AOC I2477FWQ manual

www .aoc.com © 2014 AOC. All Rights Reserved. LED Backlight LCD Monitor User Manual I2477FWQ/I2777FQ[...]

Safety ............................................................................................................................... ......................................... 4  National C onventio ns .......................................................................................................... ............................... 4 [...]

Plug and Play ............................................................................................................................... .................... 58  Regulati on .................................................................................................................... ........................................... 59  [...]

Safety National Conventions The following subsections desc ribe notational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text ma y be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and w arn ings, and the y are used as follo w s: NOTE: A NOTE [...]

Power The monitor should be operated onl y from the type of power source indicated on the label . If y ou are not sure of the type of power supplied to your hom e, c onsult your dealer or local p ow er company . The monitor is equipped w ith a three-pron ged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded[...]

Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, br acket, or table recommended by the manufacturer or sold with this product. Follo w the manufacturer ’s instructions when installing t[...]

Cleaning Clean the cabinet regularly w ith cloth. Y ou can us e soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the pro duct cabinet. When cleaning, make sure no deterge nt is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the po w e[...]

Other If the product is emitting a strange smell, sound or smoke, disconnect the po w er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating ope nings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vib rati on or high impact conditions duri ng operation. Do not knock or drop the monitor d[...]

Se t Cont e Not al regions. P t up e nt of t h l signal cable s P lease check w h e Box s (Analog , Au d w ith the local d io dealer or AO C , DP , MHLan d C branch offic e d HDMI cable s e for confirma t s ) will be provi t ion. ded for all co u u ntries and Pow e CD Man u e r Cable A u a l A da p te r Monitor Ba A nalo g Cabl e Monitor s e e HDMI[...]

Setup Stand Please setup or remove the Stand foll owing the steps as below . Setup Remove: 75mm 75mm M4 × 10 10[...]

Adjusting V iewing Angle For optimal viewing it is recommended to look at the full fa ce of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you w ill not topple the mon i tor w hen you c hange the monitor's angle. Y ou are abl e to adjust the monitor's angle from -3° to 24 °. NOTE:Do not adju[...]

Con n 1. Pow e 2. Anal o 3. HD M 4. Audi o 5. Earp h 6. Displ 7. HD M T o protec t 1. Con 2. Con com 3. (Op t mo n 4. (Op t and 5. (Op t mo n 6. (Op t 7. Tur n If your m o T roubles h n ecting e r o g (D-Sub 15 - M I o in h one out ay port M I/MHL t equipment, a nect the pow e nect one end puter's D-Su b t ional – Requi n itor and conn e t i[...]

W all Mounting Preparing to Install An Optional W all Mounting Arm. This monitor can be attached to a w all mounting arm you purchas e separately . Disconne ct power before this procedure. Follow these steps: 1. Remove the base. 2. Follow the manufacturer's instructions to asse mble the wall mounting arm. 3. Place the wall mounting arm onto th[...]

Adjusting Setting Optimal Resolution Windows 8 For Windows 8 : 1. Right click and click A ll apps at the bottom-right of the screen. 2. Set the “ View by ” to “ Category ”. 3. Click Appearance and Person alization. 14[...]

4. Click DISPLAY. 5. Set  the  resolution  SLIDE-BAR  to  Optimal  preset  resolution 15[...]

Windows 7 For Windows 7: 1. 1. Click START. 2. 2. Click CONTROL PANEL. 3. 3. Click APPEARANCE. 4. 4. Click DISPLAY. 16[...]

5. Set the resolution SLIDE-BAR to Optimal pres et resolution. 17[...]

Windows Vista For Windows Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization. 4 Click Personalization 18[...]

5 Click Display Settings. 6 Set the resolution SLIDE-BAR to Optimal preset resolution 19[...]

Windo w For Win d 1 Click S T 2 Click S E 3 Click C O 4 Click A p 5 Double w s XP d ow s XP: T ART . E TTINGS. O NTROL P A N p pearan ce a n click DISPL AY N EL. n d Themes. AY . 20[...]

6 Click S E 7 Set the Windo w For Win d 1 Click S T 2 Click S E 3 Click C O 4 Double 5 Click S E 6 Set the E TTINGS. resolution S L w s ME/20 0 d ows ME/200 0 T ART . E TTINGS. O NTROL P A N click DISPL AY E TTINGS. resolution S L L IDE-BAR to O 0 0 0 : N EL. AY . L IDE-BAR to O O ptimal prese t O ptimal prese t t resolution t resolution 21[...]

Hotkeys 1 Source/Auto/Exit 2 Clear Vision/< 3 V olume/ > 4 Menu/Enter 5 Power Power Press the Power button to turn on/off the monitor . V olume / > When there is no OSD, press V olume adjust volume. Auto / Exit When there is no OSD, press Auto / Exit button c ontinuously about 3 second to do auto configure. Source hot key When the OSD is c[...]

Clear Vision/ < 1. When there is no OSD, Press the “< ” button to activate Clear Vision. 2. Use the “<” or “>” buttons to select between weak, medium, strong, or off settings. Default setting is always “off”. 3. Press and hold “<” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vi[...]

Using "MHL(Mobile High-Definition Link)" （ Optional ） 1."MHL" (Mobile High-Definition Link) This feature allo w s you to enjoy videos and photos (im por ted from a connected mobile device that supports MHL) on the screenof the product. z T o use the MHL function, you nee d an MHL-certified mobi le device. Y ou can check if y[...]

OSD Setting Basic and simple instruction on the control keys. 1. Press the MENU-button to activate the OSD window . 2. Press - or + to navigate through the functions. Once t he de sired function is highlighted, press the MENU-button to activate. Press - or + to navigate through the sub-menu . Once the desired function is highlighted, press MENU-but[...]

Luminance 1 Press (Menu) to display menu. 2 Press - or + to select (Luminance), an d press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Brightness 0-100 Backlight Adju stment. Contrast 0-100 Contra st from Digital-register. Eco mode Standard Standard Mode. Tex t Text Mode. Internet In[...]

Image Setup 1 Press (Menu) to display menu. 2 Press - or + to select (Image Setup), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Clock 0-100 Adjust picture Clock to reduce Vertical-Lin e noise. Phase 0-100 Adjust Picture Phase to reduce Horiz ontal-Line noise. Sharpness 0-10[...]

Color Setup 1 Press (Menu) to display menu. 2 Press - or + to select (Color Setup), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Color Temp. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature[...]

Picture Boost 1 Press (Menu) to display menu. 2 Press - or + to select (Picture Boost), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Frame Size 14-100 Adjust Frame Size. Brightness 0-100 Adjust Frame Brightness. Contrast 0-100 Adjust Frame Contrast. H. position 0-10 0 Adjust[...]

OSD Setup 1 Press (Menu) to display menu. 2 Press - or + to select (OSD Setup), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . H. Position 0-100 Adjust the horizontal position of OSD. V. Position 0-100 Adjust t he vertical pos ition of OSD. Timeout 5-120 Adjust the OSD Timeout[...]

Extra 1 Press (Menu) to display menu. 2 Press - or + to select (Extra), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Input Select Auto/D-SUB/HDMI1(MHL1)/HDMI 2/DP Select input signal source. Auto Config yes or no Auto adjust the picture to default. Off timer 0-24hrs Select D[...]

Exit 1 Press (Menu) to display menu. 2 Press - or + to select (Exit), and press to enter . 3 Press to exit . Exit Exit the main OSD. 32[...]

LED Indicator Status LED Colo r Full Power Mode Blue Active-off Mode red 33[...]

Driver Monitor Driver Windows 8 1. Start Windows® 8 2. Right click and click A ll apps at the bottom-right of the screen. 3. Click on the “Control panel” icon 4. Set the “Vie w by” to “Large icons” or “Small icons” . 34[...]

5. Click on the “Display” icon. 6. Click on the “Change display settings” button. 7. Click the “ Advanced Settings” button . 8. Click the “Monitor” tab and then click the “Properties” button . 35[...]

9. Click the “Driver” tab. 10. Open the “Update Driver Software-Gen eric PnP Monitor” window by clicking on “Update Driver ... “ and then click the "Browse my comp uter for driver software" button. 11. Select "Let me pick from a list of device driv ers on my computer" . 36[...]

12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:Drivermodule name ( w here X is the driv e letter designator for the CD-ROM drive). 13. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 14. Select your monitor model and click the “Nex[...]

Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon. 38[...]

4. Click on the “Change display settings” button. 5. Click the “ Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button. 39[...]

7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device driv ers on my computer" . 40[...]

10. Click the “Have Disk” button. Click on the “Browse” button and navi gate to the following directory: X:Drivermodule name ( w here X is the driv e letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “Ne[...]

Windows Vista 1. Click "Start" and "Control Panel". Then, do uble-click on "Appearance and Personalization". 2. Click "Personalization" and then "Dis play Settings". 3. Click "Advanced Settings...". 42[...]

4. Click "Properties" in the "Monitor" t ab. If the "Properties" button is deactiv a ted, it means the configuratio n for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue". 5. Click "Update D[...]

Windo w 1. Start 2. Click 3. Sele c 4. Click w s XP Windows® X on the 'Start' c t and click o n on the 'Displ a P button and th n the categor y a y' Item. en click on 'C o y ‘Appearance o ntrol Panel'. and Themes’ 44[...]

5. Sele c 6. Sele c - - Ple a 7. Click c t the 'Setting s c t 'Monitor' ta b If the 'Prope r If the 'Prope r a se follow th e on the 'Drive r s ' tab then cli c b r ties' button is r ties' button i s e steps below . r ' tab and the n c k on the 'Adv inactive, it m e s active, click o n click on[...]

8. Sele c 9. Sele c 10. Click (CD- 11. Click 12. Sele c - 13. Click 14. Click c t the 'Install f c t the 'Don't S on the 'Have ROM Drive). on the 'Open c t your monit o If you can s e message, pl e on the 'Finis h on the 'OK' b rom a list or s earch. I will c h disk...' button ' button, then o r mod[...]

Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Se ttings', and then click on 'Contro l Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' butt[...]

i-Me n Welcome screen m e guide. n u to “i-Menu” s o e nus instead o o ftware by A O o f the OSD b u O C. i-Menu m a u tton on the m a kes it easy t o m onitor . T o co m o adjust your m m plete installa t m onitor displa y t ion, please f o y setting by u s o llow the insta s ing on llation 48[...]

e-Saver Welcome to use AOC e-Saver monitor po w er management soft w are! The AOC e-Saver features Smart Shutdo w n functions for your monitors, all ows your monitor to timely shutdown when PC unit is at a ny status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driv[...]

Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displa ys a different window . Y ou only need to drag the window to a corresponding pane, when you want to access it. It supports multiple m onitor displa y to make your task easier . Ple[...]

T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and po w er suppl y . Is the signal cable connected correc[...]

Monitor Is Stuc k In Active Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is prop erly connected to the computer . Inspect the monitor's video cable and mak e sure no pin is bent. Make sure your computer is operati ona[...]

Specification General Specification Panel Product name Driving system TFT Color LCD Viewable Image Size 60.47cm diagonal Pixel pitch 0.2745(H)mm x 0.2745(V)mm Video R, G, B Analog lnterface & Di gital Interface Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5MHz Resoluti on Horizontal scan range 30 kHz - 83 kH z Horizontal scan[...]

Panel Product name Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Pixel pitch 0.31 14mm(H) X0.31 14mm(V) Video R, G, B Analog lnterface ,Dig ital interface Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5MHz Resoluti on Horizontal scan range 30 kHz - 83 kH z Horizontal scan Size(Maximum) 597.888mm Vertical scan ra[...]

Preset Display Modes Standard Resolution H. Frequency (kHz) V. F requency (Hz) VGA 640 X 480@60Hz 31.469 59.940 VGA 640 X 480@72Hz 37.861 72.809 VGA 640 X 480@75Hz 37.500 75.000 IBM MODE DOS 720 X 400@70Hz 31.469 70.087 SVGA 800 X 600@56Hz 35.15 6 56.250 800 X 600@60Hz 37.87 9 60.317 800 X 600@72Hz 48.07 7 72.188 800 X 600@75Hz 46.87 5 75.000 XGA 1[...]

Pin Assignments 15-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name 1 Video-Red 9 +5V 2 Video-Green 10 Ground 3 Video-Blue 1 1 N.C. 4 N.C. 12 DDC-Serial data 5 Detect Cable 13 H-sync 6 GND-R 14 V -sync 7 GND-G 15 DDC-Serial clock 8 GND-B 56[...]

Pin No. 1 2 3 4 5 6 7 8 20-Pin C o Pin N 1 2 3 4 5 6 7 8 9 10 Signal Na m TMDS Dat a TMDS Dat a TMDS Dat a TMDS Dat a TMDS Dat a TMDS Dat a TMDS Dat a TMDS Dat a o lor Display S o. Sig n ML_ L GND ML_ L ML_ L GND ML_ L ML_ L GND ML_ L ML_ L m e a 2+ a 2 Shield a 2 a 1+ a 1Shield a 1 a 0+ a 0 Shield S ignal Cable n al Name L ane 3 (n) L ane 3 (p) L [...]

Plug and Play Plug & Play DDC2B Feature This monitor is equipped w ith VESA DDC2B capabilities according to the V ESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity a nd, depending on th e level of DDC used, communicate additional information about its display capabil ities. The DDC2B is a bi-directional data cha[...]

Regulation FCC Notice FCC Class B Radio Freq ue ncy Interference State ment W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason able protection against harmful interference in a re[...]

WEEE Declaration Disposal of W aste Equipment by Users in Pr ivate Hous ehold in the European Union. This symbol on the product or on its packagi ng indicates t hat this product m ust not be di sposed of with yo ur other household wast e.Instead, it is your responsibility to dis pose of your waste equipment by handing it over to a designated coll e[...]

EPEA T Declaration EPEA T is a system to help purchasers in the public an d private sectors evaluate, comp are and select desktop computers, notebooks and monitors based on their environmental attributes. EPEA T also provides a clear and consistent set of performance criteria for the design of products, and provides an o pportunity for manufacturer[...]

TCO DOCUMENT (FOR TCO CER T IFIED MOD ELS) 62[...]

Service W arranty Statement for Europe LIMITED THREE-YEAR W ARRANTY* For AOC LCD Monitors sold wi thin Europ e, AOC Internat ional (Europe) B.V . warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) B.V .[...]

This limited warranty does not cover any of the product fi rmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for an y such modifications or alteration. All AOC LCD Monitors are produced according to the ISO 9241-307 C lass 1 pixel policy standards. If your warranty has expired, y[...]

Service W arranty Statement for Middle East and Africa (MEA) And The Commonwealth of Indepe ndent States (CIS) LIMITED jednego do trze ch lat gwarancji* For AOC LCD Monitors sold wi thin the Midd le East and Africa (MEA) and the Commonwealth of Indepen dent States (CIS), AOC International (Eur o pe) B.V . warrants this product to be free from defec[...]

• Improper installation or maintenance oth er then in accordance with AOC’s user manual • Misuse • Neglect • Any cause other than ordinar y commercial or industrial application • Adjustment by non-authorized source • Repair , modific ation, or installation of options or parts by anyone other than an AOC Certified or Authorized Service[...]

AOC International (Europe) B.V . Prins Bernhardplein 200 / 6th floor, Amsterdam, The Nethe rlands Tel: +31 (0)20 504 6962 • Fax: +31 (0)20 504693 3 AOC Pixel Policy ISO 9241-307 Class 1 July 25 th , 2013 AOC strives to deliver the highest quality products. W e us e some of the industry’s most advanced manufacturing processes and practice string[...]

W arranty Statement for North & South America (excluding Brazil) W ARRANTY ST A T EMEN T for AOC Color Monitors Including those Sold w ithin North America as Specified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CR[...]

ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANT ABILITY AND FIT NESS FOR A P ARTICULAR PURPOSE) ARE LIMIT ED IN DURA T ION TO A PERIOD OF THREE (3) YEA RS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EX PRESSED OR IMPL[...]

EASE PROGRAME Only for AOC branded monitors sold wi thin the continental United States. All A OC branded monitors are no w covered by the EA SE Program. If your monitor malfunctions at any time during the first three mont hs, AOC will provide a replac ement monitor within 72 hours after you are approved for our program. I f your monitor qualifies f[...]