Go to page of
Similar user manuals
-
Indoor Fireplace
Hearth and Home Technologies SFE-MKLB3530PP
9 pages 0.86 mb -
Indoor Fireplace
Hearth and Home Technologies SL-750TR-IPI-E
87 pages 7.41 mb -
Indoor Fireplace
Hearth and Home Technologies NBV3630I
56 pages 4.26 mb -
Indoor Fireplace
Hearth and Home Technologies TIARA I-B
60 pages 6.44 mb -
Indoor Fireplace
Hearth and Home Technologies QV32B-A
72 pages 4.1 mb -
Indoor Fireplace
Hearth and Home Technologies 839-1440
56 pages 3.83 mb -
Indoor Fireplace
Hearth and Home Technologies WHB33
4 pages 0.89 mb -
Indoor Fireplace
Hearth and Home Technologies Columbia Bay
2 pages 0.35 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Hearth and Home Technologies QV32B-A, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Hearth and Home Technologies QV32B-A one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Hearth and Home Technologies QV32B-A. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Hearth and Home Technologies QV32B-A should contain:
- informations concerning technical data of Hearth and Home Technologies QV32B-A
- name of the manufacturer and a year of construction of the Hearth and Home Technologies QV32B-A item
- rules of operation, control and maintenance of the Hearth and Home Technologies QV32B-A item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Hearth and Home Technologies QV32B-A alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Hearth and Home Technologies QV32B-A, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Hearth and Home Technologies service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Hearth and Home Technologies QV32B-A.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Hearth and Home Technologies QV32B-A item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 1 • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - DO NOT try to light any appliance. - DO NOT touch any electrical switch. DO NOT use any phone in your building. - Immediately ca[...]
-
Page 2
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 2 Not for use with solid fuel. ( Ne doit pas entre utilise avec un combustible solide). This appliance must be installed in a ccordance with local codes, if any; if not, follow ANSI Z 223.1 in th e US A or CAN/CG A B149 installation codes. (Installer l’ appa re il selon les codes ou r[...]
-
Page 3
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 3 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a hazardous situation which[...]
-
Page 4
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 4 = Contains updated information. 13 Finishing A. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 52 B. Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 14 Appliance Setup A. Remove Fixed Glass Assembly . . . . . . . . . [...]
-
Page 5
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 5 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric he[...]
-
Page 6
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 6 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS: 7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGW KURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU $ OLVWRI ++7DXWKRUL]HGGHDOHUVLVDYDLODEOHRQWKH++7[...]
-
Page 7
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 7 B. T empered Glass Speci fi cations Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous loca- tions such as bathtub enclosures as de fi ned by the Con- sumer Product Safety Commission (CPSC). The tempered glass has been tested an[...]
-
Page 8
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 8 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth and where the si[...]
-
Page 9
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 9 Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions. Failure to operate fi replace according to operating instructions could cause fi re or injury . DECORA TIVE DOORS (NOT SHOWN) SECTION[...]
-
Page 10
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 10 D. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. Figure 2.2 Clear Sp[...]
-
Page 11
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 1 1 I. Lighting Instructions (Standing Pilot) 1. Turn of f all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel. 3. Move switch to “OFF” position. 4. Push in gas control knob slightly and turn clock- wise to OFF”. DO NOT force. 5. Close[...]
-
Page 12
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 12 J. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the fi replace of f and allow it to completely cool. • Remove fi xed glass assembly . See Section 14.G. • Clean fi xed glass assembly . See [...]
-
Page 13
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 13 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming glass • Avoid abrasive cleane[...]
-
Page 14
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 14 B. Maintenance T asks-Quali fi ed Service T echnician The following tasks must be performed by a quali fi ed ser- vice technician. Gasket Seal and Glass Assembly Inspection Frequency: Annually By: Quali fi ed Service T echnician T ools needed: Protective gloves, drop cloth and a s[...]
-
Page 15
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 15 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Figure 4.1 T ypical System HORIZONT AL TERMINA TION CAP (SE[...]
-
Page 16
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 16 B. Design and Installation Considerations Quadra-Fire direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required. Installation MUST comply[...]
-
Page 17
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 17 5 5 F raming and Clearances A. Selecting Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1). W ARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service acces[...]
-
Page 18
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 18 C B D A B. Constructing the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should be enclosed inside the chase. NOTICE: T reatment of ceiling fi restops and wall shield fi restops and c[...]
-
Page 19
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 19 D. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing or fi nishing material closer than the minimums listed must be constructed entirely of noncom- bustible materials (i.e., steel studs, concrete board, etc). Figure 5.[...]
-
Page 20
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 20 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .................................................1.25* Over 7/12 to 8/12 .................................................1.5[...]
-
Page 21
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 21 Figure 6.3 Minimum Clearances for T ermination O N P R Q X = AIR SUPPL Y INLET A = 12 inches................. clearances above grade, veranda, porch, deck or balcony B = 12 inches................. clearance to window or door that may be opened, or to permanently closed window C = 18 [...]
-
Page 22
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 22 A. Approved Pipe This appliance is approved for use with Hearth & Home T echnologies DVP or SLP venting systems. Refer to Sec- tion 16B for vent component information. DO NOT mix pipe, fi ttings or joining methods from differ- ent manufacturers. The pipe is tested to be run insi[...]
-
Page 23
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 23 E. Use of Flex V ent The fl ex vent must be supported with the spacing between support intervals not exceeding 4 feet, with no more than 1/2 inch sag between supports. A support is required at each change in venting direction, and in any location where it is necessary to maintain th[...]
-
Page 24
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 24 F . V ent Diagrams Figure 7.4 Note: T here MUST b e a 25% reduc tion in total H w hen using fl ex vent exc ep t wh en using the si mple up and out installation (see Figure 5.3 ). Note: Use SL P Series components only . T op V ent - Horizontal T ermination V enting with 1 elbow (NG) [...]
-
Page 25
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 25 Figure 7.5 T op V ent - Horizontal T ermination V enting with 2 elbows (NG) T op V ent - Horizontal T ermination V enting with 2 elbows (Propane) Note: T here MUST b e a 25% reduc tion in total H w hen using fl ex vent exc ep t wh en using the si mple up and out installation (see Fi[...]
-
Page 26
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 26 Figure 7.6 T op V ent - Horizontal T ermination V enting with 3 elbows (NG) T op V ent - Horizontal T ermination V enting with 3 elbows (Propane) Note: T here MUST b e a 25% reduc tion in total H w hen using fl ex vent exc ep t wh en using the si mple up and out installation (see Fi[...]
-
Page 27
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 27 T op V ent - V ertical T ermination No Elbow V 1 = 60 ft. Max. (18.3 m) Figure 7.8 INNER HEA T SHIELD T op V ent Application Rear V ent Application Note : Be sure to re- install the inner heat shield after exhaust restrictor installation. Figure 7.7 Exhaust restrictors are recommende[...]
-
Page 28
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 28 Figure 7.9 T op V ent - V ertical T ermination V enting with 2 elbows (NG) T op V ent - V ertical T ermination V enting with 2 elbows (Propane) Note: T here MUST b e a 25% reduc tion in total H w hen using fl ex vent exc ep t wh en using the si mple up and out installation (see Figu[...]
-
Page 29
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 29 Figure 7.10 T op V ent - V ertical T ermination V enting with 3 elbows (NG) T op V ent - V ertical T ermination V enting with 3 elbows (Propane) Note: T here MUST b e a 25% reduc tion in total H w hen using fl ex vent exc ep t wh en using the si mple up and out installation (see Fig[...]
-
Page 30
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 30 V 1 H 1 V 2 V 3 H 2 T op V ent - V ertical T ermination - (continued) Four 90º Elbows V 1 Min. H 1 Max. V 2 Min. H 2 Max. V 3 Min. 1-1/2 ft. 457 mm 4 ft. 1.2 m 4 ft. 1.2 m 4 ft. 1.2 m 3-1/2 ft. 1.0 m V 1 + V 2 + V 3 + H 1 + H 2 Maximum= 40 ft. (12.2 m) Figure 7.1 1 Note : Use SLP Se[...]
-
Page 31
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 31 Figure 7.12 H 1 = 24 in. (71 1 mm) Maximum Rear V ent - Horizontal T ermination No Elbows Rear V ent - Horizontal T ermination V enting with 2 elbows H 1 MAX. V 1 MIN. H 2 MAX. H 1 + H 2 MAX. 1-1/2 ft. 457 mm Back to back elbows 1 ft. 305 mm 2-1/2 ft. 762 mm 3 ft. 914 mm 1 ft. 305 mm[...]
-
Page 32
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 32 Rear V ent - Horizontal T ermination V enting with 3 elbows H 1 MAX. V 1 MIN. H 1 + H 2 MAX. H 1 + H 2 + H 3 MAX. 1-1/2 ft. 457 mm Back to back elbows 1 ft. 305 mm 2-1/2 ft. 762 mm 3-1/2 ft. 1.1 m 1 ft. 305 mm 2 ft. 610 mm 5-1/2 ft. 1.7 m 5-1/2 ft. 1.7 m 2 ft. 610 mm 4 ft. 1.2 m 9-1/[...]
-
Page 33
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 33 INST ALLED HORIZONT ALL Y H 1 H 2 V 2 Figure 7.16 Rear V ent - V ertical T ermination V enting with 2 elbows V 1 MIN. H 1 MAX. H 2 MAX. H 1 + H 2 MAX. Back to back elbows 1-1/2 ft. 457 mm 1 ft. 305 mm 2-1/2 ft. 762 mm 1 ft. 305 mm 3-1/2 ft. 1.1 m 3 ft. 914 mm 6-1/2 ft. 2.0 m 2 ft. 61[...]
-
Page 34
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 34 Clearances to Combustibles: Refer to Section 5 for clearances to the appliance, man- tel, mantel legs and wall projection. Refer to Section 8 for pipe clearances to combustibles. T ermination Cap For installation of termination cap see minimum vent heights for various pitched roofs. [...]
-
Page 35
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 35 EXISTING CHIMNEY HEARTH FLOOR EXISTING CHIMNEY EXHAUST AIR VENT PIPE INLET AIR VENT PIPE T o minimize cold air drafts, seal with non-combustible insulation. TERMINA TION CAP DIRECT VENT FIREPLACE V TERMINA TION CAP EXISTING CHIMNEY EXISTING CHIMNEY EXHAUST AIR VENT PIPE V FLOOR HEART[...]
-
Page 36
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 36 A. Pipe Clearances to Combustibles W ARNING! Risk of Fire! Maintain air space clearance to vent. DO NOT pack insulation or other combustibles: • Between ceiling fi restops • Between wall shield fi restops • Around vent system Failure to keep insulation or other material away [...]
-
Page 37
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 37 C. Install the Ceiling Firestop A ceiling fi restop MUST be used between fl oors and attics. • DVP pipe only - Frame an opening 10 in. by 10 in. (254 mm by 254 mm) whenever the vent penetrates a ceiling/ fl oor (see Figure 8.3). • SLP pipe only - Frame opening 9 in. x 9 in. (2[...]
-
Page 38
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 38 D. Install Attic Insulation Shield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. The National Fuel Gas Code ANSI Z223.1 and NFPA 54 requires an attic shield constructed of 26 ga[...]
-
Page 39
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 39 CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during installa- tion. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. A. T op V ent 9 9 Appliance Preparation Fig[...]
-
Page 40
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 40 B. Rear V ent NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. NOTICE: Once the seal cap has been removed it CANNOT be reattached. Figure 9.8 Fold the tabs toward the center of the fi re plug (90°) and remove the insulation gasket. Fig[...]
-
Page 41
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 41 C. Securing and Leveling the Appliance W ARNING! Risk of Fire! Prevent contact with: • Sagging or loose insulation • Insulation backing or plastic • Framing and other combustible materials Block openings into the chase to prevent entry of blown- in insulation. Make sure insulat[...]
-
Page 42
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 42 1 0 10 Inst alling V ent Pipe ( DVP and S LP Pi p e ) A. Assemble V ent Sections (DVP Pipe Only) Attach V ent to the Firebox Assembly Note: The end of the pipe sec tions wi t h the lanced tabs wi ll face toward the appliance. Attach the fi rst pipe section to the starting collar: ?[...]
-
Page 43
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 43 B. Assemble V ent Sections (SLP Pipe Only) T o attach the fi rst vent component to the starting collars of the appliance: • Lock the vent components into place by sliding the pipe section onto the collar . • Align the seam of the pipe and seam of collar to allow engagement. Rota[...]
-
Page 44
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 44 120º Figure 10.8 Securing V ertical Pipe Sections 120º Figure 10.9 Securing Horizontal Pipe Sections E. Disassemble V ent Sections • Rotate either section (see Figure 10.10) so the seams on both pipe sections are aligned as shown in Figure 10.1 1. • Pull carefully to separate t[...]
-
Page 45
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 45 F . Install Decorative Ceiling Components (SLP only) A decorative ceiling thimble can be installed on a fl at ceil- ing through which the vent passes. The decorative ceiling thimble is used to cover the fi restop. • Seal the gap between the vent pipe and fi restop using silicone[...]
-
Page 46
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 46 G. Install Metal Roof Flashing • See minimum vent heights for various pitched roofs (Figure 10.14) to determine the length of pipe to extend through the roof. • Slide the roof fl ashing over the pipe sections extending through the roof as shown in Figure 10.15. Roof Pitch H (Min[...]
-
Page 47
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 47 SCREWS CAULK STORM COLLAR (1 of 3) Figure 10.18 Figure 10.18 TERMINA TION CAP I. Install V ertical T ermination Cap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner fl ue of the pipe section while placing the outer collar of the cap over [...]
-
Page 48
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 48 Figure 10.20 V enting through the wall INTERIOR HEA T SHIELD OR EXTENDED HEA T SHIELD W ALL SHIELD FIRESTOP HEA T SHIELD 1-1/2 IN. (38 MM) MIN. OVERLAP SHEA THING VENT DEPTH FROM BACK OF APPLIANCE T O OUTSIDE SURF ACE OF EXTERIOR WALL (SEE CHART BELOW) SLIP SECTION CAN BE EXTENDED IN[...]
-
Page 49
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 49 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies speci fi ed and approved parts. B. Gas Pressure • Optimum appliance performance requires prop[...]
-
Page 50
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 50 B. Standing Pilot Ignition System Wiring • The standing pilot ignition system wiring does not require a 1 10 V AC supply to operate. See Figure 12.1. • A 1 10 V AC junction box MUST be installed for use with a fan or remote control. See Figure 12.2 for junction box wiring. Keep w[...]
-
Page 51
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 51 F . W all Switch Installation for Fan (Optional) If the box is being wired to a wall mounted switch for use with a fan (See Figure 12.3): • The power supply for the appliance must be brought into a switch box. • The power can then be supplied from the switch box to the appliance [...]
-
Page 52
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 52 A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing closer than the minimums list- ed must be constructed entirely of noncombustible materials (i.e., steel studs, concrete board, etc.). Figure 13.1 Minimum V ertical an[...]
-
Page 53
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 53 B. Facing Material • Metal front faces may be covered with non-combustible materials only . • Facing and/or fi nishing materials must not interfere with air fl ow through louvers, operation of louvers or doors, or access for service. • Facing and/or fi nishing materials must[...]
-
Page 54
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 54 A. Remove Fixed Glass Assembly See Section 14.G. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the fi rebox or underneath in the control cavity . D.[...]
-
Page 55
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 55 F . Install the Log Assembly If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately , refer to the following instructions. 2014-925B 6/03 Log Set Assembly: LOGS-2014 Model: QV32B-A 4 5 1 2 3 STEP 1: Carefully remov[...]
-
Page 56
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 56 STEP 1: Carefully remove the logs from the packaging. CAUTION: Logs are fragile! 2016-925B 6/03 STEP 2: LOG #1 (SRV2016-701): Place notches of log #1 on outer two grate tines, and push against back of fi rebox. Log Set Assembly: LOGS-2016 Model: QV36B-A SAME SAME LOG LOG 4 5 1 2 3 1[...]
-
Page 57
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 57 J. Install Hood The hood is shipped with the front/door . K. Air Shutter Setting Air shutter settings should be adjusted by a quali fi ed ser- vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjust air shutter for lon[...]
-
Page 58
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 58 A. Standing Pilot Ignition System 1 5 15 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed service technician in th[...]
-
Page 59
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 59 T roubleshooting (continued) Symptom Possible Cause Corrective Action 3. (Continued) C. V alve. T urn the valve knob to the ON position. Place the ON/ OFF switch in the ON position. T ake a reading with a millivolt meter at the thermopile terminals. The millivolt meter should read gr[...]
-
Page 60
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 60 1 6 16 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only. For framing dimensions and clearances refer to Section 5. Figure 16.1 Appliance Dimensions A B T E ELECTRICAL ACCESS S V C D U G F H J I K Ø R Ø L M N O P Q[...]
-
Page 61
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 61 B. V ent Components Diagrams Figure 16.2 DVP vent components Pipe Effective Length Inches Millimeters DVP4 4 102 DVP6 6 152 DVP12 12 305 DVP24 24 610 DVP36 36 914 DVP48 48 1219 DVP6A 3 to 6 76 to 152 DVP12A 3 to 12 76 to 305 DVP12MI 3 to 12 76 to 305 DVP24MI 3 to 24 76 to 610 10-1/2 [...]
-
Page 62
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 62 DVP-TRAP1 DVP-TRAP2 DVP-TRAPK2 DVP-TRAPK1 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in. (203 mm) Max Effective Length Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in[...]
-
Page 63
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 63 13-1/4 in. (367 mm) 24-5/8 in. (625 mm) 27-1/2 in. (127 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (367 mm) RF12M Roof Flashing Multi-pak BEK Trap Ca p Brick Extension 13-3/4 in. (349 mm) 5 in. (127 mm) 13-3/4 in. (349 mm) Cap Shield DRC-RADIUS 13[...]
-
Page 64
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 64 B. V ent Components Diagrams (continued) Figure 16.5 SLP Series V ent Components 8-3/4 in. 222 mm 6-1/2 in. 165 mm 6-5/8 in. 168 mm 6 in. 152 mm 6-1/2 in. 165 mm 6-5/8 in. 168 mm 9-7/8 in. 251 mm 6-1/2 in. 165 mm 9-1/4 in. 235 mm SLP45 45° Elbow SLP90 90° Elbow Effective Height/ Le[...]
-
Page 65
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 65 B. V ent Components Diagrams (continued) Figure 16.6 SLP Series V ent Components SLP-SNKD Snorkel T ermination Cap SLP-TVHW V ertical T ermination Cap SLP-FLEX-TRAP Horizontal T ermination Kit SLP-CCS-BK Cathedral Ceiling Support Box-Black SLP-DCF-BK Ceiling Firestop Black SLP-WT -BK[...]
-
Page 66
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 66 Figure 16.7 Coaxial to Colinear V ent Components LINK-DV30B Flex Liner Kit DV -46DV A-GCL Coaxial/Colinear Appliance Connector COAXIAL to COLINEAR VENTING B. V ent Components Diagrams (continued)[...]
-
Page 67
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 67 C. Service Parts QV32B-A Beginning Manufacturing Date: June 2003 Ending Manufacturing Date: ______ R 32” Direct V ent Gas Fireplace IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial numbe[...]
-
Page 68
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 68 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMMENTS P ART NUMBER[...]
-
Page 69
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 69 #12 Burner/V alve Assembly Part number list on following page. 12.1 12.8 12.7 12.6 12.5 12.4 12.3 12.2 12.13 12.14 12.15 12.12 12.1 1 12.10 12.9 QV32B-A, QV36B-A Beginning Manufacturing Date: June 2003 Ending Manufacturing Date: ______ Service Parts R[...]
-
Page 70
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 70 C. Service Parts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DESCRIPTION COMM[...]
-
Page 71
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 71 Service Parts QV32B-A, QV36B-A IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked at Depot ITEM DE[...]
-
Page 72
Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev . U • 1/12 72 Quadra-Fire, a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .quadra fi re.com D. Contact Information Please contact your Quadra-Fire dealer with any questions or concerns. For the location of your nearest Quadra-Fire dealer , please [...]