English dropdown-ico

Cisco Systems 1900 Series manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Cisco Systems 1900 Series, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Cisco Systems 1900 Series one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Cisco Systems 1900 Series. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Cisco Systems 1900 Series should contain:
- informations concerning technical data of Cisco Systems 1900 Series
- name of the manufacturer and a year of construction of the Cisco Systems 1900 Series item
- rules of operation, control and maintenance of the Cisco Systems 1900 Series item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Cisco Systems 1900 Series alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Cisco Systems 1900 Series, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Cisco Systems service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Cisco Systems 1900 Series.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Cisco Systems 1900 Series item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco 1 90 0 S eries Integrated S er vices Router Hardw are Installation Text Part Number: OL -19084-03[...]

  • Page 2

    THE SPECIFICATION S AND INFORMATION RE GARDING THE PRODU CTS IN THIS MANUAL ARE SUBJECT TO CHAN GE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIB ILITY FOR THEIR APPLICATION OF ANY P[...]

  • Page 3

    iii Cisco 1900 Series Hardware Installation CONTENTS OL-19084-03 i Preface vii Objectives vi i Audience vii Organization viii Conventi ons viii Related Documentation xv Searching within Cisco Docume nts xvi Obtaining Documentation and Submitting a Serv ice Request xvi CHAPTER 1 Overview of the Router 1-1 Safety Warnings 1-1 Safety Warnings for Finl[...]

  • Page 4

    Contents iv Cisco 1900 Series Hardware Instal lation General Guidelines 2-1 Safety with Electricity 2-2 Preventing Electrostatic Disch arge Damage 2-3 General Site Requirements 2-3 Power Supply Considerations 2-4 Site Environment 2-4 Site Configuration 2-4 Wireless LAN Considerations 2-5 Inspecting the Router 2-5 Installation Checklist 2-5 Site Log[...]

  • Page 5

    Contents v Cisco 1900 Series Hardware Installation OL-19084-02 Chassis Airflow Diagram 4-3 Setting the Chassis on a Deskto p 4-4 Chassis Grounding 4-4 Wall-Mounting the Chassis 4-4 Rack-Mounting the Chassis 4-7 Attaching Rack-Mount Brackets to Cisco 1900 Series Routers 4-7 Installing the Chassis Ground Connection 4-9 Connecting WAN and LAN Cable s [...]

  • Page 6

    Contents vi Cisco 1900 Series Hardware Instal lation Using the Cisco CLI—Manual Configuration 5- 6 Initial CLI Configuration 5-7 Configuring the Router Hostname 5-8 Configuring the Enable and Enable Secret Passwords 5-9 Configuring the Console Idle Privileged EXEC Timeout 5-10 Configuring Gigabit Ethernet Interfaces 5-12 Specifying a Default Rout[...]

  • Page 7

    vii Cisco 1900 Series Hardware Installation OL-19084-02 Preface This preface describes the objectiv es, audience, org anization, and con ventions of this gui de, and describes related docu ments that ha ve additio nal information. • Objecti ves, page vii • Audience, p age vii • Organization, page viii • Con v entions, page vi ii • Related[...]

  • Page 8

    viii Cisco 1900 Series Hard ware Installation OL-19084-02 Preface Organization This guide includes th e follo wing sections: Conventions This document uses the f ollo wing con ventions: Note Means reader take note . Section T itle Description 1 Overvie w of Cisco 1900 Series Routers Describes the features and specif ications of the router . 2 Prepa[...]

  • Page 9

    ix Cisco 1900 Series Hardware Installation OL-19084-02 Preface Ti p Means the following information will help you solve a pr oblem . Caution Means reader be car eful . In this situation, you might perform an actio n that could result in equipment damage or loss of data. T imesaver Means the described action saves t ime . Y ou can sa ve time b y per[...]

  • Page 10

    x Cisco 1900 Series Hard ware Installation OL-19084-02 Preface Attention IMPORT ANTES INFORMA TIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger . V ous vous trouvez dans une situation pouvant entraîner des blessures ou des do mmages corporels. A vant de travailler sur un équipement, soyez conscient des dangers liés aux ci rcu[...]

  • Page 11

    xi Cisco 1900 Series Hardware Installation OL-19084-02 Preface ¡Advertencia! INSTRUCCIONES IMPORT ANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, conside re los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención[...]

  • Page 12

    xii Cisco 1900 Series Hard ware Installation OL-19084-02 Preface Avis o INSTRUÇÕES IMPORT A NTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipam ento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiariz[...]

  • Page 13

    xiii Cisco 1900 Series Hardware Installation OL-19084-02 Preface[...]

  • Page 14

    xiv Cisco 1900 Series Hard ware Installation OL-19084-02 Preface War ni ng When installing the product, please use the provided or designated connection cables/power cables/AC adaptors. Using a ny other cables/adaptors could cause a malfunction or a fire . Electrical Appliance and Material Safety Law prohibits the use of UL-ce rtified cables (that [...]

  • Page 15

    xv Cisco 1900 Series Hardware Installation OL-19084-02 Preface Avoid usin g a telephone (other than a cordless type) during an electrica l storm. There may be a remote risk of electric shock from ligh tning. Statement 1038 Related Documentation The Cisco IOS software that runs your Cisco 1940 series rout er includes ext ensiv e features and functio[...]

  • Page 16

    xvi Cisco 1900 Series Hard ware Installation OL-19084-02 Preface Searching within Cisco Documents T o search an HTML document using a web bro w ser , press Ct rl-F (W indows) or Cmd-F (Apple) . In most browsers, the option to search whole words only , in vok e case sensitivity , or search forward and backward is also av ailable. T o search a PDF do[...]

  • Page 17

    CH A P T E R 1-1 Cisco 1900 Series Hardware Installation OL-19084-02 1 Overview of the Router The Cisco 1900 Series Integrated Services Routers (ISRs) are modular routers with LAN and W AN connection s that can b e conf igured b y means of interchangea ble inte rface cards and internal service modules (ISMs) . The series curren tly consists of the [...]

  • Page 18

    1-2 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Chassis Views War ni ng No user -serviceable parts inside. Do not open. Statement 1073 War ni ng Only trained and qualified pe rsonnel should be allowed to install, replace, or service this equipm ent. Statement 1030 Safety Warnings for Finland, Norway and Sw[...]

  • Page 19

    1-3 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Chassis Views Caution Po wer of f the PoE before installing an EHWIC in the Cisco 1905 and Ci sco 1921 ISRs. Figure 1-2 sho ws the back panel of the Cisco 1905 and Cisco 1921 with ports and LEDs. Figur e 1 -2 Back P anel of the Cisco 1 905 an d Cisco 1921 Rout[...]

  • Page 20

    1-4 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Chassis Views Figur e 1 -3 Fr ont P anel of the Cisco 1941W Router Figure 1-4 sho ws the front panel of the Ci sco 1941W (without antennas) w ith the LED names. Figur e 1 -4 Cisco 1941 and Cisco 1941W Rout er LEDs Figure 1-5 sho ws the Cisco 1941 and 1941W ba[...]

  • Page 21

    1-5 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Hardware Features Figur e 1 -5 Back P anel of the Cisco 1 941 and Cisco 1941W Router Hardware Features • Product Serial N umber Location, page 1-6 • Built-In Interfaces, page 1-7 • Remov able, Interchangeable, and Op tional Modules, page 1-8 • Memory ,[...]

  • Page 22

    1-6 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Hardware Features • Chassis V entilation, page 1-12 • Real-T ime Clock, page 1-12 • Chassis Security , page 1-12 • W ireless LA N Connecti vity , page 1-12 • Baud Reset Button, page 1-13 Product Serial Number Location The serial number and common la[...]

  • Page 23

    1-7 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Hardware Features Figur e 1 -8 Ser ial Number , PID/VID, and CLE I Number Location on Cisco 19 40 Ser ies Rout ers Note The serial number for Cisco 1900 series r outers is 11 ch aracters long. Cisco Product I dentification Tool The Cisco Product Identif icatio[...]

  • Page 24

    1-8 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Hardware Features Note Either the RJ-45 console port or U SB console port may be used. The y can not both be used at the same time. Removable, Interchangeable, and Optional Modules Some modules can be installe d either by insert ing them into slots on the cha[...]

  • Page 25

    1-9 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Hardware Features Memory Cisco 1900 series rout ers contain the follo wing typ es of memory: • DRAM—Stores the running conf igurati on and routing tables and is used f or packet b uffering by the network interfaces. Cisco IOS software executes fro m DRAM m[...]

  • Page 26

    1-10 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Hardware Features LED Indicators Ta b l e 1-4 summarizes t he LED indicators that ar e located in the router bezel or chassi s, but not o n the interface cards. Not all models hav e ev ery LED. Ta b l e 1 -4 Summary of Cisco 1900 Ser ies LED Indicators LED C[...]

  • Page 27

    1-11 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Hardware Features WLAN Green Autonomous Mode On—W ireless lin k is up. Blinking—Ethernet link i s up and data is either being recei ved or bein g transmitted. Off— W ireless link is do wn. Unified Mode On—Ethernet link is up, wireless access po int is[...]

  • Page 28

    1-12 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Hardware Features Chassis Ventilation An internal f an provi des chassis cooling. An onboard temperature sensor contro ls the f an speed. The fan is alw ays on when po wer is applied to the router . Under most conditions , the fan op erates at the slow est s[...]

  • Page 29

    1-13 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Interface Numbering The wireless access point does not have an e xternal console port for connections. T o conf igure the wireless de vice, you must use a console cabl e to connect a PC to the host ro uter’ s console port as described in Chapter 3, “Cable[...]

  • Page 30

    1-14 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Specifications Note On the Ci s co 19 00 s er ie s ro ut er, the numbering format for configuring an a sync interface is 0/slot / port . T o configure the line associated with an async interface, simply use th e interface number to specify the async line. Fo[...]

  • Page 31

    1-15 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Specifications • Surge current <50 A Ports Console One RJ-45 connecto r and one USB mini T ype B, USB 2.0 compliant. Baud rates: 120 0, 2400, 4800, 9600, 19200, 38 400, 57600, and 1152 00. Auxiliary ports RJ-45 connector . Baud rates: 12 00, 2400, 4800, [...]

  • Page 32

    1-16 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Specifications Safety compliance UL 60950-1 CAN/CSA C22.2 No. 6095 0-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1 For detailed compliance information, see Re gulatory Complian ce and Safety Information f or Cisco 1900 Series Router s . T elecom TIA/EIA/IS-968 CS-[...]

  • Page 33

    1-17 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 1 Overview of the Route r Specifications • Maximum PoE de vice po wer capacity with PoE po wer supply 80 W • Surge current <50 A Pow er consumption 110 W maximum platform on ly Ports Console One RJ-45 connecto r and one USB mini T ype B, USB 2.0 compliant. Baud rates: 120 0, 24[...]

  • Page 34

    1-18 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 1 Ov erview of the Router Regulatory Compliance Regulatory Compliance For compli ance info rmation, refer to Re gulatory Compliance and Saf ety Information for Cisco 1900 Series Routers . Safety compliance UL 60950-1 CAN/CSA C22.2 No. 6095 0-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1 Fo[...]

  • Page 35

    CH A P T E R 2-1 Cisco 1900 Series Hardware Installation OL-19084-02 2 Preparing for Router Installation This chapter describes the site requirements and e quipment needed to install your Cisco 1900 series integrated services router . • Safety Recommendations, page 2-1 • General Site Requirements, page 2- 3 • Inspecting the Router , page 2-5 [...]

  • Page 36

    2-2 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 2 Preparing for Ro uter Installation Safety Re commendations War ni ng Read the installation instruc tions before connecting the sy stem to the power source. Statement 1004 War ni ng Blank faceplates and c over panels serve three important functions: they preve nt exposure to hazardou[...]

  • Page 37

    2-3 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 2 Preparin g for Router Installation General Site Requireme nts • If an electrical accident oc curs, proceed as follows: – Use caution; do not beco me a victim yourself. – T urn of f power to the device. – If possible, send another person to ge t medical ai d. Otherwise, assess[...]

  • Page 38

    2-4 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 2 Preparing for Ro uter Installation General Site Requirements Power Supply Considerations Check the power at your site to en sure that you are receiving “clean” po wer (free of spikes and noise). Install a po wer conditioner if necessary . War ni ng The device is designed fo r co[...]

  • Page 39

    2-5 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 2 Preparin g for Router Installation Inspecting the Router Wireless LAN Considerations W ireless comm unication depends upon th e propagation of radio wa ve s. Many en vironmental factors influence radio w av es. The Cisco Multiband Swivel -Mount Dipole Antenna In stallation Note s des[...]

  • Page 40

    2-6 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 2 Preparing for Ro uter Installation Site Log Site Log The Site Log is a record of all acti ons related to the router . Keep it in an accessible place near the chassis so that anyone who performs tasks has easy access to it . Use th e Installation Ch ecklist to verify ste ps in instal[...]

  • Page 41

    2-7 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 2 Preparin g for Router Installation Required Tools and Equipmen t for Installation and Maintenance Required Tools and Equipment fo r Installation and Maintenance Y ou need the follo wing t ools and equipment fo r installing and upgr ading the router and its components: • ESD-pre ven[...]

  • Page 42

    2-8 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 2 Preparing for Ro uter Installation Required Tools and Eq uipment for Installation and Main tenance[...]

  • Page 43

    CH A P T E R 3-1 Cisco 1900 Series Hardware Installation OL-19084-01 3 Cable Information and Specifications for Cisco 1900 Series Routers This document gi v es cable information and specificati ons for the console port , auxiliary port, and network por ts on your Cisco 1900 series inte grated services router . • Console and Auxiliary Port Conside[...]

  • Page 44

    3-2 Cisco 1900 Series Hard ware Installation OL-19084-01 Chapter 3 Cable Information and S pecifications for Cisco 1900 Se ries Routers Console and Auxiliary Port Considerations • USB Serial Co nsole, page 3-2 EIA/TIA-232 Port Depending on the cabl e and the adapter used, this por t will ap pear as a data terminal equipment (DTE) or data communic[...]

  • Page 45

    3-3 Cisco 1900 Series Hardware Installation OL-19084-01 Chapter 3 Cable Information and Sp ecifications for Cisco 1900 Series Routers Preparing to Connect to a Network Auxiliary Port Connections The router has an EIA/TIA-232 asynchronous serial au xiliary port (RJ-45) that support s flo w control. Depending on the cable and the adapter used, this p[...]

  • Page 46

    3-4 Cisco 1900 Series Hard ware Installation OL-19084-01 Chapter 3 Cable Information and S pecifications for Cisco 1900 Se ries Routers Preparing to Connect to a Networ k • Signaling Standards Supp orted, page 3-4 • T ransmission Speeds and Di stance Limitations, page 3-5 • Asynchronous/Synchronous Ser ial Module Baud Rates, page 3-5 About Se[...]

  • Page 47

    3-5 Cisco 1900 Series Hardware Installation OL-19084-01 Chapter 3 Cable Information and Sp ecifications for Cisco 1900 Series Routers Preparing to Connect to a Network the shielded serial transition ca ble has a D B-60 connector, which conn ects to the DB-60 port on a serial WIC. The other end of the serial tran sition cable is a v ailable with a c[...]

  • Page 48

    3-6 Cisco 1900 Series Hard ware Installation OL-19084-01 Chapter 3 Cable Information and S pecifications for Cisco 1900 Se ries Routers Preparing to Connect to a Networ k • Synchronous interface—Maximum baud rate is 128 kbps, full-duplex. ISDN BRI Connections The BRI WICs provide Integrated Services Digi tal Network (ISDN) Basic Rate Interf ace[...]

  • Page 49

    CH A P T E R 4-1 Cisco 1900 Series Hardware Installation OL-19084-02 4 Installing and Connecting the Router Cisco 1900 series routers are normally shipped with a complement o f components that can be upgraded or replaced to expand and enhance the router’ s functiona lity . These components either are inserted internally i nto the router or are pl[...]

  • Page 50

    4-2 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Safety Warnings If you need to remo ve or upgrade eith er of these items, follo w the procedures g iv en in Installin g and Upgradi ng Internal Modules and FR Us in Cisco 1900 Series ISRs . Plug-In Modules The follo wing components p lug into th[...]

  • Page 51

    4-3 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Setting Up the Chassis War ni ng Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Safety Warnings for Finland, Norway and Sweden W arning statement 1017 applies to the count ries o[...]

  • Page 52

    4-4 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Setting Up the Chassis Figure 4-2 sho ws the airflo w through and arou nd the Cisco 1940 series chassis. Figur e 4-2 Cisco 1940 Ser ies Chassis Airflow Setting the Chassis on a Desktop Y ou can place Cisco 1900 ser ies rout ers on a desktop or s[...]

  • Page 53

    4-5 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Setting Up the Chassis The Cisco 1900 series router can be wall-mount ed by using tw o number six, 3/4-inch scre ws and the mounting features on the bottom of the router . Y ou must pro vide the scre ws. W e recommend using pan-head or round- hea[...]

  • Page 54

    4-6 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Setting Up the Chassis Figure 4-4 sho ws the wall-moun ting features on the Cisco 1941 series routers. Figur e 4-4 W all-Mounting F eatur es on the Cisco 1941 Router T o mount the router on a wall or other surface, follo w these steps: Procedure[...]

  • Page 55

    4-7 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Setting Up the Chassis Step 3 Hang the router on the scre ws. This is the appropriate orientation for safe use. (See Figure 4-3 and Figure 4-4 .) Rack-Mounting the Chassis War ni ng Read the wall-mounting in structions carefully before beginning [...]

  • Page 56

    4-8 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Setting Up the Chassis Figur e 4-5 Brac k et Installation for F r ont Moun ting the Cisco 1905 and Cisco 1 921 ISRs Figure 4-6 sho ws ho w to attach the bracke ts to the sides of the router wi th the back panel forward. Figur e 4-6 Brac ket Inst[...]

  • Page 57

    4-9 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Installing the Chassis Ground Con nection Figure 4-8 sho ws ho w to attach the bracke ts to the sides of the router wi th the back panel forward. Figur e 4-8 Brac k et Installa tion for Bac k Mo unting the Cisco 1 940 Ser ies ISR Figure 4-9 sho w[...]

  • Page 58

    4-10 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Installing the Chassis Ground Connection T o instal l the ground connection for a Cisco 1900 series router , follow these step s. Procedure Step 1 Strip one end of the ground wire to expose appr oximately 0.75 in. (20 mm) of con ductor . Step 2[...]

  • Page 59

    4-11 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Connecting WAN a nd LAN Cables Step 4 Connect the other end of t he ground wire to a kno wn good electrical ground po int. Consult with a licensed el ectrician if you ha ve an y questions ab out the suitabilit y of the ground connectio n. Connec[...]

  • Page 60

    4-12 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Connecting WAN an d LAN Cables War ni ng T o avoid electric shock, do not connect safety extra-low voltage (SEL V) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SEL V cir cuits, and WAN ports contain TNV circuit s. Som[...]

  • Page 61

    4-13 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Connecting WAN a nd LAN Cables Ports and Cabling Ta b l e 4-1 summarizes some typical W AN and LAN connections for Cisco 1900 series routers. These connections are also descr ibed in detail in Cisco Modular Access Router Cable Specifications . T[...]

  • Page 62

    4-14 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Connecting to a Console Terminal or Modem Connection Procedures and Precautions Connect each W AN and LAN cable to the a ppropri ate connector on the chassis or interface card. • Position the cables carefully , so that they do not put strain [...]

  • Page 63

    4-15 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Connecting to a Console Terminal or Modem T o connect the rou ter to a terminal or PC, follo w these step s: Procedure Step 1 Connect the end of the console cable with the RJ-45 connector to the light blue console port on the router , or USB 5-p[...]

  • Page 64

    4-16 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Connecting to a Console Terminal or Modem Step 2 Connect the end of the cable with the DB-9 connector (or US B T ype-A) to the termin al or PC. If your terminal or PC has a console port that does not accommodate a DB-9 connec tor , you must pro[...]

  • Page 65

    4-17 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Installing the Cisco Microso ft Windows USB Device Driver Step 5 T o disconnect the Li nux USB console from the T erminal windo w , enter Ctrl-a followed b y : then quit . Installing the Cisco Microsoft Windows USB Device Driver The first ti me [...]

  • Page 66

    4-18 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Uninstalling the Cisco USB Driver Step 6 Connect the USB cable to the PC and r outer USB console p orts. See Ta b l e 4-1 on page 4-15 . The EN LED for the USB conso le port turns green, an d within a fe w moments a series of F ound Ne w Hardwa[...]

  • Page 67

    4-19 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Uninstalling the Cisco USB Driver Procedure Step 1 Click Start > Control P anel > Add or Remove Pr ogr ams . Step 2 Scroll to Ci sco V irt ual Com and clic k Remov e . Step 3 When the Program Main tenance window appears, select the Remove [...]

  • Page 68

    4-20 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Connecting to the Auxiliary Port Connecting to the Auxiliary Port When a modem is connected to t he auxiliary port, a re mote user can dial in to the router and conf igure it. Use the light blue console cabl e and the DB-9-to-DB-25 connector ad[...]

  • Page 69

    4-21 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Connecting Power Connecting Power This section e xplains ho w to connect A C or DC power to Cisco 1900 seri es routers. It cov ers the follo wing topics: • Connecting to A C Power , page 4-21 • Connecting to DC Po wer , page 4-2 2 War ni ng [...]

  • Page 70

    4-22 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Connecting Power War ni ng This product relies on the build ing’ s installation for short-circuit (over curren t) protection. Ensure that the protective device is rated not grea ter than: 15A, 120V AC (10A, 240V AC). Statement 1005 Connecting[...]

  • Page 71

    4-23 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Connecting Power Cisco 1900 Series Router Wi ring Procedure for DC Input T o connect a router t o a DC power sou rce, perform the follo wing step s. Procedure Step 1 Remov e po wer from the DC circuit. T o ensure that power is remo ved from the [...]

  • Page 72

    4-24 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Connecting Power Figur e 4-14 DC P ow er Wir e Connection War ni ng This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028 War ni ng The illustration shows the DC powe[...]

  • Page 73

    4-25 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 4 Installin g and Connecting the Router Connecting Power Figur e 4-15 Installing the Plastic Saf ety Co ver Figur e 4-16 Plastic Saf ety Cove r Installed War ni ng The safety cover is an i ntegral part of the product. Do not o perate the unit without the sa fety cover installed. Opera[...]

  • Page 74

    4-26 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 4 Installing a nd Connecting the Router Connecting Power[...]

  • Page 75

    CH A P T E R 5-1 Cisco 1900 Series Hardware Installation OL-19084-02 5 Configuring the Router This chapter des cribes how to po wer up the route r and perform the init ial configuration in the following sections: • Po wering up the Router , page 5-1 • Performing the Initial Conf iguration on t he Router , page 5-3 – Using the Cisco Setup Comm[...]

  • Page 76

    5-2 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Powering up th e Router • Y ou have a PC with a terminal emulation program (HyperT erminal or equi v a lent) that is connected to the console port. It is configured f or 9600 baud, 8 data bits, 1 stop bit, no parity , and flo w control is set to “non e. ?[...]

  • Page 77

    5-3 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router Verifying the Front Panel LED Indications The front-panel indicator LEDs described in Ta b l e 1-4 provide po wer , acti vity , and status information useful during power up. Performing the Initial Configurat[...]

  • Page 78

    5-4 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router Procedure Step 1 Enter the setup command facil ity . Fr om the Cisco IOS CLI, enter the setup command in pri vileged EXEC mode, enter the follo wing: Router> enable Password: <password> Router# setup[...]

  • Page 79

    5-5 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router Current interface summary Interface IP-Address OK? Method Status Protocol GigabitEthernet0/0 unassigned YES NVRAM administratively down down GigabitEthernet0/1 10.10.10.12 YES DHCP up up GigabitEthernet0/2 un[...]

  • Page 80

    5-6 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router Building configuration... Use the enabled mode 'configure' command to modify this configuration. Press RETURN to get started! %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up %LINK-3-UPDOW[...]

  • Page 81

    5-7 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router If the system conf iguration dialog message does no t appear , a default co nfigu ration file w as installed on the router p rior to shippin g. See the “Using Cisco Conf igurat ion Professional Express” s[...]

  • Page 82

    5-8 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router Router# Configuring the Router Hostname The hostname is used in CLI prompt s and default conf igurati on filen ames. If you do not conf igure the router hostname, the router uses the f actory-assigned default[...]

  • Page 83

    5-9 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router Configuring the Enable and Enable Secret Passwords T o pro vide an additional layer of securit y , particularly for passw ords that cross the network or are stored on a TFTP serv er , you can use either the e[...]

  • Page 84

    5-10 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router DETAILED ST EPS Configuring the Console Idle Privileged EXEC Timeout This section describes ho w to conf igure the console line’ s idle pri vileged EXEC timeout. By default, the pri vileged EXEC co mmand i[...]

  • Page 85

    5-11 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router SUMMARY STEPS 1. enable 2. conf igure termi nal 3. line console 0 4. exec-timeout minutes [ seconds ] 5. end 6. show running-conf ig DETAILED ST EPS Examples The follo wing e xample sho ws ho w to set the co[...]

  • Page 86

    5-12 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router line console exec-timeout 2 30 The follo wing e xample sho ws ho w to set the console idle pri vile ged EXEC timeout to 10 second s: line console exec-timeout 0 10 Configuring Gigabit Ethernet Interfaces Thi[...]

  • Page 87

    5-13 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router Examples Configuring the GigabitEthernet Interface ! interface GigabitEthernet0/0 description GE int to HR group ip address 172.16.3.3 255.255.255.0 duplex auto speed auto no shutdown ! Sample Output for the[...]

  • Page 88

    5-14 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router Specifying a Default Route or Gateway of Last Resort This section de scribes how to specify a default route with IP ro uting en abled. For alternati ve methods of specifying a default route, see the Conf igu[...]

  • Page 89

    5-15 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router Gateway of Last Resort When default in formation is being passed along through a dynamic routing pro tocol, no further confi guration is required. The system periodically scans its routing table to choose th[...]

  • Page 90

    5-16 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router Examples Specifying a Default Route: Example ! ip routing ! ip route 192.168.24.0 255.255.255.0 172.28.99.2 ! ip default-network 192.168.24.0 ! Sample Output for the show ip route Command Router# show ip rou[...]

  • Page 91

    5-17 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router Configuring Virtual Terminal Li nes for Remote Console Access V irtual terminal (vty) lines are used to allo w remote access to the router . This section sho ws you ho w to confi gure the virtual terminal li[...]

  • Page 92

    5-18 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router Example The follo wing e xample sho ws ho w to conf igure virtual terminal lin es with a password: ! line vty 0 4 password guessagain login ! What to Do Next After you conf igure the vty lines, foll ow th es[...]

  • Page 93

    5-19 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router • Confi guring Dialout Using a Modem on the A UX P ort , sample configuration • Confi guring A UX-to-A UX P o rt Async Bac kup with Dialer W atch , sample configuration • Modem-Router Connection Guide [...]

  • Page 94

    5-20 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router DETAILED ST EPS Examples The follo wing display sho ws sample output for t he ping command when you ping t he IP address 192.168.7.27: Router# ping Protocol [ip]: Target IP address: 192.168.7.27 Repeat count[...]

  • Page 95

    5-21 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Performing the Initial Co nfiguration on the Router The follo wing display sho ws sample output f or the ping command when you pi ng the IP hostname donald: Router# ping donald Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.7.27, tim[...]

  • Page 96

    5-22 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Performing the Initia l Configuration on the Router DETAILED ST EPS Examples Copying the Startup Configuration to a TFTP Server: Example The follo wing example sho ws the startup config uration being copied to a TFTP serv er: Router# copy nvram:startup-config[...]

  • Page 97

    5-23 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 5 Configuring the Rou ter Verifying the Initial Configuration Router# show {flash0|flash1}: System flash directory: File Length Name/status 1 4137888 c3900-c2is-mz [4137952 bytes used, 12639264 available, 16777216 total] 16384K bytes of processor board System flash (Read/Write) Route[...]

  • Page 98

    5-24 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 5 Configuring the Router Verifying the In itial Configuration[...]

  • Page 99

    CH A P T E R 6-1 Cisco 1900 Series Hardware Installation OL-19084-02 6 Getting Software Licenses for the Router The Integrated Services Router Generation 2 (ISR G2) platforms of fer a ne w Uni versal Cisco Internet Operating System (IOS) softw are image. The Uni versal image an d its licensing provisi ons provide greater flexib ility to deploy new [...]

  • Page 100

    6-2 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 6 Gettin g Software Licenses for the Router RMA License Transfe r • Cisco License Registration Portal : Cisco license regi stration portal is a web-b ased portal for getting and re gistering indi vidual soft ware licenses. It is a vailable at http://www .cisco.com/go/license . • C[...]

  • Page 101

    6-3 Cisco 1900 Series Hardware Installation OL-19084-02 Chapter 6 Getting Software Licenses fo r the Router Additional Information Note Y ou will ne ed the SN and PID of the defe cti ve de vice , as well as the RMA router to initiate an RMA replacement license. Additional Information See Softwar e Activation on Cisco Inte gr ated Services Router s [...]

  • Page 102

    6-4 Cisco 1900 Series Hard ware Installation OL-19084-02 Chapter 6 Gettin g Software Licenses for the Router Additional Information[...]