Cisco Systems OL-6244-01 manual

Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catalyst 650 0 Series S w itc h Command Reference R ele ase 8 .4 Text Par t Numb er: OL- 6244- 01[...]

THE SPECIFICATIONS AND INFORMATION REG ARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOU T NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPON SIBILITY FOR THEIR AP PLICATION OF ANY PRO[...]

iii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 CONTENTS Preface xx ix Audienc e xxix Organi zation xx ix Relat ed D ocum ent atio n xxix Conv enti ons xxx Obtain ing Documentati on xxxi Cisco. com xxxi Orderi ng Documenta tion xxxi Document ation F eedback xxxi Obtain ing Technical As sistance xxx ii Cisco Te chnical Sup[...]

Cont ents iv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 clear ba nne r mo td 2-12 clea r bo o t au to -c onf ig 2-13 clea r bo o t de vi ce 2-14 clea r bo o t sy st em 2-1 5 clea r ca m 2-16 clea r ca m mon itor 2-17 clear ca m no ti fic a tion 2-18 clear chan nel st atisti cs 2-1 9 clea r co n fi g 2-20 clear config[...]

Content s v Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 clear l acp-channe l statis tics 2-53 clear lda 2-5 4 clear loca lus er 2-56 clear log 2-5 7 clea r log com mand 2-58 clear logg ing buf fer 2-59 clear logg ing cal lhome 2-60 clear l oggi ng ca llhome from 2-62 clear l oggi ng ca llhome reply- to 2-6 3 clear logg in[...]

Cont ents vi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 clea r po r t co ps 2-95 clea r po r t ho st 2-96 clea r po r t qo s au to qos 2-97 clea r po r t qo s co s 2-9 8 clea r po r t se cu ri ty 2-99 clear po rt vla n-m a pp in g 2 -101 clear pv lan ma pp in g 2 -102 clea r qo s acl 2-103 clea r qo s aut oq o s 2-10[...]

Content s vii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 clea r snm p g rou p 2-139 clear snm p ifa lias 2-1 40 clear snm p in form 2-141 clea r snm p n otif y 2-142 clea r snm p t arge tad dr 2 -143 clea r snm p t arge tpara ms 2-1 44 clea r snm p t rap 2-14 5 clea r snm p u ser 2-1 46 clea r snm p v iew 2-147 clear s p[...]

Cont ents viii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 clea r vt p sta tis tics 2-180 commit 2-181 commit lda 2-183 confi gure 2-184 confre g 2-186 contex t 2-188 copy 2-190 delet e 2-198 dev 2- 199 dir— ROM moni tor 2-20 0 dir— swi tch 2-201 disa ble 2-203 discon nect 2-204 down load 2-205 enab le 2-209 forma[...]

Content s ix Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set acco unting connect 2-241 set acco unting exec 2-242 set acco unting suppres s 2-244 set acco unting system 2-245 set acco unting update 2- 247 set ac l log ratelim it 2-248 set a cl m ac- packe t-cl assi fy 2 -249 set a lias 2-25 0 set arp 2-251 set auth entica[...]

Cont ents x Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set cops 2-30 0 set cr y pt o ke y rs a 2-302 set d efa ult portstat us 2-303 set d hcp -snooping 2-304 set d o t1 q-all-tagge d 2 -306 set dot1x 2- 307 set e nab lepass 2-312 set er rdis abl e-ti meou t 2-313 set e rr ordet ect ion 2-315 set fan- tray-versi on 2[...]

Content s xi Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set ip alia s 2-353 set ip dns 2-354 set ip dn s domain 2-355 set ip dn s server 2-356 set ip fr agmentation 2-357 set ip ht tp port 2-358 set ip ht tp server 2-359 set ip per mit 2 -360 set ip re direct 2-36 2 set ip ro ute 2-363 set ip unr eac hable 2- 365 set ke [...]

Cont ents xii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set lo ggin g lev el 2-397 set log ging server 2-400 set log ging session 2-402 set lo g ging telnet 2-403 set lo ggin g t imest amp 2-404 set lo gou t 2-405 set m acr o ci scos mart port s 2-406 set mls ag ingtime 2-4 07 set m ls b ridg ed-flo w- stat isti cs [...]

Content s xiii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set pass word 2-448 set pbf 2-449 set pbf ar p-inspecti on 2 -451 set pb f cl ient 2-452 set pb f gw 2- 454 set pbf- map 2-456 set pb f vl an 2-45 9 set p oll 2 -460 set p ort a rp- insp ecti on 2-461 set port auto-mdix 2-463 set po rt auxiliaryvl an 2-46 5 set po[...]

Cont ents xiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set po rt n am e 2-512 set po rt n ego tiat ion 2-513 set po rt p rot oco l 2-514 set po rt q os 2-51 6 set po rt q os auto qos 2-518 set po rt q os cos 2-5 20 set po rt q os poli cy-s ource 2-521 set po rt q os trus t 2-523 set po rt q os trus t-de vic e 2-525[...]

Content s xv Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set qo s dr op-threshol d 2-571 set qos ds cp-cos-map 2 -573 set qo s ds cp-mutatio n- m ap 2-574 set qos ds cp-mutatio n- table-ma p 2-575 set qo s ds cp-rewrite 2-576 set qos i pprec -ds cp-map 2-577 set qos m ac- cos 2-579 set qos m ap 2-5 80 set qos po liced-dsc[...]

Cont ents xvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set se cur ity acl f eat ure ra teli mit 2-6 23 set s ecurity acl ip 2-624 set s ecurity acl ip x 2-630 set s ecurity acl lo g 2-633 set s ecurity acl mac 2- 635 set s ecurity acl map 2- 638 set se cur ity acl st atis tics 2-6 41 set snmp 2-642 set sn mp acc es[...]

Content s xvii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set s pan tree enable 2-686 set sp ant ree fwd del ay 2-688 set sp an tree global-d efault 2-690 set s pan tree guard 2-692 set s pan tree hello 2-694 set sp ant ree link -typ e 2-696 set spant ree ma cred uct ion 2-69 7 set span tree maxage 2-69 8 set spant ree m[...]

Cont ents xviii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set syst em highavailab ility 2-741 set syst em highavailab ility ver sioning 2-74 2 set s yst em info-log 2-744 set s yst em location 2-746 set syst em modem 2-747 set syst em name 2-748 set syst em profile 2- 749 set syst em supervisor- update 2-751 set sy [...]

Content s xix Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show acc ounti ng 2-794 show acll og 2-797 show acl mac- pac ket- class ify 2-798 show acl merg e alg o 2 -799 show alias 2 -800 show arp 2-801 show aut henti cati on 2-802 show auth oriza tio n 2-803 show autos hut 2-804 show banne r 2-805 show boot 2-806 show boo[...]

Cont ents xx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show dhcp- snooping confi g 2-859 show dhcp- snooping st at istics 2-8 60 show dot1q -all-tagge d 2-861 show dot1x 2-862 show dvla n statistics 2-866 show envi ronment 2-867 show errd isable-time out 2-873 show erro rdetection 2-875 show fabr ic channel 2 -876 s[...]

Content s xxi Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show ip ht tp 2-91 8 show ip pe rmi t 2-920 show ip r oute 2-92 2 show kerb eros 2- 924 show l2pr otocol- tunnel statist ics 2 -926 show lacp -chan nel 2-928 show lcpe rroract ion 2-932 show lda 2 -933 show loca luser 2-937 show log 2 -938 show log co mmand 2-9 41 [...]

Cont ents xxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show mls net flow-ro ute 2-987 show mls pbr -route 2-9 88 show mls s tat istic s 2-989 show mls ver ify 2-994 show modul e 2-995 show modu leinit 2- 998 show msfcau tostat e 2-100 0 show msm aut ostate 2-1001 show mult icas t gr oup 2-100 2 show multi cast gro[...]

Content s xxiii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show port dot1q-et hertype 2-10 63 show port dot1qtun nel 2-1064 show por t do t1x 2-106 5 show port errd isab le-tim eo ut 2- 1067 show port errordet ection 2-10 69 show port flowcontr ol 2-107 0 show port inlinep ower 2-107 2 show port jum bo 2-1075 show port l[...]

Cont ents xxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show pvla n capability 2-1125 show pvla n mapping 2-1127 show qos acl editbuf fer 2-11 29 show qos acl info 2-1130 show qos acl map 2-1132 show qos acl resou rc e-usage 2 -1134 show qos br idged-microf low-po licin g 2-1135 show qos in fo 2-1136 show qos mac- [...]

Content s xxv Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show snmp acce ss- list 2-11 88 show snmp buf fer 2 -1189 show snmp commu nity 2-1190 show snmp co ntex t 2-1192 show snmp cou n ters 2-1193 show snmp eng ineid 2-1197 show snmp gro up 2-1 198 show snmp if alias 2-1200 show snmp inf orm 2-120 1 show snmp not ify 2-[...]

Cont ents xxvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show ssh 2-1254 show star tup- con fig 2- 1255 show summerti me 2-1258 show syst em 2-1259 show syst em health 2- 1263 show syst em highavai labil ity 2-126 5 show syst em info-log 2-1266 show syst em profil e 2-1267 show syst em sanity 2- 1268 show syst em su[...]

Content s xxvii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 sta ck 2-1318 switc h 2-1319 swit ch consol e 2-1320 swit ch fabri c 2-1321 sync 2-13 22 sysret 2-1323 tclqui t 2-1324 tclsh 2-1 325 telnet 2-1326 test c abl e-di agn osti cs 2 -1327 test snmp trap 2 -1329 tracer oute 2-1330 unalia s 2-13 33 unde lete 2-1334 unse[...]

Cont ents xxvii i Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01[...]

xxix Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Preface This pr efa ce d escri b es t he a udie nce, o rganizatio n, an d co nv en tion s o f thi s pu bli cati on and p rovid es information on how to obtain relate d documentation. Audience This pu bli cat ion is fo r experi ence d network ad mini str ator s who a re r es[...]

xxx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Preface Conv entions • A TM Software Configuration Guid e and Com mand Re ference for the Catalyst 5000 F amily a nd 6500 Series Switches • Release Notes for Catalyst 6500 Series For information about M IBs, refer to this URL: http://www .cisco.co m/public/sw-cen ter[...]

xxxi Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Pre face Obtaining Docume ntation Obtaining Documentation Cisco d ocume nta tio n an d a dd ition al lite rat ure a re available on Ci sco. co m. Cisco al so pr ovides s ev eral ways to obtain tec hnic al assist anc e an d other te chni cal re source s. These sec ti ons exp[...]

xxxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Preface Obtain in g Technical Assis ta nce Obtaining Tech nical Ass istanc e For all customers, par tners, re sellers, and distributors who h old valid Cisco service c ontra cts, Cisco T ec hnic al Support provides 2 4-hour-a-d ay , awar d-wi nn ing te chni cal assi st[...]

xxxii i Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Pre face Ob ta ining Additional Publications and Information Definitions of Service Request Severity T o ensure th at all servi ce request s are report ed in a stand ard format , Cisco has established se ver ity def init ions . Se verity 1 (S1 )—Y our net work is “ d[...]

xxxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Preface Obtainin g Addi ti ona l Publicat io ns and Info rmatio n • Int ernet Pr otoc ol J ournal is a quarte rly journa l published by Cisco Systems for engin eering professiona ls i nv olved in desi gn ing, developing, and o pe ratin g p ublic and pr iv a te inte r[...]

C HA PTER 1-1 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 1 Command-Line Interface s This chapt er desc ribes the c ommand- line inte rfaces (CL I) av ailab le on the Catal yst 6500 seri es switches and co ntains t hese s ectio ns: • Switch CLI, page 1-1 • R OM Monit or CLI, page 1-17 For inform ation regar ding th e[...]

1-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Accessing the Switch C LI via the Console Port (EIA/TIA- 232) T o access the switch throu gh the conso le (EIA/TIA- 232) port, perform these s teps: Step 1 From th e Ci sco Sy stem s Co nsole prom[...]

1-3 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Operating the Switch CLI This secti on describe s command modes and functions tha t allow you to operate the switch CLI. Accessing the Command Mo des The CLI has t wo modes of operat ion: no rmal[...]

1-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Using the Command-Line Editing Features Catalyst 650 0 seri es swit ch s oft ware i ncl udes an enha nce d e diti ng mode tha t p rovides a set of e dit ing ke y f u nc tions similar to those of t[...]

1-5 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI In the follo wing e xample, when you enter the letter s conf and press the Ta b ke y , the system provides the comp lete comm and: Console> (enable) conf<Tab> Console> (enable) config[...]

1-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Deleti ng Entrie s Perform on e of thes e tasks to delete command e ntries if you make a mistake or chan ge your mi nd: Scrolling Down a Line or a Screen When you use th e help facilit y to l ist [...]

1-7 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Redisplayi ng the Current Command Line If you ente r a comma nd and the syst em suddenl y sends a message to your scre en, you can recall you r curr ent co mman d line en tr y . T o do so, perf o[...]

1-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Using Command Aliases Like regular com mands , alia ses are no t case se nsitive. Ho we ver , unlike regular command s, some aliases cannot be abbreviat ed. See Ta b l e 1 - 2 for a list of switch[...]

1-9 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Accessing Command He lp T o see a list of top-le vel comma nds and comm and cate gori es, type help i n norma l or p ri vileg ed mo de. Context-sensit ive help (usage and synt ax inf orma tio n) [...]

1-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI session Tunnel to ATM or Router module set Set commands, use 'set help' for more info show Show commands, use 'show help' for more info slip Attach/detach Serial Line IP inter[...]

1-11 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Y ou c an designa te por ts by entering t he modu le and port num ber p airs, separa ted by com mas. T o specif y a rang e of po rts, use a d as h ( -) bet wee n the mo dule n umb er and po rt n[...]

1-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Using Command Self-Repeat Use the com mand self -r epea t functi on to display matches to all possible keywords if a st ri ng repres ents a unique match. If a unique match is not found, the longe[...]

1-13 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Using the CL I String Search The pat tern in the comm and output is refer red to as a str ing. The CLI str ing search featu re allo ws you to sear ch or fil ter a ny show or mor e command out pu[...]

1-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI T o enter th ese spe cial char acters as sing le-cha racter pattern s, remo ve the spec ial meaning b y prece ding each ch aracter with a backsl ash (). These e xample s are s ingle-cha racte r [...]

1-15 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Multiple- Character Pat terns When crea ting re gular e xpressions, you c a n also specify a p attern co ntaining multip le charac ters. Y ou creat e mul tipl e-ch arac ter r egular expr essio n[...]

1-16 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI T o use multiplier s with multiple-char acter patterns, you encl ose the pattern in parenth eses. In the follo wing example, the pattern matches an y number of the multiple -character st ring ab:[...]

1-17 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s ROM Moni tor CLI For exam pl e: _1300_ matc hes an y stri ng that has 1300 some where i n the s trin g. The string’ s 1300 ca n be prec eded b y or end with a spa ce, br ace, or comm a. For examp le: {13[...]

1-18 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands ROM Moni to r CLI The manu al bo ot command ha s the following syntax: Note En te r t he copy file-id { tftp | flash | fil e- id } co mma nd to obt ai n an ima ge f ro m t h e ne twork . • boot — Boot f[...]

C HA PTER 2-1 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 Catalyst 6500 Series Switch and ROM Monitor Commands This chap ter co ntain s an alpha betica l listin g of all switc h and R OM monitor comman ds a v ail abl e on the Catalyst 6500 series switches. For inform at ion r egardin g A TM modu le- rel ate d co mma nd[...]

2-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands alias alias T o set and display command aliases, use the alias command. alias [ name = value ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes R OM moni tor comm and[...]

2-3 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s alias k=stack s=set rommon 4 > s PS1=rommon ! > BOOT=bootflash:RTSYNC_llue_11,1;slot0:f1,1; ========================================================================= Relat e d Commands unalias[...]

2-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands boot boot T o b oot up an extern al proc es s, use t he boot co mman d. boot [ -x ] [ -v ] [ device : ][ imagename ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes [...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands cd 2-5 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 cd T o s et the default Fla sh device for t he sy stem , use t he cd comm and. cd [[ m/ ] de vice : ] Syntax Descript ion Defaults The de fault Flash device is bootfl ash. Comma nd T ypes Swit ch co mman[...]

2-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear acl lo g clear acllog T o disable A CL log rate limiting, use the clear ac llog command. clear ac llog Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords. Defaults Thi s command has[...]

2-7 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear a cl mac-pac ket-cl assify clear acl mac-p acket-c lassify T o match only MA C packets with MA C A CLs, use the clear ac l mac- packet -cl assi fy command. clear ac l mac-pack et-cla ssify { vlans | [...]

2-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear alias clear alias T o clear the ab bre viated ve rsions of com mands, us e the clea r alias comm and. clea r alias { name | all } Syntax D escr i pti on Defaults Thi s command has no de fa ult set ting[...]

2-9 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r ar p clear arp T o delete a specif ic entry or all entries from the ARP table, use the cl ear arp comman d. clea r arp [ al l | dynamic | perm an ent | static ] { ip_ addr } Syntax Descript ion Defa[...]

2-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear arp Relat e d Commands set arp show arp[...]

2-11 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r au to sh ut clear autoshut T o clear the runt im e counters or re set the automatic module shut down settings to the d efault settings, use the cle ar autoshut command. clear aut oshut {{ count e r[...]

2-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear bann er motd clear banner motd T o cl ear the me ssag e-of- the -day ba nner, use the clear banner motd command . clear banne r motd Syntax D escr i pti on This c omm and ha s no a rgument s o r keywo[...]

2-13 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r boot au to-conf ig clear boot auto-conf ig T o clear the conte nt s of the CONFIG_ FILE envir onmen t vari able u sed to speci fy th e config ura tion f iles used during boo tup, use the cl ear boo[...]

2-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear boot dev ice clear boot device T o clear the conten ts of th e CONFIG _FILE enviro nment variabl e used to specify t h e NAM s tartup configuratio n files, use the clea r boot device comma nd . clear [...]

2-15 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r boot system clear boot system T o cl ear the co nt ents of the B OOT e nvir onmen t vari abl e a nd the conf i gurat ion re giste r sett ing, u se t he clear boo t syste m command. clear boot syste[...]

2-16 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cam clear cam T o delete a specif ic entry or all entries from the CAM table, use the cl ear cam command . clear ca m mac _addr [ vl an ] clear ca m { dyn am ic | sta tic | permanent } [ vl an ] Synta[...]

2-17 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r cam monit or clear cam monitor T o clear th e config uration f or the MA C-addre ss limits and a ctions, use th e clear cam monito r co mmand . clear cam monit or { all | mod/port | vl an } clear c[...]

2-18 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cam no tificat io n clear cam notification T o clear th e CAM notif icati on counter s and hi story log, use the cl ear cam notif ication comman d. clear ca m notif ication { all | counters | history [...]

2-19 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear channel st atisti cs clear channel sta tistics T o clear P AgP statistica l inform ation, use t he clear channel statistics comm and. clear cha nnel statisti cs Syntax Descript ion This c omm and ha[...]

2-20 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g clear config T o clear the system or module conf iguration information stored in NVRAM, u se the clear c onfig comm and. clear co nfi g { all [ factor y-def aults ] | mod | acl nvram | interf[...]

2-21 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear config This exam ple shows how to de lete the configura tio n in for matio n stored in NVR AM on modu le 1 (the superv isor en gine): Console> (enable) clear config 1 This command will clear modu[...]

2-22 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g checkp oint clear confi g checkpoint T o clear all checkp oint co nfiguration files or a parti cular configura tion che ckpoin t fi le, use the clear conf ig checkpoint command. clear conf ig[...]

2-23 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear config pv lan clear config pvlan T o cle ar all priv ate VL AN configurat ions in the syst em inclu ding port mappings, use the c lea r con fig pvlan comm and. clear co nfi g pvlan Syntax Descript i[...]

2-24 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cops clear cops T o cl ear Comm on Op en Po licy Se rvi ce ( CO PS) co nfigurat ions, us e t he c lea r cops command . clear co ps roles ro l e 1 [ ro l e 2 ]... clear co ps all-rol es clear cops ser [...]

2-25 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r co ps This e x ample sho ws how to clea r all COPS serv ers: Console> (enable) clear cops server all All COPS servers cleared. Console> (enable) This example shows how to cle ar a sp ecific C[...]

2-26 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear coun ters clear counters T o cle ar MAC counters, Ethe rCh annel MAC counters, por t count ers, a nd th e cha nnel tra ff ic percen til e, use the clea r counters co mmand. clear co unters all clea r [...]

2-27 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r count ers Exam ples Th is example shows ho w t o reset MAC and port counte rs to zero: Console> (enable) clear counters This command will reset all MAC and port counters reported in CLI and SNMP[...]

2-28 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cry pto key rsa clear crypto key rsa T o remov e all RSA public-ke y pairs, use the c lear crypto k ey rsa command . clear cry pto k ey rsa Syntax D escr i pti on This c omm and has n o keywords or a [...]

2-29 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear d hcp-snoop ing bindi ngs clear dhcp-sno oping bind ings T o cle ar D HCP sn oop ing bindin g ta ble ent ries, use t he clear dhcp-snooping bindings co mman d. clear dhcp-snooping bindings [ ip_add [...]

2-30 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear dhcp -snoo pin g bindings Relat e d Commands show dhcp-snooping bindings[...]

2-31 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear dhcp-snoo ping statistics clear dhcp-sno oping statisti cs T o clear DHCP snooping statistics, use the cl ear dhcp-sn ooping st atisti cs comm and. clear dhcp-snooping statistics Syntax Descript ion[...]

2-32 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear dot 1x config clear dot1x config T o disable 8 02.1X on a ll ports and retur n v alues to th e defa ult settin gs, use th e clear dot1 x conf ig comm and. clear dot 1x conf ig Syntax D escr i pti on T[...]

2-33 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r dot1x vla n-group clear dot1x vlan-gro up T o cl ear a VL AN fr om a VLA N g rou p, use th e clear dot1 x vlan-gr oup command . clear dot 1x vlan- gr oup { all | vlan_g r ou p_name [ vla n | all ]}[...]

2-34 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear dot 1x vlan-g roup Relat e d Commands set dot1x show dot1x[...]

2-35 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ftp clear ftp T o clea r File T ransf er Prot ocol ( FTP) paramete rs, use the clear ftp comman d. clear ft p [ username | password ] Syntax Descript ion Defaults Thi s command has no de fa ult set [...]

2-36 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear gmrp s tatistic s clear gmrp statistics T o clear all the GMRP stati s tics infor ma tion f rom a specif ied VLAN or all VLA Ns, use th e clear gmrp statistics command. clear gmr p statistics { vlan |[...]

2-37 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear gvrp stati stics clear gvrp s tatistics T o clear all the GVRP statis tics info rmation , use the clea r gvrp statistics comma nd. clear g vrp st ati st i cs { mo d/port | all } Syntax Descript ion [...]

2-38 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear igmp stat is ti cs clear igmp statistics T o cl ear IGMP snoopi ng stati sti cal in form a tion, use the clear igmp statistics command . clear ig mp stat istics Syntax D escr i pti on This c omm and h[...]

2-39 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ip alias clear ip alias T o clear IP al iases that were s et using the set ip alias command , use the clear ip alias command . clear ip alias { name | all } Syntax Descript ion Defaults Thi s comman[...]

2-40 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ip dn s domai n clear ip dns domai n T o clear the de fault DNS domain na me, use the cle ar ip dns domain command. clear ip dns domain Syntax D escr i pti on This c omm and ha s no a rgument s o r ke[...]

2-41 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ip dns server clear ip dns server T o remov e a DNS server from the DNS serve r listing, use the clea r ip dns serv er comman d. clear ip dns serv er { ip_ad dr | all } Syntax Descript ion Defaults [...]

2-42 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ip pe rm i t clear ip permit T o remov e a specifi ed IP address and mask or all IP addresses and masks from the permit list, use the clear ip permit comman d. clear ip permit al l clear ip permit { i[...]

2-43 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ip pe rmi t Console> (enable) clear ip permit all IP permit list cleared. WARNING IP permit list is still enabled. Console> (enable) Relat e d Commands set ip permit show ip per mit[...]

2-44 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ip ro ute clear ip route T o delete IP routi ng table entries, use the clear ip r oute command . clear ip r oute destination gat eway Syntax D escr i pti on Defaults The defau lt is destination . If t[...]

2-45 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear k erberos cli ents mandatory clear kerberos clients man datory T o disable mandatory Kerb eros authentica tion for services on the network, use the clear k erber os clients mandatory comm and. clear[...]

2-46 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros cre den tials fo rward clear kerberos credentials forward T o disa ble credent ials forw ardi ng, use t he clear ke rbero s credent ials f orward com mand. clear ke rber os cr edential s fo [...]

2-47 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ke rberos creds clear kerberos creds T o de lete all t h e K erberos cr edentials , use t h e c lear kerbe ros cr eds command. clear ke rbero s creds Syntax Descript ion This c omm and ha s no a rgu[...]

2-48 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros rea lm clear kerberos realm T o clea r a n en try t hat m aps the n ame of a K er beros rea lm to a D NS do main na me or a h ost name , us e the clea r ke r b eros rea lm command. clea r k [...]

2-49 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ker ber os se rv er clear kerberos server T o clea r a s pecifi ed Ke y Distrib ution Center (KDC) entry , use the clea r kerbe ros serv er command. clear k erb eros s erver ke rberos_realm { host n[...]

2-50 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear key conf ig-ke y clear key config-key T o remo ve a pr i v ate 3DES key , use the cle ar key config-k ey comma nd. clear ke y conf ig-key string Syntax D escr i pti on Defaults Thi s command has no de[...]

2-51 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear l2proto col-tu nnel cos clear l2protoco l-tunnel c os T o cl ear the L a yer 2 p rotoc ol tunne ling CoS value fo r all i ng ress tu nne ling por ts, use the c lea r l2protocol-tunnel c os command. [...]

2-52 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear l2prot ocol- tun nel stat istics clear l2protoco l-tunnel st atistics T o cl ear Lay er 2 pr ot ocol tu nnel ing stat ist ics on a port o r on al l tu nne lin g p or ts, u se the c lea r l2protocol-tu[...]

2-53 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r lacp-cha nnel stat istics clear lacp-channel statistic s T o clea r Link Aggr egation Control Protocol (LA CP) statistical informa tion, use the clear lacp-channe l statistics command. clear la cp-[...]

2-54 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear lda clear lda T o remove the ac celerated serve r load balanc ing (A SLB) multi layer swit ching (MLS ) entrie s or MA C addresses fro m the switch, use the clear l da command. clear lda mls clear lda[...]

2-55 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) . Ente rin[...]

2-56 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear loc aluse r clear localuser T o delete a loca l user a ccount f rom the switch, use the clear localuser comman d. clear lo caluser name Syntax D escr i pti on Defaults Thi s command has no de fa ult s[...]

2-57 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear log clear log T o delet e module , system error log, or dump l og entri es, use the clea r log co mmand . clear lo g [ mod ] clear lo g dump Syntax Descript ion Defaults Thi s command has no de fa u[...]

2-58 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log com m a nd clear log comma nd T o clear the command log entry table, u s e t h e clear l og command co mmand. clear lo g command [ mod ] Syntax D escr i pti on Defaults Thi s command has no de fa [...]

2-59 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging buffer clear loggi ng buffer T o clear the s ystem logg ing bu f fer , use the clear lo gging buffer command. clear lo gging b uffer Syntax Descript ion This c omm and ha s no a rgume nts o [...]

2-60 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng callhom e clear logging cal lhome T o retore the CallHome def ault values or to clea r a d estination addr ess used in the CallHom e feature, use the cle ar loggi ng callhome command . clear[...]

2-61 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging callhome Relat e d Commands clear logging callhome from clear logging c a llhome repl y-to clear logging c a llhome sev erity clear logg ing ca llho me sm tp-s erver set logging callhome set[...]

2-62 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng callhom e from clear loggi ng callhome fro m T o clear the Fro m addres s used by the CallHom e feature, u se the clea r logging callhome from comm and. clear logging callhome from Syntax D [...]

2-63 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging callhome r eply-to clear loggi ng callhome re ply-to T o clea r the Reply- to add ress u sed b y the Cal lHome f eature, use the clear lo gging callho me reply -to comm and. clear logging c [...]

2-64 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng callhome severit y clear logging cal lhome severity T o clear the se verity l ev el used by the Call Home featu re and return it to the def ault va lue of 2 , use the clear logging c a llhom[...]

2-65 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging callhome sm tp-ser ver clear logging cal lhome smtp -server T o clear an SMTP ser ver f rom the list of Ca llHome SMTP serv ers, use the clear logg ing callhome smtp- server command. clear l[...]

2-66 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log ging leve l clear logging leve l T o reset the logging le vel for a facility or fo r all f acilities to their default sett in gs, use the cl ear logg ing lev el command. clear logging lev el { fac[...]

2-67 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear loggi ng level Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Exam ples This example shows how to reset a specif ic fa cility bac [...]

2-68 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng server clear logging server T o delete a syslog se rver from the sy stem log server tabl e, us e the clear logging ser ver command. clear l og gin g server ip_ad dr Syntax D escr i pti on De[...]

2-69 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r mls cef clear mls cef T o cl ear Cisco Ex pre ss Forwarding ( CEF) summ ar y s tati stics , use the clear mls cef com mand. clear mls cef Syntax Descript ion This c omm and ha s no a rgume nts o r [...]

2-70 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls cef rpf statistic s clear mls cef rpf statistics To clear the coun ters for packets and bytes that failed the h ardware RPF check, use the clea r mls cef rpf statist ics command. Syntax D escr i p[...]

2-71 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r ml s ent ry clear mls entry T o clea r MLS entr ies in the Cata lyst 6500 series switches , use the cl ear mls entry co mmand. clear mls entry [ ip | ipx ] all clear mls entry ip destination ip_add[...]

2-72 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls ent ry Up to 16 routers can be included e xplicitly as MLS-RPs. T o use a rou ter as an MLS, yo u must meet th ese condi tions: • The route r must be in cluded (either e xplicitly or autom atica[...]

2-73 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear mls entry cef clear mls entry ce f T o clear CEF adjacen cy statistics, u se the clear ml s entry cef command . clear mls entry cef adj acency clear mls entry cef ip [[ ip_ad dr /] mask_len ] adjace[...]

2-74 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls excl ude pro tocol clear mls exclude protocol T o rem ove a protocol por t that h as been exc lu ded from s hortc ut ting u s i ng the set ml s e xclude protocol comm and, use the clear mls exclud[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands clear mls multicast statistics 2-75 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 clear mls multicast statistics T o remov e ML S multicast sta tistics main tained b y the MSFC o n the switc h, use the clea r mls multicast statistics command . clear mls mu[...]

2-76 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls nde clear mls nde T o cl ear p ri mary an d se cond ar y ND E co lle ctor de stin ati on s and t o d isab le N DE, use the clear mls nde comm and. clear mls nde [ IP_address port ] Syntax D escr i[...]

2-77 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear mls nd e flow clear mls nde flow T o reset t he NDE f ilters in the Catalyst 6500 series swit ches, use t h e clea r mls nde flow com mand. clear mls nde flo w Syntax Descript ion This c omm and ha [...]

2-78 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics clear mls statistics T o clear har dware -instal led MLS statist ics entri es, use the cl ear mls stat istics co mmand. clear mls statistics clear mls statisti cs prot ocol { protocol[...]

2-79 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear mls st atistics This exampl e shows ho w to clear prot ocol 17, port 19344 fro m the stati stics collecti on: Console> (enable) clear mls statistics protocol 17 19344 Protocol 17 port 1934 cleare[...]

2-80 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics entry clear mls statistics en try T o clear statistics for MLS entries, use the clea r mls s tatist ics entr y command. clear mls statistics entry [ ip | ipx ] al l clear mls statisti[...]

2-81 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ml s statist ics entry When en ter ing th e IPX ad dress s yntax, us e the fol lowing form at: • IPX net address—1..FFFFFFFE • IPX node address—x.x.x where x is 0..FFFF • IPX address— ip[...]

2-82 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear m odu le pass w ord clear module pa ssword T o clear the password set by the password [ usernam e ] N AM command, us e the cl ear m odu le pa sswor d comm and. clear modul e password mod Syntax D escr[...]

2-83 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s cle ar ms fcau to stat e clear msfcautosta te T o clear the MSFC autostate co nf iguration , use the cl ear msfcautost ate comma nd. clear ms fcautosta te { all | mod/ ports } Syntax Descript ion Defaults[...]

2-84 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mult i cast route r clear multicast router T o clear manual ly config ured multicast rou ter ports from the multic ast router port list, use the clea r multicast r outer command. clear multi c ast rou[...]

2-85 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r ntp serv er clear ntp server T o r e move one or m ore s erver s f rom th e NT P s erver ta ble, u s e t he c lear n tp server command. clear ntp ser ver { ip_addr | all } Syntax Descript ion Defau[...]

2-86 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ntp ti mezone clear ntp timezone T o return the time zo ne to its default, UTC, use the clear ntp timezone command. clear ntp ti mezone Syntax D escr i pti on This c omm and ha s no a rgument s o r ke[...]

2-87 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear pbf clear pbf T o remo ve th e MA C address for the PFC2, use the clear pbf co mmand. clear pbf Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s command has no de fa[...]

2-88 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf arp-i nspe ction clear pbf arp-inspection T o clear the ARP-inspect io n A CE from the A CL for a client list or a gate way , u se the clear pbf arp-inspection comman d. clear pbf arp-inspection l[...]

2-89 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear p bf client clear pbf client T o cl ear a client or all clients from the lis t, use the clear pbf client command. clear pbf cli ent client_list [ ip_a ddr ] Syntax Descript ion Defaults Thi s comman[...]

2-90 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf gw clear pbf gw T o clear a gateway or all gateways, use the clear pbf gw command. clear pbf gw gw_ name [ ip_ad dr ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comm[...]

2-91 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear pbf-map clear pbf-map T o clear PBF map infor mation, use the clea r pbf-m ap comman d. clear pbf- map { vlan vlan } | all | { ip_addr_ 1 } { ma c_add r_1 } { vlan_1 } { ip_ad dr_2 } { mac_ addr_2 }[...]

2-92 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf -m ap Exam ples This example sho ws ho w to clear the A CL with the name PBF_MAP_A CL_11: Console> (enable) clear pbf-map vlan 11 ACL 'PBF_MAP_ACL_11' successfully deleted. Console>[...]

2-93 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear pbf vlan clear pbf vlan T o clear PBF-e n abled VLANs an d remo ve them from NVRA M, use the cl ear pbf vlan comman d. clear pbf vl an vlan Syntax Descript ion Defaults Thi s command has no de fa ul[...]

2-94 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port broa dcast clear port broadca st T o disable broadcas t/multicast suppression on one or more ports, use the clear port br oadcast comm and. clear port broadcast mod/po rt Syntax D escr i pti on D[...]

2-95 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear po rt cops clear port cops T o clear por t roles, use the clear port cops comman d. clear por t cops mod / port rol e s ro l e 1 [ ro l e 2 ]... clear por t cops mod / port all-r oles Syntax Descrip[...]

2-96 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port hos t clear port host T o cle ar the port co nfigurati on for opti mizing a hos t connec tion, use the clear port host comm and. clear por t host mod / port Syntax D escr i pti on Defaults Thi s [...]

2-97 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear port qos autoqos clear port qos autoqos T o cl ear the autom atic Qo S configurat ion on a per-port ba sis, use t he c lea r port qos autoq os comm and. clear por t qos mod/ports.. auto qos Syntax D[...]

2-98 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port qos cos clear port qos cos T o return the v alues set by the set port qos cos command to the def ault settings for all specif ied ports, use the clea r port qo s cos co mmand . clear por t qos mo[...]

2-99 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear p ort secu rity clear port security T o clear al l MA C addresses o r a s peci fic MA C addres s fr o m the lis t o f secu re MAC ad dr es ses o n a p o rt, use the clea r port securit y command. cl[...]

2-100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port se curity This e xample sho ws ho w to remov e a s ecure MA C addres s for all VLANs on a port : Console> (enable) clear port security 3/37 00-00-aa-00-00-aa all Secure MAC address 00-00-aa-0[...]

2-101 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear p ort vlan-m apping clear port vlan-mapping T o cl ear the VL AN mapp ing on a per-port basis, use th e clear port vlan-mapping command . clear port vlan-mapping { all | mod/port { source_vlan_id |[...]

2-102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pvl an mapping clear pvlan mapping T o d ele te a pr ivate VLAN ma ppin g, use t h e clear pvlan mapping command. clear pvlan mapping primar y_vlan { isol ated_vl an | commu nity_ vlan | twoway_commu[...]

2-103 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qos acl clear qos acl T o remo ve v arious A CL conf igurati o ns, use t he clear qos acl command . clea r qos acl acl_name [ editbuf fer_index ] clea r qos acl defaul t-act ion { ip | ipx | mac |[...]

2-104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos acl Exam ples This example sho ws ho w to de tach an A CL from all int erfaces: Console> (enable) clear qos acl map my_acl all Hardware programming in progress... ACL my_acl is detached from a[...]

2-105 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qos acl Relat e d Commands commit ro llback set qos acl map show qos acl e ditbuffer[...]

2-106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos aut oqos clear qos autoqos T o return the global automatic QoS co nfigu ration t o the f actory def ault settings, use the clear qo s autoqos co mmand . Syntax D escr i pti on This c omm and ha s[...]

2-107 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qos auto qos V arious error co nditio ns can occu r when the gl obal clea r command i s used. If yo u have properly ex ecuted the por t-based clear commands bef ore using th e globa l clear command[...]

2-108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos aut oqos All ingress and egress QoS scheduling parameters set to factory default. CoS to DSCP, DSCP to COS, IP Precedence to DSCP and policed dscp maps configured. Global Autoqos QoS cleared. Con[...]

2-109 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qo s config clear qos config T o return the v alues that were set by the set qos command t o the def a ult setti ngs and delete the CoS assi gned to MAC ad dress es, use the clea r qos con fig comm[...]

2-110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos cos -cos-ma p clear qos cos-co s-map T o return the CoS-to-CoS map to the def ault setting, use the clear qos cos- cos-map command . clear qos co s-cos-ma p Syntax D escr i pti on This c omm and [...]

2-111 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qos cos-dscp -map clear qos cos-dsc p-map To clear CoS-to-DSCP mappin g set by the set qos cos- dscp-map command and return to the defa ult setting, u se the c lea r qos co s-d scp-m ap command . c[...]

2-112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos dscp-c os- map clear qos dscp-c os-map To cl ear DS CP-to- CoS mappi ng se t b y the set qo s dscp-c os-m ap command and return to the de fault setting, u se the c lea r qos d scp- cos-m ap comma[...]

2-113 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qos dscp-m utation -map clear qos dscp-mutati on-map T o clea r DSCP m utation mappin g, use the clear qos dscp-mutation-map comm and. clear qos dscp-mutation-map { mutatio n_table_i d | all } Syn[...]

2-114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos dsc p-mu ta tion-tab le-map clear qos dscp-mutati on-table-ma p T o clear the DSC P mutation tabl e map, use the clear qos dscp-mutation-table- map command . clear qos dscp-mutation-table-map { a[...]

2-115 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qo s ipp rec -d sc p- ma p clear qos ipprec -dscp-map T o reset the m apping set b y the set qos ipprec -dscp-map command to t he defa ult setting, u se the clear qos ippre c-dscp-map comm and. cl[...]

2-116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ac-c os clear qos mac-c os T o clear the v alues set by t he set qos mac-cos command, use the clear qos mac-cos co mmand. clea r q o s m a c- co s dest_m ac [ vlan ] clear q o s ma c- co s all [...]

2-117 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qo s map clear qos map T o return the v alues to the default settin gs, use the clear qos map command. clear qos map port_typ e tx | rx Syntax Descript ion Defaults The de fault mapping s for all [...]

2-118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ap Relat e d Commands set qos map show qos maps[...]

2-119 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qo s pol ic ed -ds c p-ma p clear qos policed -dscp-map T o reset t he police r-t o-dscp map ping table to the defa ults, use th e cle ar qos policed-dscp-map . clear qos policed-dscp-map [ normal[...]

2-120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos pol icer clear qos policer T o clear poli cing rules f rom N VR AM , use t he clear qos policer command. clear qos po licer micr oflow micr oflow _name | all clear qo s pol ic er aggreg ate aggr [...]

2-121 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qos polic er This exam pl e sh ows how t o clear a specif ic aggre gate polic ing rule: Console> (enable) clear qos policer aggregate my_micro my_micro QoS microflow policer cleared. Console>[...]

2-122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos statis ti cs clear qos statistics T o clear QoS stati stic counte rs, use the clear qos sta tistics command. clear qos statisti cs [ ag gregate-police r [ polic er_name ]] Syntax D escr i pti on [...]

2-123 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear radius clear radius T o clear one or all of th e RADIUS s erv ers from the RADI US serv er tab le or r emov e a shared k ey entry , use the clear ra dius comm and. clear r ad iu s server a l l clea[...]

2-124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear rcp clear rcp T o clear rcp infor mation for f ile transfe rs, use th e clear r cp comman d. clea r rcp Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords. Defaults Thi s command [...]

2-125 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear r gmp statis tics clear rgmp statistics T o clear RGMP s tatistics informati o n for all VLANs, use the clear r gmp statist ics comm and. clear r gmp statistics Syntax Descript ion This c omm and h[...]

2-126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl clear security acl T o remove a sp ecific a ccess contr ol entry (ACE) or all ACEs f rom a VAC L and to de lete the VACLs from the edit buf fer , use the clear s ecurity acl command. cl[...]

2-127 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear securit y acl Usage Guid el i nes Changes you make by enterin g this com mand are saved to NVRA M and hardware only af ter you en ter the commit command. Use the show security acl command to displa[...]

2-128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl cap ture-po rts clear security acl captu re-ports T o r emove a po rt from the captur e port list, use the clear security acl ca pture -ports comman d. clear secur ity acl capture- port[...]

2-129 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear security acl counters clear security acl coun ters T o clear the s tatistics for all A CEs on all A CLs, use the c lear securit y acl counte rs command . clear s ecurity ac l counters Syntax Descri[...]

2-130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl cram clear security acl cra m T o di sab le compr ess ion a nd reo rderi ng o f ACL masks (CRA M) i n aut omati c m ode , use the clear securit y acl cram co mmand. clear s ecurity ac l[...]

2-131 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear securit y acl log f low clear security acl log flo w T o clea r all f lo ws in the secu rity A CL log tabl e, use t h e cl ear securi ty acl log flo w co mmand. clear s ecurity ac l log flow Syntax[...]

2-132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl m ap clear security acl map T o re move VAC L-to-VLA N mapping, use the clear securit y acl map comm and. clear s ecurity ac l map a cl_name vlan clear s ecurity ac l map { acl_n ame | [...]

2-133 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear security acl map This e xample shows ho w to remo ve all VACL -to-VLAN m appings from a specific VL AN: Console> (enable) clear security acl map 5 Map deletion in progress. Successfully cleared [...]

2-134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl statis ti cs clear security acl statistic s T o disable t h e collecti o n of sta tistics for all A CEs in a spec ifie d A CL, use the clea r secu rity ac l statistics command. clear s [...]

2-135 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp ac cess clear snmp access T o remove the acce ss rights of an SNMP gro up, use the clear sn mp acce ss comma nd. clear s nmp access [ -hex ] { gr oup name } { sec urit y-mo del { v1 | v2c }} c[...]

2-136 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p access -list clear snmp acces s-list T o clear the IP ad dress of a host that is ass ociated with an access lis t number , use the clear s nm p access-list command. clear sn mp access-lis t acc[...]

2-137 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r s nm p co mm unit y clear snmp communit y T o clear an SNMP comm unity table, use the clear sn mp community command . clear snmp community inde x [ -hex ] { index_name } Syntax Descript ion Defaul[...]

2-138 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p commu nity-ex t clear snmp communit y-ex t T o clea r an e xisting commun ity strin g, use the clear s nmp community -ext co mmand. clear snmp communit y-ext community _string Syntax D escr i p[...]

2-139 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r s nm p gr oup clear snmp grou p T o remo ve th e SNMP user fr om an SNMP grou p, use the clear sn mp group co mmand . clear s nmp group [ -hex ] gr oupn ame { user [ -he x ] userna me } { security[...]

2-140 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p ifalias clear snmp i falias T o clea r an SN MP interf ace alias, u se the clear snmp ifalias comm and. clear snmp ifalias { ifin dex | all } Syntax D escr i pti on Defaults Thi s command has n[...]

2-141 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp inf orm clear snmp inform T o clear the SNMP in form requ est conf iguration , use the clear snmp inf orm comma nd. clear snmp inf orm all clear sn mp inform r cvr_address clear snmp inf orm i[...]

2-142 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p notify clear snmp notify T o clear the SNMP notify name in the snmpNotifyT able, use the clear snmp notify command. clear s nmp notify [ -hex ] { notifyname } Syntax D escr i pti on Defaults Th[...]

2-143 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp targe taddr clear snmp targetadd r T o clear the SNMP tar get address entry in the T arge tAddressT able, use the clea r snmp targetaddr comm and. clear snmp tar g etaddr [ -he x ] { addrn ame[...]

2-144 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p target par ams clear snmp targ etparams T o clear the SNMP tar get parameters used in the snmpT argetP aramsT able, use the clear snmp target par am s com mand . clear snmp tar g etparams [ -he[...]

2-145 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp trap clear snmp t rap T o cl ear an en tr y from th e SNMP trap receiver tabl e, use t he clea r sn mp tra p command. clear sn mp trap { r cvr_ad dr } [ all ] Syntax Descript ion Defaults The [...]

2-146 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p user clear snmp us er T o remo ve an SN MP user , use the clear snmp user comman d. clear sn mp user [ -he x ] { username } [ re m ot e engine id ] Syntax D escr i pti on Defaults If a remot e [...]

2-147 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s cle a r sn m p vi ew clear snmp vi ew T o remo ve the MI B vie w entry fr om the vacm V ie wT reeFam ilyT able, use the cl ear snmp view comm and. clear sn mp view [ -hex ] { vie wname subtr e e } Syntax[...]

2-148 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree d ete cted-p rot ocols clear spantree detec ted-protoco ls T o det ec t legacy brid ges a nd the b oundar y por ts of the MS T r egion, use the clear spa ntr ee dete cted-pr otoc ols com ma[...]

2-149 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r s pa ntr e e m s t clear spantree mst T o clear the mapping of VLANs to an MST instan ce or to rev ert a port that is in pre-standard MST mode back to s tanda rd MST mod e, use t he clear span tr [...]

2-150 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree ms t Relat e d Commands set spantree mst show spantr ee mst[...]

2-151 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r sp an tre e por tco s t clear spantree portc ost T o clear the po rt cost o f a port on the switc h, use the clear sp ant ree portc ost co mman d. clear s pa n tree po rt co st m od/port [ ms t ] [...]

2-152 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort instance cost clear spantree porti nstanceco st T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinsta ncecost comm and. clear s pantree porti[...]

2-153 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear span tree portinstan cecost Relat e d Commands set spant ree po rtinstance cost show spantr ee statistics[...]

2-154 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort instance pri clear spantree porti nstancepri T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstanc epri comm and. clear sp antr ee portinst[...]

2-155 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear spantree po rtpri clear spantree portp ri T o clear the port pr iority of a port on the switch, use the clear spant r ee portpri comm and. clear sp antr ee portpri mod/port [ mst ] Syntax Descript [...]

2-156 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ortvlanc ost clear spantree portv lancost T o restore the def ault path cost to a VLAN on a port, use the clear span tree port vlanc ost command . clear sp a ntr ee po rt vlan co st mod/p[...]

2-157 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear sp an tre e por tvla nco st Usage Guid el i nes This command is valid in PVST+ mode only . If you do not spe cify a VL AN, a ll V LAN s ar e cle are d. Exam ples These e xampl es sho w ho w to rest[...]

2-158 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ortvlanp ri clear spantree portv lanpri T o reset the spanning tree port VLAN prior ity , use the clear spant ree portvlanpr i co mmand . clear s pantr ee portvl anpri mod/port [ vlans ] [...]

2-159 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear spantree r oot clear spantree root T o rest ore th e spann ing tree bridge priori ty, hel lo time , maxa ge, and forw ard de lay on t he swi tch to their default valu es, use the clea r spantr ee r[...]

2-160 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree ro ot This e x ample sho ws how to clear the spa nning tree roo t on an instance : Console> (enable) clear spantree root mistp-instance 1 Instance 1 bridge priority set to 32768. Instanc[...]

2-161 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear sp antree statistics clear spantree statistic s T o clear the s panning tree stat istics, use the clea r spant ree stati stics command . clear s pantr ee statistics m od/port clear s pantr ee stati[...]

2-162 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree sta tistics This e x ample sho ws how to clea r the spannin g tree statis tics for an inst ance: Console> (enable) clear spantree statistics mistp-instance 2 Statistics cleared for insta[...]

2-163 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear spantree up linkfast clear spantree uplink fast T o turn of f the Uplin kF ast feature and to return the switc h prior ity and port co sts to the d efau lt setti ngs, use the clea r spantr ee uplin[...]

2-164 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ss h mode clear ssh mode T o clear the Secu re Shell ( SSH) ve rsion and r eturn to compatibil ity mode, u se the clear ssh mode comm and. clear ss h mode Syntax D escr i pti on This c omm and ha s n[...]

2-165 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear syst em info-log command clear system info-log command T o r em ove a show comm an d from the s ystem i nform ation loggin g index, use the clear s yste m inf o-log command command . clear syst em [...]

2-166 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sy stem pr ofile clear system profile T o clear the system prof ile configura tion, use the clear s yst em profile command. clear syst em prof ile Syntax D escr i pti on This c omm and ha s no a rgum[...]

2-167 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ta cacs key clear tacacs key T o remov e the ke y setting used for T ACA CS+ authentica tion and encryption, use the clea r taca cs ke y comm and. clear ta cacs k ey Syntax Descript ion This c omm [...]

2-168 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear tac acs se rve r clear tacacs serv er T o remo ve a host fr om the lis t of T A CA CS+ serv ers, use the clear ta cacs s erver com mand . clear ta cacs ser ver ip_addr Syntax D escr i pti on Defaults[...]

2-169 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ti mezone clear timezone T o return the time zo ne to its default, UTC, use the clear ti mezone command . clear time zone Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaul[...]

2-170 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear top clear top T o sto p the T opN process, use the clear top command. clear to p { a ll | r eport_nu m } Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Swit[...]

2-171 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r tr un k clear trunk T o restore a trunk port to its defa ult trunk type and mode or to clear specific VLANs from the allo wed VLAN list for a trunk port , use the clear trunk comman d. clear trunk[...]

2-172 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an clear vlan T o delete an ex isting VLAN from a manage ment domain or to clear VLANs that are secured b y a Fire wall Ser vices Module, use the clea r vlan co mmand . clea r vlan vlans clea r vl[...]

2-173 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vlan Relat e d Commands set vlan show vlan[...]

2-174 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an co unters clear vlan counte rs T o retu rn the so ftware- cache d counte rs to 0 for all VLANs, use the clear vl an co unte rs co mman d. clear vl an counters { vlans | all } Syntax D escr i pt[...]

2-175 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vla n mapping clear vlan mapping T o dele te existing IEE E 802.1 Q VLAN-to- ISL VLAN mapping s or reserved-t o-nonre served VL AN mappin g, use the clear vlan mapping command. clear vlan mapping d[...]

2-176 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vm p s rcp clear vmps rcp T o delete the VMPS rcp user name from the VMPS serv er table, use the clear vmps r cp comm and. clear vmps r cp usernam e Syntax D escr i pti on Defaults Thi s command has [...]

2-177 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vmps server clear vmps server T o de lete a VMP S server f rom the VMPS server table, use the c lear vmps ser ver com mand. clear vmps serv er ip_addr Syntax Descript ion Defaults Thi s command has[...]

2-178 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vm p s stat is ti cs clear vmps statistics T o delete exi sting VMPS statistics, use the clear vmps statisti cs command. clear vmps s tatistics Syntax D escr i pti on This c omm and ha s no a rgument[...]

2-179 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vtp pruneel igible clear vtp pruneeligibl e T o specify which VLANs in the VTP domain are ine ligible f or pruning, use th e clear vt p prunee ligible comm and. clear vtp pruneeligible vlans... Syn[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands clear vtp statistics 2-180 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 clear vtp statistics T o delete VT P statistics, use the clear v tp stat istics comman d. clear vt p statistic s Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. De[...]

2-181 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s comm it commit T o commit al l A CEs or a specif ic A CE in NVRAM that has not been written to hardw are, use the commit comm an d. commit qos acl { acl_ name | all | adjacency } commit se curity a cl { [...]

2-182 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands commit Relat e d Commands ro llback[...]

2-183 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s commit lda commit lda T o commit ASLB c onfi guration th at has not bee n written to hardw are to NVRAM, u se the commit lda comm and. commit lda Syntax Descript ion This c omm and ha s no a rgume nts o [...]

2-184 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands configu re configure T o download a c onfiguration file from an rcp se rver or the networ k and execute each c omman d in that fi le, use the conf igure comman d. conf igure { host f ile }[ rcp ] conf igur[...]

2-185 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s configu re Exam ples Th is example shows how to do wnload the syst em5 .cfg c onfiguratio n file from t he 192. 122 .174. 42 ho st: Console> (enable) configure 192.122.174.42 system5.cfg Configure usi[...]

2-186 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands confreg confreg T o conf igure the conf iguration re gister utility , use the confr eg comm and. confreg [ num ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes R [...]

2-187 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s confr eg enter to boot: 0 = ROM Monitor 1 = the boot helper image 2-15 = boot system [0]: 0 Configuration Summary enabled are: diagnostic mode console baud: 9600 boot: the ROM Monitor do you wish to chan[...]

2-188 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands context context T o di splay the con text of a l oade d im age, use the context co mmand. cont ext Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords. Defaults Thi s command has no de f[...]

2-189 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s cont ext a0 : 00000000 00000400 | s4 : 00000000 0000000f a1 : 00000000 60276c58 | s5 : ffffffff ffffffff a2 : 00000000 00000074 | s6 : 00000000 60276c58 a3 : 00000000 00000000 | s7 : 00000000 0000000a t0[...]

2-190 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy copy T o u ploa d or downlo ad a Fla sh ima ge or a sw itch co nfigura tion t o or f rom a Fla sh device, r cp server, TFTP se rver, or an S CP s erver, use the copy command. copy fi le - i d { tftp |[...]

2-191 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy Defaults If a so urc e or d esti nat ion device is not given, the on e spe cified by t he cd command is used. If a destination f ilename is omitted, the source f ilename is used. Comma nd T ypes Swi[...]

2-192 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy If you ar e copying a softwa re image to mult iple intelligen t switching mo dules of the same type, use the flash keyword a s the co py destina tion. The swi tch au tomat ically determi nes w hich mo[...]

2-193 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy This exam ple shows how to use the copy command to upload t he switch conf iguratio n to a f ile named lab2.c fg o n t he TF TP se rver: Console> (enable) copy config tftp:lab2.cfg IP address or [...]

2-194 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy Console> (enable) copy flash config Flash device [bootflash]? Name of configuration file? test.cfg Configure using bootflash:test.cfg (y/n) [n]? y / Finished download. (10900 bytes) >> set pa[...]

2-195 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy 4369664 bytes available on device bootflash, proceed (y/n) [n]? y CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCC File has been copied successful[...]

2-196 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy ################################################################################ ################################################################################ ############# System Power On Diagnost[...]

2-197 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy Relat e d Commands clear ft p conf igure reset—switc h set boot config-r eg ister set boot co nfig-register aut o-config set boot system flas h set ftp show ftp write[...]

2-198 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands dele te delete T o delete a conf iguration f ile, use the delete comm and. delete [[ m/ ] device : ] file n a m e Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes S[...]

2-199 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s dev dev T o list the de vice IDs av ailable on a swit ch, use the de v comm and. dev Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fa ult set tings[...]

2-200 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands dir—ROM monit or dir—ROM monitor T o list the files of the name d device, use the dir comman d. dir de vice Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes R O[...]

2-201 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s dir—switch dir—switch T o display a list of f iles on a Flash memory dev ice, use the dir command. dir [[ m/ ] device : ][ f ilename ] [ all | deleted | lo ng ] Syntax Descript ion Defaults Thi s com[...]

2-202 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands dir—swit c h Exam ples This example sho ws how to display the file infor mation in short format: Console> (enable) dir -#- -length- -----date/time------ name 1 6061822 Mar 03 2000 15:42:49 cat6000-sup[...]

2-203 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s disa ble disable T o re turn t o n orma l mo de f rom p rivileged mo de , use the disable comman d. disable Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands discon nect 2-204 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 disconn ect T o close a sessio n by se ssion ID num ber, use the disconnect command . disconnect session_id Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T yp[...]

2-205 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s download down load T o copy a software image from a specified host to the Flash me mory of a designate d module , use the download command. download host f ile [ mod ] [ rcp ] download serial download vm[...]

2-206 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad Befo re you can e xec ute the download vmps co mm and su cc essfu lly , you m ust use the set vmps downloadserver command to c onf igur e the I P addr ess of the TFT P serv er and the na me of th[...]

2-207 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s download This sam ple sessio n shows how to connect to a re mo te termi nal fr om a Su n workstatio n and h ow to use the do wnl oad seri al comm and to copy a software im age to th e supervi sor engi ne[...]

2-208 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad This example shows ho w to upgrade the EPLD ima ge in force mod e on the modu le in slot 5: Console> (enable) download epld aq_cr128_art.bin 5 force CCCCCC Device found requiring upgrade in sl[...]

2-209 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s enable enable T o ac t iv ate pr ivileged mo de, u se the enable co mma nd. I n p rivileged mo de , ad ditio na l c omm ands ar e av ailable, a n d certai n comman ds display additional information. enab[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands format 2-210 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 format T o fo rmat boo tflas h or a Fl ash PC ca rd (a Flash d evice must be fo rmat ted be fore it ca n be u sed), u se the fo r m a t command. fo r m a t [ spare spare-num ] [ m/ ] device1 : [[ d[...]

2-211 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s for ma t Y ou ca n also spec ify device1 : monlib-f ilename as the de vice and filename to be used , as follows: format device1: [ device 1 : [ monlib-fil ename ]] If monlib-f ilename is omitt ed, the sy[...]

2-212 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands frame frame T o displ ay an individual stac k fram e, use the fr ame command. frame [ -d | -p ] [ num ] Syntax D escr i pti on Defaults The de fault is a boot ed image kernel con text, which is the younge [...]

2-213 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s fsc k fsck T o check a Fl ash fi le syste m for damage an d to repair any p roblems , use the fsc k co mman d. fsck [ m / ] devi ce : [ auto matic ] Syntax Descript ion Defaults Thi s command has no de f[...]

2-214 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands fsck Ente r th e dir command ag ain to see that the co rrupte d file is corrected : Console> (enable) dir disk0: 3 -rw- 556 Mar 06 2049 16:26:16 t1 4 -rw- 556 Mar 06 2049 16:26:16 t2 5 -rw- 556 Mar 06 2[...]

2-215 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s history—RO M monitor history—ROM monitor T o displ ay the co mman d history (t he last 16 co mman ds executed in the ROM monitor e n vironment ), use the history co mmand . This comman d is alia sed [...]

2-216 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands histor y—sw itc h history—switch T o s how th e co nt en ts of t he co mma nd h isto ry buffer , use the history comma nd. history [ gl obal ] Syntax D escr i pti on Defaults Thi s command has no de fa[...]

2-217 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s l2trace l2trace T o displa y the Layer 2 path taken by the pa ckets that sta rt at a specif ied sourc e address an d end at a specif ied d estination address, use the l2trace command . l2trace sr c_m ac_[...]

2-218 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands l2tra ce The Lay er 2 trace feature is not sup ported when multiple de vices ar e attached to one port throug h hubs (for exa mple, multiple CDP neighbors detected on a port). When more than one CDP n eigh[...]

2-219 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s l2trace This examp le shows how to display a su mmary of Laye r 2 packet pa th info rmation f or a speci fied source and destin ation MAC address: Console> (enable) l2trace 00-01-22-33-44-55 10-22-33-[...]

2-220 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands meminfo meminfo T o display informat ion about the main memory , p acket memory , and NVRAM, use the me min fo command. W ith the -l opti on, t he s uppo rt ed D RA M c on figurati ons ar e displ aye d. me[...]

2-221 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s ping ping T o s end ICM P e ch o-r eque st pa c kets to an othe r nod e on t he n etwor k, use the ping command. Y ou can also us e th e ping com mand w it hout argument s to c onfigure pi ng. ping -s ho[...]

2-222 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands ping The guide lines for th e ping -s command are as follows: • The maximum w aiting time before timing out is 2 seconds. • A new ping packet is gener ated after 1 second of sending the previous packet[...]

2-223 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s ping 64 bytes from elvis: icmp_seq=4. time=11 ms 64 bytes from elvis: icmp_seq=5. time=7 ms 64 bytes from elvis: icmp_seq=6. time=7 ms ^C ----elvis PING Statistics---- 7 packets transmitted, 7 packets re[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands pwd 2-224 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 pwd T o show the cu rrent set ting of the cd command , use the pwd comm and. pwd [[ m/ ] devic e : ] Syntax Descript ion Defaults If no m odule num be r o r device i s spec ified, pwd defaul ts to the[...]

2-225 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s quit quit T o exit a CLI session, use the quit comm and. quit Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Swit [...]

2-226 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reconfirm vmp s reconfirm vmps T o reconf irm the curr ent dynam ic port VLA N members hip assign ments with the VMPS s erver , use the reconf irm vmps comm and. reconf irm vmps Syntax D escr i pti on This[...]

2-227 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s reloa d reload T o for ce a modu le to acce pt a download throug h SCP , use the reload comman d. Thi s comma nd resets the module and prompt s you to initia te a download when th e reset is com plete. r[...]

2-228 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands repeat repeat T o repeat a com mand, use the repe a t command . rep e a t [ num | string ] Syntax D escr i pti on Defaults If no argu ment is specifie d, th e last command is repeated. Comma nd T ypes R OM[...]

2-229 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s repeat rommon 23 > repeat dir dir bootflash: File size Checksum File name 1973032 bytes (0x1e1b28) 0xdadf5e24 llue rommon 24 > repeat dir bootflash: File size Checksum File name 1973032 bytes (0x1e[...]

2-230 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reset— ROM moni tor reset—ROM monitor T o perf orm a soft res et of t he swit ch, use the res et ROM monit or com mand. res e t [- s ] Syntax D escr i pti on Defaults The default Flash device is slot0.[...]

2-231 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s reset—switch reset—switch T o restart the system or an ind ividual module, schedule a system reset, or cancel a sche duled rese t, use the res et command. res e t [ mo d | system | mindown ] res e t [...]

2-232 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch Y ou ca n use the rese t mi ndown comm and to r eset the swit ch as part of a minimal downt ime so ftw are upgrade in a system with a redundant supervi sor engine . For complet e inform ati[...]

2-233 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s reset—switch This e xample sho ws ho w to schedu le a reset wit h minimum do wntime for a specif ic future time and includ e a reaso n for the reset: Console> (enable) reset mindown at 23:00 3/15 So[...]

2-234 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands restor e co un te rs 2-235 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2F2 restore counters T o rest ore MA C and port coun ters, use the re store counte rs command . restore cou nters [ al l | mod/port s ] restore cou nte rs cha nnel { all | c hannel-id } [...]

2-236 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands restore coun ters This exam ple shows how to re store the co unte rs for c hanne l 7 69: Console> (enable) restore co unte r chan nel 769 This command will restore counter values reported by the CLI for[...]

2-237 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s rollback rollback T o clear chan ges made to the A CL edit b uf fer since its last sav e, use the rollback command . The A CL is rolled back to its state at the last commit command. rollba ck qos acl { a[...]

2-238 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands sessio n session T o open a se ssion with a modu le (for e xamp le, the MSM, N AM, or A TM), use the session command. This comm and all ows you to use the modul e-speci fic CLI. session mod Syntax D escr i[...]

2-239 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set set T o display all of the R OM monitor va riable names wit h their val ues, use the set comman d. set Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has [...]

2-240 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing comm ands set accountin g commands T o en able comm and e vent accou nting o n the switch , use the set accounting commands comman d. set accounting commands enable { con fig | enable | al[...]

2-241 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set acco unting c onnect set accountin g connect T o ena ble a cco unti ng of o ut bou nd co nne cti on events o n th e swit ch, use th e set accounting co nnect comm and. set accounting connect enable {[...]

2-242 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing exe c set accountin g exec T o enabl e account ing of norm al login sess ions on the sw itch, us e the se t accou nting ex ec command. set ac countin g exec enable { start-sto p | sto p-on[...]

2-243 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set accou nting ex ec Relat e d Commands set accounting commands set accounting connect set accounting suppress set accounting syste m set accounting update set radius key set r adi us s erver set ta cac[...]

2-244 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco unting su ppress set accountin g suppress T o enabl e or disab le suppre ssion of accou nting infor mati on for a user who has logged in without a user name , use the set accounting suppre ss comm[...]

2-245 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set accounti ng system set accountin g system T o enable acc ounting o f system e vents on th e switch, use th e set acco unting sy stem co mmand . set accounting syste m enable { sta rt-stop | st op-onl[...]

2-246 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco untin g sy stem Relat e d Commands set accounting commands set accounting connect set ac countin g exec set accounting suppress set accounting update set radius key set r adi us s erver set ta cac[...]

2-247 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set acc ounting update set accountin g update T o con figure the fr equen cy of account ing updat es, use the set accounting updat e command. set accounting update { new-inf o | { periodic [ int erv al ][...]

2-248 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a cll o g rate lim it set acllog ratelimit T o lim it the nu mbe r of pa ckets se nt to the r oute p roc essor CPU for bri dged ACEs, use the set ac llog rate limit command . set acllog ratelimit ra t [...]

2-249 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set acl mac-packet-classify set acl mac-packet-c lassify T o set MAC-based A CL looku ps for all packet type s on a VLAN, use the set ac l m a c-p ac ket-c la ssi fy comm and. set acl mac- packet -classi[...]

2-250 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set al ias set alias T o d efine ali ases (sho rtha nd version s) of co mm an ds, use the se t al ias command. set alias name comma nd [ pa rameter ] [ para meter ] Syntax D escr i pti on Defaults The def [...]

2-251 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ar p set arp T o add IP ad dress- to-MA C address mapping en tries to the ARP tabl e and to set th e ARP aging t ime for the table , use the set arp command . set arp [ dynamic | permanent | static ][...]

2-252 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ar p This e xample sho ws how to conf igure a permanent ARP entr y , which will remain in the ARP cache after a system reset: Console> (enable) set arp permanent 198.146.232.23 00-00-0c-30-0f-bc Per[...]

2-253 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set authentication enable set authentica tion enabl e T o enable authen tication using the T A CA CS+, RADIUS, or Ker beros serve r to determine if you ha ve pri vileged access p ermiss ion, use the se t[...]

2-254 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set authent ication enable Exam ples This examp le sho ws how to use th e T A CA CS+ serve r to determin e if a user ha s pri vile ged acc ess permis sion: Console> (enable) set authentication enable ta[...]

2-255 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set auth enticati on login set authentica tion login T o enable T A CA CS+, RADIUS, or K erberos as the authenti cation metho d for login, u se the set authen tic atio n l og in command. set au then tic [...]

2-256 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a uth e n t ic a t ion lo g in Usage Guid el i nes This comm and all ows you to choose th e authen tica tion meth od for the we b interfac e. If you configu re the auth entication m ethod for th e HTTP[...]

2-257 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set au tho riz at io n comm an d s set authorizatio n commands T o enable auth orization of comman d e vents on the switc h, use the set author ization comm ands comm and. set auth ori zation co mma nds [...]

2-258 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation com m a nds Exam ples This exampl e shows ho w to enable author ization for a ll commands with th e if-authentic ated option and none fallback option : Console> (enable) set authoriza[...]

2-259 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set authori zation ena ble set authorizatio n enable T o enable auth orization of pri vileged mode sessions on the switch, use the set author ization e nable comm and. set auth ori zation ena bl e ena bl[...]

2-260 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a uth o r i zat ion e n a b le This exampl e shows how to disab le enab le mod e author izatio n: Console> (enable) set authorization enable disable Successfully disabled enable authorization. Conso[...]

2-261 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set authorization exec set authorizatio n exec T o enable authoriza tion of e xec (nor mal mode) session ev ents on the swit ch, use the set author izati on exec com mand . set auth ori zation ex ec enab[...]

2-262 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation exec This exampl e shows ho w to disabl e ex ec mode authoriza tion: Console> (enable) set authorization exec disable Successfully disabled exec authorization. Console> (enable) Re[...]

2-263 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set autoshut set autoshut T o enab le or dis able autom atic module s hutdo wn, use the set module aut oshut comm and. set autosh ut { frequency num } set autosh ut { period minutes } Syntax Descript ion[...]

2-264 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a uto sh ut When the fre quency thre shold is reac hed and occ urs withi n the defined period , the Eth ernet modul e automatically shuts down . The follo wing is an exam ple of the syslog message that[...]

2-265 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ba nne r lc d set banner lc d T o con figure t he Ca talyst 650 0 se rie s Swi tc h Fabric Mod ul e L CD use r bann er, use the set banner lcd comm and. set banner lcd c [ tex t ] c Syntax Descript i[...]

2-266 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set bann er m ot d set banner motd T o prog ram a n MO TD banner to appear before session login , use the set banner motd comm an d. set banner motd c [ text ] c Syntax D escr i pti on Defaults Thi s comma[...]

2-267 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ba nner tel net set banner te lnet T o di splay or s uppr ess t he “ Cisc o System s C onsole” T elnet banne r me ssage , use t he s et banner telnet comm and. set banner telnet { enable | disabl[...]

2-268 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot aut o-conf ig set boot auto-con fig T o specif y one or mor e configur ation files to use to configure th e switch at boo tup, use th e set boot auto-c onfig comm and. Th e li st o f c on figu rat[...]

2-269 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boo t config -regist er set boot config -register T o con fi gu re t he b oot co nfi gu rat ion regi ster va lue , use th e s et bo ot co n fig-regis te r co mman d. set boot conf ig-register 0x valu[...]

2-270 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er The baud rate speci fied in the conf iguration re gister is use d by the R OM monitor o nly and is dif ferent from the baud rate spe cif ied by the set system baud command. When[...]

2-271 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boo t config -regist er Relat e d Commands copy set boot auto-c onfig set boot system flas h set conf ig acl n vram show boot show conf ig[...]

2-272 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig set boot config -register au to-config T o configure auto -config file dispensa tion, use the set boot conf ig-r egister auto -conf ig co mmand . set boot co nfig-[...]

2-273 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot config-register auto-config If you use the set boot auto-con f ig bootflash: switch.cf g with the overwri te option, y ou must u se the copy conf ig bootflash:switch.cfg command to sav e the swi[...]

2-274 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig This e xample sho ws how to enable synchronizatio n of the auto-conf ig file: Console> (enable) set boot config - register auto - config sync enable Configurati[...]

2-275 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot device set boot device T o set the Network Analysis Module (NAM) or Int rusion Detection System (I DS) boot environment, use the set boot device command . set boot device bootseq [ , boots eq ] [...]

2-276 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot dev ice This example shows ho w to specify mul tiple boo t en vironme nts on modul e 5: Console> (enable) set boot device hdd,hdd:5,pcmcia:slot0,network,hdd:6 5 Device BOOT variable = hdd,hdd:5[...]

2-277 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot sync no w set boot sync now T o immed iately initiate synchr onizati on of the sy stem imag e betwe en the acti ve and redund ant supervi sor engine, use the set bo ot sync now command. set boot[...]

2-278 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot sy nc time r set boot sync timer T o speci fy an amoun t of time fo r the image s ynchroniz ation timer , use the set boot sync timer co mmand . set boot sync t imer nsec Syntax D escr i pti on De[...]

2-279 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot syst em flash set boot system fla sh T o set the BOOT envi ronment v ariab le tha t specif ies a li st of ima ges th e switc h load s at sta rtup, u se th e set boot system flas h com mand. set [...]

2-280 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ca m set cam T o add entries int o the CAM table, set the agin g time for the CAM table, and c on fi gu re t ra f fi c f ilt er i n g from and to a specifi c host, us e t he set cam co mmand . set cam [...]

2-281 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ca m Usage Guid el i nes If the gi ven MA C address is a multicast address (the least signif icant bit of the most significa nt byte is set to 1) or broadcast a ddress (f f-f f-ff -f f-f f-ff ) and y[...]

2-282 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cam monitor set cam monitor T o moni tor the M A C addr esses that ar e learn ed and s tored in th e CAM ta ble, to spec ify th e polling interv al for the CAM table, or to specif y the upper and lo we[...]

2-283 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ca m monit or Command Mode s Pri vile ged. Usage Guid el i nes The no-learn violati o n action pr e vents MA C address lear ni ng o n an in ter fa ce, but it d oes not delete an y extra M A C addre s[...]

2-284 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation set cam notification T o enable n otif ication w hen a MA C addr ess change occurs to the CAM table an d to set the tim e between notif ications , use the set ca m noti f ica tion c[...]

2-285 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set cam notification Command Mode s Pri vile ged. Usage Guid el i nes Y ou ca n globall y disable noti fications using the set cam notif ication disable c omm an d, but the ot her notif ication c onfi gu[...]

2-286 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation Relat e d Commands clear ca m clear ca m notif icatio n set cam set snmp tr ap show cam show ca m notificati on[...]

2-287 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set cd p set cdp T o ena ble , disa ble, o r co nfigure Ci sco D isc overy Protoc ol (CD P) fea ture s g lob ally on al l po rts o r on specif ied ports, use the set cdp comm and. set cdp { enable | disa[...]

2-288 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cd p Usage Guid el i nes The set cdp v ersion command allo ws you to global ly set the hi ghes t version n umber of CDP p ackets t o send. If you ente r the glo bal set cdp enable or disable comman d, [...]

2-289 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set channelprotocol set channelp rotocol T o set th e protoc ol that man ages chan nelin g on a module , use the se t channe lprotocol comman d. set channelpr otocol { pagp | lacp } mod Syntax Descript i[...]

2-290 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel protoc ol Relat e d Commands clear la cp-channel stati stics set lacp-channel sy stem-pr iority set port lacp-channel set spant ree cha nnelcost set spant ree cha nnelvlancos t show channelpr [...]

2-291 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set c hannel vlancost set channel vla ncost T o s et th e chan nel V LAN co st, use th e set channel vlancost comm and. set channel vlan cos t c hannel_id cost Syntax Descript ion Defaults The def ault i[...]

2-292 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel vlanc ost After you enter this comm and, you must reenter the set s pantr ee portvlanco st comm and so th at th e desired VLAN or VL ANs are a ssociated with all th e channe l ports. This exam[...]

2-293 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set config acl nvram set config acl n vram T o copy the curren t commi tted A CL co nfiguration fr om DRA M back int o NVRA M, us e the set config acl n vram com ma nd . set config acl nv r a m Syntax De[...]

2-294 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set config checkpo int set config che ckpoint T o crea te a che ckpoint co nfigurati on file, use the set config checkpoint comma nd. set conf ig checkpoint [ name name ] [ device de vice ] Syntax D escr i[...]

2-295 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set con fig checkpo int This exam ple sh ows how to specify a n am e a nd device for a c onfigura tio n che ckpo in t file: Console> (enable) set config checkpoint name SARAH_07122002 device bootflash[...]

2-296 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set config mode set config mod e T o chang e the configu ration mode from a bi nary mode l to a text model or t o auto matica lly save the system co nfiguration in text mode in NVRAM , use the set conf ig [...]

2-297 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set confi g m ode Usage Guid el i nes Y ou can specify th e time int erv al b etween occu rrence s of sa ving the te x t conf igur ation in NVRAM e v en if the syste m is in binar y mod e. If you do not [...]

2-298 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set config mode Relat e d Commands show conf ig mode write[...]

2-299 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set config rollback set config rol lback T o roll the curren t conf igur ation f ile back to a checkpoi nt conf igu ratio n file , use the set c onf ig rollbac k comm and. set confi g rollback name Synta[...]

2-300 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cops set cops T o conf igure COPS functi onality , use the set cops comman d. set cops se rver ipaddress [ port ] [ primary ] [ diff-serv | rsvp ] set cops domain-name d omain_nam e set cops retry-int [...]

2-301 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set cops Exam ples Th is example sh ows how to configure a s erver as a pri mar y server: Console> (enable) set cops server 171.21.34.56 primary 171.21.34.56 added to COPS server table as primary serv[...]

2-302 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cryp to ke y r sa set crypto key rsa T o gen erate a nd c onfigure an RSA key pa ir, use the set c rypto key rsa command. set cry pto k ey rsa nbits [ fo rc e ] Syntax D escr i pti on Defaults The co m[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands se t default portstatu s 2-303 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 222 set default portstatus T o set t he def ault port sta tus, use the set default portstatus com mand. set default portstatus { enable | disable } Syntax Descript ion Defaults The d[...]

2-304 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set dhcp -snoop ing set dhcp-sno oping T o en able DHC P snoopi ng infor mat ion- opti on host trac king or the M AC address matc hing feature , use the set dhc p-snooping command. set dhcp-snooping info r[...]

2-305 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dhcp -snooping This comm and shows ho w to disable DH CP snooping MAC address matchin g: Console> (enable) set dhcp-snooping match-mac disable DHCP Snooping MAC address matching disabled. Console&[...]

2-306 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set dot1q- all-tagg ed set dot1q-all-tagged T o chang e all existing and new dot1q trunk s to the dot1q- only mode , use the set dot1q-all-tagged comm and. set dot1q- all-t agged { enable | disable } Synta[...]

2-307 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dot1x set dot1x T o configure 802. 1X on a syste m, use the se t do t1x command. set dot1x sy stem-auth-contr ol { enable | disable } set dot1x { quiet-period | tx-peri od | re-aut hperiod } seco nds[...]

2-308 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set d ot1x Defaults The def ault settings are as follo ws: • system-auth-control is enabled. • quiet-period is 60 se cond s. • tx-pe riod is 30 sec ond s. • re-a uthperiod is 3600 secon ds. • sup[...]

2-309 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dot1x T o acti vate th e shut do wn -time out tim er on a po rt, en ter th e set port dot1 x mod/port shutdown-timeout comm and. T o con figure t h e 802.1X user dist ribution fe atur e, f ol low the[...]

2-310 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set d ot1x Th is exam p le s h ows y ou h ow t o s pe ci f y t he retransmission of EAP-Reques t p ackets by the authenticator to the supplicant: Console> (enable) set dot1x supp-timeout 15 dot1x supp-t[...]

2-311 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dot1x Relat e d Commands clear dot 1x conf ig clear dot 1x vlan- gr oup set port dot1x set radius deadtime show dot1x show port dot1x[...]

2-312 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set e nab lep a s s set enablepa ss T o change the passw ord for the pri vile ged lev el of the CLI, use the set enablepass comm an d. set enablepass Syntax D escr i pti on This c omm and ha s no a rgument[...]

2-313 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set er rdisabl e-time out set errdisable-timeout T o conf igure a time out to auto matically r eenable ports that are in the err disable state, use the set errdisable -timeout comm and. set errdis able-t[...]

2-314 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set errdisa ble-time out • gl2pt-stp-threshold- exceed — Whe n L aye r 2 p rot ocol t unnel STP t h reshold i s excee ded • gl2pt-vtp-t hreshold-excee d —When La yer 2 proto col tunnel VTP threshol[...]

2-315 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set er rordetect ion set errordetection T o enabl e or disab le various erro r detect ions, use the set err ordetection co mmand . set err ordetection inband { enable | disable } set err ordetection memo[...]

2-316 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set errord et ection Defaults The follo wing are the default settings for set erro rdetectio n : • Inband erro r detection is enabled . • Memor y erro r dete ction i s enable d. • Portcounte rs error[...]

2-317 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set er rordetect ion The rapi d boot feat ure is av ailabl e on the following mo dules: • WS-X6248 -RJ45 • WS-X6248 -TEL CO • WS-X6348 -RJ45 • WS-X6348 -RJ21 • WS-X6148 -RJ45 • WS-X6148 -RJ21[...]

2-318 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set errord et ection Exam ples Th is exampl e sh ows how to ena ble m emor y er ror det ect ion: Console> (enable) set errordetection memory enable Memory error detection enabled. Console> (enable) T[...]

2-319 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set fan-tray-version set fan-tray-version T o set t he ve rsion for the fan tr ay in th e chassis, u se the set fan-tray-versi on command. set fa n-tra y-v ersion { 1 | 2 } Syntax Descript ion Defaults T[...]

2-320 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set feature agg-link- partne r set feature ag g-link-partner T o enable or dis able the aggress iv e lin k partn er featu re, use the set fe ature agg-link-partner command. set featur e agg-link-partner { [...]

2-321 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set feature mdg set feature mdg T o enable or disable the multiple defau lt gate way feature, use the set feature mdg comman d. set fe ature m dg { enable | di sable } Syntax Descript ion Defaults Thi s [...]

2-322 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set fi rewall set firewall T o conf igure the paramete rs for a Firew all Services Modul e (FWSM), use the set firewall command. set f ire wall multiple-vlan-inte rfaces { enable | di sable } Syntax D escr[...]

2-323 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ftp set ftp T o con figure Fi le Transfer Pr otoc ol ( FTP) para m eters, us e the set ftp comm and. set ftp u sername ne w_ft p_u sern ame set ftp password new_ftp_pa sswor d set ftp mode passive { [...]

2-324 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ft p This example shows how to disable FTP passive mode: Console> (enable) set ftp mode passive disable FTP Passive mode disabled. Console> (enable) Relat e d Commands clear ft p show ftp[...]

2-325 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set garp timer set garp timer T o adjust the v alues of the join, lea ve , and lea veall timers, use the set garp timer comma nd. set garp timer { timer_type } { timer_ value } Syntax Descript ion Defaul[...]

2-326 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gm rp set gmrp T o enable or d isable GARP Multica s t Regi stration Protocol ( GMRP) on the switch in all VLANs on all ports, use the set gm rp co mman d. set gmrp { en ab le | disa ble } Syntax D esc[...]

2-327 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gmrp fwdall set gmrp fwdall T o enab le or di sable the Forward All feature on a speci fied port or mo dule an d port lis t, use t he set gmrp fwdall comman d. set gm rp fw da ll { enable | disable }[...]

2-328 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp re gis tr ation set gmrp registration T o spec ify the GMRP regi strat ion type , use the set gmrp regis tration comm and. set gmrp registra tion { no rmal | fix e d | forbidden } mod/po rt... Syn[...]

2-329 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gmrp timer set gmrp timer T o adjust the v alues of the join, lea ve , and lea veall timers, use the set gmrp timer comman d. set gm rp ti me r { timer_type } { tim er_value } Syntax Descript ion Def[...]

2-330 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp timer This e xam pl e sho ws how to set t h e lea v eall timer v alue t o 20 000 mi llisec ond s for all t h e ports on all th e VLANs: Console> (enable) set gmrp timer leaveall 20000 GARP Leav[...]

2-331 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvrp set gvrp T o enab le or disa ble GARP V LAN Registrati on Protocol (GVRP) globally in the switch or on a pe r-port basis, use the set g vrp command. set gvrp { enable | disable } [ mod/port ] Sy[...]

2-332 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp appl icant set gvrp appli cant T o s pecify whether or not a VLAN is de clared out of blocking ports, use the set gv rp appl ican t comm and. set gvrp appl icant { normal | active } { mod /port ..[...]

2-333 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvrp dyn a mic-vlan-creat ion set gvrp dynamic-vlan-creatio n T o enab le or d isable dynamic VLAN cr eation, use the set gvrp dyna mic-vlan-c reation command. set gvrp dy namic- vlan- creation { ena[...]

2-334 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp r egi stratio n set gvrp reg istra tion T o s et the ad mini stra tive contro l of a n outbo und po rt a nd appl y t o all VL ANs on the tr unk , use t he set gvr p re gistra tion command. GVR P r[...]

2-335 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvr p regist ration This e xample shows ho w to set the administrative control to forbidden on module 5, por t 2 : Console> (enable) set gvrp registration forbidden 5/2 Registrar Ad mini strati ve[...]

2-336 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gvr p timer set gvrp timer To adju st the v alues of the j o in, le av e, and lea veal l timers, use th e set gvrp timer command. set gvrp timer { timer_type } { time r_v al ue } Syntax D escr i pti on[...]

2-337 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvrp timer This e xam pl e sho ws how to set t h e lea v eall timer v alue t o 20 000 mi llisec ond s for all t h e ports on all th e VLANs: Console> (enable) set gvrp timer leaveall 20000 GVRP/GA[...]

2-338 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp set igmp T o ena ble o r di sab le Inte rn et Group M anag eme nt Pr otoc ol ( IG MP) sn oop ing on the swi tch , us e the set ig mp command. set igmp { en ab le | disable } Syntax D escr i pti o[...]

2-339 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp fastblock set igmp fastblock T o enable or d isable the IGMP v ersion 3 fast-bloc k mechanism on the switch, use th e set i gmp fastb lock comm and. set ig mp fa stbl ock { enable | disable } Sy[...]

2-340 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp fastle ave set igmp fastleave T o ena ble o r disab le Inte rn et Group M a nagem e nt Pr otoc ol ( IGM P) fast leave proces sin g, use the set i gmp fa stleave comman d. set ig mp fa stle ave { [...]

2-341 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp flooding set igmp flooding T o acti vate or to pre vent flooding of mul ticast traf fic after the last host lea ves a multicast group, enter the set igmp f loodin g co mman d. set ig mp fl o odi[...]

2-342 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set igmp leave-que ry-type set igmp leave-que ry-type T o s et the t ype o f que ry to be se nt wh en a po rt r ece ives a leave messag e, u se the se t igmp lea ve-query-type comman d. set igmp lea ve-que[...]

2-343 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp mode set igmp mode T o s et the IG MP snoopi n g m ode, use th e set igmp mode command . set igmp mode { igmp-only | igmp-cgmp | aut o } Syntax Descript ion Defaults The default is IGMP mode is [...]

2-344 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp querier set igmp querier T o conf igure the IGMP q uerier for a specif ic VLAN, use the set igmp querier command. set igmp querier { enable | disable } vlan set igmp querier vl an { qi | oqi } se[...]

2-345 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp querier This exampl e shows ho w to set the quer ier inter val to 130 seconds for VL AN 4001: Console> (enable) set igmp querier 4001 qi 130 QI for VLAN 4001 set to 130 second(s) Console> [...]

2-346 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set igmp v3-pro ces sing set igmp v3-processing T o exp licitly e nabl e or disa ble I GMP version 3 snoo ping, u se the set igmp v3-processing comm and. set igmp v3 -processing { enable | disable } Syntax[...]

2-347 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set image-verification set image-verification T o ensure th e integ rity of a do wnloaded image, use the set image-v erif ication command . set image- verif icatio n [ boot | copy | re s et ] { enable | [...]

2-348 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set inline pow er set inlinepower T o set in line power parame ters, use the set inlinepower comman d. set inlinepowe r defaultallocati on value set inl in epower noti fy -th reshold value module mod Synta[...]

2-349 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set inlinepower This e xample shows ho w to set the threshold for the inline po wer u sage notific ation: Console> (enable) set inlinepower notify-threshold 40 module 4 Module 4 inlinepower notify-thr[...]

2-350 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set in terfac e set interface T o conf igure the in- band and Serial L ine Inter net Proto col (SLIP) interf aces on th e switch, use the set interface command. set inte rface { sc0 | sl0 | sc 1 } { up | d[...]

2-351 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set interface Usage Guid el i nes The set interfac e sc0 dchp com mand is valid on ly when the addr ess is lear ned from th e DHCP server and available in privile ged mode only. T wo conf igur able netw [...]

2-352 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set in terfac e This exa mple sho ws ho w to r elease a DHCP- learned I P addr ess back to the DHC P IP a ddress p ool: Console> (enable) set interface sc0 dhcp release Releasing IP address...Done Conso[...]

2-353 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip alias set ip alias T o add aliases o f IP addresses, use the s et ip alias comman d. set ip alias name i p_addr Syntax Descript ion Defaults The de fault configurat ion is one IP al ias (0.0 .0.0)[...]

2-354 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip dns set ip dns T o enab le or dis able DNS, use the set ip dns comman d. set ip dns { ena bl e | di sa ble } Syntax D escr i pti on Defaults The def ault is DNS is d isabled. Comma nd T ypes Swit ch[...]

2-355 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip dns domain set ip dns domain T o set t he defau lt DNS doma in name, us e the set ip dns domain comman d. set ip dns domain nam e Syntax Descript ion Defaults Thi s command has no de fa ult set ti[...]

2-356 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip dns ser ver set ip dns server T o set the IP addres s of a Doma in N ame Sys tem (D NS) s erver , use t he se t ip dns s erver comman d. set ip dns server ip_a ddr [ primary ] Syntax D escr i pti on[...]

2-357 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip fragmentation set ip fragmentation T o ena ble or d isable t he frag menta tion of IP packet s bridge d betwee n FDDI and Eth ernet networks, use the set ip fragment ation command. set ip fragm en[...]

2-358 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set i p ht tp por t set ip http port T o conf igure the TCP port numbe r for the Hype rT ext T ransfe r Protoco l (HTTP) se rve r , use the set ip http port comma nd. set ip http por t { default | po rt- n[...]

2-359 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip http server set ip http server T o e na bl e o r di sab l e th e HTT P se rver, use the se t ip http server comma nd. set ip http server { enable | disable } Syntax Descript ion Defaults The defau[...]

2-360 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set i p p e rm it set ip permit T o enable o r disable the IP p ermit li st and to spe cify IP a ddresses to b e added to the IP permit list , use the set ip permit com mand. set ip permit { enable | disab[...]

2-361 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip permit Exam ples This example sho ws how to add an IP address to the IP permit list: Console> (enable) set ip permit 192.168.255.255 192.168.255.255 added to IP permit list. Console> (enable[...]

2-362 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip redire ct set ip redirect T o enable o r disab le ICM P re direct me ssage s on the Catalyst 6500 se ries switches, u se the set ip redirect co mman d. se t i p re d i re c t { enable | disable } Sy[...]

2-363 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip route set ip route T o add IP addr esses or a liases to the IP rout ing table, use the set ip route comma nd. set ip route { destination }[ / netmask ] { gateway } [ metric ] [ prim ar y ] Syntax [...]

2-364 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip rout e Exam ples Th ese examples show ho w to add three d efault route s to t he IP routing tab le, che cking after each addit ion using the show ip route co mmand: Console> (enable) set ip route[...]

2-365 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip unr eachabl e set ip unreachabl e T o enable or disable ICMP unreac hable messages o n the Catalys t 6500 series switc h, use the set ip unrea chable command. set i p u nreach a b le { enable | di[...]

2-366 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros clients m and atory set kerberos clients ma ndatory T o make K erberos authentica tion mandatory fo r authenticatin g to services on the netw ork, use the set kerb ero s clients ma ndatory co[...]

2-367 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set kerbero s credentials f orward set kerberos credentials fo rward T o conf igure clients to fo rward users’ cred entials as the y connect to other hosts in the K erbero s realm, use the set k erbero[...]

2-368 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerb eros loca l-r ealm set kerberos local-realm T o conf igure a switch to authen ticate users def ined in the Kerb eros database, use the set kerberos local-r ealm co mma nd. set ker b eros lo ca l- [...]

2-369 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set k erb eros r eal m set kerberos realm T o map th e name of a Kerbe ros realm to a DNS domai n name or a host name, use the set ke rberos realm comm and. set k erb eros rea lm { dns_domai n | host } k[...]

2-370 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerb eros s erver set kerberos server T o s pecify whi ch Key Distribution Ce nte r (K DC) to us e on t he sw itch , use the se t kerberos serv er comm and. set ker b eros s erver ke rberos_r ealm { ho[...]

2-371 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set kerbero s srvtab entry set kerberos srvtab ent ry T o enter the SR VT AB f ile directly into the switch fr om the command li n e, use the set kerberos srvtab entry command. set ker beros s rvtab ent [...]

2-372 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros srvt ab entry Exam ples This example sho ws ho w to enter a SR VT AB f ile directly into the switch : Console> (enable) set kerberos srvtab entry host/niners.cisco.com@CISCO.COM 0 93242392[...]

2-373 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set kerber os srvtab rem ote set kerberos srvtab re mote T o p rovide t he sw it ch w it h a c opy of the SR VT AB file f rom th e KDC tha t c onta ins t h e secr et key , u se the set ke rbero s srv tab[...]

2-374 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set key conf ig-key set key config-key T o d efine a private 3DES key , use t he set key conf ig-ke y comman d. set key conf ig- key string Syntax D escr i pti on Defaults Thi s command has no de fa ult se[...]

2-375 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set l2pr otocol -tunne l cos set l2protoco l-tunnel c os T o apply a CoS va lue to all ingress tunneling ports, use the set l2protocol-tunnel cos comm and. set l2protoc ol-tunnel cos cos -val ue Syntax D[...]

2-376 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l2prot oco l-tun nel trunk set l2protoco l-tunnel trun k T o set La yer 2 proto col tunnel ing on tru nks, use the set l2pr ot ocol-tunnel trunk command. set l2protoc ol-tunnel trunk { enable | disable[...]

2-377 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set lac p-channel system-p riority set lacp-channe l system-priority T o set t he priority of the system , use th e set lacp-channel system-priority command. set lacp-channel sy stem-pr iority va lue Syn[...]

2-378 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set lcperror actio n set lcperrorac tion T o con figure h ow your sy stem ha ndle s Li nk Cont rol Proto co l (L CP) e rro rs when a m odu le repor t s an ASIC proble m to the NMP , use the set lcperroract[...]

2-379 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set lda set lda T o conf igure the ASLB informatio n on the Catalyst 6500 series switc h, use the set lda comman d. set lda enable | di sable set lda vip { server _ vi rtua l_ ip } { destin ation _ tcp_p[...]

2-380 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ld a Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) . Y ou can e[...]

2-381 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set lda This e x ample sho ws how to specify the ro uter VLAN: Console> (enable) set lda router 110 4/26 Successfully set router vlan and ld port. Use commit lda command to save settings to hardware. [...]

2-382 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l e n g th set length T o conf igure the numb er of line s in t he terminal display scr een, us e the se t length co mman d. set length nu mber [ default ] Syntax D escr i pti on Defaults The de fault [...]

2-383 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set localuser set localuser T o conf igure the switch to us e loc al u ser au th en tic atio n to auth en tic ate ac ces s o n the s witch, use th e set localuser command. set lo cal use r aut hen t ica [...]

2-384 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o c a lu ser Exam ples This examp le sho ws ho w to use the creat e a local user acc ount, includin g passw ord and pri vilege lev el: Console> (enable) set localuser user picard password captain [...]

2-385 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging buffer set logging bu ffer T o lim it the nu mber of sy stem l oggi ng me ssa ges buffered, use t he set logging buffer command. set lo gging buffer bu ff er _ si z e Syntax Descript ion Defa[...]

2-386 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhom e set logging ca llhome T o enable or disable the CallHom e featur e, use the set logging callhome comm and. set logging callhome { enable | disable } Syntax D escr i pti on Defaults C[...]

2-387 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging callhome show logging callhome from show logging callhome reply-to show logging callhome se verity show logging callhome smtp-server[...]

2-388 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set logg in g callhome d esti nat ion set logging ca llhome desti nation T o set the Call Home destinatio n address to recei ve the CallHo me messages, frag ment size, SNM P prof ile and SNMP index, use th[...]

2-389 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging callhome destination Console> (enable) set logging callhome destination adminjane@cisco.com Included adminjane@cisco.com in the table of callhome destination addresses. Messages will be se[...]

2-390 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhom e f rom set logging ca llhome from T o set t he Fro m e-mai l addres s used by the CallHo me feat ure, u se the set logging callhome fr om comm and. set logging callhome fr om E_ad dr [...]

2-391 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging cal lhome r eply-to set logging ca llhome reply-t o T o set the Reply-to e-mail ad dress, use the set logging c allhome r eply-to co mmand . set logging callhome r eply-to E_addr Syntax Descr[...]

2-392 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhom e s everity set logging ca llhome severity T o specify the CallHo me sev erity lev e l of system messages to captur e, use the set logging callhome severity command . set logging ca ll[...]

2-393 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging callhome severity Exam ples This example shows how to set the se verity to le vel 3: Console> (enable) set logging callhome severity 3 Callhome severity level set to 3 Console> (enable)[...]

2-394 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhome s mtp-s erv er set logging ca llhome smtp-server T o de signat e an I P addre ss as an SMTP serv er used b y the CallHo me featu re, u se the set logging callh ome s mtp- server co mm[...]

2-395 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging console set logging co nsole T o enable and disable the sendi ng of sy stem l ogging messages to the console , use t he set logging co nsole comm and. set loggi ng consol e { en a ble | disab[...]

2-396 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set logg in g history set logging hist ory T o s et the numbe r an d s ev erity level of sysl og me ssa ges sent t o the sysl og history ta ble, u se the se t log gin g hist ory command . set loggi ng hi s[...]

2-397 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set l ogging level set logging leve l T o set the faci lity and se verity lev e l used when logging system messages, use the set logging lev el comm and. set logging le vel facility se verity [ default ][...]

2-398 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g leve l Defaults The defau lt is faci lity is set to all , and leve l is se t to 0 . Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Y ou can also set th[...]

2-399 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set l ogging level Exam ples This example shows h ow to set the default f acility and se verity le vel for system message logging: Console> (enable) set logging level snmp 2 default System logging fac[...]

2-400 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set logg ing se rve r set logging server T o ena ble and disa ble system m essage lo gging to co nfigured syslo g se rvers a nd t o add a s yslog se rver to the sy stem loggin g serv er table, use the set [...]

2-401 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging server Usage Guid el i nes Y ou c an als o set the loggin g level by using the set logg ing level command. If you do no t enter the facilit y or serv er key words, the parameter is applied to[...]

2-402 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g sess io n set logging sessi on T o enable o r disab le the sending of sy stem log ging me ssages to the c urrent log in session , use the set logging session co mmand . set logging session[...]

2-403 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging telnet set logging teln et T o enab le or dis able loggi ng on T elnet session s, use the set loggi ng telnet command . set lo gging te ln et { en a b le | disa ble } Syntax Descript ion Defa[...]

2-404 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g tim esta mp set logging timestamp T o enab le or disabl e the time -stamp displ ay on system logging m essages, us e the set logg ing times tamp comm and. set loggi ng ti mestamp { ena ble[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set logout 2-405 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set logout T o set the number of minutes until the system disc o nnects an idle session automatica lly , use the se t logout command. set logout timeout Syntax Descript ion Defaults The defau l[...]

2-406 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set macro ciscosmar tports set macro ci scosmartport s T o set the global Cisco SmartPorts tem plate, use the set macro ciscos martports command. set ma cro c is cos mar tpo rt s Syntax D escr i pti on Thi[...]

2-407 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls agingti m e set mls agingtime T o specify the MLS agin g time of shortcuts to an MLS entry in the Catalyst 6500 series switches, use the set mls agingtime comm and. set mls aging time [ ip | ipx [...]

2-408 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ag in gt ime The agingtime v alue can be conf igured as mul tiples of 8 in the r ange o f 8 to 2 024 seconds. The v alues are pi cked up in num erical orde r to ac hieve ef ficien t agin g. Any v[...]

2-409 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls bridged-flow-statistics set mls bridged-f low-statistics T o enable or disable sta tistics for bridged flo ws for specifi ed VLANs, u se the set mls bridged- flow-s tat istics command. set mls br[...]

2-410 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set mls cef l oad -balan ce set mls cef load-bal ance T o in cl ude or exclu de L ayer 4 por ts in a l oa d-b ala nci ng hash, use th e se t m ls cef load-balanc e comm an d. set mls ce f l oad-b alance { [...]

2-411 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls cef max imum-rou tes set mls cef max imum-r outes To set the maximu m num ber of routes that can be programmed in t he FIB TCAM for a protocol, us e the set mls cef maximum- rou tes command. set [...]

2-412 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set mls cef maximum-routes • When the maximum ro utes is exceede d or the allocated TCAM space f or a protocol is fu ll, a system message (FIB_ALLOC _TCAM_FULL) displays. Note that because o f the intern[...]

2-413 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls cef per-prefix-statistics set mls cef per-prefix-statistics T o set MLS CEF per -prefix st atistics mo de, use the set m ls cef per-pr efix statistics command . set mls cef pe r -pref ix statisti[...]

2-414 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set mls excl ude prot oco l set mls exclude protoco l T o exclude an M LS protoco l port on a switc h configured with the Supervis or Engin e 1 with Layer 3 Switching Engine WS-F6K-PFC, use the set mls exc[...]

2-415 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls flow set mls flow T o specif y the minim um flo w mask used for MLS, use the set mls flow comman d. Thi s comma nd is needed to collect statistics f or the superv isor engin e. set mls flow { des[...]

2-416 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m ls flow Exam ples Th ese examples show how to specify that only expired flows to subnet 171. 69.194.0 a re exported: Console> (enable) set mls flow destination Configured flow mask is set to desti[...]

2-417 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set m ls nd e set mls nde T o conf igure the NetFlo w Data Export (NDE) feature in the Catalyst 6500 series switches to allo w comman d-export ing stati stics to be sent to the preco nfigured colle ctor,[...]

2-418 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde Defaults The def aults are N etflo w Data Ex port v e rsion 7, a nd all expired flo ws are e x ported u ntil the f ilter is specif ied explicitly . Destination ifInde x support and source ifIn[...]

2-419 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set m ls nd e In softw are releas e 8.3(1) and la ter releases, the dual destination f eature allo ws NetFlo w expor t data to be sent t o two dest inatio ns simult aneousl y . W ith thi s enhanc emen t,[...]

2-420 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde This e xample shows h ow to specify that only flo ws from a specific port are exp orted: Console> (enable) set mls nde flow include dst_port 23 NDE source port filter set to 23. Console>[...]

2-421 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set m ls nd e Relat e d Commands clear mls nde flo w show mls show ml s nde[...]

2-422 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ne tf lo w -ent ry- c r e at e set mls netflow-entry-create T o specify th e VLANs on which yo u can enable or dis able the creati o n of NetFlo w entries, u se the set mls ne tflow-e ntr y- crea[...]

2-423 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls netflow-per- interface set mls netflow-per-interface T o enable or disable the creation of NetF low entries on a per- VLAN basis, use the se t mls netflow-per -interface comm and. set mls netflow[...]

2-424 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ml s rate set mls rate T o set the rate at which inde x-directed packe ts are sent to the MSFC, use the set mls rate comm and. set mls rate kpps Syntax D escr i pti on Defaults The kpp s argume nt is 0[...]

2-425 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls statistics protocol set mls statistics proto col T o add protocols to the protocols stat istics list, use the set mls stat isti cs protocol command. set mls sta tistics protocol pr otoc ol sr c _[...]

2-426 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ml s verif y set mls verify T o enab le or disab le ch ecksu m or packet ch eckin g based on packe t lengt h, use the set mls verify comm and. set mls veri fy checksum { enab le | disa ble } set mls ve[...]

2-427 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls verify Exam ples This examp le sho ws ho w to enable IP check sum: Console> (enable) set mls verify checksum enable Ip checksum verification enabled Console> (enable) This exam ple sh ows h[...]

2-428 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e set module T o enab le or d isable a module, u se the set module comman d. set m o du le en a ble | disable mod Syntax D escr i pti on Defaults The def ault is a ll modules ar e enabled . Comma[...]

2-429 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set module This example shows ho w to disable mod ule 2 whe n connecte d through a T elne t session: Console> (enable) set module disable 2 This command may disconnect your telnet session. Do you want[...]

2-430 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e au toshu t set module autoshut T o enab le or dis able autom atic module s hutdo wn, use the set module aut oshut comm and. set module autoshut { enable | disable } mo d Syntax D escr i pti on [...]

2-431 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set module autoshut Relat e d Commands clear aut oshut set autosh ut show autoshut[...]

2-432 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e na me set module name T o set th e name for a module, use the set module name command. set module name mod [ mod_n ame ] Syntax D escr i pti on Defaults The default is no module names are confi[...]

2-433 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mod ule p ower set module power T o turn the po wer on or of f to a module, use the set module power command. set module power { up | down } mod [ pm_o ption ] Syntax Descript ion Defaults The de fau[...]

2-434 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e po wer Relat e d Commands set poll show environment[...]

2-435 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set module shutdown set module shutdown T o shut down the N AM and Intrusion Dete ction Syste m Module (I DSM), use the set module shutdown comm and. set module shutdown { all | mod } Syntax Descript ion[...]

2-436 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set msfcaut ostate set msfcautostate T o enable o r disable the line protocol s tate dete rmination o f the Mu ltilayer Swit ch Featu re Cards (MSFC s) du e to p o rt st ate c ha nges , us e th e se t msfc[...]

2-437 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set msfcautostate Cautio n Y ou should not d isable the MSFC auto state feat ure becau se the Laye r 3 interf ace status might not accura te ly re fle c t th e La yer 2 i nte rface sta tus. If yo u d isa[...]

2-438 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set msmautos tate set msmautost ate T o en able or disa ble th e line protocol st ate de termina tion of t he MSMs due to port state ch ange s, use the set msmautostate command . set msmautostate { enable [...]

2-439 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set multicast ratelimit set multicast ratelimit T o conf igure multicast ra te limiting, use the set multicast rat elimit comm and. set multicast ratelimit { enable | disable } set multicast rate limit r[...]

2-440 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m u ltic ast rou te r set multicast router T o conf igure a port man ually as a multi cast router port, us e the set multicast router command. set multi cast rout er mod/port Syntax D escr i pti on Def[...]

2-441 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set n tp broa dcastclient set ntp broadcastc lient T o ena ble o r disab le NT P in br oadc ast- cli ent mode , use t h e set ntp broadcastclient comman d. set ntp broadcastclie nt { ena b le | di sa ble[...]

2-442 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ntp broad castd el ay set ntp broadcastd elay T o conf igure a tim e-adjust ment f actor so the Catalyst 6500 s eries switch can recei ve br oadcast packets, use the set ntp broadcastdelay comm and. se[...]

2-443 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set n tp client set ntp client T o enable or disabl e a Catalyst 6500 ser ies switch as an NTP client, use the set ntp client command. set ntp client { enab le | disa ble } Syntax Descript ion Defaults T[...]

2-444 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set nt p server set ntp server T o s peci fy t he N T P server addr ess and co nfigure an N TP se rver au th en tica tio n key , us e the se t ntp server command. set ntp serv er ip_addr [ key public_keynu[...]

2-445 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ntp sum mertime set ntp summertime T o set th e clock ahead on e hour durin g dayli ght saving time, u se the set ntp summertime command. set ntp summertime { ena ble | disable } [ zone ] set ntp sum[...]

2-446 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set nt p summertim e This exam ple sh ows how to prevent the syst em f rom set ti ng th e c lock a head on e ho ur dur ing dayl ight saving time: Console> (enable) set ntp summertime disable Summertime [...]

2-447 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ntp time zone set ntp timezone T o conf igure the time o ff set from G re en wi c h Me an Ti me , use the set ntp timezone command. set timezone [ zone_n ame ] [ hou rs [ minutes ]] Syntax Descript i[...]

2-448 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pa sswor d set password T o chan ge the lo gin p assw ord on the CLI, us e the set password comman d. set password Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords. Defaults The d[...]

2-449 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf set pbf T o enable po licy -base d forw arding (PBF) and to set a MA C address fo r the PFC2, use th e set pbf comm and. set pbf [ mac mac_add r ess ] Syntax Descript ion Defaults Y ou ca n use t[...]

2-450 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pb f Relat e d Commands clear pbf show pbf[...]

2-451 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf ar p-inspection set pbf arp-inspection T o add an ARP-inspec tio n A CE to the A C L for a c lien t list o r a gat e way , use th e se t pbf arp-inspection comm and. set pbf arp-inspection list_n[...]

2-452 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf c li ent set pbf client T o add ne w hosts to a PBF client list, use the set pbf client command. set pbf client client_li st ip _ad dr m ac_addr vlan Syntax D escr i pti on Defaults Thi s command [...]

2-453 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p bf client Exam ples This example sho ws how to add a ne w host to a client list: Console> (enable) set pbf client cl1 21.1.1.1 00-00-00-00-40-01 101 Commit operation successful. Console> (ena[...]

2-454 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf g w set pbf gw T o add a PB F gateway to ha nd le co nnect ion s b etw een VLA Ns , use th e set pbf gw co mman d. set pbf gw gw_nam e ip_ addr i p_ mask m ac_ad dr v lan Syntax D escr i pti on De[...]

2-455 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf gw Exam ples Th is exampl e sh ows how to ad d a PB F ga teway to hand le co nnecti on s b etwe en V LAN s: Console> (enable) set pbf gw gw1 21.0.0.128 255.0.0.0 00-a0-c9-81-e1-13 102 Commit o[...]

2-456 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf- m ap set pbf-map T o create security A CLs and to set adjacenc y information or to map a list of hosts to a gatew ay , use the set pbf -ma p command. set pbf -ma p { ip_addr_1 } { m ac_ addr_1 } [...]

2-457 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf-map commit se curity acl ip PBF_MAP _A CL_12 set secu rity acl map PBF_ MAP_A CL_11 11 set secu rity acl map PBF_ MAP_A CL_12 12 Each entr y in the A CL that is adde d by the set pbf-map comm and[...]

2-458 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf- m ap Relat e d Commands clear pbf cli ent clear pbf gw clear pbf- map set pbf client set pbf gw show pbf client show pbf gw show pbf-map[...]

2-459 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf vlan set pbf vlan T o cre ate poli cy-based for ward (PBF ) Layer 2 CAM ent ries on a VLAN, use the set pb f vlan comm and. set pbf vl an vlan Syntax Descript ion Defaults Thi s command has no de[...]

2-460 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p oll set poll T o enab le or d isable system pollin g, use the set poll command. set poll { enable | disable } Syntax D escr i pti on Defaults System pollin g is enab led. Comma nd T ypes Swit ch co m[...]

2-461 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt arp- inspect ion set port arp-inspection T o set Address Re cogniti on Proto col (ARP) inspection thresh olds and the ARP t rust fea ture on a per-port basis, use the set port arp- inspection c[...]

2-462 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port arp-i nspec tion Exam ples Th is example shows how to set the drop-th reshold to 500 and the shut down-threshold to 1000 for port 2/1: Console> (enable) set port arp-inspection 2/1 drop-thresho[...]

2-463 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port auto-mdix set port auto-mdix T o enab le or disable the automatic Media-Depend ent In terfa ce Cros sov er (MDIX) f unctio n, use the set port auto -mdix fe atur e. set po rt a u to-m dix mod /p[...]

2-464 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port auto -mdi x Exam ples Th is example shows ho w to enable the auto matic MD IX funti on on port 4/1 : Console> (enable) set port 4/1 auto-mdix Console> (enable) Relat e d Commands show port a[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set port auxiliaryvla n 2-465 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 set port auxiliaryv lan T o conf ig ure the auxiliary VLA N ports, use the set port auxiliaryvl an command. set port a uxiliaryv lan mod [ /port ] { vl an | untagged | dot1p | none [...]

2-466 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port auxi liaryv lan The pr esence of an IP phone is d etermin ed thr ough CDP packe t exchange be twee n the swi tch and the phone. Th is de tec ti on me thod is u sed for bo th i nli ne-p owered I P [...]

2-467 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt br oa dca s t set port broadca st T o set broadcast, multica st, or unicast suppressi on for one or more ports, use the set port broadcast command. The threshold limits the b ackplane traf fic [...]

2-468 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port b roa dcast This e xample sho ws how to limit broadcast traf fic to 90 percent an d to errdisable when suppression occurs: Console> (enable) set port broadcast 4/6 90% violation errdisable Port[...]

2-469 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port c hannel set port channel T o con figure E the rCh an nel on E th erne t m odule p orts, u se the set port channel comm and. set port channel mod/port [ adm in_gr oup ] set port channel mod/port[...]

2-470 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port chan nel Defaults The def ault is EtherChann el is set to auto and silent on all module ports. The de faults for frame distribution ar e ip and both . Comma nd T ypes Swit ch co mman d. Command Mo[...]

2-471 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port c hannel Exam ples Th is ex ampl e sh ows how to s et th e ch an ne l mo de to desirable : Console> (enable) set port channel 2/2-8 mode desirable Ports 2/2-8 channel mode set to desirable. C[...]

2-472 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port cops set port cops T o create port role s, use the set port cops command. set port cops mod / port rol e s ro l e 1 [ ro l e 2 ]. .. Syntax D escr i pti on Defaults The de fault is all por ts hav [...]

2-473 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt de bo unc e set port debounce T o enabl e or disab le the de bounce t imer or co nfigure the time r setting on a per-port basis , use the set port debounce command. set port debounce mod/port {[...]

2-474 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port debo unce Usage Guid el i nes The debounce timer is the time th e firmw are waits before n otifying the supervisor engine o f a link chan ge a t t he physi cal la ye r . Setting the debounce timer[...]

2-475 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port dhcp -snoopi ng set port dhcp-sno oping T o enable DHCP t rust and IP Sour ce Guard on a per -port basi s, use the set port dhc p-snooping comm and. set port dhcp-snooping mo d/ports { trust | s[...]

2-476 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dhcp -snoop ing Relat e d Commands show port dhcp-snooping[...]

2-477 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort disa ble set port disable T o disa ble a port or a ra nge of port s, use the set port disable comm and. set port disable mod/ port Syntax Descript ion Defaults The default sy stem co nfigura ti[...]

2-478 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1q-all-tagg ed set port dot1q-all-tagged T o enable the 802.1 Q tagging feature o n specif ic ports, use the set port dot1q-all-tagge d comma nd. set po rt d o t1q- all-ta gge d { mod/ port } [...]

2-479 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port dot1q-all-tagged Relat e d Commands set dot1q- all-t agged show dot1q-all-tagged show port dot1q-all-tagged[...]

2-480 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1q-ethert yp e set port dot1q-eth ertype T o set the Et h erT ype fi eld in the IEEE 802.1Q tag to a cu stom v alue, use the set port dot1q- ethertype comm and. set port dot1q-ethertype mod/po[...]

2-481 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1q- ethert ype Note Y ou can use a custom 802.1Q EtherT ype field on t runk po rts, 802.1Q access ports, and 8 02.1Q/802.1p multi-VLAN access ports . Ad ditionally , you should con f i gure [...]

2-482 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1qtunnel set port dot1qtunne l T o co nfigure th e dot1q t un nel mo de f or th e po rt, use th e set po rt dot1qtunnel command. set port dot1qtunnel mod/ port { access | disable } Syntax D es[...]

2-483 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1 qtu nn el This examp le shows the output if you try t o turn o n trunki ng on a p ort that ha s dot1q tu nneling m ode set: Console> (enable) set trunk 4/1 on Failed to set port 4/1 to [...]

2-484 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x set port dot1x T o con figure 8 02. 1X o n a por t, use t he set port dot1x command . set port dot1x mod/port multiple-host { enable | disable } set port dot1x mod/port port -c ontrol po rt[...]

2-485 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1 x Defaults The def ault settings are as follo ws: • The mu lti ple h ost f eat ur e is disa ble d. • The port_contr ol_value is set to f orce-a ut hor ized . • The reau thentic ation[...]

2-486 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x If you disab le the mu ltiple host featur e, once a 802 .1X por t is authori zed through a suc cessful authe nticat ion of a supplic ant, on ly tha t parti cular h ost (MAC address) is allo[...]

2-487 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1 x • The authenti cation fail ure VLAN is supported only in the single -authenticat io n mode (the default port m ode). • The aut he ntica tio n failure VL AN i s no t sup por ted on a [...]

2-488 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x This exam ple sh ows how to act iv ate aut om atic r eena bling of a port afte r t he sh ut down-time out per iod has elapsed: Console> (enable) set port dot1x 2/1 shutdown-timeout enabl[...]

2-489 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port duplex set port duplex T o configu re the dup lex type of a n Ethe rn et p ort o r a rang e o f p ort s, use the set port duplex comm and . set port duplex mo d/port { full | half } Syntax Descr[...]

2-490 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort enab le set port enable T o enable a po rt or a ra nge of por ts, us e the set port enable command . set port enable mod/po rt Syntax D escr i pti on Defaults The def ault is all port s are en ab[...]

2-491 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set por t errdi sable-t imeout set port errdisable-timeout T o prevent an er rdisabl ed port fr om bei ng enab led, use t he set port e rrdisable -timeout command. set port errdisable-ti meout mod/ port [...]

2-492 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port error detect io n set port errordetection T o enab le or dis able link er ror monito ring on an Ethe rChannel port, use the set port err ordetec tion comm and. set port err ordetection mod/port { [...]

2-493 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port flowcontrol set port flowcontrol T o co nf igure a port to se nd or rec eiv e pause frames, us e the s et por t flowcon tr ol comm an d. Pause frame s are specia l pack ets t h at si gnal a sour[...]

2-494 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port flowc ontrol Ta b l e 2 - 1 7 descri bes guid eli nes for differe nt c onfigura tions o f the send a nd re ce i ve ke ywor ds. Exam ples Th is example shows how to configure port 1 of mo dule 5 to[...]

2-495 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort gm rp set port gmrp T o enable or disable GMRP on the specified ports in all VLANs, use the set port gmrp command . set port g mrp mod/po rt { ena ble | disable } Syntax Descript ion Defaults T[...]

2-496 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port gvrp set port gvrp T o enable o r disable GVRP on th e specified ports in all VLA Ns, use the set por t gvrp comman d. set po rt g v rp mod/po rt { enable | di sable } Syntax D escr i pti on Defau[...]

2-497 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port g vrp This examp le shows what happens if you try t o enabl e GVRP on a spe cific port when G VRP has not first been e na ble d u si ng t he set gvrp comman d: Console> (enable) set port gvrp[...]

2-498 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt host set port host T o optimize the port co nf iguration for a host connec tion, use the set port host co mmand. set port host mod/ port Syntax D escr i pti on Defaults Thi s command has no de fa[...]

2-499 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort inlinepower set port inlinepower T o s et the i nli ne power mo de of a po rt or group of p orts, u se t he set port inline power command . set po rt i nl in epow er mod /port { auto | static} [...]

2-500 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t inli n epower This exam ple sh ows the o utput i f th e inl ine power fea tu re is not s uppo rte d: Console> (enable) set port inlinepower 2/3-9 auto Feature not supported on module 2. Consol[...]

2-501 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port jumbo set port jumbo T o enab le or dis able the jumb o frame featur e on a per- port basis , use th e set por t jumbo co mman d. set port ju mbo mo d/port { enable | disable } Syntax Descript i[...]

2-502 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port l2 prot ocol-tun nel set port l2protoco l-tunnel T o set La yer 2 proto col tunnel ing para meters, use the set port l2protocol-tunnel command. set port l2protocol-tunnel mod/port { cdp | stp | vt[...]

2-503 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port l2protoc ol-tunnel • 5 Laye r 2 prot o col tunn eli ng port x 200 VL AN s • 10 Layer 2 pro tocol tun neling port x 100 VLANs • 20 Layer 2 pro tocol tun neling po rt x 50 VLAN s • 100 Lay[...]

2-504 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port l2 prot ocol-tun nel Relat e d Commands clear l2protocol -tunnel cos clear l2protocol-tunnel statisti cs set l2protoc ol-tunnel cos show l2pr otocol-tunnel statistics show port l2protocol -tunnel[...]

2-505 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort lacp -channel set port lacp-channe l T o set the pr iority v alue for physi cal por ts, to assign an admi nist rati ve ke y to a particular set of por ts, or to change the chan nel mode for a s[...]

2-506 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port lacp -cha nnel • Y ou ca n assi gn a m axi mu m of 8 p orts to a n admi nistr ative key . • If you assign a n admin istrative ke y to a chan nel that was previously assi gned a part icular mod[...]

2-507 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port ma cro set port macro T o execute a co nfiguration ma cro on a per-port basis, us e the set port macr o comma nd. set po rt m a cro mod/por ts. .. ciscoipphone vlan vlan [ auxvla n auxv lan ] se[...]

2-508 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port m acro T o configure t he QoS se ttings an d the tr usted bou ndary feature on the Cisc o IP Phone , you m ust enab le Cisco Disc overy Protocol (CD P) version 2 or la ter on t he p ort. Y ou nee [...]

2-509 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port ma cro Do you want to continue (y/n) [n]? This exam ple shows how to execute th e Cisc o Soft ph one c onfigurat ion ma cro: Console> (enable) set port macro 3/1 ciscosoftphone vlan 32 Port 3[...]

2-510 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port member ship set port membership T o set t he VLAN me mbership assig nment to a port, us e the set port membership command. set port membership mod/port { dy namic | static } Syntax D escr i pti on[...]

2-511 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port membership Relat e d Commands set pvlan set pvlan mapping set vlan set vlan mapping[...]

2-512 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port name set port name T o co nf igure a name for a port, use th e set port name comman d. set port name mod/po rt [ port _name ] Syntax D escr i pti on Defaults The default is no po rt n am e i s c o[...]

2-513 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port negotiation set port negotiatio n T o enabl e or disab le the l ink negotiat ion prot ocol on th e specified port , use t he set port negotiation comm an d. set port negotiation mod/ port { enab[...]

2-514 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port prot ocol set port protocol T o enab le or dis able protoc ol members hip of po rts , use the se t port protocol co mman d. set port protocol mod/port { ip | ipx | group } { on | off | auto } Synt[...]

2-515 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set por t protocol Relat e d Commands show port protocol[...]

2-516 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port qos set port qos T o specify wh ether an inter face is inter preted as a phy sical port or as a VLAN, use the set port qos comm and. set port qos mod/ports... port-based | vlan-based Syntax D escr[...]

2-517 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t port qos This e x ample sho ws the output if yo u change fro m port-b ased QoS to VLA N-based QoS w ith either RSVP or CO PS enabled on the po rt: Console> (enable) set port qos 3/1-48 vlan Qos i[...]

2-518 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s au toqos set port qos autoqos T o appl y the auto matic Qo S feature on a pe r-port basis, use the set port qo s autoqos command. set port qos mod/p ort auto qos tr ust { cos | dscp } set po[...]

2-519 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set por t qos auto qos Relat e d Commands clear port qos autoqos clear qos autoqo s set qos a utoqos show port qos show qos acl inf o[...]

2-520 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s co s set port qos cos To set th e def ault val u e for all pa c kets th at hav e arri ve d throug h an un truste d p ort, use the set port qo s cos command. set port qos mod/ports cos cos_va[...]

2-521 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port qos poli cy-source set port qos policy-source T o set the QoS policy source for all ports in the specifi ed module, use the set port qos policy-sourc e comm and. set port qos policy-source mod/p[...]

2-522 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos policy -source This e x ample sho ws the output if you set the poli cy sourc e to COPS and the switch is set to local configurati on (usi ng the set qos policy-source command): Console> (e[...]

2-523 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port qos t rust set port qos trust T o set the trusted state o f a port, use the set port qos trust comm and; f or e xample, wh ether or no t the pack ets ar ri ving at a port a re trust ed to carry [...]

2-524 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s tr ust Relat e d Commands set port qos set port qos cos show port qos show qos inf o[...]

2-525 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port qos trust-device set port qos trust-device T o co nfigure the t rus t mode on a por t on a speci fic device or module , use the set port qos trust-device comm and. set port qos mod/ports... tru [...]

2-526 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos trust -ext set port qos trust-ext T o conf igure the acce ss port on a Cisco I P phone co nnected to the switch po rt, use the set port qos trust- ext com mand . set port qos mod/ports... tr [...]

2-527 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port rsvp dsbm-election set port rsvp dsbm-election To speci fy whethe r or not t he switch pa rtic ipates i n the Desi gnated Subne t Bandw idth Man ager (D SBM) elec tion o n t h at par ti cula r s[...]

2-528 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt secur ity set port security T o con figure p ort secur it y o n a por t or r ange of po rts, use th e set p o rt se c uri ty command . set po rt s ec u rity mod [ /port... ] [ enable | disable ] [...]

2-529 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port security Defaults The def ault port securit y conf igurati on is as foll ow s: • Port secu rity is disable d. • Number o f s ecur e addre sse s per po rt i s one. • V iolation actio n is s[...]

2-530 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt secur ity Enabling th e automati c conf iguration fea ture automa tically conf igures learned MA C addresses on secure ports. If a secure port shuts down because of a viol ation, if the port is d[...]

2-531 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port security This exampl e shows ho w to set the ag ing type on a port to in activity aging : Console> (enable) set port security 5/1 timer-type inactivity Port 5/1 security timer type inactive. [...]

2-532 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port sec urity-ac l set port security-acl T o specify the por t access control list (P A CL) mode, use the set port security-a cl comm and. set po rt sec uri ty-ac l mo d/ports ... { port-ba sed | vlan[...]

2-533 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt secur ity-acl ACL interface is set to merge mode for port(s) 3/4. Console> (enable) Relat e d Commands sho w port security- acl[...]

2-534 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt speed set port speed T o conf igure the spee d of a port interf ace, use the set port speed comman d. set port spee d mod/ port { 10 | 100 | 1000 | auto | au to -10-10 0 } Syntax D escr i pti on [...]

2-535 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port sync-restart-delay set port sync-restart-del ay T o s pecify the s ync hroni zati on re sta rt d ela y of a por t, use t he s et port sync- resta rt-dela y com mand. set p ort sync -r esta rt-de[...]

2-536 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt tr ap set port trap T o enab l e or di sable t he ope ra tion of the st anda rd Simple N etwo rk M anag emen t Prot ocol (SNM P) link trap (up or down) for a por t or range of ports, use th e set[...]

2-537 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port unicast -flood set port unicast-fl ood T o configure t he swit ch to drop Unicast Flood traffic on an Ether net port, use the set po rt unicast-flood comm and. set port unicast-flood mod/ port {[...]

2-538 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort uni c a s t- fl ood This exam ple sh ows how to disab le unic ast floo d tr affic on modu l e 4, po rt 1 of a switc h: Console> (enable) set port unicast-flood 4/1 enable Unicast Flooding is s[...]

2-539 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port vlan-mapp ing set port vlan-mapping T o configure VLAN mapp ing on a per-port basis, use the set port vlan-ma pping comman d. set port vlan-mapping mod/p ort { ena bl e | disable } set port vlan[...]

2-540 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port vl an-m a pping This exam ple sh ows how to enabl e p ort V LAN m appi ng and to c on figure V LAN ma ppin g o n a n individual port . In this example, mo dule 7 is the 48- port 10/100/ 1000 switc[...]

2-541 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port vo ice inter face dh cp set port voice interface dhcp T o set t he port v oice interf ace for the DHCP , TFTP , an d DNS serv ers, use the set port voi ce in t er fa ce dhcp comma nd. set port v[...]

2-542 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port voi ce i nterface dhcp Exam ples This example sho ws how to enable the port v oice interf ace for the DHCP server: Console> (enable) set port voice interface 7/4-8 dhcp enable Port 7/4 DHCP ena[...]

2-543 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port vtp set port vtp T o enable or disabl e VLAN Trunk Protocol (VTP) on a per-port basis, use th e set port vt p command. set port vtp mo d/port { enable | disable } Syntax Descript ion Defaults VT[...]

2-544 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set power re dundanc y set power redundan cy T o tu rn redun da ncy b etwee n the p ower suppli es on or o ff, use the set power r edundancy comman d. set power re dundancy { enable | disable } Syntax D es[...]

2-545 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set prompt set prompt T o change the prompt fo r the CLI, use the set prompt com mand. set prompt pr ompt_ stri ng Syntax Descript ion Defaults The de fault is the prom pt is set to Console >. Comma n[...]

2-546 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p rot o c o lf il ter set protocol filter T o acti vate or deact i v ate protocol f iltering on Ethernet VLANs and on nontrunkin g Ethernet, F ast Ether net, and Gigabit Et hern et port s, use the set [...]

2-547 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pvlan set pvlan T o bind the iso lated or co mmunit y VLAN to the prim ary VLAN and assign the is olated or community ports to the pri vate VLAN , u se the set pvlan co mma nd. set pvlan pri mary _vl[...]

2-548 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pv lan Exam ples Th is example shows ho w to map VLA Ns 901, 902 , and 903 (isolated or commu nity VLA Ns) to VLA N 7 (the p rima ry V L AN) : Console> (enable) set pvlan 7 901 4/3 Port 4/3 is succe[...]

2-549 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pvla n mapping set pvlan mapping T o map isolated or commun ity VLANs to the primary VLAN on the pr omiscuous port, use the set pvl an mapping comm an d. set pvlan mapping prim ary_v lan { isol ated_[...]

2-550 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pvlan ma pping Relat e d Commands clear pvlan mapping clea r vlan set pvlan set vlan show pvlan show pvlan mapping show vlan[...]

2-551 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos set qos T o turn on or turn of f QoS functionality on the switch, use the set qos comm and. set qos enable | disable Syntax Descript ion Defaults The default is QoS functionalit y is disabled. Co[...]

2-552 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set q os a c l d efa ult- a cti on set qos acl defau lt-action T o set t he ACL default actions, use the set qos acl default-action command. set qos acl default-action ip {{ dscp dscp } | trust-cos | trust[...]

2-553 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl default-action Usage Guid el i nes Configurati ons you make by enter ing this co mmand ar e saved to NVRAM and th e switch an d do not requir e that you ente r the commit comm an d. Only PFC3[...]

2-554 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip set qos acl ip T o cre ate or add IP a ccess lists , use th e set qos acl ip comm and. set qos acl ip { acl_ name } {{ dscp ds cp } | t rust-c os | trust-ippr ec | trust-dscp } [ microfl ow[...]

2-555 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ip Defaults The def ault is there ar e no A CLs. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Configurations yo u make by entering any of these c ommand[...]

2-556 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip The optio nal micr oflow micr ofl ow _na me an d aggrega te aggr egate_name key words and v ariables are used to c onfigure p olici n g in th e A CE. Refer to th e Catalyst 6500 Series Swit[...]

2-557 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ip If the oper ator is positioned af ter the so urce and source-wildca rd, it m ust match t he source p ort. If th e operator is positioned after the destination an d destination- wildca rd, [...]

2-558 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip This example shows ho w to define an ICMP acc ess list: Console> (enable) set qos acl ip icmp_acl trust-dscp my-micro icmp 1.2.3.4 255.255.0.0 172.20.20.1 255.255.255.0 precedence 3 my_a[...]

2-559 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ipx set qos acl ipx T o defin e IPX access lists, use the set qos acl ipx command. set qos acl ipx { acl _name } { dscp dsc p | tru st-cos } [ aggregate aggr egate_name ] { p r otoc ol } { sr[...]

2-560 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ipx The optio nal aggregate aggr e ga te_nam e keyword an d variab le a r e use d to c onfigu re po lic ing in th e A CE. Refer to the Catalyst 6500 Series Swi tch Software Co nfigur a tion Gu[...]

2-561 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ipx Exam ples Th is exam pl e s h ows how to cr ea t e an I P X A CE: Console> (enable) set qos acl ipx my_IPXacl trust-cos aggregate my-agg -1 my_IPXacl editbuffer modified. Use `commit&a[...]

2-562 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl mac set qos acl mac T o define MAC access lists, use the set qos acl mac command. set qos acl mac { ac l_name } { dscp dscp | trust- cos } [ aggregate aggr e g ate_ name ] { src_mac_addr _spec[...]

2-563 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl mac When you ent er the ACL name, foll ow these naming co n ventions: • Maximu m of 31 charac ters long and may include a-z , A-Z, 0- 9, the das h char acter (- ), the un d erscor e char ac[...]

2-564 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl mac Relat e d Commands clea r qos acl commit ro llback show qos acl inf o[...]

2-565 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl map set qos acl map T o attach an A CL to a specifie d port or VLAN, use the set qos acl map comm and. set qos acl map acl_na me { mod/po rt | vlan } [ input ] set qos acl map acl_na me vlan [...]

2-566 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl map This e xample sho ws ho w to attach an A CL to a VLAN: Console> (enable) set qos acl map ftp_acl 4 ACL ftp_acl is attached to vlan 4. Console> (enable) This e xample sho ws what happ[...]

2-567 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos autoqos set qos autoqos T o apply automat ic QoS settings to all ports on the switch , use the set qos autoqos command. set qos a utoqos Syntax Descript ion This c omm and ha s no a rgume nts o r[...]

2-568 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set q os b r id ged -m ic rof low- pol icin g set qos bridged-microflow-polic ing T o enable or disabl e microf low policing of bridge d packets on a per-VLAN ba sis, use the set qos bridged-micr o flow- p[...]

2-569 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos cos-cos-m ap set qos cos-co s-map T o set the CoS- to-CoS map ping on a globa l basis, use the set qos c os-cos-map co mmand . set qos cos- cos-map cos1 cos2 .. . cos8 Syntax Descript ion Default[...]

2-570 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s co s-dsc p-map set qos cos-dsc p-map To set the CoS-to-DSCP mapping, use th e set qos cos-dscp-ma p command. set qos cos- dscp-map dsc p1 dscp2... d scp 8 Syntax D escr i pti on Defaults The def a[...]

2-571 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s drop-thr eshold set qos drop-threshold T o p rogram t he tr ansmi t-queu e an d rece iv e-queue dr op thre sholds on all ports in the system, use t he set qos drop-thr eshold command. set qos dr[...]

2-572 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos drop- thres hol d The number pr eceding the q letter in the port type dete rmines the number of t he queues that the har dware supports. For exampl e, with 2q2 t , the number of queues specif ied i[...]

2-573 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos dscp- cos-map set qos dscp-c os-map To set the DSCP-to-CoS mapping, use the set qos dscp-cos-map command . set qos dscp -cos- map dscp_list:cos_ value ... Syntax Descript ion Defaults The def aul[...]

2-574 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos dsc p-mutat io n-m a p set qos dscp-mutat ion-map T o conf ig ure a DSCP mutation map, use the set qos dscp-mutation-map command . set qos dscp-mutation-map mut ation_ ta ble _id o ld_d scp _lis t:[...]

2-575 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos dscp-m utatio n-table -map set qos dscp-mutat ion-table-map T o conf igure the DSCP mutation table map, use the set qos dscp-mutation-table-map comm and. set qos dscp-mutation-table-map mutatio n[...]

2-576 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos ds cp-r ewri te set qos dscp-rewrite T o glob all y ena ble or disa ble rewriting t he di fferentia ted servi ces c ode poi n t (D SCP) values of p ackets as they go thro ugh the switch, use the se[...]

2-577 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s ipp rec -d sc p- ma p set qos ipprec -dscp-map T o set t h e IP prece dence- to-DSCP map, u se the set qos ippre c-dscp-map comm and. T his c ommand applies to all pack ets and all ports. set qo[...]

2-578 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos ip prec -ds cp-map Exam ples Th is exampl e sh ows how to assign I P pr ece de nce- to-D SCP mappi ng a nd r etur n to the d efault : Console> (enable) set qos ipprec-dscp-map 20 30 1 43 63 12 1[...]

2-579 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos mac-cos set qos mac-c os T o set the C oS value to the M A C addre ss an d VLAN pa ir, use the set qos mac-cos comm and. set qos mac- cos dest _mac vlan cos Syntax Descript ion Defaults Thi s com[...]

2-580 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map set qos map T o map a specif ic CoS value to the transmit- or rec eiv e-priority queues an d the thresholds per a vail able priority queue for all ports , use the set qos map comma nd. set qos[...]

2-581 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos map Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes If you ent er the se t qos map port _type tx | rx q# cos coslist comm and, the follo wing is a list of po s[...]

2-582 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map This example shows ho w to map the CoS value 5 to strict-p riority t ransmit- queue 3/ drop-thr eshold 1: Console> (enable) set qos map 1p2q2t tx 3 1 cos 5 Qos tx strict queue and threshold[...]

2-583 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s p olic ed-d s cp- map set qos policed -dscp-map T o set the m apping of p oliced in -profile DSCPs , use the set qos policed-dscp-map command. set qos policed-dscp-map [ normal-rat e | excess-ra[...]

2-584 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s polic er set qos policer T o c r eat e a po li ci ng rule f or ACL, us e t he set qos policer co mman d. set qos policer { microflow micr oflow_ name } { rate rate } { bu rst burs t } { drop | pol[...]

2-585 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos policer The exc ess rate must be greater than or equal to the norma l rate. The set qos po licer ag gregate command allo ws you to conf igure an aggre gate flo w and a policing ru le for that agg[...]

2-586 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos po lic y-sou rce set qos policy-source T o set t he QoS polic y source, use th e set qos policy-source com mand. set qos policy- source local | cops Syntax D escr i pti on Defaults The def ault is [...]

2-587 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s policy-s ource This example shows the output i f you attempt to set the policy source to COPS-PR and no COPS-PR serv ers a re a v ailabl e: Console> (enable) set qos policy-source cops QoS po[...]

2-588 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s rsvp set qos rsvp T o turn on or turn of f the RSVP f eature on the switch , to set t he time in minutes aft er which the RSVP databases get flushed (when the policy serv er dies), and to set t h [...]

2-589 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos rsvp This e x ample sho ws how to set t he polic y timeout in terv al: Console> (enable) set qos rsvp policy-timeout 45 RSVP database policy timeout set to 45 minutes. Console> (enable) Thi[...]

2-590 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos rxq-ra tio set qos rxq-ratio T o set the amount of p acket b uffer memor y allocated to h igh-priori ty incoming traf fic and low- priority incomin g traf fic, use the set qos rxq-r atio command . [...]

2-591 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos rxq- ratio Exam ples This e xample s ho ws ho w to set t h e rece ive-qu eue size ratio: Console> (enable) set qos rxq-ratio 1p1q0t 80 20 QoS rxq-ratio is set successfully. Console> (enable[...]

2-592 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s st atisti cs export set qos statistics ex port T o globally enable or disable statistics dat a gathering from hardw are, use the set qos statistics expo rt comm and. set qos statist ics export { e[...]

2-593 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos stat istics export aggr egate set qos statistics ex port aggreg ate T o enable or disable statistics data expo rt on an aggreg ate policer , us e th e set qos statist ics exp ort aggregate comm a[...]

2-594 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos sta ti st ic s expor t des t ination set qos statistics ex port destinatio n T o specify the statisti cs data exp ort destination address, use the set qos statistics export destination comm and. se[...]

2-595 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos statistic s export destination Relat e d Commands set qos statist ics export show qos statistics export inf o[...]

2-596 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set q os sta ti st ics e x por t in te rva l set qos statistics export interval T o specify ho w often a p ort or aggre gate policer statistics data is read and e xported, u se t h e set qo s statistics ex[...]

2-597 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos stati stics export port set qos statistics ex port port T o enable or disa ble statist ics data e xport on a por t, u s e t h e set qos statis tics ex port po rt comm and. set qos statist ics exp[...]

2-598 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s txq -rati o set qos txq-ratio T o set the amount of pack et b uf fer memory allocat ed to high-p riority tra f f ic and lo w-priority traf fic, use the set qos txq-ra tio comma nd. set qos t xq-ra[...]

2-599 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos txq-ratio Exam ples Th is e xample shows ho w to set the transmit-queue size ratio: Console> (enable) set qos txq-ratio 2q2t 75 25 QoS txq-ratio is set successfully. Console> (enable) Relat[...]

2-600 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wred set qos wred T o conf igure the W RED thre shold pa rameters fo r the specif ied por t type, us e the set qos wred comm and. set qos wred port_ type [ tx ] queue q# {[ thr1Lo :] th r1Hi } {[ [...]

2-601 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos wred Relat e d Commands clear qos co nf ig show qos inf o[...]

2-602 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wrr set qos wrr To specify the weights th at d etermine ho w many pa ckets will transmit out of one queue before switchin g to the othe r queue, use the set qos wr r comm and. set qos wrr por t_ty[...]

2-603 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos wrr For 1p2q2 t and 2q2t , on ly two queues can be set; the third queue is strict priority . For 1p3q1 t , three qu eues can b e set; a fourth queue is strict priority . SRR is on ly su ppo rte d[...]

2-604 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set radius attribute set radius attribute T o set attrib utes to the RADIUS A CCESS_REQUEST pack et, use the set radius attribute command. set radius attribute { number | name } in clude-in-access-r eq { e[...]

2-605 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set radi us deadti me set radius dea dtime T o set the time to skip RADIUS serv er s that do not re ply to an au thentic ation request , use th e set radius deadtime comman d. set radius deadtime minutes[...]

2-606 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set radius key set radius key T o set the encryptio n and authenticatio n for all communi cation betwee n the RADIUS client and the serv er , use th e set radius key comma nd. set radius key ke y Syntax D [...]

2-607 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ra dius retrans m it set radius retransmit T o speci fy the numbe r of tim es the RA DI US servers are trie d be fore giving up on the server , use the set radius retransmit com mand. set radius retr[...]

2-608 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set radius server set radius server T o set up the RA DIU S server, use the set radius ser ver command. set r adi us s erver i paddr [ a uth- port port ] [ ac ct-port po rt ] [ primary ] Syntax D escr i pt[...]

2-609 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ra dius time out set radius timeout T o set the time between retransm issions to the RADIUS server , use the set radius timeout comman d. set radi us tim eou t secon ds Syntax Descript ion Defaults T[...]

2-610 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ra te - li mit set rate-limit T o enable, disable, or set t h e Layer 2 rate li miters, use the set rate-limit command. set ra te-li mit { l2pdu | l2port-security | l2protocol-tunnel } { ena ble | disa[...]

2-611 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ra t e- l im i t • The sof tware alloc ates an L TL in dex for th e fram es. • The L TL index is sub mitted to the f orwardin g engine for aggreg ate rate li miting of all the associated fram es.[...]

2-612 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set rcp usern ame set rcp username To sp eci fy you r userna m e for r cp f ile tr ans fers, use th e s et rcp usern ame command. set rcp u sernam e userna me Syntax D escr i pti on Defaults There are no d[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set rgmp 2-613 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set rgmp T o enab le or dis able the Ro uter -Ports Group Ma nage ment P rotoc ol (RGM P) featur e on the swi tch, us e the set r gmp command. set rgmp { ena ble | disable } Syntax Descript ion D[...]

2-614 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set rspan set rspan T o create re mote Switched Port An alyzer ( SP AN) sessions, use the set rspan comm and. set rspan disable source [ rspan_vlan | all ] set rspan disable session session_nu mber set rps[...]

2-615 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s s et rs pa n Defaults The de faults are as fo llows: • Remote SP AN is disabled. • No VLAN f ilterin g. • Monitoring multic ast traf f ic is enabled. • Learni n g i s en ab led. • inpkts is dis[...]

2-616 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set rspan If you pr ovide a session numbe r , b ut the sa me session n umber f or the same session ty pe is pr esent in the SP AN database already , the session number that you enter ov erwrites the SP AN [...]

2-617 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set secur ity acl adj acency set security acl adjac ency T o set an entr y for th e adjac ency ta ble, u se the set securi ty acl adjace ncy command . set sec urit y a cl ad ja cenc y adjacenc y_name des[...]

2-618 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl a rp-inspec tion set security acl arp -inspecti on T o configure Ad dress Res olution Proto col (ARP) inspection fe ature s, use the set se curity acl arp-inspection comman d. set securi[...]

2-619 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl arp-inspection The follo wing MA C addresses are il lega l: • 00-00-00- 00-00 -00 • Multicas t MA C addre sses • ff-f f -ff-f f-ff-ff Note If you do not enter t he drop ke yword, t[...]

2-620 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl c apture-por ts set security acl capt ure-po rts T o set the ports (specif ied with the captur e option in the set security acl ip , set security acl ipx , and set security a cl mac co m[...]

2-621 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set secur ity acl cr am set security acl cra m T o enable a tes t r u n o f the C RAM fe atu r e o r to en able the CRAM fe ature, use the se t s ec u rit y ac l cra m comm and. set securit y acl cram te[...]

2-622 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl cram This exam ple sh ows how to ma nual ly execute th e CRA M fe at ure: Console> (enable) set security acl cram run Traffic may be disrupted for some time while programming hardwar[...]

2-623 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl feature ratelimit set security acl featu re ratelimit T o s pecify a r ate limi t in pa ckets p er se co nd for AR P insp ect ion, DH CP sn oopin g, a nd 802.1 X DHC P feat ures, u se th[...]

2-624 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip set security acl ip T o c reate a n ew en try i n a stan dard IP VA CL a nd ap pend th e ne w en try at th e end of t he VA CL, u se the set security a cl ip command. set security a [...]

2-625 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ip deny Block s t r aff ic f rom the source I P a dd ress. src_ip_spec Source IP addre ss and the sourc e mas k. See the “Usa ge Guideline s” secti on fo r the format. bef ore editbu[...]

2-626 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip Defaults Ther e are no def ault ACLs an d no defa ult ACL-V LAN mappi ngs. By defa ult, ARP is ena bled. By default , D HC P sno oping i s disab led on al l V LAN s. Comma nd T ypes [...]

2-627 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ip • Use the ke yword any as an abbrev iation for a sour ce and sou r ce-wil dcar d of 0. 0.0.0 255.2 55.255 .25 5. • Use host source as an abbre viation fo r a sourc e and sour ce-w[...]

2-628 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip If a L ay er 4 pr otoc ol i s spec ified, you c an ent er the fo llowing sy nt ax : set security a cl ip { acl_name } { permit | deny | redi re c t mo d_num/port _num } { pr oto col [...]

2-629 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ip Console> (enable) set security acl ip IPACL1 redirect 3/1 ip 3.7.1.2 0.0.0.255 host 255.255.255.255 precedence 1 tos min-delay IPACL1 editbuffer modified. Use ‘commit’ command [...]

2-630 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx set security acl ipx T o cr ea te a new entry in a stan dard IPX V ACL and to ap pe nd the new entry a t the e nd of the V ACL, use the set security acl ipx command . set security a[...]

2-631 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ipx If you use the capture keyword, the ports that captu re the traf fic and t ransmit out are spe cified by ent erin g th e set se c uri t y a cl ca ptu r e-p or ts co mmand . When you [...]

2-632 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx Relat e d Commands clea r security acl clear secur ity acl capture- ports clear s ecurity ac l map commit set security a cl map set secur ity acl captur e-ports show security acl sh[...]

2-633 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl log set security acl log T o c on figure th e s ecur i ty ACL log tab l e, us e th e set secur ity acl log comman d. set secu rit y a cl l og maxfl ow max_flows set se c uri t y a cl log[...]

2-634 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl log This exampl e shows ho w to disabl e rate lim iting: Console> (enable) set security acl log rate-limit 0 CAUTION: Rate limit for logging eligible packet is disabled. 2003 Apr 07 [...]

2-635 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl mac set security acl mac T o cr eat e a new entry in a non- IP or non- IPX pro to col V A CL an d to app en d th e new entry at the end of the V A CL, use the set security a cl mac comma[...]

2-636 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl mac • Must start with an alp ha char acter and must be unique a cross all A CLs of all typ es • Case sensiti ve • Cannot be a num be r • Must n ot be a keyword; keywords to avo[...]

2-637 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl mac commit set security a cl map set secur ity acl captur e-ports show security acl sho w securi ty acl ca ptur e-ports[...]

2-638 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl map set security acl map T o map an e xisting A CL to a port or to a VLAN or to enable A CL statistics, use the set secur ity acl map comm and. set security a cl map a cl_ nam e { m od[...]

2-639 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl map If per-VLAN stati stics are e nabled on a VLAN, subseque nt maps co nfigured on the same VLAN will also ha ve per -VLAN statistics enabled. If per -VLAN statistics are disab led on a[...]

2-640 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl map Relat e d Commands clea r security acl clear s ecurity ac l map commit set po rt sec uri ty-ac l sho w port security- acl show security acl show security acl map[...]

2-641 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl stati stics set security acl statisti cs T o enable ag gre gated A CL statis tics on a per -A CL basis , use the set security acl statistic s command. set securit y acl statistic s { all[...]

2-642 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp set snmp T o enable or disable the processing of SNMP requests to the switch and SNMP traps from the switch, use the set snmp comm and. set snmp { en ab le | disable } Syntax D escr i pti on Defa[...]

2-643 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp access set snmp access T o d efine th e acc ess ri ght s of an SN MP grou p, u se the set snmp access command. set snmp acc ess [ -hex ] { groupname } { security- model { v1 | v2c }} [ rea d [ -[...]

2-644 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc ess • notify notifyvie w is NULL OID. • cont ext contextname is a NULL string. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes If you use sp ecial char[...]

2-645 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp ac cess-list set snmp access-list T o specify an access lis t number fo r a host or group of host s, use the set snmp access-list command. set snmp acc ess-list a ccess_numb er IP_address [ ipma[...]

2-646 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc ess-li st Relat e d Commands clear sn mp access-lis t show snmp access-list[...]

2-647 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t s nm p b u ffe r set snmp buffer T o set t h e siz e of t h e SNMP UDP sock et recei ve b u f fer , us e the set snmp buffer command. set snmp buffer { pac ket s } Syntax Descript ion Defaults 95 pa[...]

2-648 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp cha ssis-a lias set snmp chassis-alias T o set t he chassis al ias and sa ve it i n NVRAM and in the c onfi guration f ile, use the se t snmp chassis-alias command. set snmp chassis-a lias [ chas[...]

2-649 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp community set snmp community T o set SNMP comm unities and associat ed access type s, use the set snmp community command. set snmp community { rea d - on l y | read-wr ite | read-wr ite-all } [ [...]

2-650 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp communi ty There are three co nf igurab le SNMP communi ties, one fo r each acce ss type. If you do not sp ecify the comm unity stri ng, the co mmunit y string configur ed for tha t acces s type i[...]

2-651 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp community-ext set snmp community-ext T o set ad ditional c ommunity stri ngs, use the set snmp community-ext comman d. set snmp community- ext community_string { rea d- o n l y | re a d - w ri t[...]

2-652 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp community-ext This e xample sho ws ho w to change the ac cess num ber to the comm unity str ing: Console> (enable) set snmp community-ext private1 read-write access 3 Community string private1 [...]

2-653 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp e xten ded rmon n etflow set snmp exten dedrmon netfl ow T o enabl e or disab le the SNMP extend ed RMON support for t he N AM modul e, use the set snmp extendedrmon netflow com mand. set snmp e[...]

2-654 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp gr oup set snmp group T o establi s h th e r elat i ons h ip bet ween an SNMP g rou p an d a us e r with a sp ecif ic security mo d el, use th e set snmp group command. set snmp group [ -he x ] {[...]

2-655 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp ifalias set snmp ifalias T o set t he SNMP inte rface alias, us e the set snmp ifalias co mman d. set snmp ifalias { ifIndex } [ ifAlias ] Syntax Descript ion Defaults Thi s command has no de fa[...]

2-656 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp info rm set snmp inform T o conf igure the handling of SNMP info rm requests, use the set s nmp inf orm co mmand. set snmp inform va lue set snmp inform r cv r_address r c vr_com munity [ port r [...]

2-657 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp inform If the number of inf orm requests that are pending in the queue exceeds the configured l imit, the oldest info rm request is remov ed to free up space f or new inform re quests. Exam ples[...]

2-658 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp noti fy set snmp notify T o set the notifyname entry in the snmpNotifyT able and the n otifytag entry in the snm pT ar getAddrT able, use the set snmp notify command. set snmp not ify [ -hex ] { [...]

2-659 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set s nmp rm on set snmp rmon T o ena ble or disab le SNMP RM ON support, use the se t snmp rmon comma nd. set snmp rm on { enable | disable } Syntax Descript ion Defaults The default is RMON suppor t is[...]

2-660 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp rm onm e mory set snmp rmonme mory T o set t he memory usage limit in pe rcentage, use th e set snmp rmonmemory command. set snmp rmonmemory per centage Syntax D escr i pti on Defaults The de faul[...]

2-661 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp targetad dr set snmp t argetadd r T o conf igure the SNMP tar get address entr ies in the snmpT argetAdd ressT able, use the set snmp targetaddr co mmand . set snmp ta rgetaddr [ -he x ] { addr [...]

2-662 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etadd r Usage Guid el i nes If you us e speci al char act ers for the addrname, paramsn ame, tag, and tagv al ue (nonprintab le delim iters for th ese p aram ete rs), you m ust u se a hexade [...]

2-663 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set sn mp targetp arams set snmp targ etparams T o conf igure the SNMP paramet ers used in the snmpT ar getPa ramsT able when genera ting a message to a target, use th e set s nm p ta rget par ams co mma[...]

2-664 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etpara ms Exam ples This example sho ws how to set target parameter s in the snmpT argetP aramsT able: Console> (enable) set snmp targetparams bar user joe security-model v3 message-proces[...]

2-665 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp trap set snmp trap T o enable or disable the diffe rent SNMP traps on the system or to add an entry into the SNMP authenti cation trap recei ver ta ble, u se the set sn mp tr ap command. set snm[...]

2-666 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp tra p Defaults The def ault is SNMP traps are disabled. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes This c omm and is not sup port ed by t he NAM. An IP pe[...]

2-667 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp trap Console> (enable) This e xample shows ho w to enable all traps: Console> (enable) set snmp trap enable All SNMP traps enabled. Console> (enable) This example sho w s ho w to disabl[...]

2-668 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp user set snmp user T o conf igure a ne w SNMP user , use the set snmp user comma nd. set snmp user [ -hex ] { usernam e } { rem o t e { engine id }} [ authe ntica tion { md5 | sha | authpassw or [...]

2-669 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp use r This e x ample sho ws how to set a specif ic username, au thenticatio n, and auth password: Console> (enable) set snmp user John authentication md5 arizona2 Snmp user was set to John au[...]

2-670 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp view set snmp view T o conf igure the SNMP M IB vie w , use the set snmp view comma nd. set snmp view [ -hex ]{ viewname }{ subtr ee }[ mask ] [ included | excl uded ] [ volatile | nonvolatile ] [...]

2-671 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp view This e x ample sho ws the response whe n the subtree is inc orrect: Console> (enable) set snmp view stats statistics excluded Statistics is not a valid subtree OID Control> (enable) R[...]

2-672 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp an set span T o enable or disa ble SP AN and to set up the switch por t and VLAN analyzer for mu ltiple SP AN sessions, use the set span command. set span disable [ dest_m od/dest_p ort | all ] set [...]

2-673 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set span Defaults • SP AN is disabled, • No VLAN f ilterin g is enabled. • Multicast is enabled. • Input pac kets ar e disa bled. • Learni n g i s en ab led. • The permi t-list feature is dis[...]

2-674 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp an T o speci fy a unique SP AN session ac ross all types of SP AN sessions ( local SP AN, R SP AN, and ESP AN), ent er th e session session_ number op tion. I f you do not specify a SP AN session n [...]

2-675 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spant ree backb onefast set spantree backbone fast T o en able or disa ble t he span ning t ree Backbo neF ast C on ver gence feat ure, use th e set s pantr ee backbonefast comman d. set spantr ee ba[...]

2-676 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-f il t er set spantree bpdu-filter T o enable or disable BPDU pack et fi lterin g on a por t, use the set spant ree bpdu-filt er comman d. set spantr ee bpdu-fil t er mod/ port { enable [...]

2-677 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spant ree bpdu- guard set spantree bpdu-guard T o ena ble or dis abl e span ning tree BPDU g uard on a port, use the set spantree bpdu-guard comman d. set spantr ee bpdu-guard mod/ port { ena ble | d[...]

2-678 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-s ke wing set spantree bpdu-skewin g T o en able or disable collection of t h e sp anning tree BPDU sk ewing detect ion statist ics, us e the set spantree bpdu-skew ing command . set spa[...]

2-679 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set s pan tre e cha nne lco st set spantree channelco st T o set t he channel p ath cost and to auto matically a djust the cha nnel port costs, use the set spantree channelcost command . set spant ree ch[...]

2-680 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee chann elcost Relat e d Commands clear la cp-channel stati stics set channelpr otocol set lacp-channel sy stem-pr iority set port lacp-channel set spant ree cha nnelvlancos t show l acp-channe[...]

2-681 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree channel vlancost set spantree channelvla ncost T o set the channel VLAN path cost an d adjust the port VLAN costs of the por ts that belong to the chan ne l, u se th e set spant re e channel[...]

2-682 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee defau lt cos tmode set spantree defaultcostmode T o s peci fy t he s p anni ng tre e de fau lt por t cost mode , use th e set spa n tree defau lt costm ode com ma nd . set span tree de fault [...]

2-683 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree defaultcostmode Exam ples Th is exampl e sh ows how to set th e spanni ng tr ee d efaul t po rt cost mod e: Console> (enable) set spantree defaultcostmode long Portcost and portvlancost s[...]

2-684 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntree disa ble set spantree disable T o disabl e the spanni ng tree alg orithm for all VLA Ns or a specif ic VLAN or disable s panning tree inst an ce , us e th e set spa ntree disable command. set[...]

2-685 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spant r ee disable This e x ample sho ws how to disa ble spanning tree fo r a specif ic instance: Console> (enable) set spantree disable mistp-instance 2 MI-STP instance 2 disabled. Console> (e[...]

2-686 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee enabl e set spantree enabl e T o enable the span ning tree alg orithm fo r all VLANs, a specif ic VLAN, a specif ic instance, or all inst an ce s, use th e set spantr ee enable com mand. set [...]

2-687 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee enable Relat e d Commands set spantree disable show spantr ee[...]

2-688 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee fwddel ay set spantree fwddelay T o set the bridge forw ard delay for a VLAN or an instance, use the set spantree fwddelay command . set span tree fwdd el ay de lay [ vlans ] set span tree fw[...]

2-689 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree fwddelay This e xample shows ho w to set the bridge for ward delay for the IST and all MST instance s to 15 seconds: Console> (enable) set spantree fwddelay 15 mst MST forward delay set t[...]

2-690 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee globa l-d efault set spantree globa l-default T o s et th e gl ob al s ta tes on th e sw it ch, use th e set spa ntree globa l-def ault command. set sp antr ee glob al-defa ult portfa st { en[...]

2-691 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee global -default This exampl e shows ho w to disabl e the global BPDU filter state on the switch: Console> (enable) set spantree global-default bpdu-filter disable Spantree global-default[...]

2-692 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee guard set spantree guard T o enabl e or disab le the spa nning tr ee roo t guard or loop gua rd feat ure on a per-port basis, use t he set spantree guar d command. set spantree gua rd { none [...]

2-693 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree guard Exam ples Th is exampl e sh ows how to en abl e r oot gua rd : Console> (enable) set spantree guard root 5/1 Rootguard on port 5/1 is enabled. Warning!! Enabling rootguard may resul[...]

2-694 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee h e llo set spantree hello T o set the bridge hello time for a VLAN or an instance, use the set spantree hello command. set spantree hello interval [ vlans ] set spantree hello interval mis[...]

2-695 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree hello This example sho ws how to set the spantree hello time for an instance to 3 seconds: Console> (enable) set spantree hello 3 mistp-instance 1 Spantree 1 hello time set to 3 seconds. [...]

2-696 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee li nk - ty pe set spantree link-type T o conf ig ure the link type of a port, use the set spantr ee link-type co mmand. set span tree lin k-ty pe mod/po rt { auto | poin t-to -point | share[...]

2-697 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee macreduction set spantree macreduction T o enable or disable the spanni ng tree MA C address reduct ion feature, us e the set spantree macr educti on comman d. set spantr ee macreduc tion e[...]

2-698 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee maxage set spantree maxage T o set the bridge max imum aging time for a VLAN or an instance , u se the set spantree maxag e comm and. set spantree max age agi ngtime [ vlan s ] set spantree m[...]

2-699 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee maxage This e xample shows how to se t the max imum aging ti me for t he IST and all M ST instances to 20 seconds: Console> (enable) set spantree maxage 20 mst MST max age set to 20 seco[...]

2-700 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree m ode set spantree mode T o configure the type of Sp anning T ree Proto col mode to run, use the set spantree mode comman d. set spantree mode { mistp | pvst+ | mistp-pvst+ | mst | rapid-pvst[...]

2-701 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set span tree mode If yo u ch a n g e the sp ann ing tree mode from PVST + to MISTP or MI S T P t o P V S T + , the STP mode previously running stops, all the in for m ation co llected at runtime is used[...]

2-702 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp ant ree mst set spantree mst T o co nf igure the map ping of VLANs to a n MST ins tance o r to c onf igur e port s that are connected to neighb ors that are in pre-st andar d MST mode, use the set s[...]

2-703 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree m st Ente rin g th e set spantree mst mod/port auto comman ds reverts a port th at is in pr e-stand ard M ST mode back to stan dard M ST mode. In stand ard MST mode , a port on a neighbo r t[...]

2-704 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee mst co nfi g set spantree mst config T o change the MST regi on informa tion, us e the set spantree mst conf ig command. set spant ree mst co nf ig [ name name ] [ re vision numbe r ] set spa[...]

2-705 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree mst config Exam ples Th is example shows ho w to configure an M ST region an d to giv e that regio n a name and revision number: Console> (enable) set spantree mst config name test-lab re[...]

2-706 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee m st li n k -ty pe set spantree mst link-type T o conf ig ure the link type of a port, use the set spantree mst link-type co mmand. set span tree mst li nk-ty pe mod/po rt { auto | p oint -[...]

2-707 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree ms t maxhops set spantree mst maxhops T o s et th e spa nni ng tr ee h op co unt , us e t he set spantree mst ma xhops co mman d. set spantree mst max hops ma xhops Syntax Descript ion Defau[...]

2-708 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee m st v lan set spantree mst vlan T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst vla n command. set spantree mst instance vlan vlan Syntax D escr i pti on[...]

2-709 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set sp ant ree po rt cost set spant ree port cost T o set the path cost for a por t, use the set span tree port cos t comma nd. set spant ree po rtcost mod/port co st [ mst ] Syntax Descript ion Defaults[...]

2-710 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp ant ree por tcost Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes If the sp anning t ree mo de i s shor t and l ong or M IST P , v a lid c ost values ar e from 1 [...]

2-711 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree portfast set spantree port fast T o allo w a port that is connected to a single workstatio n or PC to start faster when it is connec ted, use the set spantree portfast command. set spantree [...]

2-712 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portfas t bpdu-fi lt er set spantree portfast bp du-filter T o ena ble o r di sab le spanni ng tree Po rtFast BPDU packe t filtering on a p ort, use the se t s pantree portfast bpdu-f ilter c[...]

2-713 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set span tree portfa st bpdu-guard set spantree portfast bp du-guard T o ena ble o r di sab le spanni ng tree Po rtFast BPDU guard o n a por t, u se the se t spantree port fast bpdu-guard comman d. set s[...]

2-714 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancecos t set spantree port instanceco st T o assign the pa th cost of the port for the sp ecified in stances , use the set spantre e portinstanceco st comm and. set spantr ee portin[...]

2-715 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree po rtinstancecost Exam ples Th ese exampl es show how to use th e set spantree portinstancecost command and explic itly specify the path cost of a port : Console> (enable) set spantree po[...]

2-716 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancepri set spantree portinstan cepri T o set the p ort prior ity for inst ances in th e trunk p ort, u se the set spantree portinstancepri comman d. set spant ree port instancepri m[...]

2-717 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree portinstan cepri This exampl e shows ho w to set the por t priori ty for mod ule 8, port 1, on MST inst ance 2 : Console> (enable) set spantree portinstancepri 8/1 31 mst 2 Port 8/1 insta[...]

2-718 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portp ri set spant ree port pri T o s et the brid ge pr iori ty for a s pa nning t ree po rt, use t h e set spantree portpri command . set spant ree po rtpri mod/port priority [ mst ] Syntax [...]

2-719 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set sp ant re e po rtv l an cos t set spantree port vlancost T o assign a lower path cost to a set of VLANs on a port , use the set spantree port vlancost command. set spantr ee por tvlancost mod/po rt [[...]

2-720 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntr ee portv la ncost Usage Guid el i nes Follow these guidel ines wh en you set th e path cost for VLANs on a port: • The cost va lue specified is used as the path cost of the port for the speci[...]

2-721 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee portvlanp ri set spantree portvlanpri T o s et the port priority fo r a subset of VL ANs in the trun k port, use the set sp antree port vlanp ri comm and. set spant ree port vlanpri mod/por[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set spantree priority 2-722 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set spantree priority T o set th e bridge priority for a VLAN or an inst ance whe n PVST+ or MI STP is runnin g, use the set spantree priority command. set spantree priorit y bridge_[...]

2-723 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree priority This exam ple sh ows how to set the br idge pri orit y fo r M ST inst anc e 0: Console> (enable) set spantree priority 28672 mst 0 MST Spantree 0 bridge priority set to 28672. Co[...]

2-724 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot set spantree root T o set the primary o r secondar y root fo r specifi c VLANs, all VLANs of the switch, or an instance, use the set spantree root command. set spantree root [ secondary[...]

2-725 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree root This c omm and incr e ases p ath co sts to a value g reate r than 3 000. If you en able M ISTP , you cann ot set th e VL AN r oot. If y ou ena bl e PVST+ , you ca nnot set t he instan c[...]

2-726 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot VLANs 1-10 bridge hello time set to 2 seconds. VLANs 1-10 bridge forward delay set to 13 seconds. Switch is now the root switch for active VLANs 11-15,18-20. Switch could not become roo[...]

2-727 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree uplinkfast set spantree uplinkfast T o enab le fast switcho ver to altern ate ports when the root port fails, use the set spantr ee uplinkfast command. This comman d applies to a switch , no[...]

2-728 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee uplinkf ast Y ou do no t have to turn on t he all -prot ocol s feat u re on Ca talyst 650 0 ser ies swi tche s tha t have both the UplinkFas t a nd pro t oco l filtering f eat ur es en ab led[...]

2-729 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ss h mode set ssh mode T o set t he Secu re Shell (SSH) v ersion, use the set ssh mode command . set ssh mode { v1 | v2 } Syntax Descript ion Defaults If you do not spe cify eit her th e v1 or the v2[...]

2-730 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ss h mode Relat e d Commands clear ss h mode set au then tic ation e nab le set au then tic ation l ogin show ssh[...]

2-731 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set summertime set summertime T o spec ify whet her the sys tem s hould set t he clo ck ahea d o ne hou r during daylig ht saving time , use the set summertime command. set summertime { enable | disable [...]

2-732 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set su mmertim e This exam ple sh ows how to prevent the syst em f rom set ti ng th e c lock a head on e ho ur dur ing dayl ight saving time: Console> (enable) set summertime disable Summertime disabled[...]

2-733 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system baud set system baud T o set th e consol e port ba ud rate, u se the set syst em baud comman d. set system ba ud ra te Syntax Descript ion Defaults The de fault is 9600 bau d. Comma nd T ypes [...]

2-734 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system con tact set system contact T o i d en tif y a co ntac t p ers on for t h e sys te m, use th e set sy stem cont act co mmand . set system cont act [ cont act_string ] Syntax D escr i pti on Defa[...]

2-735 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system core-du mp set system core-dump T o enable or disable the core dump feature , use the set system core-dump co mmand . set system c ore-dump { ena ble | disable } Syntax Descript ion Defaults T[...]

2-736 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system cor e-file set system core-file To specify the cor e image filename, use t h e set s ys te m core- file comm and. set system c ore-file { de vice :[ f ilename ]} Syntax D escr i pti on Defaults [...]

2-737 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system countryco de set system countryco de T o s peci fy t he c ou ntry w here the syste m is physi ca lly loc ate d, us e the se t system countrycode comm and. set system c ountryco de code Syntax [...]

2-738 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system cra shinfo set system crashinfo T o permit the system t o write a crash information f ile, use t he set system crashinfo comma nd. set system c rashinfo { ena ble | disable } set system c rashin[...]

2-739 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system cr ashinfo Relat e d Commands show system[...]

2-740 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system cro ssbar -fa llback set system crossbar-fal lback T o selec t the ac tion tak en when th e Switch Fabr ic Module fails, u se the set syst em crossbar -f allback comm and. set system crossbar-fa[...]

2-741 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system highava ilability set system highavailability T o enable or disable h igh system a vai lability fo r the switc h, use the set system highav ailability comm an d. set system higha vailabilit y [...]

2-742 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set syst em higha vailabi lity ve rsi oning set system highavailability versioning T o ena ble a nd di sabl e su ppo rt for sup erv isor engi ne im age versi onin g, use t h e set sy stem higha vailability[...]

2-743 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system highavailability versioning Exam ples This example sho ws how to enable high-av ailability v ersioning: Console> (enable) set system highavailability versioning enable Image versioning enab[...]

2-744 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem info-l og set system info-log T o log the output of speci fied show com mands to a server for tro ubleshoo ting and de bugging, use t he set system inf o-log comma nd. set system info-log { ena[...]

2-745 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system info-log Usage Guid el i nes When you enter the sh ow comman d whos e outp ut is t o be l ogg ed, y ou mus t type a del imiti ng chara cter with no sp ac es on ei ther side of the com ma nd. Y[...]

2-746 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem l ocation set system location T o identify the location of the system, use the set sy stem l oca tion command. set system lo cation [ location_string ] Syntax D escr i pti on Defaults Thi s com[...]

2-747 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s s et s yst em mo dem set system modem T o enable or disable modem co ntrol lin es on the con sole port , use the set system modem command. set system mo dem { en a b le | disable } Syntax Descript ion De[...]

2-748 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem na me set system name T o conf igure a name for the system , use the set system name comman d. set system na me [ name_st ring ] Syntax D escr i pti on Defaults The de fault is no system na me [...]

2-749 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system profile set system profile T o conf igure a system prof ile file, u se the set system prof ile command . set system profile device : filename set system profile { enable | disable } mod_list S[...]

2-750 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem profil e • The ALL_ MODULE_PO R TS ke yword must be within a module se ction that is e xplici tly def ined, as all m odul e se c tions are explicitl y defined in Catalys t opera t ing syst em[...]

2-751 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set syst em supervisor- update set system supervisor-update T o con figure t he Er asa ble Progr am mabl e L ogic Device (E PLD) upg rade p roce ss, use the set sy stem supervisor -update com mand . set [...]

2-752 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set syst em su per viso r-updat e This exam ple sh ows how to disab le EPL D up gra des : Console> (enable) set system supervisor-update disable Supervisor EPLD update during reset is disabled. Console&[...]

2-753 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t system switchmode allow set system switchmode allow T o conf igure the switch ing mode fo r the syste m, use the set system switch mode allow command. set system switchmode allow { truncated | bus-o[...]

2-754 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem switch mode a llow This example sho ws how to set the switching mode to bus- only: Console> (enable) set system switchmode allow bus-only System switchmode allow set to bus-only. Console>[...]

2-755 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system syslog-dump set system syslog-dump T o write system messag es in the syslog bu ffer to a flash f ile before the system fail s, use the set system syslog-dump co mmand. set system s yslog- dump[...]

2-756 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem s yslog-f ile set system syslog-file T o speci fy the f lash de vice and f ilename for the sys log dump when the system f ails, use the set system syslog-file comm and. set system sy slog- file[...]

2-757 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set tacacs attempts set tacacs attempts T o configure t he m aximum number of login a ttempt s allowed to the T A CA CS+ server, use the set taca cs attemp ts com mand . set tac acs a ttemp ts coun t Syn[...]

2-758 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set taca cs directedre quest set tacacs directed request T o en able or disa ble the T A CAC S+ di rected- request option, u se th e set tacacs direc tedrequest comman d. When enabl e d, you ca n di rect a[...]

2-759 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set tacacs key set tacacs key T o set the ke y for T A CA CS+ authentication and encry ption, use the set ta ca cs ke y co mmand. set ta cacs k ey key Syntax Descript ion Defaults The def ault v alue of [...]

2-760 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set tacacs server set tacacs serv er T o de fin e a T A CAC S+ ser ver , use the set taca cs s erve r co mm and. set taca cs ser ver ip_addr [ primary ] Syntax D escr i pti on Defaults Thi s command has no[...]

2-761 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set tacacs timeout set tacacs time out T o set t he response tim eout interv al for the T A CA CS+ serv er daemon , use the se t taca cs timeou t command. The T A CA CS+ server must respond to a T A CA C[...]

2-762 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set test diagf ail-act ion set test diagfail-action T o set t he action th at the supervisor en gine tak es when a diagnos tics test f ails, u se the set tes t diagfail-ac tion command. set tes t di agfa i[...]

2-763 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set test di aglevel set test diaglevel T o s et th e di a gnos tic l evel, use t he set te st diaglevel comm and. set test dia glevel { complete | minimal | bypass } Syntax Descript ion Defaults The defa[...]

2-764 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ti me set time T o change the time of day on the system cl ock, use the set time com mand. set time [ d ay_ of_week ] [ mm/ dd /yy ] [ hh:mm:ss ] Syntax D escr i pti on Defaults Thi s command has no de[...]

2-765 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t tim ez on e set timezone T o set the time zone for the system, use the set timezo ne com mand. set timezone [ zone_n ame ] [ hou rs [ minutes ]] Syntax Descript ion Defaults The default is the time [...]

2-766 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set traffic m on itor set traffic monitor T o conf igure the thresh old at wh ich a hig h-traf fic log w ill be generated, u se the set traffic monitor comm and. set tra ffic monitor thre shold Syntax D es[...]

2-767 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set trunk set trunk T o conf igure trunk ports an d to add VLANs to the allow e d VLAN list for existin g trunks, use the set trunk comm and. set trunk mod/po rts { on | off | desirable | auto | no negot[...]

2-768 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set trunk The fo llo wing usage guidel ines apply when using t he set trun k command : • If a tru nk- type keyword ( isl , dot1 q , negotiate ) is not specif ied when conf iguring an Ether Channel trunk,[...]

2-769 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set trunk This exam ple sh ows how to co nfigure a tr un k wi thou t a ny VLA Ns: Console> (enable) set trunk 7/1 on none dot1q Removing Vlan(s) 1-4094 from allowed list. Port 7/1 allowed vlans modifi[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set udl d 2-770 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set udld T o enab le or dis able the UDLD i nform ation displ ay on s pecif ied port s or glo ball y on all ports , use t he set udld command. set udld enable | disable [ mod/port ] Syntax Descr[...]

2-771 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set udld This exam ple sh ows how to disab l e the UD LD m es sag e displ ay f or po rt 1 o n m odu le 2: Console> (enable) set udld disable 2/1 UDLD disabled on port 2/1. Warning:UniDirectional Link [...]

2-772 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set udld aggres si ve-mod e set udld aggressive-mo de T o enable or disable the UDLD aggr essi ve mode on sp ecif ied ports, us e the set udld aggressiv e -mode comm and. set udld agg ressive-mode enable |[...]

2-773 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set udld interval set udld interval T o set t he UDLD message inte rva l timer , use the set udld interv a l com mand. set udld interval interval Syntax Descript ion Defaults The de fault is 15 seco nds.[...]

2-774 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an set vlan T o group p orts int o a VLAN, set the private VLAN type , map or un map VLA Ns to or f rom an instance , specify a n 802. 1X port to a VLAN , or sec ure a r ange of VLAN s on a Firewall[...]

2-775 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set v lan Defaults The de fault values ar e as follows: • Switche d Ethern et ports and Ether net repe ater por ts are in VLA N 1. • said is 100001 for VLAN 1, 100002 for VLAN 2, 100003 fo r VLAN 3, [...]

2-776 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an If you spe cify a r an ge of V LA Ns, y ou cann ot u se the VLAN name . If you ente r the mistp-instance none co m m a nd , the specified VLANs are unmapped from any instance they are mapped to. [...]

2-777 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set v lan Exam ples Th is example shows how to set VLAN 850 to incl ude ports 3 throu gh 7 on modul e 3: Console> (enable) set vlan 850 3/3-7 VLAN 850 modified. VLAN Mod/Ports ---- -------------------[...]

2-778 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an Relat e d Commands clear co nfi g pvlan clear pvlan mapping clea r vlan set pvlan set spant ree macr eduction set vlan mapping set vl an ver ify -por t-p rovisioning show pvlan show pvlan mapping[...]

2-779 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vlan mapping set vlan mapping T o map 802.1Q VLAN s to ISL VLANs, use the set vlan mapping comman d. set vlan mapping dot1q 1q_vl an_num isl isl_vlan_ num Syntax Descript ion Defaults Thi s command h[...]

2-780 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an mappi ng This e xample sho ws the display if you enter a VLAN that does not e xist: Console> (enable) set vlan mapping dot1q 2 isl 1016 Vlan Mapping Set Warning: Vlan 2 Nonexistent Console>[...]

2-781 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vlan verify-port-provisioning set vlan verify-port-provis ioning T o ena ble o r disab le VLA N po rt -p rovisioni ng verification on al l po rts, use th e set v lan veri fy-port- pr ovision ing comm[...]

2-782 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vmps con fig-fil e set vmps config-file T o set the ba ck up c on fig ur at io n f il e fo r the VLAN Membership Policy Se rve r (VMPS), us e the set vmps conf ig-f ile comman d. set vmps confi g-f ile[...]

2-783 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vmps config-file This exam ple sh ows to disa ble the fe ature th at au to mat ical ly saves the VMPS co nfigurat ion: Console> (enable) set vmps config-file auto-save disable Auto save to store v[...]

2-784 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vmps dow nloa dm et hod set vmps down loadmeth od T o spec ify wh ether to use TFTP or rcp to do wnload th e VMPS da tabas e, use t he set vmps downloadmethod comman d. set vmps downloadmethod { rcp | [...]

2-785 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vmps downl oadserver set vmps downloadserver T o spec ify the IP ad dress of t he TFTP o r rcp server from which the VMPS data base is download ed, use the set vmps downloadserver com mand. set vmps [...]

2-786 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vm ps ser ver set vmps server T o conf igure the VMPS, use the se t vmps s erver comman d. set vmps server ip_ addr [ primary ] set vmps se rver retry count set vmps ser ver r econfirmi nterv al interv[...]

2-787 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vmps server Relat e d Commands clear vmps serv er show vmps[...]

2-788 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vmps state set vmps state T o enable or disable VMPS, use the set vmps state co mman d. set vmps st ate { enable | disable } Syntax D escr i pti on Defaults By defau lt, VMPS is di sabled. Comma nd T y[...]

2-789 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vtp set vtp T o set t he options for VTP , us e the set vtp comm and. set vtp domain dom ain_nam e set vtp mode { client | serv e r | tr anspa rent | off } [ vlan | ms t | unknown ] set vtp passwd pa[...]

2-790 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vt p Command Mode s Pri vile ged. Usage Guid el i nes The following gu ide lines appl y to V TP versi on s 1, 2, an d 3: • VTP suppor ts four di fferent mode s: server, client, tran spare nt , and of[...]

2-791 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vtp • The unknown keyword al lows you to co nfigur e the behavior of the sw it ch da taba ses th at it c an not interpret. (These databases will b e features han dled b y future ex tensions of VTP [...]

2-792 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vt p This example shows ho w to set the VTP password and hide it in the co nfiguration: Console> (enable) set vtp passwd Sa7r12ah hidden Generating the secret associated to the password. The VTP pas[...]

2-793 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vtp pruneeligible set vtp pruneeligib le T o specify which VTP dom ain VLANs are pruning elig ible, use the set vtp pruneeligible com mand. set vtp pruneeligible vlans Syntax Descript ion Defaults Th[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show ac countin g 2-794 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 show accou nting T o di splay ac counti ng setup and c onfigurat ion infor mati on on t he sw itch , us e the show ac counti ng comm and. show accoun ting Syntax Descript ion This c omm [...]

2-795 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ac c oun ting Overall Accounting Traffic: Starts Stops Active Exec 1 0 2 Connect 0 0 1 Command 0 0 0 System 0 0 0 Console> (enable) This e xample shows th e conf iguration details of a switch wit[...]

2-796 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ac coun ting Relat e d Commands set accounting commands set accounting connect set ac countin g exec set accounting suppress set accounting syste m set accounting update[...]

2-797 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show acl log show acllog T o display the status of A CL log ra te limitin g, use the show acllog command . show acllog Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s [...]

2-798 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ac l mac -packet -classify show acl ma c-packe t-cl assify T o displa y a list of VLANs th at hav e the MA C-based A CL feature en abled, use t he show acl mac-pack et-classi fy comm and. show acl mac[...]

2-799 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show a clmerge algo show aclme rge algo T o display informat ion about the A CL merge algorithm, use the show aclmerge algo command . show aclmerge algo Syntax Descript ion This c omm and has n o a rgume[...]

2-800 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show alia s show alias T o di splay a li sti ng of de fined com mand alia ses, use the show alias command . show alias [ name ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Com[...]

2-801 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ar p show arp T o dis pla y the ARP t able , use the show arp comman d. show arp [ ip_addr | hostnam e ] [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T[...]

2-802 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show au the nticati on show authen tication T o display authentica tion informatio n, use the show au thenticat ion co mm and. show authenti catio n Syntax D escr i pti on This c omm and ha s no a rgument [...]

2-803 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show authorization show authorizatio n T o display auth orization setup a nd config uration inform ation on the swit ch, use the sho w author ization comm and. show authorization Syntax Descript ion This[...]

2-804 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show au tos hu t show autoshut T o display the automati c module sh utdo wn conf iguratio n and cu rrent status information , use the show autoshut command . show autoshut Syntax D escr i pti on This c omm[...]

2-805 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show bann er show banne r T o v iew the messa ge of the day ( MOTD), the Ca talyst 650 0 s er ies Switc h Fabr ic Mo dul e L CD bann er, and the st atus of the T el net bann er stored in NVR AM, use the [...]

2-806 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show bo ot show boot T o displa y the conte nts of the BO OT enviro nment vari ables and the config uratio n regis ter settin g, use the show boot command. show boot [ mod ] Syntax D escr i pti on Defaults[...]

2-807 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show boo t device show boot de vice T o display the NAM boot stri ng stored in NVRA M, use the show boot device comm and. show boot de vice mod Syntax Descript ion Defaults Thi s command has no de fa ult[...]

2-808 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m show cam T o display CAM table entr ies, use the show c am command. show cam { dynamic | st atic | p erm a n ent | syst em } [{ mod/port } | vla n ] show cam mac_addr [ vlan ] Syntax D escr i pti[...]

2-809 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sho w ca m 1 00-80-24-1d-d9-ed * 1/2 [ALL] 1 00-80-24-1d-da-01 * 1/2 [ALL] 1 08-00-20-7a-63-01 * 4/1 [ALL] Total Matching CAM Entries Displayed = 7 Console> This exam ple shows how to di spla y dyna m[...]

2-810 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m agi ngtime show cam ag ingti me T o display CAM aging time info rmation for all conf igured VLANs, use the show cam agingtime comm and. show cam agingtime [ vlan ] Syntax D escr i pti on Defaults[...]

2-811 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cam count show cam co unt T o display the number of CAM entries only , use the show cam count comm and. show cam count { dynamic | static | permanent | system } [ vlan ] Syntax Descript ion Defaults[...]

2-812 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m m oni tor show cam monito r T o display the global conf igur ation f or CAM monitor ing or the conf ig uration f or specif ic inter faces, use the show cam monitor comm and. show cam monitor [ mo[...]

2-813 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cam ms fc show cam msfc T o display the router ’ s MA C-VLAN entries, use the show cam msfc comman d. show cam msfc { mod } [ vlan ] Syntax Descript ion Defaults Thi s command has no de fa ult set[...]

2-814 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m not ification show cam notification T o display the status of CAM table notificat ions, notification intervals, and MAC addresses added a nd deleted, use the show ca m noti fication co mman d. sh[...]

2-815 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cam notification This exam ple shows how to displ ay C AM not ification i n forma tion for po rts 1-6 on modu le 2: Console> show cam notification 2/1-6 Mod/Port Added Removed --------- -------- [...]

2-816 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m not ification Relat e d Commands clear ca m clear ca m notif icatio n set cam set ca m notif icatio n set snmp tr ap show cam[...]

2-817 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cd p show cdp T o di splay Cisc o D iscovery Pr otocol (C DP) in forma tion, use th e show cdp comm and. show cdp show cdp ne ighbors [ mod [/ port ]] [ vlan | duplex | capabilities | detail ] show [...]

2-818 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show cd p This example shows how to display detai led CDP neighbor informa tion. Th e display varies dependi ng on yo ur ne twork c onfigurati on at the ti me you r un the c omman d. Console> show cdp n[...]

2-819 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cd p Port Device-ID Port-ID NativeVLAN -------- ------------------------------- ------------------------- ---------- 3/5 002267619 3/6 * 1 3/6 002267619 3/5 1 4/1 002267619 4/2 1 4/2 002267619 4/1 #[...]

2-820 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l show chann el T o d ispl ay E t herCh ann el i nfo rmat ion fo r a ch an nel , u s e t he show channel comman d. show channel [ channel_id ] [ info | statistics | mac ] show channel [ channe[...]

2-821 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show chan nel This exam ple shows how to di splay c ha nnel in forma ti on for a ll c hanne ls: Console> show channel Channel Id Ports ----------- ----------------------------------------------- 768 2[...]

2-822 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l Chan Port if- Oper-group Neighbor Chan Oper-Distribution id Index Oper-group cost Method ---- ----- ----- ---------- ---------- ----- ----------------- 769 1/1 - 1 0 ip both 769 1/2 - 1 0 ip[...]

2-823 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show chan nel Port Rcv-Octet Xmit-Octet -------- -------------------- -------------------- 768 469263 48083 Channel Dely-Exced MTU-Exced In-Discard Lrn-Discrd In-Lost Out-Lost -------- ---------- -------[...]

2-824 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l Console> show channel 769 info protcol Chan Port IP IPX Group id ---- ----- -------- -------- -------- 769 1/1 on auto-on auto-on 769 1/2 on auto-on auto-on Console> Console> show c[...]

2-825 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show c hannel group show chann el group T o disp lay Et herC han nel gr oup sta tus in forma tion, use th e show channel group command. show channel g roup [ admin_gr oup ] [ inf o | statistics ] show ch[...]

2-826 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group This exam ple shows how to displ ay g rou p in for mat ion: Console> show channel group 154 info Admin Port Status Channel Ch Speed Duplex Vlan PortSecurity/ group mode id Dynamic P[...]

2-827 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show c hannel group Admin Port ACL name Protocol group ----- ----- -------------------------------- -------- 154 1/1 ip_acl IP ipx_acl IPX mac_acl MAC 154 1/2 IP IPX MAC Console> Thes e ex amples sho [...]

2-828 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group 769 1/2 2q2t 1q4t untrusted 0 port-based Chan Port ACL name Type id ---- ----- -------------------------------- ---- 769 1/1 IP IPX MAC 769 1/2 IP IPX MAC Console> Relat e d Command[...]

2-829 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show channel h ash show chann el has h T o display the channe l port the traff ic goes to based on the current ch annel distrib ution mode, use the show channel hash command . show channel ha sh channel_[...]

2-830 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch annel ha sh Exam ples This example sho ws how to display hash informatio n in a channel: Console> show channel hash 769 10.6.1.1 10.6.2.3 Selected channel port:1/2 Console> Relat e d Commands[...]

2-831 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show channel m ac show chann el mac T o display MA C information in the chan nel, use the sho w channel mac comm and. show channe l mac Syntax Descript ion This c omm and ha s no a rgume nts o r keywords[...]

2-832 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne lprot oco l show chann elprotocol T o d i s pl a y the channeling pro tocol used by each module in the s ystem, us e t h e show channelpr otocol comm and. show channelpr otocol Syntax D escr i[...]

2-833 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cha nnelproto col Relat e d Commands set channelpr otocol[...]

2-834 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l traffi c show chann el traffic T o display c hannel p ort utilization based on MAC counters, use the show channel traffic command. show channel traffi c [ channel _id ] Syntax D escr i pti o[...]

2-835 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show conf ig show config T o d isplay the nond efaul t sys tem or m odule con figura tion, u se the show config command. show conf ig [ all ] show conf ig [ syst em | mod ] [ all ] show c onfig a cl loca[...]

2-836 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g ! set editing disable ! #frame distribution method set port channel all distribution mac unknown ! #snmp set snmp trap 0.0.0.0 set snmp trap 0.0.0.0 ! #kerberos set kerberos server 0.0.0.0 se[...]

2-837 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show conf ig #rcp set rcp username 1 ! #dns set ip dns server 171.68.10.70 primary set ip dns server 171.68.10.140 set ip dns enable set ip dns domain cisco.com ! #spantree set spantree fwddelay 4 801 se[...]

2-838 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g #module 4 empty ! #module 5 : 48-port 10/100BaseTX (RJ-45) ! #module 6 empty ! set vlan 100 6/1 set spantree portcost 6/1 200 ! #module 7 : 24-port 10/100BaseTX Ethernet set vlan 5 7/5 set vl[...]

2-839 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show conf ig #system set system baud 9600 set system modem disable set system name set system location set system contact ! . . . Console> This example shows ho w to display nond efault syste m config[...]

2-840 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g This e xample sho ws how to display the A CL configur ation f ile location: Console> (enable) show config acl location ACL configuration is being saved in NVRAM. Console> (enable) This [...]

2-841 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show config checkpoints show config checkpoin ts T o display conf iguration checkpoint f ile informatio n, use the show conf ig checkpoints comman d. show conf ig checkpoints Syntax Descript ion This c o[...]

2-842 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g di fference s show config differences T o comp are co nf iguration f iles that ar e stor ed on t h e sy stem to determin e dif ferences between configurati on files or to check if cha nges ha[...]

2-843 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show config differences Relat e d Commands show conf ig[...]

2-844 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g m od e show config mode T o disp lay t he syste m confi gurati on mo de curre ntly runn ing on t he swi tch, use the sho w config mode comm and. show conf ig mode Syntax D escr i pti on This [...]

2-845 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show co n fig q os a cl show config qos acl T o display the co mmitted ac cess lists in a c ommand l ine form at, use th e show conf ig qos acl comm and. show conf ig qos acl { acl _nam e | all } Syntax [...]

2-846 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co ps show cops T o display COPS information, use the show cops comm and. show cops inf o [ diff-se rv | rsvp ] [ noalias ] show cops r oles Syntax D escr i pti on Defaults Thi s command has no de fa [...]

2-847 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow co ps COPS connection state : connected Last active server : 171.21.34.56 Primary configured server : 171.21.34.56 [3288] Secondary configured server : 171.21.34.57 [3288] Console> This exampl e[...]

2-848 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co ps COPS RSVP client state ---------------------- COPS connection state : not-connected TCP connection state : not-connected Last active server : - Primary configured server : - Secondary configured[...]

2-849 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show count ers show counte rs T o d isplay h ardwa re c oun ter s fo r a por t, al l p orts on a m odul e, or a su pe rviso r e ngin e, u se t he show counters com mand. show counters { mod | mo d / port[...]

2-850 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 15 rxTxHCpkts1024to1518Octets = 0 16 rxDropEvents = 0 17 txHCTrunkFrames = 0 18 rxHCTrunkFrames = 0 19 rxHCDropEvents = 0 32 bit counters 0 rxCRCAlignErrors = 0 1 rxUndersizedPkts = 0 2 rxO[...]

2-851 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show count ers Ta b l e 2 - 3 1 describes the possible fields in th e show coun ter s comm and out put. T able 2-31 show c ounters Command O utput Fields Field Des criptio n 64-bit coun ters rxHCT otalP [...]

2-852 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 32-bit coun ters rxCRCA lignEr rors Nu mber of packets rece i ved that had a len gth (excluding fra ming bits, but including FCS octet s) betwe e n 6 4 and 1 518 oct ets, inc lusive, and h [...]

2-853 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show count ers dot3StatsSingle ColFr am es A count of successful ly tra nsmitte d fra mes on a par tic ul ar inte rf ac e for which transmission is inhibited b y exac tly one col lision. A frame that is [...]

2-854 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers Relat e d Commands clear co unters dot3StatsS ymbolErrors F or an inte rface operating at 100 Mb per second, the number o f times there wa s an in valid data symbol when a v alid carrier wa[...]

2-855 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show crypto key show crypt o key T o display RSA key pa ir information, use the sho w crypto k ey command. show crypto ke y Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults T[...]

2-856 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show de fau lt show defaul t T o che c k the stat us of the d efault po rt s ta tus sett ing, u se the show default command. show default Syntax D escr i pti on This c omm and has n o keywords or a rgument[...]

2-857 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dhcp -snooping b indings show dhcp-snoo ping bindi ngs T o display DHCP binding s learned fro m DHCP snooping , use the s how dhcp-snooping bindings comm an d. show dhcp-snooping bindings [ ip_addr [...]

2-858 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show dh cp-s noopi ng bi ndings Relat e d Commands clear dhcp-snooping bindings set port dhcp-snooping[...]

2-859 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dhcp-s nooping con fig show dhcp-snoo ping confi g T o di splay t he DHCP sno oping configu ratio n, use the show dhcp-snooping config comm and. show dhcp-snooping conf ig Syntax Descript ion This c[...]

2-860 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show dh cp-s noopi ng s tatistic s show dhcp-snoo ping statistic s T o display DHCP snooping statistics, use the show dhcp-snooping statisti cs comm and. show dhcp-snooping statistics Syntax D escr i pti o[...]

2-861 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dot1 q-all- tagged show dot1q-all-tagg ed T o display the status of the dot1q taggi ng featu re on the switch, use the show dot1q-all-tagged comm and. show dot1q-all-tagged Syntax Descript ion This [...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show dot1 x 2-862 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 show dot1x T o display sy stem 80 2.1X c apabilities a nd info rmation re lated to 8 02.1X u sers, groups , VLANs, and VLAN g rou ps, use t h e show dot1x command. show dot1x show dot1x gr oup [...]

2-863 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dot1x radius-vlan-assignment enabled radius-keepalive state enabled re-authperiod 7200 seconds server-timeout 30 seconds shutdown-timeout 300 seconds supp-timeout 30 seconds tx-period 30 seconds Con[...]

2-864 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show do t1 x User mNo = 3 User pNo = 18 Username = user81 User IP = 81.81.81.55 User VLAN = 81 --------------------------------- Info of Group group-82 User Count = 1 --------------------------------- User[...]

2-865 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dot1x This e x ample sho ws how to disp lay inform ation abou t a specif ic authe nticated user: Console> show dot1x user user81 Dot1x Info for user user81 ---------------------------------------[...]

2-866 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show dv la n statis ti cs show dvlan statistics T o display dynamic VLAN statistic s, use the show dvlan statistics co mmand. show dvlan statistics Syntax D escr i pti on This c omm and has n o keywords or[...]

2-867 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show enviro nment show environme nt T o display en vironmental, te mperat ure, an d inline po wer status informa tion, use the show en vironment comm and. show environment [ all | temperatu re | power [ [...]

2-868 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent Exam ples Th is exampl e sh ows how to displa y environmen tal st atus in forma ti on: Console> show environment Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present[...]

2-869 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show enviro nment This exa mple shows ho w to display temperature informa tion: Console> show environment temperature Intake Exhaust Device 1 Device 2 Slot Temperature Temperature Temperature Temperat[...]

2-870 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent This example shows ho w to display the in line power status for a spe cific module: Console> show environment power 9 Module 9: Default Inline Power allocation per port: 9.500 Watts ([...]

2-871 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show enviro nment This e xample shows h ow to display co nnector rating informa tion: Console> show environment connector Chassis connector rating : 756.00 Watts (18.00 Amps @42V) Slot connector ratin[...]

2-872 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent Relat e d Commands set inlinepowe r show port inlinepo wer Slot power Require ment/U sage Power Requested Module power requested. Power Allocat ed Mo dule power alloca tion. Card St atus[...]

2-873 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show errdi sable-t im eout show errdisab le-timeo ut T o displ ay the configurat ion and stat us of the errd isable tim eout, use the show errd isable-timeout comm and. show e rrdisable-time out Syntax D[...]

2-874 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show err dis ab le-timeou t Relat e d Commands set errdis able-time out[...]

2-875 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show er rordetect ion show errord etection T o display error detectio n settings, u se the show errord etec ti on command. sho w err ordetec tion Syntax Descript ion This c omm and ha s no a rgume nts o [...]

2-876 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l show fabri c channel T o display Switch Fab ric Module inform ation, use the show fabric channel command. show fa bric channel counter s { mod | all } [ hex ] show fa bric channel ut [...]

2-877 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show f abric channel The CEF256/ CEF72 0 modules op erate in one of three mode s when using central ized forwar ding: • Compact mode—Opera tional mode when all modules in the system ar e CEF256 or CE[...]

2-878 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l This exam ple sh ows how to displ ay sw itch m ode a nd fab ri c c hanne l sta tus: Console> show fabric channel switchmode Global switching mode: flow through Module Num Fab Chan [...]

2-879 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show f abric channel 6 18 11, 11 n/a unused 6 18 12, 12 n/a unused 6 18 13, 13 n/a unused 6 18 14, 14 n/a unused 6 18 15, 15 n/a unused 6 18 16, 16 n/a unused 6 18 17, 17 n/a unused 7 0 n/a n/a n/a 8 1 0[...]

2-880 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l Relat e d Commands switch fabric Speed Speed of th e fa bric link (8 G bp s or 20 G b ps). Input Percentag es of input traf f ic utilizatio n. Output Percentages of outpu t traff ic u[...]

2-881 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fabric errors show fabri c errors T o d isplay th e fabric err or coun ter s on o ne or al l mo dule s, use the show fabric errors comman d. show fabric err o rs { mod | all } Syntax Descript ion De[...]

2-882 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c errors Relat e d Commands show fa bric channel show fabric status[...]

2-883 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fabri c status show fabri c status T o di splay the in tegrate d switc h fabric sta tus an d f orward ing speed , use the s how f abric status comm and. Syntax Descript ion This c omm and ha s no ke[...]

2-884 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show file show file T o display the conte nts of a file that hav e b een sav ed to Flash memory , use the show f ile command . show f ile [ device : ] fil en ame [ dump ] Syntax D escr i pti on Defaults Th[...]

2-885 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fir ewall show firewall T o displa y the parame ters that ar e conf igured for a Fire wall Serv ices Modul e (FWSM), us e the show fi re w al l command. show f irewal l multiple-vlan-i nterfaces Syn[...]

2-886 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show flas h show flash T o list bootfl ash or Fl ash PC c ard in formatio n, inc luding file c ode nam es, version nu mber s, volume ID, status , and si z es , us e t he show flash command. show flash de v[...]

2-887 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fla sh Console> show flash chips ******** Intel Series 2+ Status/Register Dump ******** ATTRIBUTE MEMORY REGISTERS: Config Option Reg (4000): 2 Config Status Reg (4002): 0 Card Status Reg (4100):[...]

2-888 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show flas h USAGE INFO: Bytes Used = 201D9B Bytes Available = 5FE265 Bad Sectors = 0 Spared Sectors = 0 OK Files = 1 Bytes = 100FC0 Deleted Files = 1 Bytes = 100DDB Files w/Errors = 0 Bytes = 0 ******** In[...]

2-889 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ftp show ftp T o di spla y th e param eters con fi gured for File T ransfer Pro tocol (FTP ), u se the show ftp command . show ftp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords[...]

2-890 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ga rp ti m er show garp timer T o display all the valu es of the General At tribute Reg istration Pro tocol (GARP) tim ers, use the sho w garp timer comm and. show garp timer Syntax D escr i pti on Th[...]

2-891 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ga rp tim e r Relat e d Commands set garp timer set gm rp ti me r set gvrp timer[...]

2-892 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gmr p configura tion show gmrp conf iguration T o display complete GMRP-rel ated configu ration informat ion, use th e show gmrp conf iguration comm an d. show gmrp confi guration Syntax D escr i pti [...]

2-893 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show gmr p statist ics show gmrp statistics T o display all the GMR P-relate d statistics for a specifie d VLAN, use the show gmrp statistics comm an d. show gmrp statistics [ vlan ] Syntax Descript ion [...]

2-894 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gmr p timer show gm rp timer T o display all the values of the GMRP timers, use the show gmrp timer co mman d. show gmrp timer Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords. D[...]

2-895 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show gvr p co nfi gur a tio n show gvrp c onfigura tion T o disp lay GVRP c onfigurati on inform ation, in clud ing timer values, wheth er or not GVRP a nd dynami c VLAN c re atio n i s enab le d, a nd w[...]

2-896 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp co nfigu rat ion Disabled Fixed Normal 4/2 Disabled Fixed Active 4/7 Disbled Forbidden Normal 4/3 Disbled Forbidden Active 4/6 GVRP Participants running on no ports. Console> Relat e d Command[...]

2-897 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show gvrp stat istics show gvrp statistics T o vie w GVRP statistics for a port, use the show gvrp sta tisti cs command. show gvrp statistics [ mod/port ] Syntax Descript ion Defaults The default is, tha[...]

2-898 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp s tatistic s Relat e d Commands clear g vrp st ati st i cs set gvrp set gvrp dy namic- vlan- creation set gvrp registration set gvrp timer show gvrp c onfiguration MAC-Based General Qu erie s rec[...]

2-899 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ifindex show ifindex T o display the informatio n of the specif ic if Index, use the show if index command. show i findex number Syntax Descript ion Defaults Thi s command has no de fa ult set tings[...]

2-900 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p fl oo ding show igmp fl ooding T o d ispl ay w he the r t he IGM P f l oodin g f eat ure i s e nabl ed o r disab l ed, us e t he show i gmp fl ooding comm and. Syntax D escr i pti on This c omm [...]

2-901 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show igmp gd a_status show igmp g da_status T o display the acti ve multic ast groups tha t are included in a Group Destination Address (GD A) in a partic ular VLAN for wh ich there is a Layer 2 CAM entr[...]

2-902 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p le ave-q uery -type show igmp le ave-query-type T o d ispl ay t he ty pe of q ue ry to b e sent whe n a po rt r ece ives a leave mess ag e, us e t he show igmp lea ve-query-type comman d. Syntax[...]

2-903 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ig mp m ode show igmp mode T o display the IGMP mode on the switch, use the show i gmp mode comman d. show i gmp mode Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi [...]

2-904 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p qu erier info rmatio n show igmp querier information T o disp lay queri er inf ormatio n specific to a c onfigured V LAN, us e the show igmp queri er inf ormation comm and. show ig m p q u eri e[...]

2-905 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow ig mp st a t is ti c s show igmp statistics T o vie w IGMP statistics f or a partic ular VLAN, use the show igmp statistics comman d. show igmp statistics [ vlan_id ] Syntax Descript ion Defaults T[...]

2-906 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p s tatistics Relat e d Commands clear ig mp statist ics clear multi c ast rout er set igmp set multicast router show multicast group show multicast r outer MAC-Based General Qu erie s recv d Numb[...]

2-907 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show imagemib show imagemib T o display i mage infor mation pr ov ided in th e CISCO-IM A GE -MIB for a particu lar imag e, us e the show imagemib command. show imagemib filen ame Syntax Descript ion Def[...]

2-908 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show im age-ve rificat ion show image-verification T o displa y the status of the image ve rifica tion featur e, use the sh ow i mage- verif cation co mmand. sho w imag e-ve rif ication Syntax D escr i pti[...]

2-909 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show inlinepower show inlinep ower T o display status of inline power for all modules, use the show in l in e pow e r comman d. sh ow i nl in e pow e r Syntax Descript ion This c omm and ha s no a rgume [...]

2-910 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show inli nep ower Relat e d Commands set inlinepowe r set po rt i nl in epow er show port inlinepo wer Inline Po wer Admin T otal powe r that is allocated to the ports on the module. Usage Status Status o[...]

2-911 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show interface show interface T o display information on ne twork interf aces, use the show interface command . show interface Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Default[...]

2-912 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show inte rfa ce Relat e d Commands set interface dest IP address of the host to which the console por t will be conn ected. sc0 Information on the sc0 in-ban d interface . vlan Number of the VLAN to which[...]

2-913 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show inventory show invento ry T o display the product in ventory listin g of al l Cisco product s that ar e installed in a netw o rking devi ce, use the show i nven t o r y command. show in ventory [ en[...]

2-914 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show in ve ntory PID: WS-C6000-VTT , VID: , SN: SMT03461008 NAME: "2", DESCR: "1000BaseX Supervisor 2 port WS-X6K-SUP2-2GE Rev. 1.1" PID: WS-X6K-SUP2-2GE , VID: , SN: SAD04450LF1 NAME: [...]

2-915 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip alias show ip alias T o s how a listi ng of de fined IP ali ases, use the show ip alias comm and. show ip alias [ name ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Com[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show ip dn s 2-916 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 show ip dns T o s how the DNS name server s and the de fault D NS dom ain nam e, us e t he show ip dns command. show i p dns Syntax Descript ion This c omm and ha s no a rgume nts o r keywords[...]

2-917 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip d ns Relat e d Commands clear ip dns domain clear ip dns serv er set ip dns set ip dns domain set ip dns server[...]

2-918 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ip htt p show ip http T o vie w the HTTP conf iguration and the switch web interf ace information, use the show ip http comm and. show ip http Syntax D escr i pti on This c omm and ha s no a rgument s[...]

2-919 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip http This e xample sho ws the HTTP conf iguration and web interface in formation if the web in terface is not supported: Console> show ip http HTTP Configuration Information: ---------------- [...]

2-920 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ip perm i t show ip permit T o display the IP permit list information , use the show ip pe rmit command. show ip permit [ noalias ] Syntax D escr i pti on Defaults This co mmand has no de fa ult v alu[...]

2-921 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip permit Relat e d Commands clear ip permit set ip permit set snmp tr ap Last Accessed T ime Date and time of the last attempt to log in to the switch from the address. T ype Login-attempt type . T[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show ip r oute 2-922 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2s2 show ip route T o display IP routing table entries, use the show ip route command. show ip r oute [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma n[...]

2-923 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip r out e Relat e d Commands clear ip r oute set ip route[...]

2-924 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ke rber os show ke rbero s T o display the K erberos confi g uration in formation, use the show kerberos com mand. sho w kerber os [ cr eds ] Syntax D escr i pti on Defaults Thi s command has no de fa[...]

2-925 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show kerberos Relat e d Commands clear ke rberos clients mandat ory clear ke rber os cr edential s fo rward clea r k er beros rea lm clear ke rbero s serv er clear ke y conf ig-key set kerber os clients [...]

2-926 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show l2pr otocol-t unnel sta ti st ic s show l2pro tocol -tunnel sta tistics T o di splay Lay er 2 pr otoc ol tu nneli ng stati sti cs for a por t or ra nge or po rts, use th e show l2protocol-tunnel stati[...]

2-927 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l2 protoco l-tunne l stati stics This exam ple shows how to displ ay L ayer 2 pr otoc ol tunne ling stat ist ics for a port: Console> show l2protocol-tunnel statistics 7/1 Tunneling CoS is set to[...]

2-928 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel show lacp-cha nnel T o di splay inf or matio n abo ut the Li nk Aggr egation Contr ol Pr otoc ol ( LACP) channe l, use the show lacp-channel comman d. show l acp-channel show lacp-channe[...]

2-929 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l acp-chan nel Command Mode s Normal. Usage Guid el i nes If you do not speci fy the admi n-key v alue, infor mation about all LA CP channels is di splayed. If you do not speci fy the channel_id v a[...]

2-930 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel This example shows how to display L A CP Tx and Rx sta tistics for por ts that are assign ed to administ rative k ey 152: Console> show lacp-channel group 152 statistics Port Admin LA[...]

2-931 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l acp-chan nel This example shows how to display the outgo ing port for th e specified source and destination IP addresses: Console> (enable) show lacp-channel hash 808 172.20.32.10 172.20.32.66 [...]

2-932 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lcper roracti on show lcperroract ion T o di splay ho w yo ur syst em handl es LCP e rrors wh en a modul e repo rts an ASI C probl em to the Netwo rk Managem ent Proce ssor (NM P), us e t he show lcpe[...]

2-933 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show lda show lda T o displa y the ASLB con figurati on inform ation , use the show ld a command . show lda [ committed | uncommitted ] show lda mls entry show lda mls entry [ de st ina ti on ip_addr_s p[...]

2-934 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) . Ente rin g[...]

2-935 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show lda LD Server Side: --------------- Server(s) and LD are on VLAN 105 LD is connected to switch port 4/40 on VLAN 105 Console> (enable) This exam ple sh ows how to displa y u ncomm itte d AS LB i [...]

2-936 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lda This exa mple shows ho w to display all ASLB MLS entry statistics: Console> (enable) show lda mls statistics entry Last Used Destination IP Source IP Prot DstPrt SrcPrt Stat-Pkts Stat-Bytes ---[...]

2-937 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show localuser show localu ser T o display the local user ac counts for a switch, use the show loca luser comma nd. show localuser [ name ] Syntax Descript ion Defaults Thi s command has no de fa ult set[...]

2-938 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show log show log T o display the error log for the system or a specif ic module, use the show log comm and. show log [ mod ] show log dump [ - count ] Syntax D escr i pti on Defaults Thi s command has no [...]

2-939 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show log NVRAM log: 01. 1/25/2000,17:39:10: convertCiscoMIB:PreSac(0) checksum failed: 0xFFFF(0xE507 ) Module 3 Log: Reset Count: 14 Reset History: Wed Mar 22 2000, 10:35:54 Fri Mar 17 2000, 15:36:57 Wed[...]

2-940 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show log Relat e d Commands clear lo g[...]

2-941 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show log command show log comman d T o dis play the command log entries, u s e th e show log co mmand command. show log command [ mod ] Syntax Descript ion Defaults Thi s command has no de fa ult set tin[...]

2-942 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng show loggin g T o display the system m essage log info rma tion, u se the show logging command . show logging [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set ti[...]

2-943 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l ogging qos 7 7 radius 7 7 rsvp 7 7 security 7 7 snmp 7 7 spantree 7 7 sys 7 7 tac 7 7 tcp 7 7 telnet 7 7 tftp 7 7 udld 7 7 vmps 7 7 vtp 7 7 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warning[...]

2-944 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng buffer show loggin g buffer T o display sy stem m essages fro m the internal buf fer , use the show log ging buffer co mmand. show logging buffer [ – ] [ number_of _mes sages ] Syntax D esc[...]

2-945 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging callhome show loggin g callhome T o display the conf igured CallHo me settings, use the sho w logging callhome command. show logging callhome Syntax Descript ion This c omm and ha s no a rgu[...]

2-946 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng callho me Relat e d Commands clear lo gging callhome clear logging callhome from clear logging c a llhome repl y-to show logging callhome se verity clear logg ing ca llho me sm tp-s erver set[...]

2-947 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging callhome destination show loggin g callhome destination T o display the add resses set to re ceiv e CallHome sy slog message s, use the show logging callhome destination com mand. show loggi[...]

2-948 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lo ggi ng callho me de st ination Relat e d Commands clear lo gging callhome set logging callhome set logging callhome destina tion set logging callhome fr om set logging callhome r eply-to set loggin[...]

2-949 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging c allhome from show loggin g callhome from T o display the From address in the CallHome syslog messages, use the show loggi ng cal lhome from comm and. show logging callhome fr om Syntax Des[...]

2-950 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng callho me reply -t o show loggin g callhome repl y-to T o display th e Reply-to addre ss in the Cal lHome syslog messag es, use the show logging callhome reply-to command. show logging callho[...]

2-951 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging callhome severity show loggin g callhome severity T o display the severity le vel at which point syslog messages a re sent to specified destination addresses, use the show logging callhome s[...]

2-952 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lo ggi ng call ho me sm tp-ser ve r show loggin g callhome smtp-server T o display the SMTP serv ers set for CallHome to use when routing messa ges, use the show logging callh ome s mtp- server co mma[...]

2-953 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ma c show mac T o display MA C counters, use the show mac comman d. show mac [ utilization ] [ mod [/ port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T ypes S[...]

2-954 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mac MAC SMT-Address Curr-Path TReq TNeg TMax TVX ------- ----------------- ---------- -------- -------- -------- -------- 3/4 00:06:7c:b3:bc:98 primary 165000 165000 165004 2509 00-60-3e-cd-3d-19 MAC [...]

2-955 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ma c In-Dis ca rd Incoming frame s that w ere disc arde d b eca use t he f rame d id n ot n ee d t o b e switc hed. Out-D iscard Number of outbou nd pa ckets chos en t o be disca rded even though no[...]

2-956 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mi croc ode show microcode T o display the version of the microcode and the modu le version infor mation, use the show m icroco de comm and. sho w micr ocode Syntax D escr i pti on This c omm and ha s[...]

2-957 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls show mls T o display MLS Layer 3 pack et informa tion in t he MLS-based Catalyst 6500 series swi tches, use th e show mls com mand. show mls Syntax Descript ion This c omm and ha s no keywords o[...]

2-958 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s MSFC ID Module XTAG MAC Vlans --------------- ------ ---- ----------------- -------------------- 52.0.0.3 16 1 00-10-29-8a-0c-00 1,10 Console> This e xample sho ws the display if you enter the[...]

2-959 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls acl-route show mls acl-route T o display summari es from A CL for r outing in the M LS-based Catalyst 6500 series sw itches, use the show mls acl-r oute command. show mls acl-r oute Syntax Descr[...]

2-960 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s cef ex act -route show mls cef exact -route To show the exact path that is tak en from a specific IP source addres s to a specific IP destination add ress, use the show mls cef exact-route comm a[...]

2-961 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls cef interface show mls cef interface T o display MSFC VLAN information, use the sh ow mls cef i nterf ace command. show mls cef inte rface [ vlan ] Syntax Descript ion Defaults Thi s command has[...]

2-962 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s c e f in te rfa ce This e x ample sho w how to disp lay info rmation fo r a specif ic CEF VLAN: Console> (enable) show mls cef interface 46 Module 16: vlan 46, IP Address 46.0.0.99, Netmask 25[...]

2-963 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show m l s ce f ma c show mls cef mac T o displ ay bott om inter face adap ter (BIA ) physical M A Cs an d HSR P active virtual MACs associated with the d esign ate d MSFC 2, use th e show mls c ef mac c[...]

2-964 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls cef maximum-routes show mls cef maximum-routes T o dis play t he maxim um num ber of rou tes that are c onfigured fo r eac h MLS pr otocol, use the show mls ce f ma ximum- ro ute s command . show [...]

2-965 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls cef rpf show mls cef rpf T o disp lay reverse path f orwarding (RPF) mo de info rmati on, stat istics, and VLA N tabl e conte nt, use the show mls cef rpf command. show mls cef rpf { mode | stat[...]

2-966 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s cef rpf Relat e d Commands clear mls cef rp f stati stics[...]

2-967 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls cef summary show mls cef summary T o display a summary of CEF table information , use the show mls cef summary comman d. show mls cef summary Syntax Descript ion This c omm and ha s no a rgume n[...]

2-968 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls cef summary Relat e d Commands clear mls cef sho w mls cef interfa ce show mls cef mac sho w mls entry cef IPX r out e e ntri es N umbe r of IP X ro ut e en t ries. IP load shar ing entries Number[...]

2-969 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entry show mls entry T o display state informatio n in the M LS-based Catalyst 6500 series switch es, use th e show mls entry comm and. show mls entry [ mod ] [ short | long ] show mls entry ip [...]

2-970 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry Usage Guid el i nes On swit che s configured wi th the Supe r visor En gine 2 wit h La ye r 3 Sw it chin g Engi ne II ( PFC2), th e display co ntai ns summa rie s d erived from t hree fo rw[...]

2-971 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entry The show mls entry com mand disp lays bridge d flows on a Supervisor En gine 1 when bridg ed flow statistics is enabled. T he show mls statistics ent ry c omma nd displa ys bridg ed f lows[...]

2-972 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry For destinati on-only flow: Console> (enable) show mls entry ip short Destination-IP Source-IP Prot DstPrt Src Prt Destination-Mac Vlan --------------- --------------- ----- ------ -----[...]

2-973 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entry 401.0000.0000.0401 - 00-00-04-01-00-00 401 3/1 4633 38676 Total entries: 4 Console> (enable) Console> (enable) show mls entry ipx 16 short Destination-IPX Source-IPX-net Destination-[...]

2-974 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry 0.0.0.2 0.0.0.2 2 201 101 cc-cc-cc-cc-cc-cc 2 ARPA 0 0 01:03:21 01:00:51 cccccccc cccccccc 0.0.0.4 0.0.0.4 4 203 X cc-cc-cc-cc-cc-cc 4 ARPA 0 0 01:03:19 01:00:51 cccccccc cccccccc 0.0.0.1 0[...]

2-975 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entr y cef show mls entry cef T o display CEF and adjacenc y entries (and Tx statistics) for IP resolved entries an d IPX resolved or connect ed entries, us e the show mls entry cef comm and. sh[...]

2-976 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef Exam ples This example sho ws how to display information for all CEF entries: Console> (enable) show mls entry cef Mod FIB-Type Destination-IP Destination-Mask NextHop-IP Weight --- [...]

2-977 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entr y cef This exam ple sh ows how to displa y adj ace ncy infor mat ion: Console> (enable) show mls entry cef ip adjacency Mod: 16 Destination-IP: 127.0.0.21 Destination-Mask: 255.255.255.2[...]

2-978 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef Relat e d Commands clear mls cef clear mls entry cef sho w mls cef interfa ce show mls cef mac show mls cef summary Encp Next-hop destin ation e ncap sulat ion typ e (ARP A, RA W , SAP [...]

2-979 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls e ntry netflow-route show mls entry netflow-route T o display shortcut informatio n in the MLS-based Catalyst 6500 series switches, use the show mls entry netflow-r oute comman d. show mls entry[...]

2-980 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry net flow-ro ut e Ente rin g th e destination ke yword speci fies the en tries matc hing the destination IP address specif ication, ent erin g th e source ke yword specifie s the entries mat[...]

2-981 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls exclud e protocol show mls exclude protocol T o displa y excluded pr otocols on T CP or UDP f rom being sho rtcuts, u se the show mls exclud e prot ocol comm and. show ml s exclude pr otocol Syn[...]

2-982 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast show mls multicast T o display IP multicast MLS inform ation, use the show mls multicast comm and. show ml s multicast show mls multicast entry {[ mod ] [ vlan vlan_id ] [ grou p ip_add[...]

2-983 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls multicast If you disab le DNS, no name c an be specified or shown. A warning message is displayed if you disable the La yer 2 m ulticast protoc ol when the multicast multilaye r switching (MMLS)[...]

2-984 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast This e xample shows h ow to display statistical informa tion on a switch conf igured with the Sup ervis or Engin e 1 with Layer 3 S witc hing Engi ne (WS- F6K- PFC): Console> (enable[...]

2-985 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls multicast This example shows ho w to display IP MM LS entry in formati on on a switch c onfigured with th e Supervis or En gi ne 1 wi th L ayer 3 Swit ching E ng ine WS-F 6K-PFC: Console> (en[...]

2-986 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s nde show mls nde T o display NetFlo w Data Export information, u se the show mls nde comm and. show ml s nde Syntax D escr i pti on This c omm and has n o a rgument s. Defaults Thi s command has [...]

2-987 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls netflow-route show mls netflow-route T o display summar ies from NetFlo w for routing in the MLS-based Catalyst 6500 series switch es, use the show mls netflow -route command . show mls netflow [...]

2-988 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls pb r-route show mls pbr-route T o display statistics about polic y-based routing (PBR) traff ic, use the show mls pbr - route command. Syntax D escr i pti on This c omm and has n o keywords or a r[...]

2-989 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls stati stics show mls statistics T o display MLS statistics info rmation in the MLS-based Cata lyst 6500 seri es switches, use the show mls statistics command. show mls statistics pr otocol show [...]

2-990 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Usage Guid el i nes If your syst em is c onfigure d wit h the Sup ervis or E ngine 2 wi th Swi tc hing En gine II (PFC2) , t he show mls statistics ent ry comma nd output displays pe[...]

2-991 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls stati stics Ente r th e show mls stat istics entry ip t op-talkers command to ide ntify the NetFlo ws with the maxim um network usa ge (ca lle d “top ta lkers”). T he co mm and ou tput displ[...]

2-992 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Note Th e foll owing command s are ou tput fr om switc hes configu red wit h the Sup ervisor Engin e 1 with Lay er 3 Switchi ng Eng in e WS-F6 K-PFC. The out put from sw itche s conf[...]

2-993 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls stati stics Relat e d Commands clear mls statistics entry set mls bridg ed- flow-s tat istics set mls sta tistics protocol show mls entry[...]

2-994 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s verify show mls verify T o disp lay th e Layer 3 er ror chec king conf igu ratio n, use the show mls ve rify comman d. show mls verify Syntax D escr i pti on This c omm and ha s no a rgument s o [...]

2-995 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mo dule show module T o disp lay modu l e status a nd i n forma t ion, use the show module co mma nd. For supe rvis or e ngi ne s, the show module command di splays the supe rvisor en gine numb er b[...]

2-996 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule Mod MAC-Address(es) Hw Fw Sw --- -------------------------------------- ------ ---------- -------------- 1 00-30-80-f7-a5-06 to 00-30-80-f7-a5-07 1.0 5.2(1) 6.1(0.12) 00-30-80-f7-a5-04 to 00-3[...]

2-997 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mo dule This exam ple sh ows the dis play f or a sup er visor e ngine 720: Console> show module 6 Mod Slot Ports Module-Type Model Sub Status --- ---- ----- ------------------------- ------------[...]

2-998 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule init show moduleinit T o d ispl ay c onte nts of the i nform ation stor e d in the sy stem m odule i n itiatio n lo g, use the show moduleinit co mmand. show moduleinit [ mod ] [ log lognum | [...]

2-999 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show moduleinit This exam ple sh ows how to displa y the co nten ts of a sp eci fic log f or m odule 1 : Console> show moduleinit 1 log 2 Module 1: Number of Logs: 3 Log #2: State 1: Entry/Exit/Elapse[...]

2-1000 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ms fca utostat e show msfcautosta te T o display the Multilayer Switc h Feature Card (MSFC) auto port state, use the show msfcautosta te comm and. show msfcauto state Syntax D escr i pti on This c om[...]

2-1001 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show msmaut ostate show msmautosta te T o display t he current status of the li n e protocol st ate determi nation of the MSMs due to Catalyst 6500 series switc h port sta te ch ange s, use the show msm[...]

2-1002 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mult icast gr oup show multi cast group T o display the multicast group conf iguration , use the show multicast group comm and. show multicast group [ mac_addr ] [ vlan _id ] Syntax D escr i pti on D[...]

2-1003 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show multicast group Relat e d Commands clear multi c ast rout er set multicast router show multicast r outer CoS CoS v alu e. Destination Ports or VCs List of al l the ports that bel o ng to th is mult[...]

2-1004 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mul ti ca st grou p cou nt show multi cast group coun t T o show the total count of multicast addresses (g roups) in a VLAN, use th e s how multicast group c ount comm and. show multicast gr oup coun[...]

2-1005 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show multicast protocols status show multicast protocols status T o display the status of Layer 2 multicast pro tocol s on the switch, use the sho w multic ast pr otocol s status comma nd. sho w multi c[...]

2-1006 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mult icast ra telimit- info show multicast ratelimit-info T o display information ab out multicast rate limiting, use the show multica st ratelimi t-inf o comman d. show multi cast ra telimit -info S[...]

2-1007 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mu lticast rou ter show multicast router T o displa y the port s that have IGMP or RGMP -cap able rou ters assigne d to them, use the show multicast rou t er command. show multicast r outer { igmp [...]

2-1008 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mul ti ca st router Ta b l e 2 - 6 0 descr ibes the f iel ds in the show multicast r outer command output . Relat e d Commands set igmp set multicast router set rgmp show multicast group show multica[...]

2-1009 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show multicast v3-group show multicast v3-group T o di splay IGM P version 3 in for mati on ba sed on grou p I P a ddre ss, use t he show mu lti cast v3 -gro up comm and. show multicast v3-group [ vlan_[...]

2-1010 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat show netstat T o display the current ly activ e network connections an d to list statistics for the v arious protocols in the TCP/IP , use the show netstat comm and. sho w netsta t [ tcp | [...]

2-1011 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show net stat 69 duplicate acks 0 acks for unsent data 3468 packets (15367 bytes) received in-sequence 12 completely duplicate packets (20 bytes) 0 packets with some dup. data (0 bytes duped) 4 out-of-o[...]

2-1012 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This exam ple sh ows how to displ ay U DP st at istic s: Console> show netstat udp udp: 0 incomplete headers 0 bad data length fields 0 bad checksums 0 socket overflows 1116 no such port[...]

2-1013 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show net stat Ta b l e 2 - 6 2 descri bes the f iel ds in the show netstat udp command o u tpu t. This example shows how to displa y IP sta tistics: Console> show netstat ip ip: 76894 total packets r[...]

2-1014 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This example shows how to displa y ICMP statistics: Console> show netstat icmp icmp: Redirect enabled 0 calls to icmp_error 0 errors not generated 'cuz old message was icmp Output h[...]

2-1015 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show net stat This exam ple sh ows how to displa y the IP r out ing ta ble: Console> show netstat routes DESTINATION GATEWAY FLAGS USE INTERFACE default 172.16.1.201 UG 6186 sc0 172.16.0.0 172.16.25.[...]

2-1016 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat Ta b l e 2 - 6 6 descr ibes the f iel ds in the show ne tstat in terfac e command out put. Relat e d Commands set interface set ip route T able 2-66 sho w netstat int erfac e Command O utpu[...]

2-1017 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ntp show ntp T o displa y the curren t NTP status, us e the show ntp command . show ntp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de fa ult [...]

2-1018 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ntp Relat e d Commands clear ntp ser ver set ntp broadcastclie nt set ntp broadcastdelay set ntp client set ntp serv er[...]

2-1019 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf show pbf T o display PBF-related information , use the show pbf comman d. show pbf [{ adjace ncy | statist ics | map } [ adj_na me ]] Syntax Descript ion Defaults Thi s command has no de fa ult[...]

2-1020 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f This exam ple sh ows how to displ ay a dja cency in forma ti on for a dja cency a _1 : Console> show pbf adj a_1 Index DstVlan DstMac SrcMac Name ---------------------------------------------[...]

2-1021 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf Relat e d Commands clear pbf set pbf[...]

2-1022 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f arp-insp ectio n show pbf arp-in spection T o ve rify that an ARP-inspection A CE is set on the A CL for a clie nt list or a gate way , use the show pbf arp-inspection comman d. show pbf arp-ins[...]

2-1023 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf cli ent show pbf client T o display the PBF client conf iguration, use th e show pbf client command: show pbf client [ client _name | ip _addr ] Syntax Descript ion Defaults Thi s command has n[...]

2-1024 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f gw show pbf gw T o display the PBF gate way confi guration, use the show pbf gw command. show pbf gw [ gw_name | ip_add r ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tin[...]

2-1025 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf-map show pbf-map T o display PBF map information, use the show pbf- map co mmand . show pbf-map { vla n | config } Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma n[...]

2-1026 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f-ma p Relat e d Commands clear pbf cli ent clear pbf gw clear pbf- map set pbf client set pbf gw set pbf -ma p[...]

2-1027 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pol l show poll T o display system polling information, use the show poll comma nd. show poll Syntax Descript ion This c omm and ha s no a rgume nts o r keywords. Defaults Thi s command has no de f[...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show por t 2-1028 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 show port T o disp lay po rt st atus informa tion, use the show port comman d. show port [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Comma nd T ypes[...]

2-1029 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port Exam ples Th is example shows how to display the status an d counte rs for a speci fic module and por t: Console> show port 2/1 * = Configured MAC Address Port Name Status Vlan Duplex Speed[...]

2-1030 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex ----- -------- --------- ------------- -------- -------- -------- ------- 9/5 disabled shutdown 0 0 1 disabled 126 Port Num-[...]

2-1031 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port 7/8 enable 00-10-7b-00-0a-5f (Port host processor not online) Port Call-Manager(s) DHCP-Server TFTP-Sever Gateway -------- ----------------- --------------- --------------- --------------- 7/1[...]

2-1032 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt 3/8 onhook 1 full 64k FXS 3/9 onhook 1 full 64k FXS 3/10 onhook 1 full 64k FXS 3/11 onhook 1 full 64k FXS 3/12 onhook 1 full 64k FXS 3/13 onhook 1 full 64k FXS 3/14 onhook 1 full 64k FXS 3/15 o[...]

2-1033 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port Ta b l e 2 - 6 8 describe s the possib le fields (de pending on the p ort type q ueried ) in the show port co mman d output. T able 2-68 sho w por t Command O utput Fields Field Description Po[...]

2-1034 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Unde rSize Number of received frames l ess than 64 oc tets long (but are othe rwise wel l-form ed). Single-Coll Number of time s one collision o ccurred before t he port transm itted a fra me t[...]

2-1035 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port Relat e d Commands set port disable set port enable show port status Lem-Re j-Ct Number o f times a conn ection was reject ed bec ause of ex cessi ve LEM errors . Last-T ime-Clea red Last time[...]

2-1036 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt arp-insp ection show port a rp-inspection T o disp lay the dr op thre shold, the shutdown thresh old, an d the D AI tr ust statu s for spec ific ports, use t he show port arp-inspection co mman[...]

2-1037 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port a uto-mdi x show po rt au to-mdix T o displ ay th e status of the au to mat ic Me dia -De pende nt Int erfac e C rossover (MDIX) fea ture on a port , use the show port auto-mdix comman d. show[...]

2-1038 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt au xiliaryvl an show port auxiliaryvlan T o display the port auxiliary VLAN status for a sp ecif ic port, use the sho w port aux ili aryv lan comm and. sho w port au xili aryvlan { vlan | untag[...]

2-1039 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port au xiliaryv lan This exam ple sh ows how to displa y the status of t he sw itch tha t d oes no t send any aux ilia ry V LAN information in the CDP packets: Console> (enable) show port auxil[...]

2-1040 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt br oadcas t show port b roadcast T o display broadcast information, use the show port br oadcast comma nd . show port broadcast [ mod [ /po rt ]] Syntax D escr i pti on Defaults Thi s command h[...]

2-1041 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port br oad ca st Relat e d Commands set port broadcast T otal-Drop Number of broad cast, multic ast, and u nicast pa ckets d ropped because the port bro adcast l imit was e xceeded. V iola tion A [...]

2-1042 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s show port c apabilities T o display the capabilit ies on the ports, use the show port capabilit ies comm and. show port capabilities [ mo d [/ port ]] Syntax D escr i pti on Defa[...]

2-1043 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port capabilities Trunk encap type 802.1Q,ISL Trunk mode on,off,desirable,auto,nonegotiate UDLD yes Console> This e xample shows th e port capabilities on a 48-port 1 0/100B ASE-TX switchin g se[...]

2-1044 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s This e xample sho ws the port capabi lities on a 24- port FXS anal og station interf ace services-conf igured module : Console> show port capabilities 3/2 Model WS-X6624-FXS P[...]

2-1045 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port capabilities Ta b l e 2 - 7 1 describ es the possibl e fields (dep ending on th e type of port queried ) and the values in th e show port capabilities c omman d outp ut. T able 2-71 sho w por [...]

2-1046 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s Relat e d Commands set port broadcast set port channel set po rt s ec u rity set port spee d set spantree portf ast set trunk show port show port voice active Sync restart delay [...]

2-1047 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sho w po r t cd p show po rt cd p T o display the port CDP enable state and the message interv al, use the show port cdp comman d. show port cdp [ mod [ /port ]] Syntax Descript ion Defaults Thi s comma[...]

2-1048 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt cd p Relat e d Commands set cdp show cdp[...]

2-1049 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port c hannel show port c hannel T o disp lay Et herC han nel inf ormat ion, use the show port channel comm and. show port channel [ all | mod [ /port ]] [ statistics ] show port channel [ all | mo[...]

2-1050 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel Exam ples Th is exampl e sh ows how to displ ay E the rne t ch ann eli ng i nfo rmat ion fo r modu le 1: Console> show port channel 1 Port Status Channel Admin Ch Mode Group Id ----[...]

2-1051 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port c hannel Port Port Portfast Port Port priority vlanpri vlanpri-vlans ----- -------- -------- ------- ------------------------------------------------ 1/1 32 disabled 0 1/2 32 disabled 0 Port I[...]

2-1052 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel 3/3 enabled normal disabled 3/4 enabled normal disabled Console> Console> (enable) show port channel 1 info gvrp Port GVRP GVRP GVRP status registeration applicant ----- --------[...]

2-1053 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port c hannel Speed Spee d s etti ng for the por t (a uto, 10, 10 0, 1000) . Dupl ex Duplex setti ng for the por t (auto, ful l, half). Vlan VLAN to which t he port belongs. Port priority Priority [...]

2-1054 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel Relat e d Commands set port channel show channel sho w chann el gro up GVRP regist ration Stat us of the ad ministra tive control of an outbo und port (nor mal, fixed, forbidden). Qos-[...]

2-1055 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port cops show port c ops T o display COPS informat ion on all or individual port s, use the s how port cops command . show po rt co ps [ mod [ /port ]] Syntax Descript ion Defaults Thi s command h[...]

2-1056 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co ps This example shows how to display COPS informa tion fo r a specific port: Console> show port cops 1/1 Port Admin Roles Oper Roles ------ ------------------------------- ---------------[...]

2-1057 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t count ers show port c ount ers T o sho w all the counters fo r a port, u se the show port count ers command . show port counters [ mod [ /port ]] Syntax Descript ion Defaults Thi s command ha[...]

2-1058 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co unters Ta b l e 2 - 7 5 describ es the possib le fields (de pending on the port t ype que ried) in th e show port count ers comm an d o utpu t. Relat e d Commands clear co unters show port T[...]

2-1059 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port de bou nc e show port d ebounce T o displa y whether the port debo unce timer s are enabled or disable d , use the show port debounc e comm and. show port debounce [ mod | mod/ port ] Syntax D[...]

2-1060 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt dh cp-sno oping show port d hcp-snooping T o d isplay t he port specific DHC P snoopi ng co nfiguration , use the show port dhcp-snooping comm and. show port dhcp-snooping [ mod [ /ports ]] Syn[...]

2-1061 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port dhcp -snoopi ng Console> (enable) This exam ple sh ows how to displ ay the DHCP snoopi ng configura tion o n m od ule 1 por ts : Console> show port dhcp-snooping 1 Port Trust Source-Guar[...]

2-1062 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1q-all-ta gged show port d ot1q-all-tagged T o sho w the status of the dot1q-a ll-tagged featur e on all or specif ic ports, use the show port dot1q-all-tagged com mand. show port dot1q-all[...]

2-1063 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port do t1q-eth ertype show port d ot1q-ethertyp e T o s how the stat us of t he 8 02. 1q Eth er type field on a ll or spec ific port s, us e t he show port dot1q-ethertype comm and. show port dot1[...]

2-1064 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1qtunn el show port d ot1qtunnel T o d isplay the dot1q tun nel mo de sta tus, use the show port dot1qtunnel command. show port dot1qtunnel [ mod [ /port ]] Syntax D escr i pti on Defaults [...]

2-1065 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt dot1 x show po rt dot1x T o displa y all the conf igurable and current sta te va lues associated wit h the authent icator port access entity (P AE) and bac kend authentic ator and statistics [...]

2-1066 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1x Exam ples This example sho ws ho w to display all the conf igurable and current state v alues associated with the authe ntica tor P AE and ba ckend au then ticato r on a specific port : [...]

2-1067 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t errdi sable-t imeout show port e rrdisable-ti meout T o displ ay the c onfiguration and st atus of t he errd isable time out for a particu lar port , use th e show port errdisable -timeout co[...]

2-1068 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt er rdisable -timeout This e xample sho ws the outp ut for a por t in errdisab led state with the timeout flag disable d and the reason di sabled : Console> show port errdisable-timeout 3/3 P[...]

2-1069 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t errorde tection show port e rrordetect ion T o display informat ion about port error detec tion, use the sh ow port err ordetection command. show port errordetection [ mod [ /port ]] Syntax D[...]

2-1070 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt f low c ontrol show port fl owcontrol T o display per-por t status inf ormation and statistics rela ted to fl ow control, use the show port flowcont rol command. sh ow po r t fl ow c on tro l [[...]

2-1071 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t flowcontr ol Ta b l e 2 - 7 6 descri bes the f iel ds in the s how p or t f low c on tr ol command outp ut. Relat e d Commands set po rt f lowco n trol T able 2-76 sho w por t flow control Co[...]

2-1072 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt i nli ne power show port in linepower T o display the port power admini strati on and opera tional status, use the show p o rt i nl i nep ower comm and. show port inlinepo wer [ mod [ / port ]][...]

2-1073 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port inl ine p owe r This exam ple shows how to displ ay t he de tailed power sta tus f or mo dule s and i ndividual po rts: Console> show port inlinepower 4/1 detail Configured Default Inline P[...]

2-1074 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt i nli ne power Relat e d Commands set inlinepowe r set po rt i nl in epow er show environment Port Modul e nu mb er and por t nu mb er . Max Po wer mW atts Maximum po wer (milliwatts) associate[...]

2-1075 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow po rt jumb o show port jumbo T o display th e jumbo fram e setting s for all port s with the feat ure enab led, use the show port jumbo comm an d. show port jumbo Syntax Descript ion This c omm an[...]

2-1076 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l 2pr otocol-t unn el show port l2 pro tocol-tun nel T o d isplay L ayer 2 pr ot ocol tu nnel ing info rma tion on a po rt o r ra nge o f por ts, u se the show por t l2protocol-tunnel command .[...]

2-1077 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port lacp-c hannel show port la cp-channel T o display informat io n about LA CP channels b y port or module number , use the show port lacp-channel comman d. show port la cp-channel [ mod [/ port [...]

2-1078 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l acp -channe l This exam ple sh ows how to displa y LACP channe l inf orm atio n f or all por ts on m odu le 4: Console> show port lacp-channel 4 Port Channel Admin Ch Partner Oper Partner [...]

2-1079 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port lacp-c hannel This exam ple shows how to displ ay L ACP channel st at istic s for po rt 7 on m odule 4: Console> show port lacp-channel 4/7 statistics Port Admin LACP Pkts LACP Pkts Marker [...]

2-1080 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac show port mac T o displa y port MA C coun ter inf ormat ion, u se the show port mac command. show port mac [ mod [ / po rt ]] Syntax D escr i pti on Defaults Thi s command has no de fa ult [...]

2-1081 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show p ort mac Ta b l e 2 - 7 8 describes the possible fields in th e show p ort ma c comman d outpu t. Relat e d Commands clear co unters T able 2-78 sho w por t mac Command O utput Fields Field Descri[...]

2-1082 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac -addres s show port mac-add ress T o displa y the MA C address as sociat ed with a ph ysical por t or ports, use the show port mac-address comm and. show port mac-address [ mod [/ port ]] S[...]

2-1083 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow po rt mac -ad d re ss Port Mac address ----- ---------------------- 5/1 00-d0-d3-33-80-9c 5/2 00-d0-d3-33-80-9d . . . 5/48 00-d0-d3-33-80-cb Port Mac address ----- ---------------------- 7/1 00-50[...]

2-1084 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ne gotiati on show port n egotiation T o di splay the link n egotiat ion pro toco l se ttin g f or t he sp ec ified por t, use t he show port negot iati on comm and. show port negotiation [ mo [...]

2-1085 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port p rbs show po rt pr bs T o di splay the por ts t hat are runn ing t he Pseu do Rando m Bina ry Seque nce (PRB S) te st a nd t o di spla y the counter v alues for ports on which the test has ru[...]

2-1086 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt pr otocol show port p rotocol T o v iew proto co l filters co nfigured on the E the rChan ne l por ts , use the show port protocol comma nd. show port protocol [ mo d [/ port ]] Syntax D escr i[...]

2-1087 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port qo s show po rt qo s T o display QoS-related inform ation, use the show port qos comman d. show port qos [ mo d [ /po rt ]] Syntax Descript ion Defaults Thi s command has no de fa ult set ting[...]

2-1088 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt qo s Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 2/1. Console> This e xample sho ws how to display QoS-related inf ormation for a single [...]

2-1089 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port qo s Config: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 4/1. Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is mapp[...]

2-1090 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt rsvp show port rsvp T o di splay RSVP i nforma ti on on a per- por t basi s, use the show port rsvp co mmand . sho w port rs vp [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command ha[...]

2-1091 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po r t se cur ity show port se curity T o vie w port security conf iguration informatio n and statistics, us e the show po rt se curity co mmand. sho w port security [ mod [ /port ]] sho w port sec[...]

2-1092 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s ecu rity Port Secure-Src-Addrs Age-Left Last-Src-Addr Shutdown Shutdown-Time-Left ---- ----------------- -------- ----------------- -------- ------------------ 4/1 00-11-22-33-44-55 60 00-11-[...]

2-1093 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po r t se cur ity This e xample shows ho w to display security statistic al information for a specif ic module: Console> show port security statistics 2 Port Total-Addrs Maximum-Addrs ----- ----[...]

2-1094 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s ecu rity-acl show port se curity-acl T o displa y the port acce s s control list (P A CL) mode and th e status of a P A CL mer ge oper ation, use the sho w port security- acl command . sho w [...]

2-1095 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt secur ity-acl dhcp-snooping: Port Trust Source-Guard Source-Guarded IP Addresses ----- ----------- ------------ --------------------------- 3/1 untrusted disabled Console> (enable) Relat e[...]

2-1096 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s pan tree show port sp antree T o v iew port spa nnin g t ree in for ma tio n, use the show port spantree command. sho w port sp antr ee [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s [...]

2-1097 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port sta tus show port st atus T o disp lay po rt st atus informa tion, use the show port status co mmand . show port status [ mo d [ /port ]] Syntax Descript ion Defaults Thi s command has no de f[...]

2-1098 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt sync-re start-de lay show port sync-restart-delay T o display a port’ s synchronization restar t delay , use the show port sync -res tart-de lay command . sho w port sync-r estart-delay mod/ [...]

2-1099 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po r t tdr show port tdr T o display the results of the T ime Domain Reflectometer (TDR) test on a port , use the show port td r comm and. show port tdr [ mo d [ /port ]] Syntax Descript ion Defaul[...]

2-1100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t dr Port Speed Local pair Pair length Remote pair Pair status ---- ------ ---------- ----------------------- ----------- ------------ 5/3 1000 Pair A running tdr test n/a n/a Pair B running td[...]

2-1101 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt trap show port trap T o disp lay po rt tra p status, use the show port trap comman d. show port trap [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Co[...]

2-1102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t runk show port trunk T o display port trunk info rmation, use the sho w port trunk co mm an d. show port trunk [ mo d [ /port ]] Syntax D escr i pti on Defaults Thi s command has no de fa ult[...]

2-1103 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show p ort trun k Ta b l e 2 - 8 1 descri bes the f iel ds in the show port trunk comma nd output . Relat e d Commands set trunk T able 2-81 sho w por t tr unk Command Output Fi elds Field Description P[...]

2-1104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt un icast-f lood show port unicast-flood T o d isplay the run -time c onfigura tion o f the po rt us ing unic ast floo d b lock ing, us e the show port unicast-flood comm and. show port unicast-[...]

2-1105 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port vlan- mapping show port vl an-mapping T o d isplay the curre nt VL AN mapp ing co nfigurat ion on a sp ec ified por t, u se the show port vlan-mapping comm and. show port vlan-mapping [ mo d [[...]

2-1106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e show port voice T o display vo ice port informat ion, use the show po rt voi ce co mmand . sho w port v oice [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult s[...]

2-1107 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt voice Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 dns-sj3.cisco.c* cisco.com dns-sj4.cisco.c 7/2 dns-sj3.cisco.c* cisco.com dns-[...]

2-1108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e 7/5 10.34.1.11* - 10.34.1.11 10.34.10.1 10.34.16.10 10.34.42.11 (*):Primary Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 17[...]

2-1109 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t voice act ive show port vo ice active T o displa y acti ve call inform ation on a port, use the show port voice active co mman d. show port voice active [ mo d/po rt ] [ al l | call | conf er[...]

2-1110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive Exam ples T h is ex am p l e s h ow s how t o d i s p l a y a ll calls (regular calls, conference calls, an d transcoding calls) in the system: Console> show port voice active [...]

2-1111 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t voice act ive Fax Transmit Duration : 332433 Hi Water Playout Delay : 23004 ms Logical If index : 4 Low water playout delay : 234 ms Receive delay : 23423 ms Receive bytes : 2342342332423 Rec[...]

2-1112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive Low water playout delay : 234 ms Receive delay : 23423 ms Receive bytes : 2342342332423 Receive packets : 23423423402384 Transmit bytes : 23472377 Transmit packets : 94540 Console[...]

2-1113 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt v o ice f dl show port vo ice fdl T o display the facilitie s data link (FDL) s ta ti st ics for the specified ports, use the show port voice fd l comm and. sho w port v oice f dl [ mod [ /po[...]

2-1114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e fdl Ta b l e 2 - 8 3 descri bes the pos sible fields (dep endi ng on the po rt type querie d) in the s how p ort vo ic e fd l comm an d o utpu t. Relat e d Commands sho w port v oice T [...]

2-1115 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt v o ice i nter fac e show port vo ice interf ace T o d i s p l a y t h e port vo ice interface configuration, us e t h e show port v oice interf ace comm and. show port voice interf ace [ mod[...]

2-1116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v tp show port vtp T o display the status of VLA N T runk Pro tocol (VT P) on a per-port basis, use the show port vtp comm and. show port vtp [ mod [/ port ]] Syntax D escr i pti on Defaults Th[...]

2-1117 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port vtp 3/16 enabled 3/17 enabled 3/18 enabled 3/19 enabled 3/20 enabled 3/21 enabled 3/22 enabled 3/23 enabled 3/24 enabled 3/25 enabled 3/26 enabled 3/27 enabled 3/28 enabled 3/29 enabled 3/30 e[...]

2-1118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pro c show proc T o display CPU, memory allocatio n, and process utilizatio n information, use the show proc command. show pr oc [ cpu | mem ] Syntax D escr i pti on Defaults Thi s command has no de [...]

2-1119 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show proc Memory Pool Utilization Memory Pool Type 1Min 5Min 10Min ---------------- ----- ----- ----- DRAM 49% 49% 49% FLASH 82% 82% 82% NVRAM 49% 49% 49% MBUF 2% 2% 2% CLUSTER 12% 12% 12% MALLOC 15% 15[...]

2-1120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pro c 44 -2 16 0 16 Backend_Rx 45 -2 16 0 16 Backend_SM 46 -2 3216 2992 224 Debug Port Coun 47 -2 16 0 16 SysLogTask 48 -2 112 0 112 pinggateA 49 -2 8704 8000 704 cdpd 50 -2 124576 124416 160 cdpdtim[...]

2-1121 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show proc 5Min A verage me mory poo l usage o ver the last 5-minute int erva l. 10Mi n A vera ge m em ory pool usage over the la st 10 -min ute i nterval. TTY TTY associ ated with the proces s. Proces s[...]

2-1122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pro to colfilter show proto colfilter T o list whether protoco l filte ring is enable d or disabled, use the show protocolf ilter command. sho w prot ocolf il ter Syntax D escr i pti on This c omm an[...]

2-1123 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pvlan show pvlan T o s how th e co nfigur at ion fo r a given private VLA N, u se t he show pvlan command. show pvlan [ vlan | primary | isol ated | community | twoway-com munity ] Syntax Descript [...]

2-1124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n This e x ample sho ws how to display the status for all VLANs set a s isolated: Console> show pvlan isolated Primary Secondary Secondary-Type Ports ------- --------- -------------- --------[...]

2-1125 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pvlan capability show pvlan capability T o d eterm i ne w he the r or not a por t c an be ma de a p riv ate port, u se the show pvlan capability comm and. show pvlan capability mod/port Syntax Desc[...]

2-1126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n capabi li ty Console> (enable) show pvlan capability 5/3 Ports 5/1 - 5/12 are in the same ASIC range as port 5/3. Port 5/3 cannot be made a private vlan port due to: -----------------------[...]

2-1127 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pvlan mapp ing show pvlan mappi ng T o s how the priv ate VLA N m a pping s c onfigure d on pro mi scuous po rt s, use th e show pvlan mapping comm an d. show pvlan mapping [ priv ate_ vlan | mod/ [...]

2-1128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n mappin g Relat e d Commands clear co nfi g pvlan clear pvlan mapping clea r vlan set pvlan set pvlan mapping set vlan show vlan[...]

2-1129 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos acl editbuff er show qos acl editbuffer T o display A CL names in the edit buf fer , use the show qos acl editbuffer command. show qos acl editbuffer Syntax Descript ion This c omm and ha s no [...]

2-1130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl info show qos acl in fo T o display QoS A C L information, use the show qos acl info comman d. show qos acl info default-action { ip | ipx | mac | all } show qos acl inf o runtime { ac l_nam[...]

2-1131 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos acl info 2. set qos acl ip my_ip_acl trustdscp microflow my-micro aggregate agg tcp 173.22.3.4 255.0.0.0 eq port 19 173.22.20.1 255.255.255.0 tos 5 ACL status: Not Committed Console> (enable[...]

2-1132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl map show qos acl map T o display the ACL mapping inform ation, use the show qos acl map command. show qos acl map { config | runtime } { acl_nam e | mod/por t | vlan | all | all-vlans | all-[...]

2-1133 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos acl map This exam ple shows how to di spla y inf orma tio n for a spec ific VL AN: Console> show qos acl map 1 Vlan ACL name ---- ---------------- 1 web-acc Console> This exam ple shows h[...]

2-1134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl resou rce-us age show qos acl resou rce-us age T o disp lay ACL mana gement in forma tion, use t he show qos acl resour ce-usage comman d. show qos acl r e source-usage Syntax D escr i pti o[...]

2-1135 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qo s bridged-m icrofl ow-polic ing show qos bridged -microflow-p olicing T o displa y the VLAN-b ridged packe t-polic ing status , use the sho w qos bridged-pack et-policing comm and. show qos brid[...]

2-1136 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info show qos info T o display QoS-related inf ormation for a specif ied port, use the sho w qos i nf o comman d. show qos inf o { runtime | co nfig } { mod / port } show qos info conf ig port_t[...]

2-1137 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos info The num ber pr eceding the p lette r in the port_type value (for ex ample , 1p2q2t an d 1p1q4t ) determines the threshold in the prio rity queue. The 1p2q1t an d 1p1q8t po rt t ype s a re [...]

2-1138 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple sh ows how to displ ay a ll Q oS- relat ed NV RA M thr esh old info rmat ion: Console> (enable) show qos info config 2q2t tx QoS setting in NVRAM for 2q2t transmit: QoS is [...]

2-1139 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos info This exam ple sh ows anothe r di splay of the cur rent QoS ru nti me inf orm ation : Console> show qos info runtime 8/1 Run time setting of QoS: QoS is enabled Policy Source of port 8/1[...]

2-1140 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple shows how to di splay t he cu rrent QoS c onfigurat ion i nfor ma tion: Console> (enable) show qos info config 8/1 QoS setting in NVRAM: QoS is disabled Port 8/1 has 3 tran[...]

2-1141 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos info This exam ple shows anothe r di sp lay of the c urre nt QoS c onfigurati on i nf ormat ion : Console> (enable) show qos info config 1p2q2t tx QoS setting in NVRAM for 1p2q2t transmit: Q[...]

2-1142 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s mac-cos show qos mac-cos T o display the cu rrently con figur ed QoS-related information fo r the MA C address and VLAN pa ir , use the show qos mac-cos command . show qos mac-cos de st_m ac [ v[...]

2-1143 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos mac-cos Relat e d Commands clea r q o s m a c- co s set qos mac- cos[...]

2-1144 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps show qos maps T o d isplay the mappi ng o f d ifferent ma ps, use the show qos maps command. show qos maps { conf ig | runtime } [ cos-d scp -ma p | ipprec-dscp-map | dscp-cos- map | police[...]

2-1145 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow qo s map s Exam ples Th is exampl e sh ows how to displa y the co s-dscp- map ma p: Console> show qos maps cos-dscp-map CoS - DSCP map: CoS DSCP --- --------------- 0 10 ... 7 52 Console> Th[...]

2-1146 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps DSCP - CoS map: DSCP CoS --------------- ---- 34-40,60 0 ... 50 7 DSCP policed-dscp map: In-profile DSCP Policed DSCP --------------- ------------- 0-20 0 Console> This exam ple sh ows h[...]

2-1147 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow qo s map s 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 31 31 32 32 33 33 34 34 35 35 36 36 37 37 38 38 39 39 4[...]

2-1148 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps This exam ple sh ows how to displa y the NVRAM C oS-to- CoS ma p: Console> show qos maps config cos-cos-map CoS - CoS map: CoS CoS --- ---- 0 0 1 5 2 4 3 5 4 4 5 5 6 6 7 7 Console> Th[...]

2-1149 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos poli cer show qos poli cer T o displ ay micr oflow or a ggreg ate pol icers cu rrentl y conf igured, use the show qos policer comm and. show qos policer { config | runtime } { mi croflo w [ pol[...]

2-1150 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s policer This exam ple sh ows how to displa y mi cr oflow polic ing in forma tion: Console> show qos policer config microflow QoS microflow policers: Microflow name Average rate Burst size Exc[...]

2-1151 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos poli cy-sour ce show qos policy-source T o d isplay the QoS po licy sour ce i nfor ma tion, use th e show qos policy-source comman d. show qos policy-sour c e Syntax Descript ion This c omm and[...]

2-1152 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s rsvp show qos rsvp T o display RSVP information, use the show qos r svp command. show qos rsvp { info | flo w-inf o } Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Co[...]

2-1153 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos stati stics show qos statistics T o displa y the v arious QoS-r elated counter s fo r a specif ied port, us e the sho w qos st ati sti cs comman d. show qos statistics { mod [ /p ort ]} show qo[...]

2-1154 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s statist ics This e xample shows ho w to display the QoS Layer 3 statistics: Console> show qos statistics l3stats Warning: QoS is disabled. QoS Layer 3 Statistics show statistics since last re[...]

2-1155 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos statistics exp ort info show qos statistics export info T o displa y QoS data export configurati on and stati stical informat ion, use t he show qos st atistics export inf o comman d. show qos [...]

2-1156 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s status show qos status T o d i s p l ay if QoS is enabled on the switch, u s e t he show qo s status comm and. show qos status Syntax D escr i pti on This c omm and has n o keywords or a rgument[...]

2-1157 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show radius show radius T o disp lay co nf igured RAD IUS par ameter s, use the show r adius command . show radi us [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings. Com[...]

2-1158 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rate-l im it show rate-limit T o display rate-limiter settings and information , use the show rate-limit co mmand. show rate- limit [ config ] Syntax D escr i pti on Defaults Thi s command has no de [...]

2-1159 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show rate-limit FIB RECEIVE Off * * FIB GLEAN Off * * MCAST PARTIAL SC Off * * RPF FAIL On 500 10 TTL FAIL Off * * No Route On 500 10 ICMP UNREACHABLE On 500 10 ICMP REDIRECT Off * * MTU Fail Off * * Co[...]

2-1160 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rcp show rcp T o display rcp informatio n, use the sho w r cp command . show r cp Syntax D escr i pti on This c omm and has n o keywords or a rgument s. Defaults Thi s command has no de fa ult set ti[...]

2-1161 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show reset show reset T o display scheduled reset informatio n, use the show reset command. show r eset Syntax Descript ion This c omm and ha s no keywords or argume nts. Defaults Thi s command has no d[...]

2-1162 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rgm p group show rgmp group T o display all mult icast groups or the c ount of m ulticast gr oups that are jo ined b y RGMP-cap able router s, use the show rgmp group command . show r gmp group [ mac[...]

2-1163 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show r gmp statisti cs show rgmp statistics T o displa y all the RGMP-rel ated statis tics for a gi ven VLAN, use the show r gmp statistics command. show r gmp statistics [ vlan ] Syntax Descript ion De[...]

2-1164 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rspan show rspan T o display the remote SP AN configuratio n, use the show rspan command. show rspan Syntax D escr i pti on This c omm and has n o keywords or a rgument s. Defaults Thi s command has [...]

2-1165 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s s ho w r s pan Destination : Port 6/1 Rspan Vlan : 906 Admin Source : - Oper Source : - Direction : - Incoming Packets: disabled Learning : - Multicast : - Filter : - -----------------------------------[...]

2-1166 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig show running-con fig T o display the conf iguratio n information currently running on the switch or the conf iguration for a specif ic A CL, use the show running-conf ig co mman d. [...]

2-1167 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ru nning-con fig # ***** NON-DEFAULT CONFIGURATION ***** ! ! #time: Mon Jun 11 2001, 08:22:17 ! #version 6.3(0.56)PAN ! ! #! #vtp set vtp domain dan set vtp mode transparent set vlan 1 name default[...]

2-1168 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig set vlan 11 3/2 ! #module 4 empty ! #module 5 : 0-port Switch Fabric Module ! #module 6 empty ! #module 7 empty ! #module 8 empty ! #module 9 empty ! #module 15 empty ! #module 16 e[...]

2-1169 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show secu rity acl show security acl T o displa y the conte nts of the VACL that are c urrently c onfigured or last c ommitted t o NVRAM and hardwa re, use th e show security acl comman d. show security[...]

2-1170 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l Exam ples Th is example shows ho w t o display the na me and type of the VACLs c urren tly confi gured : Console> show security acl ACL Type VLANS (Statistics) --------------------[...]

2-1171 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show secu rity acl 1. 1 00-20-20-20-20-22 set security acl adjacency b_4 --------------------------------------------------- 1. 1 00-20-20-20-20-23 set security acl ip ip1 ------------------------------[...]

2-1172 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l Relat e d Commands clea r security acl commit ro llback[...]

2-1173 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl arp-inspection show security acl a rp-inspection T o di splay A dd ress R esolu tion Pr otoc ol (ARP) i nspec tion i nfor mat ion, use the show security acl arp-inspection comman d. sh[...]

2-1174 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity acl ca pture-p ort s show security acl c apture-ports T o display the c apture po rt list, use th e show secur ity acl captur e-ports com mand. sho w securi ty acl ca ptur e-ports Syntax D[...]

2-1175 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security ac l cram show security acl c ram T o display information ab out CRAM, use the show security acl cram command. sho w securi ty acl cra m Syntax Descript ion This c omm and ha s no a rgume [...]

2-1176 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity acl f eature rate limit show security acl fe ature ratelimit T o displ ay the rate at which packe ts are sent by securit y A C L featur es to the sup ervis or engine for processing and to [...]

2-1177 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl log show security acl lo g T o d isplay V A CL log i nfor ma tion, use th e show security acl log command. show security acl log co nfig show security acl log fl ow pr ot ocol { src_ip[...]

2-1178 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l l og Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes This c omma nd is sup por ted on sy stem s [...]

2-1179 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl log Exam ples Th is example sh ows how to displa y V A CL lo g in for mati on: Console> (enable) show security acl log config VACL LOG Configration ---------------------------------[...]

2-1180 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l map show security acl map T o display ACL-to -VLAN or ACL- to-port mappin g for a specific ACL , port, or VLAN, us e the show security acl map comma nd. show security acl map { config[...]

2-1181 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl map This exam ple shows how to displ ay ACL mappi ngs that are stor ed in NVR AM for all po rts: Console> show security acl map config all-ports ACL Name Type Ports ----------------[...]

2-1182 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l re source -usage show security acl resou rce-us age T o disp lay VACL ma nage ment infor mati on, us e the sho w securit y acl res ourc e-usage co mmand . show security acl r esource-[...]

2-1183 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl tcam interface show security acl tc am interface T o display the TCAM details fo r a specified V LAN, use the sho w security acl tcam int erface comm and. show security ac l tcam inter[...]

2-1184 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p show snmp T o display SNMP informat ion, use the show snmp comma nd. show snmp [ no alias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Swit ch co [...]

2-1185 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp Chassis Alias:my chassis Traps Enabled: None Port Traps Enabled:None Community-Access Community-String ---------------- -------------------- read-only public read-write private read-write-all [...]

Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show snmp acce ss 2-1186 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 show snmp a ccess T o displa y SNMP access inf ormati on, use the show snmp access comman d. show snmp access [ volatile | non volatile | re a d- o n l y ] show snmp access [ -hex ] g r[...]

2-1187 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp access • V ers ion 3 ( SNMPv 3)—T his i s the most recen t v ersi on of SNMP and i s ful ly de scri bed i n RFC 257 1, RFC 2572, RFC 2573, RFC 2574, and RFC 2575. SNMPv3 has significant en[...]

2-1188 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s n m p ac cess- list show snmp access-list T o disp lay SNMP a ccess li st numbe rs and co rresp onding I P addre sses and I P masks , use the show snmp access-list command. Syntax D escr i pti on T[...]

2-1189 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp buffer show snmp buffer T o displa y the num ber of SNM P pa ckets that can be saved in the SNM P UD P soc ket receive buf fe r , use the show snmp buffer command. show snmp b uffer Syntax Des[...]