Sherwood Newcastle R-865 manuale d’uso

R - 865 Audio/V ideo Receiver[...]

2 Introduction ENGLISH READ THIS BEFORE OPERA TING Y OUR UNIT : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION W ARNING This symbol is inten[...]

3 ENGLISH 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instruction[...]

ENGLISH 4 CONTENTS • Introduction READ THIS BEFORE OPERATING YOUR UNIT | 2 SAFETY INSTRUCTION | 3 • System Connections | 5 • Front Panel Controls | 14 • Universal Remote Controls | 16 OPERATING COMPONENTS WITH REMOTE CONTROL | 18 REMOTE CONTROL OPERATION RANGE | 18 LOADING BATTERIES | 18 USING FUNCTIONS OF REMOTE CONTROL | 19 • ROOM 2 Rem[...]

MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. "DOLBY", "PRO LOGIC", AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DLOBY LABORATORIES. SPEAKER IMPEDANCE FRONT , CENTER , SURROUND A or B, SURROUND BACK : 6 OHMS ( ) MIN. SURROUND A and B : 12 OHMS ( ) MIN. 3 12 7 1 8 14 10 9 9 2 5 6 43 11 51 3 System Connections • Pleas be cert[...]

ENGLISH 6 TAPE MONITOR Tape deck, MD recorder, etc. AUDIO IN R L AUDIO OUT R L AUX Additional tape deck. etc. AUDIO OUT R L CD CD player, etc. AUDIO OUT R L • The TAPE MONITOR IN/OUT jacks may also be connected to the LINE OUT/IN jacks of an optional graphic equalizer. 2. CONNECTING AUDIO COMPONENTS 3. CONNECTING VIDEO COMPONENTS • There are th[...]

7 ENGLISH • The jacks of VIDEO 1/VIDEO 2 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • For ROOM 2 playback, the VIDEO 2/ ROOM 2 OUT jacks can be connected to the amplifier, TV, etc. installed in another room.(For details, r[...]

ENGLISH 8 4. CONNECTING DIGIT AL INs and OUT • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to CD, AUX and VIDEO 1~ VIDEO 4 of this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, LD player, DVD player, etc. capable of outputting DTS Digita[...]

ENGLISH 9 6. CONNECTING PREOUT s • Use these jacks when adding additional power amplifiers. • Connect the PREOUT jacks to the powered speakers or the power amplifiers connected to speakers respectively. • When using only one surround back speaker, connect the SURROUND BACK LEFT jack to the power amplifier. • If this is the case, you can con[...]

ENGLISH 10 Front right Front left Surround A right Surround B right Surround A left Surround B left Surround back right (or "Passive" subwoofer) Center Surround back left 9. CONNECTING SPEAKERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+ and -). If the connections are fa[...]

ENGLISH 11 Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible. • Place the [...]

ENGLISH ROOM 2 connections • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the VIDEO 2 / ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect the SURROUND BACK speaker terminals to the spea[...]

11. CONNECTING MICROPHONE • To use Auto Speaker Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to “ When selecting the AUTO SPEAKER SETUP ” on page 55.) Notes: • Because the microphone for Auto Speaker Setup is designed for use with this receiver, do not use a microphone other than the one supplied[...]

ENGLISH 14 Front Panel Controls 1. POWER switch 2. STANDBY button/indicator 3. DECODING MODE button 4. STEREO button 5. DIGITAL/ANALOG button 6. PURE AUDIO button 7. VIDEO SELECTOR button 8. AUDIO SELECTOR button 9. TAPE MONITOR button 10. 8 CH DIRECT button 11. MASTER VOLUME CONTROL knob 12. MULTI CONTROL knob 13. REMOTE SENSOR 14. FLUORESCENT DIS[...]

DOLBY H DIGITAL EX VIRTUAL DIRECT AUTO DTS ES 96 /24 NEO: 6 PCM PRO LOGIC SOUND T APE MON STEREO MPEG PURE ANALOG DIGIT AL TUNED PRESET VIDEO SET 1 2 3 4 Z R2 MUTE CINE-EQ MEMORY AP-SW A B L C R SL SW SR SB LFE 1 2 10 11 12 13 14 15 16 17 3 4 5 6 7 3 8 9 18 19 20 21 22 ENGLISH 15 FLUORESCENT DISPLAY 1. CHANNEL indicators 2. PCM SIGNAL indicator 3. [...]

ENGLISH 16 Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc. • To operate 7 components other than this receiver, you should enter the setup code for each[...]

ENGLISH 17 FUNCTION TABLE of the NUMBERED BUTTONS. Device to be controlled Button symbol (for CD player) POWER ON STANDBY POWER ON STANDBY POWER ON STANDBY MENU SETUP DISPLAY RETURN RECORD STOP STOP REVERSE PLAY FORWARD PLAY PAUSE PAUSE PLAY PLAY PLAY NUMERIC NUMERIC NUMERIC NUMERIC NUMERIC NUMERIC RECORD STOP PAUSE STOP REVERSE SKIP( ) / FORWARD S[...]

ENGLISH 18 7m 30 30 LO ADING BA TTERIES REMO TE CONTROL OPERA TION RANGE 1 2 • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. OPERA TING COMPONENTS WITH REMOTE CONTR OL • Remove the batteries when they are not used for a long time. • Do not use the rechargeabl[...]

19 ENGLISH USING FUNCTIONS OF REMO TE CONTROL Entering a setup code • This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered. • For system remote control operation, “ 000 ” was s[...]

ENGLISH 20 • If any of buttons fails to operate as they should, start from the step again to find the correct setup code. Repeat the above steps to for each of your other components. 7 Searching a setup code Perform the steps and in “Entering a setup code” procedure on page 19 to select the setup code mode (“CODE”). 2 Turn on the componen[...]

ENGLISH 21 • If the command has been learned successfully, “OK” is displayed and then “SEL” is flickering. • If “ERROR” is displayed and then “SEL” is flickering, it means that for some reason the command was not learned. In this case, repeat the above steps and . Notes : • If an incorrect signal has been sent or, in some case[...]

ENGLISH 22 Erasing the programmed command from one button While “ BTTN ” is displayed, press the CURSOR UP( )/DOWN( ) buttons to select the one command deleting mode (BTTN), then press the ENTER button. 2 Perform the steps and in “ Entering a setup code ” procedure on page 19 to select the delecting mode ( “ DELETE ” ). 1 While “ SEL [...]

ENGLISH 23 Programming a macro function Example) When playing a DVD on the DVD player connected to VIDEO 2 jacks of this receiver. 1. Press “ AUDIO ” button to control this receiver. 2. Press “ POWER ON ” button to turn this receiver on. 3. Press “ VIDEO 2(7) ” button to select the desired input source. 4. Press “ DVD ” button to co[...]

ENGLISH 24 Programing a punch-through function • Each time the CURSOR UP( )/DOWN( ) buttons are pressed , depending on the selected punch- through mode, punch-through devices and the one punch-through deleting mode ( “ DELETE ” ) are selected as follows : • In case of the volume punch-through, AUDIO DELETE TV • In case of the transport pu[...]

ENGLISH 25 Operating a punch-through function • Each time the CURSOR UP( )/DOWN( ) buttons are pressed, depending on the selected punch- through mode, the punch-through devices and the deleting mode ( “ DELETE ” ) are selected. • Then “ OK ” is displayed and the current punch- through mode is displayed . While “ VOL ” is displayed, [...]

ENGLISH 26 Erasing all the punch-through functions programmed under a master device mode • Then “ OK ” is displayed and “ DELETE ” is displayed. • To exit from the deleting mode, press any of the DEVICE buttons. While “ VOL ” is displayed, press the CURSOR UP( )/DOWN( ) buttons to select the all punch-through deleting mode ( “ DEL[...]

27 ROOM 2 Remote Controls This remote control unit is an additional remote control unit for the ROOM 2 source playback only. • You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal remote control unit. LO ADING BA TTERIES 1 2 REMO TE CONTROL OPERA TION RANGE • Aim the ROOM 2 rem[...]

ENGLISH 28 LISTENING T O A PR OGRAM SOURCE Operations Before operation Select the desired input source. 3 • Enter the standby mode. • The STANDBY button lights up in amber. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness. • To switch the power off,[...]

ENGLISH 29 Operate the selected component for playback. 5 Select the tone mode as desired. 7 Select the digital or the analog input as desired. 4 At the tone defeat mode, each time the MULTI CONTROL knob is rotated, the tone defeat mode changes as follows: DEFEAT ON : When listening to a program source without the tone effect. DEFEAT OFF : When adj[...]

ENGLISH 30 • “ MUTE ” lights up. • To resume the previous sound level, press the button again. • Ensure that the HEADPHONE SELECTOR button is set to the speaker off mode. • Depending on the signal format which is being input, you can listen in different Dolby Headphone modes, stereo mode, etc. with pressing the DOLBY HEADPHONE button. ([...]

ENGLISH DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channel digital signal format which can handle higher data rates. Discs bearing the “ ” include the recording of up to 5.1 channels of digital signals, which can be generally thought to provide better sound quality due to the lower audio compression required. I[...]

ENGLISH Dolby Pro Logic IIx surround Dolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1 channel sources and extends to 7.1channel surround playback. It delivers the most natural, full range and immersing 7.1 channel listening experience. Dolby Pro Logic IIx surround includes two modes as follows : • Dolby Pro Logic IIx Movie When enjoyin[...]

ENGLISH 33 For your reference, the sound from each channel can be reproduced according to the surround modes as follows: (*): Depending on the subwoofer mode setting, the sound from the subwoofer channel may be reproduced. • Depending on the speaker settings and the number of the encoded channels, etc. the sound from the corresponding channels ca[...]

ENGLISH 34 ENJO YING SURROUND SOUND • Surround sound effect will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer. Note: • Before surround playback, first perform the SPEAKER SETUP procedure, etc. on the OSD menu f[...]

ENGLISH Continued 35 When canceling the surround mode for normal stereo operation. • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2 CH downmix mode, select the desired surround mode with using the MULTI CONTROL knob or DSP MODE UP/DOWN [...]

ENGLISH 36 To listen in a Dolby Headphone mode • The Dolby Headphone function simulates 5.1 channel surround sound, which allows you to enjoy 5.1 channel surround sound through 2 channel headphones, just like listening from 5.1 channel speakers. Note : Only when the HEADPHONE SELECTOR button is set to the speaker off mode, the Dolby Headphone mod[...]

ENGLISH or DOWN UP 37 Enter the test tone mode. 1 • The volume level of each channel can be adjusted easily with the test tone function. Note: When speakers are switched off , the test tone function does not work. Cancel the test tone function. 3 Adjusting each channel level with test tone • The test tone will be heard from the speaker of each [...]

ENGLISH 38 Repeat the above steps and to adjust each channel level. 3 Adjust the level of the selected channel as desired. 2 Adjusting the Dolby Pro Logic IIx / Dolby Pro Logic II Music parameters Press the DOLBY PL II MUSIC PARAMETER button to select the desired parameter. 1 • When selecting either the Dolby Pro Logic IIx Music mode or the Dolby[...]

ENGLISH 39 LISTENING T O RADIO BR O ADCASTS Auto tuning • Auto presetting function automatically searches for FM stations only and store them in the memory. • While listening to radio broadcasts, press and hold down the (ENTER/)MEMORY button for more than 3 seconds. • Then “ AUTO ” appears on the display. The tuner will now search until a[...]

ENGLISH Repeat the above steps to to memorize other stations. 4 • The station has now been stored in the memory. • A stored frequency is erased from the memory by storing another frequency in its place. • If “ MEMORY ” goes off, start again from the above step . MEMORY BACKUP FUNCTION The following items, set before the receiver is turned[...]

ENGLISH 41 • The receiver will start scanning the stations in the preset sequence and each station is received for 5 seconds. • At the desired station, press this button again to stop scanning. Scanning preset stations in sequence Listening to FM stereo broadcasts • While listening to FM broadcasts. • Each time this button is pressed, the F[...]

ENGLISH 42 RECORDING • The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs can be heard but cannot be recorded. • The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals. Start recoding on the component connected to TAPE MONITOR. 2 Select the desired inpu[...]

ENGLISH 43 DIGIT AL A UDIO RECORDING WITH MD RECORDER For digital recording, select the desired digital input as recording signal input. 2 Select a desired input of CD, AUX and VIDEO 1~VIDEO 4 as a recording source. 1 Start recording on the component connected to OPTICAL DIGITAL OUT. 3 • Only when the OPTICAL DIGITAL OUT of this receiver is conne[...]

ENGLISH 44 O THER FUNCTIONS • This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track(with extremely high volume)to minimize the difference in volume between the specified and non- specified parts. This makes it easy to hear all of the sound track when watching movies at night at low levels. • ?[...]

ENGLISH 45 Select the desired input source to enter its label. 1 Press the LABEL button to enter the label input mode. Example ) When selecting VIDEO 1. 2 Select the character on the flickering digit. 3 Confirm your selection. 4 Repeat the above steps and to enter the desired characters on the rest of the digits. 5 Memorize the desired label. 6 Ent[...]

46 ROOM 2 SOUR CE PLA YBACK • This function allows enjoying one source in the main room and playing another in a different room at the same time. • The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be output from the (VIDEO 2/) ROOM 2 OUTs, meaning[...]

47 Using the OSD CURRENT ST A TUS DISPLA Y This mode shows the status corresponding to each operation. • The on-screen display will automatically disappear in several seconds. • For examples, there are 2 status displays as follows. Notes : • When watching a movie earnestly, if you want to turn off the current status display function, set the [...]

48 Select the desired menu using the CURSOR UP( )/DOWN( ) buttons. 2 Confirm your selection. 3 • The selected category or item will provide the needed setting details using the subsequent screens. When selecting the POWER AMP ASSIGN When selecting the SPEAKER SETUP When selecting the SYSTEM SETUP When selecting the SURROUND SETUP When selecting t[...]

49 • You can assign the power amplifier for the surround back channels to the ROOM 2. In this case, you need not use the power amplifier to drive the speakers additionally in a different room (ROOM 2). RETURN :Ba c k , : S e l e c t PO W ER A M P ASS I GN S/ B A C K ROO M 2 SETTING THE POWER AMP ASSIGN • Each time these buttons are pressed, the[...]

50 • Depending on your speaker type, you can select one of these following speaker types. • Yes/No : Select the desired depending on whether a subwoofer is connected or not. • Large : Select this when connecting speakers that can fully reproduce sounds below crossover frequency. • Small : Select this when connecting speakers that cannot ful[...]

51 Press the CURSOR UP( )/DOWN( ) buttons to select the SPEAKER DISTANCE, then press the ENTER button. 1 When selecting the SPEAKER DISTANCE • Then “ ” and “ ” are moved to the unit mode. • Each time these buttons are pressed, “ Meters ” or “ Feet ” is selected. • Once a unit is selected, the distances are automatically change[...]

52 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the DOLBY VS(Virtual Speaker) mode as desired. 2 • Each time these buttons are pressed, the Dolby Virtual Speaker mode changes as follows : On : Select this to activate the Dolby Virtual Speaker function. Off : Select this to cancel it. Press the CURSOR UP( )/DOWN( ) buttons to select the VIR[...]

53 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode. 6 • Each time these buttons are pressed, the virtualization mode changes as follows: WIDE: This mode expands the front channel sound field. REFERENCE: This is the standard mode. Notes : • When “ WIDE ” is selected as virtualization mode, you can select “ 2-SPEAKER ?[...]

54 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired crossover frequency. 2 • You can select the desired within 40~120 Hz in 20 Hz intervals(default value: 80 Hz). • For speakers set to “ Small ” , sound with a frequency below the selected crossover frequency is cut, and instead the cut bass sound is output from the subwoofer [...]

55 ENGLISH • Loud test tones are output from each speaker and then if auto speaker setup procedure has been completed, the results of each adjustment will be displayed. • Each time the ENTER button is pressed, the auto speaker setup procedure will start or stop. • If there may be a problem with speaker or microphone connection, error message [...]

56 ENGLISH • Then the results are memorized. • Each time the CURSOR LEFT( ) or RIGHT( ) button is pressed, the “ MEMORY ” or “ START ” is selected. • However, if error message is displayed, the results cannot be memorized due to incorrect speaker connections, etc.. In this case, turn off the power, check the connections or change spea[...]

57 • Each time these buttons are pressed, “ ” and “ ” are moved to the corresponding DIGITAL IN. • You should assign the connected DIGITAL INs to the desired of CD, AUX and VIDEO 1~4. (For details, refer to “ CONNECTING DIGITAL INs and OUT ” on page 8.) Note: • When the pure audio function is activated, the TONE CONTROL cannot be [...]

ENGLISH 58 • Each time these buttons are pressed, the modes change as follows: C I NE M A EQ : TO N E DE FEAT : Off Off T O NE CONTROL BASS ----- ----- 0 dB TREB LE ----- ----- 0 dB RETURN: Ba c k , : S elect Press the CURSOR UP( )/DOWN( ) buttons to select the TONE CONTROL, then press the ENTER button. 1 Press the CURSOR LEFT( )/RIGHT( ) buttons[...]

ENGLISH 59 • Each time these buttons are pressed, the video input source changes. Press the CURSOR UP( )/DOWN( ) buttons to select the CURRENT VIDEO. 1 Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired video input source. 2 • Each time these buttons are pressed, the mode changes as follows: On : To turn on the current status displ[...]

ENGLISH 60 • Each time these buttons are pressed , the COMPONENT VIDEO INs change . Note : • In such a case that a COMPONENT VIDEO IN is assigned to two input sources or more, when these input sources are selected, the component video signals can be viewed from the same COMPONENT VIDEO IN. • Each time these buttons are pressed, “ ” and ?[...]

61 • To turn on the component connected to DC TRIGGER OUT jack when the desired input source is selected, you should link DC TRIGGER with the desired input source. DC T RI G G E R : T UNER V I DEO 1 CD V I DEO 2 AUX V ID E O 3 TA P E M O N. VI D E O 4 DC TRI G G ER S ETUP Off ENTER : Se t , , , : Move Press the CURSOR UP( )/DOWN( ) buttons to sel[...]

ENGLISH 62 • Each time these buttons are pressed, the A/V SYNC can be adjusted within the range of 0~6 frame. Press the CURSOR UP( )/DOWN( ) buttons to select the A/V SYNC. 1 Press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the A/V SYNC as desired. 2 When selecting the A/V SYNC • There may be a slight delay between the video and audio signal[...]

ENGLISH 63 When selecting the DECODING MODE, SURROUND MODE, DYNAMIC RANGE • Each time these buttons are pressed, “ ” and “ ” are moved to the corresponding mode. • Each time these buttons are pressed, the modes change as follows according to the selected item : When DECODING MODE is selected • Depending on the input digital signal for[...]

ENGLISH 64 When the SURROUND MODE is selected • Depending on the input signal format and the selected decoding mode, you can select the desired surround mode as follows: Signal format being input Selected decoding mode Selectable surround mode Dolby Digital 5.1, Auto, Dolby Digital mode (DOLBY DIGITAL EX,) Dolby Digital EX 6.1 channel sources DOL[...]

ENGLISH 65 PANO RAM A : CENTER WIDTH + ------- 0 DIM E N S I O N --- - + -- 0 - 0 + Off PL I I x M US I C PARAMETER RE TURN : B a c k , : S e l e c t Press the CURSOR UP( )/DOWN( ) buttons to select the PL II(x) MUSIC PARAMETER, then press the ENTER button. 1 When selecting the PL IIx MUSIC PARAMETER(or the PL II MUSIC PARAMETER) When selecting the[...]

ENGLISH 66 • Each time these buttons are pressed , the mode changes as follows : CALL : Select this to recall the channel levels memorized into preset memory . SAVE : Select this to memorize the channel levels adjusted in the CH LEVEL TRIM menu or in “ Adjusting the current channel levels ” procedure on page 37. • You can recall the memoriz[...]

ENGLISH 67 • Each time these buttons are pressed, “ ” is moved to the corresponding channel. Note : • Depending on the speaker settings and surround mode, etc., some channels cannot be selected. • You can adjust the current channel levels as desired. These adjusted levels are just memorized, not into preset memory. • Each time these but[...]

ENGLISH 68 Repeat the above steps and until each level is adjusted as desired. 4 • Each time these buttons are pressed, “ ” is moved to the corresponding LFE level mode. • Each time these buttons are pressed, the LFE level can be adjusted within the range of either -10~0 dB for Dolby Digital program sources or -10~+10 dB for DTS and MPEG pr[...]

ENGLISH 69 • The ROOM 2 function allows enjoying one source in the main room while playing another in a different room at the same time. • The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be output from the VIDEO 2 / ROOM 2 (audio) OUTs. • Each [...]

ENGLISH 70 • Each time these buttons are pressed, the ROOM 2 FEED mode is changed to “ On ” or “ Off ” . • When the ROOM 2 FEED mode is set to “ Off ” , the ROOM 2 source cannot be selected. • When you do not use the ROOM 2 function, set the ROOM 2 FEED mode to Off to save electricity. Press the CURSOR UP( )/DOWN( ) buttons to sel[...]

ENGLISH 71 T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound No sound from the surround speakers No sound from the center speaker No sound from the surround back speakers Stations cannot be received Preset stations cannot be received Poor FM reception Continuous hissing noise during FM reception, especially when a stereo broadc[...]

ENGLISH AMPLIFIER SECTION • Power output, stereo mode, 8 Ω , THD 0.05%, 20 Hz~20 kHz | 2 100 W • Total harmonic distortion, 8 Ω , 100 W, 1 kHz | 0.05 % • Intermodulation distortion 60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω , 100 W | 0.09 % • Input sensitivity/impedance Line (CD, TAPE MONITOR, VIDEO) | 200 mV/47 k Ω • Signal to noise ratio,[...]

ENGLISH 73 Setup Code T able AOC 005 003 Admiral 041 031 Aiko 014 Akai 005 Alaron 026 Ambassador 024 America Action 027 Ampro 043 Anam 027 047 048 049 Audiovox 030 027 014 034 Baysonic 027 Belcor 003 Bell & Howell 019 001 Bradford 027 Brockwood 003 Broksonic 028 031 CXC 027 Candle 005 011 Carnivale 005 Carver 010 Celebrity 050 Cineral 030 014 C[...]

ENGLISH 74 Admiral 027 021 Adventura 000 Aiko 025 Aiwa 005 000 Akai 026 America Action 025 America High 004 Asha 023 Audiovox 005 Beaumark 023 Bell & Howell 017 Brocksonic 021 Broksonic 020 018 021 001 CCE 015 025 Calix 005 Canon 004 Carver 081 Cineral 025 Citizen 005 025 Colt 015 Craig 005 012 023 015 024 Curtis Mathes 013 004 026 028 Cybernex[...]

ENGLISH 75 Headquarter 011 Hitachi 000 008 026 Hughes Net.Sys 008 JVC 014 026 Jensen 026 KEC 005 025 KLH 015 Kenwood 014 026 006 Kodak 004 005 LXI 005 Lloyd ’ s 000 Logik 015 MEI 004 MGA 023 009 MGN Technology 023 MTC 023 000 Magnasonic 025 Magnavox 004 007 016 000 019 Magnin 023 Marantz 004 016 Marta 005 Matsushita 004 028 029 Memorex 004 005 02[...]

ENGLISH 76 Magnin 023 Memorex 005 028 (TV use 025) Mitsubishi 027 (TV use 041) Orion 001 Panasonic 004 (TV use 008) 028 (TV use 042) Penney 004 (TV use 008) 023 028 (TV use 042) Quasar 004 (TV use 008) 028 (TV use 042) RCA 013 (TV use 012) 004 (TV use 008) 027 (TV use 041) Sansui 000 Sanyo 023 Sear 000 005 Sharp 027 (TV use 041) Sony 002 (TV use 00[...]

ENGLISH 77 Stargate 010 014 026 Starquest 010 TV86 015 Teleview 014 Tocom 007 008 Toshiba 000 Tusa 010 Unika 018 United Artists 007 Universal 153 019 Viewstar 015 Zenith 000 024 Zentek 022 AlphaStar 008 Chaparral 001 Echostar 009 Expreevu 009 General Instrument 016 015 018 HTS 009 Hitachi 011 Hughes Net.Sys 007 JVC 009 Jerrold 016 015 Megavox 006 0[...]

78 GE 043 Lutron 044 One For All 042 Radio Shack 043 Security System 042 Universal X10 042 X10 042 Awia 045 059 029 Fisher 005 Harman/Kardon 046 JBL 046 JVC 047 Jerrold 031 RCA 006 Scientific Artlanta 032 Sony 045 Starcom 031 AUX-DBS Archer 013 GC Electronics 013 Jebsee 013 Rabbit 036 Radio Shack 013 AUX-ACCESSARY AUX-HOME AUTOMA TION Awia 010 030 [...]

R - 865 5707-04745-001-1 Audio/V ideo Receiver[...]