AT&T E2520 manual

User Manual (P ar t 2) 2.4 GHz Cor dless Speak erphone E2520 with Caller ID & Call W aiting 91-000020-021-000-E2520 Manual-ENG.qxd 2/13/1950 7:21 PM Page 1[...]

Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. STOP! See page 7 for easy instructions. You must install and charge the batteries before using the telephone. Please also read Important Product Information Enclosed in produc[...]

1 T ab le of contents User Manual (P ar t 2) 2.4 GHz Cor dless Speak erphone E2520 Getting Started Quick reference guide ........................2 Parts checklist .......................................4 Before you begin ..................................5 Telephone base installation................6 Battery installation & charging ..........7 [...]

HANDSET 1 REDIAL MEM MENU 2 Getting Started Off/Clear During a call, press to hang up.(see page 10) While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display.(see page 14) Quick r eference guide Speaker Press to activate handset speaker- phone. Press again to switch call back to earpiece.(see page 10) S[...]

3 Getting Started Quick r eference guide Telephone function keys (see pages 11-13) INTERCOM ............ Press to transfer a call or initiate an intercom conversation. HOLD ...................... Press to hold a call, press again to release hold. MUTE ......................Press to silence microphone; press again to resume. VOLUME ................P[...]

4 Getting Started P ar ts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Telephone base Telephone handset Power adapter Belt clip Batteries telephone line cord Wall mount bracket 91-000020-021-000[...]

5 Getting Started Befor e y ou begin About Caller Identification Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call. These features require services provided by your local telephone company. Contact your telephone service provider if: • You have both C[...]

6 Getting Started T elephone base installation Install the speakerphone base as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Plug power cord transformer into electrical outlet. Plug long telephone line cord into telephone [...]

LOW BATTERY 7 Getting Started Batter y installation & charging After installation, place the handset in the base and allow the batteries to charge for 8 hours before use. You can keep batteries charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 6 hours. Press coin into [...]

8 Getting Started W all mounting The speakerphone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal comput- ers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Plug power cord transformer into electrical outlet. Connect cords [...]

9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Snap belt clip into notches on side of handset. Rotate and pull to remove. Plug 2.5 mm heads[...]

10 Telephone Operation Basic handset operation Making and answering calls To answer a call, press PHONE or any dial pad button. To make a call, press PHONE , then dial a number. Press OFF or place the handset in the base to hang up. To preview numbers before dialing, enter numbers first, then press PHONE to dial. Press CLEAR at any time to make cor[...]

11 Telephone Operation Basic base operation Making and answering calls To answer an incoming call, press SPEAKERPHONE . To make a call, press SPEAKERPHONE, then dial a number. Press SPEAKERPHONE again to hang up. Hold and mute Press HOLD to place a call on hold. Press SPEAKER- PHONE to resume the call. Press MUTE to silence the microphone. You will[...]

12 Telephone Operation Options while on calls To adjust volume or sound quality Press VOLUME buttons on the handset or the base to adjust listening volume. Each button press raises or lowers volume by one level. During a handset call you can press SOUND SELECT to change the sound quality heard through the earpiece. You can choose Natural Audio, Bas[...]

13 Telephone Operation Inter com calls Intercom calls The intercom allows conversation between the handset and base, or between handsets if you have registered additional handsets for use with your system. At a handset, press the INTERCOM button. Scroll down to select a station, or select GLOBAL PAGE to page all sta- tions. Press OK to page the sel[...]

14 Telephone Operation Handset settings Ringer volume At this menu you can set a default ring volume level (1- 4), or turn the ringer off. Press the <> buttons to hear an example of each level. Press OK to save your selection. Ringer melody This feature allows you to choose one of eight incoming call melodies. Press the <> buttons to he[...]

15 Telephone Operation 15 Handset clock settings To set time Follow steps at left to set the handset clock time. Use the keypad to enter four digits (i.e., 09:15), then press AM/PM to toggle the display between AM and PM. When the correct time is displayed, press SAVE . NOTE: You can choose to set the time manually, or you can allow it to be set au[...]

16 Telephone Operation CLOCK MODE CALLS LOG SET TIME HANDSET SETTINGS HANDSET 1 Base settings fr om handset Base Settings Menu in Handset This menu allows the user to set Tone/Pulse and Ringer Melody on the base by handset. Tone/Pulse You can choose Tone or Pulse dialing for the base and all registered handsets. The factory default setting is TONE [...]

17 Telephone Operation Base settings fr om handset Base ringer volume At this menu you can set a default ring volume level (1- 6), or turn the ringer off. Press * button three times to enter programming mode at the base. You will hear a happy tone. The IN USE and SPARE BATTERY lights will flash. Press VOLUME buttons to hear an example of each volum[...]

18 Phonebook Memory capacity The phonebook can store up to 50 entries. Each entry can contain a number up to 32 digits, and a name up to 16 letters long. A convenient search feature can help you find and dial numbers quickly (see page 20). Timeouts and error tones If you pause for too long while making an entry the pro- cedure will time out and you[...]

19 Phonebooks 555-1234 ENTRY HAS BEEN STORED! ENTER NAME PAT WILLIAMS_ Enter number, then press MEM . Enter name, then press SAVE . New phonebook entries To enter a number Use the dial pad to enter up to 32 digits. When the number is complete, press MEM . • Press CLEAR to erase numbers if you make a mistake. • Press PAUSE to enter a 3-second di[...]

20 Phonebooks Phonebook sear ch You can use the up/down arrows to browse through the phonebook, or search to find a specific entry. You can press OFF at any time to exit the directory. To browse through the directory To browse, press ^ or V to scroll through all entries one by one. To search alphabetically To shorten your search, press FIND , then [...]

21 Phonebooks T o dial, edit or delete entries To dial a number When any phonebook entry is displayed, press PHONE (or SPEAKER ) to dial the displayed number. To delete an entry Press EDIT , then DEL to display options: • To delete only the displayed entry, press THIS . • To delete all entries in the phonebook, press ALL . To confirm your choic[...]

22 Caller ID Logs Caller ID Logs How Caller ID works If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring. Your call log holds up to 50 entries. Each entry can con- tain a number up to 16 digits, and a name up to 16 let- ters long. You can review the call lo[...]

23 Caller ID Logs T o r evie w y our call log To review your call log The most recent call is displayed first. Use the arrow buttons to scroll through the list as shown at left. To return a call Press PHONE (or SPEAKER ) to call the person currently displayed (see next page for important dialing options). Other options Press CID to display other op[...]

24 Caller ID Logs T o dial a call log entry When any Caller ID screen is displayed, press PHONE (or SPEAKER ) to dial the number exactly as it appears on the screen. Dialing options Caller ID numbers may appear with an area code that may not be required for local calls. If the number displayed is not in the correct format, you can change how it is [...]

25 Appendix Displa y scr een status icons Handset status icons Phone in use (external call). Phone in use (intercom call); flashes when handset is being paged. Battery power level (see below). Ringer off. R Handset is not yet registered, or searching for base. Battery power levels Battery fully charged. Approximately half power remaining. Battery p[...]

26 Appendix “Beep” (Single beep) Handset registration or programming command successfully completed. “Beeeeeeeeep” (1 long beep) The handset is out of range. Move closer to the base. “Beeeeeeeeep” (1 long beep) Error tone (current operation has been unsuccessful; try again). Aler t tones and indicator lights “Beep-Beep-Beep-Beep-Beep?[...]

27 Appendix Adding ne w handsets Your telephone can accommodate up to eight cordless handsets . You can add new handsets (Model E250, sold separately) at any time, but each must be registered with the base before use. Before using a new handset, you must register it with the base. During registration, you must enter the 15-digit ID number of the te[...]

28 Appendix Charging spar e batteries Optional spare batteries (sold separately) can be kept charged in the base, for quick replacement when handset batteries become depleted. For best results, use AT&T AA rechargeable batteries (SKU 26820). In the event of a power failure, the charged batteries in the base will allow you to make and receive ca[...]

29 Appendix In case of difficulty If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com , or call 1–800–222–3111. Telephone does not work at all • Make sure batteries are installed and charged correctly (see page 7). • Make sure the AC adapter is plugge[...]

30 Appendix A AC adapter, 6 Alert tones, 26 Answering calls, 10, 11 Antenna, 3 B Battery charging, 7, 28 Battery installation, 7 Belt clip, 9 C Call logs, 22-24 Caller ID, 5, 22 add entries to phone directory, 23 delete entries, 23 dial entries, 24 CID, 22 Conference calls, 12 D Delete Call Log entries, 23 Delete redial entries, 10 Dialing, manual [...]

31 Appendix N Names, 19 enter into phonebook, 19 search for, 20 O Out of range, 5, 14, 29 P Paging, 13 Phonebooks, dial number, 21 edit entries, 21 name search, 20 new entries, 19 Q Quick reference guide, 2-3 R Receiving calls, 10, 11 Recharging, 7, 29 Redial, 10 Ring silencing, 12 Ring tone options, 14, 17 S Search for name, 20 Spare batteries, 28[...]

32 Appendix T echnical specifications RF Frequency Band (Handset to Base) 2400 MHz — 2483.5 MHz Output Power 3 dBm RF Frequency Band (Base to Handset) 2400 MHz — 2483.5 MHz Channels 95 Channel Spacing 864 KHz Operating Temperature 32°F — 122°F 0°C – 50°C Base Unit Voltage (AC Voltage, 60Hz) 96 — 127 Vrms Base Unit Voltage (AC Adapter [...]

Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 01/05. 91-000020-021-000 www .telephones.att.com 91-000020-021-000-E2520 Manual-ENG.qxd 2/13/1950 7:21 PM Page 33[...]