Philips SWW1890 manuale d’uso

Register your pr oduct and get support at www .philips.com/w elcome EN User manual 3 SWW1890[...]

[...]

3 Contents 1 Important 4 Safety 4 2 Y our Philips Wireless HD Net Connect 6 What is in the box 6 3 Overview 7 The transmitter 7 The receiver 7 4 Installation 9 Connect the transmitter to your computer 9 Connect the receiver to the HDTV set 9 5 Activate your Philips Wireless HD Net Connect and set up the link 10 T ur n on the power of y our HDTV 10 [...]

4 Important Safety Instructions a Read these instr uctions. b Keep these instr uctions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water . f Clean only with dr y cloth. g Do not block an y ventilation openings. Install in accordance with the manufacturer’ s instr uctions. h Do not install near any heat source[...]

5 m Unplug this apparatus dur ing lightning storms or when unused for long per iods of time . n Refer all ser vicing to qualied ser vice per sonnel. Ser vicing is required when the apparatus has been damaged in any way , such as power -supply cord or plug is damaged, liquid has been spilled or objects hav e fallen into the apparatus, the apparat[...]

6 USB cable for the po wer supply of the transmitter (2 feet 1 inch / 1.5 meter s) P ower adapter for the receiv er Anchor s x 2 Screws x 2 Adhesive tape x 2 Quick Installation Guide Quick star t guide User manual 2 Y our Philips Wir eless HD Net Connect Congratulations on your purchase and welcome to Philips! T o fully benet from the suppor t t[...]

7 The r eceiver T op view 1 LED indicator Displa ys the status of the receiver . 2 Po wer button with LED indicator Press to turn the receiver on/off or to standby mode . 3 INFO button Displays on the HDTV the connection status of the receiver . Rear view 1 DC IN connector Connect the pow er adapter of the receiver . 2 HDMI OUT connector Connect to[...]

8 The Philips Wireless HD Net Connect gives you a total wireless solution to enjo y the content from your computer on y our HDTV . The transmitter can tr ansmit an uncompressed video content up to 23 feet (7 meters) without latency . The receiver can receiv e signals for viewing on your HDTV . All you need to do is: • Connect the transmitter to y[...]

9 » The pow er LED indicator of the transmitter ashes in blue , then turns into solid blue when the connection is established. Connect the r eceiver to the HDTV set HDM I HDM I 1 Connect the receiver with the supplied HDMI cable: • Connect one end of the HDMI cable to HDMI OUT connector of the receiver . • Connect the other end of the HDMI [...]

10 On screen displa y on HDTV On screen displa y Mode and status Standby mode: it is a pow er -saving mode . .... Star t up in progress: It takes 15-20 seconds. x and .... Searching availab le channels: It occur s when the link cannot establish o ver 80 seconds after initialization. HDMI CH1 On mode with unrecognized video format HDMI CH1 On mode b[...]

11 LED indicator status of the receiv er Po wer LED Status LED Mode and status Solid red Off Standby mode for po wer - saving Flashing blue Flashing Setting up a Link between the transmitter and receiver Solid blue Flashing quickly On mode but without input from the computer/ source device Solid blue Flashing slowly On mode with unrecognized video [...]

12 5 Hook the key holes at the back of the receiver on the screws. 6 Mount y our r eceiver Y ou can either mount the receiver on the wall or on the back of the HDTV . Mount y our receiv er on the wall 1 Select a spot near the HDTV . 2 Drill two holes in the wall. Make sure that the distance between the tw o holes is 1 25 / 32 ” (45mm) and the dia[...]

13 6 Align the adhesive tape on the receiv er with the one on the HDTV until both the receiver and HDTV are mounted together rmly . Note • The use of adhesive tapes is an alternative mounting option when the receiver cannot be x ed. • When you mount the receiv er at the back of the HDTV , avoid b locking the ventilation holes of the HDTV [...]

14 Operating frequencies: 5.15-5.25GHz / 5.725-5.825GHz Po wer supply: Input: A C 100~ 240V Output: DC 5V , 2A Operating temperature: 0~40°C/32~104°F T ransmitter interfaces A/V interfaces HDMI input: One (T ype A, Male) Po wer interface P ower input: The USB cable connected to the USB jack of the computer LEDs Status LED: 1 x blue LED Dimensions[...]

15 IMPOR T ANT NO TE: Radiation Exposure Statement: • This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm betw een the radiator & your body . • This transmitter must not be co-located or operating in conjunction with[...]

16 Incidental, special and consequential damages are disclaimed where permitted by law . This warr anty gives you specic legal rights. Y ou may also hav e other r ights that var y from state to state . Recycling Y our product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose [...]

17 9 Fr equently ask ed questions The pow er LED on the receiv er is not lit up in red in standb y mode . Make sure that there is pow er supply for the receiv er . The laptop scr een image is not full screen on m y TV . 1 Right-click on an open space on y our desktop. 2 Select Gra phics Options > Output to > Digital T elevision (Now the lapto[...]

18 If the picture quality is poor , what do I do? • Make sure that the video scale and resolution of y our computer matches the resolution of your HDTV (See chapter ‘T echnical data’). • Make sure that the transmission r ange between receiver and transmitter is not over 23 feet (7 meters) tr ansmission distance . I cannot hear any sound or [...]

19 For MA C operating system: MA C oper ating system detects the exter nal display equipment and switches to a better resolution automatically when y ou plug in the display cable to MA C ser ies. Note • If the MA C operation system does not detect the exter nal display automatically , click on > Prefer ence > Detect Displays . • This prod[...]

20[...]

[...]

[...]

[...]

[...]

© 2011 K oninklijke Philips Electr onics N.V . All rights reserved. IFU_SWW1890_EN_V2.0 WK11472[...]