboard 8 Attach the front panel 9 4 Get started 10 For the r st time use 10 Set the time format 10 Set the clock 10 Select a source 10 Select a listening zone 10 [...]

2 EN 1 Safety Read and under stand all instr uctions before you use this device . If damage is caused by failure to follow instructions, the war r anty does not apply . • Modication of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (ear th) 12 V DC operation only[...]

3 EN 2 Y our car audio system Congratulations on your purchase , and welcome to Philips! T o fully benet from the suppor t that Philips offer s, register your product at www .philips.com/welcome . Intr oduction With this system, y ou can: • enjoy audio from USB storage devices, SD card, SDHC card, and other external play er s, and • listen t[...]

4 EN Ov er vie w of the system a • Unlock the front panel. b • Return to the previous menu. c • For .mp3 tracks, press to select the previous folder . • In radio mode , press to select a tuner band. • Press and hold to activate the selection of listening zones. d LCD screen ab cd e ts rq po nm lk ji hf g x u v w e AUDIO IN • Connect to [...]

5 EN i • Star t, pause , or resume the play of tracks. • In radio mode , press to select the preset radio station of No. 6. • In radio mode , press and hold to store the current r adio station at channel No. 6. j • In radio mode , press to select the preset radio station of No. 5. • In radio mode , press and hold to store the current r ad[...]

6 EN u BAND • Press repeatedly to select a tuner band. v MENU • Press to access the system menu. w • Inser t an SD/SDHC card. x RESET • Press to reset the system to factor y default settings.[...]

7 EN 3 Install the car audio system Caution • Use the controls only as stated in this user manual. Always f ollow the instr uctions in this chapter in sequence . These instr uctions are for a typical installation. How ever , if your car has diff erent requirements, make the adjustment accordingly . If you ha ve any question regarding installation[...]

8 EN 2 Connect the antenna and amplier as illustrated, if applicable . Sockets on rear panel External sockets or connector s 1 For ISO male connector s As indicated abov e 2 REAR L Rear left speaker 3 REAR R Rear right speaker 4 ANTENNA Antenna 5 Pur ple str ip OE remote control module Tip • The pin arr angement for the ISO connector s depends[...]

9 EN 4 Slide the unit into the sleeve until y ou hear a "click". 5 Attach the trim plate . 6 Reconnect the negative terminal of the car batter y . Attach the fr ont panel 1 Inser t the notch on the front panel to the chassis on the main unit. 2 Press the left end of the front panel inwards until it is securely locked with a "click&qu[...]

10 EN 4 Get star ted For the rst time use 1 Press to tur n on the system. » [PHILIPS] is display ed and then [SELECT OPERA TING REGION] (select a radio region) scrolls. 2 When one of the following options is display ed, rotate to select a radio region that matches your location. • [AREA EUR OPE] (W estern Europe) • [AREA ASIA] (Asia Paci[...]

11 EN Mute the button beep The beep sound of buttons is enabled b y default. 1 Press MENU to access the system menu. 2 Press / repeatedly until [BEEP ON] or [BEEP OFF] is display ed. • [BEEP ON] : Enable the beep sound of buttons. • [BEEP OFF] : Mute the beep sound of buttons. 3 Rotate to change the setting. 5 Listen to radio Switch to radio mo[...]

12 EN • [LOC OFF] : Search for radio stations with strong and weak signals. Sear ch for a radio station Sear ch for a radio station automatically Press or to search for the previous or next radio station with strong signals. Sear ch for a radio station manually 1 Press and hold or until [M] blinks. 2 Press or repeatedly until the tar get frequenc[...]

13 EN 3 Press to access the list of program types. 4 Rotate to select a program type , and then press to conrm. Item Program type Description 1 NEWS News ser vices 2 AFF AIRS P olitics and current affair s 3 INFO Special information programs 4 SPOR T Spor ts 5 EDUCA TE Education and advanced training 6 DRAMA Radio plays and literature 7 CUL TURE[...]

14 EN Synchr onize the system clock Y ou can synchronize the system clock with an RDS station that transmits time signals. 1 Press MENU to access the system menu. 2 Press / repeatedly until [CT ON] or [CT OFF] is display ed. 3 Rotate to select a setting. • [CT ON] : Synchronize the system clock with the RDS station automatically . • [CT OFF] : [...]

15 EN 2 Press AS / SOURCE repeatedly to switch the source . • [USB] : For a USB storage device that is connected to the USB socket on the front panel • [SD/SDHC] : For an SD/SDHC card that is inser ted into the slot 3 If the play does not star t, press . Contr ol pla y Button Function / Press repeatedly to select a folder . Pause or resume pla [...]

16 EN 7 Listen to an external pla yer Y ou can use the system to amplify the audio input from an external player , for example , MP3 play er . 1 Press AS / SOURCE repeatedly to switch the source to [AUDIO IN] . 2 Connect an audio input cable with a 3.5 mm connector on both ends between • the AUDIO IN sock et on the front panel, and • the audio [...]

17 EN 9 Additional information Charge y our USB device Y ou can char ge your USB device, for example , smar t phone , with this product. Note • The output voltage through the USB socket is 5 V with output current 1.0 A. Connect your USB device to this product with USB cable. Once the USB device is connected and recognized, it begins to char ge au[...]

18 EN 10 Pr oduct information Note • Specications are subject to change without prior notice. General P ow er supply 12 V DC (11 V - 16 V), negative ground Fuse 15 A Suitable speaker impedance 4 - 8 Maximum po wer output 50 W x 4 Continuous pow er output 22 W x 4 RMS (4 10% T .H.D .) Pre-Amp output voltage 2.5 V Aux-in level 500 mV Dimensions [...]

19 EN 12 Notice Any changes or modications made to this device that are not expressly appro ved by Gibson Innovations ma y void the user’ s authority to oper ate the equipment. Car e of the envir onment Disposal of your old pr oduct Y our product is designed and manufactured with high quality materials and components, which can be recycled and[...]

2015 © Gibson Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are r egistered trademarks of K oninklijke Philips N.V . and are used by Gibson Innovations Limited under license fr om K oninklijke Philips N.V . CE233_12_UM_Online_V1.0[...]