English dropdown-ico

Cisco Systems 3560-C manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Cisco Systems 3560-C, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Cisco Systems 3560-C one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Cisco Systems 3560-C. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Cisco Systems 3560-C should contain:
- informations concerning technical data of Cisco Systems 3560-C
- name of the manufacturer and a year of construction of the Cisco Systems 3560-C item
- rules of operation, control and maintenance of the Cisco Systems 3560-C item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Cisco Systems 3560-C alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Cisco Systems 3560-C, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Cisco Systems service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Cisco Systems 3560-C.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Cisco Systems 3560-C item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Catal yst 3560-C and 2960-C S witc h Hardw are Installation Guide Marc h 20 13 Text Part Number: OL -23803-02[...]

  • Page 2

    THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY PRO[...]

  • Page 3

    iii Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 CONTENTS Preface vii Related Publication s i-viii Obtaining Documentation and Submitting a Serv ice Request i-viii CHAPTER 1 Product Overview 1-1 Switch Mode ls 1-1 Front Panel 1-2 10/100 and 10/100/1000 Fas t Ethernet Downlink Ports 1-5 PoE Ports (Switches with PoE Ports[...]

  • Page 4

    Contents iv Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 CHAPTER 2 Switch Installation 2-1 Preparing for Installation 2-1 Warnings 2-1 Installation Guidelines 2-3 Equipment That You Supply 2-4 Box Contents 2-4 Powering the Switch 2-4 Verifying Switch Operation 2-5 Mounting the Switch 2-5 On a Desk or Shelf (without Mou[...]

  • Page 5

    Contents v Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Switch LEDs 3-2 Switch Connections 3-2 Bad or Damaged Ca ble 3-2 Ethernet and Fib er-Optic Cables 3-2 Link Status 3-2 10/100 and 10/100/1000 Po rt Connections 3-3 10/100 PoE or P oE+ Port Connections 3-3 SFP Module 3-3 Interface Settings 3-3 Ping End Device 3-3 Spa[...]

  • Page 6

    Contents vi Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Uninstalling the Cisco Microsoft Windows XP and 20 00 USB Driver C-6 Uninstalling the Cisco Microsoft Windows Vista and Windows 7 USB Driver C-6 Entering the In itial Configuration In formation C-7 IP Settings C-7 Completing the Setup Program C-7[...]

  • Page 7

    vii Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Preface This guide describes the hardware features of the Ca talyst 3560- C and 2960-C switches. It describes the physical and performance ch aracteristics of the switc h, explains ho w to install it , and provid es troubleshooting i nformation. This guide does n ot descr[...]

  • Page 8

    viii Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Preface Related Publications Related Publications http://www .cisco.com/g o/cat3560c_docs http://www .cisco.com/g o/cat2960c_docs Note Before installing, conf iguring, or upgradin g th e switch, see the rele ase notes on Cisco.com for the latest information. • Release[...]

  • Page 9

    CH A P T E R 1-1 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 1 Product Overview The Catalyst 3560-C and 2960 -C of switches, also referred to as the switch , are Ethe rnet switches t o which you can connect de vices such as Cisco IP Phones, Cisco W ireless Access Points, workstations, and other net work devices such a[...]

  • Page 10

    1-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el Front Panel • 8 or 12 do wnlink Ethernet ports of one of these types: – 10/100 – 10/100/1000 – 10/100 PoE – 10/100 PoE+ – 10/100/1000 Po E – 10/100/1000 Po E+ • T wo 10/100/1 000 uplink ports o r two dual purpose p[...]

  • Page 11

    1-3 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Figure 1 -1 Catalyst 2960CPD-8PT -L Fr ont Panel V iew Figure 1 -2 Catalyst 3560CG-8PC-S Fr ont P a nel View 1 Mode b utton 4 LEDs 2 USB mini-T ype B (console) por t 5 10/100 PoE ports 3 RJ-45 console port 6 10/100/1000 up link port[...]

  • Page 12

    1-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el Figure 1 -3 Catalyst 3560 CPD-8PT -S Fr ont P anel View Figure 1 -4 Catalyst 2960 C-12PC-L Front P anel View 1 Mode b utton 5 LEDs 2 USB T ype A port 6 10/100/1000 PoE p orts 3 USB mini-T ype B (console) por t 7 10/100/1000 up lin[...]

  • Page 13

    1-5 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Figur e 1 -5 Catal yst 3560C -12PC-S F ront P anel V iew 10/100 and 10/100/1000 Fast Ethernet Downlink Ports Y o u can set the 10/100 ports t o operate at 10 or 100 Mb/s i n full-duplex or half-duple x mode. Y ou can set the 10/100/[...]

  • Page 14

    1-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el All 8 or 12 do wnlink ports on the Catalyst,35 60C G-8PC-S, 3560C- 8PC-S, and 3560C-12PC-S swit ches are PoE+ capable. The maximum switch power output is 123.2 W . Y ou can budget the PoE and PoE+: • 15.4 W of PoE output on eigh[...]

  • Page 15

    1-7 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Figure 1 -6 P oE Pass-Thr oug h The av ailable switch PoE b udget depends upo n the PoE sent from the u plink switch. See Ta b l e 1 - 2 . 1 PoE or PoE+ uplink switch (Catalyst 3750-X sh own as an example.) 4 Catalyst 2960-C pro vid[...]

  • Page 16

    1-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el PoE Uplink Ports (Catalys t 2960CPD-8TT-L, 2960CPD-8 PT-L, and 3560CPD-8PT-S) The 10/100/1000 PoE upl ink ports on the Catalyst 296 0CPD-8TT -L and 2960CPD-8PT -L can receiv e po wer from a PoE or PoE+ switch. The 10/100/1000 PoE [...]

  • Page 17

    1-9 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel PoE-Capable Downlink Ports (Catalyst 2960C PD-8PT-L, 3560CG-8PC- S, 3560CPD-8PT-S, 2960C-8PC-L, 2960C-12PC-L, 3 560C-8PC-S, and 3560C-12PC-S) Depending upon the available PoE budget, these sw it ches can pow er other PoE-capable de [...]

  • Page 18

    1-10 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el • GLC-FE-100BX-U= • CWDM SFPs For information about SFP modules, see your SFP module documentation and the “Installing SFP Modules” section on page 2-31 . For cable specifications, see the “SFP Module Cables” section [...]

  • Page 19

    1-11 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel LEDs Y ou can use the switch system and port LEDs to monitor switch activity and performance. Switch Panel LEDs Figure 1 -8 Switc h LEDs 1 Mode button 5 SPD LED (speed) 2 SYST LED (system) 6 PoE LED 1 1. Applicable to switches with[...]

  • Page 20

    1-12 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el System LED Console LEDs The console LEDs show which console port is in use. See Figure 1-1 and Figure 1-2 for the LED locations. If you connect a cable to a co nsole port, the sw itch automatically uses that port for console comm[...]

  • Page 21

    1-13 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Modes for Port LEDs The port LEDs, as a g roup or individually , displa y information about the swi tch and abou t the individual ports ( Ta b l e 1 - 5 ). Port LEDs RJ-45 ports and SFP-module slots ha ve port LEDs. Th ese LEDs, as[...]

  • Page 22

    1-14 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el PoE LED Even if the PoE mode is no t selected, the LED sho ws PoE problems when they are det ected ( Ta b l e 1 - 8 ). The PoE LED is only on the switch es that support PoE. PD LED Applies only to the Catalyst 2960CPD-8PT -L and [...]

  • Page 23

    1-15 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Rear Panel Figur e 1 -9 Dual-Pur pose LEDs Rear Panel • A reset bu tton • A security slot • An A C power c onnector or a po wer adapter conne ctor • Heat sink f ins (Catalyst 3560CG- 8PC-S, 2960C-8PC-L, 2960C-12PC-L, 35 60C-8PC-S, and [...]

  • Page 24

    1-16 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Rear Panel Figur e 1 -1 1 Catalyst 3560CG-8PC-S S witch Rear P anel Internal Power Supply All switches excep t the Catalyst 2960CPD-8TT -L, 2960CPD-8PT -L, and 3560CPD-8PT -S are powered through their internal po wer supplies. The internal po[...]

  • Page 25

    1-17 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Management Options Security Slots The switches hav e security slots on the rear panel. Y ou can install an optional cable lock, such as the type that is used to secure a l apt op computer , to secure the switch. Figure 1-13 sho ws the slot on [...]

  • Page 26

    1-18 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Network Configurations • Cisco IOS CLI The switch CLI is ba sed on Cisco IOS s oftware and supports deskto p-switching feature s. Y o u can config ure and monitor the swit ch and switch cluste r members from the CLI. Y ou can access the CLI[...]

  • Page 27

    CH A P T E R 2-1 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 2 Switch Installation This chapter describes ho w to start your switch and ho w to interpret the po wer- on self-test (POST) that ensures proper operation. I t also describes ho w to install the switch. Read the topics and perform th e procedures in this ord[...]

  • Page 28

    2-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Preparing for Installation War ni ng Read the wall-mounting in structions carefully before beginning in stallation. Failure to use the correct hardware or to follow the correct pro cedures could result in a hazardou s situation to people an[...]

  • Page 29

    2-3 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Preparing for Installation War ni n g For connections outside the build ing where the equipment is installed, the following ports must be connected through an approved network termina tion unit with integral circuit protection: 10/100/1000 E[...]

  • Page 30

    2-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Powering the Switch • T emperature around the unit does not e xceed 113°F (45°C). If the switch is installed in a closed en vironment or in a multirack assembly , the temperature around it might be greater than nor mal room temperature.[...]

  • Page 31

    2-5 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Verifying Switch Operation Note Y ou can use both the u plink port and t he auxiliar y po wer adapter . Howe ver , the auxiliary power input takes preced ence. Catalyst 35 60CPD-8PT -S • Connect a 10/100/10 00 uplink port to a PoE+ sw itch[...]

  • Page 32

    2-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch On a Desk or Shelf (without Mounting Screws) Step 1 Locate the adhesiv e strip with the ru bber feet in the accessory kit. Step 2 Remov e the four rubb er feet from the adhesi ve strip, and attach them to the recessed ar[...]

  • Page 33

    2-7 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Figure 2-1 Installing the Mo unting Screws on T op of a Desk or a Shelf Step 3 Peel the adhesi ve strip of f the bottom of the scre w template, and attach it to the top of the desk or shelf. Step 4 Use a 0.144-inch (3.7 m[...]

  • Page 34

    2-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figur e 2-2 Mounting the S witch on T op of a Desk or Shelf After you mount the switch, see the “ After Installing the Switch” section on page 2-31 for info rmation about conf iguring the switch. Under the Desk- or S[...]

  • Page 35

    2-9 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Figure 2-3 Installin g the Moun ting Screws Under a Desk or Shelf Step 4 Use a 0.144-inch (3.7 mm) or a #27 d rill bit to drill a 1 /2-inch (12.7 mm) hole in the t hree screw template slots. Step 5 Insert three scre ws in[...]

  • Page 36

    2-10 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figur e 2-4 Mounting the Switc h Under a Desk or Shelf After you mount the switch, see the “ After Installing the Switch” section on page 2-31 for info rmation about conf iguring the switch. Wall-Mounting War ni ng [...]

  • Page 37

    2-11 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Step 1 Locate the scre w template. The template is used to ali gn the mounting scre w holes. Note Figure 2-5 sho ws the measurements for the loca tion of the screws on the switch. Step 2 Position the scre w template so t[...]

  • Page 38

    2-12 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figure 2-6 Installing th e Mounting Screws on the W all Figure 2-7 Installing th e Switc h on a W all Step 8 Place the switch onto the mo unting scre ws, and slide it do wn until it locks in place. See Figure 2-7 . CABL[...]

  • Page 39

    2-13 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch With a Mounting Tray The mounting kit (part number CMP-MGNT -TRA Y=) is optional. Y ou can order it when you or der your switch, or you can order it l ater from your Cisco representati ve. The mounting kit shi ps content[...]

  • Page 40

    2-14 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Step 4 Place the switch onto th e mounting scre ws, and slide the switch until it l ocks into place. See Figur e 2-9 . Figure 2-9 Installing th e Switc h on the Mount ing T ra y 1 Number-8 Phillips pan-head scr ews 3 De[...]

  • Page 41

    2-15 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Step 5 Use the two number -10 Phillips pan-head scre ws to secure the mounting tr ay to the switch. See Figure 2-10 . Figur e 2-1 0 Secur ing the Moun ting T ray to the S witch War ni n g T o prevent airflow restriction,[...]

  • Page 42

    2-16 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Step 1 Place the switch on the mounting tray . See Figure 2-11 . Figur e 2-1 1 Placing the S wit ch on the Mounting T ra y Step 2 Use the two number -10 Phillips pan-head scre ws to secure the mounting tr ay to the swit[...]

  • Page 43

    2-17 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch War ni n g Read the wall-mounting in structions carefully before beginning in stallation. Failure to use the correct hardware or to follow the correct p rocedures could result in a hazardous situation to p eople and dama[...]

  • Page 44

    2-18 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch In a Rack Installing the switch in a rack r equires an optional br acket kit that is not included with t he switch. Y ou can order these kits from your Cisco representat iv e: • 19-inch rack-mounting brackets (RCKMNT [...]

  • Page 45

    2-19 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Figure 2-15 sh ows ho w to attach a 23-inch bracket to one side of the switch. F ollo w the same steps to attach the second bracket to the opposite side. Figure 2-15 Attac hing the 23-inch Brack ets for Rack- Mounting Mo[...]

  • Page 46

    2-20 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch On a DIN Rail The DIN-mount kit (part number CMP-DIN- MNT=) is optional. Y ou can order it when you order your switch, or you can order it l ater from your Cisco representati ve. The DIN-mount kit contains: • T wo num[...]

  • Page 47

    2-21 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Step 2 Use the two number -10 Phillips pan-head scre ws to secure the DIN rail mount to the switch. See Figure 2-18 . Figur e 2-18 Secur ing the DIN- Mount T ray t o the Switc h Mounting the Switch on a DIN Rail Caution [...]

  • Page 48

    2-22 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figure 2-19 Mounting the Switch on a DIN Rail Step 2 Rotate the switch do wn towa rd the DIN rail until the release t abs on the DIN rail mount clicks. Step 3 Lift lightly on t he bottom of the switch to ensure that it [...]

  • Page 49

    2-23 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Removing the Switch from a DIN Rail Step 1 Ensure that power i s remov ed from the switch, and disconnect all cables and connectors from the front panel of th e switch. Step 2 Pull do wn on the DIN rail mount rel ease ta[...]

  • Page 50

    2-24 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing a Cover for t he Reset Button (Optional) Installing a Cover for the Reset Button (Optional) Y o u can cov er the reset button to prev ent accidental or unauthorized reset of your switch. T o install a cov er on the reset button:[...]

  • Page 51

    2-25 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Installing the Power Cord Retainer (Optional) Installing the Power Cord Retainer (Optional) Note This section applies to sw itches with an A C po wer connector . The power cor d retainer part number (PWR-CLP=) is optional. Y ou can order it[...]

  • Page 52

    2-26 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing the Po wer Cord Retain er (Optional) Step 3 Slide the retainer throu gh the first l atch. See Figure 2-24 . Figure 2-24 Sliding the Re tainer Thr ough the Latch Step 4 Slide the retainer throu gh the other latches to lock it. Se[...]

  • Page 53

    2-27 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Installing the Power Cord Retainer (Optional) Figure 2-26 Sleeve Around the P ower Cord Step 6 Secure the A C po wer cord by pressing on the retainer . See Figure 2-27 . Figur e 2-27 Secur ing the Po wer Cord in the Retainer 1 Slee ve for t[...]

  • Page 54

    2-28 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing the Cabl e Guard (Optional) Installing the Cable Guard (Optional) The cable guard pre vents tampering with the cables after the cables are installed. The cable guard (CMP-CBLE-GRD=) is not included with the swi tch, but you can [...]

  • Page 55

    2-29 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Installing the Cable Guard (Optional) Step 2 Use the supplied number -10 pan-head scre ws to attach the cable guard to the switch. See Figure 2-29 . Figure 2-29 Attac hing the Ca ble Guard t o the Switc h Step 3 Loosen the number -10 Philli[...]

  • Page 56

    2-30 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing the Cabl e Guard (Optional) Figure 2-31 Attac hing the Cables to the S witch Step 4 Guide the connected cables through th e slots in the front of the cable guard. Slide the c able guide in as sho wn in Figure 2-33 . T ighten the[...]

  • Page 57

    2-31 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation After Installing the Switch Step 5 (Optional) T o attach the cable guard t o the desk or wall , use a 0.144-inch (3.7 mm) or a #27 drill b it to drill 1/2-inch (1 2.7 mm) holes at each of the tw o mounting locations. Insert the supplied 0.5[...]

  • Page 58

    2-32 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Removing SFP Modules War ni ng Class 1 laser product. Statement 1008 Step 1 Attach an ESD-pre venti ve wrist strap to your w rist and to a bare metal surf ace. Step 2 Find the send (TX) and recei ve (RX) markings on the module top. On some[...]

  • Page 59

    2-33 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports Figure 2-35 Removing a Bale -Clasp Latc h SFP Module Connecting Devices to the Ethernet Ports • Connecting to the 10/10 0 and 10/100/1000 Port s, page 2-33 • Connecting to the PoE Ports, pag e 2[...]

  • Page 60

    2-34 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Connecting Devices to the Eth ernet Ports Figur e 2-36 Connecting to an Ether net P ort Connecting to the PoE Ports The 10/100 PoE ports ha ve the same autoneg otiation settings and cabl ing requirements as those in the “Connecting to th[...]

  • Page 61

    2-35 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Where to Go Next restricted access location and users and service people wh o are authorized within the re stricted access location are made aware of the haza rd. A restricted access area can be accessed only throu gh the use of a special t[...]

  • Page 62

    2-36 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Where to Go Ne xt[...]

  • Page 63

    CH A P T E R 3-1 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 3 Troubleshooting • Diagnosing Problems, page 3- 1 • Resetting the Switch, page 3-5 • Finding the Switch Serial Number , page 3-5 Diagnosing Problems The switch LEDs pro vide troubleshooting informati on about the switch. The y sho w POST f ai lu re s,[...]

  • Page 64

    3-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Diagnosing Prob lems Switch LEDs Look at the port LEDs informat ion when troublesh ooting the switch. See th e “LEDs” section on page 1-12 for a description of the LED colors and thei r meanings. Switch Connections Bad or Damaged Cable Alway[...]

  • Page 65

    3-3 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 3 Troubleshooting Diagnosing Problems 10/100 and 10/100/100 0 Port Connections A port appears to malfun ction: • V erify the status of all po rts. See T able 1-7 on page 1-14 for descriptions of the LEDs and their meanings. • Use the show interfaces pri vileg[...]

  • Page 66

    3-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Diagnosing Prob lems Spanning Tree Loops STP loops can cause serious perfor mance issues that look lik e port or interface pr oblems. A unidirectional link can cause loops. It occurs when the traf fic sent b y the switch is receiv ed by the neig[...]

  • Page 67

    3-5 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 3 Troubleshooting Resetting the Switch Resetting the Switch Note Resetting the switch reboots the swi tch. T o reset the switch: 1. At the switch prompt, enter ena ble , and press Return or Enter . 2. At the Pri vileged EXEC prompt, switch #, enter setup and pres[...]

  • Page 68

    3-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Finding the Swit ch Serial Number Figure 3-2 Serial Number Locati on f o r the Catalyst 3560CG-8PC-S, 3560CG-8PC-S , and the 3560CG-8TC-S Figur e 3-3 Serial Number Location f or the Catalyst 35 60CPD-8PT -S Switc h MODE SPD PoE DPLX STA T SYST 1[...]

  • Page 69

    3-7 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 3 Troubleshooting Finding the Switch Serial Number Figur e 3-4 Serial Number Locati on f or the Catalyst 29 60C-8TC-L, 2960C-8TC-S, 2960C-8PC-L, 2960C-12PC-L, 3560C-8PC-S, and 3560C-12PC-S Switches E S PD PoE DPLX S TAT S Y S T 1 2 3 4 5 6 7 8 2 1 CON S OLE 1 2 1[...]

  • Page 70

    3-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Finding the Swit ch Serial Number[...]

  • Page 71

    A-1 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 APPENDIX A Technical Specifications T able A -1 Environmental and Ph ysical Specific ations for the Catalyst 356 0-C and 2960-C Swi tch e s Environmental Ranges Operating temperature Catalyst 2960CPD-8TT -L Catalyst 2960CPD-8PT -L Catalyst 2960 C-8TC-L Catalyst 2960 C-8TC[...]

  • Page 72

    A-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix A Technical Specific ations Phy sical Specifications W eight Catalyst 2960CPD-8TT -L Catalyst 2960CPD-8PT -L Catalyst 2960 CG-8TC-L Catalyst 2960 C-8TC-L Catalyst 2960 C-8TC-S Catalyst 2 960C-8PC-L Catalyst 2960 C-12PC-L Catalyst 3560 CG-8PC-S Catalyst 3560 CG-8[...]

  • Page 73

    A-3 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix A T echnical Specifications T able A -2 Cata lyst 3560-C and 2960-C Switch Specifications Po wer Requirements A C input voltage 100 to 240 V A C (autoranging) • Catalyst 2960CPD-8TT -L: 0.2 to 0.13 A, 50 to 60 Hz • Catalyst 2960CPD-8PT -L: 0.5 to 0.25 A, 50 t[...]

  • Page 74

    A-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix A Technical Specific ations Pow er consumption 1 • Catal yst 2960CPD-8TT -L: 15 W , 51 BTUs per hour (A C) 14.5 W , 50 BTUs per hour (DC PD) • Catalyst 2960CPD-8PT -L: 44 W , 74 BTUs per hour (A C) 43 W , 70 BTUs per hour (DC PD) • Catalyst 2960CG-8TC-L: 1[...]

  • Page 75

    A-5 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix A T echnical Specifications T able A -3 P oE Po wer Consumption Switch Consumption without PoE Consumption with PoE Available PoE Catalyst 2960CPD-8PT -L 14.5 W 43 W 1 51 W 2 22.4 W 1 30.8 2 1. Require s both the up link ports to be connected to PoE+ inputs. 2. R[...]

  • Page 76

    A-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix A Technical Specific ations[...]

  • Page 77

    B-1 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 APPENDIX B Connector and Cab le Specifications • Connector Specif ications, page B-1 • Cables and Adap ters, page B-3 Connector Specifications • 10/100 and 10/100/1 000 Ports, page B-1 • SFP Module Connectors, page B-2 • Dual-Purpose Ports, page B-2 • Cables a[...]

  • Page 78

    B-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix B Connec tor and Cable Specific ations Connector Specifications Figure B-2 1 0/ 1 00/1000 Port Pinouts SFP Module Connectors Figure B-3 Fiber -Optic SF P Module L C Connector War ni ng Invisible laser radiation may be emitted from disconnected fi bers or connect[...]

  • Page 79

    B-3 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix B Connect or and Cable Specifications Cables and Adapters Cables and Adapters • SFP Module Cables, page B-3 • Cable Pinouts, page B-4 • Console Port Adapter Pinout s, page B-5 SFP Module Cables Each port must match the wa ve -length specif ications on each [...]

  • Page 80

    B-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix B Connec tor and Cable Specific ations Cables and Adapters Note When the fiber -optic cable span is less than 15.43 miles (25 km), in sert a 5-decibel (dB) or 10 -dB inline optical attenuator between the fi ber-optic cable plant and the recei ving port on the 10[...]

  • Page 81

    B-5 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix B Connect or and Cable Specifications Cables and Adapters Figur e B-8 Four T w isted-P air Cro ssov er Cable Schem atics for 1 0 00BASE-T P orts T o identify a crosso ver cable, hold the cable ends side-b y-side, with the tab at the back. The wire connected t o p[...]

  • Page 82

    B-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix B Connec tor and Cable Specific ations Cables and Adapters Ta b l e B - 3 lists the pinouts for the switch console port, RJ-45-to-DB-25 female DTE adapter , and the console device. Note Th e RJ-45-to-DB-25 female DTE adapter is not su pp lie d wi th th e sw itc [...]

  • Page 83

    C-1 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 APPENDIX C Configuring the Switch with the CLI Setup Program This appendix provides a command-line interface (CL I) setup procedure for a standalone sw itch. T o set up the switch by using Express Setup , see the Catalyst 3560-C an d 2960-C Switc h Getting Started Guide .[...]

  • Page 84

    C-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Figure C-1 Connecting the Cons ole Cable Step 3 Configure the baud rate and character format of the PC or terminal to match th e console port characteristics: • [...]

  • Page 85

    C-3 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Accessing the CLI Through the Console Port USB Mini-Type B Console Port Step 1 If you are connecting the switch USB-mini console por t to a W indows-b ased PC for the first time, in stall a USB driv er . See Fi[...]

  • Page 86

    C-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Step 4 Start the ter minal-emulation program on the PC or the terminal. The program, frequentl y a PC application such as HyperT erminal or ProcommPlus, make s com[...]

  • Page 87

    C-5 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Accessing the CLI Through the Console Port Installing the Cisco Microsoft Windows 2000 USB Driver Step 1 Obtain the f ile Cisco_usbconsole_dri ver .zip from Cisco.com, and unzip it. Note Y ou can do wnload the [...]

  • Page 88

    C-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Uninstalling the Cisco Microsoft Windows USB Drivers Uninstalling the Cisco Microso ft Windows XP and 2000 USB Driver Y o u can uninstall the dr iv er by using the[...]

  • Page 89

    C-7 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Entering the Initial Configuration Information Step 4 When the Remov e the Program window appears, click Rem ove . Note If a User Account Control warnin g appears, click Allow - I trust this pr ogr am to procee[...]

  • Page 90

    C-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Entering the Initial Con figuration Information Step 3 Enter an ena ble secret pas sword, and pr ess Return . The password can be fro m 1 to 25 alphanumeric charac ters, can st art with a number , is case se[...]

  • Page 91

    C-9 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Entering the Initial Configuration Information ! interface FastEthernet1/0/2 interface FastEthernet1/0/3 ! ...<output abbreviated> end Step 10 These choices appear: [0] Go to the IOS command prompt withou[...]

  • Page 92

    C-10 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Entering the Initial Con figuration Information[...]