Zanussi ZDT 312 manuale d’uso

User manual Dishwasher ZDT 312[...]

Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of [...]

Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnecessary mistakes and accidents, it is im- portant to ensure that all people using the appliance are thoroughly familiar with its opera- ti[...]

Installation • Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • All packaging must be removed before use. • Any electrical and pl umbing work required to install this appliance must be carried out by a qualified and competent person. • For safety reas[...]

In addition to the dishwashing programme se- lection, the following functions can also be set with the help of these buttons: • the setting of the water softener, • deactivation/activation of the audible sig- nals. • cancel a washing programme or a delay start in progress • activation/deactivation of the rinse aid dispenser when the Multi-t[...]

Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: • setting the water softener, • end of the programme, • intervention of an alarm due to malfunction. IMPORTANT! Factory setting: audible signals activated. Deactivation/activation of the audible sig- nals 1. Press On/Off button[...]

4. The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. 5. Once the delay start has elapsed the pro- gramme will start automatically . Cancelling the delay start To cancel a delay start in progress you have to reset the dishwasher. Press simultaneously and keep[...]

Washing programmes Programme Degree of soil Type of load Programme description Intensive 70° Heavy soi l Crockery, cutlery, pots and pans Prewash Main wash 2 intermediate rins es Final rinse Drying Normal 65° Normal soil Crockery, cutlery, pots and pans Prewash Main wash 1 intermediate rins es Final rinse Drying 60° A 30' 1) Light so il Cro[...]

When using tablets that integrate rinse aid and detergent: there is no need to fill up with rinse aid – set the water softener – add special (dishwasher) salt When using tablets that integrate rinse aid, detergent, salt function and other additives: there is no need to fill up with special salt or rinse aid. Check whether these detergents are s[...]

Water hardness Adjusting the water hardn ess setting Use of salt Clarke °TH mmol/l manually electronically 46 - 52 65 - 75 6,5 - 7,5 2 level 8 yes 36 - 45 51 - 64 5,1 - 6,4 2 level 7 yes 28 - 35 40 - 50 4,0 - 5,0 2 level 6 yes 23 - 27 33 - 39 3,3 - 3,9 2 level 5 yes 18 - 22 26 - 32 2,6 - 3,2 1 level 4 yes 13 - 17 19 - 25 1,9 - 2,5 1 level 3 yes 5 [...]

light with a sequence of intermittent audible signals and a pause of a few seconds. Examples: 5 flashes / 5 intermittent audible signals, pause, 5 flashes / 5 intermittent audible signals, pause, etc...= level 5 6 flashes / 6 intermittent audible signals, pause, 6 flashes / 6 intermittent audible signals, pause, etc...= level 6 4. To change the lev[...]

Remove any trace of salt. Replace the c ap tightly turning it c lockwise unt i l it stops with a click. IMPORTANT! Immediat e ly start a comp lete programme. IMPORTANT! Water will overfl ow from the contain er as salt is added. IMPORTANT! Top up the special salt when the light on the control panel illuminates. Filling with rinse aid Open the li d. [...]

Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades. Open the li d. Set the dosage le vel. (The dose is factor y set in po- sition 4). Close the li d and press un- til it loc[...]

For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden , horn, china or mother-of- pearls handle s. • Plastic items th at are not he at resistant. • Older cutlery with glued parts tha t are not tempera- ture resistant. • Bonded cutl ery items or dishe s. • Pewter [...]

Load upper ba sket. Light items (plastic bowls etc.) must be lo aded in the up - per basket and arrang ed so they do no t move. For taller items, th e cup racks can b e folded up- wards. If plates are to be loaded in the upper basket: load them starting from the rea r positions; tilting the m slightly forwards and avoiding the front positions ne ar[...]

IMPORTANT! Never lift or lower the basket on one side only IMPORTANT! When the basket is in the higher position you will not be able to use the cup racks. Use of detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and stor- age recommendations. Open the li d. Fill in the deter gent in compartment A[...]

Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appli- ance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. • Water may appear on the sides and the door of t[...]

Put the flat filter A back in the base of the washi ng compartmen t and ensure that it fits perfectly under the two guides D . Replace t he filters and lock by turn ing th e handl e clockwise to th e stop. Cleaning the spray arms NEVER try to remove the spray arms. If residues of soil have clogged the holes in the spray arms, remove them with a coc[...]

3. Remove the water inlet and discharge ho- ses. 4. Pull the machine out together with the ho- ses. Avoid over tilting the machine during transpor- tation. Environmental concerns Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic com- ponents are identified by markings, e.g. >PE<, >PS&l[...]

Fault code and malfunction Possible cause and solution • 1 intermittent audible signal • continuous flashing of the light of the running programme • 1 flash of the "end of pr ogramme " indicator light The dishwasher does no t fill with water. • The water tap is blocke d or furred wi th limescale. Clean the wat er tap. • The wate[...]

The wash results ar e not satisfactory The dishes ar e not clean • The wrong wash ing programme h as been select ed. • The dishes are arranged in su ch a way as to st op water reaching all pa rts of the surface. The baskets must not be ov erloaded. • The spray arms do not rota te freely due to incorrect arrangement of the load. • The filter[...]

temperature of the water and also by the var- iations of the power supply and the amount of dishes. Consumption values Programme Programme duration (in minutes) Energy consumption (in kWh) Water (litres) Intensive 70° 80-90 1,6-1,8 22-2 4 Normal 65° 95-105 1,4-1,6 18-20 60°A30' 30 0,9 9 BIO 50° (Test pro- gramme for Test Insti- tutes) 160 [...]

Full load: 12 standa rd pl ace settings Amount of de tergent required 5 g + 25 g (Type B) Rinse aid se tting position 4 (Type III) Upper basket Cutlery bask et Lower basket cup racks: position A Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumbe[...]

Inlet hose Connect the inlet hose to a water tap with an exte rnal thread of 3/4”. The inlet hose can be turned eith er to the left or th e right to suit the installa tion by means of the locknut. The locknut must b e correctly fitted to avoid water leaks. Drain hose Connect dra in hose to the sink. Required height: 30 to 100 cm above botto m of [...]

Electrical connection CAUTION! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plu[...]

26[...]

27[...]

www.electrolux.com www.zanussi-electrolux.co.uk 15699118 0-00-26112007[...]