Heat & Glo LifeStyle 6000C manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Heat & Glo LifeStyle 6000C, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Heat & Glo LifeStyle 6000C one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Heat & Glo LifeStyle 6000C. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Heat & Glo LifeStyle 6000C should contain:
- informations concerning technical data of Heat & Glo LifeStyle 6000C
- name of the manufacturer and a year of construction of the Heat & Glo LifeStyle 6000C item
- rules of operation, control and maintenance of the Heat & Glo LifeStyle 6000C item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Heat & Glo LifeStyle 6000C alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Heat & Glo LifeStyle 6000C, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Heat & Glo LifeStyle service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Heat & Glo LifeStyle 6000C.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Heat & Glo LifeStyle 6000C item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 1 • DO NOT store or use gasoli ne or other am- mab le vap or s an d l iqu id s in th e v ici nit y o f t his or any other appliance. • Whattodoifyousmellgas - DO NOT try to light any appliance. - DO NOT touch any electrical switch. DO [...]

  • Page 2

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 2 ListingLabelInformation/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on replace: _____________________ Dealership purchased[...]

  • Page 3

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 3 Safety AlertKey: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION![...]

  • Page 4

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 4  = Contains updated information. F . Junction Box Installation. . . . . . . . . . . . . . . . . . . . . . . . . . 55 G. W all Switch Installation for Fan (Optional) . . . . . . . . . . . . 55 13Finishing  A. Mantel and Wall Projections . . . . . . . . [...]

  • Page 5

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 5 B. LimitedLifetimeW arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, [...]

  • Page 6

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 6 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor . A list of HHT authorized dealers is available on the HHT branded websites. • This warranty is o[...]

  • Page 7

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 7 B. T emperedGlassSpecications Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous loca- tions such as bathtub enclosures as dened by the Con- sumer Product Safety Commission (CPSC). The tempered [...]

  • Page 8

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 8 E. N on-C omb us tib leMa teri als Spec icat ion Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or any combination thereof. Materials that are repor[...]

  • Page 9

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 9 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operat[...]

  • Page 10

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 10 Figure2.1GeneralOperatingParts B. Y ourFireplace W ARNING! DO NOT operate replace before read - ing and understanding operating instructions. Failure to operate replace according to operating instructions could cause re or injury . D[...]

  • Page 11

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 1 1 D. ClearSpace W ARNING! DO NOT place combustible objects in front of the replace or block louvers. High temperatures may start a re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these obj[...]

  • Page 12

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 12 J. BeforeLightingFireplace Before operating this replace for the rst time, have a qualiedservicetechnician : • V erify all shipping materials have been removed from inside and/or underneath the rebox. • Review proper placement[...]

  • Page 13

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 13 K. LightingInstructions(IPI) 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand. 2. W ait ve (5) minu tes to c lea r out any gas. The n smell for gas , inclu din g nea[...]

  • Page 14

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 14 L. LightingInstructions(StandingPilot) 1. T urn of f all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel. 3. Move switch to “OFF” position. 4. Push in gas control knob slightly and turn clock- wise to [...]

  • Page 15

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 15 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool. • Remove xed glass assembly . See Section 14.H. • Cl ean xed gl as s as se mb ly . S ee Se[...]

  • Page 16

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 16 GlassCleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming [...]

  • Page 17

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 17 V enting Frequency: Seasonally By: Homeowner T oolsneeded: Protective gloves and safety glasses. • Inspect venting and termination cap for blockage or obstruc tion such plants, bird nests, leaves, snow , debris, etc. • V erify termi nat ion cap[...]

  • Page 18

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 18 Figure3.1IPIPilotFlamePatterns Figure3.2StandingPilotFlamePatterns C. Refractory ,GrateandV alve Assembly Removal It may become necessary to remove the refractory , grate and valve assemblies. This task should[...]

  • Page 19

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 19 Figure3.5V alveAssemblyRemoval NOTCH LOCA TION NG LP 6000C 6000CL 6000CLX 6000CBV 8000C 8000CL 8000CLX 8000CBV Figure3.6BurnerIdentication D. BurnerIdentication/V erication The burner may be accessed for identication a[...]

  • Page 20

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 20 A. T ypical ApplianceSystem NOTICE: Illustrations and photos reect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Figure4.1 T ypicalSyste[...]

  • Page 21

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 21 B. DesignandInstallationConsiderations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is r[...]

  • Page 22

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 22 5 F ramingandC learances  A. Selecting ApplianceLocation Whe n sele cting a locat ion for the appli anc e it is impor tan t to con sid er the requ ire d c lea ran ces to w all s ( see Fi gure 5.1 ). W ARNING! Risk of Fire or Burns! Provide ad[...]

  • Page 23

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 23 B. Constructingthe ApplianceChase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should be enclosed inside the chase. NOTICE: T reatment of ceiling restops and wall sh[...]

  • Page 24

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 24 D. MantelandW allProjections W ARN IN G! Ri sk of Fir e! Co mp ly wi th al l mi nim um c le ar - an ces as spe ci ed. Fra min g or n ish ing mat eri al clo ser tha n th e min imu ms li ste d mu st be con str uc te d en tir ely of non com - bu st[...]

  • Page 25

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 25 A. V entT erminationMinimumClearances RoofPitch H(Min.)Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .................................................1.25* Over 7/12 to 8/12 .............[...]

  • Page 26

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 26 Figure6.3 MinimumClearancesforT ermination O N P R Q X = AIRSUPPL YINLET A = 12 inches.................clear ance s ab ove gra de, veranda, por ch, dec k o r b alc ony B = 12 inches.................cl ear ance to wind ow or door tha t may [...]

  • Page 27

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 27 A. ApprovedPipe This appliance is approved for use with Hearth & Home T echnologies DVP or SLP venting systems. Refer to Sec- tion 16B for vent component information. DO NOT mix pipe, ttings or joining methods from differ- ent manufacturers. The pipe[...]

  • Page 28

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 28 H 1 V 1 Figure7.3 T opV ent-HorizontalT ermination T opV ent-HorizontalT ermination OneElbow Note: For corner installations: A 6 inch (152 mm) section of straight pipe may need to be attached to the appliance before a 90º elbow , to[...]

  • Page 29

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 29 H 2 H 1 V 2 V 1 Figure7.5 T opV ent-HorizontalT ermination-(continued) ThreeElbows V 1 Min. H 1 Max. V 2 Min. H 2 Max. Elbow only 2 ft. 610 mm 0 in. 0 mm 1 ft. 305 mm 6 in. 152 mm 3 ft 914 mm 6 in. 152 mm 2 ft. 610 mm 1 ft. [...]

  • Page 30

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 30 EXHAUST SHIELD FLUE RESTRICTOR T opV ent-V erticalT ermination NoElbow Figure7.6 Note: If installing a vertical vent/ termination off the top of the ap- pliance, the ue restrictor should be used. V 1 V 1 =40ft.Max.(12.4m)[...]

  • Page 31

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 31 H 1 V 1 V 2 T opV ent-V erticalT ermination(continued) Figure7.1 1 T woElbows Figure7.10 4. Center the Flue Restrictor on vent and secure in place by using two self-tapping screws (see Figure 7.10). 5. Reinstall the Exhaust Shield. 3. Matc[...]

  • Page 32

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 32 Figure7.12 T opV ent-V erticalT ermination-(continued) ThreeElbows IN STALLE D HO R IZO NTALL Y H 1 H 2 V 1 V 2 V 1 H 1 +H 2 V 2 V 1 + V 2 Minimum  H 1 +H 2 Maximum Elbow only 1 ft. 305 mm * * * 1 ft. 305 mm 6 in[...]

  • Page 33

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 33 H 1 RearV ent-HorizontalT ermination Figure7.14 NoElbow One45ºElbow H 1 H 1 =16in.(406mm)Maximum Do not use a 45º elbow in corner installations. Use two 90º elbows instead. Figure7.13[...]

  • Page 34

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 34 INSTALLED HORIZONTALLY H 3 H 1 H 2 V 1 RearV ent-HorizontalT ermination-(continued) T woElbows Figure7.15 Figure7.16 ThreeElbows H 1 H 2 V 1 H 1 Maximum V 1 Minimum H 2 H 1 +H 2 Maximum 1 ft. 305 mm Back to Back 90º E[...]

  • Page 35

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 35 RearV ent-V erticalT ermination OneElbow Figure7.17 T woElbows Figure7.18 H 1 V 1 IN STALLE D HO RI ZO NTALL Y H 1 H 2 V 1 V 1 Minimum H 1 Maximum 6 in. 152 mm 2 ft. 610 mm 1 ft. 305 mm 3 ft. 914 mm 2 ft. 610 mm 5 ft. 1.5 m 3 f[...]

  • Page 36

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 36 RearV ent-V erticalT ermination-(continued) ThreeElbows Figure7.19 ThreeElbows Figure7.20 INST ALLED HORIZONT ALL Y H 3 H 1 H 2 V 1 V 2 V 1 H 2 H 1 H 1 H 2 H 3 V 1 Minimum H 1 +H 2 +H 3 Maximum * * * 8 ft. 2.4[...]

  • Page 37

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 37 EXHAUST VENT PIPE INLET AIR VENT PIPE Figure7.21.Coaxial/Colinear ApplianceConnector OUTSIDE F ACE OF FIREPLACE TOP OF FIREPLACE OPENING SHADED AREA DEFINED AS “INSIDE EXISTING MASONR Y FIREPLACE” 3 IN. MIN. 5 IN. MIN. EXHAUST VENT PIPE Figure?[...]

  • Page 38

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 38 Figure7.23 EXISTING CHIMNEY HEARTH FLOOR EXISTING CHIMNEY EXHAUST AIR VENT PIPE INLET AIR VENT PIPE T o minimize cold air drafts, seal with non-combustible insulation. TERMINA TION CAP DIRECT VENT FIREPLACE V DVP-2SL COAXIAL/COLINEAR APPLIANCE CONNECTOR The fi[...]

  • Page 39

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 39 A* B* 10 in. 12 in. C D 10 in. 12 in. A. PipeClearancestoCombustibles W ARNING! Risk of Fire! Maintain air space clearance to vent. DO NOT pack insulation or other combustibles: • Between ceiling restops • Between wall shield restops • Aro[...]

  • Page 40

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 40 C. InstalltheCeilingFirestop A ceilin g restop MUST be used between oors and attics. • DVPpipeonly - Frame an opening 10 in. by 10 in. (254 mm by 254 mm) whenever t h e v e n t p e n e t r a t e s a c e i l i n g /  o o r ( s e e Figu[...]

  • Page 41

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 41 D. Install AtticInsulationShield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. The Na tio nal Fue l Gas Code ANSI Z22 3.1 an d NFPA 54 req uir e[...]

  • Page 42

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 42 CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. A. T opV ent 9 A[...]

  • Page 43

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 43 B. RearV ent CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. Fig[...]

  • Page 44

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 44 Figure9.14ProperPositioningandSecuringofan Appliance NAILING TABS (BOTH SIDES) PILOT HOLES Figure9.12Non-combustibleBoard C. InstallingtheNon-combustibleBoard The fact ory supp lie d non -co mbu sti ble b oar d spa [...]

  • Page 45

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 45 1 0 Inst allingV entPi pe(D VPandSLPP ipe )  A. AssembleV entSections(DVP PipeOnly) AttachV enttotheFirebox Assembly Not e: The en d of the p ipe se cti ons w ith th e lanc ed t abs wi ll fac e toward th[...]

  • Page 46

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 46 B. AssembleV entSections(SLP PipeOnly) T o attach the rst vent component to the starting collars of the appliance: • Attach a DVP-2SL or DVP-SLP24 adapter to the starting collar of the appliance. • Lock the vent components into place by s[...]

  • Page 47

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 47 120º Figure10.8SecuringV erticalPipeSections 120º Figure10.9SecuringHorizontalPipeSections E.  Di sa ss em bl e V en t S ec ti on s • Rotate either section (see Figure 10.10) so the seams on both pipe sections are [...]

  • Page 48

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 48 F . Install Decorative Ceiling Components (SLPonly) A decorative ceiling thimble can be installed on a at ceil- ing through which the vent passes. The decorative ceiling thimble is used to cover the restop. • Seal the gap between the ven[...]

  • Page 49

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 49 G. InstallMetalRoofFlashing • See minimum vent heights for various pitched roofs (Figure 10.14) to determine the length of pipe to extend through the roof. • Slide the roof ashing over the pipe sections extending through the roof as shown in Fi[...]

  • Page 50

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 50 SCREWS CAULK STORM COLLAR (1of3) Figure10.18 TERMINA TIONCAP I. InstallV erticalT erminationCap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner ue of the pipe section while placing the ou[...]

  • Page 51

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 51 Figure10.20V entingthroughthewall INTERIOR HEA T SHIELD OR EXTENDED HEA T SHIELD W ALL SHIELD FIRESTOP HEA T SHIELD 1-1/2 IN. (38 MM) MIN. OVERLAP SH EA TH IN G VENT DEPTH FROM BACK OF APPLIANCE T O OUTSIDE SURF ACE OF EXTERIOR W ALL (SEE CHART [...]

  • Page 52

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 52 A. FuelConversion • Mak e sure the applian ce is comp atib le with availab le gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies specied and approved parts. B. GasPressure • Optimum a[...]

  • Page 53

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 53 Figure12.1IgnitorButton C. StandingPilotIgnitionSystemWiring • The standin g pilot ignition system wiring does not requir e a 1 10 V AC supply to operate. See Figure 12.3 • A 1 10 V AC junction box MUST be installed for use with a f[...]

  • Page 54

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 54 Figure12.2IPIWiringDiagram TO JUNCTION BOX (1 10V) MODULE FLAME SENSE IGNITER RC100 RC200 (OPTIONAL W ALL CONTROLS) GROUND ORANGE (PILOT) GREEN (MAIN) BROWN BLACK RED BA TTER Y P ACK 6V DC FLAME MODULA TION THERMOST A T WIRE ASSEMBL Y / W ALL SWITCH W[...]

  • Page 55

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 55 G. W allSwitchInstallationforFan(Optional) If the box is being wired to a wall mounted switch for use with a fan (See Figure 12.5): • The power supply for the appliance must be brought into a switch box. • The power can then be supplied from[...]

  • Page 56

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 56 1 3 F inishing  A. MantelandW allProjections W ARN IN G! Ri sk of Fi re ! Com pl y wi th a ll mi ni mu m cl ear - an ces as sp ec ie d. Fr ami ng clo ser th an th e min imu ms li st - ed mu st be c on str uct ed en tir ely of no nc om bus tib[...]

  • Page 57

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 57 Figure13.4FinishingMaterial1InchThickorLess DOOR FIT FINISHMA TERIAL THICKNESS SEE FIGURE Folio Inside Any 13.6 Arcadia Overlap 1 inch or less 13.4 Inside Greater than 1 inch 13.5 Halston Overlap 1 inch or less 13.4 Inside Greater[...]

  • Page 58

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 58 DOOR FINISHING MA TERIAL FINISHING MA TERIAL C (Includes 1/8 in. opening each side of door) A (Outside door width) Finishing material thickness, 1-4 inches maximum B = T op of door to bottom of replace. D = Bottom of Finishing Material to Bottom of Fireplace A[...]

  • Page 59

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 59 FINISHING STRIPS REMOVED Figure13.7RemovingFinishingStrips. 31-7/8 IN. (6000) 33-1 1/16 IN. (8000) 3-3/4 IN. (6000, 8000) 35-5/16 IN. (6000) 43 IN. (8000) Figure13.8.CleanFaceDoorDimensions RemovalofFinishingStrips NOTICE[...]

  • Page 60

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 60 D. ElevatedHearthSystems Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various dimensions. Some hearth systems will elevate the appliance off the oor at a given dimension. For exa[...]

  • Page 61

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 61 A. RemoveFixedGlass Assembly See Section 14.H. B. RemovetheShippingMaterials Remove shipping materials from inside or underneath the rebox. C. Cleanthe Appliance Clean/vacuum any sawdust that may have accumulated inside the [...]

  • Page 62

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 62 G. InstalltheLog Assembly LogAssembly:LOGS-6C CAUTION: Logs are fragile, handle with care. Log #1(SR V2164-701) : Locate log placement tabs on the pilot cover . Bend tabs upward as shown in Figure 2. Locate the log placements slots on the [...]

  • Page 63

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 63 Figure7 2 3 1 Log #3 (SRV2164-703) : Mate the slot located on the bottom of Log #3 with the right log placement tab on top of Log #1. After slot and tab have been tted together , mate the groove located on the bottom of Log #3 with the horizontal grat[...]

  • Page 64

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 64 Models:8000C,8000C-LP ,8000C-IPI, 8000C-IPILP ,8000CBV -IPI Figure3 Figure4 GROOVES SLOTS Figure5 Figure6 1 2 1 LEFTGRA TETINE CAUTION: Logs are fragile, handle with care. Log #1 (SRV2168-701) : Locate log placement tabs [...]

  • Page 65

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 65 Figure7 2 3 1 1 2 3 4 Figure8 Figure9 Figure10 1 1 2 2 3 3 4 5 5 6 4 Log #3 (SRV2168-703) : Mate the slot located on the bottom of Log #3 with the right log placement tab on top of Log #1. After slot and tab have been tted together , mate the[...]

  • Page 66

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 66 Figure14.5 AirShutter Figure14.4FixedGlass Assembly H. FixedGlass Assembly W ARNING! Risk of Asphyxiation! Handle xed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, c[...]

  • Page 67

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 67 A. StandingPilotIgnitionSystem 1 5 T roubleshooting  With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qua[...]

  • Page 68

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 68 T roubleshooting(continued) Symptom PossibleCause Corrective Action 3. (Continued) C. V alve. T urn the valve knob to the ON position. Place the ON/ OFF switch in the ON position. T ake a reading with a millivolt meter at the thermopile terminals. The mi[...]

  • Page 69

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 69 B. IntelliFirePlus™IgnitionSystem Symptom PossibleCause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark. A. Incorrect wiring. V erify “S” wire (white) for sensor and “I” wire (orange) for ignitor [...]

  • Page 70

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 70 1 6 ReferenceMater ials  A. ApplianceDimensionDiagram Di me ns ion s ar e a ct ua l ap pli an ce di me ns ion s. U se f or re fe ren ce o nl y . Fo r fra mi ng di me ns io ns an d cl ear an ce s re fer t o Sec ti on 5 . Figure16.1 Appli[...]

  • Page 71

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 71 Figure16.2 ApplianceDimensions-8000Models     Location Inches Millimeters J 21 533 K 1 1-1 1/16 297 L 35-1/2 902 M 17-3/4 451 N 8-1/2 216 O 2-7/8 73 P 8-1/2 216 Q 1 25 R 42-7/8 1089 Location Inches Millimeters A 48 1219 B 43-1/[...]

  • Page 72

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 72 10-1/2 in. (267 mm) 10-7/8 in. (276 mm) 45 ° 7-3/8 in. (187 mm) 11-3/8 in. (289 mm) 1-1/4 in. (32 mm) 9-1/4 in. (235 mm) 13-1/4 in. (337 mm) 1/2 in. TYP DVP90ST (90° Elbow) 10 in. (254 mm) 10 in. (254 mm) 1 in. (25 mm) 12 in. (305 mm) 14 in. (356 mm) 1 in. (25 [...]

  • Page 73

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 73 DVP-HPC1 DVP-HPC2 DVP-TRAP1 DVP-TRAP2 DVP-HPCK1-B DVP-HPCK2-B DVP-TRAPK2 DVP-TRAPK1 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in. (203 mm) Max Effective Length Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The[...]

  • Page 74

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 74 13-1/4 in. (337 mm) 24-5/8 in. (625 mm) 27-1/2 in. (699 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (337 mm) RF12M Roof Flashing Multi-pak BEK Trap Ca p Brick Extension 13-3/4 in. (349 mm) 5 in. ( 1 2 7 m m) 13-3/4 in. (349 mm)[...]

  • Page 75

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 75 DVP-TB1 BasementVent Cap 12 in. (305 mm) 1-1/2 in. (38 mm) 7-3/8 in. (187 mm) 14 in. (356 mm) 17-3/4 in. (451 mm) 7-1/4 in. 12 in. 305 mm (184 mm) 5-1/4 in. (133 mm) 12-1/2 in. (318 mm) DVP-TVHW VerticalTermination Cap (Highwind) PVK-80 (Not compatible with Intel[...]

  • Page 76

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 76 OptionalWireHarness DESCRIPTION P ARTNUMBER 10 ft. PV Wire Harness PVI-WH10 20 ft. PV Wire Harness PVI-WH20 40 ft. PV Wire Harness PVI-WH40 60 ft. PV Wire Harness PVI-WH60 80 ft. PV Wire Harness PVI-WH80 100 ft. PV Wire Harness PVI-WH100 PVI-SLP Power[...]

  • Page 77

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 77 B. V entComponentsDiagrams (continued) DVP-HRC-SS DVP-HRC-ZC-SS HORIZONT ALTERMINA TIONCAP 13 in. (330 mm) 15 in. (381 mm) 8-1/8 in. (206 mm) 10-7/8 in. 276 mm 10-1/2 in. 267 mm 3° 87° Effective Length 5-3/4 to 8-3/8 in. 146 to 213 mm 5-1/2 in[...]

  • Page 78

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 78 B. V entComponentsDiagrams (continued) Figure16.8SLPSeriesV entComponents EffectiveHeight/Length Pipe inches mm SLP4 4 102 SLP6 6 152 SLP12 12 305 SLP24 24 610 SLP36 36 914 SLP48 48 1219 SLP6A 2 - 6 51 - 152 SLP1[...]

  • Page 79

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 79 B. V entComponentsDiagrams (continued) Figure16.9SLPSeriesV entComponents SLP-WT -BK W all Thimble-Black 26 in. 660 mm DVP-HSM-B Extended Heat Shield SLP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) Note: He[...]

  • Page 80

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 80 13 in. 330 mm 13 in. 330 mm 1-5/16 in. 34 mm 10-9/16 in. 269 mm 14 in. 356 mm 12-1/2 in. 318 mm 12 in. 305 mm SLP-CCS-BK Cathedral Ceiling Support Box-Black SLP-DCF-BK Ceiling Firestop Black SLK-SNKD Snorkel T ermination Cap SLP-TVHW V ertical T ermination Cap 13[...]

  • Page 81

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 81 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]

  • Page 82

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 82 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]

  • Page 83

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 83 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]

  • Page 84

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 84 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]

  • Page 85

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 85 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]

  • Page 86

    Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 86 D. ContactInformation Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & Glo dealer , please visit www .heatnglo.com. -NOTES- __________________________________________________________[...]