Philips DVD700/004 manuale d’uso

INTRODUCTION ..................................................................P 5 INST ALLA TION ....................................................................P 7 ST ANDARD CONNECTIONS ................................................P 9 GETTING ST ARTED ..............................................................P 11 PLA YING A DVD-VIDEO D[...]

6 english Y our Philips DVD-Video player plays digital video discs con- forming to the universal DVD-Video standard. With it, you will be able to enjoy full-length movies with true cinema picture quality , and stereo or multichannel sound (depending on the disc, and on your playback set-up). The unique features of DVD-Video, such as selection of so[...]

1 ON/OFF 2 Disc tray 3 T ray OPEN/CLOSE 4 Display 5 REPEA T/chapter/track/title/disc 6 O PREVious title/chapter/track 7 P NEXT title/chapter/track 8 9 STOP 9 ; PAUSE/Still/Step 0 2 PLA Y FRONT OF PLA YER english 7 INST ALLA TION 20 18 16 14 12 10 8 642 19 17 15 13 11 9 7 5 3 1 21 1 2 3 4 5 6 7 TITLE PAUSE TIME TOTAL REM 1 2 3 4 5 6 7 8 9 10 11 12 1[...]

1 Remote control active (flashing) 2 FTS (Favourite T rack Selection) active 3 SHUFFLE active 4 P AUSE active 5 SCAN active 6 A-B REPEA T/CHAPTER/TITLE/TRACK mode active 7 Chapter or track calendar 8 TOT AL/REMaining/TRACK TIME in hours, minutes and seconds 9 (V)CD disc inserted 0 DVD disc inserted ! DVD CHAPTER or VCD/CD TRACK number @ DVD TITLE n[...]

- Depending on your TV and other equipment, there are vari- ous ways you could connect the DVD-Video player. These are shown below. - Please refer to your TV, VCR, Stereo System and any other User Manual(s) as necessary to make the optimal connec- tions. Connection to a TV with an A/V Euroconnector socket. 1 Connect the A/V Euroconnector on the rea[...]

For multichannel sound, your player provides both digital and analog audio outputs. DIGIT AL (MPEG 2 MUL TICHANNEL OR DOLBY DIGIT AL™) MUL TICHANNEL SOUND 1 For this, which provides the highest multichannel sound quality , you need a digital multichannel A/V receiver . 2 Connect the digital audio output on the rear of the player to a suitable inp[...]

LOADING THE BA TTERIES 1 Open the battery compartment cover . 2 Insert two 'AAA' (R03) batteries as indicated inside the battery compartment. 3 Close the cover . CAUTION Do not mix old and new batteries. and NEVER mix dif- ferent types of batteries (standard, alkaline and so on). NOTE - Unless otherwise mentioned, all operations can be ca[...]

1 Press OPEN/CLOSE on the front of the player . The disc tray opens. 2 Lay your chosen disc in the tray , label side up. Make sure it is sitting properly in the correct recess. 3 Gently push the tray , or press OPEN/CLOSE, to close the tray . - With Autoplay on (the factory setting) play starts. - With Autoplay off, the (play) screen for the type o[...]

..........................................Audio language ..........................................Audio system ..........................................Remaining time of title ..........................................Elapsed time ..........................................Resume ..........................................T otal time PLA YING A TIT[...]

NOTE - If you forget your PIN code, you can erase it when the code is requested as above, by pressing 9 four times. Parental Control will then be de-activated. To re-activate it, see Activating Parental Control (p. 22). STILL PICTURE AND STEP FRAME • T o get a still picture, press ; during play . • T o step forward to the next picture frame, pr[...]

CHANGING THE AUDIO LANGUAGE AND CHANNEL CONFIGURA TION This changes the language and the audio channel configura- tion when alternatives are available on the disc. • Press AUDIO during play . ➜ The audio language and channel configuration icons appear on the screen for 2 seconds. • Press AUDIO repeatedly to step through the options. ➜ At ea[...]

Y ou will recognize Video CDs by the logo. Depending on the material on the disc (a movie, video clips, a drama series, etc.) it may have one or more tracks, and tracks may have one or more indexes, as indi- cated on the disc case. T o make access easy and convenient, your player lets you move between tracks, and between indexes. Some Video CDs hav[...]

NOTE - If the number has more than one digit, press the keys in rapid succession. PLA YBACK CONTROL (PBC) • Insert a Video CD with PBC and press 2 . ➜ The PBC menu appears on the TV screen. • Go through the menu with the keys indicated on the TV screen until your chosen passage starts to play . If a PBC menu consists of a list of titles, you [...]

• T o exit Repeat mode, press REPEA T a third time for about 1 second. A-B REPEA T T o repeat or loop a sequence: • Press A-B REPEA T briefly at your chosen starting point; ➜ A appears on the player display . • Press A-B REPEA T briefly again at your chosen end point; ➜ A - B appears on the display , and the repeat sequence begins. • T [...]

• T o repeat the entire disc, press REPEA T a second time for about 1 second; ➜ REPEA T appears on the display . • T o exit Repeat mode, press REPEA T a third time for about 1 second. A-B REPEA T T o repeat or loop a sequence: • Press A-B REPEA T briefly at your chosen starting point; ➜ A appears on the player display . • Press A-B REPE[...]

T o select T racks: 1 Insert a disc and go to Stop mode. 2 Press r . 3 Use l or r to move to the first track number you want to select. 4 Press b . 5 Repeat steps 3 and 4 to select further track numbers in the same way . If you change your mind, you can de-select track numbers in reverse order by pressing o as required. 6 T o clear your whole selec[...]

Factory setting 16:9 (wide screen). If you have a regular (4:3) TV , you can choose Letterbox for a ‘wide-screen’ picture with black bars top and bottom, or Pan Scan, for a full-height pic- ture with the sides trimmed. If a disc has Pan Scan, the pic- ture then moves (scans) horizontally to keep the main action on the screen. Factory setting ON[...]

ACTIV A TING PARENT AL CONTROL This can only be done in Stop mode 1 Press SETUP to obtain the Settings menu. 2 Move to Parental Control using ob . 3 Press l or r to change Parental Control to Active. 4 Y ou will be asked to enter a 4-digit pin code of your own choice, and then to confirm your choice. 5 This code must then be entered to play any DVD[...]

If it appears that the DVD-Video player is faulty , first consult this checklist. It may be that something simple has been over- looked. Under no circumstances attempt to repair the system yourself; this will invalidate the warranty . Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s). SYMPTOM ?[...]

If the fault persists, you can run the Diagnostic Program in the player . INSTRUCTIONS: 1 Switch the player off. 2 Hold both OPEN/CLOSE and ; pressed and switch on the player . ➜ ‘ BUSY ’ appears on the display together with a counter . The counter indicates the termination of the test when it reaches zero. ➜ After a few minutes, ‘ BUSY ?[...]