English dropdown-ico

Grizzly G0513X2 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Grizzly G0513X2, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Grizzly G0513X2 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Grizzly G0513X2. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Grizzly G0513X2 should contain:
- informations concerning technical data of Grizzly G0513X2
- name of the manufacturer and a year of construction of the Grizzly G0513X2 item
- rules of operation, control and maintenance of the Grizzly G0513X2 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Grizzly G0513X2 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Grizzly G0513X2, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Grizzly service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Grizzly G0513X2.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Grizzly G0513X2 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    COPYRIGHT © MAY, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BL9289 PRINTED IN TAIWAN The Model G05 1 3X2 is the same machine as the Model G05 1 3 X ex cept f or the cast iron trunnion assembly . Except fo r details giv en in th[...]

  • Page 2

    -2 - G05 1 3 X2 Manual Inser t G0 5 1 3 X 2 Mai n P ar ts                                          ?[...]

  • Page 3

    G05 1 3 X2 Manual Inser t -3 - G0 5 1 3 X 2 Fen ce / Gu ides P arts                              ?[...]

  • Page 4

    - 4 - G05 1 3 X2 Manual Inser t G0 5 1 3 X 2 P ar ts Li st REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P0513X001 BUSHING 54 PCB23M CARRIAGE BOLT M8-1.25 X 80 2 PSS01M SET SCREW M6-1 X 10 55 P0513055 UPPER WHEEL COVER 3 P0513X003 BUSHING 56 PB10M HEX BOLT M6-1 X 25 4 P0513004 LIFTING EYE BOLT M10-1.5 57 PW03M FLAT WASHER 6MM 5 P0513005 MACHINE B[...]

  • Page 5

    G05 1 3 X2 Manual Inser t -5 - REF PART # DESCRIPTION REF PART # DESCRIPTION 99 PN02M HEX NUT M10-1.5 127 P0513X127 TABLE INSERT 100 P0513100 SMALL GEAR 128 P0513X128 TABLE PIN 101 P0513X101 LOCK HANDLE 129 P0513X129 LOCATE BUSHING 102 P0513102 TRUNNION SUPPORT BRACKET 130 P0513X130 BUSHING 103 PLW06M LOCK WASHER 10MM 131 PSBS01M BUTTON HD CAP SCR [...]

  • Page 6

    - 6 - G0 5 1 3X2 M anual Insert REF PART # DESCRIPTION REF PART # DESCRIPTION 167 PB07M HEX BOLT M8-1.25 X 25 178 P0513X2178 TRUNNION SUPPORT BRACKET 168 P0513X101 LOCK HANDLE M8-1.25 179 P0513100 SMALL GEAR 169 PW05M FLAT WASHER 4MM 180 PSBS19M BUTTON HD CAP SCR M10-1.5 X 30 170 P0513120 POINTER 181 P0513X2181 RIGHT COVER 171 PS17M PHLP HD SCR M4-[...]

  • Page 7

    G05 1 3 X2 Manual Inser t - 7 -                       ?[...]

  • Page 8

    -8- G05 1 3 X2 Manual Inser t    ?[...]

  • Page 9

    MO DE L G0 5 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 E X T RE ME SE RIE S B AN DS A W O WNER'S MANU AL COPYRIGHT © JAN UAR Y , 2 00 6 BY G RIZ ZL Y IN DUSTRIAL , IN C. RE VISED FEBRUAR Y , 20 07 ( TR) W ARN I NG : NO P OR TI O N OF T HI S M AN UAL M A Y B E REPR OD UCE D I N AN Y SH APE OR FOR M W IT HO UT T HE W RI T TEN A PPROV A L OF G RI Z Z L [...]

  • Page 10

     ?[...]

  • Page 11

    T able of Con te nts INTRODUCTION ............................................................................................................................... 3 Foreword .................................................................................................................................... 3 Contact Info .............................[...]

  • Page 12

    SECTION 5: ACCESSORIES ......................................................................................................... 43 SECTION 6: MAINTENANCE ........................................................................................................ 45 Schedule ..............................................................................[...]

  • Page 13

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -3 - If you have any comments regarding this manual, please write to us at the address below: Grizzly Industrial, Inc. C / O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 We stand behind our machines. If you have any service questions or parts requests, please [...]

  • Page 14

    - 4 - G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2 Model G0513X MACHINE DATA SHEET Cu[...]

  • Page 15

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -5 - The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2 Model G0513X Table Information Tabl[...]

  • Page 16

    - 6 - G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series Band saw G0 5 1 4 X Mach i ne Data Sheet The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2 Mo[...]

  • Page 17

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 7 - The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2 Model G0514X Table Information Tab[...]

  • Page 18

    -8- G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2 Model G0514X3 MACHINE DATA SHEET Cus[...]

  • Page 19

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -9 - The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2 Model G0514X3 Table Information Tab[...]

  • Page 20

    - 1 0 - G 05 1 3 X / G0 5 1 4 X / G05 1 4 X3 Ex treme Series Bands aw Figure 2. Bandsaw back view. A. Tension Indicator Window B. ON/OFF Switch C. Rip Fence D. Fence Locking Lever E. Dust Port 4" F. Miter Gauge G. Blade Tension Handwheel H. Ball Bearing Roller Guides I. Guide Post J. Guide Post Handwheel K. Blade Tracking Window Identi f ica t[...]

  • Page 21

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 1 1 - 4. ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage. 5. WEAR PROPER APPAREL. DO N OT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. Wear protective hair covering to con - ta[...]

  • Page 22

    - 1 2- G05 1 3X / G05 1 4X / G05 1 4X 3 E x treme Series Bandsaw 7. ONLY ALLOW TRAINED AND PROP- ERLY SUPERVISED PERSONNEL TO OPERATE MACHINERY. Make sure operation instructions are safe and clearly understood. 8. KEEP CHILDREN AND VISITORS AWAY. Keep all children and visitors a safe dis- tance from the work area. 9. MAKE WORKSHOP CHILD PROOF. Use [...]

  • Page 23

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 1 3 - A ddit io na l Safe t y Instr uctio n s fo r Ban dsa w s 7. BLADE SPEED. Allow blade to reach full speed before cutting. 8. LEAVING WORK AREA. Never leave a machine running and unattended. Allow the bandsaw to come to a complete stop be - fore you leave it unattended. 9. FEED RA[...]

  • Page 24

    - 1 4- G0 5 1 3X / G05 1 4 X /G 05 1 4X 3 Ex treme Series Bandsaw Serious p erson al injury could oc cur if you connect the machine to t he power source before you h av e compl eted the set up pro - cess . DO NOT conne ct the ma chine to th e power source until instruct ed to do so. Operati on S E C T I O N 2: C I R C U I T R E Q U I R E M E N T S [...]

  • Page 25

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 1 5 - In the ev ent of an ele ctric al shor t, grounding reduces the r isk of electri c shock . The grounding wire in t he p owe r c ord must be properly connec t - ed to the grounding prong on the plug ; like wise , the out let must be properly installed and ground - ed. All elec tri[...]

  • Page 26

    - 1 6 - G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw The Model G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 was c are- fully packed when it left our wa rehouse. If you dis cover the mach ine i s d amage d af ter you ha ve sig ned for delivery , ple ase imm ediately cal l Customer Servic e at ( 5 7 0) 5 46 - 9 66 3 for advice. Sav e t he [...]

  • Page 27

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 1 7 - In v ent o r y After all the par ts hav e been removed from t he crate , you should hav e the following items: Crate Conte nts ( Figur e 7 & 8 ): Qt y A . Bandsaw (not shown) ................................. 1 B. T able ......................................................[...]

  • Page 28

    - 1 8 - G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X3 Ex treme Series B andsaw Hard w are Reco gn i ti on Ch ar t[...]

  • Page 29

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 1 9 - Figure 9. G0 5 1 3X minimum working c learances. Fl oo r Loa d Refe r to the Machine Data She et for t he weight and foot print spec ific atio ns of your mac hine. Some floors ma y r equire a dditio nal rein forcement to sup por t b oth the machine and o perator . Wo rk ing Clea[...]

  • Page 30

    -20- G 05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series Band saw Mo vi n g & P la c in g Ba se Un i t Figure 11. Lifting the bandsaw. This is an extrem ely heav y machine. Serious per sonal injury may occur if safe moving methods are not followed. T o b e safe, you will ne ed assist ance and a forklift or a hoist when removing the machine f[...]

  • Page 31

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 2 1 - Figure 14. Quick release tension lever. Tighten Loosen 2. Adjust the upper and lower blade guides away from the blade. Refer to Adjusting Blade Guide Bearings on Page 29 for more details. 3. Open the upper and lower wheel covers, and slide the blade off of both wheels. All saw b[...]

  • Page 32

    -22- G05 1 3X /G 05 1 4X/ G0 5 1 4 X3 Ex treme Series B andsaw Bl ade T rac ki n g Personal injury or death can occur if the machine starts while your hand is touching the bandsaw wheel during tracking adjustments. Disconnect power from the bandsaw before performing blade tracking adjustments. The blade tracking is primarily affected by the tilt of[...]

  • Page 33

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -23- The p ositive stop allows the table to be quick ly and acc urately returned t o t he horizontal (0˚) position af ter being adjusted to a dif feren t angle. Compone nts and H ardware Ne ede d : Qt y Hex Bolt M8-1.25 x 90 ....................................... 1 Hex Nut M8-1.25 ...[...]

  • Page 34

    -2 4- G0 5 1 3X / G05 1 4X / G05 1 4X 3 E x treme Series Bandsaw Figure 20. Squaring table to blade. 5. Adjust the positive stop bolt to the table and secure it by tightening the hex nut against the trunnion bracket. 6. Check the adjustment for accuracy once you have tightened the hex nut. 7. Loosen the screw on the pointer, but do not remove it. 8[...]

  • Page 35

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -25- 3. Install an M8-1.25 hex nut on the fence handle, then thread the handle into the fence assembly ( Figure 23 ). Tighten the hex nut against the fence pivot block to secure the handle. Figure 23. Handle installed on fence assembly. Hex Nut Pivot Block 4. Thread the M6-1 hex nut ont[...]

  • Page 36

    -26- G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw 7. Tighten the lock handle. 8. Pull the fence handle up and place the fence assembly on the fixed rail as shown in Figure 26 . Figure 26. Correctly installed fence. 6. Slide the resaw fence over the moving plate, as shown in Figure 25 , so the moving plate fits inside the channel o[...]

  • Page 37

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 27 - T ensi o ni ng Bl ade A properly tensioned blade is essential for mak - ing accurate cuts and is required before mak - ing many band saw adjustments. (Ev ery time you replace the blade, y ou should perform this proce - dure be cause all blades tension dif ferently .) To tension t[...]

  • Page 38

    -28- G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X3 Ex treme Series B andsaw 5. Tighten the assembly cap screw. 6. Loosen the cap screw on the support bearing adjustment shaft. 7. Place a 0.016" feeler gauge between the support bearing and the blade, and position the bearing 0.016" away from the back of the blade as illustrated in Figure 29 . Figur[...]

  • Page 39

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -29- The b lade guid es pro vide side -to- side suppor t to help k eep the blade straight while cutting. The blade guid es are d esigned to be adjusted in t wo wa ys— for ward / back ward and side-to -si de. To adjust the upper and lower blade guides : 1. Make sure the blade is tracki[...]

  • Page 40

    -3 0 - G0 5 1 3X / G05 1 4 X /G 05 1 4X 3 E x treme Series Bandsaw NOTICE Make sure that the blade teeth will not con- tact the guide bearings when the blade is against the rear support bearing during the cut or the blade teeth will be ruined. 5. Tighten the cap screw on the lateral adjust- ment rod. 6. Loosen the bearing rotation adjustment cap sc[...]

  • Page 41

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -3 1 - T o ensure cutt ing a ccuracy when the fence is fi rst installed, the fence should be aligned with t he miter slot. To align the fence parallel with the miter slot: 1. If the fence is mounted on the left-hand side of the blade, remove it and remount it next to the miter slot. 2. [...]

  • Page 42

    -32- G05 1 3 X / G05 1 4 X /G 05 1 4X 3 E x treme Series Bandsaw Damag e to your eyes, lungs, and ears could re su lt fro m us ing thi s ma ch in e wi th ou t prope r protec tive ge ar . Always wear safet y glasses , a respirator , and hearing protection when op erat ing t his machine. Lo o s e h a ir a n d c lo t h - ing could get caught in machin[...]

  • Page 43

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -33 - Guide Post Lock Knob Guide Post Handwheel The ST ART / ST OP switch on t he Model G0 5 1 3X / G05 1 4X/ G0 5 1 4 X3 is located on the column fo r easy access ( Figures 37 & 3 8 ). Immediately turn the machine OFF i f there becomes a safe t y hazard. ST ART / ST OP Swit ch Figu[...]

  • Page 44

    -3 4- G 05 1 3 X / G05 1 4 X /G 05 1 4X 3 Ex treme Series Bandsaw Bl ade Lead Bandsaw blades c ommonly wander of f the cut line when sawing, as shown in Figure 41 . This is called blade lead. Blade lead is commonly caused b y too fast o f a f eed rat e, a dull or abused blade, or improper tension. If y our blade is sharp / undamaged and you still h[...]

  • Page 45

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -35 - 3. Clamp the board to the bandsaw table with- out moving it. Now slide the fence over to the board so it barely touches one end of the board. 4. Loosen the four cap screws on top of the fence. 5. Skew the fence so it is parallel to the edge of the scrap piece. You may need to re-a[...]

  • Page 46

    -3 6 - G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X3 Ex treme Series B andsaw Cr oss c uttin g Crosscut ting is the proces s of cut ting across the grain of wood. For ply wood and other proc essed wood, crossc utt ing simply means cut ting across the width of the mat erial. T o make a 90˚ crosscut : 1. Mark the workpiece on the edge where you want to begin[...]

  • Page 47

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -37 - Figure 45. Resawing lumber. Resawing ( Figure 45 ) is the proc ess of cut ting a board into two or more t hinner boards. The ma xi - mum boa rd width that can be r esawn is limited by the ma ximum cut ting height of the bandsaw . One of t he most im por tant consid erations when r[...]

  • Page 48

    -3 8- G 05 1 3 X / G0 5 1 4 X / G05 1 4 X3 Ex treme Series Bands aw Stac k ed Cu ts One of the benefits of a bandsaw is it s abilit y to cut multiple copies of a pa r ticular shape b y stack - ing a number of workpieces together . Before mak - ing stacked c uts, ensure t hat both the t able and the blade are properly adjust ed to 90° . Other wise,[...]

  • Page 49

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -39 - Bl ade Spe ed The blade speed can be adjusted to 1 700 o r 350 0 FP M. Speed adjustments are made by moving the V -belt position on the motor and wheel pul - ley s. Most woodcut ting can be per formed succes sfully at the higher b lade s peeds. Slower blade spee ds generally produ[...]

  • Page 50

    - 40 - G 05 1 3 X / G05 1 4 X /G 05 1 4X 3 E x treme Series Bandsaw Bl ade Inf orm ati o n Selecting the right blade requires a knowledge of the various blade characteristics to match t he blade with the par ti cular cut ting op eration. Bl ad e Len gth Measured by the circumference , bla de lengths are u sually unique to the brand of your bandsaw [...]

  • Page 51

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 4 1- • Hook : The teeth on this style have a posi- tive angle (downward) which makes them dig into the material, and the gullets are usu - ally rounded for easier waste removal. These blades are excellent for the tough demands of resawing and ripping thick material. To ot h Pit ch U[...]

  • Page 52

    - 42- G05 1 3X /G 05 1 4X/ G0 5 1 4 X3 Ex treme Series B andsaw Bl ade Cha n ges T o r emove a blad e : 1. DISCONNECT BANDSAW FROM POWER! 2. Release the blade tension by turning the blade tension quick release lever to the left. 3. Remove the table insert and the table pin. Adjust the upper and lower guide bearings as far away as possible from the [...]

  • Page 53

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -43 - SE CTION 5 : A CC E SSORIE S Replacement Blades These replacement blades are milled for exact tooth set and are made with high quality tool steel. 131 1 ⁄ 2 " Carbon Steel Replacement Blades for the Model G0513X MODEL WIDTH TPI H4803 1/8" 14 RAKER H4804 1/4" 6 HOO[...]

  • Page 54

    - 44 - G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series Band saw Figure 53. Our most popular safety glasses. G7984—Face Shield H1298—Dust Sealed Safety Glasses H1300—UV Blocking, Clear Safety Glasses H2347—Uvex ® Spitfire Safety Glasses H0736—Shop Fox ® Safety Glasses Safety Glasses are essential to every shop. If you already have [...]

  • Page 55

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -45 - SE CTION 6 : MAINT EN AN CE Alwa ys disconnect power to t he ma ch in e b e fo re per forming maintenanc e. Failure to do t his may result in serious pe rson - al injury . Sealed and pre-lubric ated ball bearings require no lubrication for the life of the bearings. All bear - ings[...]

  • Page 56

    - 46 - G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw This sec tion is provided for your c onv enience — it is not a substitute for the Grizzly Ser vic e De part ment. If you need help troub leshooting, you need replacement par ts, or you are unsure of how to per form the pro - cedures in this se ction, then feel free to call our [...]

  • Page 57

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 4 7 - Symptom Possible Cause Possible Solution M a c h i n e h a s v i b r a t i o n o r noi sy oper atio n when r unn ing. 1. Blade weld hits guides or teeth are broken. 2. Bent or worn out blade. 3. Motor or component is loose. 4. V-belt worn or loose. 5. Motor fan is rubbing on fan[...]

  • Page 58

    - 48 - G0 5 1 3X / G05 1 4X / G05 1 4X 3 E x treme Series Bandsaw Chec ki n g V - Belt T o ensure optimum power transmission from t he motor to the blade, the V-belt must be in g ood conditio n and operate under proper tension. The belt should be chec ked for cracks, fra ying, and wea r . Belt tension should be chec ked at least ev ery 3 months— [...]

  • Page 59

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -49 - Repl ac i ng V - Bel t T ools N e ede d : QTY Hex Wrench 6 mm ............................................... 1 W rench 1 3 mm .................................................... 1 T o r eplace the V-be lt : 1. DISCONNECT BANDSAW FROM POWER! 2. Open both wheel covers, and remove [...]

  • Page 60

    -50 - G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series Band saw Figure 61. The wheel brush. Wheel Brush Adjustment Screw Wheel Shaft Hinge Figure 60. Tension lever adjustment components. Adjustment Gap 1 ⁄ 16 "- 3 ⁄ 16 " A dju s ti n g T ens i on Le v er The tension leve r has an adjustment screw that allows you to adjust how muc[...]

  • Page 61

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 5 1 - Wheel Al ign men t Figure 62. Dimensions of coplanarity gauge. Compone nts and H ardware Ne ede d : Qt y 60" Long 2x4 ..................................................... 1 Tools Needed: Wrench 13mm ................................................... 1 Tape Measure .......[...]

  • Page 62

    -52- G05 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw 5. Adjust the tracking knob to get both wheels parallel. If the wheels won’t go parallel to each other, then move the lower wheel at the adjustment hub ( Figure 64 ) so they line up. 6. If the wheels will go parallel but not coplanar, shim the required wheel out as necessary, usin[...]

  • Page 63

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -53 - G0 5 1 3 X Electr ic al Com pon en ts Sw it ch W iri ng Mo to r Wi rin g To Power Supply To Motor[...]

  • Page 64

    -5 4 - G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw G0 5 1 3 X Wir in g Dia gr am G0513X Wiring Diagram       [...]

  • Page 65

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -55 - G0 5 1 4 X Electr ical Com po nen ts Po we r Sup pl y Jun ct io n Blo ck Mo to r Wi rin g Co nt rol Pan el Wiri ng Ma gn eti c Swi tc h Wi ri ng To Motor To Junction Box To Control Panel POWER ON OFF[...]

  • Page 66

    -56 - G05 1 3 X / G05 1 4X / G05 1 4X 3 E x treme Series Bandsaw G0 5 1 4 X Wi r i n g Diag ra m               ?[...]

  • Page 67

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -57 - G0 5 1 4 X3 E lectr ica l Com ponen ts Mo to r Wir ing (220 V) Co nt rol Pan el Wiri ng POWER ON OFF Ma gn eti c Swi tc h Wi ri ng To Motor To Junction Box To Control Panel Po we r Sup pl y Jun ct io n Blo ck[...]

  • Page 68

    -58 - G 05 1 3 X / G05 1 4 X /G 05 1 4X 3 E x treme Series Bandsaw G0 5 1 4 X3 Wi ri n g Dia gra m               [...]

  • Page 69

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -59 -                                         ?[...]

  • Page 70

    - 60 - G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series Band saw                              ?[...]

  • Page 71

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 6 1 - REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P0513X001 BUSHING 54 PCB23M CARRIAGE BOLT M8-1.25 X 80 2 PSS01M SET SCREW M6-1 X 10 55 P0513055 UPPER WHEEL COVER 3 P0513X003 BUSHING 56 PB10M HEX BOLT M6-1 X 25 4 P0513004 LIFTING EYE BOLT M10-1.5 57 PW03M FLAT WASHER 6MM 5 P05130[...]

  • Page 72

    - 62- G05 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw REF PART # DESCRIPTION REF PART # DESCRIPTION 99 PN02M HEX NUT M10-1.5 121-29 PH7587029 SPACER PLATE 100 P0513100 SMALL GEAR 122 P0513X122 GEAR 101 P0513X101 LOCK HANDLE 123 P0513X123 FIXED BOLT 102 P0513102 TRUNNION SUPPORT BRACKET 124 P0513X124 COVER 103 PLW06M LOCK WASHER 10MM 1[...]

  • Page 73

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -63 -                  G0 5 1 3 X L abels Safety labels warn about machine hazards and ways to prevent injury. The owner of this machi[...]

  • Page 74

    - 64 - G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw                                   [...]

  • Page 75

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -65 -                              [...]

  • Page 76

    - 66 - G05 1 3X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw                  G0 5 1 4 X / G 0 5 1 4 X3 L abels Safety labels warn about machine hazards and ways to prevent injury. The owne[...]

  • Page 77

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw - 67 - REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PSS01M SET SCREW M6-1 X 10 49 PSB04M CAP SCREW M6-1 X 10 2 PFS07M FLANGE SCREW M5-.8 X 10 50 P0513050 CLEAR WINDOW 3 P0513X003 BUSHING 51 PSB02M CAP SCREW M6-1 X 20 4 P0513004 LIFTING EYE BOLT M10-1.5 52 P0514X052 BUSHING 5 P0514005[...]

  • Page 78

    - 68 - G0 5 1 3X / G0 5 1 4 X / G0 5 1 4 X3 Ex treme Series Band saw REF PART # DESCRIPTION REF PART # DESCRIPTION 83 PB32M HEX BOLT M10-1.5 X 25 125-3 PH7587003 FIXED SHAFT 84 PLW06M LOCK WASHER 10MM 125-4 PH7587004 SHAFT 85 P0513085 MOTOR BRACKET 125-5 PH7587005 SPRING PIECE 86 PSBS01M BUTTON HD CAP SCR M8-1.25 X 20 125-6 PH7528004 ADJUSTMENT HAN[...]

  • Page 79

    G05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series B andsaw -69 - REF PART # DESCRIPTION REF PART # DESCRIPTION 144 PSB02M CAP SCREW M6-1 X 20 158 PN04M HEX NUT M4-.7 145 P0514X145 LOCATE BUSHING 159 PS23M PHLP HD SCR M5-.8 X 12 146 P0513X130 BUSHING 160 P0514X160 STRAIN RELIEF 20MM 147 PSBS01M BUTTON HD CAP SCR M8-1.25 X 20 161 P0514X161 MAG SW[...]

  • Page 80

    - 70- G 05 1 3 X / G0 5 1 4 X / G0 5 1 4 X 3 Ex treme Series Band saw Grizzly Industrial, Inc. warrants ev ery prod uct it sells for a period of 1 year to the original purchaser from the date of purchase. This warran t y does not apply to defects d ue directly or indirectly to misuse, abuse, negligence, accid ents, repairs or alterations or lack of[...]

  • Page 81

             ?[...]

  • Page 82

                                   ?[...]

  • Page 83

    [...]

  • Page 84

    B uy Dir ect and S ave with Gr izzl y ® – T r usted, Pr oven and a Gr eat V alue ! ~Since 1983~ ORDER 24 HOURS A DA Y! 1-800-523-4777 Visit Our Website Today For Current Specials![...]